remove Location from extensions

3 files changed, 0 insertions, 332 deletions

diff --git a/extensions/Connection_Interface_Location.xml b/extensions/Connection_Interface_Location.xml
deleted file mode 100644
index 1e7bee4e..00000000
--- a/extensions/Connection_Interface_Location.xml
+++ /dev/null
@@ -1,330 +0,0 @@
-<?xml version="1.0" ?>
-<node name="/Connection_Interface_Location"
-  xmlns:tp="http://telepathy.freedesktop.org/wiki/DbusSpec#extensions-v0">
-  <tp:copyright>Copyright (C) 2008 Collabora Ltd.</tp:copyright>
-  <tp:copyright>Copyright (C) 2008 Nokia Corporation</tp:copyright>
-  <tp:license xmlns="http://www.w3.org/1999/xhtml">
-    <p>This library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Lesser General Public
-License as published by the Free Software Foundation; either
-version 2.1 of the License, or (at your option) any later version.</p>
-
-<p>This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Lesser General Public License for more details.</p>
-
-<p>You should have received a copy of the GNU Lesser General Public
-License along with this library; if not, write to the Free Software
-Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.</p>
-  </tp:license>
-  <interface name="org.freedesktop.Telepathy.Connection.Interface.Location.DRAFT"
-    tp:causes-havoc='experimental'>
-    <tp:requires interface="org.freedesktop.Telepathy.Connection"/>
-
-    <tp:docstring xmlns="http://www.w3.org/1999/xhtml">
-      <p>An interface on connections to support protocols which allow users to
-        publish their current geographical location, and subscribe to the
-        current location of their contacts.</p>
-
-      <p>This interface is geared strongly towards automatic propagation and
-        use of this information, so focuses on latitude, longitude and
-        altitude which can be determined by GPS, although provision is also
-        included for an optional human-readable description of locations. All
-        co-ordinate information is required to be relative to the WGS84
-        datum.</p>
-
-      <p>The information published through this interface is intended to have
-        the same scope as presence information, so will normally be made
-        available to those individuals on the user's "publish" contact list.
-        Even so, user interfaces should not automatically publish location
-        information without the consent of the user, and it is recommended
-        that an option is made available to reduce the accuracy of the
-        reported information to allow the user to maintain their privacy.</p>
-
-      <p>Location information is represented using the terminology of XMPP's
-        <a href="http://www.xmpp.org/extensions/xep-0080.html">XEP-0080</a>
-        or the XEP-0080-derived
-        <a href="http://geoclue.freedesktop.org/">Geoclue</a> API where
-        possible.</p>
-    </tp:docstring>
-
-    <tp:enum name="Location_Accuracy_Level" type="i">
-      <tp:docstring>
-        A location accuracy level. This should be kept in sync with
-        GeoclueAccuracyLevel in the Geoclue project.
-      </tp:docstring>
-
-      <tp:enumvalue suffix="None" value="0">
-        <tp:docstring>
-          The accuracy is unspecified.
-        </tp:docstring>
-      </tp:enumvalue>
-      <tp:enumvalue suffix="Country" value="1">
-        <tp:docstring>
-          The location indicates the contact's country.
-        </tp:docstring>
-      </tp:enumvalue>
-      <tp:enumvalue suffix="Region" value="2">
-        <tp:docstring>
-          The location indicates the contact's region within a country.
-        </tp:docstring>
-      </tp:enumvalue>
-      <tp:enumvalue suffix="Locality" value="3">
-        <tp:docstring>
-          The location indicates the contact's locality within a region
-          (e.g. the correct city).
-        </tp:docstring>
-      </tp:enumvalue>
-      <tp:enumvalue suffix="Postal_Code" value="4">
-        <tp:docstring>
-          The location indicates the correct postal code.
-        </tp:docstring>
-      </tp:enumvalue>
-      <tp:enumvalue suffix="Street" value="5">
-        <tp:docstring>
-          The location indicates the correct street.
-        </tp:docstring>
-      </tp:enumvalue>
-      <tp:enumvalue suffix="Detailed" value="6">
-        <tp:docstring>
-          The location's accuracy is given by the error, horizontal-error-m
-          and/or vertical-error-m keys.
-        </tp:docstring>
-      </tp:enumvalue>
-    </tp:enum>
-
-    <tp:mapping name="Location">
-      <tp:docstring>
-        A user's location, represented as an extensible mapping.
-      </tp:docstring>
-
-      <tp:member name="Key" type="s">
-        <tp:docstring xmlns="http://www.w3.org/1999/xhtml">
-
-          <p>Civic addresses are represented by the following well-known
-            keys (all of which have string values), which should be kept in
-            sync with those used in XEP-0080 and in the Geoclue project:</p>
-
-          <ul>
-            <li>countrycode - s: an ISO-3166-1 alpha-2 (two-letter) country
-              code, e.g. "us", "gb", "fr"</li>
