// SPDX-License-Identifier: GPL-2.0-only /* * sleep.c - ACPI sleep support. * * Copyright (c) 2005 Alexey Starikovskiy * Copyright (c) 2004 David Shaohua Li * Copyright (c) 2000-2003 Patrick Mochel * Copyright (c) 2003 Open Source Development Lab */ #define pr_fmt(fmt) "ACPI: PM: " fmt #include #include #include #include #include #include #include #include #include #include #include #include #include "internal.h" #include "sleep.h" /* * Some HW-full platforms do not have _S5, so they may need * to leverage efi power off for a shutdown. */ bool acpi_no_s5; static u8 sleep_states[ACPI_S_STATE_COUNT]; static void acpi_sleep_tts_switch(u32 acpi_state) { acpi_status status; status = acpi_execute_simple_method(NULL, "\\_TTS", acpi_state); if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { /* * OS can't evaluate the _TTS object correctly. Some warning * message will be printed. But it won't break anything. */ pr_notice("Failure in evaluating _TTS object\n"); } } static int tts_notify_reboot(struct notifier_block *this, unsigned long code, void *x) { acpi_sleep_tts_switch(ACPI_STATE_S5); return NOTIFY_DONE; } static struct notifier_block tts_notifier = { .notifier_call = tts_notify_reboot, .next = NULL, .priority = 0, }; #ifndef acpi_skip_set_wakeup_address #define acpi_skip_set_wakeup_address() false #endif static int acpi_sleep_prepare(u32 acpi_state) { #ifdef CONFIG_ACPI_SLEEP unsigned long acpi_wakeup_address; /* do we have a wakeup address for S2 and S3? */ if (acpi_state == ACPI_STATE_S3 && !acpi_skip_set_wakeup_address()) { acpi_wakeup_address = acpi_get_wakeup_address(); if (!acpi_wakeup_address) return -EFAULT; acpi_set_waking_vector(acpi_wakeup_address); } #endif pr_info("Preparing to enter system sleep state S%d\n", acpi_state); acpi_enable_wakeup_devices(acpi_state); acpi_enter_sleep_state_prep(acpi_state); return 0; } static u8 max_sleep_state = -1; bool acpi_sleep_state_supported(u8 sleep_state) { acpi_status status; u8 type_a, type_b; if (sleep_state > max_sleep_state) return false; status = acpi_get_sleep_type_data(sleep_state, &type_a, &type_b); return ACPI_SUCCESS(status) && (!acpi_gbl_reduced_hardware || (acpi_gbl_FADT.sleep_control.address && acpi_gbl_FADT.sleep_status.address)); } #ifdef CONFIG_ACPI_SLEEP static u32 acpi_target_sleep_state = ACPI_STATE_S0; u32 acpi_target_system_state(void) { return acpi_target_sleep_state; } EXPORT_SYMBOL_GPL(acpi_target_system_state); static bool pwr_btn_event_pending; /* * The ACPI specification wants us to save NVS memory regions during hibernation * and to restore them during the subsequent resume. Windows does that also for * suspend to RAM. However, it is known that this mechanism does not work on * all machines, so we allow the user to disable it with the help of the * 'acpi_sleep=nonvs' kernel command line option. */ static bool nvs_nosave; void __init acpi_nvs_nosave(void) { nvs_nosave = true; } /* * The ACPI specification wants us to save NVS memory regions during hibernation * but says nothing about saving NVS during S3. Not all versions of Windows * save NVS on S3 suspend either, and it is clear that not all systems need * NVS to be saved at S3 time. To improve suspend/resume time, allow the * user to disable saving NVS on S3 if their system does not require it, but * continue to save/restore NVS for S4 as specified. */ static bool nvs_nosave_s3; void __init acpi_nvs_nosave_s3(void) { nvs_nosave_s3 = true; } static int __init init_nvs_save_s3(const struct dmi_system_id *d) { nvs_nosave_s3 = false; return 0; } /* * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the * user to request that behavior by using the 'acpi_old_suspend_ordering' * kernel command line option that causes the following