From baa6d396635129d8a67793e884f3b2182c7354b3 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 1 Feb 2017 12:48:44 -0700 Subject: fpga: Add scatterlist based programming Requiring contiguous kernel memory is not a good idea, this is a limited resource and allocation can fail under normal work loads. This introduces a .write_sg op that supporting drivers can provide to DMA directly from dis-contiguous memory and a new entry point fpga_mgr_buf_load_sg that users can call to directly provide page lists. The full matrix of compatibility is provided, either the linear or sg interface can be used by the user with a driver supporting either interface. A notable change for drivers is that the .write op can now be called multiple times. Signed-off-by: Jason Gunthorpe Acked-by: Alan Tull Acked-by: Moritz Fischer Signed-off-by: Greg Kroah-Hartman --- drivers/fpga/fpga-mgr.c | 236 ++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 206 insertions(+), 30 deletions(-) (limited to 'drivers/fpga/fpga-mgr.c') diff --git a/drivers/fpga/fpga-mgr.c b/drivers/fpga/fpga-mgr.c index f0a69d3e60a5..86d2cb203533 100644 --- a/drivers/fpga/fpga-mgr.c +++ b/drivers/fpga/fpga-mgr.c @@ -25,16 +25,106 @@ #include #include #include +#include +#include static DEFINE_IDA(fpga_mgr_ida); static struct class *fpga_mgr_class; +/* + * Call the low level driver's write_init function. This will do the + * device-specific things to get the FPGA into the state where it is ready to + * receive an FPGA image. The low level driver only gets to see the first + * initial_header_size bytes in the buffer. + */ +static int fpga_mgr_write_init_buf(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *buf, size_t count) +{ + int ret; + + mgr->state = FPGA_MGR_STATE_WRITE_INIT; + if (!mgr->mops->initial_header_size) + ret = mgr->mops->write_init(mgr, info, NULL, 0); + else + ret = mgr->mops->write_init( + mgr, info, buf, min(mgr->mops->initial_header_size, count)); + + if (ret) { + dev_err(&mgr->dev, "Error preparing FPGA for writing\n"); + mgr->state = FPGA_MGR_STATE_WRITE_INIT_ERR; + return ret; + } + + return 0; +} + +static int fpga_mgr_write_init_sg(struct fpga_manager *mgr, + struct fpga_image_info *info, + struct sg_table *sgt) +{ + struct sg_mapping_iter miter; + size_t len; + char *buf; + int ret; + + if (!mgr->mops->initial_header_size) + return fpga_mgr_write_init_buf(mgr, info, NULL, 0); + + /* + * First try to use miter to map the first fragment to access the + * header, this is the typical path. + */ + sg_miter_start(&miter, sgt->sgl, sgt->nents, SG_MITER_FROM_SG); + if (sg_miter_next(&miter) && + miter.length >= mgr->mops->initial_header_size) { + ret = fpga_mgr_write_init_buf(mgr, info, miter.addr, + miter.length); + sg_miter_stop(&miter); + return ret; + } + sg_miter_stop(&miter); + + /* Otherwise copy the fragments into temporary memory. */ + buf = kmalloc(mgr->mops->initial_header_size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + len = sg_copy_to_buffer(sgt->sgl, sgt->nents, buf, + mgr->mops->initial_header_size); + ret = fpga_mgr_write_init_buf(mgr, info, buf, len); + + kfree(buf); + + return ret; +} + +/* + * After all the FPGA image has been written, do the device specific steps to + * finish and set the FPGA into operating mode. + */ +static int fpga_mgr_write_complete(struct fpga_manager *mgr, + struct fpga_image_info *info) +{ + int ret; + + mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE; + ret = mgr->mops->write_complete(mgr, info); + if (ret) { + dev_err(&mgr->dev, "Error after writing image data to FPGA\n"); + mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE_ERR; + return ret; + } + mgr->state = FPGA_MGR_STATE_OPERATING; + + return 0; +} + /** - * fpga_mgr_buf_load - load fpga from image in buffer + * fpga_mgr_buf_load_sg - load fpga from image in buffer from a scatter list * @mgr: fpga manager * @info: fpga image specific information - * @buf: buffer contain fpga image - * @count: byte count of buf + * @sgt: scatterlist table * * Step the low level fpga manager through the device-specific steps of getting * an FPGA ready to be configured, writing the image to it, then doing whatever @@ -42,54 +132,139 @@ static struct class *fpga_mgr_class; * mgr pointer from of_fpga_mgr_get() or fpga_mgr_get() and checked that it is * not an error code. * + * This is the preferred entry point for FPGA programming, it does not require + * any contiguous kernel memory. + * * Return: 0 on success, negative error code otherwise. */ -int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info, - const char *buf, size_t count) +int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, struct fpga_image_info *info, + struct sg_table *sgt) { - struct device *dev = &mgr->dev; int ret; - /* - * Call the low level driver's write_init function. This will do the - * device-specific things to get the FPGA into the state where it is - * ready to receive an FPGA image. The low level driver only gets to - * see the first initial_header_size bytes in the buffer. - */ - mgr->state = FPGA_MGR_STATE_WRITE_INIT; - ret = mgr->mops->write_init(mgr, info, buf, - min(mgr->mops->initial_header_size, count)); + ret = fpga_mgr_write_init_sg(mgr, info, sgt); + if (ret) + return ret; + + /* Write the FPGA image to the FPGA. */ + mgr->state = FPGA_MGR_STATE_WRITE; + if (mgr->mops->write_sg) { + ret = mgr->mops->write_sg(mgr, sgt); + } else { + struct sg_mapping_iter miter; + + sg_miter_start(&miter, sgt->sgl, sgt->nents, SG_MITER_FROM_SG); + while (sg_miter_next(&miter)) { + ret = mgr->mops->write(mgr, miter.addr, miter.length); + if (ret) + break; + } + sg_miter_stop(&miter); + } + if (ret) { - dev_err(dev, "Error preparing FPGA for writing\n"); - mgr->state = FPGA_MGR_STATE_WRITE_INIT_ERR; + dev_err(&mgr->dev, "Error while writing image data to FPGA\n"); + mgr->state = FPGA_MGR_STATE_WRITE_ERR; return ret; } + return fpga_mgr_write_complete(mgr, info); +} +EXPORT_SYMBOL_GPL(fpga_mgr_buf_load_sg); + +static int fpga_mgr_buf_load_mapped(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *buf, size_t count) +{ + int ret; + + ret = fpga_mgr_write_init_buf(mgr, info, buf, count); + if (ret) + return ret; + /* * Write the FPGA image to the FPGA. */ mgr->state = FPGA_MGR_STATE_WRITE; ret = mgr->mops->write(mgr, buf, count); if (ret) { - dev_err(dev, "Error while writing image data to FPGA\n"); + dev_err(&mgr->dev, "Error while writing image data to FPGA\n"); mgr->state = FPGA_MGR_STATE_WRITE_ERR; return ret; } + return fpga_mgr_write_complete(mgr, info); +} + +/** + * fpga_mgr_buf_load - load fpga from image in buffer + * @mgr: fpga manager + * @flags: flags setting fpga confuration modes + * @buf: buffer contain fpga image + * @count: byte count of buf + * + * Step the low level fpga manager through the device-specific steps of getting + * an FPGA ready to be configured, writing the image to it, then doing whatever + * post-configuration steps necessary. This code assumes the caller got the + * mgr pointer from of_fpga_mgr_get() and checked that it is not an error code. + * + * Return: 0 on success, negative error code otherwise. + */ +int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info, + const char *buf, size_t count) +{ + struct page **pages; + struct sg_table sgt; + const void *p; + int nr_pages; + int index; + int rc; + /* - * After all the FPGA image has been written, do the device specific - * steps to finish and set the FPGA into operating mode. + * This is just a fast path if the caller has already created a + * contiguous kernel buffer and the driver doesn't require SG, non-SG + * drivers will still work on the slow path. */ - mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE; - ret = mgr->mops->write_complete(mgr, info); - if (ret) { - dev_err(dev, "Error after writing image data to FPGA\n"); - mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE_ERR; - return ret; + if (mgr->mops->write) + return fpga_mgr_buf_load_mapped(mgr, info, buf, count); + + /* + * Convert the linear kernel pointer into a sg_table of pages for use + * by the driver. + */ + nr_pages = DIV_ROUND_UP((unsigned long)buf + count, PAGE_SIZE) - + (unsigned long)buf / PAGE_SIZE; + pages = kmalloc_array(nr_pages, sizeof(struct page *), GFP_KERNEL); + if (!pages) + return -ENOMEM; + + p = buf - offset_in_page(buf); + for (index = 0; index < nr_pages; index++) { + if (is_vmalloc_addr(p)) + pages[index] = vmalloc_to_page(p); + else + pages[index] = kmap_to_page((void *)p); + if (!pages[index]) { + kfree(pages); + return -EFAULT; + } + p += PAGE_SIZE; } - mgr->state = FPGA_MGR_STATE_OPERATING; - return 0; + /* + * The temporary pages list is used to code share the merging algorithm + * in sg_alloc_table_from_pages + */ + rc = sg_alloc_table_from_pages(&sgt, pages, index, offset_in_page(buf), + count, GFP_KERNEL); + kfree(pages); + if (rc) + return rc; + + rc = fpga_mgr_buf_load_sg(mgr, info, &sgt); + sg_free_table(&sgt); + + return rc; } EXPORT_SYMBOL_GPL(fpga_mgr_buf_load); @@ -291,8 +466,9 @@ int fpga_mgr_register(struct device *dev, const char *name, struct fpga_manager *mgr; int id, ret; - if (!mops || !mops->write_init || !mops->write || - !mops->write_complete || !mops->state) { + if (!mops || !mops->write_complete || !mops->state || + !mops->write_init || (!mops->write && !mops->write_sg) || + (mops->write && mops->write_sg)) { dev_err(dev, "Attempt to register without fpga_manager_ops\n"); return -EINVAL; } -- cgit v1.2.3