From 354c796b9270eb4780e59e3bdb83a3ae4930a832 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Dec 2020 22:46:17 +0100 Subject: rtc: core: Make the sync offset default more realistic The offset which is used to steer the start of an RTC synchronization update via rtc_set_ntp_time() is huge. The math behind this is: tsched twrite(t2.tv_sec - 1) t2 (seconds increment) twrite - tsched is the transport time for the write to hit the device. t2 - twrite depends on the chip and is for most chips one second. The rtc_set_ntp_time() calculation of tsched is: tsched = t2 - 1sec - (t2 - twrite) The default for the sync offset is 500ms which means that twrite - tsched is 500ms assumed that t2 - twrite is one second. This is 0.5 seconds off for RTCs which are directly accessible by IO writes and probably for the majority of i2C/SPI based RTC off by an order of magnitude. Set it to 5ms which should bring it closer to reality. The default can be adjusted by drivers (rtc_cmos does so) and could be adjusted further by a calibration method which is an orthogonal problem. Signed-off-by: Thomas Gleixner Reviewed-by: Jason Gunthorpe Acked-by: Alexandre Belloni Link: https://lore.kernel.org/r/20201206220541.960333166@linutronix.de --- drivers/rtc/class.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/rtc') diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c index 7c88d190c51f..d7957376eb96 100644 --- a/drivers/rtc/class.c +++ b/drivers/rtc/class.c @@ -201,7 +201,7 @@ static struct rtc_device *rtc_allocate_device(void) device_initialize(&rtc->dev); /* Drivers can revise this default after allocating the device. */ - rtc->set_offset_nsec = NSEC_PER_SEC / 2; + rtc->set_offset_nsec = 5 * NSEC_PER_MSEC; rtc->irq_freq = 1; rtc->max_user_freq = 64; -- cgit v1.2.3