From b0dbcf511c4bd10350902e79a1bdd4f5dcca66b6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 4 Sep 2008 21:13:37 +0100 Subject: [NET] smc91x: provide configurable leds This patch provides a mechanism for platforms to be able to supply the LED configuration via platform data, rather than having to hard code it in smc91x.h. Acked-by: Eric Miao Acked-by: Nicolas Pitre Acked-by: Jeff Garzik Signed-off-by: Russell King --- drivers/net/smc91x.c | 9 ++++++++- drivers/net/smc91x.h | 2 +- 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 2040965d7724..ceed2f69216a 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1520,7 +1520,9 @@ smc_open(struct net_device *dev) /* Setup the default Register Modes */ lp->tcr_cur_mode = TCR_DEFAULT; lp->rcr_cur_mode = RCR_DEFAULT; - lp->rpc_cur_mode = RPC_DEFAULT; + lp->rpc_cur_mode = RPC_DEFAULT | + lp->cfg.leda << RPC_LSXA_SHFT | + lp->cfg.ledb << RPC_LSXB_SHFT; /* * If we are not using a MII interface, we need to @@ -2157,6 +2159,11 @@ static int smc_drv_probe(struct platform_device *pdev) lp->cfg.flags |= (nowait) ? SMC91X_NOWAIT : 0; } + if (!lp->cfg.leda && !lp->cfg.ledb) { + lp->cfg.leda = RPC_LSA_DEFAULT; + lp->cfg.ledb = RPC_LSB_DEFAULT; + } + ndev->dma = (unsigned char)-1; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs"); diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 997e7f1d5c6e..8322e7f37af5 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -794,7 +794,7 @@ smc_pxa_dma_irq(int dma, void *dummy) #define RPC_LSB_DEFAULT RPC_LED_FD #endif -#define RPC_DEFAULT (RPC_ANEG | (RPC_LSA_DEFAULT << RPC_LSXA_SHFT) | (RPC_LSB_DEFAULT << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX) +#define RPC_DEFAULT (RPC_ANEG | RPC_SPEED | RPC_DPLX) /* Bank 0 0x0C is reserved */ -- cgit v1.2.3 From fb683f1627745e937ef199edd3428ac4b2ef1e08 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 22 Aug 2008 16:36:28 +0200 Subject: Export smc91x led definitions Now that we can configure smc91x leds from its platform data, it seems rather useful to move the led definitions to the externally visible header file. Signed-off-by: Marc Zyngier --- drivers/net/smc91x.h | 8 -------- include/linux/smc91x.h | 9 +++++++++ 2 files changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 8322e7f37af5..bcbd645d88ce 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -778,14 +778,6 @@ smc_pxa_dma_irq(int dma, void *dummy) #define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode #define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb #define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb -#define RPC_LED_100_10 (0x00) // LED = 100Mbps OR's with 10Mbps link detect -#define RPC_LED_RES (0x01) // LED = Reserved -#define RPC_LED_10 (0x02) // LED = 10Mbps link detect -#define RPC_LED_FD (0x03) // LED = Full Duplex Mode -#define RPC_LED_TX_RX (0x04) // LED = TX or RX packet occurred -#define RPC_LED_100 (0x05) // LED = 100Mbps link dectect -#define RPC_LED_TX (0x06) // LED = TX packet occurred -#define RPC_LED_RX (0x07) // LED = RX packet occurred #ifndef RPC_LSA_DEFAULT #define RPC_LSA_DEFAULT RPC_LED_100 diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h index ed25483d25d9..bc21db598c06 100644 --- a/include/linux/smc91x.h +++ b/include/linux/smc91x.h @@ -16,6 +16,15 @@ #define SMC91X_USE_DMA (1 << 6) +#define RPC_LED_100_10 (0x00) /* LED = 100Mbps OR's with 10Mbps link detect */ +#define RPC_LED_RES (0x01) /* LED = Reserved */ +#define RPC_LED_10 (0x02) /* LED = 10Mbps link detect */ +#define RPC_LED_FD (0x03) /* LED = Full Duplex Mode */ +#define RPC_LED_TX_RX (0x04) /* LED = TX or RX packet occurred */ +#define RPC_LED_100 (0x05) /* LED = 100Mbps link dectect */ +#define RPC_LED_TX (0x06) /* LED = TX packet occurred */ +#define RPC_LED_RX (0x07) /* LED = RX packet occurred */ + struct smc91x_platdata { unsigned long flags; unsigned char leda; -- cgit v1.2.3 From 175ff20f6a681effa82d67e3656c4cc3e7117600 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 22 Jul 2008 16:59:44 +0200 Subject: Add support for the Arcom/Eurotech Viper SBC onboard ethernet. Signed-off-by: Marc Zyngier --- drivers/net/smc91x.