summaryrefslogtreecommitdiff
path: root/net/sctp/socket.c
AgeCommit message (Collapse)AuthorFilesLines
2023-10-04sctp: update hb timer immediately after users change hb_intervalXin Long1-0/+1
Currently, when hb_interval is changed by users, it won't take effect until the next expiry of hb timer. As the default value is 30s, users have to wait up to 30s to wait its hb_interval update to work. This becomes pretty bad in containers where a much smaller value is usually set on hb_interval. This patch improves it by resetting the hb timer immediately once the value of hb_interval is updated by users. Note that we don't address the already existing 'problem' when sending a heartbeat 'on demand' if one hb has just been sent(from the timer) mentioned in: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg590224.html Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/75465785f8ee5df2fb3acdca9b8fafdc18984098.1696172660.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-31sctp: annotate data-races around sk->sk_wmem_queuedEric Dumazet1-5/+5
sk->sk_wmem_queued can be read locklessly from sctp_poll() Use sk_wmem_queued_add() when the field is changed, and add READ_ONCE() annotations in sctp_writeable() and sctp_assocs_seq_show() syzbot reported: BUG: KCSAN: data-race in sctp_poll / sctp_wfree read-write to 0xffff888149d77810 of 4 bytes by interrupt on cpu 0: sctp_wfree+0x170/0x4a0 net/sctp/socket.c:9147 skb_release_head_state+0xb7/0x1a0 net/core/skbuff.c:988 skb_release_all net/core/skbuff.c:1000 [inline] __kfree_skb+0x16/0x140 net/core/skbuff.c:1016 consume_skb+0x57/0x180 net/core/skbuff.c:1232 sctp_chunk_destroy net/sctp/sm_make_chunk.c:1503 [inline] sctp_chunk_put+0xcd/0x130 net/sctp/sm_make_chunk.c:1530 sctp_datamsg_put+0x29a/0x300 net/sctp/chunk.c:128 sctp_chunk_free+0x34/0x50 net/sctp/sm_make_chunk.c:1515 sctp_outq_sack+0xafa/0xd70 net/sctp/outqueue.c:1381 sctp_cmd_process_sack net/sctp/sm_sideeffect.c:834 [inline] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1366 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x12c7/0x31b0 net/sctp/sm_sideeffect.c:1169 sctp_assoc_bh_rcv+0x2b2/0x430 net/sctp/associola.c:1051 sctp_inq_push+0x108/0x120 net/sctp/inqueue.c:80 sctp_rcv+0x116e/0x1340 net/sctp/input.c:243 sctp6_rcv+0x25/0x40 net/sctp/ipv6.c:1120 ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437 ip6_input_finish net/ipv6/ip6_input.c:482 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:303 [inline] ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core net/core/dev.c:5452 [inline] __netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566 process_backlog+0x21f/0x380 net/core/dev.c:5894 __napi_poll+0x60/0x3b0 net/core/dev.c:6460 napi_poll net/core/dev.c:6527 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6660 __do_softirq+0xc1/0x265 kernel/softirq.c:553 run_ksoftirqd+0x17/0x20 kernel/softirq.c:921 smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164 kthread+0x1d7/0x210 kernel/kthread.c:389 ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 read to 0xffff888149d77810 of 4 bytes by task 17828 on cpu 1: sctp_writeable net/sctp/socket.c:9304 [inline] sctp_poll+0x265/0x410 net/sctp/socket.c:8671 sock_poll+0x253/0x270 net/socket.c:1374 vfs_poll include/linux/poll.h:88 [inline] do_pollfd fs/select.c:873 [inline] do_poll fs/select.c:921 [inline] do_sys_poll+0x636/0xc00 fs/select.c:1015 __do_sys_ppoll fs/select.c:1121 [inline] __se_sys_ppoll+0x1af/0x1f0 fs/select.c:1101 __x64_sys_ppoll+0x67/0x80 fs/select.c:1101 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00019e80 -> 0x0000cc80 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 17828 Comm: syz-executor.1 Not tainted 6.5.0-rc7-syzkaller-00185-g28f20a19294d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20230830094519.950007-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+2
Cross-merge networking fixes after downstream PR. Conflicts: include/net/inet_sock.h f866fbc842de ("ipv4: fix data-races around inet->inet_id") c274af224269 ("inet: introduce inet->inet_flags") https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/ Adjacent changes: drivers/net/bonding/bond_alb.c e74216b8def3 ("bonding: fix macvlan over alb bond support") f11e5bd159b0 ("bonding: support balance-alb with openvswitch") drivers/net/ethernet/broadcom/bgmac.c d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()") 23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()") drivers/net/ethernet/broadcom/genet/bcmmii.c 32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()") acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()") net/sctp/socket.c f866fbc842de ("ipv4: fix data-races around inet->inet_id") b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-20ipv4: fix data-races around inet->inet_idEric Dumazet1-1/+1
