summaryrefslogtreecommitdiff
path: root/net/sunrpc/xdr.c
AgeCommit message (Collapse)AuthorFilesLines
2020-04-27SUNRPC: Revert 241b1f419f0e ("SUNRPC: Remove xdr_buf_trim()")Chuck Lever1-0/+41
I've noticed that when krb5i or krb5p security is in use, retransmitted requests are missing the server's duplicate reply cache. The computed checksum on the retransmitted request does not match the cached checksum, resulting in the server performing the retransmitted request again instead of returning the cached reply. The assumptions made when removing xdr_buf_trim() were not correct. In the send paths, the upper layer has already set the segment lengths correctly, and shorting the buffer's content is simply a matter of reducing buf->len. xdr_buf_trim() is the right answer in the receive/unwrap path on both the client and the server. The buffer segment lengths have to be shortened one-by-one. On the server side in particular, head.iov_len needs to be updated correctly to enable nfsd_cache_csum() to work correctly. The simple buf->len computation doesn't do that, and that results in checksumming stale data in the buffer. The problem isn't noticed until there's significant instability of the RPC transport. At that point, the reliability of retransmit detection on the server becomes crucial. Fixes: 241b1f419f0e ("SUNRPC: Remove xdr_buf_trim()") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-03-16SUNRPC: Remove xdr_buf_read_mic()Chuck Lever1-55/+0
Clean up: this function is no longer used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-01-15SUNRPC: constify copied structureJulia Lawall1-1/+1
The empty_iov structure is only copied into another structure, so make it const. The opportunity for this change was found using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-11-18SUNRPC: Fix another issue with MIC buffer spaceChuck Lever1-6/+5
xdr_shrink_pagelen() BUG's when @len is larger than buf->page_len. This can happen when xdr_buf_read_mic() is given an xdr_buf with a small page array (like, only a few bytes). Instead, just cap the number of bytes that xdr_shrink_pagelen() will move. Fixes: 5f1bc39979d ("SUNRPC: Fix buffer handling of GSS MIC ... ") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-09-20SUNRPC: Rename xdr_buf_read_netobj to xdr_buf_read_micBenjamin Coddington1-22/+30
Let the name reflect the single use. The function now assumes the GSS MIC is the last object in the buffer. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-09-20SUNRPC: Fix buffer handling of GSS MIC without slackBenjamin Coddington1-9/+18
The GSS Message Integrity Check data for krb5i may lie partially in the XDR reply buffer's pages and tail. If so, we try to copy the entire MIC into free space in the tail. But as the estimations of the slack space required for authentication and verification have improved there may be less free space in the tail to complete this copy -- see commit 2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing reply buffer size"). In fact, there may only be room in the tail for a single copy of the MIC, and not part of the MIC and then another complete copy. The real world failure reported is that `ls` of a directory on NFS may sometimes return -EIO, which can be traced back to xdr_buf_read_netobj() failing to find available free space in the tail to copy the MIC. Fix this by checking for the case of the MIC crossing the boundaries of head, pages, and tail. If so, shift the buffer until the MIC is contained completely within the pages or tail. This allows the remainder of the function to create a sub buffer that directly address the complete MIC. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Cc: stable@vger.kernel.org # v5.1 Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-08-20SUNRPC: Inline xdr_commit_encodeChuck Lever1-1/+1
Micro-optimization: For xdr_commit_encode call sites in net/sunrpc/xdr.c, eliminate the extra calling sequence. On my client, this change saves about a microsecond for every 30 calls to xdr_reserve_space(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14NFS: Account for XDR pad of buf->pagesChuck Lever1-0/+2
Certain NFS results (eg. READLINK) might expect a data payload that is not an exact multiple of 4 bytes. In this case, XDR encoding is required to pad that payload so its length on the wire is a multiple of 4 bytes. The constants that define the maximum size of each NFS result do not appear to account for this extra word. In each case where the data payload is to be received into pages: - 1 word is added to the size of the receive buffer allocated by call_allocate - rpc_inline_rcv_pages subtracts 1 word from @hdrsize so that the extra buffer space falls into the rcv_buf's tail iovec - If buf->pagelen is word-aligned, an XDR pad is not needed and is thus removed from the tail Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14SUNRPC: Introduce rpc_prepare_reply_pages()Chuck Lever1-0/+9
