From 658bb297e3930b90f80c08ddff18b4065b89a132 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 17 Jul 2020 10:59:59 -0300 Subject: ASoC: wm8962: Do not access WM8962_GPIO_BASE According to the WM8962 datasheet, there is no register at address 0x200. WM8962_GPIO_BASE is just a base address for the GPIO registers and not a real register, so remove it from wm8962_readable_register(). Also, Register 515 (WM8962_GPIO_BASE + 3) does not exist, so skip its access. This fixes the following errors: wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16 wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16 Signed-off-by: Fabio Estevam Acked-by: Charles Keepax Link: https://lore.kernel.org/r/20200717135959.19212-1-festevam@gmail.com Signed-off-by: Mark Brown --- sound/soc/codecs/wm8962.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 25c9600c1906..317916cb4e27 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -151,6 +151,7 @@ static const struct reg_default wm8962_reg[] = { { 40, 0x0000 }, /* R40 - SPKOUTL volume */ { 41, 0x0000 }, /* R41 - SPKOUTR volume */ + { 48, 0x0000 }, /* R48 - Additional control(4) */ { 49, 0x0010 }, /* R49 - Class D Control 1 */ { 51, 0x0003 }, /* R51 - Class D Control 2 */ @@ -841,7 +842,6 @@ static bool wm8962_readable_register(struct device *dev, unsigned int reg) case WM8962_SPKOUTL_VOLUME: case WM8962_SPKOUTR_VOLUME: case WM8962_THERMAL_SHUTDOWN_STATUS: - case WM8962_ADDITIONAL_CONTROL_4: case WM8962_CLASS_D_CONTROL_1: case WM8962_CLASS_D_CONTROL_2: case WM8962_CLOCKING_4: @@ -956,7 +956,6 @@ static bool wm8962_readable_register(struct device *dev, unsigned int reg) case WM8962_EQ39: case WM8962_EQ40: case WM8962_EQ41: - case WM8962_GPIO_BASE: case WM8962_GPIO_2: case WM8962_GPIO_3: case WM8962_GPIO_5: @@ -3438,7 +3437,13 @@ static int wm8962_probe(struct snd_soc_component *component) /* Save boards having to disable DMIC when not in use */ dmicclk = false; dmicdat = false; - for (i = 0; i < WM8962_MAX_GPIO; i++) { + for (i = 1; i < WM8962_MAX_GPIO; i++) { + /* + * Register 515 (WM8962_GPIO_BASE + 3) does not exist, + * so skip its access + */ + if (i == 3) + continue; switch (snd_soc_component_read(component, WM8962_GPIO_BASE + i) & WM8962_GP2_FN_MASK) { case WM8962_GPIO_FN_DMICCLK: -- cgit v1.2.3