summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2015-02-25ALSA: hda - Disable runtime PM for Panther Point againTakashi Iwai1-1/+1
This is essentially a partial revert of the commit [b1920c21102a: 'ALSA: hda - Enable runtime PM on Panther Point']. There was a bug report showing the HD-audio bus hang during runtime PM on HP Spectre XT. Reported-by: Dang Sananikone <dang.sananikone@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-24ALSA: hda: controller code - do not export static functionsJaroslav Kysela1-5/+0
It is a bad idea to export static functions. GCC for some platforms shows errors like: error: __ksymtab_azx_get_response causes a section type conflict Signed-off-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-23ALSA: pcm: Don't leave PREPARED state after drainingTakashi Iwai1-0/+2
When a PCM draining is performed to an empty stream that has been already in PREPARED state, the current code just ignores and leaves as it is, although the drain is supposed to set all such streams to SETUP state. This patch covers that overlooked case. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-23ALSA: fireworks/bebob/dice/oxfw: make it possible to shutdown safelyTakashi Sakamoto6-28/+15
A part of these drivers, especially BeBoB driver, are programmed to wait some events. Thus the drivers should not destroy any data in .remove() context. This commit moves some destructors from 'struct fw_driver.remove()' to 'struct snd_card.private_free()' to shutdown safely. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-23ALSA: fireworks/bebob/dice/oxfw: allow stream destructor after releasing runtimeTakashi Sakamoto4-21/+30
Currently stream destructor in each driver has a problem to be called in a context in which sound card object is released, because the destructors call amdtp_stream_pcm_abort() and touch PCM runtime data. The PCM runtime data is destroyed in application's context with snd_pcm_close(), on the other hand PCM substream data is destroyed after sound card object is released, in most case after all of ALSA character devices are released. When PCM runtime is destroyed and PCM substream is remained, amdtp_stream_pcm_abort() touches PCM runtime data and causes Null-pointer-dereference. This commit changes stream destructors and allows each driver to call it after releasing runtime. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-23ALSA: firewire-lib: remove reference countingTakashi Sakamoto1-2/+1
AMDTP helper functions increment/decrement reference counter for an instance of FireWire unit, while it's complicated for each driver to process error state. In previous commit, each driver has the role of reference counting. This commit removes this role from the helper function. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-23ALSA: fireworks/bebob/dice/oxfw: add reference-counting for FireWire unitTakashi Sakamoto4-4/+42
Fireworks and Dice drivers try to touch instances of FireWire unit after sound card object is released, while references to the unit is decremented in .remove(). When unplugging during streaming, sound card object is released after .remove(), thus Fireworks and Dice drivers causes GPF or Null-pointer-dereferencing to application processes because an instance of FireWire unit was already released. This commit adds reference-counting for FireWire unit in drivers to allow them to touch an instance of FireWire unit after .remove(). In most case, any operations after .remove() may be failed safely. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-23ALSA: hda - Add pin configs for ASUS mobo with IDT 92HD73XX codecTakashi Iwai1-1/+16
BIOS doesn't seem to set up pins for 5.1 and the SPDIF out, so we need to give explicitly here. Reported-and-tested-by: Misan Thropos <misanthropos@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-23ALSA: firewire-lib: fix an unexpected byte sequence for micro signTakashi Sakamoto1-1/+1
The sign for microsecond (U+0085, MICRO SIGN) was encoded to '0x c2 b5' by UTF-8 character encoding scheme. But the byte sequence was converted to '0x c3 82 c2 b5' in a previous commit. As a result, the byte sequence cannot represent microsecond sign in UTF-8 or ASCII. This may confuse developers. This commit replaces the sign to string expression with 'microseconds' to purge superfluous troubles. Fixes: 5c697e5b46ef("ALSA: firewire-lib: remove rx_blocks_for_midi quirk") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-21Merge tag 'sound-fix-3.20-rc1' of ↵Linus Torvalds10-11/+43
