summaryrefslogtreecommitdiff
path: root/mm/slub.c
AgeCommit message (Collapse)AuthorFilesLines
2021-05-22kasan: slab: always reset the tag in get_freepointer_safe()Alexander Potapenko1-0/+1
With CONFIG_DEBUG_PAGEALLOC enabled, the kernel should also untag the object pointer, as done in get_freepointer(). Failing to do so reportedly leads to SLUB freelist corruptions that manifest as boot-time crashes. Link: https://lkml.kernel.org/r/20210514072228.534418-1-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Elliot Berman <eberman@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-14mm, slub: move slub_debug static key enabling outside slab_mutexVlastimil Babka1-9/+0
Paul E. McKenney reported [1] that commit 1f0723a4c0df ("mm, slub: enable slub_debug static key when creating cache with explicit debug flags") results in the lockdep complaint: ====================================================== WARNING: possible circular locking dependency detected 5.12.0+ #15 Not tainted ------------------------------------------------------ rcu_torture_sta/109 is trying to acquire lock: ffffffff96063cd0 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_enable+0x9/0x20 but task is already holding lock: ffffffff96173c28 (slab_mutex){+.+.}-{3:3}, at: kmem_cache_create_usercopy+0x2d/0x250 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (slab_mutex){+.+.}-{3:3}: lock_acquire+0xb9/0x3a0 __mutex_lock+0x8d/0x920 slub_cpu_dead+0x15/0xf0 cpuhp_invoke_callback+0x17a/0x7c0 cpuhp_invoke_callback_range+0x3b/0x80 _cpu_down+0xdf/0x2a0 cpu_down+0x2c/0x50 device_offline+0x82/0xb0 remove_cpu+0x1a/0x30 torture_offline+0x80/0x140 torture_onoff+0x147/0x260 kthread+0x10a/0x140 ret_from_fork+0x22/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: check_prev_add+0x8f/0xbf0 __lock_acquire+0x13f0/0x1d80 lock_acquire+0xb9/0x3a0 cpus_read_lock+0x21/0xa0 static_key_enable+0x9/0x20 __kmem_cache_create+0x38d/0x430 kmem_cache_create_usercopy+0x146/0x250 kmem_cache_create+0xd/0x10 rcu_torture_stats+0x79/0x280 kthread+0x10a/0x140 ret_from_fork+0x22/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(slab_mutex); lock(cpu_hotplug_lock); lock(slab_mutex); lock(cpu_hotplug_lock); *** DEADLOCK *** 1 lock held by rcu_torture_sta/109: #0: ffffffff96173c28 (slab_mutex){+.+.}-{3:3}, at: kmem_cache_create_usercopy+0x2d/0x250 stack backtrace: CPU: 3 PID: 109 Comm: rcu_torture_sta Not tainted 5.12.0+ #15 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: dump_stack+0x6d/0x89 check_noncircular+0xfe/0x110 ? lock_is_held_type+0x98/0x110 check_prev_add+0x8f/0xbf0 __lock_acquire+0x13f0/0x1d80 lock_acquire+0xb9/0x3a0 ? static_key_enable+0x9/0x20 ? mark_held_locks+0x49/0x70 cpus_read_lock+0x21/0xa0 ? static_key_enable+0x9/0x20 static_key_enable+0x9/0x20 __kmem_cache_create+0x38d/0x430 kmem_cache_create_usercopy+0x146/0x250 ? rcu_torture_stats_print+0xd0/0xd0 kmem_cache_create+0xd/0x10 rcu_torture_stats+0x79/0x280 ? rcu_torture_stats_print+0xd0/0xd0 kthread+0x10a/0x140 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 This is because there's one order of locking from the hotplug callbacks: lock(cpu_hotplug_lock); // from hotplug machinery itself lock(slab_mutex); // in e.g. slab_mem_going_offline_callback() And commit 1f0723a4c0df made the reverse sequence possible: lock(slab_mutex); // in kmem_cache_create_usercopy() lock(cpu_hotplug_lock); // kmem_cache_open() -> static_key_enable() The simplest fix is to move static_key_enable() to a place before slab_mutex is taken. That means kmem_cache_create_usercopy() in mm/slab_common.c which is not ideal for SLUB-specific code, but the #ifdef CONFIG_SLUB_DEBUG makes it at least self-contained and obvious. [1] https://lore.kernel.org/lkml/20210502171827.GA3670492@paulmck-ThinkPad-P17-Gen-1/ Link: https://lkml.kernel.org/r/20210504120019.26791-1-vbabka@suse.cz Fixes: 1f0723a4c0df ("mm, slub: enable slub_debug static key when creating cache with explicit debug flags") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Paul E. McKenney <paulmck@kernel.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-07mm: fix typos in commentsIngo Molnar1-1/+1
Fix ~94 single-word typos in locking code comments, plus a few very obvious grammar mistakes. Link: https://lkml.kernel.org/r/20210322212624.GA1963421@gmail.com Link: https://lore.kernel.org/r/20210322205203.GB1959563@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30kasan, mm: integrate slab init_on_free with HW_TAGSAndrey Konovalov1-19/+24
This change uses the previously added memory initialization feature of HW_TAGS KASAN routines for slab memory when init_on_free is enabled. With this change, memory initialization memset() is no longer called when both HW_TAGS KASAN and init_on_free are enabled. Instead, memory is initialized in KASAN runtime. For SLUB, the memory initialization memset() is moved into slab_free_hook() that currently directly follows the initialization loop. A new argument is added to slab_free_hook() that indicates whether to initialize the memory or not. To avoid discrepancies with which memory gets initialized that can be caused by future changes, both KASAN hook and initialization memset() are put together and a warning comment is added. Combining setting allocation tags with memory initialization improves HW_TAGS KASAN performance when init_on_free is enabled. Link: https://lkml.kernel.org/r/190fd15c1886654afdec0d19ebebd5ade665b601.1615296150.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30kasan, mm: integrate slab init_on_alloc with HW_TAGSAndrey Konovalov1-16/+11
