summaryrefslogtreecommitdiff
path: root/net/sunrpc/clnt.c
AgeCommit message (Collapse)AuthorFilesLines
2021-07-08sunrpc: remove an offlined xprt using sysfsOlga Kornievskaia1-0/+24
Once a transport has been put offline, this transport can be also removed from the list of transports. Any tasks that have been stuck on this transport would find the next available active transport and be re-tried. This transport would be removed from the xprt_switch list and freed. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-07-08SUNRPC mark the first transportOlga Kornievskaia1-0/+1
When an RPC client gets created it's first transport is special and should be marked a main transport. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-07-08sunrpc: add a symlink from rpc-client directory to the xprt_switchOlga Kornievskaia1-1/+1
An rpc client uses a transport switch and one ore more transports associated with that switch. Since transports are shared among rpc clients, create a symlink into the xprt_switch directory instead of duplicating entries under each rpc client. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-07-08sunrpc: Create per-rpc_clnt sysfs kobjectsOlga Kornievskaia1-0/+5
These will eventually have files placed under them for sysfs operations. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-05-20SUNRPC in case of backlog, hand free slots directly to waiting taskNeilBrown1-7/+0
If sunrpc.tcp_max_slot_table_entries is small and there are tasks on the backlog queue, then when a request completes it is freed and the first task on the queue is woken. The expectation is that it will wake and claim that request. However if it was a sync task and the waiting process was killed at just that moment, it will wake and NOT claim the request. As long as TASK_CONGESTED remains set, requests can only be claimed by tasks woken from the backlog, and they are woken only as requests are freed, so when a task doesn't claim a request, no other task can ever get that request until TASK_CONGESTED is cleared. Each time this happens the number of available requests is decreased by one. With a sufficiently high workload and sufficiently low setting of max_slot (16 in the case where this was seen), TASK_CONGESTED can remain set for an extended period, and the above scenario (of a process being killed just as its task was woken) can repeat until no requests can be allocated. Then traffic stops. This patch addresses the problem by introducing a positive handover of a request from a completing task to a backlog task - the request is never freed when there is a backlog. When a task is woken it might not already have a request attached in which case it is *not* freed (as with current code) but is initialised (if needed) and used. If it isn't used it will eventually be freed by rpc_exit_task(). xprt_release() is enhanced to be able to correctly release an uninitialised request. Fixes: ba60eb25ff6b ("SUNRPC: Fix a livelock problem in the xprt->backlog queue") Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-05-01sunrpc: Fix misplaced barrier in call_decodeBaptiste Lepers1-6/+5
Fix a misplaced barrier in call_decode. The struct rpc_rqst is modified as follows by xprt_complete_rqst: req->rq_private_buf.len = copied; /* Ensure all writes are done before we update */ /* req->rq_reply_bytes_recvd */ smp_wmb(); req->rq_reply_bytes_recvd = copied; And currently read as follows by call_decode: smp_rmb(); // misplaced if (!req->rq_reply_bytes_recvd) goto out; req->rq_rcv_buf.len = req->rq_private_buf.len; This patch places the smp_rmb after the if to ensure that rq_reply_bytes_recvd and rq_private_buf.len are read in order. Fixes: 9ba828861c56a ("SUNRPC: Don't try to parse incomplete RPC messages") Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-04-14SUNRPC: Move fault injection call sitesChuck Lever1-1/+0
I've hit some crashes that occur in the xprt_rdma_inject_disconnect path. It appears that, for some provides, rdma_disconnect() can take so long that the transport can disconnect and release its hardware resources while rdma_disconnect() is still running, resulting in a UAF in the provider. The transport's fault injection method may depend on the stability of transport data structures. That means it needs to be invoked only from contexts that hold the transport write lock. Fixes: 4a0682583988 ("SUNRPC: Transport fault injection") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-02SUNRPC: Clean up the handling of page padding in rpc_prepare_reply_pages()Trond Myklebust1-4/+1