UDP sendmsg() is lockless, so ip_select_ident_segs() can very well be run from multiple cpus [1] Convert inet->inet_id to an atomic_t, but implement a dedicated path for TCP, avoiding cost of a locked instruction (atomic_add_return()) Note that this patch will cause a trivial merge conflict because we added inet->flags in net-next tree. v2: added missing change in drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c (David Ahern) [1] BUG: KCSAN: data-race in __ip_make_skb / __ip_make_skb read-write to 0xffff888145af952a of 2 bytes by task 7803 on cpu 1: ip_select_ident_segs include/net/ip.h:542 [inline] ip_select_ident include/net/ip.h:556 [inline] __ip_make_skb+0x844/0xc70 net/ipv4/ip_output.c:1446 ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560 udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260 inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmmsg+0x269/0x500 net/socket.c:2634 __do_sys_sendmmsg net/socket.c:2663 [inline] __se_sys_sendmmsg net/socket.c:2660 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff888145af952a of 2 bytes by task 7804 on cpu 0: ip_select_ident_segs include/net/ip.h:541 [inline] ip_select_ident include/net/ip.h:556 [inline] __ip_make_skb+0x817/0xc70 net/ipv4/ip_output.c:1446 ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560 udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260 inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmmsg+0x269/0x500 net/socket.c:2634 __do_sys_sendmmsg net/socket.c:2663 [inline] __se_sys_sendmmsg net/socket.c:2660 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x184d -> 0x184e Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 7804 Comm: syz-executor.1 Not tainted 6.5.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 ================================================================== Fixes: 23f57406b82d ("ipv4: avoid using shared IP generator for connected sockets") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-18sock: annotate data-races around prot->memory_pressureEric Dumazet1-1/+1
*prot->memory_pressure is read/writen locklessly, we need to add proper annotations. A recent commit added a new race, it is time to audit all accesses. Fixes: 2d0c88e84e48 ("sock: Fix misuse of sk_under_memory_pressure()") Fixes: 4d93df0abd50 ("[SCTP]: Rewrite of sctp buffer management code") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Abel Wu <wuyun.abel@bytedance.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Link: https://lore.kernel.org/r/20230818015132.2699348-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-16inet: move inet->mc_loop to inet->inet_fragsEric Dumazet1-1/+1
IP_MULTICAST_LOOP socket option can now be set/read without locking the socket. v3: fix build bot error reported in ipvs set_mcast_loop() Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24ipv6: remove hard coded limitation on ipv6_pinfoEric Dumazet1-0/+1
IPv6 inet sockets are supposed to have a "struct ipv6_pinfo" field at the end of their definition, so that inet6_sk_generic() can derive from socket size the offset of the "struct ipv6_pinfo". This is very fragile, and prevents adding bigger alignment in sockets, because inet6_sk_generic() does not work if the compiler adds padding after the ipv6_pinfo component. We are currently working on a patch series to reorganize TCP structures for better data locality and found issues similar to the one fixed in commit f5d547676ca0 ("tcp: fix tcp_inet6_sk() for 32bit kernels") Alternative would be to force an alignment on "struct ipv6_pinfo", greater or equal to __alignof__(any ipv6 sock) to ensure there is no padding. This does not look great. v2: fix typo in mptcp_proto_v6_init() (Paolo) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Chao Wu <wwchao@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: YiFei Zhu <zhuyifei@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-29sctp: fix potential deadlock on &net->sctp.addr_wq_lockChengfeng Ye1-2/+2
As &net->sctp.addr_wq_lock is also acquired by the timer sctp_addr_wq_timeout_handler() in protocal.c, the same lock acquisition at sctp_auto_asconf_init() seems should disable irq since it is called from sctp_accept() under process context. Possible deadlock scenario: sctp_accept() -> sctp_sock_migrate() -> sctp_auto_asconf_init() -> spin_lock(&net->sctp.addr_wq_lock) <timer interrupt> -> sctp_addr_wq_timeout_handler() -> spin_lock_bh(&net->sctp.addr_wq_lock); (deadlock here) This flaw was found using an experimental static analysis tool we are developing for irq-related deadlock. The tentative patch fix the potential deadlock by spin_lock_bh(). Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Fixes: 34e5b0118685 ("sctp: delay auto_asconf init until binding the first addr") Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20230627120340.19432-1-dg573847474@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-15net: ioctl: Use kernel memory on protocol ioctl callbacksBreno Leitao1-4/+4
Most of the ioctls to net protocols operates directly on userspace argument (arg). Usually doing get_user()/put_user() directly in the ioctl callback. This is not flexible, because it is hard to reuse these functions without passing userspace buffers. Change the "struct proto" ioctls to avoid touching userspace memory and operate on kernel buffers, i.e., all protocol's ioctl callbacks is adapted to operate on a kernel memory other than on userspace (so, no more {put,get}_user() and friends being called in the ioctl callback). This changes the "struct proto" ioctl format in the following way: int (*ioctl)(struct sock *sk, int cmd, - unsigned long arg); + int *karg); (Important to say that this patch does not touch the "struct proto_ops" protocols) So, the "karg" argument, which is passed to the ioctl callback, is a pointer allocated to kernel space memory (inside a function wrapper). This buffer (karg) may contain input argument (copied from userspace in a prep function) and it might return a