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index bcbd645d88ce..160873f0a817 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -43,7 +43,8 @@ #if defined(CONFIG_ARCH_LUBBOCK) ||\ defined(CONFIG_MACH_MAINSTONE) ||\ defined(CONFIG_MACH_ZYLONITE) ||\ - defined(CONFIG_MACH_LITTLETON) + defined(CONFIG_MACH_LITTLETON) ||\ + defined(CONFIG_ARCH_VIPER) #include -- cgit v1.2.3 From 20f18ff32fe311f60770ac70395b01c06758923b Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 19 Aug 2008 12:15:53 +0200 Subject: Add support for the Arcom/Eurotech Viper SBC CompactFlash card slot The Arcom/Eurotech Viper needs some extra care to run. On this board, the PC104 connector is actually wired to the second PCMCIA slot. Therefore, this second socket needs to be enabled, despite not being managed by the PCMCIA code. I'd rather have the MECR setup in the platform support code so I could, for example, use the PC104 bus without having the PCMCIA module loaded. Signed-off-by: Marc Zyngier --- drivers/pcmcia/Kconfig | 2 +- drivers/pcmcia/Makefile | 1 + drivers/pcmcia/pxa2xx_base.c | 44 +++++------ drivers/pcmcia/pxa2xx_viper.c | 179 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 203 insertions(+), 23 deletions(-) create mode 100644 drivers/pcmcia/pxa2xx_viper.c (limited to 'drivers') diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index e0f884034c9f..de57e7e17868 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -220,7 +220,7 @@ config PCMCIA_PXA2XX tristate "PXA2xx support" depends on ARM && ARCH_PXA && PCMCIA depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ - || MACH_ARMCORE || ARCH_PXA_PALM) + || MACH_ARMCORE || ARCH_PXA_PALM || ARCH_VIPER) help Say Y here to include support for the PXA2xx PCMCIA controller diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 269a9e913ba2..76e859073cbb 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -72,5 +72,6 @@ pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock.o sa1111_generic.o pxa2xx_cs-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o pxa2xx_cs-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o pxa2xx_cs-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x270.o +pxa2xx_cs-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o pxa2xx_cs-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 1b07af5a2ed3..13f1e0fd3f31 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -166,18 +167,32 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt, } #endif +static void pxa2xx_configure_sockets(struct device *dev) +{ + struct pcmcia_low_level *ops = dev->platform_data; + + /* + * We have at least one socket, so set MECR:CIT + * (Card Is There) + */ + MECR |= MECR_CIT; + + /* Set MECR:NOS (Number Of Sockets) */ + if (ops->nr > 1 || machine_is_viper()) + MECR |= MECR_NOS; + else + MECR &= ~MECR_NOS; +} + int __pxa2xx_drv_pcmcia_probe(struct device *dev) { int ret; struct pcmcia_low_level *ops; - int first, nr; if (!dev || !dev->platform_data) return -ENODEV; ops = (struct pcmcia_low_level *)dev->platform_data; - first = ops->first; - nr = ops->nr; /* Provide our PXA2xx specific timing routines. */ ops->set_timing = pxa2xx_pcmcia_set_timing; @@ -185,21 +200,10 @@ int __pxa2xx_drv_pcmcia_probe(struct device *dev) ops->frequency_change = pxa2xx_pcmcia_frequency_change; #endif - ret = soc_common_drv_pcmcia_probe(dev, ops, first, nr); + ret = soc_common_drv_pcmcia_probe(dev, ops, ops->first, ops->nr); - if (ret == 0) { - /* - * We have at least one socket, so set MECR:CIT - * (Card Is There) - */ - MECR |= MECR_CIT; - - /* Set MECR:NOS (Number Of Sockets) */ - if (nr > 1) - MECR |= MECR_NOS; - else - MECR &= ~MECR_NOS; - } + if (!ret) + pxa2xx_configure_sockets(dev); return ret; } @@ -223,11 +227,7 @@ static int pxa2xx_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t s static int pxa2xx_drv_pcmcia_resume(struct platform_device *dev) { - struct