rpc_prepare_reply_pages() currently expects the 'hdrsize' argument to contain the length of the data that we expect to want placed in the head kvec plus a count of 1 word of padding that is placed after the page data. This is very confusing when trying to read the code, and sometimes leads to callers adding an arbitrary value of '1' just in order to satisfy the requirement (whether or not the page data actually needs such padding). This patch aims to clarify the code by changing the 'hdrsize' argument to remove that 1 word of padding. This means we need to subtract the padding from all the existing callers. Fixes: 02ef04e432ba ("NFS: Account for XDR pad of buf->pages") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-09-21SUNRPC: Clean up call_bind_status() observabilityChuck Lever1-14/+6
Time to remove dprintk call sites in here. Regarding the rpc_bind_status tracepoint: It's friendlier to administrators if they don't have to look up the error code to figure out what went wrong. Replace trace_rpc_bind_status with a set of tracepoints that report more specifically what the problem was, and what RPC program/version was being queried. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Remove dprintk call site in call_decodeChuck Lever1-2/+0
Clean up. When enabled, this dprintk adds a line in /var/log/messages after every RPC that reports the task ID (no connection to on the wire XID values) and the RPC's result (no connection to the program, operation, or the arguments and results). Thus it's value is pretty low. Let's remove it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Trace call_refresh eventsChuck Lever1-6/+3
Clean up: Replace dprintk call sites. Note that rpc_call_rpcerror() already has a trace point, so perhaps adding trace_rpc_refresh_status() isn't necessary. However, it does report a particular category of error. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Add trace_rpc_timeout_status()Chuck Lever1-1/+1
For a long while we've wanted a tracepoint that fires when a major timeout is reported in the system log. Such a tracepoint can be attached to other actions that can take place when a timeout is detected (eg, server or connection health assessment). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Replace connect dprintk call sites with a tracepointChuck Lever1-4/+0
This trace event can be used to audit transport connections from the client. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Remove dprintk call site in call_start()Chuck Lever1-4/+0
Clean up: The rpc_rpc_request tracepoint serves the same purpose. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Remove the dprint_status() macroChuck Lever1-30/+1
Clean up: The rpc_task_run_action tracepoint serves the same purpose. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Hoist trace_xprtrdma_op_allocate into generic codeChuck Lever1-2/+1
Introduce a tracepoint in call_allocate that reports the exact sizes in the RPC buffer allocation request and the status of the result. This helps catch problems with XDR buffer provisioning, and replaces transport-specific debugging instrumentation. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC dont update timeout value on connection resetOlga Kornievskaia1-1/+2
Current behaviour: every time a v3 operation is re-sent to the server we update (double) the timeout. There is no distinction between whether or not the previous timer had expired before the re-sent happened. Here's the scenario: 1. Client sends a v3 operation 2. Server RST-s the connection (prior to the timeout) (eg., connection is immediately reset) 3. Client re-sends a v3 operation but the timeout is now 120sec. As a result, an application sees 2mins pause before a retry in case server again does not reply. Where as if a connection reset didn't change the timeout value, the client would have re-tried (the 3rd time) after 60secs. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-11/+11
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-11SUNRPC: Set SOFTCONN when destroying GSS contextsChuck Lever1-5/+4