variable to be set. */ static bool old_suspend_ordering; void __init acpi_old_suspend_ordering(void) { old_suspend_ordering = true; } static int __init init_old_suspend_ordering(const struct dmi_system_id *d) { acpi_old_suspend_ordering(); return 0; } static int __init init_nvs_nosave(const struct dmi_system_id *d) { acpi_nvs_nosave(); return 0; } static int __init init_nosleep(const struct dmi_system_id *d) { pr_info("Disabling ACPI suspend\n"); max_sleep_state = 0; return 0; } bool acpi_sleep_default_s3; static int __init init_default_s3(const struct dmi_system_id *d) { acpi_sleep_default_s3 = true; return 0; } static const struct dmi_system_id acpisleep_dmi_table[] __initconst = { { .callback = init_old_suspend_ordering, .ident = "Abit KN9 (nForce4 variant)", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"), DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"), }, }, { .callback = init_old_suspend_ordering, .ident = "HP xw4600 Workstation", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"), }, }, { .callback = init_old_suspend_ordering, .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."), DMI_MATCH(DMI_BOARD_NAME, "M2N8L"), }, }, { .callback = init_old_suspend_ordering, .ident = "Panasonic CF51-2L", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Matsushita Electric Industrial Co.,Ltd."), DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"), }, }, { .callback = init_nvs_nosave, .ident = "Sony Vaio VGN-FW41E_H", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"), }, }, { .callback = init_nvs_nosave, .ident = "Sony Vaio VGN-FW21E", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"), }, }, { .callback = init_nvs_nosave, .ident = "Sony Vaio VGN-FW21M", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"), }, }, { .callback = init_nvs_nosave, .ident = "Sony Vaio VPCEB17FX", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"), }, }, { .callback = init_nvs_nosave, .ident = "Sony Vaio VGN-SR11M", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"), }, }, { .callback = init_nvs_nosave, .ident = "Everex StepNote Series", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"), }, }, { .callback = init_nvs_nosave, .ident = "Sony Vaio VPCEB1Z1E", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"), }, }, { .callback = init_nvs_nosave, .ident = "Sony Vaio VGN-NW130D", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"), }, }, { .callback = init_nvs_nosave, .ident = "Sony Vaio VPCCW29FX", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"), }, }, { .callback = init_nvs_nosave, .ident = "Averatec AV1020-ED2", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"), DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"), }, }, { .callback = init_old_suspend_ordering, .ident = "Asus A8N-SLI DELUXE", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"), }, }, { .callback = init_old_suspend_ordering, .ident = "Asus A8N-SLI Premium", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"), }, }, { .callback = init_nvs_nosave, .ident = "Sony Vaio VGN-SR26GN_P", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"), }, }, { .callback = init_nvs_nosave, .ident = "Sony Vaio VPCEB1S1E", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"), }, }, { .callback = init_nvs_nosave, .ident = "Sony Vaio VGN-FW520F", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"), }, }, { .callback = init_nvs_nosave, .ident = "Asus K54C", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "K54C"), }, }, { .callback = init_nvs_nosave, .ident = "Asus K54HR", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"), }, }, { .callback = init_nvs_save_s3, .ident = "Asus 1025C", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), DMI_MATCH(DMI_PRODUCT_NAME, "1025C"), }, }, /* * https://bugzilla.kernel.org/show_bug.cgi?id=189431 * Lenovo G50-45 is a platform later than 2012, but needs nvs memory * saving during S3. */ { .callback = init_nvs_save_s3, .ident = "Lenovo G50-45", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), DMI_MATCH(DMI_PRODUCT_NAME, "80E3"), }, }, { .callback = init_nvs_save_s3, .ident = "Lenovo G40-45", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), DMI_MATCH(DMI_PRODUCT_NAME, "80E1"), }, }, /* * ThinkPad X1 Tablet(2016) cannot do suspend-to-idle using * the Low Power S0 Idle firmware interface (see * https://bugzilla.kernel.org/show_bug.cgi?id=199057). */ { .callback = init_default_s3, .ident = "ThinkPad X1 Tablet(2016)", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), DMI_MATCH(DMI_PRODUCT_NAME, "20GGA00L00"), }, }, /* * ASUS B1400CEAE hangs on resume from suspend (see * https://bugzilla.kernel.org/show_bug.cgi?id=215742). */ { .callback = init_default_s3, .ident = "ASUS B1400CEAE", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), DMI_MATCH(DMI_PRODUCT_NAME, "ASUS EXPERTBOOK B1400CEAE"), }, }, { .callback = init_nosleep, .ident = "samus", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), DMI_MATCH(DMI_PRODUCT_NAME, "Samus"), }, }, {}, }; static bool ignore_blacklist; void __init acpi_sleep_no_blacklist(void) { ignore_blacklist = true; } static void __init acpi_sleep_dmi_check(void) { if (ignore_blacklist) return; if (dmi_get_bios_year() >= 2012) acpi_nvs_nosave_s3(); dmi_check_system(acpisleep_dmi_table); } /** * acpi_pm_freeze - Disable the GPEs and suspend EC transactions. */ static int acpi_pm_freeze(void) { acpi_disable_all_gpes(); acpi_os_wait_events_complete(); acpi_ec_block_transactions(); return 0; } /** * acpi_pm_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS. */ static int acpi_pm_pre_suspend(void) { acpi_pm_freeze(); return suspend_nvs_save(); } /** * __acpi_pm_prepare - Prepare the platform to enter the target state. * * If necessary, set the firmware waking vector and do arch-specific * nastiness to get the wakeup code to the waking vector. */ static int __acpi_pm_prepare(void) { int error = acpi_sleep_prepare(acpi_target_sleep_state); if (error) acpi_target_sleep_state = ACPI_STATE_S0; return error; } /** * acpi_pm_prepare - Prepare the platform to enter the target sleep * state and disable the GPEs. */ static int acpi_pm_prepare(void) { int error = __acpi_pm_prepare(); if (!error) error = acpi_pm_pre_suspend(); return error; } /** * acpi_pm_finish - Instruct the platform to leave a sleep state. * * This is called after we wake back up (or if entering the sleep state * failed). */ static void acpi_pm_finish(void) { struct acpi_device *pwr_btn_adev; u32 acpi_state = acpi_target_sleep_state; acpi_ec_unblock_transactions(); suspend_nvs_free(); if (acpi_state == ACPI_STATE_S0) return; pr_info("Waking up from system sleep state S%d\n", acpi_state); acpi_disable_wakeup_devices(acpi_state); acpi_leave_sleep_state(acpi_state); /* reset firmware waking vector */ acpi_set_waking_vector(0); acpi_target_sleep_state = ACPI_STATE_S0; acpi_resume_power_resources(); /* If we were woken with the fixed power button, provide a small * hint to userspace in the form of a wakeup event on the fixed power * button device (if it can be found). * * We delay the event generation til now, as the PM layer requires * timekeeping to be running before we generate events. */ if (!pwr_btn_event_pending) return; pwr_btn_event_pending = false; pwr_btn_adev = acpi_dev_get_first_match_dev(ACPI_BUTTON_HID_POWERF, NULL, -1); if (pwr_btn_adev) { pm_wakeup_event(&pwr_btn_adev->dev, 0); acpi_dev_put(pwr_btn_adev); } } /** * acpi_pm_start - Start system PM transition. */ static