/* SPDX-License-Identifier: GPL-2.0-only */ /* Copyright(c) 2020-2021 Intel Corporation. */ #ifndef __CXL_MEM_H__ #define __CXL_MEM_H__ #include #include #include "cxl.h" /* CXL 2.0 8.2.8.5.1.1 Memory Device Status Register */ #define CXLMDEV_STATUS_OFFSET 0x0 #define CXLMDEV_DEV_FATAL BIT(0) #define CXLMDEV_FW_HALT BIT(1) #define CXLMDEV_STATUS_MEDIA_STATUS_MASK GENMASK(3, 2) #define CXLMDEV_MS_NOT_READY 0 #define CXLMDEV_MS_READY 1 #define CXLMDEV_MS_ERROR 2 #define CXLMDEV_MS_DISABLED 3 #define CXLMDEV_READY(status) \ (FIELD_GET(CXLMDEV_STATUS_MEDIA_STATUS_MASK, status) == \ CXLMDEV_MS_READY) #define CXLMDEV_MBOX_IF_READY BIT(4) #define CXLMDEV_RESET_NEEDED_MASK GENMASK(7, 5) #define CXLMDEV_RESET_NEEDED_NOT 0 #define CXLMDEV_RESET_NEEDED_COLD 1 #define CXLMDEV_RESET_NEEDED_WARM 2 #define CXLMDEV_RESET_NEEDED_HOT 3 #define CXLMDEV_RESET_NEEDED_CXL 4 #define CXLMDEV_RESET_NEEDED(status) \ (FIELD_GET(CXLMDEV_RESET_NEEDED_MASK, status) != \ CXLMDEV_RESET_NEEDED_NOT) /** * struct cxl_memdev - CXL bus object representing a Type-3 Memory Device * @dev: driver core device object * @cdev: char dev core object for ioctl operations * @cxlds: The device state backing this device * @detach_work: active memdev lost a port in its ancestry * @id: id number of this memdev instance. */ struct cxl_memdev { struct device dev; struct cdev cdev; struct cxl_dev_state *cxlds; struct work_struct detach_work; int id; }; static inline struct cxl_memdev *to_cxl_memdev(struct device *dev) { return container_of(dev, struct cxl_memdev, dev); } bool is_cxl_memdev(struct device *dev); static inline bool is_cxl_endpoint(struct cxl_port *port) { return is_cxl_memdev(port->uport); } struct cxl_memdev *devm_cxl_add_memdev(struct cxl_dev_state *cxlds); /** * struct cxl_mbox_cmd - A command to be submitted to hardware. * @opcode: (input) The command set and command submitted to hardware. * @payload_in: (input) Pointer to the input payload. * @payload_out: (output) Pointer to the output payload. Must be allocated by * the caller. * @size_in: (input) Number of bytes to load from @payload_in. * @size_out: (input) Max number of bytes loaded into @payload_out. * (output) Number of bytes generated by the device. For fixed size * outputs commands this is always expected to be deterministic. For * variable sized output commands, it tells the exact number of bytes * written. * @return_code: (output) Error code returned from hardware. * * This is the primary mechanism used to send commands to the hardware. * All the fields except @payload_* correspond exactly to the fields described in * Command Register section of the CXL 2.0 8.2.8.4.5. @payload_in and * @payload_out are written to, and read from the Command Payload Registers * defined in CXL 2.0 8.2.8.4.8. */ struct cxl_mbox_cmd { u16 opcode; void *payload_in; void *payload_out; size_t size_in; size_t size_out; u16 return_code; }; /* * Per CXL 2.0 Section 8.2.8.4.5.1 */ #define CMD_CMD_RC_TABLE \ C(SUCCESS, 0, NULL), \ C(BACKGROUND, -ENXIO, "background cmd started successfully"), \ C(INPUT, -ENXIO, "cmd input was invalid"), \ C(UNSUPPORTED, -ENXIO, "cmd is not supported"), \ C(INTERNAL, -ENXIO, "internal device error"), \ C(RETRY, -ENXIO, "temporary error, retry once"), \ C(BUSY, -ENXIO, "ongoing background operation"), \ C(MEDIADISABLED, -ENXIO, "media access is disabled"), \ C(FWINPROGRESS, -ENXIO, "one FW package can be transferred at a time"), \ C(FWOOO, -ENXIO, "FW package content was transferred out of order"), \ C(FWAUTH, -ENXIO, "FW package authentication failed"), \ C(FWSLOT, -ENXIO, "FW slot is not supported for requested operation"), \ C(FWROLLBACK, -ENXIO, "rolled back to the previous active FW"), \ C(FWRESET, -ENXIO, "FW failed to activate, needs cold reset"), \ C(HANDLE, -ENXIO, "one or more Event Record Handles were invalid"), \ C(PADDR, -ENXIO, "physical address specified is invalid"), \ C(POISONLMT, -ENXIO, "poison injection limit has been reached"), \ C(MEDIAFAILURE, -ENXIO, "permanent