From 6606bc9dee63ad8cda2cc310d2ad5992673a785a Mon Sep 17 00:00:00 2001 From: Baolin Wang Date: Thu, 17 Aug 2017 14:50:36 +0800 Subject: pinctrl: Add sleep related state to indicate sleep related configs In some scenarios, we should set some pins as input/output/pullup/pulldown when the specified system goes into deep sleep mode, then when the system goes into deep sleep mode, these pins will be set automatically by hardware. That means some pins are not controlled by any specific driver in the OS, but need to be controlled when entering sleep mode. Thus we introduce one sleep state config into pinconf-generic for users to configure. Signed-off-by: Baolin Wang Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 2 ++ drivers/pinctrl/pinconf-generic.c | 2 ++ include/linux/pinctrl/pinconf-generic.h | 2 ++ 3 files changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 62d0f33fa65e..4483cc31e531 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -268,6 +268,8 @@ output-enable - enable output on a pin without actively driving it (such as enabling an output buffer) output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level +sleep-hardware-state - indicate this is sleep related state which will be programmed + into the registers for the sleep state. slew-rate - set the slew rate For example: diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c index 4cf901c78130..8eaa25c3384f 100644 --- a/drivers/pinctrl/pinconf-generic.c +++ b/drivers/pinctrl/pinconf-generic.c @@ -47,6 +47,7 @@ static const struct pin_config_item conf_items[] = { PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled", NULL, false), PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true), PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true), + PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false), PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true), }; @@ -178,6 +179,7 @@ static const struct pinconf_generic_params dt_params[] = { { "output-high", PIN_CONFIG_OUTPUT, 1, }, { "output-low", PIN_CONFIG_OUTPUT, 0, }, { "power-source", PIN_CONFIG_POWER_SOURCE, 0 }, + { "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 }, { "slew-rate", PIN_CONFIG_SLEW_RATE, 0 }, }; diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index e91d1b6a260d..5d8bc7f21c2a 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -86,6 +86,7 @@ * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power * supplies, the argument to this parameter (on a custom format) tells * the driver which alternative power source to use. + * @PIN_CONFIG_SLEEP_HARDWARE_STATE: indicate this is sleep related state. * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to * this parameter (on a custom format) tells the driver which alternative * slew rate to use. @@ -114,6 +115,7 @@ enum pin_config_param { PIN_CONFIG_OUTPUT_ENABLE, PIN_CONFIG_OUTPUT, PIN_CONFIG_POWER_SOURCE, + PIN_CONFIG_SLEEP_HARDWARE_STATE, PIN_CONFIG_SLEW_RATE, PIN_CONFIG_END = 0x7F, PIN_CONFIG_MAX = 0xFF, -- cgit v1.2.3