This change uses the previously added memory initialization feature of HW_TAGS KASAN routines for slab memory when init_on_alloc is enabled. With this change, memory initialization memset() is no longer called when both HW_TAGS KASAN and init_on_alloc are enabled. Instead, memory is initialized in KASAN runtime. The memory initialization memset() is moved into slab_post_alloc_hook() that currently directly follows the initialization loop. A new argument is added to slab_post_alloc_hook() that indicates whether to initialize the memory or not. To avoid discrepancies with which memory gets initialized that can be caused by future changes, both KASAN hook and initialization memset() are put together and a warning comment is added. Combining setting allocation tags with memory initialization improves HW_TAGS KASAN performance when init_on_alloc is enabled. Link: https://lkml.kernel.org/r/c1292aeb5d519da221ec74a0684a949b027d7720.1615296150.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30mm/slub.c: trivial typo fixesBhaskar Chowdhury1-4/+4
s/operatios/operations/ s/Mininum/Minimum/ s/mininum/minimum/ ......two different places. Link: https://lkml.kernel.org/r/20210325044940.14516-1-unixbhaskar@gmail.com Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30mm, slub: enable slub_debug static key when creating cache with explicit ↵Vlastimil Babka1-0/+9
debug flags Commit ca0cab65ea2b ("mm, slub: introduce static key for slub_debug()") introduced a static key to optimize the case where no debugging is enabled for any cache. The static key is enabled when slub_debug boot parameter is passed, or CONFIG_SLUB_DEBUG_ON enabled. However, some caches might be created with one or more debugging flags explicitly passed to kmem_cache_create(), and the commit missed this. Thus the debugging functionality would not be actually performed for these caches unless the static key gets enabled by boot param or config. This patch fixes it by checking for debugging flags passed to kmem_cache_create() and enabling the static key accordingly. Note such explicit debugging flags should not be used outside of debugging and testing as they will now enable the static key globally. btrfs_init_cachep() creates a cache with SLAB_RED_ZONE but that's a mistake that's being corrected [1]. rcu_torture_stats() creates a cache with SLAB_STORE_USER, but that is a testing module so it's OK and will start working as intended after this patch. Also note that in case of backports to kernels before v5.12 that don't have 59450bbc12be ("mm, slab, slub: stop taking cpu hotplug lock"), static_branch_enable_cpuslocked() should be used. [1] https://lore.kernel.org/linux-btrfs/20210315141824.26099-1-dsterba@suse.com/ Link: https://lkml.kernel.org/r/20210315153415.24404-1-vbabka@suse.cz Fixes: ca0cab65ea2b ("mm, slub: introduce static key for slub_debug()") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Oliver Glitta <glittao@gmail.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-28Merge tag 'core-rcu-2021-04-28' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: - Support for "N" as alias for last bit in bitmap parsing library (eg using syntax like "nohz_full=2-N") - kvfree_rcu updates - mm_dump_obj() updates. (One of these is to mm, but was suggested by Andrew Morton.) - RCU callback offloading update - Polling RCU grace-period interfaces - Realtime-related RCU updates - Tasks-RCU updates - Torture-test updates - Torture-test scripting updates - Miscellaneous fixes * tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits) rcutorture: Test start_poll_synchronize_rcu() and poll_state_synchronize_rcu() rcu: Provide polling interfaces for Tiny RCU grace periods torture: Fix kvm.sh --datestamp regex check torture: Consolidate qemu-cmd duration editing into kvm-transform.sh torture: Print proper vmlinux path for kvm-again.sh runs torture: Make TORTURE_TRUST_MAKE available in kvm-again.sh environment torture: Make kvm-transform.sh update jitter commands torture: Add --duration argument to kvm-again.sh torture: Add kvm-again.sh to rerun a previous torture-test torture: Create a "batches" file for build reuse torture: De-capitalize TORTURE_SUITE torture: Make upper-case-only no-dot no-slash scenario names official torture: Rename SRCU-t and SRCU-u to avoid lowercase characters torture: Remove no-mpstat error message torture: Record kvm-test-1-run.sh and kvm-test-1-run-qemu.sh PIDs torture: Record jitter start/stop commands torture: Extract kvm-test-1-run-qemu.sh from kvm-test-1-run.sh torture: Record TORTURE_KCONFIG_GDB_ARG in qemu-cmd torture: Abstract jitter.sh start/stop into scripts rcu: Provide polling interfaces for Tree RCU grace periods ...
2021-04-27Merge tag 'printk-for-5.13' of ↵Linus Torvalds1-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Stop synchronizing kernel log buffer readers by logbuf_lock. As a result, the access to the buffer is fully lockless now. Note that printk() itself still uses locks because it tries to flush the messages to the console immediately. Also the per-CPU temporary buffers are still there because they prevent infinite recursion and serialize backtraces from NMI. All this is going to change in the future. - kmsg_dump API rework and cleanup as a side effect of the logbuf_lock removal. - Make bstr_printf() aware that %pf and %pF formats could deference the given pointer. - Show also page flags by %pGp format. - Clarify the documentation for plain pointer printing. - Do not show no_hash_pointers warning multiple times. - Update Senozhatsky email address. - Some clean up. * tag 'printk-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (24 commits) lib/vsprintf.c: remove leftover 'f' and 'F' cases from bstr_printf() printk: clarify the documentation for plain pointer printing kernel/printk.c: Fixed mundane typos printk: rename vprintk_func to vprintk vsprintf: dump full information of page flags in pGp mm, slub: don't combine pr_err with INFO mm, slub: use pGp to print page flags MAINTAINERS: update Senozhatsky email address lib/vsprintf: do not show no_hash_pointers message multiple times printk: console: remove unnecessary safe buffer usage printk: kmsg_dump: remove _nolock() variants printk: remove logbuf_lock printk: introduce a kmsg_dump iterator printk: kmsg_dumper: remove @active field printk: add syslog_lock printk: use atomic64_t for devkmsg_user.seq printk: use seqcount_latch for clear_seq printk: introduce CONSOLE_LOG_MAX printk: consolidate kmsg_dump_get_buffer/syslog_print_all code printk: refactor kmsg_dump_get_buffer() ...
