summaryrefslogtreecommitdiff
path: root/sound/hda
AgeCommit message (Collapse)AuthorFilesLines
2018-09-17Merge tag 'asoc-v4.19-rc4' of ↵Takashi Iwai1-5/+10
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.19 This is the usual set of small fixes scatterd around various drivers, plus one fix for DAPM and a UAPI build fix. There's not a huge amount that stands out here relative to anything else.
2018-09-12sound: don't call skl_init_chip() to reset intel skl socYu Zhao1-3/+4
Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which 1) sets bus->chip_init to prevent multiple entrances before device is stopped; 2) enables interrupt. We shouldn't use it for the purpose of resetting device only because 1) when we really want to initialize device, we won't be able to do so; 2) we are ready to handle interrupt yet, and kernel crashes when interrupt comes in. Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset device properly. Fixes: 60767abcea3d ("ASoC: Intel: Skylake: Reset the controller in probe") Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-12sound: enable interrupt after dma buffer initializationYu Zhao1-2/+6
In snd_hdac_bus_init_chip(), we enable interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has been acquired and irq handler uses the dma buffer, kernel may crash when interrupt comes in. Fix the problem by postponing enabling irq after dma buffer initialization. And warn once on null dma buffer pointer during the initialization. Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ALSA: hda: Fix several mismatch for register mask and valueKeyon Jie1-15/+7
E.g. for snd_hdac_ext_link_clear_stream_id(), we should set (1 << stream) as mask, and 0 as value, here correct it and several similar mismatches. And, here also remove unreadable register_mask usage for those mask value updating. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-27ALSA: hda: Proper endian notations for BDL pointersTakashi Iwai1-2/+2
The BDL pointer used in snd_hdac_dsp_prepare() should be declared as __le32, as warned by sparse: sound/hda/hdac_stream.c:655:47: warning: incorrect type in argument 4 (different base types) sound/hda/hdac_stream.c:655:47: expected restricted __le32 [usertype] **bdlp sound/hda/hdac_stream.c:655:47: got unsigned int [usertype] **<noident> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-27ALSA: hda: Fix implicit PCM format type conversionTakashi Iwai1-1/+1
The PCM format type is defined with __bitwise, hence it can't be passed as integer but needs an explicit cast. In this patch, instead of the messy cast flood, define the format argument of snd_hdac_calc_stream_format() to be the proper snd_pcm_format_t type. This fixes sparse warnings like: sound/hda/hdac_device.c:760:38: warning: incorrect type in argument 1 (different base types) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-24ALSA: hda/i915: Allow delayed i915 audio component bindingTakashi Iwai1-2/+22
Currently HD-audio i915 audio binding doesn't support any delayed binding, and supposes that the i915 driver registers the component immediately. This has been OK, so far, but the work-in-progress change in i915 may introduce the asynchronous binding, which effectively delays the component registration. For addressing it, implement a completion to be synced with the master binding. The timeout is set to 10 seconds which should be long enough and hopefully be not too annoying if anyone boots up a debugging session with i915 KMS turned off. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-17ALSA: hda: Make audio component support more genericTakashi Iwai4-332/+354
This is the final step for more generic support of DRM audio component. The generic audio component code is now moved to its own file, and the symbols are renamed from snd_hac_i915_* to snd_hdac_acomp_*, respectively. The generic code is enabled via the new kconfig, CONFIG_SND_HDA_COMPONENT, while CONFIG_SND_HDA_I915 is kept as the super-class. Along with the split, three new callbacks are added to audio_ops: pin2port is for providing the conversion between the pin number and the widget id, and master_bind/master_unbin are called at binding / unbinding the master component, respectively. All these are optional, but used in i915 implementation and also other later implementations. A note about the new snd_hdac_acomp_init() function: there is a slight difference between this and the old snd_hdac_i915_init(). The latter (still) synchronizes with the master component binding, i.e. it assures that the relevant DRM component gets bound when it returns, or gives a negative error. Meanwhile the new function doesn't synchronize but just leaves as is. It's the responsibility by the caller's side to synchronize, or the caller may accept the asynchronous binding on the fly. v1->v2: Fix missing NULL check in master_bind/unbind Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-17ALSA: hda/i915: Associate audio component with devresTakashi Iwai1-13/+21