issue with the media"), \ C(ABORT, -ENXIO, "background cmd was aborted by device"), \ C(SECURITY, -ENXIO, "not valid in the current security state"), \ C(PASSPHRASE, -ENXIO, "phrase doesn't match current set passphrase"), \ C(MBUNSUPPORTED, -ENXIO, "unsupported on the mailbox it was issued on"),\ C(PAYLOADLEN, -ENXIO, "invalid payload length") #undef C #define C(a, b, c) CXL_MBOX_CMD_RC_##a enum { CMD_CMD_RC_TABLE }; #undef C #define C(a, b, c) { b, c } struct cxl_mbox_cmd_rc { int err; const char *desc; }; static const struct cxl_mbox_cmd_rc cxl_mbox_cmd_rctable[] ={ CMD_CMD_RC_TABLE }; #undef C static inline const char *cxl_mbox_cmd_rc2str(struct cxl_mbox_cmd *mbox_cmd) { return cxl_mbox_cmd_rctable[mbox_cmd->return_code].desc; } static inline int cxl_mbox_cmd_rc2errno(struct cxl_mbox_cmd *mbox_cmd) { return cxl_mbox_cmd_rctable[mbox_cmd->return_code].err; } /* * CXL 2.0 - Memory capacity multiplier * See Section 8.2.9.5 * * Volatile, Persistent, and Partition capacities are specified to be in * multiples of 256MB - define a multiplier to convert to/from bytes. */ #define CXL_CAPACITY_MULTIPLIER SZ_256M /** * struct cxl_endpoint_dvsec_info - Cached DVSEC info * @mem_enabled: cached value of mem_enabled in the DVSEC, PCIE_DEVICE * @ranges: Number of active HDM ranges this device uses. * @dvsec_range: cached attributes of the ranges in the DVSEC, PCIE_DEVICE */ struct cxl_endpoint_dvsec_info { bool mem_enabled; int ranges; struct range dvsec_range[2]; }; /** * struct cxl_dev_state - The driver device state * * cxl_dev_state represents the CXL driver/device state. It provides an * interface to mailbox commands as well as some cached data about the device. * Currently only memory devices are represented. * * @dev: The device associated with this CXL state * @regs: Parsed register blocks * @cxl_dvsec: Offset to the PCIe device DVSEC * @payload_size: Size of space for payload * (CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register) * @lsa_size: Size of Label Storage Area * (CXL 2.0 8.2.9.5.1.1 Identify Memory Device) * @mbox_mutex: Mutex to synchronize mailbox access. * @firmware_version: Firmware version for the memory device. * @enabled_cmds: Hardware commands found enabled in CEL. * @exclusive_cmds: Commands that are kernel-internal only * @pmem_range: Active Persistent memory capacity configuration * @ram_range: Active Volatile memory capacity configuration * @total_bytes: sum of all possible capacities * @volatile_only_bytes: hard volatile capacity * @persistent_only_bytes: hard persistent capacity * @partition_align_bytes: alignment size for partition-able capacity * @active_volatile_bytes: sum of hard + soft volatile * @active_persistent_bytes: sum of hard + soft persistent * @next_volatile_bytes: volatile capacity change pending device reset * @next_persistent_bytes: persistent capacity change pending device reset * @component_reg_phys: register base of component registers * @info: Cached DVSEC information about the device. * @serial: PCIe Device Serial Number * @mbox_send: @dev specific transport for transmitting mailbox commands * * See section 8.2.9.5.2 Capacity Configuration and Label Storage for * details on capacity parameters. */ struct cxl_dev_state { struct device *dev; struct cxl_regs regs; int cxl_dvsec; size_t payload_size; size_t lsa_size; struct mutex mbox_mutex; /* Protects device mailbox and firmware */ char firmware_version[0x10]; DECLARE_BITMAP(enabled_cmds, CXL_MEM_COMMAND_ID_MAX); DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX); struct range pmem_range; struct range ram_range; u64 total_bytes; u64 volatile_only_bytes; u64 persistent_only_bytes; u64 partition_align_bytes; u64 active_volatile_bytes; u64 active_persistent_bytes; u64 next_volatile_bytes; u64 next_persistent_bytes; resource_size_t component_reg_phys; struct cxl_endpoint_dvsec_info info; u64 serial; int (*mbox_send)(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd); }; enum