-            <li>country - s: a country name in unspecified locale, e.g.
-              "USA"</li>
-            <li>region - s: an administrative region of the nation, such as a
-              state or province</li>
-            <li>locality - s: a locality within the administrative region, such
-              as a town or city</li>
-            <li>area - s: a named area such as a campus or neighborhood</li>
-            <li>postalcode - s: a code used for postal delivery</li>
-            <li>street - s: a thoroughfare within the locality, or a crossing of
-              two thoroughfares</li>
-          </ul>
-
-          <p>The following address keys are defined in XEP-0080 but not by
-            Geoclue, and are also allowed:</p>
-
-          <ul>
-            <li>building - s: a specific building on a street or in an area</li>
-            <li>floor - s: a particular floor in a building</li>
-            <li>room - s: a particular room in a building</li>
-            <li>text - s: any more specific information, e.g.
-              "Northwest corner of the lobby"</li>
-            <li>description - s: A natural-language name for or description of
-              the location, e.g. "Bill's house"</li>
-            <li>uri - s: a URI representing the location or pointing to more
-              information about it</li>
-          </ul>
-
-          <p>Positions are represented by the following well-known keys:</p>
-
-          <ul>
-            <li>lat - d: latitude in decimal degrees north, -90 to +90,
-              relative to the WGS-84 datum
-              <tp:rationale>
-                This is from XEP-0080; the XEP allows use of a different
-                datum, but recommends this one. We enforce sanity by requiring
-                a consistent datum: a minimal compliant implementation of this
-                specification in terms of XEP-0080 would simply ignore the
-                &lt;lat&gt; and &lt;lon&gt; elements if &lt;datum&gt; exists
-                and has a value other than WGS-84, while an advanced
-                implementation might correct for the different datum.
-              </tp:rationale>
-            </li>
-            <li>lon - d: Longitude in decimal degrees east, -180 to +180,
-              relative to the WGS-84 datum
-              <tp:rationale>
-                Same rationale as 'lat'
-              </tp:rationale>
-            </li>
-            <li>alt - d: altitude in metres above sea level (negative
-              if below sea level)
-              <tp:rationale>
-                This is from XEP-0080
-              </tp:rationale>
-            </li>
-            <li>accuracy-level - i (<tp:type>Location_Accuracy_Level</tp:type>):
-              an indication of accuracy, which SHOULD be omitted if it would be
-              Location_Accuracy_Level_None or
-              Location_Accuracy_Level_Detailed
-              <tp:rationale>
-                This is a struct field in GeoClue; the name is new in this
-                specification, and was chosen in an attempt to avoid clashing
-                with any future XEP-0080 terminology.
-              </tp:rationale>
-            </li>
-            <li>error - d: horizontal position error in arc-minutes (1/60
-              degree) if known
-              <tp:rationale>
-                This is from XEP-0080
-              </tp:rationale>
-            </li>
-            <li>vertical-error-m - d: vertical position error in metres if
-              known
-              <tp:rationale>
-                This exists as a struct field in GeoClue; the name is new
-                in this specification.
-              </tp:rationale>
-            </li>
-            <li>horizontal-error-m - d: horizontal position error in metres if
-              known
-              <tp:rationale>
-                This exists as a struct field in GeoClue; the name is new
-                in this specification.
-              </tp:rationale>
-            </li>
-          </ul>
-
-          <p>Velocities are represented by the following well-known keys:</p>
-
-          <ul>
-            <li>speed - d: speed in metres per second
-              <tp:rationale>
-                This is from XEP-0080
-              </tp:rationale>
-            </li>
-            <li>bearing - d: direction of movement in decimal degrees,
-              where North is 0 and East is 90
-              <tp:rationale>
-                This is from XEP-0080, and is equivalent to the struct field
-                called "direction" in GeoClue
-              </tp:rationale>
-            </li>
-            <li>climb - d: rate of change of 'alt' in metres per second
-              <tp:rationale>
-                This is a struct field in GeoClue; the name is new to this
-                specification, but seems uncontroversial
-              </tp:rationale>
-            </li>
-          </ul>
-
-          <p>Other well-known keys:</p>
-
-          <ul>
-            <li>timestamp - t (<tp:type>Unix_Timestamp64</tp:type>): the time