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a few small fix patches for 3.20-rc1: - Quirks for Denon and Lifecam USB-audio devices and HD-audio on HP laptops - A long-time regression fix for HDSP eMADI - Add missing DRAIN_TRIGGER flag set for ASoC intel-sst - Trivial fixes for sequencer core and HD-audio Tegra, a LINE6 cleanup" * tag 'sound-fix-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb: Fix support for Denon DA-300USB DAC (ID 154e:1003) ASoC: Intel: add SNDRV_PCM_INFO_DRAIN_TRIGGER flag ALSA: usb-audio: Don't attempt to get Lifecam HD-5000 sample rate ALSA: hda/tegra check correct return value from ioremap_resource ALSA: hdspm - Constrain periods to 2 on older cards ALSA: hda - enable mute led quirk for one more hp machine. ALSA: seq: potential out of bounds in do_control() ALSA: line6: Improve line6_read/write_data() interfaces
2015-02-18Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-1/+1
Pull dmaengine updates from Vinod Koul: "This update brings: - the big cleanup up by Maxime for device control and slave capabilities. This makes the API much cleaner. - new IMG MDC driver by Andrew - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with bunch of fixes on rcar drivers - odd fixes and updates spread over driver" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits) dmaengine: pl330: add DMA_PAUSE feature dmaengine: pl330: improve pl330_tx_status() function dmaengine: rcar-dmac: Disable channel 0 when using IOMMU dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR dmaengine: rcar-dmac: Fix spinlock issues in interrupt dmaenegine: edma: fix sparse warnings dmaengine: rcar-dmac: Fix uninitialized variable usage dmaengine: shdmac: extend PM methods dmaengine: shdmac: use SET_RUNTIME_PM_OPS() dmaengine: pl330: fix bug that cause start the same descs in cyclic dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers dmaengine: at_xdmac: simplify channel configuration stuff dmaengine: at_xdmac: introduce save_cc field dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel ioat: fail self-test if wait_for_completion times out dmaengine: dw: define DW_DMA_MAX_NR_MASTERS dmaengine: dw: amend description of dma_dev field dmatest: move src_off, dst_off, len inside loop ...
2015-02-17ALSA: usb: Fix support for Denon DA-300USB DAC (ID 154e:1003)Frank C Guenther1-0/+3
Fix problem where playback of Denon DA-300USB DAC sometimes does not start and leads to error messages like "clock source 41 is not valid, cannot use". Solution: Treat this device the same as other Denon/Marantz devices in sound/usb/quirks.c. Tested with both PCM and DSD formats. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93261 Signed-off-by: Frank C Guenther <bugzilla.frnkcg@spamgourmet.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17ASoC: Intel: add SNDRV_PCM_INFO_DRAIN_TRIGGER flagLibin Yang1-1/+2
Add SNDRV_PCM_INFO_DRAIN_TRIGGER in snd_pcm_hardware.info to call sst_hsw_stream_set_silence_start() when PCM draining. Signed-off-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-17ALSA: usb-audio: Don't attempt to get Lifecam HD-5000 sample rateJoe Turner3-0/+12
Adds a quirk to disable the check that the sample rate has been set correctly, as the Lifecam does not support getting the sample rate. This means that we don't need to wait for the USB timeout when attempting to get the sample rate. Waiting for the timeout causes problems in some applications, which give up on the device acquisition process before it has had time to complete, resulting in no sound. [minor tidy up by tiwai] Signed-off-by: Joe Turner <joe@oampo.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-14ALSA: hda/tegra check correct return value from ioremap_resourceEliot Blennerhassett1-2/+2
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-13ALSA: hdspm - Constrain periods to 2 on older cardsAdrian Knoth1-0/+6
RME RayDAT and AIO use a fixed buffer size of 16384 samples. With period sizes of 32-4096, this translates to 4-512 periods. The older RME cards have a variable buffer size but require exactly two periods. This patch enforces nperiods=2 on those cards. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Cc: <stable@vger.kernel.org> # 2.6.39+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-13ALSA: hda - enable mute led quirk for one more hp machine.Hui Wang1-0/+1
