summaryrefslogtreecommitdiff
path: root/net/6lowpan
AgeCommit message (Collapse)AuthorFilesLines
2015-10-216lowpan: move IPHC functionality definesAlexander Aring2-1/+109
This patch removes the IPHC related defines for doing bit manipulation from global 6lowpan header to the iphc file which should the only one implementation which use these defines. Also move next header compression defines to their nhc implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-216lowpan: nhc: move iphc manipulation out of nhcAlexander Aring3-17/+14
This patch moves the iphc setting of next header commpression bit inside iphc functionality. Setting of IPHC bits should be happen at iphc.c file only. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-216lowpan: remove lowpan_fetch_skb_u8Alexander Aring1-2/+2
This patch removes the lowpan_fetch_skb_u8 function for getting the iphc bytes. Instead we using the generic which has a len parameter to tell the amount of bytes to fetch. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-216lowpan: cleanup lowpan_header_decompressAlexander Aring3-46/+73
This patch changes the lowpan_header_decompress function by removing inklayer related information from parameters. This is currently for supporting short and extended address for iphc handling in 802154. We don't support short address handling anyway right now, but there exists already code for handling short addresses in lowpan_header_decompress. The address parameters are also changed to a void pointer, so 6LoWPAN linklayer specific code can put complex structures as these parameters and cast it again inside the generic code by evaluating linklayer type before. The order is also changed by destination address at first and then source address, which is the same like all others functions where destination is always the first, memcpy, dev_hard_header, lowpan_header_compress, etc. This patch also moves the fetching of iphc values from 6LoWPAN linklayer specific code into the generic branch. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-216lowpan: cleanup lowpan_header_compressAlexander Aring1-10/+7
This patch changes the lowpan_header_compress function by removing unused parameters like "len" and drop static value parameters of protocol type. Instead we really check the protocol type inside inside the skb structure. Also we drop the use of IEEE802154_ADDR_LEN which is link-layer specific. Instead we using EUI64_ADDR_LEN which should always the default case for now. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-216lowpan: introduce LOWPAN_IPHC_MAX_HC_BUF_LENAlexander Aring1-1/+1
This patch introduces the LOWPAN_IPHC_MAX_HC_BUF_LEN define which represent the worst-case supported IPHC buffer length. It's used to allocate the stack buffer space for creating the IPHC header. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-086lowpan: move shared settings to lowpan_netdev_setupAlexander Aring1-0/+5
This patch moves values for all lowpan interface to the shared implementation of 6lowpan. This patch also quietly fixes the forgotten IFF_NO_QUEUE flag for the bluetooth 6LoWPAN interface. An identically commit is 4afbc0d ("net: 6lowpan: convert to using IFF_NO_QUEUE") which wasn't changed for bluetooth 6lowpan. All 6lowpan interfaces should be virtual with IFF_NO_QUEUE, using EUI64 address length, the mtu size is 1280 (IPV6_MIN_MTU) and the netdev type is ARPHRD_6LOWPAN. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22ieee802154: change needed headroom/tailroomAlexander Aring1-2/+0
This patch cleanups needed_headroom, needed_tailroom and hard_header_len fields for wpan and lowpan interfaces. For wpan interfaces the worst case mac header len should be part of needed_headroom, currently this is set as hard_header_len, but hard_header_len should be set to the minimum header length which xmit call assumes and this is the minimum frame length of 802.15.4. The hard_header_len value will check inside send callbacl of AF_PACKET raw sockets. For lowpan interfaces, if fragmentation isn't needed the skb will call dev_hard_header for 802154 layer and queue it afterwards. This happens without new skb allocation, so we need the same headroom and tailroom lengths like 802154 inside 802154 6lowpan layer. At least we assume as minimum header length an ipv6 header size. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17ieee820154: 6lowpan: dispatch evaluation reworkAlexander Aring2-2/+24
