From b77899985bdfd85a8e5a6e485033a9b4713d2471 Mon Sep 17 00:00:00 2001 From: Alex Dubov Date: Fri, 25 Jul 2008 19:45:00 -0700 Subject: memstick: allow "set_param" method to return an error code Some controllers (Jmicron, for instance) can report temporal failure condition during power-on. It is desirable to account for this using a return value of "set_param" device method. The return value can also be handy to distinguish between supported and unsupported device parameters in run time. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alex Dubov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/memstick/host/jmb38x_ms.c | 67 ++++++++++++++++++++++++++++----------- drivers/memstick/host/tifm_ms.c | 17 +++++----- 2 files changed, 57 insertions(+), 27 deletions(-) (limited to 'drivers/memstick/host') diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c index 4e3bfbcdf155..9d82e67737db 100644 --- a/drivers/memstick/host/jmb38x_ms.c +++ b/drivers/memstick/host/jmb38x_ms.c @@ -609,36 +609,68 @@ static void jmb38x_ms_request(struct memstick_host *msh) spin_unlock_irqrestore(&host->lock, flags); } -static void jmb38x_ms_reset(struct jmb38x_ms_host *host) +static int jmb38x_ms_reset(struct jmb38x_ms_host *host) { - unsigned int host_ctl = readl(host->addr + HOST_CONTROL); + int cnt; - writel(HOST_CONTROL_RESET_REQ, host->addr + HOST_CONTROL); + writel(HOST_CONTROL_RESET_REQ | HOST_CONTROL_CLOCK_EN + | readl(host->addr + HOST_CONTROL), + host->addr + HOST_CONTROL); + mmiowb(); + + for (cnt = 0; cnt < 20; ++cnt) { + if (!(HOST_CONTROL_RESET_REQ + & readl(host->addr + HOST_CONTROL))) + goto reset_next; - while (HOST_CONTROL_RESET_REQ - & (host_ctl = readl(host->addr + HOST_CONTROL))) { ndelay(20); - dev_dbg(&host->chip->pdev->dev, "reset %08x\n", host_ctl); } + dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n"); + return -EIO; - writel(HOST_CONTROL_RESET, host->addr + HOST_CONTROL); +reset_next: + writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN + | readl(host->addr + HOST_CONTROL), + host->addr + HOST_CONTROL); + mmiowb(); + + for (cnt = 0; cnt < 20; ++cnt) { + if (!(HOST_CONTROL_RESET + & readl(host->addr + HOST_CONTROL))) + goto reset_ok; + + ndelay(20); + } + dev_dbg(&host->chip->pdev->dev, "reset timeout\n"); + return -EIO; + +reset_ok: mmiowb(); writel(INT_STATUS_ALL, host->addr + INT_SIGNAL_ENABLE); writel(INT_STATUS_ALL, host->addr + INT_STATUS_ENABLE); + return 0; } -static void jmb38x_ms_set_param(struct memstick_host *msh, - enum memstick_param param, - int value) +static int jmb38x_ms_set_param(struct memstick_host *msh, + enum memstick_param param, + int value) { struct jmb38x_ms_host *host = memstick_priv(msh); unsigned int host_ctl = readl(host->addr + HOST_CONTROL); unsigned int clock_ctl = CLOCK_CONTROL_40MHZ, clock_delay = 0; + int rc = 0; switch (param) { case MEMSTICK_POWER: if (value == MEMSTICK_POWER_ON) { - jmb38x_ms_reset(host); + rc = jmb38x_ms_reset(host); + if (rc) + return rc; + + host_ctl = 7; + host_ctl |= HOST_CONTROL_POWER_EN + | HOST_CONTROL_CLOCK_EN; + writel(host_ctl, host->addr + HOST_CONTROL); writel(host->id ? PAD_PU_PD_ON_MS_SOCK1 : PAD_PU_PD_ON_MS_SOCK0, @@ -647,11 +679,7 @@ static void jmb38x_ms_set_param(struct memstick_host *msh, writel(PAD_OUTPUT_ENABLE_MS, host->addr + PAD_OUTPUT_ENABLE); - host_ctl = 7; - host_ctl |= HOST_CONTROL_POWER_EN - | HOST_CONTROL_CLOCK_EN; - writel(host_ctl, host->addr + HOST_CONTROL); - + msleep(10); dev_dbg(&host->chip->pdev->dev, "power on\n"); } else if (value == MEMSTICK_POWER_OFF) { host_ctl &= ~(HOST_CONTROL_POWER_EN @@ -660,7 +688,8 @@ static void jmb38x_ms_set_param(struct memstick_host *msh, writel(0, host->addr + PAD_OUTPUT_ENABLE); writel(PAD_PU_PD_OFF, host->addr + PAD_PU_PD); dev_dbg(&host->chip->pdev->dev, "power off\n"); - } + } else + return -EINVAL; break; case MEMSTICK_INTERFACE: host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT); @@ -686,12 +715,14 @@ static void jmb38x_ms_set_param(struct memstick_host *msh, host_ctl &= ~HOST_CONTROL_REI; clock_ctl = CLOCK_CONTROL_60MHZ; clock_delay = 0; - } + } else + return -EINVAL; writel(host_ctl, host->addr + HOST_CONTROL); writel(clock_ctl, host->addr + CLOCK_CONTROL); writel(clock_delay, host->addr + CLOCK_DELAY); break; }; + return 0; } #ifdef CONFIG_PM diff --git a/drivers/memstick/host/tifm_ms.c b/drivers/memstick/host/tifm_ms.c index 8577de4ebb0e..14458764588c 100644 --- a/drivers/memstick/host/tifm_ms.c +++ b/drivers/memstick/host/tifm_ms.c @@ -489,15 +489,12 @@ static void tifm_ms_request(struct memstick_host *msh) return; } -static void tifm_ms_set_param(struct memstick_host *msh, - enum memstick_param param, - int value) +static int tifm_ms_set_param(struct memstick_host *msh, + enum memstick_param param, + int value) { struct tifm_ms *host = memstick_priv(msh); struct tifm_dev *sock = host->dev; - unsigned long flags; - - spin_lock_irqsave(&sock->lock, flags); switch (param) { case MEMSTICK_POWER: @@ -512,7 +509,8 @@ static void tifm_ms_set_param(struct memstick_host *msh, writel(TIFM_MS_SYS_FCLR | TIFM_MS_SYS_INTCLR, sock->addr + SOCK_MS_SYSTEM); writel(0xffffffff, sock->addr + SOCK_MS_STATUS); - } + } else + return -EINVAL; break; case MEMSTICK_INTERFACE: if (value == MEMSTICK_SERIAL) { @@ -525,11 +523,12 @@ static void tifm_ms_set_param(struct memstick_host *msh, writel(TIFM_CTRL_FAST_CLK | readl(sock->addr + SOCK_CONTROL), sock->addr + SOCK_CONTROL); - } + } else + return -EINVAL; break; }; - spin_unlock_irqrestore(&sock->lock, flags); + return 0; } static void tifm_ms_abort(unsigned long data) -- cgit v1.2.3