Move the RPC_TASK_SOFTCONN flag into rpc_call_null_helper(). The only minor behavior change is that it is now also set when destroying GSS contexts. This gives a better guarantee that gss_send_destroy_context() will not hang for long if a connection cannot be established. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-06-11SUNRPC: rpc_call_null_helper() should set RPC_TASK_SOFTChuck Lever1-4/+3
Clean up. All of rpc_call_null_helper() call sites assert RPC_TASK_SOFT, so move that setting into rpc_call_null_helper() itself. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-06-11SUNRPC: rpc_call_null_helper() already sets RPC_TASK_NULLCREDSChuck Lever1-2/+2
Clean up. Commit a52458b48af1 ("NFS/NFSD/SUNRPC: replace generic creds with 'struct cred'.") made rpc_call_null_helper() set RPC_TASK_NULLCREDS unconditionally. Therefore there's no need for rpc_call_null_helper()'s call sites to set RPC_TASK_NULLCREDS. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-06-11SUNRPC: trace RPC client lifetime eventsChuck Lever1-24/+15
The "create" tracepoint records parts of the rpc_create arguments, and the shutdown tracepoint records when the rpc_clnt is about to signal pending tasks and destroy auths. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-06-11SUNRPC: Split the xdr_buf event classChuck Lever1-2/+2
To help tie the recorded xdr_buf to a particular RPC transaction, the client side version of this class should display task ID information and the server side one should show the request's XID. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-06-11SUNRPC: Add tracepoint to rpc_call_rpcerror()Chuck Lever1-0/+1
Add a tracepoint in another common exit point for failing RPCs. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-05-14SUNRPC: 'Directory with parent 'rpc_clnt' already present!'J. Bruce Fields1-1/+1
Each rpc_client has a cl_clid which is allocated from a global ida, and a debugfs directory which is named after cl_clid. We're releasing the cl_clid before we free the debugfs directory named after it. As soon as the cl_clid is released, that value is available for another newly created client. That leaves a window where another client may attempt to create a new debugfs directory with the same name as the not-yet-deleted debugfs directory from the dying client. Symptoms are log messages like Directory 4 with parent 'rpc_clnt' already present! Fixes: 7c4310ff5642 "SUNRPC: defer slow parts of rpc_free_client() to a workqueue." Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-05-11SUNRPC: Signalled ASYNC tasks need to exitChuck Lever1-0/+5
Ensure that signalled ASYNC rpc_tasks exit immediately instead of spinning until a timeout (or forever). To avoid checking for the signal flag on every scheduler iteration, the check is instead introduced in the client's finite state machine. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Fixes: ae67bd3821bb ("SUNRPC: Fix up task signalling") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-05-10SUNRPC: fix use-after-free in rpc_free_client_work()NeilBrown1-1/+1
Parts of rpc_free_client() were recently moved to a separate rpc_free_clent_work(). This introduced a use-after-free as rpc_clnt_remove_pipedir() calls rpc_net_ns(), and that uses clnt->cl_xprt which has already been freed. So move the call to xprt_put() after the call to rpc_clnt_remove_pipedir(). Reported-by: syzbot+22b5ef302c7c40d94ea8@syzkaller.appspotmail.com Fixes: 7c4310ff5642 ("SUNRPC: defer slow parts of rpc_free_client() to a workqueue.") Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-04-28SUNRPC: defer slow parts of rpc_free_client() to a workqueue.NeilBrown1-4/+17