value/buffer, which is copied back to userspace if necessary. There is not one-size-fits-all format (that is I am using 'may' above), but basically, there are three type of ioctls: 1) Do not read from userspace, returns a result to userspace 2) Read an input parameter from userspace, and does not return anything to userspace 3) Read an input from userspace, and return a buffer to userspace. The default case (1) (where no input parameter is given, and an "int" is returned to userspace) encompasses more than 90% of the cases, but there are two other exceptions. Here is a list of exceptions: * Protocol RAW: * cmd = SIOCGETVIFCNT: * input and output = struct sioc_vif_req * cmd = SIOCGETSGCNT * input and output = struct sioc_sg_req * Explanation: for the SIOCGETVIFCNT case, userspace passes the input argument, which is struct sioc_vif_req. Then the callback populates the struct, which is copied back to userspace. * Protocol RAW6: * cmd = SIOCGETMIFCNT_IN6 * input and output = struct sioc_mif_req6 * cmd = SIOCGETSGCNT_IN6 * input and output = struct sioc_sg_req6 * Protocol PHONET: * cmd == SIOCPNADDRESOURCE | SIOCPNDELRESOURCE * input int (4 bytes) * Nothing is copied back to userspace. For the exception cases, functions sock_sk_ioctl_inout() will copy the userspace input, and copy it back to kernel space. The wrapper that prepare the buffer and put the buffer back to user is sk_ioctl(), so, instead of calling sk->sk_prot->ioctl(), the callee now calls sk_ioctl(), which will handle all cases. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230609152800.830401-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-12sctp: add bpf_bypass_getsockopt proto callbackAlexander Mikhalitsyn1-0/+18
Implement ->bpf_bypass_getsockopt proto callback and filter out SCTP_SOCKOPT_PEELOFF, SCTP_SOCKOPT_PEELOFF_FLAGS and SCTP_SOCKOPT_CONNECTX3 socket options from running eBPF hook on them. SCTP_SOCKOPT_PEELOFF and SCTP_SOCKOPT_PEELOFF_FLAGS options do fd_install(), and if BPF_CGROUP_RUN_PROG_GETSOCKOPT hook returns an error after success of the original handler sctp_getsockopt(...), userspace will receive an error from getsockopt syscall and will be not aware that fd was successfully installed into a fdtable. As pointed by Marcelo Ricardo Leitner it seems reasonable to skip bpf getsockopt hook for SCTP_SOCKOPT_CONNECTX3 sockopt too. Because internaly, it triggers connect() and if error is masked then userspace will be confused. This patch was born as a result of discussion around a new SCM_PIDFD interface: https://lore.kernel.org/all/20230413133355.350571-3-aleksandr.mikhalitsyn@canonical.com/ Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks") Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Christian Brauner <brauner@kernel.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Suggested-by: Stanislav Fomichev <sdf@google.com> Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Acked-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17sctp: add intl_capable and reconf_capable in ss peer_capableXin Long1-2/+3
There are two new peer capables have been added since sctp_diag was introduced into SCTP. When dumping the peer capables, these two new peer capables should also be included. To not break the old capables, reconf_capable takes the old hostname_address bit, and intl_capable uses the higher available bit in sctpi_peer_capable. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-17sctp: delete the obsolete code for the host name address paramXin Long1-1/+1
In the latest RFC9260, the Host Name Address param has been deprecated. For INIT chunk: Note 3: An INIT chunk MUST NOT contain the Host Name Address parameter. The receiver of an INIT chunk containing a Host Name Address parameter MUST send an ABORT chunk and MAY include an "Unresolvable Address" error cause. For Supported Address Types: The value indicating the Host Name Address parameter MUST NOT be used when sending this parameter and MUST be ignored when receiving this parameter. Currently Linux SCTP doesn't really support Host Name Address param, but only saves some flag and print debug info, which actually won't even be triggered due to the verification in sctp_verify_param(). This patch is to delete those dead code. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-02sctp: check send stream number after wait_for_sndbufXin Long1-0/+4
This patch fixes a corner case where the asoc out stream count may change after wait_for_sndbuf. When the main thread in the client starts a connection, if its out stream count is set to N while the in stream count in the server is set to N - 2, another thread in the client keeps sending the msgs with stream number N - 1, and waits for sndbuf before processing INIT_ACK. However, after processing INIT_ACK, the out stream count in the client is shrunk to N - 2, the same to the in stream count in the server. The crash occurs when the thread waiting for sndbuf is awake and sends the msg in a non-existing stream(N - 1), the call trace is as below: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] Call Trace: <TASK> sctp_cmd_send_msg net/sctp/sm_sideeffect.c:1114 [inline] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1777 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline] sctp_do_sm+0x197d/0x5310 net/sctp/sm_sideeffect.c:1170 sctp_primitive_SEND+0x9f/0xc0 net/sctp/primitive.c:163 sctp_sendmsg_to_asoc+0x10eb/0x1a30 net/sctp/socket.c:1868 sctp_sendmsg+0x8d4/0x1d90 net/sctp/socket.c:2026 inet_sendmsg+0x9d/0xe0 net/ipv4/af_inet.c:825 sock_sendmsg_nosec net/socket.c:722 [inline] sock_sendmsg+0xde/0x190 net/socket.c:745 The fix is to add an unlikely check for the send stream number after the thread wakes up from the wait_for_sndbuf. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: syzbot+47c24ca20a2fa01f082e@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25inet: Add IP_LOCAL_PORT_RANGE socket optionJakub Sitnicki1-1/+1