-              that the contact was at this location, in seconds since
-              1970-01-01T00:00:00Z (i.e. the beginning of 1970 in UTC)
-              <tp:rationale>
-                XEP-0080 uses an ISO 8601 string for this, but a number of
-                seconds since the epoch is probably easier to work with.
-              </tp:rationale>
-            </li>
-          </ul>
-        </tp:docstring>
-      </tp:member>
-
-      <tp:member name="Value" type="v">
-        <tp:docstring>
-          The value corresponding to the well-known key.
-        </tp:docstring>
-      </tp:member>
-    </tp:mapping>
-
-    <tp:mapping name="Contact_Locations" type="a{ua{sv}}">
-      <tp:member name="Contact" type="u" tp:type="Contact_Handle">
-      </tp:member>
-      <tp:member name="Location" type="a{sv}" tp:type="Location">
-      </tp:member>
-    </tp:mapping>
-
-    <method name="GetLocations" tp:name-for-bindings="Get_Locations">
-      <tp:docstring>
-        Return the current locations of the given contacts, if they are
-        already known. If any of the given contacts' locations are not known,
-        request their current locations, and later emit
-        <tp:member-ref>LocationUpdated</tp:member-ref> for them; the
-        <tp:member-ref>LocationUpdated</tp:member-ref> signal for contacts
-        whose location could not be determined will have an empty Location.
-      </tp:docstring>
-
-      <arg direction="in" name="Contacts" type="au" tp:type="Contact_Handle[]">
-        <tp:docstring>
-          The contacts whose locations should be returned or signalled.
-        </tp:docstring>
-      </arg>
-
-      <arg direction="out" name="Locations" type="a{ua{sv}}"
-        tp:type="Contact_Locations">
-        <tp:docstring>
-          The contacts' locations, if already known. Contacts whose locations
-          are not already known are omitted from the mapping; contacts known
-          to have no location information appear in the mapping with an empty
-          Location dictionary.
-        </tp:docstring>
-      </arg>
-    </method>
-
-    <signal name="LocationUpdated" tp:name-for-bindings="Location_Updated">
-      <tp:docstring>
-        Emitted when a contact's location changes or becomes known.
-      </tp:docstring>
-
-      <arg name="Contact" type="u" tp:type="Contact_Handle">
-        <tp:docstring>
-          The contact
-        </tp:docstring>
-      </arg>
-      <arg name="Location" type="a{sv}" tp:type="Location">
-        <tp:docstring>
-          The contact's location, or empty to indicate that nothing is known
-          about the contact's location.
-        </tp:docstring>
-      </arg>
-    </signal>
-
-    <method name="SetLocation" tp:name-for-bindings="SetLocation">
-      <tp:docstring>
-        Set the local user's own location.
-      </tp:docstring>
-
-      <arg direction="in" name="Location" type="a{sv}">
-        <tp:docstring>
-          The location to advertise. If the user wants to obscure their
-          exact location by reducing the precision or accuracy, clients
-          MUST do this themselves, rather than relying on the connection
-          manager to do so. Clients that interact with more than one
-          connection SHOULD advertise the same reduced-accuracy location
-          to all of them, so that contacts cannot obtain an undesirably
-          accurate location by assuming that random errors have been added
-          and averaging the locations advertised on multiple connections.
-        </tp:docstring>
-      </arg>
-    </method>
-
-    <property name="LocationAccessControlTypes" type="au" access="read"
-      tp:type="Rich_Presence_Access_Control_Type[]" tp:name-for-bindings="Location_Access_Control_Types">
-      <tp:docstring>The types of access control that are supported by this
-        connection.</tp:docstring>
-    </property>
-
-    <property name="LocationAccessControl" type="(uv)" access="readwrite"
-      tp:type="Rich_Presence_Access_Control" tp:name-for-bindings="Location_Access_Control">
-      <tp:docstring>The current access control mechanism and settings
-        for this connection. Before publishing location for the first time,
-        if this has not been set by a client, implementations SHOULD
-        set it to be as restrictive as possible (an empty whitelist, if
-        supported).</tp:docstring>
-    </property>
-  </interface>
-</node>
-<!-- vim:set sw=2 sts=2 et ft=xml: -->
diff --git a/extensions/Makefile.am b/extensions/Makefile.am
index 0ed6fc52..93313621 100644
--- a/extensions/Makefile.am
+++ b/extensions/Makefile.am
@@ -15,7 +15,6 @@ EXTRA_DIST = \
     generic-types.xml \
     misc.xml \
     Channel_Handler.xml \
-    Connection_Interface_Location.xml \
     Tube_Handler.xml \
     Debug.xml
 
diff --git a/extensions/misc.xml b/extensions/misc.xml
index dd3125fb..746cd907 100644
--- a/extensions/misc.xml
+++ b/extensions/misc.xml
@@ -6,7 +6,6 @@
 
 <xi:include href="Channel_Handler.xml"/>
 <xi:include href="Tube_Handler.xml"/>
-<xi:include href="Connection_Interface_Location.xml"/>
 <xi:include href="Debug.xml" />
 
 </tp:spec>