void acpi_pm_start(u32 acpi_state) { acpi_target_sleep_state = acpi_state; acpi_sleep_tts_switch(acpi_target_sleep_state); acpi_scan_lock_acquire(); } /** * acpi_pm_end - Finish up system PM transition. */ static void acpi_pm_end(void) { acpi_turn_off_unused_power_resources(); acpi_scan_lock_release(); /* * This is necessary in case acpi_pm_finish() is not called during a * failing transition to a sleep state. */ acpi_target_sleep_state = ACPI_STATE_S0; acpi_sleep_tts_switch(acpi_target_sleep_state); } #else /* !CONFIG_ACPI_SLEEP */ #define sleep_no_lps0 (1) #define acpi_target_sleep_state ACPI_STATE_S0 #define acpi_sleep_default_s3 (1) static inline void acpi_sleep_dmi_check(void) {} #endif /* CONFIG_ACPI_SLEEP */ #ifdef CONFIG_SUSPEND static u32 acpi_suspend_states[] = { [PM_SUSPEND_ON] = ACPI_STATE_S0, [PM_SUSPEND_STANDBY] = ACPI_STATE_S1, [PM_SUSPEND_MEM] = ACPI_STATE_S3, [PM_SUSPEND_MAX] = ACPI_STATE_S5 }; /** * acpi_suspend_begin - Set the target system sleep state to the state * associated with given @pm_state, if supported. */ static int acpi_suspend_begin(suspend_state_t pm_state) { u32 acpi_state = acpi_suspend_states[pm_state]; int error; error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc(); if (error) return error; if (!sleep_states[acpi_state]) { pr_err("ACPI does not support sleep state S%u\n", acpi_state); return -ENOSYS; } if (acpi_state > ACPI_STATE_S1) pm_set_suspend_via_firmware(); acpi_pm_start(acpi_state); return 0; } /** * acpi_suspend_enter - Actually enter a sleep state. * @pm_state: ignored * * Flush caches and go to sleep. For STR we have to call arch-specific * assembly, which in turn call acpi_enter_sleep_state(). * It's unfortunate, but it works. Please fix if you're feeling frisky. */ static int acpi_suspend_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; u32 acpi_state = acpi_target_sleep_state; int error; trace_suspend_resume(TPS("acpi_suspend"), acpi_state, true); switch (acpi_state) { case ACPI_STATE_S1: barrier(); status = acpi_enter_sleep_state(acpi_state); break; case ACPI_STATE_S3: if (!acpi_suspend_lowlevel) return -ENOSYS; error = acpi_suspend_lowlevel(); if (error) return error; pr_info("Low-level resume complete\n"); pm_set_resume_via_firmware(); break; } trace_suspend_resume(TPS("acpi_suspend"), acpi_state, false); /* This violates the spec but is required for bug compatibility. */ acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); /* Reprogram control registers */ acpi_leave_sleep_state_prep(acpi_state); /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the * POWER_BUTTON event should not reach userspace ] * * However, we do generate a small hint for userspace in the form of * a wakeup event. We flag this condition for now and generate the * event later, as we're currently too early in resume to be able to * generate wakeup events. */ if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) { acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED; acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status); if (pwr_btn_status & ACPI_EVENT_FLAG_STATUS_SET) { acpi_clear_event(ACPI_EVENT_POWER_BUTTON); /* Flag for later */ pwr_btn_event_pending = true; } } /* * Disable all GPE and clear their status bits before interrupts are * enabled. Some GPEs (like wakeup GPEs) have no handlers and this can * prevent them from producing spurious interrups. * * acpi_leave_sleep_state() will reenable specific GPEs later. * * Because this code runs on one CPU with disabled interrupts (all of * the other CPUs are offline at this time), it need not acquire any * sleeping locks which may trigger an implicit preemption point even * if there is no contention, so avoid doing that by using a low-level * library