pcmcia_low_level *ops = dev->dev.platform_data; - int nr = ops ? ops->nr : 0; - - MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0); - + pxa2xx_configure_sockets(&dev->dev); return pcmcia_socket_dev_resume(&dev->dev); } diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c new file mode 100644 index 000000000000..dd10481be7bf --- /dev/null +++ b/drivers/pcmcia/pxa2xx_viper.c @@ -0,0 +1,179 @@ +/* + * VIPER PCMCIA support + * Copyright 2004 Arcom Control Systems + * + * Maintained by Marc Zyngier + * + * + * Based on: + * iPAQ h2200 PCMCIA support + * Copyright 2004 Koen Kooi + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#include +#include +#include + +#include "soc_common.h" +#include "pxa2xx_base.h" + +static struct pcmcia_irqs irqs[] = { + { 0, gpio_to_irq(VIPER_CF_CD_GPIO), "PCMCIA_CD" } +}; + +static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + unsigned long flags; + + skt->irq = gpio_to_irq(VIPER_CF_RDY_GPIO); + + if (gpio_request(VIPER_CF_CD_GPIO, "CF detect")) + goto err_request_cd; + + if (gpio_request(VIPER_CF_RDY_GPIO, "CF ready")) + goto err_request_rdy; + + if (gpio_request(VIPER_CF_POWER_GPIO, "CF power")) + goto err_request_pwr; + + local_irq_save(flags); + + /* GPIO 82 is the CF power enable line. initially off */ + if (gpio_direction_output(VIPER_CF_POWER_GPIO, 0) || + gpio_direction_input(VIPER_CF_CD_GPIO) || + gpio_direction_input(VIPER_CF_RDY_GPIO)) { + local_irq_restore(flags); + goto err_dir; + } + + local_irq_restore(flags); + + return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); + +err_dir: + gpio_free(VIPER_CF_POWER_GPIO); +err_request_pwr: + gpio_free(VIPER_CF_RDY_GPIO); +err_request_rdy: + gpio_free(VIPER_CF_CD_GPIO); +err_request_cd: + printk(KERN_ERR "viper: Failed to setup PCMCIA GPIOs\n"); + return -1; +} + +/* + * Release all resources. + */ +static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); + gpio_free(VIPER_CF_POWER_GPIO); + gpio_free(VIPER_CF_RDY_GPIO); + gpio_free(VIPER_CF_CD_GPIO); +} + +static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->detect = gpio_get_value(VIPER_CF_CD_GPIO) ? 0 : 1; + state->ready = gpio_get_value(VIPER_CF_RDY_GPIO) ? 1 : 0; + state->bvd1 = 1; + state->bvd2 = 1; + state->wrprot = 0; + state->vs_3v = 1; /* Can only apply 3.3V */ + state->vs_Xv = 0; +} + +static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + /* Silently ignore Vpp, output enable, speaker enable. */ + viper_cf_rst(state->flags & SS_RESET); + + /* Apply socket voltage */ + switch (state->Vcc) { + case 0: + gpio_set_value(VIPER_CF_POWER_GPIO, 0); + break; + case 33: + gpio_set_value(VIPER_CF_POWER_GPIO, 1); + break; + default: + printk(KERN_ERR "%s: Unsupported Vcc:%d\n", + __func__, state->Vcc); + return -1; + } + + return 0; +} + +static void viper_pcmcia_socket_init(struct soc_pcmcia_socket *skt) +{ +} + +static void viper_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) +{ +} + +static struct pcmcia_low_level viper_pcmcia_ops __initdata = { + .owner = THIS_MODULE, + .hw_init = viper_pcmcia_hw_init, + .hw_shutdown = viper_pcmcia_hw_shutdown, + .socket_state = viper_pcmcia_socket_state, + .configure_socket = viper_pcmcia_configure_socket, + .socket_init = viper_pcmcia_socket_init, + .socket_suspend = viper_pcmcia_socket_suspend, + .nr = 1, +}; + +static struct platform_device *viper_pcmcia_device; + +static int __init viper_pcmcia_init(void) +{ + int ret; + + if (!machine_is_viper()) + return -ENODEV; + + viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!viper_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(viper_pcmcia_device, + &viper_pcmcia_ops, + sizeof(viper_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(viper_pcmcia_device); + + if (ret) + platform_device_put(viper_pcmcia_device); + + return ret; +} + +static void __exit viper_pcmcia_exit(void) +{ + platform_device_unregister(viper_pcmcia_device); +} + +module_init(viper_pcmcia_init); +module_exit(viper_pcmcia_exit); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3