From ce3467c78478e33927aea9043bf20f46fa4d5688 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 19 May 2022 16:42:48 +0100 Subject: ASoC: ux500: Update to use set_fmt_new callback As part of updating the core to directly tell drivers if they are clock provider or consumer update this CPU side driver to use the new direct callback. Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20220519154318.2153729-27-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/ux500/ux500_msp_dai.c | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) (limited to 'sound/soc/ux500') diff --git a/sound/soc/ux500/ux500_msp_dai.c b/sound/soc/ux500/ux500_msp_dai.c index 21052378a32e..cd6c4bdf5041 100644 --- a/sound/soc/ux500/ux500_msp_dai.c +++ b/sound/soc/ux500/ux500_msp_dai.c @@ -191,8 +191,8 @@ static int setup_clocking(struct snd_soc_dai *dai, return -EINVAL; } - switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { - case SND_SOC_DAIFMT_CBM_CFM: + switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) { + case SND_SOC_DAIFMT_BC_FC: dev_dbg(dai->dev, "%s: Codec is master.\n", __func__); msp_config->iodelay = 0x20; @@ -204,7 +204,7 @@ static int setup_clocking(struct snd_soc_dai *dai, break; - case SND_SOC_DAIFMT_CBS_CFS: + case SND_SOC_DAIFMT_BP_FP: dev_dbg(dai->dev, "%s: Codec is slave.\n", __func__); msp_config->tx_clk_sel = TX_CLK_SEL_SRG; @@ -328,15 +328,15 @@ static int setup_msp_config(struct snd_pcm_substream *substream, dev_dbg(dai->dev, "%s: rate: %u, channels: %d.\n", __func__, runtime->rate, runtime->channels); switch (fmt & - (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK)) { + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_BP_FP: dev_dbg(dai->dev, "%s: SND_SOC_DAIFMT_I2S.\n", __func__); msp_config->default_protdesc = 1; msp_config->protocol = MSP_I2S_PROTOCOL; break; - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_BC_FC: dev_dbg(dai->dev, "%s: SND_SOC_DAIFMT_I2S.\n", __func__); msp_config->data_size = MSP_DATA_BITS_16; @@ -348,10 +348,10 @@ static int setup_msp_config(struct snd_pcm_substream *substream, break; - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: - case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBS_CFS: - case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_BP_FP: + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_BC_FC: + case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_BP_FP: + case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_BC_FC: dev_dbg(dai->dev, "%s: PCM format.\n", __func__); msp_config->data_size = MSP_DATA_BITS_16; @@ -477,7 +477,7 @@ static int ux500_msp_dai_prepare(struct snd_pcm_substream *substream, } /* Set OPP-level */ - if ((drvdata->fmt & SND_SOC_DAIFMT_MASTER_MASK) && + if ((drvdata->fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) && (drvdata->msp->f_bitclk > 19200000)) { /* If the bit-clock is higher than 19.2MHz, Vape should be * run in 100% OPP. Only when bit-clock is used (MSP master) @@ -544,13 +544,13 @@ static int ux500_msp_dai_set_dai_fmt(struct snd_soc_dai *dai, dev_dbg(dai->dev, "%s: MSP %d: Enter.\n", __func__, dai->id); switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK | - SND_SOC_DAIFMT_MASTER_MASK)) { - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: - case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBS_CFS: - case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBM_CFM: - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK)) { + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_BP_FP: + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_BC_FC: + case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_BP_FP: + case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_BC_FC: + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_BP_FP: + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_BC_FC: break; default: @@ -707,7 +707,7 @@ static int ux500_msp_dai_probe(struct snd_soc_dai *dai) static const struct snd_soc_dai_ops ux500_msp_dai_ops[] = { { .set_sysclk = ux500_msp_dai_set_dai_sysclk, - .set_fmt = ux500_msp_dai_set_dai_fmt, + .set_fmt_new = ux500_msp_dai_set_dai_fmt, .set_tdm_slot = ux500_msp_dai_set_tdm_slot, .startup = ux500_msp_dai_startup, .shutdown = ux500_msp_dai_shutdown, -- cgit v1.2.3 From e24ba1a21e244e7174e75ca0c4020beaff0ad369 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 19 May 2022 16:43:15 +0100 Subject: ASoC: ux500: Rename set_fmt_new back to set_fmt Now the core has been migrated across to the new direct clock specification we can move the drivers back to the normal set_fmt callback. Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20220519154318.2153729-54-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/ux500/ux500_msp_dai.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound/soc/ux500') diff --git a/sound/soc/ux500/ux500_msp_dai.c b/sound/soc/ux500/ux500_msp_dai.c index cd6c4bdf5041..851c3b8473fd 100644 --- a/sound/soc/ux500/ux500_msp_dai.c +++ b/sound/soc/ux500/ux500_msp_dai.c @@ -707,7 +707,7 @@ static int ux500_msp_dai_probe(struct snd_soc_dai *dai) static const struct snd_soc_dai_ops ux500_msp_dai_ops[] = { { .set_sysclk = ux500_msp_dai_set_dai_sysclk, - .set_fmt_new = ux500_msp_dai_set_dai_fmt, + .set_fmt = ux500_msp_dai_set_dai_fmt, .set_tdm_slot = ux500_msp_dai_set_tdm_slot, .startup = ux500_msp_dai_startup, .shutdown = ux500_msp_dai_shutdown, -- cgit v1.2.3