Users who want to share a single public IP address for outgoing connections between several hosts traditionally reach for SNAT. However, SNAT requires state keeping on the node(s) performing the NAT. A stateless alternative exists, where a single IP address used for egress can be shared between several hosts by partitioning the available ephemeral port range. In such a setup: 1. Each host gets assigned a disjoint range of ephemeral ports. 2. Applications open connections from the host-assigned port range. 3. Return traffic gets routed to the host based on both, the destination IP and the destination port. An application which wants to open an outgoing connection (connect) from a given port range today can choose between two solutions: 1. Manually pick the source port by bind()'ing to it before connect()'ing the socket. This approach has a couple of downsides: a) Search for a free port has to be implemented in the user-space. If the chosen 4-tuple happens to be busy, the application needs to retry from a different local port number. Detecting if 4-tuple is busy can be either easy (TCP) or hard (UDP). In TCP case, the application simply has to check if connect() returned an error (EADDRNOTAVAIL). That is assuming that the local port sharing was enabled (REUSEADDR) by all the sockets. # Assume desired local port range is 60_000-60_511 s = socket(AF_INET, SOCK_STREAM) s.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1) s.bind(("192.0.2.1", 60_000)) s.connect(("1.1.1.1", 53)) # Fails only if 192.0.2.1:60000 -> 1.1.1.1:53 is busy # Application must retry with another local port In case of UDP, the network stack allows binding more than one socket to the same 4-tuple, when local port sharing is enabled (REUSEADDR). Hence detecting the conflict is much harder and involves querying sock_diag and toggling the REUSEADDR flag [1]. b) For TCP, bind()-ing to a port within the ephemeral port range means that no connecting sockets, that is those which leave it to the network stack to find a free local port at connect() time, can use the this port. IOW, the bind hash bucket tb->fastreuse will be 0 or 1, and the port will be skipped during the free port search at connect() time. 2. Isolate the app in a dedicated netns and use the use the per-netns ip_local_port_range sysctl to adjust the ephemeral port range bounds. The per-netns setting affects all sockets, so this approach can be used only if: - there is just one egress IP address, or - the desired egress port range is the same for all egress IP addresses used by the application. For TCP, this approach avoids the downsides of (1). Free port search and 4-tuple conflict detection is done by the network stack: system("sysctl -w net.ipv4.ip_local_port_range='60000 60511'") s = socket(AF_INET, SOCK_STREAM) s.setsockopt(SOL_IP, IP_BIND_ADDRESS_NO_PORT, 1) s.bind(("192.0.2.1", 0)) s.connect(("1.1.1.1", 53)) # Fails if all 4-tuples 192.0.2.1:60000-60511 -> 1.1.1.1:53 are busy For UDP this approach has limited applicability. Setting the IP_BIND_ADDRESS_NO_PORT socket option does not result in local source port being shared with other connected UDP sockets. Hence relying on the network stack to find a free source port, limits the number of outgoing UDP flows from a single IP address down to the number of available ephemeral ports. To put it another way, partitioning the ephemeral port range between hosts using the existing Linux networking API is cumbersome. To address this use case, add a new socket option at the SOL_IP level, named IP_LOCAL_PORT_RANGE. The new option can be used to clamp down the ephemeral port range for each socket individually. The option can be used only to narrow down the per-netns local port range. If the per-socket range lies outside of the per-netns range, the latter takes precedence. UAPI-wise, the low and high range bounds are passed to the kernel as a pair of u16 values in host byte order packed into a u32. This avoids pointer passing. PORT_LO = 40_000 PORT_HI = 40_511 s = socket(AF_INET, SOCK_STREAM) v = struct.pack("I", PORT_HI << 16 | PORT_LO) s.setsockopt(SOL_IP, IP_LOCAL_PORT_RANGE, v) s.bind(("127.0.0.1", 0)) s.getsockname() # Local address between ("127.0.0.1", 40_000) and ("127.0.0.1", 40_511), # if there is a free port. EADDRINUSE otherwise. [1] https://github.com/cloudflare/cloudflare-blog/blob/232b432c1d57/2022-02-connectx/connectx.py#L116 Reviewed-by: Marek Majkowski <marek@cloudflare.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-23net/sock: Introduce trace_sk_data_ready()Peilin Ye1-0/+3
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready() callback implementations. For example: <...> iperf-609 [002] ..... 70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable iperf-609 [002] ..... 70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable <...> Suggested-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-13Merge tag 'net-next-6.2' of ↵Linus Torvalds1-11/+27