2021-04-11Merge branch 'for-mingo-rcu' of ↵Ingo Molnar1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU changes from Paul E. McKenney: - Bitmap support for "N" as alias for last bit - kvfree_rcu updates - mm_dump_obj() updates. (One of these is to mm, but was suggested by Andrew Morton.) - RCU callback offloading update - Polling RCU grace-period interfaces - Realtime-related RCU updates - Tasks-RCU updates - Torture-test updates - Torture-test scripting updates - Miscellaneous fixes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-03-19mm, slub: don't combine pr_err with INFOYafang Shao1-5/+5
It is strange to combine "pr_err" with "INFO", so let's remove the prefix completely. This patch is motivated by David's comment[1]. - before the patch [ 8846.517809] INFO: Slab 0x00000000f42a2c60 objects=33 used=3 fp=0x0000000060d32ca8 flags=0x17ffffc0010200(slab|head) - after the patch [ 6343.396602] Slab 0x000000004382e02b objects=33 used=3 fp=0x000000009ae06ffc flags=0x17ffffc0010200(slab|head) [1] https://lore.kernel.org/linux-mm/b9c0f2b6-e9b0-0c36-ebdd-2bc684c5a762@redhat.com/#t Suggested-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Matthew Wilcox <willy@infradead.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210319101246.73513-3-laoar.shao@gmail.com
2021-03-19mm, slub: use pGp to print page flagsYafang Shao1-2/+3
As pGp has been already introduced in printk, we'd better use it to make the output human readable. Before this change, the output is, [ 6155.716018] INFO: Slab 0x000000004027dd4f objects=33 used=3 fp=0x000000008cd1579c flags=0x17ffffc0010200 While after this change, the output is, [ 8846.517809] INFO: Slab 0x00000000f42a2c60 objects=33 used=3 fp=0x0000000060d32ca8 flags=0x17ffffc0010200(slab|head) Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Christoph Lameter <cl@linux.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210319101246.73513-2-laoar.shao@gmail.com
2021-03-10Revert "mm, slub: consider rest of partial list if acquire_slab() fails"Linus Torvalds1-1/+1
This reverts commit 8ff60eb052eeba95cfb3efe16b08c9199f8121cf. The kernel test robot reports a huge performance regression due to the commit, and the reason seems fairly straightforward: when there is contention on the page list (which is what causes acquire_slab() to fail), we do _not_ want to just loop and try again, because that will transfer the contention to the 'n->list_lock' spinlock we hold, and just make things even worse. This is admittedly likely a problem only on big machines - the kernel test robot report comes from a 96-thread dual socket Intel Xeon Gold 6252 setup, but the regression there really is quite noticeable: -47.9% regression of stress-ng.rawpkt.ops_per_sec and the commit that was marked as being fixed (7ced37197196: "slub: Acquire_slab() avoid loop") actually did the loop exit early very intentionally (the hint being that "avoid loop" part of that commit message), exactly to avoid this issue. The correct thing to do may be to pick some kind of reasonable middle ground: instead of breaking out of the loop on the very first sign of contention, or trying over and over and over again, the right thing may be to re-try _once_, and then give up on the second failure (or pick your favorite value for "once"..). Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/lkml/20210301080404.GF12822@xsang-OptiPlex-9020/ Cc: Jann Horn <jannh@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-08mm: Don't build mm_dump_obj() on CONFIG_PRINTK=n kernelsPaul E. McKenney1-0/+2
The mem_dump_obj() functionality adds a few hundred bytes, which is a small price to pay. Except on kernels built with CONFIG_PRINTK=n, in which mem_dump_obj() messages will be suppressed. This commit therefore makes mem_dump_obj() be a static inline empty function on kernels built with CONFIG_PRINTK=n and excludes all of its support functions as well. This avoids kernel bloat on systems that cannot use mem_dump_obj(). Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <linux-mm@kvack.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-02-26kasan, mm: optimize kmalloc poisoningAndrey Konovalov1-2/+1
For allocations from kmalloc caches, kasan_kmalloc() always follows kasan_slab_alloc(). Currenly, both of them unpoison the whole object, which is unnecessary. This patch provides separate implementations for both annotations: kasan_slab_alloc() unpoisons the whole object, and kasan_kmalloc() only poisons the redzone. For generic KASAN, the redzone start might not be aligned to KASAN_GRANULE_SIZE. Therefore, the poisoning is split in two parts: kasan_poison_last_granule() poisons the unaligned part, and then kasan_poison() poisons the rest. This patch also clarifies alignment guarantees of each of the poisoning functions and drops the unnecessary round_up() call for redzone_end. With this change, the early SLUB cache annotation needs to be changed to kasan_slab_alloc(), as kasan_kmalloc() doesn't unpoison objects now. The number of poisoned bytes for objects in this cache stays the same, as kmem_cache_node->object_size is equal to sizeof(struct kmem_cache_node). Link: https://lkml.kernel.org/r/7e3961cb52be380bc412860332063f5f7ce10d13.1612546384.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm, kfence: insert KFENCE hooks for SLUBAlexander Potapenko1-14/+46
Inserts KFENCE hooks into the SLUB allocator. To pass the originally requested size to KFENCE, add an argument 'orig_size' to slab_alloc*(). The additional argument is required to preserve the requested original size for kmalloc() allocations, which uses size classes (e.g. an allocation of 272 bytes will return an object of size 512). Therefore, kmem_cache::size does not represent the kmalloc-caller's requested size, and we must introduce the argument 'orig_size' to propagate the originally requested size to KFENCE. Without the originally requested size, we would not be able to detect out-of-bounds accesses for objects placed at the end of a KFENCE object page if that object is not equal to the kmalloc-size class it was bucketed into. When KFENCE is disabled, there is no additional overhead, since slab_alloc*() functions are __always_inline. Link: https://lkml.kernel.org/r/20201103175841.3495947-6-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Jann Horn <jannh@google.com> Co-developed-by: Marco Elver <elver@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joern Engel <joern@purestorage.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: SeongJae Park <sjpark@amazon.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24kasan: move _RET_IP_ to inline wrappersAndrey Konovalov1-2/+2