cxl_opcode { CXL_MBOX_OP_INVALID = 0x0000, CXL_MBOX_OP_RAW = CXL_MBOX_OP_INVALID, CXL_MBOX_OP_GET_FW_INFO = 0x0200, CXL_MBOX_OP_ACTIVATE_FW = 0x0202, CXL_MBOX_OP_GET_SUPPORTED_LOGS = 0x0400, CXL_MBOX_OP_GET_LOG = 0x0401, CXL_MBOX_OP_IDENTIFY = 0x4000, CXL_MBOX_OP_GET_PARTITION_INFO = 0x4100, CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101, CXL_MBOX_OP_GET_LSA = 0x4102, CXL_MBOX_OP_SET_LSA = 0x4103, CXL_MBOX_OP_GET_HEALTH_INFO = 0x4200, CXL_MBOX_OP_GET_ALERT_CONFIG = 0x4201, CXL_MBOX_OP_SET_ALERT_CONFIG = 0x4202, CXL_MBOX_OP_GET_SHUTDOWN_STATE = 0x4203, CXL_MBOX_OP_SET_SHUTDOWN_STATE = 0x4204, CXL_MBOX_OP_GET_POISON = 0x4300, CXL_MBOX_OP_INJECT_POISON = 0x4301, CXL_MBOX_OP_CLEAR_POISON = 0x4302, CXL_MBOX_OP_GET_SCAN_MEDIA_CAPS = 0x4303, CXL_MBOX_OP_SCAN_MEDIA = 0x4304, CXL_MBOX_OP_GET_SCAN_MEDIA = 0x4305, CXL_MBOX_OP_MAX = 0x10000 }; #define DEFINE_CXL_CEL_UUID \ UUID_INIT(0xda9c0b5, 0xbf41, 0x4b78, 0x8f, 0x79, 0x96, 0xb1, 0x62, \ 0x3b, 0x3f, 0x17) #define DEFINE_CXL_VENDOR_DEBUG_UUID \ UUID_INIT(0xe1819d9, 0x11a9, 0x400c, 0x81, 0x1f, 0xd6, 0x07, 0x19, \ 0x40, 0x3d, 0x86) struct cxl_mbox_get_supported_logs { __le16 entries; u8 rsvd[6]; struct cxl_gsl_entry { uuid_t uuid; __le32 size; } __packed entry[]; } __packed; struct cxl_cel_entry { __le16 opcode; __le16 effect; } __packed; struct cxl_mbox_get_log { uuid_t uuid; __le32 offset; __le32 length; } __packed; /* See CXL 2.0 Table 175 Identify Memory Device Output Payload */ struct cxl_mbox_identify { char fw_revision[0x10]; __le64 total_capacity; __le64 volatile_capacity; __le64 persistent_capacity; __le64 partition_align; __le16 info_event_log_size; __le16 warning_event_log_size; __le16 failure_event_log_size; __le16 fatal_event_log_size; __le32 lsa_size; u8 poison_list_max_mer[3]; __le16 inject_poison_limit; u8 poison_caps; u8 qos_telemetry_caps; } __packed; struct cxl_mbox_get_lsa { u32 offset; u32 length; } __packed; struct cxl_mbox_set_lsa { u32 offset; u32 reserved; u8 data[]; } __packed; struct cxl_mbox_set_partition_info { __le64 volatile_capacity; u8 flags; } __packed; #define CXL_SET_PARTITION_IMMEDIATE_FLAG BIT(0) /** * struct cxl_mem_command - Driver representation of a memory device command * @info: Command information as it exists for the UAPI * @opcode: The actual bits used for the mailbox protocol * @flags: Set of flags effecting driver behavior. * * * %CXL_CMD_FLAG_FORCE_ENABLE: In cases of error, commands with this flag * will be enabled by the driver regardless of what hardware may have * advertised. * * The cxl_mem_command is the driver's internal representation of commands that * are supported by the driver. Some of these commands may not be supported by * the hardware. The driver will use @info to validate the fields passed in by * the user then submit the @opcode to the hardware. * * See struct cxl_command_info. */ struct cxl_mem_command { struct cxl_command_info info; enum cxl_opcode opcode; u32 flags; #define CXL_CMD_FLAG_NONE 0 #define CXL_CMD_FLAG_FORCE_ENABLE BIT(0) }; int cxl_mbox_send_cmd(struct cxl_dev_state *cxlds, u16 opcode, void *in, size_t in_size, void *out, size_t out_size); int cxl_dev_state_identify(struct cxl_dev_state *cxlds); int cxl_await_media_ready(struct cxl_dev_state *cxlds); int cxl_enumerate_cmds(struct cxl_dev_state *cxlds); int cxl_mem_create_range_info(struct cxl_dev_state *cxlds); struct cxl_dev_state *cxl_dev_state_create(struct device *dev); void set_exclusive_cxl_commands(struct cxl_dev_state *cxlds, unsigned long *cmds); void clear_exclusive_cxl_commands(struct cxl_dev_state *cxlds, unsigned long *cmds); #ifdef CONFIG_CXL_SUSPEND void cxl_mem_active_inc(void); void cxl_mem_active_dec(void); #else static inline void cxl_mem_active_inc(void) { } static inline void cxl_mem_active_dec(void) { } #endif struct cxl_hdm { struct cxl_component_regs regs; unsigned int decoder_count; unsigned int target_count; unsigned int interleave_mask; struct cxl_port *port; }; #endif /* __CXL_MEM_H__ */