The HD-audio i915 binding code contains a single pointer, hdac_acomp, for allowing the access to audio component from the master bind/unbind callbacks. This was needed because the callbacks pass only the device pointer and we can't guarantee the object type assigned to the drvdata (which is free for each controller driver implementation). And this implementation will be a problem if we support multiple components for different DRM drivers, not only i915. As a solution, allocate the audio component object via devres and associate it with the given device, so that the component callbacks can refer to it via devres_find(). The removal of the object is still done half-manually via devres_destroy() to make the code consistent (although it may work without the explicit call). Also, the snd_hda_i915_register_notifier() had the reference to hdac_acomp as well. In this patch, the corresponding code is removed by passing hdac_bus object to the function, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-17drm/i915: Split audio component to a generic typeTakashi Iwai1-19/+21
For allowing other drivers to use the DRM audio component, rename the i915_audio_component_* with drm_audio_component_*, and split the generic part into drm_audio_component.h. The i915 specific stuff remains in struct i915_audio_component, which contains drm_audio_component as the base. The license of drm_audio_component.h is kept to MIT as same as the the original i915_component.h. This is a preliminary change for further development, and no functional changes by this patch itself, merely code-split and renames. v1->v2: Use SPDX for drm_audio_component.h, fix remaining i915 argument in drm_audio_component.h Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28ALSA: hdac: add extended ops in the hdac_busRakesh Ughreja1-1/+3
Add extended ops in the hdac_bus to allow calling the ASoC HDAC library ops to reuse the legacy HDA codec drivers with ASoC framework. Extended ops are used by the legacy codec drivers to call into hdac_hda library, in the subsequent patches.. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28ALSA: hdac: remove memory allocation from snd_hdac_ext_bus_device_initRakesh Ughreja1-6/+2
Remove memory allocation within snd_hdac_ext_bus_device_init, to make its behaviour identical to snd_hdac_bus_device_init. So that caller can allocate the parent data structure containing hdac_device. This API change helps in reusing the legacy HDA codec drivers with ASoC platform drivers. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28ALSA: hdac: ext: add wait for codec to respond after link resetRakesh Ughreja1-0/+9
As per HDA spec section 4.3 - Codec Discovery, the software shall wait for atleast 521usec for codec to respond after link reset. With the multi-link capability each link is turned ON/OFF individually. Link controller drives reset signal when it is turned ON. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28ALSA: hdac: Remove usage of struct hdac_ext_driver, use hdac_driver insteadRakesh Ughreja1-16/+14
This patch removes the hdac_ext_driver structure. The legacy and enhanced HDaudio capabilities can be handled in a backward-compatible way without separate definitions. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28ALSA: hdac: Remove usage of struct hdac_ext_bus and use hdac_bus insteadRakesh Ughreja3-102/+84
This patch removes the hdac_ext_bus structure. The legacy and enhanced HDaudio capabilities can be handled in a backward-compatible way without separate definitions. Follow-up patches in this series handle the driver definition. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28ALSA: hdac: Remove usage of struct hdac_ext_device and use hdac_device insteadRakesh Ughreja1-15/+10
This patch removes the hdac_ext_device structure. The legacy and enhanced HDaudio capabilities can be handled in a backward-compatible way without separate definitions. Follow-up patches in this series handle the bus and driver definitions. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-24ALSA: hda - Use a macro for snd_array iteration loopsTakashi Iwai1-2/+2