Generic mm functions that call KASAN annotations that might report a bug pass _RET_IP_ to them as an argument. This allows KASAN to include the name of the function that called the mm function in its report's header. Now that KASAN has inline wrappers for all of its annotations, move _RET_IP_ to those wrappers to simplify annotation call sites. Link: https://linux-review.googlesource.com/id/I8fb3c06d49671305ee184175a39591bc26647a67 Link: https://lkml.kernel.org/r/5c1490eddf20b436b8c4eeea83fce47687d5e4a4.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24mm: memcontrol: fix slub memory accountingMuchun Song1-4/+4
SLUB currently account kmalloc() and kmalloc_node() allocations larger than order-1 page per-node. But it forget to update the per-memcg vmstats. So it can lead to inaccurate statistics of "slab_unreclaimable" which is from memory.stat. Fix it by using mod_lruvec_page_state instead of mod_node_page_state. Link: https://lkml.kernel.org/r/20210223092423.42420-1-songmuchun@bytedance.com Fixes: 6a486c0ad4dc ("mm, sl[ou]b: improve memory accounting") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Roman Gushchin <guro@fb.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24mm: memcg/slab: pre-allocate obj_cgroups for slab caches with SLAB_ACCOUNTRoman Gushchin1-1/+1
In general it's unknown in advance if a slab page will contain accounted objects or not. In order to avoid memory waste, an obj_cgroup vector is allocated dynamically when a need to account of a new object arises. Such approach is memory efficient, but requires an expensive cmpxchg() to set up the memcg/objcgs pointer, because an allocation can race with a different allocation on another cpu. But in some common cases it's known for sure that a slab page will contain accounted objects: if the page belongs to a slab cache with a SLAB_ACCOUNT flag set. It includes such popular objects like vm_area_struct, anon_vma, task_struct, etc. In such cases we can pre-allocate the objcgs vector and simple assign it to the page without any atomic operations, because at this early stage the page is not visible to anyone else. A very simplistic benchmark (allocating 10000000 64-bytes objects in a row) shows ~15% win. In the real life it seems that most workloads are not very sensitive to the speed of (accounted) slab allocations. [guro@fb.com: open-code set_page_objcgs() and add some comments, by Johannes] Link: https://lkml.kernel.org/r/20201113001926.GA2934489@carbon.dhcp.thefacebook.com [akpm@linux-foundation.org: fix it for mm-slub-call-account_slab_page-after-slab-page-initialization-fix.patch] Link: https://lkml.kernel.org/r/20201110195753.530157-2-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24mm/slub: minor coding style tweaksZhiyuan Dai1-1/+1
Add whitespace to fix coding style issues, improve code reading. Link: https://lkml.kernel.org/r/1612847403-5594-1-git-send-email-daizhiyuan@phytium.com.cn Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24mm, slub: remove slub_memcg_sysfs boot param and CONFIG_SLUB_MEMCG_SYSFS_ONVlastimil Babka1-16/+0
The boot param and config determine the value of memcg_sysfs_enabled, which is unused since commit 10befea91b61 ("mm: memcg/slab: use a single set of kmem_caches for all allocations") as there are no per-memcg kmem caches anymore. Link: https://lkml.kernel.org/r/20210127124745.7928-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24mm, slub: splice cpu and page freelists in deactivate_slab()Vlastimil Babka1-35/+24
In deactivate_slab() we currently move all but one objects on the cpu freelist to the page freelist one by one using the costly cmpxchg_double() operation. Then we unfreeze the page while moving the last object on page freelist, with a final cmpxchg_double(). This can be optimized to avoid the cmpxchg_double() per object. Just count the objects on cpu freelist (to adjust page->inuse properly) and also remember the last object in the chain. Then splice page->freelist to the last object and effectively add the whole cpu freelist to page->freelist while unfreezing the page, with a single cmpxchg_double(). Link: https://lkml.kernel.org/r/20210115183543.15097-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Jann Horn <jannh@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24mm, slab, slub: stop taking memory hotplug lockVlastimil Babka1-3/+25
Since commit 03afc0e25f7f ("slab: get_online_mems for kmem_cache_{create,destroy,shrink}") we are taking memory hotplug lock for SLAB and SLUB when creating, destroying or shrinking a cache. It is quite a heavy lock and it's best to avoid it if possible, as we had several issues with lockdep complaining about ordering in the past, see e.g. e4f8e513c3d3 ("mm/slub: fix a deadlock in show_slab_objects()"). The problem scenario in 03afc0e25f7f (solved by the memory hotplug lock) can be summarized as follows: while there's slab_mutex synchronizing new kmem cache creation and SLUB's MEM_GOING_ONLINE callback slab_mem_going_online_callback(), we may miss creation of kmem_cache_node for the hotplugged node in the new kmem cache, because the hotplug callback doesn't yet see the new cache, and cache creation in init_kmem_cache_nodes() only inits kmem_cache_node for nodes in the N_NORMAL_MEMORY nodemask, which however may not yet include the new node, as that happens only later after the MEM_GOING_ONLINE callback. Instead of using get/put_online_mems(), the problem can be solved by SLUB maintaining its own nodemask of nodes for which it has allocated the per-node kmem_cache_node structures. This nodemask would generally mirror the N_NORMAL_MEMORY nodemask, but would be updated only in under SLUB's control in its memory hotplug callbacks under the slab_mutex. This patch adds such nodemask and its handling. Commit 03afc0e25f7f mentiones "issues like [the one above]", but there don't appear to be further issues. All the paths (shared for SLAB and SLUB) taking the memory hotplug locks are also taking the slab_mutex, except kmem_cache_shrink() where 03afc0e25f7f replaced slab_mutex with get/put_online_mems(). We however cannot simply restore slab_mutex in kmem_cache_shrink(), as SLUB can enters the function from a write to sysfs 'shrink' file, thus holding kernfs lock, and in kmem_cache_create() the kernfs lock is nested within slab_mutex. But on closer inspection we don't actually need to protect kmem_cache_shrink() from hotplug callbacks: While SLUB's __kmem_cache_shrink() does for_each_kmem_cache_node(), missing a new node added in parallel hotplug is not fatal, and parallel hotremove does not free kmem_cache_node's anymore after the previous patch, so use-after free cannot happen. The per-node shrinking itself is protected by n->list_lock. Same is true for SLAB, and SLOB is no-op. SLAB also doesn't need the memory hotplug locking, which it only gained by 03afc0e25f7f through the shared paths in slab_common.c. Its memory hotplug callbacks are also protected by slab_mutex against races with these paths. The problem of SLUB relying on N_NORMAL_MEMORY doesn't apply to SLAB, as its setup_kmem_cache_nodes relies on N_ONLINE, and the new node is already set there during the MEM_GOING_ONLINE callback, so no special care is needed for SLAB. As such, this patch removes all get/put_online_mems() usage by the slab subsystem. Link: https://lkml.kernel.org/r/20210113131634.3671-3-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Qian Cai <cai@redhat.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24mm, slub: stop freeing kmem_cache_node structures on node offlineVlastimil Babka1-17/+11