This patch complete reworks the evaluation of 6lowpan dispatch value by introducing a receive handler mechanism for each dispatch value. A list of changes: - Doing uncompression on-the-fly when FRAG1 is received, this require some special handling for 802.15.4 lltype in generic 6lowpan branch for setting the payload length correct. - Fix dispatch mask for fragmentation. - Add IPv6 dispatch evaluation for FRAG1. - Add skb_unshare for dispatch which might manipulate the skb data buffer. Cc: Jukka Rissanen <jukka.rissanen@linux.intel.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-116lowpan: move module_init into core functionalityAlexander Aring2-19/+20
This patch moves module_init of 6lowpan module into core functionality of 6lowpan module. To load the ipv6 module at probing of the 6lowpan module should be core functionality. Loading next header compression modules is iphc specific. Nevertheless we only support IPHC for the generic 6LoWPAN branch right now so we can put it into the core functionality. If possible new compression formats are introduced nhc should load only when iphc is build. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-116lowpan: add generic 6lowpan netdev private dataAlexander Aring2-1/+21
This patch introduced the 6lowpan netdev private data struct. We name it lowpan_priv and it's placed at the beginning of netdev private data. All lowpan interfaces should allocate this room at first of netdev private data. 6LoWPAN LL private data can be allocate by additional netdev private data, e.g. dev->priv_size should be "sizeof(struct lowpan_priv) + sizeof(LL_LOWPAN_PRIVATE_DATA)". Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-106lowpan: Fix extraction of flow label fieldLukasz Duda1-1/+1
The lowpan_fetch_skb function is used to fetch the first byte, which also increments the data pointer in skb structure, making subsequent array lookup of byte 0 actually being byte 1. To decompress the first byte of the Flow Label when the TF flag is set to 0x01, the second half of the first byte is needed. The patch fixes the extraction of the Flow Label field. Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no> Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-236lowpan: add request for ipv6 moduleAlexander Aring1-0/+2
The iphc module depends on CONFIG_IPV6, because it's not very useful to build the module without IPv6 support. Recently an user reported about issues for setting an IPv6 address to a 6LoWPAN interface. The issues was solved by modprobe the ipv6 module before. To avoid such user issues we try to request the ipv6 module when the 6LoWPAN module is loaded. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-146lowpan: nhc: add other known rfc6282 compressionsAlexander Aring9-0/+213
This patch adds other known rfc6282 compression formats to the nhc framework. These compression formats are known but not implemented yet. For now this is useful to printout a warning which compression format isn't supported. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Martin Townsend <mtownsend1973@gmail.com> Reviewed-by: Stefan Schmidt <s.schmidt@samsung.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-146lowpan: add udp compression via nhc layerAlexander Aring4-170/+205
This patch move UDP header compression and uncompression into the generic 6LoWPAN nhc header compression layer. Moreover this patch activates the nhc layer compression in iphc compression and uncompression functions. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Martin Townsend <mtownsend1973@gmail.com> Reviewed-by: Stefan Schmidt <s.schmidt@samsung.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-146lowpan: add generic nhc layer interfaceAlexander Aring3-1/+388
This patch adds a generic next header compression layer interface. There exists various methods to do a header compression after 6LoWPAN header to save payload. This introduce a generic nhc header which allow a simple adding of a new header compression format instead of a static implementation inside the 6LoWPAN header compression and uncompression function. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Martin Townsend <mtownsend1973@gmail.com> Reviewed-by: Stefan Schmidt <s.schmidt@samsung.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-12-05net/6lowpan: Remove FSF address from GPL statement.Stefan Schmidt1-3/+0
This might change and we already deliver a copy of the license with the kernel. This was already removed form the ieee802154 code but missed here. Signed-off-by: Stefan Schmidt <s.schmidt@samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-066lowpan: move skb_free from error paths in decompressionMartin Townsend1-19/+12