Introduce a new helper macro, snd_array_for_each(), to iterate for each snd_array element. It slightly improves the readability than lengthy open codes at each place. Along with it, add const prefix to some obvious places. There should be no functional changes by this. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-02-12ALSA: hda: Copying sync power state helper to coreAbhijeet Kumar1-0/+35
The current sync_power_state is local to hda code, moving it core so that other users apart from hda legacy can use it. The helper function ensures the actual state reaches the target state. Signed-off-by: Abhijeet Kumar <abhijeet.kumar@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-05Merge remote-tracking branches 'asoc/topic/dai-drv', 'asoc/topic/davinci', ↵Mark Brown1-1/+1
'asoc/topic/disconnect', 'asoc/topic/ep93xx' and 'asoc/topic/eukrea-tlv320' into asoc-next
2017-12-22ALSA: hda: Drop useless WARN_ON()Takashi Iwai1-1/+1
Since the commit 97cc2ed27e5a ("ALSA: hda - Fix yet another i915 pointer leftover in error path") cleared hdac_acomp pointer, the WARN_ON() non-NULL check in snd_hdac_i915_register_notifier() may give a false-positive warning, as the function gets called no matter whether the component is registered or not. For fixing it, let's get rid of the spurious WARN_ON(). Fixes: 97cc2ed27e5a ("ALSA: hda - Fix yet another i915 pointer leftover in error path") Cc: <stable@vger.kernel.org> Reported-by: Kouta Okamoto <kouta.okamoto@toshiba.co.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-12-01ASoC: hdac_hdmi: clean up hdac_device variable namesUghreja, Rakesh A1-1/+1
This patch renames all the variable instances of hdac_device with hdev to prepare the code base to remove the usage of hdac_ext_device data structures done in the following patches. Existing code uses hdev and hdac as variable names for hdac_device as well as hdac_ext_device, which creates confusion. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-17ALSA: hda: Fix too short HDMI/DP chmap reportingTakashi Iwai1-1/+1
We got a regression report about the HD-audio HDMI chmap, where some surround channels are reported as UNKNOWN. The git bisection pointed the culprit at the commit 9b3dc8aa3fb1 ("ALSA: hda - Register chmap obj as priv data instead of codec"). The story behind scene is like this: - While moving the code out of the legacy HDA to the HDA common place, the patch modifies the code to obtain the chmap array indirectly in a byte array, and it expands it to kctl value array. - At the latter operation, the size of the array is wrongly passed by sizeof() to the pointer. - It can be 4 on 32bit arch, thus too short for 6+ channels. (And that's the reason why it didn't hit other persons; it's 8 on 64bit arch, thus it's usually enough.) The code was further changed meanwhile, but the problem persisted. Let's fix it by correctly evaluating the array size. Fixes: 9b3dc8aa3fb1 ("ALSA: hda - Register chmap obj as priv data instead of codec") Reported-by: VDR User <user.vdr@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-13Merge tag 'asoc-v4.15' of ↵Takashi Iwai4-0/+4
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.15 The biggest thing this release has been the conversion of the AC98 bus to the driver model, that's been a long time coming so thanks to Robert Jarzmik for his dedication there. Due to there being some AC97 MFD there's a few fairly large changes in input and the MFD layer, mainly to the wm97xx driver. There's also some drivers/drm changes to support the new AMD Stoney platform, these are shared with the DRM subsystem and should be being merged via both. Within the subsystem the overwhelming bulk of the changes is in the Intel drivers which continue to need lots of cleanups and fixes, this release they've also gained support for their open source firmware. There's also some large changs in the core as Morimoto-san continues to mirror operations into the component level in preparation for conversion of drivers to that. - The AC97 bus has finally caught up with the driver model thanks to some dedicated and persistent work from Robert Jarzmik. - Continued work from Morimoto-san on moving us towards being able to use components for everything. - Lots of cleanups for the Intel platform code, including support for their open source audio firmware. - Support for scaling MCLK with sample rate in simple-card. - Support for AMD Stoney platform.