The rpciod workqueue is on the write-out path for freeing dirty memory, so it is important that it never block waiting for memory to be allocated - this can lead to a deadlock. rpc_execute() - which is often called by an rpciod work item - calls rcp_task_release_client() which can lead to rpc_free_client(). rpc_free_client() makes two calls which could potentially block wating for memory allocation. rpc_clnt_debugfs_unregister() calls into debugfs and will block while any of the debugfs files are being accessed. In particular it can block while any of the 'open' methods are being called and all of these use malloc for one thing or another. So this can deadlock if the memory allocation waits for NFS to complete some writes via rpciod. rpc_clnt_remove_pipedir() can take the inode_lock() and while it isn't obvious that memory allocations can happen while the lock it held, it is safer to assume they might and to not let rpciod call rpc_clnt_remove_pipedir(). So this patch moves these two calls (together with the final kfree() and rpciod_down()) into a work-item to be run from the system work-queue. rpciod can continue its important work, and the final stages of the free can happen whenever they happen. I have seen this deadlock on a 4.12 based kernel where debugfs used synchronize_srcu() when removing objects. synchronize_srcu() requires a workqueue and there were no free workther threads and none could be allocated. While debugsfs no longer uses SRCU, I believe the deadlock is still possible. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-04-21SUNRPC: Remove unreachable error conditionXiyu Yang1-2/+1
rpc_clnt_test_and_add_xprt() invokes rpc_call_null_helper(), which return the value of rpc_run_task() to "task". Since rpc_run_task() is impossible to return an ERR pointer, there is no need to add the IS_ERR() condition on "task" here. So we need to remove it. Fixes: 7f554890587c ("SUNRPC: Allow addition of new transports to a struct rpc_clnt") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-04-07Merge tag 'nfs-for-5.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds1-2/+6
Pull NFS client updates from Trond Myklebust: "Highlights include: Stable fixes: - Fix a page leak in nfs_destroy_unlinked_subrequests() - Fix use-after-free issues in nfs_pageio_add_request() - Fix new mount code constant_table array definitions - finish_automount() requires us to hold 2 refs to the mount record Features: - Improve the accuracy of telldir/seekdir by using 64-bit cookies when possible. - Allow one RDMA active connection and several zombie connections to prevent blocking if the remote server is unresponsive. - Limit the size of the NFS access cache by default - Reduce the number of references to credentials that are taken by NFS - pNFS files and flexfiles drivers now support per-layout segment COMMIT lists. - Enable partial-file layout segments in the pNFS/flexfiles driver. - Add support for CB_RECALL_ANY to the pNFS flexfiles layout type - pNFS/flexfiles Report NFS4ERR_DELAY and NFS4ERR_GRACE errors from the DS using the layouterror mechanism. Bugfixes and cleanups: - SUNRPC: Fix krb5p regressions - Don't specify NFS version in "UDP not supported" error - nfsroot: set tcp as the default transport protocol - pnfs: Return valid stateids in nfs_layout_find_inode_by_stateid() - alloc_nfs_open_context() must use the file cred when available - Fix locking when dereferencing the delegation cred - Fix memory leaks in O_DIRECT when nfs_get_lock_context() fails - Various clean ups of the NFS O_DIRECT commit code - Clean up RDMA connect/disconnect - Replace zero-length arrays with C99-style flexible arrays" * tag 'nfs-for-5.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (86 commits) NFS: Clean up process of marking inode stale. SUNRPC: Don't start a timer on an already queued rpc task NFS/pnfs: Reference the layout cred in pnfs_prepare_layoutreturn() NFS/pnfs: Fix dereference of layout cred in pnfs_layoutcommit_inode() NFS: Beware when dereferencing the delegation cred NFS: Add a module parameter to set nfs_mountpoint_expiry_timeout NFS: finish_automount() requires us to hold 2 refs to the mount record NFS: Fix a few constant_table array definitions NFS: Try to join page groups before an O_DIRECT retransmission NFS: Refactor nfs_lock_and_join_requests() NFS: Reverse the submission order of requests in __nfs_pageio_add_request() NFS: Clean up nfs_lock_and_join_requests() NFS: Remove the redundant function nfs_pgio_has_mirroring() NFS: Fix memory leaks in nfs_pageio_stop_mirroring() NFS: Fix a request reference leak in nfs_direct_write_clear_reqs() NFS: Fix use-after-free issues in nfs_pageio_add_request() NFS: Fix races nfs_page_group_destroy() vs nfs_destroy_unlinked_subrequests() NFS: Fix a page leak in nfs_destroy_unlinked_subrequests() NFS: Remove unused FLUSH_SYNC support in nfs_initiate_pgio() pNFS/flexfiles: Specify the layout segment range in LAYOUTGET ...