Currently we ensure that the skb is freed on every error path in IPHC decompression which makes it easy to introduce skb leaks. By centralising the skb_free into the receive function it makes future decompression routines easier to maintain. It does come at the expense of ensuring that the skb passed into the decompression routine must not be copied. Signed-off-by: Martin Townsend <mtownsend1973@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-046lowpan: fix udp header compression when using raw socketsSimon Vincent1-1/+9
If you use RAW sockets the transport header offset is not set by the ipv6 stack so when we get to the udp header compression it does not compress the right part of the packet. This patch adds a check for this scenario and sets the transport header offset. Signed-off-by: Simon Vincent <simon.vincent@xsilon.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27ieee802154: 6lowpan: rename process_data and lowpan_process_dataMartin Townsend1-5/+7
As we have decouple decompression from data delivery we can now rename all occurences of process_data in receive path. Signed-off-by: Martin Townsend <mtownsend1973@gmail.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-276lowpan: remove skb_deliver from IPHCMartin Townsend1-26/+6
Separating skb delivery from decompression ensures that we can support further decompression schemes and removes the mixed return value of error codes with NET_RX_FOO. Signed-off-by: Martin Townsend <mtownsend1973@gmail.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-256lowpan: Use skb_cow in IPHC decompression.Martin Townsend1-26/+21
Currently there are potentially 2 skb_copy_expand calls in IPHC decompression. This patch replaces this with one call to skb_cow which will check to see if there is enough headroom first to ensure it's only done if necessary and will handle alignment issues for cache. As skb_cow uses pskb_expand_head we ensure the skb isn't shared from bluetooth and ieee802.15.4 code that use the IPHC decompression. Signed-off-by: Martin Townsend <martin.townsend@xsilon.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-08-076lowpan: Allow 6LoWPAN to be modularGeert Uytterhoeven1-1/+1
Change config symbol 6LOWPAN from type bool to type tristate, so 6LoWPAN can be built modular, just like IPV6 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05Merge tag 'master-2014-07-31' of ↵David S. Miller1-107/+105
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next Conflicts: net/6lowpan/iphc.c Minor conflicts in iphc.c were changes overlapping with some style cleanups. John W. Linville says: ==================== Please pull this last(?) batch of wireless change intended for the 3.17 stream... For the NFC bits, Samuel says: "This is a rather quiet one, we have: - A new driver from ST Microelectronics for their NCI ST21NFCB, including device tree support. - p2p support for the ST21NFCA driver - A few fixes an enhancements for the NFC digital laye" For the Atheros bits, Kalle says: "Michal and Janusz did some important RX aggregation fixes, basically we were missing RX reordering altogether. The 10.1 firmware doesn't support Ad-Hoc mode and Michal fixed ath10k so that it doesn't advertise Ad-Hoc support with that firmware. Also he implemented a workaround for a KVM issue." For the Bluetooth bits, Gustavo and Johan say: "To quote Gustavo from his previous request: 'Some last minute fixes for -next. We have a fix for a use after free in RFCOMM, another fix to an issue with ADV_DIRECT_IND and one for ADV_IND with auto-connection handling. Last, we added support for reading the codec and MWS setting for controllers that support these features.' Additionally there are fixes to LE scanning, an update to conform to the 4.1 core specification as well as fixes for tracking the page scan state. All of these fixes are important for 3.17." And, "We've got: - 6lowpan fixes/cleanups - A couple crash fixes, one for the Marvell HCI driver and another in LE SMP. - Fix for an incorrect connected state check - Fix for the bondable requirement during pairing (an issue which had crept in because of using "pairable" when in fact the actual meaning was "bondable" (these have different meanings in Bluetooth)" Along with those are some late-breaking hardware support patches in brcmfmac and b43 as well as a stray ath9k patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-306lowpan: iphc: Fix parenthesis alignments which off-by-oneMarcel Holtmann1-3/+3
CHECK: Alignment should match open parenthesis + if (((hdr->flow_lbl[0] & 0x0F) == 0) && + (hdr->flow_lbl[1] == 0) && (hdr->flow_lbl[2] == 0)) { CHECK: Alignment should match open parenthesis + if ((hdr->priority == 0) && + ((hdr->flow_lbl[0] & 0xF0) == 0)) { CHECK: Alignment should match open parenthesis + if ((hdr->priority == 0) && + ((hdr->flow_lbl[0] & 0xF0) == 0)) { Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-306lowpan: iphc: Fix missing braces for if statementMarcel Holtmann1-2/+2