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
2022-11-18sctp: add dif and sdif check in asoc and ep lookupXin Long1-2/+2
This patch at first adds a pernet global l3mdev_accept to decide if it accepts the packets from a l3mdev when a SCTP socket doesn't bind to any interface. It's set to 1 to avoid any possible incompatible issue, and in next patch, a sysctl will be introduced to allow to change it. Then similar to inet/udp_sk_bound_dev_eq(), sctp_sk_bound_dev_eq() is added to check either dif or sdif is equal to sk_bound_dev_if, and to check sid is 0 or l3mdev_accept is 1 if sk_bound_dev_if is not set. This function is used to match a association or a endpoint, namely called by sctp_addrs_lookup_transport() and sctp_endpoint_is_match(). All functions that needs updating are: sctp_rcv(): asoc: __sctp_rcv_lookup() __sctp_lookup_association() -> sctp_addrs_lookup_transport() __sctp_rcv_lookup_harder() __sctp_rcv_init_lookup() __sctp_lookup_association() -> sctp_addrs_lookup_transport() __sctp_rcv_walk_lookup() __sctp_rcv_asconf_lookup() __sctp_lookup_association() -> sctp_addrs_lookup_transport() ep: __sctp_rcv_lookup_endpoint() -> sctp_endpoint_is_match() sctp_connect(): sctp_endpoint_is_peeled_off() __sctp_lookup_association() sctp_has_association() sctp_lookup_association() __sctp_lookup_association() -> sctp_addrs_lookup_transport() sctp_diag_dump_one(): sctp_transport_lookup_process() -> sctp_addrs_lookup_transport() Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18sctp: check sk_bound_dev_if when matching ep in get_portXin Long1-1/+4
In sctp_get_port_local(), when binding to IP and PORT, it should also check sk_bound_dev_if to match listening sk if it's set by SO_BINDTOIFINDEX, so that multiple sockets with the same IP and PORT, but different sk_bound_dev_if can be listened at the same time. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld1-1/+1
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-24sctp: Call inet6_destroy_sock() via sk->sk_destruct().Kuniyuki Iwashima1-8/+21
After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in sk->sk_destruct() by setting inet6_sock_destruct() to it to make sure we do not leak inet6-specific resources. SCTP sets its own sk->sk_destruct() in the sctp_init_sock(), and SCTPv6 socket reuses it as the init function. To call inet6_sock_destruct() from SCTPv6 sk->sk_destruct(), we set sctp_v6_destruct_sock() in a new init function. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld1-1/+1
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld1-1/+1
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-06-10net: keep sk->sk_forward_alloc as small as possibleEric Dumazet1-5/+0
Currently, tcp_memory_allocated can hit tcp_mem[] limits quite fast. Each TCP socket can forward allocate up to 2 MB of memory, even after flow became less active. 10,000 sockets can have reserved 20 GB of memory, and we have no shrinker in place to reclaim that. Instead of trying to reclaim the extra allocations in some places, just keep sk->sk_forward_alloc values as small as possible. This should not impact performance too much now we have per-cpu reserves: Changes to tcp_memory_allocated should not be too frequent. For sockets not using SO_RESERVE_MEM: - idle sockets (no packets in tx/rx queues) have zero forward alloc. - non idle sockets have a forward alloc smaller than one page. Note: - Removal of SK_RECLAIM_CHUNK and SK_RECLAIM_THRESHOLD is left to MPTCP maintainers as a follow up. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-10net: add per_cpu_fw_alloc field to struct protoEric Dumazet1-0/+7
Each protocol having a ->memory_allocated pointer gets a corresponding per-cpu reserve, that following patches will use. Instead of having reserved bytes per socket, we want to have per-cpu reserves. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28net: SO_RCVMARK socket option for SO_MARK with recvmsg()Erin MacNeil1-1/+1
Adding a new socket option, SO_RCVMARK, to indicate that SO_MARK should be included in the ancillary data returned by recvmsg(). Renamed the sock_recv_ts_and_drops() function to sock_recv_cmsgs(). Signed-off-by: Erin MacNeil <lnx.erin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20220427200259.2564-1-lnx.erin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni1-1/+1
2022-04-12net: remove noblock parameter from recvmsg() entitiesOliver Hartkopp1-9/+7
The internal recvmsg() functions have two parameters 'flags' and 'noblock' that were merged inside skb_recv_datagram(). As a follow up patch to commit f4b41f062c42 ("net: remove noblock parameter from skb_recv_datagram()") this patch removes the separate 'noblock' parameter for recvmsg(). Analogue to the referenced patch for skb_recv_datagram() the 'flags' and 'noblock' parameters are unnecessarily split up with e.g. err = sk->sk_prot->recvmsg(sk, msg, size, flags & MSG_DONTWAIT, flags & ~MSG_DONTWAIT, &addr_len); or in err = INDIRECT_CALL_2(sk->sk_prot->recvmsg, tcp_recvmsg, udp_recvmsg, sk, msg, size, flags & MSG_DONTWAIT, flags & ~MSG_DONTWAIT, &addr_len); instead of simply using only flags all the time and check for MSG_DONTWAIT where needed (to preserve for the formerly separated no(n)block condition). Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20220411124955.154876-1-socketcan@hartkopp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-11sctp: Initialize daddr on peeled off socketPetr Malat1-1/+1
