From 4a4ce82212ef014d70f486a427005b2b5bab8e34 Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Tue, 30 Aug 2022 08:40:55 +0200 Subject: net: phy: micrel: Make the GPIO to be non-exclusive The same GPIO line can be shared by multiple phys for the coma mode pin. If that is the case then, all the other phys that share the same line will failed to be probed because the access to the gpio line is not non-exclusive. Fix this by making access to the gpio line to be nonexclusive using flag GPIOD_FLAGS_BIT_NONEXCLUSIVE. This allows all the other PHYs to be probed. Fixes: 738871b09250ee ("net: phy: micrel: add coma mode GPIO") Reviewed-by: Andrew Lunn Signed-off-by: Horatiu Vultur Link: https://lore.kernel.org/r/20220830064055.2340403-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski --- drivers/net/phy/micrel.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index e78d0bf69bc3..6f52b4fb6888 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -2873,12 +2873,18 @@ static int lan8814_config_init(struct phy_device *phydev) return 0; } +/* It is expected that there will not be any 'lan8814_take_coma_mode' + * function called in suspend. Because the GPIO line can be shared, so if one of + * the phys goes back in coma mode, then all the other PHYs will go, which is + * wrong. + */ static int lan8814_release_coma_mode(struct phy_device *phydev) { struct gpio_desc *gpiod; gpiod = devm_gpiod_get_optional(&phydev->mdio.dev, "coma-mode", - GPIOD_OUT_HIGH_OPEN_DRAIN); + GPIOD_OUT_HIGH_OPEN_DRAIN | + GPIOD_FLAGS_BIT_NONEXCLUSIVE); if (IS_ERR(gpiod)) return PTR_ERR(gpiod); -- cgit v1.2.3