CHECK: braces {} should be used on all arms of this statement + if ((iphc0 & 0x03) != LOWPAN_IPHC_TTL_I) [...] + else { [...] Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-306lowpan: iphc: Fix missing blank line after variable declarationsMarcel Holtmann1-0/+1
WARNING: Missing a blank line after declarations + struct sk_buff *new; + if (uncompress_udp_header(skb, &uh)) Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-306lowpan: iphc: Fix issues with alignment matching open parenthesisMarcel Holtmann1-39/+35
This patch fixes all the issues with alignment matching of open parenthesis found by checkpatch.pl and makes them follow the network coding style now. CHECK: Alignment should match open parenthesis +static int uncompress_addr(struct sk_buff *skb, + struct in6_addr *ipaddr, const u8 address_mode, CHECK: Alignment should match open parenthesis +static int uncompress_context_based_src_addr(struct sk_buff *skb, + struct in6_addr *ipaddr, CHECK: Alignment should match open parenthesis +static int skb_deliver(struct sk_buff *skb, struct ipv6hdr *hdr, + struct net_device *dev, skb_delivery_cb deliver_skb) CHECK: Alignment should match open parenthesis + new = skb_copy_expand(skb, sizeof(struct ipv6hdr), skb_tailroom(skb), + GFP_ATOMIC); CHECK: Alignment should match open parenthesis + raw_dump_table(__func__, "raw skb data dump before receiving", + new->data, new->len); CHECK: Alignment should match open parenthesis +lowpan_uncompress_multicast_daddr(struct sk_buff *skb, + struct in6_addr *ipaddr, CHECK: Alignment should match open parenthesis + raw_dump_inline(NULL, "Reconstructed ipv6 multicast addr is", + ipaddr->s6_addr, 16); CHECK: Alignment should match open parenthesis +int lowpan_process_data(struct sk_buff *skb, struct net_device *dev, + const u8 *saddr, const u8 saddr_type, const u8 saddr_len, CHECK: Alignment should match open parenthesis + raw_dump_table(__func__, "raw skb data dump uncompressed", + skb->data, skb->len); CHECK: Alignment should match open parenthesis + err = uncompress_addr(skb, &hdr.saddr, tmp, saddr, + saddr_type, saddr_len); CHECK: Alignment should match open parenthesis + err = uncompress_addr(skb, &hdr.daddr, tmp, daddr, + daddr_type, daddr_len); CHECK: Alignment should match open parenthesis + pr_debug("dest: stateless compression mode %d dest %pI6c\n", + tmp, &hdr.daddr); CHECK: Alignment should match open parenthesis + raw_dump_table(__func__, "raw UDP header dump", + (u8 *)&uh, sizeof(uh)); CHECK: Alignment should match open parenthesis + raw_dump_table(__func__, "raw header dump", (u8 *)&hdr, + sizeof(hdr)); CHECK: Alignment should match open parenthesis +int lowpan_header_compress(struct sk_buff *skb, struct net_device *dev, + unsigned short type, const void *_daddr, CHECK: Alignment should match open parenthesis + raw_dump_table(__func__, "raw skb network header dump", + skb_network_header(skb), sizeof(struct ipv6hdr)); CHECK: Alignment should match open parenthesis + raw_dump_table(__func__, + "sending raw skb network uncompressed packet", CHECK: Alignment should match open parenthesis + if (((hdr->flow_lbl[0] & 0x0F) == 0) && + (hdr->flow_lbl[1] == 0) && (hdr->flow_lbl[2] == 0)) { WARNING: quoted string split across lines + pr_debug("dest address unicast link-local %pI6c " + "iphc1 0x%02x\n", &hdr->daddr, iphc1); CHECK: Alignment should match open parenthesis + raw_dump_table(__func__, "raw skb data dump compressed", + skb->data, skb->len); Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-306lowpan: iphc: Fix block comments to match networking styleMarcel Holtmann1-22/+11
This patch fixes all the block comment issues found by checkpatch.pl and makes them match the network style now. WARNING: networking block comments don't use an empty /* line, use /* Comment... +/* + * Based on patches from Jon Smirl <jonsmirl@gmail.com> WARNING: networking block comments don't use an empty /* line, use /* Comment... +/* + * Uncompress address function for source and WARNING: networking block comments don't use an empty /* line, use /* Comment... +/* + * Uncompress address function for source context WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * UDP lenght needs to be infered from the lower layers WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * Traffic Class and FLow Label carried in-line WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * Traffic class carried in-line WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * Flow Label carried in-line WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * replace the compressed UDP head by the uncompressed UDP WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * As we copy some bit-length fields, in the IPHC encoding bytes, WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * Traffic class, flow label WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * Hop limit Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-306lowpan: iphc: remove check on nullAlexander Aring1-3/+0