Patch series "mm, slab, slub: remove cpu and memory hotplug locks". Some related work caused me to look at how we use get/put_mems_online() and get/put_online_cpus() during kmem cache creation/descruction/shrinking, and realize that it should be actually safe to remove all of that with rather small effort (as e.g. Michal Hocko suspected in some of the past discussions already). This has the benefit to avoid rather heavy locks that have caused locking order issues already in the past. So this is the result, Patches 2 and 3 remove memory hotplug and cpu hotplug locking, respectively. Patch 1 is due to realization that in fact some races exist despite the locks (even if not removed), but the most sane solution is not to introduce more of them, but rather accept some wasted memory in scenarios that should be rare anyway (full memory hot remove), as we do the same in other contexts already. This patch (of 3): Commit e4f8e513c3d3 ("mm/slub: fix a deadlock in show_slab_objects()") has fixed a problematic locking order by removing the memory hotplug lock get/put_online_mems() from show_slab_objects(). During the discussion, it was argued [1] that this is OK, because existing slabs on the node would prevent a hotremove to proceed. That's true, but per-node kmem_cache_node structures are not necessarily allocated on the same node and may exist even without actual slab pages on the same node. Any path that uses get_node() directly or via for_each_kmem_cache_node() (such as show_slab_objects()) can race with freeing of kmem_cache_node even with the !NULL check, resulting in use-after-free. To that end, commit e4f8e513c3d3 argues in a comment that: * We don't really need mem_hotplug_lock (to hold off * slab_mem_going_offline_callback) here because slab's memory hot * unplug code doesn't destroy the kmem_cache->node[] data. While it's true that slab_mem_going_offline_callback() doesn't free the kmem_cache_node, the later callback slab_mem_offline_callback() actually does, so the race and use-after-free exists. Not just for show_slab_objects() after commit e4f8e513c3d3, but also many other places that are not under slab_mutex. And adding slab_mutex locking or other synchronization to SLUB paths such as get_any_partial() would be bad for performance and error-prone. The easiest solution is therefore to make the abovementioned comment true and stop freeing the kmem_cache_node structures, accepting some wasted memory in the full memory node removal scenario. Analogically we also don't free hotremoved pgdat as mentioned in [1], nor the similar per-node structures in SLAB. Importantly this approach will not block the hotremove, as generally such nodes should be movable in order to succeed hotremove in the first place, and thus the GFP_KERNEL allocated kmem_cache_node will come from elsewhere. [1] https://lore.kernel.org/linux-mm/20190924151147.GB23050@dhcp22.suse.cz/ Link: https://lkml.kernel.org/r/20210113131634.3671-1-vbabka@suse.cz Link: https://lkml.kernel.org/r/20210113131634.3671-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Qian Cai <cai@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24mm/slub: disable user tracing for kmemleak caches by defaultJohannes Berg1-1/+10
If kmemleak is enabled, it uses a kmem cache for its own objects. These objects are used to hold information kmemleak uses, including a stack trace. If slub_debug is also turned on, each of them has *another* stack trace, so the overhead adds up, and on my tests (on ARCH=um, admittedly) 2/3rds of the allocations end up being doing the stack tracing. Turn off SLAB_STORE_USER if SLAB_NOLEAKTRACE was given, to avoid storing the essentially same data twice. Link: https://lkml.kernel.org/r/20210113215114.d94efa13ba30.I117b6764e725b3192318bbcf4269b13b709539ae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24mm/sl?b.c: remove ctor argument from kmem_cache_flagsNikolay Borisov1-6/+3
This argument hasn't been used since e153362a50a3 ("slub: Remove objsize check in kmem_cache_flags()") so simply remove it. Link: https://lkml.kernel.org/r/20210126095733.974665-1-nborisov@suse.com Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24mm, tracing: record slab name for kmem_cache_free()Jacob Wen1-1/+1
Currently, a trace record generated by the RCU core is as below. ... kmem_cache_free: call_site=rcu_core+0x1fd/0x610 ptr=00000000f3b49a66 It doesn't tell us what the RCU core has freed. This patch adds the slab name to trace_kmem_cache_free(). The new format is as follows. ... kmem_cache_free: call_site=rcu_core+0x1fd/0x610 ptr=0000000037f79c8d name=dentry ... kmem_cache_free: call_site=rcu_core+0x1fd/0x610 ptr=00000000f78cb7b5 name=sock_inode_cache ... kmem_cache_free: call_site=rcu_core+0x1fd/0x610 ptr=0000000018768985 name=pool_workqueue ... kmem_cache_free: call_site=rcu_core+0x1fd/0x610 ptr=000000006a6cb484 name=radix_tree_node We can use it to understand what the RCU core is going to free. For example, some users maybe interested in when the RCU core starts freeing reclaimable slabs like dentry to reduce memory pressure. Link: https://lkml.kernel.org/r/20201216072804.8838-1-jian.w.wen@oracle.com Signed-off-by: Jacob Wen <jian.w.wen@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-12Merge branch 'for-mingo-rcu' of ↵Ingo Molnar1-0/+40
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Documentation updates. - Miscellaneous fixes. - kfree_rcu() updates: Addition of mem_dump_obj() to provide allocator return addresses to more easily locate bugs. This has a couple of RCU-related commits, but is mostly MM. Was pulled in with akpm's agreement. - Per-callback-batch tracking of numbers of callbacks, which enables better debugging information and smarter reactions to large numbers of callbacks. - The first round of changes to allow CPUs to be runtime switched from and to callback-offloaded state. - CONFIG_PREEMPT_RT-related changes. - RCU CPU stall warning updates. - Addition of polling grace-period APIs for SRCU. - Torture-test and torture-test scripting updates, including a "torture everything" script that runs rcutorture, locktorture, scftorture, rcuscale, and refscale. Plus does an allmodconfig build. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-10mm, slub: better heuristic for number of cpus when calculating slab orderVlastimil Babka1-2/+16