Otherwise, the mute led can't work at all. Tested-by: Taihsiang Ho <taihsiang.ho@canonical.com> Cc: <stable@vger.kernel.org> BugLink: https://bugs.launchpad.net/bugs/1410704 Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-12ALSA: seq: potential out of bounds in do_control()Dan Carpenter1-0/+3
Smatch complains that "control" is user specifigy and needs to be capped. The call tree to understand this warning is quite long. snd_seq_write() <-- get the event from the user snd_seq_client_enqueue_event() snd_seq_deliver_event() deliver_to_subscribers() snd_seq_deliver_single_event() snd_opl3_oss_event_input() snd_midi_process_event() do_control() Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-12ALSA: line6: Improve line6_read/write_data() interfacesChris Rorvick2-8/+14
The address cannot be negative so make it unsigned. Also, an unsigned int is always sufficient for the length, so no need to overdo it with a size_t. Finally, add in range checks to see if the values passed in actually fit where they are used. Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11Merge tag 'sound-3.20-rc1' of ↵Linus Torvalds421-4841/+12185
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "In this batch, you can find lots of cleanups through the whole subsystem, as our good New Year's resolution. Lots of LOCs and commits are about LINE6 driver that was promoted finally from staging tree, and as usual, there've been widely spread ASoC changes. Here some highlights: ALSA core changes - Embedding struct device into ALSA core structures - sequencer core cleanups / fixes - PCM msbits constraints cleanups / fixes - New SNDRV_PCM_TRIGGER_DRAIN command - PCM kerneldoc fixes, header cleanups - PCM code cleanups using more standard codes - Control notification ID fixes Driver cleanups - Cleanups of PCI PM callbacks - Timer helper usages cleanups - Simplification (e.g. argument reduction) of many driver codes HD-audio - Hotkey and LED support on HP laptops with Realtek codecs - Dock station support on HP laptops - Toshiba Satellite S50D fixup - Enhanced wallclock timestamp handling for HD-audio - Componentization to simplify the linkage between i915 and hd-audio drivers for Intel HDMI/DP USB-audio - Akai MPC Element support - Enhanced timestamp handling ASoC - Lots of refactoringin ASoC core, moving drivers to more data driven initialization and rationalizing a lot of DAPM usage - Much improved handling of CDCLK clocks on Samsung I2S controllers - Lots of driver specific cleanups and feature improvements - CODEC support for TI PCM514x and TLV320AIC3104 devices - Board support for Tegra systems with Realtek RT5677 - New driver for Maxim max98357a - More enhancements / fixes for Intel SST driver Others - Promotion of LINE6 driver from staging along with lots of rewrites and cleanups - DT support for old non-ASoC atmel driver - oxygen cleanups, XIO2001 init, Studio Evolution SE6x support - Emu8000 DRAM size detection fix on ISA(!!) AWE64 boards - A few more ak411x fixes for ice1724 boards" * tag 'sound-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (542 commits) ALSA: line6: toneport: Use explicit type for firmware version ALSA: line6: Use explicit type for serial number ALSA: line6: Return EIO if read/write not successful ALSA: line6: Return error if device not responding ALSA: line6: Add delay before reading status ASoC: Intel: Clean data after SST fw fetch ALSA: hda - Add docking station support for another HP machine ALSA: control: fix failure to return new numerical ID in 'replace' event data ALSA: usb: update trigger timestamp on first non-zero URB submitted ALSA: hda: read trigger_timestamp immediately after starting DMA ALSA: pcm: allow for trigger_tstamp snapshot in .trigger ALSA: pcm: don't override timestamp unconditionally ALSA: off by one bug in snd_riptide_joystick_probe() ASoC: rt5670: Set use_single_rw flag for regmap ASoC: rt286: Add rt288 codec support ASoC: max98357a: Fix build in !CONFIG_OF case ASoC: Intel: fix platform_no_drv_owner.cocci warnings ARM: dts: Switch Odroid X2/U2 to simple-audio-card ARM: dts: Exynos4 and Odroid X2/U3 sound device nodes update ALSA: control: fix failure to return numerical ID in 'add' event ...
