From 4fef056588f5219a9a59039e5dbe04c2e643dc2b Mon Sep 17 00:00:00 2001 From: Lucas Tanure Date: Thu, 29 Jun 2023 08:34:19 +0100 Subject: arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree The Khadas VIM4 uses the Amlogic A311D2 SoC, based on the Amlogic T7 SoC family, on a board with the same form factor as the VIM3 models. - 8GB LPDDR4X 2016MHz - 32GB eMMC 5.1 storage - 32MB SPI flash - 10/100/1000 Base-T Ethernet - AP6275S Wireless (802.11 a/b/g/n/ac/ax, BT5.1) - HDMI 2.1 video - HDMI Input - 1x USB 2.0 + 1x USB 3.0 ports - 1x USB-C (power) with USB 2.0 OTG - 3x LED's (1x red, 1x blue, 1x white) - 3x buttons (power, function, reset) - M2 socket with PCIe, USB, ADC & I2C - 40pin GPIO Header - 1x micro SD card slot Signed-off-by: Lucas Tanure Link: https://lore.kernel.org/r/20230629073419.207886-5-tanure@linux.com Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64/boot/dts/amlogic/Makefile') diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 6f61798a109f..91fa425116ea 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb +dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb -- cgit v1.2.3