2017-11-13Merge branch 'for-next' into for-linusTakashi Iwai4-34/+61
Pull 4.15 updates to take over the previous urgent fixes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman4-0/+4
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-24ALSA: hda: Abort capability probe on invalid capabilityRakesh Ughreja1-1/+2
On reading wrong capability pointer values driver may crash, so whenever driver discovers unknown HDA capability, log it as error and stop traversing the link list further. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-19ALSA: hda: Avoid racy recreation of widget kobjectsTakashi Iwai3-33/+59
The refresh of HD-audio widget sysfs kobjects via snd_hdac_refresh_widget_sysfs() is slightly racy. The driver recreates the whole tree from scratch after deleting the whole. When CONFIG_DEBUG_KOBJECT_RELEASE option is used, kobject release doesn't happen immediately but delayed, while the re-creation of the same named kobject happens soon after invoking kobject_put(). This may end up with the conflicts of duplicated kobjects, as found in the bug report below. In this patch, we take another approach to refresh the tree: instead of recreating the whole tree, just add the new nodes and delete the non-existing nodes. Since the refresh happens only once at initialization, no longer race would happen. Along with the code change, merge snd_hdac_refresh_widget_sysfs() with the existing snd_hdac_refresh_widgets() with an additional bool flag for simplifying the code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197307 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-18ALSA: hda: Abort capability probe at invalid register readTakashi Iwai1-0/+5
The loop in snd_hdac_bus_parse_capabilities() may go to nirvana when it hits an invalid register value read: BUG: unable to handle kernel paging request at ffffad5dc41f3fff IP: pci_azx_readl+0x5/0x10 [snd_hda_intel] Call Trace: snd_hdac_bus_parse_capabilities+0x3c/0x1f0 [snd_hda_core] azx_probe_continue+0x7d5/0x940 [snd_hda_intel] ..... This happened on a new Intel machine, and we need to check the value and abort the loop accordingly. [Note: the fixes tag below indicates only the commit where this patch can be applied; the original problem was introduced even before that commit] Fixes: 6720b38420a0 ("ALSA: hda - move bus_parse_capabilities to core") Cc: <stable@vger.kernel.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-07-18ALSA: hda: constify pci_device_id.Arvind Yadav1-1/+1
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 2610 304 8 2922 b6a sound/hda/hdac_i915.o File size After adding 'const': text data bss dec hex filename 2674 240 8 2922 b6a sound/hda/hdac_i915.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-20ALSA: hda: Fix potential race at unregistration and unsol eventsTakashi Iwai2-0/+2
When the codec device is unregistered / freed, it may release the resource while being used in an unsolicited event like the jack detection work. This leads to use-after-free. The fix here is to unregister the device at first, i.e. removing the codec from the list, then flushing the pending works to assure that all unsol events are gone. After this point, we're free from accessing the codec via unsol events, thus can release the resources gracefully. The issue was spotted originally by Intel CI, but it couldn't be reproduced reliably by its nature. So let's hope this fix really addresses the whole issues. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196045 Reported-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-10ALSA: hda: Fix cpu lockup when stopping the cmd dmasJeeja KP1-0/+4
Using jiffies in hdac_wait_for_cmd_dmas() to determine when to time out when interrupts are off (snd_hdac_bus_stop_cmd_io()/spin_lock_irq()) causes hard lockup so unlock while waiting using jiffies. ---<-snip->--- <0>[ 1211.603046] NMI watchdog: Watchdog detected hard LOCKUP on cpu 3 <4>[ 1211.603047] Modules linked in: snd_hda_intel i915 vgem <4>[ 1211.603053] irq event stamp: 13366 <4>[ 1211.603053] hardirqs last enabled at (13365): ... <4>[ 1211.603059] Call Trace: <4>[ 1211.603059] ? delay_tsc+0x3d/0xc0 <4>[ 1211.603059] __delay+0xa/0x10 <4>[ 1211.603060] __const_udelay+0x31/0x40 <4>[ 1211.603060] snd_hdac_bus_stop_cmd_io+0x96/0xe0 [snd_hda_core] <4>[ 1211.603060] ? azx_dev_disconnect+0x20/0x20 [snd_hda_intel] <4>[ 1211.603061] snd_hdac_bus_stop_chip+0xb1/0x100 [snd_hda_core] <4>[ 1211.603061] azx_stop_chip+0x9/0x10 [snd_hda_codec] <4>[ 1211.603061] azx_suspend+0x72/0x220 [snd_hda_intel] <4>[ 1211.603061] pci_pm_suspend+0x71/0x140 <4>[ 1211.603062] dpm_run_callback+0x6f/0x330 <4>[ 1211.603062] ? pci_pm_freeze+0xe0/0xe0 <4>[ 1211.603062] __device_suspend+0xf9/0x370 <4>[ 1211.603062] ? dpm_watchdog_set+0x60/0x60 <4>[ 1211.603063] async_suspend+0x1a/0x90 <4>[ 1211.603063] async_run_entry_fn+0x34/0x160 <4>[ 1211.603063] process_one_work+0x1f4/0x6d0 <4>[ 1211.603063] ? process_one_work+0x16e/0x6d0 <4>[ 1211.603064] worker_thread+0x49/0x4a0 <4>[ 1211.603064] kthread+0x107/0x140 <4>[ 1211.603064] ? process_one_work+0x6d0/0x6d0 <4>[ 1211.603065] ? kthread_create_on_node+0x40/0x40 <4>[ 1211.603065] ret_from_fork+0x2e/0x40 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100419 Fixes: 38b19ed7f81ec ("ALSA: hda: fix to wait for RIRB & CORB DMA to set") Reported-by: Marta Lofstedt <marta.lofstedt@intel.com> Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> CC: stable <stable@vger.kernel.org> # 4.7 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-02Merge tag 'asoc-v4.12' of ↵Takashi Iwai1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.12 A quiet release for the core, but lots of new drivers this time around: - A new, generalized, API for hooking up jacks which makes it easier to write generic machine drivers for simple cases. - Continuing fixes for issues with the x86 CPU drivers. - New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132, HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with DA7213
2017-04-07ALSA: hda - add more ML register definitionsLibin Yang1-3/+3
This patch refines the definition of AZX_MLCTL_SPA and AZX_MLCTL_CPA and add more definitions of ML registers Signed-off-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-03ALSA: hda - Avoid tricky macrosTakashi Iwai2-3/+3
The macros _snd_hdac_chip_read() and *_write() expand to different types (b,w,l) per their argument. They were thought to be used only internally for other snd_hdac_chip_*() macros, but in some situations we need to call these directly, and they are way too ugly. Instead of saving a few lines, we just write these macros explicitly with the types, so that they can be used in a saner way. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-29Merge branch 'topic/hda' of ↵Mark Brown1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2017-03-29ALSA: hda: Fix LLCH register readB, Jayachandran1-1/+1
LLCH is a 16 bit register. Use readw instead of readl API. Signed-off-by: B, Jayachandran <jayachandran.b@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-24Merge tag 'v4.10-rc1' into asoc-intelMark Brown2-9/+15
Linux 4.10-rc1
2017-01-06ALSA: hda: check stream decoupled register stateJeeja KP1-6/+9
Check stream decoupled register value with requested value before decoupling/coupling the stream. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner1-3/+3
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-10-25Merge tag 'drm-intel-next-2016-10-24' of ↵Dave Airlie1-6/+12
git://anongit.freedesktop.org/drm-intel into drm-next - first slice of the gvt device model (Zhenyu et al) - compression support for gpu error states (Chris) - sunset clause on gpu errors resulting in dmesg noise telling users how to report them - .rodata diet from Tvrtko - switch over lots of macros to only take dev_priv (Tvrtko) - underrun suppression for dp link training (Ville) - lspcon (hmdi 2.0 on skl/bxt) support from Shashank Sharma, polish from Jani - gen9 wm fixes from Paulo&Lyude - updated ddi programming for kbl (Rodrigo) - respect alternate aux/ddc pins (from vbt) for all ddi ports (Ville) * tag 'drm-intel-next-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (227 commits) drm/i915: Update DRIVER_DATE to 20161024 drm/i915: Stop setting SNB min-freq-table 0 on powersave setup drm/i915/dp: add lane_count check in intel_dp_check_link_status drm/i915: Fix whitespace issues drm/i915: Clean up DDI DDC/AUX CH sanitation drm/i915: Respect alternate_ddc_pin for all DDI ports drm/i915: Respect alternate_aux_channel for all DDI ports drm/i915/gen9: Remove WaEnableYV12BugFixInHalfSliceChicken7 drm/i915: KBL - Recommended buffer translation programming for DisplayPort drm/i915: Move down skl/kbl ddi iboost and n_edp_entires fixup drm/i915: Add a sunset clause to GPU hang logging drm/i915: Stop reporting error details in dmesg as well as the error-state drm/i915/gvt: do not ignore return value of create_scratch_page drm/i915/gvt: fix spare warnings on odd constant _Bool cast drm/i915/gvt: mark symbols static where possible drm/i915/gvt: fix sparse warnings on different address spaces drm/i915/gvt: properly access enabled intel_engine_cs drm/i915/gvt: Remove defunct vmap_batch() drm/i915/gvt: Use common mapping routines for shadow_bb object drm/i915/gvt: Use common mapping routines for indirect_ctx object ...