Function sctp_do_peeloff() wrongly initializes daddr of the original socket instead of the peeled off socket, which makes getpeername() return zeroes instead of the primary address. Initialize the new socket instead. Fixes: d570ee490fb1 ("[SCTP]: Correctly set daddr for IPv6 sockets during peeloff") Signed-off-by: Petr Malat <oss@malat.biz> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://lore.kernel.org/r/20220409063611.673193-1-oss@malat.biz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-7/+15
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-02sctp: hold endpoint before calling cb in sctp_transport_lookup_processXin Long1-7/+15
The same fix in commit 5ec7d18d1813 ("sctp: use call_rcu to free endpoint") is also needed for dumping one asoc and sock after the lookup. Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-8/+15
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c commit 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port") commit 31108d142f36 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'") commit 4390c6edc0fb ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'") https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/ net/smc/smc_wr.c commit 49dc9013e34b ("net/smc: Use the bitmap API when applicable") commit 349d43127dac ("net/smc: fix kernel panic caused by race of smc_sock") bitmap_zero()/memset() is removed by the fix Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-25sctp: use call_rcu to free endpointXin Long1-8/+15
This patch is to delay the endpoint free by calling call_rcu() to fix another use-after-free issue in sctp_sock_dump(): BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20 Call Trace: __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218 lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:334 [inline] __lock_sock+0x203/0x350 net/core/sock.c:2253 lock_sock_nested+0xfe/0x120 net/core/sock.c:2774 lock_sock include/net/sock.h:1492 [inline] sctp_sock_dump+0x122/0xb20 net/sctp/diag.c:324 sctp_for_each_transport+0x2b5/0x370 net/sctp/socket.c:5091 sctp_diag_dump+0x3ac/0x660 net/sctp/diag.c:527 __inet_diag_dump+0xa8/0x140 net/ipv4/inet_diag.c:1049 inet_diag_dump+0x9b/0x110 net/ipv4/inet_diag.c:1065 netlink_dump+0x606/0x1080 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x59a/0x7c0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:216 [inline] inet_diag_handler_cmd+0x2ce/0x3f0 net/ipv4/inet_diag.c:1170 __sock_diag_cmd net/core/sock_diag.c:232 [inline] sock_diag_rcv_msg+0x31d/0x410 net/core/sock_diag.c:263 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2477 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:274 This issue occurs when asoc is peeled off and the old sk is freed after getting it by asoc->base.sk and before calling lock_sock(sk). To prevent the sk free, as a holder of the sk, ep should be alive when calling lock_sock(). This patch uses call_rcu() and moves sock_put and ep free into sctp_endpoint_destroy_rcu(), so that it's safe to try to hold the ep under rcu_read_lock in sctp_transport_traverse_process(). If sctp_endpoint_hold() returns true, it means this ep is still alive and we have held it and can continue to dump it; If it returns false, it means this ep is dead and can be freed after rcu_read_unlock, and we should skip it. In sctp_sock_dump(), after locking the sk, if this ep is different from tsp->asoc->ep, it means during this dumping, this asoc was peeled off before calling lock_sock(), and the sk should be skipped; If this ep is the same with tsp->asoc->ep, it means no peeloff happens on this asoc, and due to lock_sock, no peeloff will happen either until release_sock. Note that delaying endpoint free won't delay the port release, as the port release happens in sctp_endpoint_destroy() before calling call_rcu(). Also, freeing endpoint by call_rcu() makes it safe to access the sk by asoc->base.sk in sctp_assocs_seq_show() and sctp_rcv(). Thanks Jones to bring this issue up. v1->v2: - improve the changelog. - add kfree(ep) into sctp_endpoint_destroy_rcu(), as Jakub noticed. Reported-by: syzbot+9276d76e83e3bcde6c99@syzkaller.appspotmail.com Reported-by: Lee Jones <lee.jones@linaro.org> Fixes: d25adbeb0cdb ("sctp: fix an use-after-free issue in sctp_sock_dump") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-23sctp: move hlist_node and hashent out of sctp_ep_commonXin Long1-3/+3
Struct sctp_ep_common is included in both asoc and ep, but hlist_node and hashent are only needed by ep after asoc_hashtable was dropped by Commit b5eff7128366 ("sctp: drop the old assoc hashtable of sctp"). So it is better to move hlist_node and hashent from sctp_ep_common to sctp_endpoint, and it saves some space for each asoc. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-16net: drop nopreempt requirement on sock_prot_inuse_add()Eric Dumazet1-5/+0
This is distracting really, let's make this simpler, because many callers had to take care of this by themselves, even if on x86 this adds more code than really needed. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-03security: pass asoc to sctp_assoc_request and sctp_sk_cloneXin Long1-3/+2
