From 6faace2a0e418b45728bcea6d3626922cf16b14b Mon Sep 17 00:00:00 2001 From: "nagalakshmi.nandigama@lsi.com" Date: Wed, 19 Oct 2011 15:37:37 +0530 Subject: [SCSI] mpt2sas: Fix for issue Port Reset taking long time(around 5 mins) to complete while issued during creating a volume This is due to the slave_configuration routine is getting called when host reset is active, and config page reads are failing, and driver attempts to added device with stale config data. To fix the issue, added error checking in slave_configure to check for configuration pages failing, and return "1" so the device is not configured. The config pages are failing if raid volume is configured while issuing a host reset, thus driver is reading stale data and proceeding to attempt to add. The fix is to return error so the volume is not configured. Signed-off-by: Nagalakshmi Nandigama Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 62 ++++++++++++++++++++++++++---------- 1 file changed, 45 insertions(+), 17 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 1f289882a298..a8cb57723ff4 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -1621,8 +1621,10 @@ _scsih_set_level(struct scsi_device *sdev, struct _raid_device *raid_device) * _scsih_get_volume_capabilities - volume capabilities * @ioc: per adapter object * @sas_device: the raid_device object + * + * Returns 0 for success, else 1 */ -static void +static int _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc, struct _raid_device *raid_device) { @@ -1635,9 +1637,10 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc, if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle, &num_pds)) || !num_pds) { - printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", - ioc->name, __FILE__, __LINE__, __func__); - return; + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, + __func__)); + return 1; } raid_device->num_pds = num_pds; @@ -1645,17 +1648,19 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc, sizeof(Mpi2RaidVol0PhysDisk_t)); vol_pg0 = kzalloc(sz, GFP_KERNEL); if (!vol_pg0) { - printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", - ioc->name, __FILE__, __LINE__, __func__); - return; + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, + __func__)); + return 1; } if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) { - printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", - ioc->name, __FILE__, __LINE__, __func__); + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, + __func__)); kfree(vol_pg0); - return; + return 1; } raid_device->volume_type = vol_pg0->VolumeType; @@ -1675,6 +1680,7 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc, } kfree(vol_pg0); + return 0; } /** * _scsih_disable_ddio - Disable direct I/O for all the volumes @@ -1945,13 +1951,20 @@ _scsih_slave_configure(struct scsi_device *sdev) sas_target_priv_data->handle); spin_unlock_irqrestore(&ioc->raid_device_lock, flags); if (!raid_device) { - printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", - ioc->name, __FILE__, __LINE__, __func__); - return 0; + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, + __LINE__, __func__)); + return 1; } _scsih_get_volume_capabilities(ioc, raid_device); + if (_scsih_get_volume_capabilities(ioc, raid_device)) { + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, + __LINE__, __func__)); + return 1; + } /* * WARPDRIVE: Initialize the required data for Direct IO */ @@ -2025,11 +2038,21 @@ _scsih_slave_configure(struct scsi_device *sdev) if (sas_device) { if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) { - mpt2sas_config_get_volume_handle(ioc, - sas_device->handle, &sas_device->volume_handle); - mpt2sas_config_get_volume_wwid(ioc, + if (mpt2sas_config_get_volume_handle(ioc, + sas_device->handle, &sas_device->volume_handle)) { + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__)); + return 1; + } + if (mpt2sas_config_get_volume_wwid(ioc, sas_device->volume_handle, - &sas_device->volume_wwid); + &sas_device->volume_wwid)) { + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__)); + return 1; + } } if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) { qdepth = MPT2SAS_SAS_QUEUE_DEPTH; @@ -2058,6 +2081,11 @@ _scsih_slave_configure(struct scsi_device *sdev) if (!ssp_target) _scsih_display_sata_capabilities(ioc, sas_device, sdev); + } else { + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, + __func__)); + return 1; } _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT); -- cgit v1.2.3