2016-09-22drm/i915/dp: DP audio API changes for MSTPandiyan, Dhinakaran1-6/+12
DP MST provides the capability to send multiple video and audio streams through a single port. This requires the API's between i915 and audio drivers to distinguish between multiple audio capable displays that can be connected to a port. Currently only the port identity is shared in the APIs. This patch adds support for MST with an additional parameter 'int pipe'. The existing parameter 'port' does not change it's meaning. pipe = MST : display pipe that the stream originates from Non-MST : -1 Affected APIs: struct i915_audio_component_ops - int (*sync_audio_rate)(struct device *, int port, int rate); + int (*sync_audio_rate)(struct device *, int port, int pipe, + int rate); - int (*get_eld)(struct device *, int port, bool *enabled, - unsigned char *buf, int max_bytes); + int (*get_eld)(struct device *, int port, int pipe, + bool *enabled, unsigned char *buf, int max_bytes); struct i915_audio_component_audio_ops - void (*pin_eld_notify)(void *audio_ptr, int port); + void (*pin_eld_notify)(void *audio_ptr, int port, int pipe); This patch makes dummy changes in the audio drivers (thanks Libin) for build to succeed. The audio side drivers will send the right 'pipe' values for MST in patches that will follow. v2: Renamed the new API parameter from 'dev_id' to 'pipe'. (Jim, Ville) Included Asoc driver API compatibility changes from Jeeja. Added WARN_ON() for invalid pipe in get_saved_encoder(). (Takashi) Added comment for av_enc_map[] definition. (Takashi) v3: Fixed logic error introduced while renaming 'dev_id' as 'pipe' (Ville) Renamed get_saved_encoder() to get_saved_enc() to reduce line length v4: Rebased. Parameter check for pipe < -1 values in get_saved_enc() (Ville) Switched to for_each_pipe() in get_saved_enc() (Ville) Renamed 'pipe' to 'dev_id' in audio side code (Takashi) v5: Included a comment for the dev_id arg. (Libin) Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1474488168-2343-1-git-send-email-dhinakaran.pandiyan@intel.com
2016-09-16ALSA: hdac: add missing \n to end of dev_err messagesColin Ian King1-5/+5
Trival fix, some dev_err messages are missing a \n, so add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-09ALSA - Ext hda: remove bus_parse_capabilitiesVinod Koul1-75/+0
Remove the unused one as we have moved it up to hdac core. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-09ALSA: convert users to core bus_parse_capabilitiesVinod Koul2-31/+31
Now that we have the bus parse capabilities moved to core, we need to convert users. The SKL driver and HDA extended lib needs to converted in single patch, otherwise we regress on the functionality. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-09ALSA: hda - move bus_parse_capabilities to coreVinod Koul1-0/+75
HDA capability introduced recently are move to hdac core so that it can be used by legacy driver as well. Also move the capability pointers up to hdac_bus object. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-03ALSA: hda: Fix krealloc() with __GFP_ZERO usageTakashi Iwai1-1/+3
krealloc() doesn't work always properly with __GFP_ZERO flag as expected. For clearing the reallocated area, we need to clear explicitly instead. Reported-by: Joe Perches <joe@perches.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-07-25Merge branch 'for-next' into for-linusTakashi Iwai1-3/+25
Merged 4.8 changes.
2016-06-17ALSA: hdac_regmap - fix the register access for runtime PMJaroslav Kysela1-2/+2
Call path: 1) snd_hdac_power_up_pm() 2) snd_hdac_power_up() 3) pm_runtime_get_sync() 4) __pm_runtime_resume() 5) rpm_resume() The rpm_resume() returns 1 when the device is already active. Because the return value is unmodified, the hdac regmap read/write functions should allow this value for the retry I/O operation, too. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-16ALSA: hda: fix some klockwork scan warningsLibin Yang1-3/+25
This patch fixes some warnings from klockwork. These warnings are not the real issues. The patch adds the sanity check. Signed-off-by: Libin Yang <libin.yang@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-16Merge tag 'asoc-v4.7' of ↵Takashi Iwai3-0/+79
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.7 The updates this time around are almost all driver code: - Further slow progress on the topology code. - Substantial updates and improvements for the da7219, es8328, fsl-ssi Intel and rcar drivers.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 18:16:04 +0000