This memory is placed on stack and can't be null so remove the check on null. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-306lowpan: iphc: use ipv6 api to check address scopeAlexander Aring1-12/+17
This patch removes the own implementation to check of link-layer, broadcast and any address type and use the IPv6 api for that. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-306lowpan: iphc: cleanup use of lowpan_push_hc_dataAlexander Aring1-25/+20
This patch uses the lowpan_push_hc_data functions in several places where we can use it. The lowpan_push_hc_data was introduced in some previous patches. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-306lowpan: iphc: cleanup use of lowpan_fetch_skbAlexander Aring1-6/+7
We introduced the lowpan_fetch_skb function in some previous patches for 6lowpan to have a generic fetch function. This patch drops the old function and use the generic lowpan_fetch_skb one. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-306lowpan: iphc: use sizeof in udp uncompressionAlexander Aring1-9/+14
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-306lowpan: iphc: rename hc06_ptr pointer to hc_ptrAlexander Aring1-56/+56
The hc06_ptr pointer variable stands for header compression draft-06. We are mostly rfc complaint. This patch rename the variable to normal hc_ptr. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-28Merge tag 'master-2014-07-25' of ↵David S. Miller3-0/+800
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-07-25 Please pull this batch of updates intended for the 3.17 stream! For the mac80211 bits, Johannes says: "We have a lot of TDLS patches, among them a fix that should make hwsim tests happy again. The rest, this time, is mostly small fixes." For the Bluetooth bits, Gustavo says: "Some more patches for 3.17. The most important change here is the move of the 6lowpan code to net/6lowpan. It has been agreed with Davem that this change will go through the bluetooth tree. The rest are mostly clean up and fixes." and, "Here follows some more patches for 3.17. These are mostly fixes to what we've sent to you before for next merge window." For the iwlwifi bits, Emmanuel says: "I have the usual amount of BT Coex stuff. Arik continues to work on TDLS and Ariej contributes a few things for HS2.0. I added a few more things to the firmware debugging infrastructure. Eran fixes a small bug - pretty normal content." And for the Atheros bits, Kalle says: "For ath6kl me and Jessica added support for ar6004 hw3.0, our latest version of ar6004. For ath10k Janusz added a printout so that it's easier to check what ath10k kconfig options are enabled. He also added a debugfs file to configure maximum amsdu and ampdu values. Also we had few fixes as usual." On top of that is the usual large batch of various driver updates -- brcmfmac, mwifiex, the TI drivers, and wil6210 all get some action. Rafał has also been very busy with b43 and related updates. Also, I pulled the wireless tree into this in order to resolve a merge conflict... P.S. The change to fs/compat_ioctl.c reflects a name change in a Bluetooth header file... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-126lowpan: introduce new net/6lowpan directoryAlexander Aring3-0/+810
This patch moves generic code which is used by bluetooth and ieee802154 6lowpan to a new net/6lowpan directory. This directory contains generic 6LoWPAN code which is shared between bluetooth and ieee802154 MAC-Layer. This is the IPHC - "IPv6 Header Compression" format at the moment. Which is described by RFC 6282 [0]. The BLTE 6LoWPAN draft describes that the IPHC is the same format like IEEE 802.15.4, see [1]. Futuremore we can put more code into this directory which is shared between BLTE and IEEE 802.15.4 6LoWPAN like RFC 6775 or the routing protocol RPL RFC 6550. To avoid naming conflicts I renamed 6lowpan-y to ieee802154_6lowpan-y in net/ieee802154/Makefile. [0] http://tools.ietf.org/html/rfc6282 [1] http://tools.ietf.org/html/draft-ietf-6lowpan-btle-12#section-3.2 [2] http://tools.ietf.org/html/rfc6775 [3] http://tools.ietf.org/html/rfc6550 Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 01:35:27 +0000