This patch is to move secid and peer_secid from endpoint to association, and pass asoc to sctp_assoc_request and sctp_sk_clone instead of ep. As ep is the local endpoint and asoc represents a connection, and in SCTP one sk/ep could have multiple asoc/connection, saving secid/peer_secid for new asoc will overwrite the old asoc's. Note that since asoc can be passed as NULL, security_sctp_assoc_request() is moved to the place right after the new_asoc is created in sctp_sf_do_5_1B_init() and sctp_sf_do_unexpected_init(). v1->v2: - fix the description of selinux_netlbl_skbuff_setsid(), as Jakub noticed. - fix the annotation in selinux_sctp_assoc_request(), as Richard Noticed. Fixes: 72e89f50084c ("security: Add support for SCTP security hooks") Reported-by: Prashanth Prahlad <pprahlad@redhat.com> Reviewed-by: Richard Haines <richard_c_haines@btinternet.com> Tested-by: Richard Haines <richard_c_haines@btinternet.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-18sctp: trim optlen when it's a huge value in sctp_setsockoptXin Long1-0/+4
After commit ca84bd058dae ("sctp: copy the optval from user space in sctp_setsockopt"), it does memory allocation in sctp_setsockopt with the optlen, and it would fail the allocation and return error if the optlen from user space is a huge value. This breaks some sockopts, like SCTP_HMAC_IDENT, SCTP_RESET_STREAMS and SCTP_AUTH_KEY, as when processing these sockopts before, optlen would be trimmed to a biggest value it needs when optlen is a huge value, instead of failing the allocation and returning error. This patch is to fix the allocation failure when it's a huge optlen from user space by trimming it to the biggest size sctp sockopt may need when necessary, and this biggest size is from sctp_setsockopt_reset_streams() for SCTP_RESET_STREAMS, which is bigger than those for SCTP_HMAC_IDENT and SCTP_AUTH_KEY. Fixes: ca84bd058dae ("sctp: copy the optval from user space in sctp_setsockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: enable PLPMTUD when the transport is readyXin Long1-1/+5
sctp_transport_pl_reset() is called whenever any of these 3 members in transport is changed: - probe_interval - param_flags & SPP_PMTUD_ENABLE - state == ACTIVE If all are true, start the PLPMTUD when it's not yet started. If any of these is false, stop the PLPMTUD when it's already running. sctp_transport_pl_update() is called when the transport dst has changed. It will restart the PLPMTUD probe. Again, the pathmtu won't change but use the dst's mtu until the Search phase is done. Note that after using PLPMTUD, the pathmtu is only initialized with the dst mtu when the transport dst changes. At other time it is updated by pl.pmtu. So sctp_transport_pmtu_check() will be called only when PLPMTUD is disabled in sctp_packet_config(). After this patch, the PLPMTUD feature from RFC8899 will be activated and can be used by users. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add SCTP_PLPMTUD_PROBE_INTERVAL sockopt for sock/asoc/transportXin Long1-0/+118
With this socket option, users can change probe_interval for a transport, asoc or sock after it's created. Note that if the change is for an asoc, also apply the change to each transport in this asoc. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add probe_interval in sysctl and sock/asoc/transportXin Long1-0/+1
PLPMTUD can be enabled by doing 'sysctl -w net.sctp.probe_interval=n'. 'n' is the interval for PLPMTUD probe timer in milliseconds, and it can't be less than 5000 if it's not 0. All asoc/transport's PLPMTUD in a new socket will be enabled by default. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25sctp: add the missing setting for asoc encap_portXin Long1-0/+1
This patch is to add the missing setting back for asoc encap_port. Fixes: 8dba29603b5c ("sctp: add SCTP_REMOTE_UDP_ENCAPS_PORT sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-03sctp: delay auto_asconf init until binding the first addrXin Long1-14/+17
As Or Cohen described: If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock held and sp->do_auto_asconf is true, then an element is removed from the auto_asconf_splist without any proper locking. This can happen in the following functions: 1. In sctp_accept, if sctp_sock_migrate fails. 2. In inet_create or inet6_create, if there is a bpf program attached to BPF_CGROUP_INET_SOCK_CREATE which denies creation of the sctp socket. This patch is to fix it by moving the auto_asconf init out of sctp_init_sock(), by which inet_create()/inet6_create() won't need to operate it in sctp_destroy_sock() when calling sk_common_release(). It also makes more sense to do auto_asconf init while binding the first addr, as auto_asconf actually requires an ANY addr bind, see it in sctp_addr_wq_timeout_handler(). This addresses CVE-2021-23133. Fixes: 610236587600 ("bpf: Add new cgroup attach type to enable sock modifications") Reported-by: Or Cohen <orcohen@paloaltonetworks.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-03Revert "net/sctp: fix race condition in sctp_destroy_sock"Xin Long1-5/+8
This reverts commit b166a20b07382b8bc1dcee2a448715c9c2c81b5b. This one has to be reverted as it introduced a dead lock, as syzbot reported: CPU0 CPU1 ---- ---- lock(&net->sctp.addr_wq_lock); lock(slock-AF_INET6); lock(&net->sctp.addr_wq_lock); lock(slock-AF_INET6); CPU0 is the thread of sctp_addr_wq_timeout_handler(), and CPU1 is that of sctp_close(). The original issue this commit fixed will be fixed in the next patch. Reported-by: syzbot+959223586843e69a2674@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-8/+5