When creating a new kmem cache, SLUB determines how large the slab pages will based on number of inputs, including the number of CPUs in the system. Larger slab pages mean that more objects can be allocated/free from per-cpu slabs before accessing shared structures, but also potentially more memory can be wasted due to low slab usage and fragmentation. The rough idea of using number of CPUs is that larger systems will be more likely to benefit from reduced contention, and also should have enough memory to spare. Number of CPUs used to be determined as nr_cpu_ids, which is number of possible cpus, but on some systems many will never be onlined, thus commit 045ab8c9487b ("mm/slub: let number of online CPUs determine the slub page order") changed it to nr_online_cpus(). However, for kmem caches created early before CPUs are onlined, this may lead to permamently low slab page sizes. Vincent reports a regression [1] of hackbench on arm64 systems: "I'm facing significant performances regression on a large arm64 server system (224 CPUs). Regressions is also present on small arm64 system (8 CPUs) but in a far smaller order of magnitude On 224 CPUs system : 9 iterations of hackbench -l 16000 -g 16 v5.11-rc4 : 9.135sec (+/- 0.45%) v5.11-rc4 + revert this patch: 3.173sec (+/- 0.48%) v5.10: 3.136sec (+/- 0.40%)" Mel reports a regression [2] of hackbench on x86_64, with lockstat suggesting page allocator contention: "i.e. the patch incurs a 7% to 32% performance penalty. This bisected cleanly yesterday when I was looking for the regression and then found the thread. Numerous caches change size. For example, kmalloc-512 goes from order-0 (vanilla) to order-2 with the revert. So mostly this is down to the number of times SLUB calls into the page allocator which only caches order-0 pages on a per-cpu basis" Clearly num_online_cpus() doesn't work too early in bootup. We could change the order dynamically in a memory hotplug callback, but runtime order changing for existing kmem caches has been already shown as dangerous, and removed in 32a6f409b693 ("mm, slub: remove runtime allocation order changes"). It could be resurrected in a safe manner with some effort, but to fix the regression we need something simpler. We could use num_present_cpus() that should be the number of physically present CPUs even before they are onlined. That would work for PowerPC [3], which triggered the original commit, but that still doesn't work on arm64 [4] as explained in [5]. So this patch tries to determine the best available value without specific arch knowledge. - num_present_cpus() if the number is larger than 1, as that means the arch is likely setting it properly - nr_cpu_ids otherwise This should fix the reported regressions while also keeping the effect of 045ab8c9487b for PowerPC systems. It's possible there are configurations where num_present_cpus() is 1 during boot while nr_cpu_ids is at the same time bloated, so these (if they exist) would keep the large orders based on nr_cpu_ids as was before 045ab8c9487b. [1] https://lore.kernel.org/linux-mm/CAKfTPtA_JgMf_+zdFbcb_V9rM7JBWNPjAz9irgwFj7Rou=xzZg@mail.gmail.com/ [2] https://lore.kernel.org/linux-mm/20210128134512.GF3592@techsingularity.net/ [3] https://lore.kernel.org/linux-mm/20210123051607.GC2587010@in.ibm.com/ [4] https://lore.kernel.org/linux-mm/CAKfTPtAjyVmS5VYvU6DBxg4-JEo5bdmWbngf-03YsY18cmWv_g@mail.gmail.com/ [5] https://lore.kernel.org/linux-mm/20210126230305.GD30941@willie-the-truck/ Link: https://lkml.kernel.org/r/20210208134108.22286-1-vbabka@suse.cz Fixes: 045ab8c9487b ("mm/slub: let number of online CPUs determine the slub page order") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Vincent Guittot <vincent.guittot@linaro.org> Reported-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Vincent Guittot <vincent.guittot@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-28Revert "mm/slub: fix a memory leak in sysfs_slab_add()"Wang Hai1-3/+1
This reverts commit dde3c6b72a16c2db826f54b2d49bdea26c3534a2. syzbot report a double-free bug. The following case can cause this bug. - mm/slab_common.c: create_cache(): if the __kmem_cache_create() fails, it does: out_free_cache: kmem_cache_free(kmem_cache, s); - but __kmem_cache_create() - at least for slub() - will have done sysfs_slab_add(s) -> sysfs_create_group() .. fails .. -> kobject_del(&s->kobj); .. which frees s ... We can't remove the kmem_cache_free() in create_cache(), because other error cases of __kmem_cache_create() do not free this. So, revert the commit dde3c6b72a16 ("mm/slub: fix a memory leak in sysfs_slab_add()") to fix this. Reported-by: syzbot+d0bd96b4696c1ef67991@syzkaller.appspotmail.com Fixes: dde3c6b72a16 ("mm/slub: fix a memory leak in sysfs_slab_add()") Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Wang Hai <wanghai38@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-24kasan, mm: fix conflicts with init_on_alloc/freeAndrey Konovalov1-3/+4
A few places where SLUB accesses object's data or metadata were missed in a previous patch. This leads to false positives with hardware tag-based KASAN when bulk allocations are used with init_on_alloc/free. Fix the false-positives by resetting pointer tags during these accesses. (The kasan_reset_tag call is removed from slab_alloc_node, as it's added into maybe_wipe_obj_freeptr.) Link: https://linux-review.googlesource.com/id/I50dd32838a666e173fe06c3c5c766f2c36aae901 Link: https://lkml.kernel.org/r/093428b5d2ca8b507f4a79f92f9929b35f7fada7.1610731872.git.andreyknvl@google.com Fixes: aa1ef4d7b3f67 ("kasan, mm: reset tags when accessing metadata") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-22mm: Add mem_dump_obj() to print source of memory blockPaul E. McKenney1-0/+40