routine here. */ acpi_hw_disable_all_gpes(); /* Allow EC transactions to happen. */ acpi_ec_unblock_transactions(); suspend_nvs_restore(); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } static int acpi_suspend_state_valid(suspend_state_t pm_state) { u32 acpi_state; switch (pm_state) { case PM_SUSPEND_ON: case PM_SUSPEND_STANDBY: case PM_SUSPEND_MEM: acpi_state = acpi_suspend_states[pm_state]; return sleep_states[acpi_state]; default: return 0; } } static const struct platform_suspend_ops acpi_suspend_ops = { .valid = acpi_suspend_state_valid, .begin = acpi_suspend_begin, .prepare_late = acpi_pm_prepare, .enter = acpi_suspend_enter, .wake = acpi_pm_finish, .end = acpi_pm_end, }; /** * acpi_suspend_begin_old - Set the target system sleep state to the * state associated with given @pm_state, if supported, and * execute the _PTS control method. This function is used if the * pre-ACPI 2.0 suspend ordering has been requested. */ static int acpi_suspend_begin_old(suspend_state_t pm_state) { int error = acpi_suspend_begin(pm_state); if (!error) error = __acpi_pm_prepare(); return error; } /* * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has * been requested. */ static const struct platform_suspend_ops acpi_suspend_ops_old = { .valid = acpi_suspend_state_valid, .begin = acpi_suspend_begin_old, .prepare_late = acpi_pm_pre_suspend, .enter = acpi_suspend_enter, .wake = acpi_pm_finish, .end = acpi_pm_end, .recover = acpi_pm_finish, }; static bool s2idle_wakeup; int acpi_s2idle_begin(void) { acpi_scan_lock_acquire(); return 0; } int acpi_s2idle_prepare(void) { if (acpi_sci_irq_valid()) { int error; error = enable_irq_wake(acpi_sci_irq); if (error) pr_warn("Warning: Failed to enable wakeup from IRQ %d: %d\n", acpi_sci_irq, error); acpi_ec_set_gpe_wake_mask(ACPI_GPE_ENABLE); } acpi_enable_wakeup_devices(ACPI_STATE_S0); /* Change the configuration of GPEs to avoid spurious wakeup. */ acpi_enable_all_wakeup_gpes(); acpi_os_wait_events_complete(); s2idle_wakeup = true; return 0; } bool acpi_s2idle_wake(void) { if (!acpi_sci_irq_valid()) return pm_wakeup_pending(); while (pm_wakeup_pending()) { /* * If IRQD_WAKEUP_ARMED is set for the SCI at this point, the * SCI has not triggered while suspended, so bail out (the * wakeup is pending anyway and the SCI is not the source of * it). */ if (irqd_is_wakeup_armed(irq_get_irq_data(acpi_sci_irq))) { pm_pr_dbg("Wakeup unrelated to ACPI SCI\n"); return true; } /* * If the status bit of any enabled fixed event is set, the * wakeup is regarded as valid. */ if (acpi_any_fixed_event_status_set()) { pm_pr_dbg("ACPI fixed event wakeup\n"); return true; } /* Check wakeups from drivers sharing the SCI. */ if (acpi_check_wakeup_handlers()) { pm_pr_dbg("ACPI custom handler wakeup\n"); return true; } /* * Check non-EC GPE wakeups and if there are none, cancel the * SCI-related wakeup and dispatch the EC GPE. */ if (acpi_ec_dispatch_gpe()) { pm_pr_dbg("ACPI non-EC GPE wakeup\n"); return true; } acpi_os_wait_events_complete(); /* * The SCI is in the "suspended" state now and it cannot produce * new wakeup events till the rearming below, so if any of them * are pending here, they must be resulting from the processing * of EC events above or coming from somewhere else. */ if (pm_wakeup_pending()) { pm_pr_dbg("Wakeup after ACPI Notify sync\n"); return true; } pm_pr_dbg("Rearming ACPI SCI for wakeup\n"); pm_wakeup_clear(acpi_sci_irq); rearm_wake_irq(acpi_sci_irq); } return false; } void acpi_s2idle_restore(void) { /* * Drain pending events before restoring the working-state configuration * of GPEs. */ acpi_os_wait_events_complete(); /* synchronize GPE processing */ acpi_ec_flush_work(); /* flush the EC driver's workqueues */ acpi_os_wait_events_complete(); /* synchronize Notify handling */ s2idle_wakeup = false; acpi_enable_all_runtime_gpes(); acpi_disable_wakeup_devices(ACPI_STATE_S0); if (acpi_sci_irq_valid()) { acpi_ec_set_gpe_wake_mask(ACPI_GPE_DISABLE); disable_irq_wake(acpi_sci_irq); } } void acpi_s2idle_end(void) { acpi_scan_lock_release(); } static const struct platform_s2idle_ops acpi_s2idle_ops = { .begin = acpi_s2idle_begin, .prepare = acpi_s2idle_prepare, .wake = acpi_s2idle_wake, .restore = acpi_s2idle_restore, .end = acpi_s2idle_end, }; void __weak acpi_s2idle_setup(void) { if (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0) pr_info("Efficient low-power S0 idle declared\n"); s2idle_set_ops(&acpi_s2idle_ops); } static void __init acpi_sleep_suspend_setup(void) { bool suspend_ops_needed = false; int i; for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) if (acpi_sleep_state_supported(i)) { sleep_states[i] = 1; suspend_ops_needed = true; } if (suspend_ops_needed) suspend_set_ops(old_suspend_ordering ? &acpi_suspend_ops_old : &acpi_suspend_ops); acpi_s2idle_setup(); } #else /* !CONFIG_SUSPEND */ #define s2idle_wakeup (false) static inline void acpi_sleep_suspend_setup(void) {} #endif /* !CONFIG_SUSPEND */ bool acpi_s2idle_wakeup(void) { return s2idle_wakeup; } #ifdef CONFIG_PM_SLEEP static u32 saved_bm_rld; static int acpi_save_bm_rld(void) { acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); return 0; } static void acpi_restore_bm_rld(void) { u32 resumed_bm_rld = 0; acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); if (resumed_bm_rld == saved_bm_rld) return; acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); } static struct syscore_ops acpi_sleep_syscore_ops = { .suspend = acpi_save_bm_rld, .resume = acpi_restore_bm_rld, }; static void acpi_sleep_syscore_init(void) { register_syscore_ops(&acpi_sleep_syscore_ops); } #else static inline void acpi_sleep_syscore_init(void) {} #endif /* CONFIG_PM_SLEEP */ #ifdef CONFIG_HIBERNATION static unsigned long s4_hardware_signature; static struct acpi_table_facs *facs; int acpi_check_s4_hw_signature = -1; /* Default behaviour is just to warn */ static int acpi_hibernation_begin(pm_message_t stage) { if (!nvs_nosave) { int error = suspend_nvs_alloc(); if (error) return error; } if (stage.event == PM_EVENT_HIBERNATE) pm_set_suspend_via_firmware(); acpi_pm_start(ACPI_STATE_S4); return 0; } static int acpi_hibernation_enter(void) { acpi_status status = AE_OK; /* This shouldn't return. If it returns, we have a problem */ status = acpi_enter_sleep_state(ACPI_STATE_S4); /* Reprogram control registers */ acpi_leave_sleep_state_prep(ACPI_STATE_S4); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } static void acpi_hibernation_leave(void) { pm_set_resume_via_firmware(); /* * If ACPI is not enabled by the BIOS and the boot kernel, we need to * enable it here. */ acpi_enable(); /* Reprogram control registers */ acpi_leave_sleep_state_prep(ACPI_STATE_S4); /* Check the hardware signature */ if (facs && s4_hardware_signature != facs->hardware_signature) pr_crit("Hardware changed while hibernated, success doubtful!\n"); /* Restore the NVS memory area */ suspend_nvs_restore(); /* Allow EC transactions to happen. */ acpi_ec_unblock_transactions(); } static void acpi_pm_thaw(void) { acpi_ec_unblock_transactions(); acpi_enable_all_runtime_gpes(); } static const struct platform_hibernation_ops acpi_hibernation_ops = { .begin = acpi_hibernation_begin, .end = acpi_pm_end, .pre_snapshot = acpi_pm_prepare, .finish = acpi_pm_finish, .prepare = acpi_pm_prepare, .enter = acpi_hibernation_enter, .leave = acpi_hibernation_leave, .pre_restore = acpi_pm_freeze, .restore_cleanup = acpi_pm_thaw, }; /** * acpi_hibernation_begin_old - Set the target