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c - keep the ZC code, drop the code related to reinit net/bridge/netfilter/ebtables.c - fix build after move to net_generic Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-13net/sctp: fix race condition in sctp_destroy_sockOr Cohen1-8/+5
If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock held and sp->do_auto_asconf is true, then an element is removed from the auto_asconf_splist without any proper locking. This can happen in the following functions: 1. In sctp_accept, if sctp_sock_migrate fails. 2. In inet_create or inet6_create, if there is a bpf program attached to BPF_CGROUP_INET_SOCK_CREATE which denies creation of the sctp socket. The bug is fixed by acquiring addr_wq_lock in sctp_destroy_sock instead of sctp_close. This addresses CVE-2021-23133. Reported-by: Or Cohen <orcohen@paloaltonetworks.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Fixes: 610236587600 ("bpf: Add new cgroup attach type to enable sock modifications") Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-28net: sctp: Fix some typosLu Wei1-1/+1
Modify "unkown" to "unknown" in net/sctp/sm_make_chunk.c and Modify "orginal" to "original" in net/sctp/socket.c. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Lu Wei <luwei32@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-30sctp: add udphdr to overhead when udp_port is setXin Long1-0/+1
sctp_mtu_payload() is for calculating the frag size before making chunks from a msg. So we should only add udphdr size to overhead when udp socks are listening, as only then sctp can handle the incoming sctp over udp packets and outgoing sctp over udp packets will be possible. Note that we can't do this according to transport->encap_port, as different transports may be set to different values, while the chunks were made before choosing the transport, we could not be able to meet all rfc6951#section-5.6 recommends. v1->v2: - Add udp_port for sctp_sock to avoid a potential race issue, it will be used in xmit path in the next patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-30sctp: add SCTP_REMOTE_UDP_ENCAPS_PORT sockoptXin Long1-0/+114
This patch is to implement: rfc6951#section-6.1: Get or Set the Remote UDP Encapsulation Port Number with the param of the struct: struct sctp_udpencaps { sctp_assoc_t sue_assoc_id; struct sockaddr_storage sue_address; uint16_t sue_port; }; the encap_port of sock, assoc or transport can be changed by users, which also means it allows the different transports of the same asoc to have different encap_port value. v1->v2: - no change. v2->v3: - fix the endian warning when setting values between encap_port and sue_port. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-30sctp: add encap_port for netns sock asoc and transportXin Long1-0/+1
encap_port is added as per netns/sock/assoc/transport, and the latter one's encap_port inherits the former one's by default. The transport's encap_port value would mostly decide if one packet should go out with udp encapsulated or not. This patch also allows users to set netns' encap_port by sysctl. v1->v2: - Change to define encap_port as __be16 for sctp_sock, asoc and transport. v2->v3: - No change. v3->v4: - Add 'encap_port' entry in ip-sysctl.rst. v4->v5: - Improve the description of encap_port in ip-sysctl.rst. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-20net: sctp: Fix IPv6 ancestor_size calc in sctp_copy_descendantHenry Ptasinski1-6/+3
When calculating ancestor_size with IPv6 enabled, simply using sizeof(struct ipv6_pinfo) doesn't account for extra bytes needed for alignment in the struct sctp6_sock. On x86, there aren't any extra bytes, but on ARM the ipv6_pinfo structure is aligned on an 8-byte boundary so there were 4 pad bytes that were omitted from the ancestor_size calculation. This would lead to corruption of the pd_lobby pointers, causing an oops when trying to free the sctp structure on socket close. Fixes: 636d25d557d1 ("sctp: not copy sctp_sock pd_lobby in sctp_copy_descendant") Signed-off-by: Henry Ptasinski <hptasinski@google.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24sctp: not disable bh in the whole sctp_get_port_local()Xin Long1-10/+6
With disabling bh in the whole sctp_get_port_local(), when snum == 0 and too many ports have been used, the do-while loop will take the cpu for a long time and cause cpu stuck: [ ] watchdog: BUG: soft lockup - CPU#11 stuck for 22s! [ ] RIP: 0010:native_queued_spin_lock_slowpath+0x4de/0x940 [ ] Call Trace: [ ] _raw_spin_lock+0xc1/0xd0 [ ] sctp_get_port_local+0x527/0x650 [sctp] [ ] sctp_do_bind+0x208/0x5e0 [sctp] [ ] sctp_autobind+0x165/0x1e0 [sctp] [ ] sctp_connect_new_asoc+0x355/0x480 [sctp] [ ] __sctp_connect+0x360/0xb10 [sctp] There's no need to disable bh in the whole function of sctp_get_port_local. So fix this cpu stuck by removing local_bh_disable() called at the beginning, and using spin_lock_bh() instead. The same thing was actually done for inet_csk_get_port() in Commit ea8add2b1903 ("tcp/dccp: better use of ephemeral ports in bind()"). Thanks to Marcelo for pointing the buggy code out. v1->v2: - use cond_resched() to yield cpu to other tasks if needed, as Eric noticed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 23:10:47 +0000