There are kernel facilities such as per-CPU reference counts that give error messages in generic handlers or callbacks, whose messages are unenlightening. In the case of per-CPU reference-count underflow, this is not a problem when creating a new use of this facility because in that case the bug is almost certainly in the code implementing that new use. However, trouble arises when deploying across many systems, which might exercise corner cases that were not seen during development and testing. Here, it would be really nice to get some kind of hint as to which of several uses the underflow was caused by. This commit therefore exposes a mem_dump_obj() function that takes a pointer to memory (which must still be allocated if it has been dynamically allocated) and prints available information on where that memory came from. This pointer can reference the middle of the block as well as the beginning of the block, as needed by things like RCU callback functions and timer handlers that might not know where the beginning of the memory block is. These functions and handlers can use mem_dump_obj() to print out better hints as to where the problem might lie. The information printed can depend on kernel configuration. For example, the allocation return address can be printed only for slab and slub, and even then only when the necessary debug has been enabled. For slab, build with CONFIG_DEBUG_SLAB=y, and either use sizes with ample space to the next power of two or use the SLAB_STORE_USER when creating the kmem_cache structure. For slub, build with CONFIG_SLUB_DEBUG=y and boot with slub_debug=U, or pass SLAB_STORE_USER to kmem_cache_create() if more focused use is desired. Also for slub, use CONFIG_STACKTRACE to enable printing of the allocation-time stack trace. Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <linux-mm@kvack.org> Reported-by: Andrii Nakryiko <andrii@kernel.org> [ paulmck: Convert to printing and change names per Joonsoo Kim. ] [ paulmck: Move slab definition per Stephen Rothwell and kbuild test robot. ] [ paulmck: Handle CONFIG_MMU=n case where vmalloc() is kmalloc(). ] [ paulmck: Apply Vlastimil Babka feedback on slab.c kmem_provenance(). ] [ paulmck: Extract more info from !SLUB_DEBUG per Joonsoo Kim. ] [ paulmck: Explicitly check for small pointers per Naresh Kamboju. ] Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-12mm, slub: consider rest of partial list if acquire_slab() failsJann Horn1-1/+1
acquire_slab() fails if there is contention on the freelist of the page (probably because some other CPU is concurrently freeing an object from the page). In that case, it might make sense to look for a different page (since there might be more remote frees to the page from other CPUs, and we don't want contention on struct page). However, the current code accidentally stops looking at the partial list completely in that case. Especially on kernels without CONFIG_NUMA set, this means that get_partial() fails and new_slab_objects() falls back to new_slab(), allocating new pages. This could lead to an unnecessary increase in memory fragmentation. Link: https://lkml.kernel.org/r/20201228130853.1871516-1-jannh@google.com Fixes: 7ced37197196 ("slub: Acquire_slab() avoid loop") Signed-off-by: Jann Horn <jannh@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29mm: slub: call account_slab_page() after slab page initializationRoman Gushchin1-3/+2
It's convenient to have page->objects initialized before calling into account_slab_page(). In particular, this information can be used to pre-alloc the obj_cgroup vector. Let's call account_slab_page() a bit later, after the initialization of page->objects. This commit doesn't bring any functional change, but is required for further optimizations. [akpm@linux-foundation.org: undo changes needed by forthcoming mm-memcg-slab-pre-allocate-obj_cgroups-for-slab-caches-with-slab_account.patch] Link: https://lkml.kernel.org/r/20201110195753.530157-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22kasan, mm: reset tags when accessing metadataAndrey Konovalov1-13/+16
Kernel allocator code accesses metadata for slab objects, that may lie out-of-bounds of the object itself, or be accessed when an object is freed. Such accesses trigger tag faults and lead to false-positive reports with hardware tag-based KASAN. Software KASAN modes disable instrumentation for allocator code via KASAN_SANITIZE Makefile macro, and rely on kasan_enable/disable_current() annotations which are used to ignore KASAN reports. With hardware tag-based KASAN neither of those options are available, as it doesn't use compiler instrumetation, no tag faults are ignored, and MTE is disabled after the first one. Instead, reset tags when accessing metadata (currently only for SLUB). Link: https://lkml.kernel.org/r/a0f3cefbc49f34c843b664110842de4db28179d0.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_atJoe Perches1-73/+77
Convert the unbounded uses of sprintf to sysfs_emit. A few conversions may now not end in a newline if the output buffer is overflowed. Link: https://lkml.kernel.org/r/0c90a90f466167f8c37de4b737553cf49c4a277f.1605376435.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15mm/slub: let number of online CPUs determine the slub page orderBharata B Rao1-1/+1
The page order of the slab that gets chosen for a given slab cache depends on the number of objects that can be fit in the slab while meeting other requirements. We start with a value of minimum objects based on nr_cpu_ids that is driven by possible number of CPUs and hence could be higher than the actual number of CPUs present in the system. This leads to calculate_order() chosing a page order that is on the higher side leading to increased slab memory consumption on systems that have bigger page sizes. Hence rely on the number of online CPUs when determining the mininum objects, thereby increasing the chances of chosing a lower conservative page order for the slab. Vlastimil said: "Ideally, we would react to hotplug events and update existing caches accordingly. But for that, recalculation of order for existing caches would have to be made safe, while not affecting hot paths. We have removed the sysfs interface with 32a6f409b693 ("mm, slub: remove runtime allocation order changes") as it didn't seem easy and worth the trouble. In case somebody wants to start with a large order right from the boot because they know they will hotplug lots of cpus later, they can use slub_min_objects= boot param to override this heuristic. So in case this change regresses somebody's performance, there's a way around it and thus the risk is low IMHO" Link: https://lkml.kernel.org/r/20201118082759.1413056-1-bharata@linux.ibm.com Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15mm, slub: use kmem_cache_debug_flags() in deactivate_slab()Vlastimil Babka1-3/+1
Commit 9cf7a1118365 ("mm/slub: make add_full() condition more explicit") replaced an unnecessarily generic kmem_cache_debug(s) check with an explicit check of SLAB_STORE_USER and #ifdef CONFIG_SLUB_DEBUG. We can achieve the same specific check with the recently added kmem_cache_debug_flags() which removes the #ifdef and restores the no-branch-overhead benefit of static key check when slub debugging is not enabled. Link: https://lkml.kernel.org/r/3ef24214-38c7-1238-8296-88caf7f48ab6@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Abel Wu <wuyun.wu@huawei.com> Cc: Christopher Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Liu Xiang <liu.xiang6@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15mm, slab, slub: clear the slab_cache field when freeing pageVlastimil Babka1-2/+2