system sleep state to * ACPI_STATE_S4 and execute the _PTS control method. This * function is used if the pre-ACPI 2.0 suspend ordering has been * requested. */ static int acpi_hibernation_begin_old(pm_message_t stage) { int error; /* * The _TTS object should always be evaluated before the _PTS object. * When the old_suspended_ordering is true, the _PTS object is * evaluated in the acpi_sleep_prepare. */ acpi_sleep_tts_switch(ACPI_STATE_S4); error = acpi_sleep_prepare(ACPI_STATE_S4); if (error) return error; if (!nvs_nosave) { error = suspend_nvs_alloc(); if (error) return error; } if (stage.event == PM_EVENT_HIBERNATE) pm_set_suspend_via_firmware(); acpi_target_sleep_state = ACPI_STATE_S4; acpi_scan_lock_acquire(); return 0; } /* * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has * been requested. */ static const struct platform_hibernation_ops acpi_hibernation_ops_old = { .begin = acpi_hibernation_begin_old, .end = acpi_pm_end, .pre_snapshot = acpi_pm_pre_suspend, .prepare = acpi_pm_freeze, .finish = acpi_pm_finish, .enter = acpi_hibernation_enter, .leave = acpi_hibernation_leave, .pre_restore = acpi_pm_freeze, .restore_cleanup = acpi_pm_thaw, .recover = acpi_pm_finish, }; static void acpi_sleep_hibernate_setup(void) { if (!acpi_sleep_state_supported(ACPI_STATE_S4)) return; hibernation_set_ops(old_suspend_ordering ? &acpi_hibernation_ops_old : &acpi_hibernation_ops); sleep_states[ACPI_STATE_S4] = 1; if (!acpi_check_s4_hw_signature) return; acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs); if (facs) { /* * s4_hardware_signature is the local variable which is just * used to warn about mismatch after we're attempting to * resume (in violation of the ACPI specification.) */ s4_hardware_signature = facs->hardware_signature; if (acpi_check_s4_hw_signature > 0) { /* * If we're actually obeying the ACPI specification * then the signature is written out as part of the * swsusp header, in order to allow the boot kernel * to gracefully decline to resume. */ swsusp_hardware_signature = facs->hardware_signature; } } } #else /* !CONFIG_HIBERNATION */ static inline void acpi_sleep_hibernate_setup(void) {} #endif /* !CONFIG_HIBERNATION */ static int acpi_power_off_prepare(struct sys_off_data *data) { /* Prepare to power off the system */ acpi_sleep_prepare(ACPI_STATE_S5); acpi_disable_all_gpes(); acpi_os_wait_events_complete(); return NOTIFY_DONE; } static int acpi_power_off(struct sys_off_data *data) { /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ pr_debug("%s called\n", __func__); local_irq_disable(); acpi_enter_sleep_state(ACPI_STATE_S5); return NOTIFY_DONE; } int __init acpi_sleep_init(void) { char supported[ACPI_S_STATE_COUNT * 3 + 1]; char *pos = supported; int i; acpi_sleep_dmi_check(); sleep_states[ACPI_STATE_S0] = 1; acpi_sleep_syscore_init(); acpi_sleep_suspend_setup(); acpi_sleep_hibernate_setup(); if (acpi_sleep_state_supported(ACPI_STATE_S5)) { sleep_states[ACPI_STATE_S5] = 1; register_sys_off_handler(SYS_OFF_MODE_POWER_OFF_PREPARE, SYS_OFF_PRIO_FIRMWARE, acpi_power_off_prepare, NULL); register_sys_off_handler(SYS_OFF_MODE_POWER_OFF, SYS_OFF_PRIO_FIRMWARE, acpi_power_off, NULL); /* * Windows uses S5 for reboot, so some BIOSes depend on it to * perform proper reboot. */ register_sys_off_handler(SYS_OFF_MODE_RESTART_PREPARE, SYS_OFF_PRIO_FIRMWARE, acpi_power_off_prepare, NULL); } else { acpi_no_s5 = true; } supported[0] = 0; for (i = 0; i < ACPI_S_STATE_COUNT; i++) { if (sleep_states[i]) pos += sprintf(pos, " S%d", i); } pr_info("(supports%s)\n", supported); /* * Register the tts_notifier to reboot notifier list so that the _TTS * object can also be evaluated when the system enters S5. */ register_reboot_notifier(&tts_notifier); return 0; }