2015-02-11ALSA: line6: toneport: Use explicit type for firmware versionChris Rorvick1-1/+1
The firmware version is a single byte so have the variable type agree. Since the address to this member is passed to the read function, using an int is not even portable. Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11ALSA: line6: Use explicit type for serial numberChris Rorvick4-5/+5
The serial number (aka ESN) is a 32-bit value. Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11ALSA: line6: Return EIO if read/write not successfulChris Rorvick1-2/+2
Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11ALSA: line6: Return error if device not respondingChris Rorvick1-6/+23
Put an upper bound on how long we will wait for the device to respond to a read/write request (i.e., 100 milliseconds) and return an error if this is reached. Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11ALSA: line6: Add delay before reading statusChris Rorvick1-0/+6
The device indicates the result of a read/write operation by making the status available on a subsequent request from the driver. This is not ready immediately, though, so the driver is currently slamming the device with hundreds of pointless requests before getting the expected response. Add a two millisecond delay before each attempt. This is approximately the behavior observed with version 4.2.7.1 of the Windows driver. Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11ASoC: Intel: Clean data after SST fw fetchLibin Yang3-0/+102
The BDW audio firmware DSP manages the DMA and the DMA cannot be stopped exactly at the end of the playback stream. This means stale samples may be played at PCM stop unless the driver copies silence to the subsequent periods. Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: 1) More iov_iter conversion work from Al Viro. [ The "crypto: switch af_alg_make_sg() to iov_iter" commit was wrong, and this pull actually adds an extra commit on top of the branch I'm pulling to fix that up, so that the pre-merge state is ok. - Linus ] 2) Various optimizations to the ipv4 forwarding information base trie lookup implementation. From Alexander Duyck. 3) Remove sock_iocb altogether, from CHristoph Hellwig. 4) Allow congestion control algorithm selection via routing metrics. From Daniel Borkmann. 5) Make ipv4 uncached route list per-cpu, from Eric Dumazet. 6) Handle rfs hash collisions more gracefully, also from Eric Dumazet. 7) Add xmit_more support to r8169, e1000, and e1000e drivers. From Florian Westphal. 8) Transparent Ethernet Bridging support for GRO, from Jesse Gross. 9) Add BPF packet actions to packet scheduler, from Jiri Pirko. 10) Add support for uniqu flow IDs to openvswitch, from Joe Stringer. 11) New NetCP ethernet driver, from Muralidharan Karicheri and Wingman Kwok. 12) More sanely handle out-of-window dupacks, which can result in serious ACK storms. From Neal Cardwell. 13) Various rhashtable bug fixes and enhancements, from Herbert Xu, Patrick McHardy, and Thomas Graf. 14) Support xmit_more in be2net, from Sathya Perla. 15) Group Policy extensions for vxlan, from Thomas Graf. 16) Remove Checksum Offload support for vxlan, from Tom Herbert. 17) Like ipv4, support lockless transmit over ipv6 UDP sockets. From Vlad Yasevich. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1494+1 commits) crypto: fix af_alg_make_sg() conversion to iov_iter ipv4: Namespecify TCP PMTU mechanism i40e: Fix for stats init function call in Rx setup tcp: don't include Fast Open option in SYN-ACK on pure SYN-data openvswitch: Only set TUNNEL_VXLAN_OPT if VXLAN-GBP metadata is set ipv6: Make __ipv6_select_ident static ipv6: Fix fragment id assignment on LE arches. bridge: Fix inability to add non-vlan fdb entry net: Mellanox: Delete unnecessary checks before the function call "vunmap" cxgb4: Add support in cxgb4 to get expansion rom version via ethtool ethtool: rename reserved1 memeber in ethtool_drvinfo for expansion ROM version net: dsa: Remove redundant phy_attach() IB/mlx4: Reset flow support for IB kernel ULPs IB/mlx4: Always use the correct port for mirrored multicast attachments net/bonding: Fix potential bad memory access during bonding events tipc: remove tipc_snprintf tipc: nl compat add noop and remove legacy nl framework tipc: convert legacy nl stats show to nl compat tipc: convert legacy nl net id get to nl compat tipc: convert legacy nl net id set to nl compat ...