prepare_reply_buffer() and its NFSv4 equivalents expose the details of the RPC header and the auth slack values to upper layer consumers, creating a layering violation, and duplicating code. Remedy these issues by adding a new RPC client API that hides those details from upper layers in a common helper function. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14SUNRPC: Remove xdr_buf_trim()Chuck Lever1-41/+0
The key action of xdr_buf_trim() is that it shortens buf->len, the length of the xdr_buf's content. The other actions -- shortening the head, pages, and tail components -- are actually not necessary. In particular, changing the size of those components can corrupt the RPC message contained in the buffer. This is an accident waiting to happen rather than a current bug, as far as we know. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13SUNRPC: Add trace event that reports reply page vector alignmentChuck Lever1-6/+27
We don't want READ payloads that are partially in the head iovec and in the page buffer because this requires pull-up, which can be expensive. The NFS/RPC client tries hard to predict the size of the head iovec so that the incoming READ data payload lands only in the page vector, but it doesn't always get it right. To help diagnose such problems, add a trace point in the logic that decodes READ-like operations that reports whether pull-up is being done. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13SUNRPC: Add XDR overflow trace eventChuck Lever1-7/+17
This can help field troubleshooting without needing the overhead of a full network capture (ie, tcpdump). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13SUNRPC: Add xdr_stream::rqst fieldChuck Lever1-3/+9
Having access to the controlling rpc_rqst means a trace point in the XDR code can report: - the XID - the task ID and client ID - the p_name of RPC being processed Subsequent patches will introduce such trace points. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-11-08SUNRPC: drop pointless static qualifier in xdr_get_next_encode_buffer()YueHaibing1-1/+1
There is no need to have the '__be32 *p' variable static since new value always be assigned before use it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-11-05sunrpc: correct the computation for page_ptr when truncatingFrank Sorenson1-3/+2
When truncating the encode buffer, the page_ptr is getting advanced, causing the next page to be skipped while encoding. The page is still included in the response, so the response contains a page of bogus data. We need to adjust the page_ptr backwards to ensure we encode the next page into the correct place. We saw this triggered when concurrent directory modifications caused nfsd4_encode_direct_fattr() to return nfserr_noent, and the resulting call to xdr_truncate_encode() corrupted the READDIR reply. Signed-off-by: Frank Sorenson <sorenson@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-09-30SUNRPC: Add a bvec array to struct xdr_buf for use with iovec_iter()Trond Myklebust1-0/+34
Add a bvec array to struct xdr_buf, and have the client allocate it when we need to receive data into pages. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-04-10SUNRPC: Add helpers for decoding opaque and string typesTrond Myklebust1-0/+82
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-04-25sunrpc: Fix xdr_init_decode_pages() documenting commentChuck Lever1-1/+1
Clean up. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-02-21SUNRPC: Add a helper function xdr_stream_decode_string_dup()Trond Myklebust1-0/+34
Create a helper function that decodes a xdr string object, allocates a memory buffer and then store it as a NUL terminated string. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-22SUNRPC: Fix setting of buffer length in xdr_set_next_buffer()Trond Myklebust1-2/+2
Use xdr->nwords to tell us how much buffer remains. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-22SUNRPC: Fix corruption of xdr->nwords in xdr_copy_to_scratchTrond Myklebust1-2/+5
When we copy the first part of the data, we need to ensure that value of xdr->nwords is updated as well. Do so by calling __xdr_inline_decode() Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-09SUNRPC: init xdr_stream for zero iov_len, page_lenBenjamin Coddington1-0/+2
An xdr_buf with head[0].iov_len = 0 and page_len = 0 will cause xdr_init_decode() to incorrectly setup the xdr_stream. Specifically, xdr->end is never initialized. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-04-04mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usageKirill A. Shutemov1-1/+1
Mostly direct substitution with occasional adjustment or removing outdated comments. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-24/+24