2020-03-16svcrdma: Create a generic tracing class for displaying xdr_buf layoutChuck Lever1-0/+1
This class can be used to create trace points in either the RPC client or RPC server paths. It simply displays the length of each part of an xdr_buf, which is useful to determine that the transport and XDR codecs are operating correctly. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-03-16SUNRPC: Don't take a reference to the cred on synchronous tasksTrond Myklebust1-0/+3
If the RPC call is synchronous, assume the cred is already pinned by the caller. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-03-16SUNRPC: Add a flag to avoid reference counts on credentialsTrond Myklebust1-2/+3
Add a flag to signal to the RPC layer that the credential is already pinned for the duration of the RPC call. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-01-15SUNRPC: call_connect_status should handle -EPROTOChuck Lever1-0/+1
The xprtrdma connect logic can return -EPROTO if the underlying device or network path does not support RDMA. This can happen after a device removal/insertion. - When SOFTCONN is set, EPROTO is a permanent error. - When SOFTCONN is not set, EPROTO is treated as a temporary error. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-11-18Merge tag 'nfs-rdma-for-5.5-1' of ↵Trond Myklebust1-12/+2
git://git.linux-nfs.org/projects/anna/linux-nfs NFSoRDMA Client Updates for Linux 5.5 New Features: - New tracepoints for congestion control and Local Invalidate WRs Bugfixes and Cleanups: - Eliminate log noise in call_reserveresult - Fix unstable connections after a reconnect - Clean up some code duplication - Close race between waking a sender and posting a receive - Fix MR list corruption, and clean up MR usage - Remove unused rpcrdma_sendctx fields - Try to avoid DMA mapping pages if it is too costly - Wake pending tasks if connection fails - Replace some dprintk()s with tracepoints
2019-11-03NFSv4.1: Don't rebind to the same source port when reconnecting to the serverTrond Myklebust1-1/+6
NFSv2, v3 and NFSv4 servers often have duplicate replay caches that look at the source port when deciding whether or not an RPC call is a replay of a previous call. This requires clients to perform strange TCP gymnastics in order to ensure that when they reconnect to the server, they bind to the same source port. NFSv4.1 and NFSv4.2 have sessions that provide proper replay semantics, that do not look at the source port of the connection. This patch therefore ensures they can ignore the rebind requirement. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-10-24SUNRPC: Eliminate log noise in call_reserveresultChuck Lever1-12/+2
Sep 11 16:35:20 manet kernel: call_reserveresult: unrecognized error -512, exiting Diagnostic error messages such as this likely have no value for NFS client administrators. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-09-26Merge tag 'nfs-for-5.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds1-7/+19
Pull NFS client updates from Anna Schumaker: "Stable bugfixes: - Dequeue the request from the receive queue while we're re-encoding # v4.20+ - Fix buffer handling of GSS MIC without slack # 5.1 Features: - Increase xprtrdma maximum transport header and slot table sizes - Add support for nfs4_call_sync() calls using a custom rpc_task_struct - Optimize the default readahead size - Enable pNFS filelayout LAYOUTGET on OPEN Other bugfixes and cleanups: - Fix possible null-pointer dereferences and memory leaks - Various NFS over RDMA cleanups - Various NFS over RDMA comment updates - Don't receive TCP data into a reset request buffer - Don't try to parse incomplete RPC messages - Fix congestion window race with disconnect - Clean up pNFS return-on-close error handling - Fixes for NFS4ERR_OLD_STATEID handling" * tag 'nfs-for-5.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (53 commits) pNFS/filelayout: enable LAYOUTGET on OPEN NFS: Optimise the default readahead size NFSv4: Handle NFS4ERR_OLD_STATEID in LOCKU NFSv4: Handle NFS4ERR_OLD_STATEID in CLOSE/OPEN_DOWNGRADE NFSv4: Fix OPEN_DOWNGRADE error handling pNFS: Handle NFS4ERR_OLD_STATEID on layoutreturn by bumping the state seqid NFSv4: Add a helper to increment stateid seqids NFSv4: Handle RPC level errors in LAYOUTRETURN NFSv4: Handle NFS4ERR_DELAY correctly in return-on-close NFSv4: Clean up pNFS return-on-close error handling pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors NFS: remove unused check for negative dentry NFSv3: use nfs_add_or_obtain() to create and reference inodes NFS: Refactor nfs_instantiate() for dentry referencing callers SUNRPC: Fix congestion window race with disconnect SUNRPC: Don't try to parse incomplete RPC messages SUNRPC: Rename xdr_buf_read_netobj to xdr_buf_read_mic SUNRPC: Fix buffer handling of GSS MIC without slack SUNRPC: RPC level errors should always set task->tk_rpc_status SUNRPC: Don't receive TCP data into a request buffer that has been reset ...