2015-02-10Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: "Summary: - switch to asm-generic/futex.h - various cleanups - defconfig updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/defconfig: Enable Ethernet bridging m68k/defconfig: Enable Atari EtherNAT and EtherNEC Ethernet support m68k/defconfig: Enable automounting of devtmpfs at /dev m68k/defconfig: Enable early printk support m68k/defconfig: Enable test modules m68k/defconfig: Refresh defconfigs for v3.16-rc1--v3.19-rc2 m68k/atari: Remove obsolete IRQ_TYPE_* sound: dmasound_atari: Remove obsolete IRQ_TYPE_SLOW video: atafb: Remove obsolete IRQ_TYPE_PRIO parport: parport_atari: Remove obsolete IRQ_TYPE_SLOW net: atarilance: Remove obsolete IRQ_TYPE_PRIO m68k/atari: Remove obsolete keyboard_tasklet scheduling m68k/mac: Fix scsi_type for Mac LC and similar models m68k: Switch to asm-generic/futex.h m68k/mvme147: config.c - Remove unused functions m68k/atari: atakeyb.c - Remove some unused functions m68k/mvme16x: rtc - Don't use module_init in non-modular code
2015-02-10ALSA: hda - Add docking station support for another HP machineTienFu Chen1-0/+1
BugLink: https://bugs.launchpad.net/bugs/1412800 Signed-off-by: TienFu Chen <tienfu.chen@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-09ALSA: control: fix failure to return new numerical ID in 'replace' event dataTakashi Sakamoto1-0/+1
In 'replace' event data, numerical ID of control is always invalid. This commit fix this bug so as the event data has renewed numerical ID for control. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-09ALSA: usb: update trigger timestamp on first non-zero URB submittedPierre-Louis Bossart2-0/+11
The first URBs are submitted during the prepare stage. When .trigger is called, the ALSA core saves a trigger tstamp that doesn't correspond to the actual time when the samples are submitted. The trigger_tstamp is now updated when the first data are submitted to avoid any time offsets. A usb-specific trigger_tstamp_pending_update flag is used for now, at some point the flag would need to move to the ALSA core, USB is not the only interface where silent block transfers are programmed as part of the prepare stage, with actual data enabled when .trigger is called. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-09ALSA: hda: read trigger_timestamp immediately after starting DMAPierre-Louis Bossart1-0/+3
Make sure wallclock counter and trigger timestamp are read very close to each other for better alignment. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-09ALSA: pcm: allow for trigger_tstamp snapshot in .triggerPierre-Louis Bossart1-1/+3
Don't use generic snapshot of trigger_tstamp if low-level driver or hardware can get a more precise value for better audio/system time synchronization. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-09ALSA: pcm: don't override timestamp unconditionallyPierre-Louis Bossart1-1/+4
timestamp in RUNNING mode is already taken in update_hw_ptr routine, getting a new timestamp introduces offset between hw_ptr, audio_tstamp and system time Add else condition to read timestamp as fallback and only when enabled Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-09ALSA: off by one bug in snd_riptide_joystick_probe()Dan Carpenter1-8/+19
The problem here is that we check: if (dev >= SNDRV_CARDS) Then we increment "dev". if (!joystick_port[dev++]) Then we use it as an offset into a array with SNDRV_CARDS elements. if (!request_region(joystick_port[dev], 8, "Riptide gameport")) { This has 3 effects: 1) If you use the module option to specify the joystick port then it has to be shifted one space over. 2) The wrong error message will be printed on failure if you have over 32 cards. 3) Static checkers will correctly complain that are off by one. Fixes: db1005ec6ff8 ('ALSA: riptide - Fix joystick resource handling') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-09Merge tag 'asoc-v3.20-3' of ↵Takashi Iwai21-584/+694
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Final updates for v3.20 A few more updates for v3.20 that have accumilated over the second half of last week. One new (relatively simple) driver for the Maxim max98357a and some other driver specific fixes and enhancements. I did apply a few patches that haven't been in -next just now before sending this, all fixes except for one simple device ID addition patch.