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-07rpc: fix xdr_truncate_encode to handle buffer ending on page boundaryJ. Bruce Fields1-3/+3
A struct xdr_stream at a page boundary might point to the end of one page or the beginning of the next, but xdr_truncate_encode isn't prepared to handle the former. This can cause corruption of NFSv4 READDIR replies in the case that a readdir entry that would have exceeded the client's dircount/maxcount limit would have ended exactly on a 4k page boundary. You're more likely to hit this case on large directories. Other xdr_truncate_encode callers are probably also affected. Reported-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Fixes: 3e19ce762b53 "rpc: xdr_truncate_encode" Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-10-23rpc: change comments to assertionsJ. Bruce Fields1-2/+3
Reported-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-10-23RPC: remove unneeded checks from xdr_truncate_encode()J. Bruce Fields1-2/+2
Thanks to Andrea Arcangeli for pointing out these checks are obviously unnecessary given the preceding calculations. Reported-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-07-18SUNRPC: xdr_get_next_encode_buffer should be declared staticTrond Myklebust1-1/+2
Quell another sparse warning. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-06-06nfsd4: simplify server xdr->next_page useJ. Bruce Fields1-4/+5
The rpc code makes available to the NFS server an array of pages to encod into. The server represents its reply as an xdr buf, with the head pointing into the first page in that array, the pages ** array starting just after that, and the tail (if any) sharing any leftover space in the page used by the head. While encoding, we use xdr_stream->page_ptr to keep track of which page we're currently using. Currently we set xdr_stream->page_ptr to buf->pages, which makes the head a weird exception to the rule that page_ptr always points to the page we're currently encoding into. So, instead set it to buf->pages - 1 (the page actually containing the head), and remove the need for a little unintuitive logic in xdr_get_next_encode_buffer() and xdr_truncate_encode. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-30rpc: define xdr_restrict_buflenJ. Bruce Fields1-0/+29
With this xdr_reserve_space can help us enforce various limits. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-30nfsd4: allow encoding across page boundariesJ. Bruce Fields1-2/+76
After this we can handle for example getattr of very large ACLs. Read, readdir, readlink are still special cases with their own limits. Also we can't handle a new operation starting close to the end of a page. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-30rpc: xdr_truncate_encodeJ. Bruce Fields1-0/+66
This will be used in the server side in a few cases: - when certain operations (read, readdir, readlink) fail after encoding a partial response. - when we run out of space after encoding a partial response. - in readlink, where we initially reserve PAGE_SIZE bytes for data, then truncate to the actual size. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-03-28rpc: Allow xdr_buf_subsegment to operate in-placeJ. Bruce Fields1-6/+16
Allow xdr_buf_subsegment(&buf, &buf, base, len) to modify an xdr_buf in-place. Also, none of the callers need the iov_base of head or tail to be zeroed out. Also add documentation. (As it turns out, I'm not really using this new guarantee, but it seems a simple way to make this function a bit more robust.) Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-08-28SUNRPC: Fix memory corruption issue on 32-bit highmem systemsTrond Myklebust1-3/+6
Some architectures, such as ARM-32 do not return the same base address when you call kmap_atomic() twice on the same page. This causes problems for the memmove() call in the XDR helper routine "_shift_data_right_pages()", since it defeats the detection of overlapping memory ranges, and has been seen to corrupt memory. The fix is to distinguish between the case where we're doing an inter-page copy or not. In the former case of we know that the memory ranges cannot possibly overlap, so we can additionally micro-optimise by replacing memmove() with memcpy(). Reported-by: Mark Young <MYoung@nvidia.com> Reported-by: Matt Craighead <mcraighead@nvidia.com> Cc: Bruce Fields <bfields@fieldses.org> Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by: Matt Craighead <mcraighead@nvidia.com>
2013-02-08sunrpc: trim off trailing checksum before returning decrypted or integrity ↵Jeff Layton1-0/+41