2019-09-20SUNRPC: Don't try to parse incomplete RPC messagesTrond Myklebust1-1/+13
If the copy of the RPC reply into our buffers did not complete, and we could end up with a truncated message. In that case, just resend the call. Fixes: a0584ee9aed80 ("SUNRPC: Use struct xdr_stream when decoding...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-09-17SUNRPC: RPC level errors should always set task->tk_rpc_statusTrond Myklebust1-3/+3
Ensure that we set task->tk_rpc_status for all RPC level errors so that the caller can distinguish between those and server reply status errors. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-09-17SUNRPC: Dequeue the request from the receive queue while we're re-encodingTrond Myklebust1-3/+3
Ensure that we dequeue the request from the transport receive queue while we're re-encoding to prevent issues like use-after-free when we release the bvec. Fixes: 7536908982047 ("SUNRPC: Ensure the bvecs are reset when we re-encode...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-08-26SUNRPC: Handle connection breakages correctly in call_status()Trond Myklebust1-1/+1
If the connection breaks while we're waiting for a reply from the server, then we want to immediately try to reconnect. Fixes: ec6017d90359 ("SUNRPC fix regression in umount of a secure mount") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-08-26SUNRPC: Handle EADDRINUSE and ENOBUFS correctlyTrond Myklebust1-3/+7
If a connect or bind attempt returns EADDRINUSE, that means we want to retry with a different port. It is not a fatal connection error. Similarly, ENOBUFS is not fatal, but just indicates a memory allocation issue. Retry after a short delay. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-08-26SUNRPC: Don't handle errors if the bind/connect succeededTrond Myklebust1-11/+24
Don't handle errors in call_bind_status()/call_connect_status() if it turns out that a previous call caused it to succeed. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v5.1+
2019-07-18SUNRPC: Ensure the bvecs are reset when we re-encode the RPC requestTrond Myklebust1-2/+1
The bvec tracks the list of pages, so if the number of pages changes due to a re-encode, we need to reset the bvec as well. Fixes: 277e4ab7d530 ("SUNRPC: Simplify TCP receive code by switching...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.20+
2019-07-18SUNRPC: Fix up backchannel slot table accountingTrond Myklebust1-0/+13
Add a per-transport maximum limit in the socket case, and add helpers to allow the NFSv4 code to discover that limit. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-12SUNRPC: Fix transport accounting when caller specifies an rpc_xprtTrond Myklebust1-22/+20
Ensure that we do the required accounting for the round robin queue when the caller to rpc_init_task() has passed in a transport to be used. Reported-by: Olga Kornievskaia <aglo@umich.edu> Reported-by: Neil Brown <neilb@suse.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06NFS: send state management on a single connection.NeilBrown1-1/+23
With NFSv4.1, different network connections need to be explicitly bound to a session. During session startup, this is not possible so only a single connection must be used for session startup. So add a task flag to disable the default round-robin choice of connections (when nconnect > 1) and force the use of a single connection. Then use that flag on all requests for session management - for consistence, include NFSv4.0 management (SETCLIENTID) and session destruction Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-06SUNRPC: Allow creation of RPC clients with multiple connectionsTrond Myklebust1-1/+16
Add an argument to struct rpc_create_args that allows the specification of how many transport connections you want to set up to the server. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2019-07-06SUNRPC: Add basic load balancing to the transport switchTrond Myklebust1-3/+37
For now, just count the queue length. It is less accurate than counting number of bytes queued, but easier to implement. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 04:59:06 +0000