2015-02-09Merge remote-tracking branches 'asoc/topic/wm8804', 'asoc/topic/wm8904', ↵Mark Brown10-11/+772
'asoc/topic/wm8960', 'asoc/topic/wm8988' and 'asoc/topic/xtfpga' into asoc-next
2015-02-09Merge remote-tracking branches 'asoc/topic/ts3a227e', 'asoc/topic/ts3a277e' ↵Mark Brown2-9/+32
and 'asoc/topic/txx9' into asoc-next
2015-02-09Merge remote-tracking branches 'asoc/topic/simple', 'asoc/topic/sta32x', ↵Mark Brown16-348/+1008
'asoc/topic/tdm-slot', 'asoc/topic/tegra' and 'asoc/topic/tlv320aic3x' into asoc-next
2015-02-09Merge remote-tracking branches 'asoc/topic/rt5670', 'asoc/topic/rt5677', ↵Mark Brown14-490/+234
'asoc/topic/rx51', 'asoc/topic/samsung' and 'asoc/topic/sh' into asoc-next
2015-02-09Merge remote-tracking branches 'asoc/topic/pxa', 'asoc/topic/rcar' and ↵Mark Brown18-381/+436
'asoc/topic/rt286' into asoc-next
2015-02-09Merge remote-tracking branches 'asoc/topic/mxs-saif' and 'asoc/topic/nuc900' ↵Mark Brown3-12/+5
into asoc-next
2015-02-09Merge remote-tracking branches 'asoc/topic/fsl-spdif', 'asoc/topic/imx', ↵Mark Brown27-425/+1033
'asoc/topic/intel', 'asoc/topic/jz4740' and 'asoc/topic/max98357a' into asoc-next
2015-02-09Merge remote-tracking branches 'asoc/topic/doc', 'asoc/topic/dwc', ↵Mark Brown10-70/+241
'asoc/topic/fsi', 'asoc/topic/fsl' and 'asoc/topic/fsl-asrc' into asoc-next
2015-02-09Merge remote-tracking branches 'asoc/topic/cs42l73', 'asoc/topic/dai' and ↵Mark Brown28-463/+211
'asoc/topic/davinci' into asoc-next
2015-02-09Merge remote-tracking branches 'asoc/topic/bt-sco', 'asoc/topic/cs35l32', ↵Mark Brown4-7/+7
'asoc/topic/cs42l52' and 'asoc/topic/cs42l56' into asoc-next
2015-02-09Merge remote-tracking branches 'asoc/topic/ad193x', 'asoc/topic/alc5632', ↵Mark Brown8-62/+81
'asoc/topic/atmel' and 'asoc/topic/au1x' into asoc-next
2015-02-09Merge remote-tracking branch 'asoc/topic/w-codec' into asoc-nextMark Brown52-223/+363
2015-02-09Merge remote-tracking branch 'asoc/topic/pcm512x' into asoc-nextMark Brown3-22/+1104
2015-02-09Merge remote-tracking branch 'asoc/topic/dmaengine' into asoc-nextMark Brown1-13/+2
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 02:38:04 +0000