authenticated buffer When GSSAPI integrity signatures are in use, or when we're using GSSAPI privacy with the v2 token format, there is a trailing checksum on the xdr_buf that is returned. It's checked during the authentication stage, and afterward nothing cares about it. Ordinarily, it's not a problem since the XDR code generally ignores it, but it will be when we try to compute a checksum over the buffer to help prevent XID collisions in the duplicate reply cache. Fix the code to trim off the checksums after verifying them. Note that in unwrap_integ_data, we must avoid trying to reverify the checksum if the request was deferred since it will no longer be present when it's revisited. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-11-04SUNRPC: remove BUG_ON in xdr_shrink_bufheadWeston Andros Adamson1-1/+4
Replace bounds checking BUG_ON() with a WARN_ON_ONCE() and resetting the requested len to the max. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-09-28SUNRPC: Optimise away unnecessary data moves in xdr_align_pagesTrond Myklebust1-10/+13
We only have to call xdr_shrink_pagelen() if the remaining RPC message does not fit in the page buffer length that we supplied to xdr_align_pages(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-09-26SUNRPC: Fix the return value of xdr_align_pages()Trond Myklebust1-0/+2
The callers of xdr_align_pages() expect it to return the number of bytes of actual XDR data remaining in the pages. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-30Merge tag 'nfs-for-3.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds1-58/+69
Pull NFS client updates from Trond Myklebust: "Features include: - More preparatory patches for modularising NFSv2/v3/v4. Split out the various NFSv2/v3/v4-specific code into separate files - More preparation for the NFSv4 migration code - Ensure that OPEN(O_CREATE) observes the pNFS mds threshold parameters - pNFS fast failover when the data servers are down - Various cleanups and debugging patches" * tag 'nfs-for-3.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (67 commits) nfs: fix fl_type tests in NFSv4 code NFS: fix pnfs regression with directio writes NFS: fix pnfs regression with directio reads sunrpc: clnt: Add missing braces nfs: fix stub return type warnings NFS: exit_nfs_v4() shouldn't be an __exit function SUNRPC: Add a missing spin_unlock to gss_mech_list_pseudoflavors NFS: Split out NFS v4 client functions NFS: Split out the NFS v4 filesystem types NFS: Create a single nfs_clone_super() function NFS: Split out NFS v4 server creating code NFS: Initialize the NFS v4 client from init_nfs_v4() NFS: Move the v4 getroot code to nfs4getroot.c NFS: Split out NFS v4 file operations NFS: Initialize v4 sysctls from nfs_init_v4() NFS: Create an init_nfs_v4() function NFS: Split out NFS v4 inode operations NFS: Split out NFS v3 inode operations NFS: Split out NFS v2 inode operations NFS: Clean up nfs4_proc_setclientid() and friends ...
2012-07-10net: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings1-5/+7
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28SUNRPC: Remove unused function xdr_encode_pagesTrond Myklebust1-28/+0
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28SUNRPC: Clean up xdr_enter_pageTrond Myklebust1-3/+3
Use the xdr_align_pages() helper Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28SUNRPC: Clean up xdr_read_pagesTrond Myklebust1-14/+26
Move the page alignment code into a separate helper. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28SUNRPC: Simplify the end-of-buffer calculation in xdr_read_pagesTrond Myklebust1-8/+7
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28SUNRPC: Remove open coded stream position calculation in xdr_read_pagesTrond Myklebust1-3/+3
Use xdr_stream_pos() instead. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28SUNRPC: Add the helper xdr_stream_posTrond Myklebust1-0/+10
Add a helper to report the current offset from the start of the xdr_stream. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28SUNRPC: xdr_read_pages should return the amount of XDR encoded page dataTrond Myklebust1-3/+6
Callers of xdr_read_pages() will want to know exactly how much XDR data is encoded in the pages after the data realignment. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28SUNRPC: Don't decode beyond the end of the RPC reply messageTrond Myklebust1-7/+21
Now that xdr_inline_decode() will automatically cross into the page buffers, we need to ensure that it doesn't exceed the total reply message length. This patch sets up a counter that tracks the number of words remaining in the reply message, and ensures that xdr_inline_decode, xdr_read_pages and xdr_enter_page respect the end of message boundary. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-28SUNRPC: Clean up xdr_set_iov()Trond Myklebust1-7/+7
Remove the 'p' argument, since that is only ever set by xdr_init_decode. Add sanity checking of 'p' inside xdr_init_decode itself. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 06:20:53 +0000