The page allocator expects that page->mapping is NULL for a page being freed. SLAB and SLUB use the slab_cache field which is in union with mapping, but before freeing the page, the field is referenced with the "mapping" name when set to NULL. It's IMHO more correct (albeit functionally the same) to use the slab_cache name as that's the field we use in SL*B, and document why we clear it in a comment (we don't clear fields such as s_mem or freelist, as page allocator doesn't care about those). While using the 'mapping' name would automagically keep the code correct if the unions in struct page changed, such changes should be done consciously and needed changes evaluated - the comment should help with that. Link: https://lkml.kernel.org/r/20201210160020.21562-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14mm/slub: fix panic in slab_alloc_node()Laurent Dufour1-1/+1
While doing memory hot-unplug operation on a PowerPC VM running 1024 CPUs with 11TB of ram, I hit the following panic: BUG: Kernel NULL pointer dereference on read at 0x00000007 Faulting instruction address: 0xc000000000456048 Oops: Kernel access of bad area, sig: 11 [#2] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS= 2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp CPU: 160 PID: 1 Comm: systemd Tainted: G D 5.9.0 #1 NIP: c000000000456048 LR: c000000000455fd4 CTR: c00000000047b350 REGS: c00006028d1b77a0 TRAP: 0300 Tainted: G D (5.9.0) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24004228 XER: 00000000 CFAR: c00000000000f1b0 DAR: 0000000000000007 DSISR: 40000000 IRQMASK: 0 GPR00: c000000000455fd4 c00006028d1b7a30 c000000001bec800 0000000000000000 GPR04: 0000000000000dc0 0000000000000000 00000000000374ef c00007c53df99320 GPR08: 000007c53c980000 0000000000000000 000007c53c980000 0000000000000000 GPR12: 0000000000004400 c00000001e8e4400 0000000000000000 0000000000000f6a GPR16: 0000000000000000 c000000001c25930 c000000001d62528 00000000000000c1 GPR20: c000000001d62538 c00006be469e9000 0000000fffffffe0 c0000000003c0ff8 GPR24: 0000000000000018 0000000000000000 0000000000000dc0 0000000000000000 GPR28: c00007c513755700 c000000001c236a4 c00007bc4001f800 0000000000000001 NIP [c000000000456048] __kmalloc_node+0x108/0x790 LR [c000000000455fd4] __kmalloc_node+0x94/0x790 Call Trace: kvmalloc_node+0x58/0x110 mem_cgroup_css_online+0x10c/0x270 online_css+0x48/0xd0 cgroup_apply_control_enable+0x2c4/0x470 cgroup_mkdir+0x408/0x5f0 kernfs_iop_mkdir+0x90/0x100 vfs_mkdir+0x138/0x250 do_mkdirat+0x154/0x1c0 system_call_exception+0xf8/0x200 system_call_common+0xf0/0x27c Instruction dump: e93e0000 e90d0030 39290008 7cc9402a e94d0030 e93e0000 7ce95214 7f89502a 2fbc0000 419e0018 41920230 e9270010 <89290007> 7f994800 419e0220 7ee6bb78 This pointing to the following code: mm/slub.c:2851 if (unlikely(!object || !node_match(page, node))) { c000000000456038: 00 00 bc 2f cmpdi cr7,r28,0 c00000000045603c: 18 00 9e 41 beq cr7,c000000000456054 <__kmalloc_node+0x114> node_match(): mm/slub.c:2491 if (node != NUMA_NO_NODE && page_to_nid(page) != node) c000000000456040: 30 02 92 41 beq cr4,c000000000456270 <__kmalloc_node+0x330> page_to_nid(): include/linux/mm.h:1294 c000000000456044: 10 00 27 e9 ld r9,16(r7) c000000000456048: 07 00 29 89 lbz r9,7(r9) <<<< r9 = NULL node_match(): mm/slub.c:2491 c00000000045604c: 00 48 99 7f cmpw cr7,r25,r9 c000000000456050: 20 02 9e 41 beq cr7,c000000000456270 <__kmalloc_node+0x330> The panic occurred in slab_alloc_node() when checking for the page's node: object = c->freelist; page = c->page; if (unlikely(!object || !node_match(page, node))) { object = __slab_alloc(s, gfpflags, node, addr, c); stat(s, ALLOC_SLOWPATH); The issue is that object is not NULL while page is NULL which is odd but may happen if the cache flush happened after loading object but before loading page. Thus checking for the page pointer is required too. The cache flush is done through an inter processor interrupt when a piece of memory is off-lined. That interrupt is triggered when a memory hot-unplug operation is initiated and offline_pages() is calling the slub's MEM_GOING_OFFLINE callback slab_mem_going_offline_callback() which is calling flush_cpu_slab(). If that interrupt is caught between the reading of c->freelist and the reading of c->page, this could lead to such a situation. That situation is expected and the later call to this_cpu_cmpxchg_double() will detect the change to c->freelist and redo the whole operation. In commit 6159d0f5c03e ("mm/slub.c: page is always non-NULL in node_match()") check on the page pointer has been removed assuming that page is always valid when it is called. It happens that this is not true in that particular case, so check for page before calling node_match() here. Fixes: 6159d0f5c03e ("mm/slub.c: page is always non-NULL in node_match()") Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Christoph Lameter <cl@linux.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201027190406.33283-1-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16mm: fix some comments formattingChen Tao1-1/+1
Correct one function name "get_partials" with "get_partial". Update the old struct name of list3 with kmem_cache_node. Signed-off-by: Chen Tao <chentao3@hotmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lkml.kernel.org/r/Message-ID: Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13mm: memcg/slab: uncharge during kmem_cache_free_bulk()Bharata B Rao1-1/+2
Object cgroup charging is done for all the objects during allocation, but during freeing, uncharging ends up happening for only one object in the case of bulk allocation/freeing. Fix this by having a separate call to uncharge all the objects from kmem_cache_free_bulk() and by modifying memcg_slab_free_hook() to take care of bulk uncharging. Fixes: 964d4bd370d5 ("mm: memcg/slab: save obj_cgroup for non-root slab objects" Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Roman Gushchin <guro@fb.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201009060423.390479-1-bharata@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13mm/slub: make add_full() condition more explicitAbel Wu1-1/+3
The commit below is incomplete, as it didn't handle the add_full() part. commit a4d3f8916c65 ("slub: remove useless kmem_cache_debug() before remove_full()") This patch checks for SLAB_STORE_USER instead of kmem_cache_debug(), since that should be the only context in which we need the list_lock for add_full(). Signed-off-by: Abel Wu <wuyun.wu@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Liu Xiang <liu.xiang6@zte.com.cn> Link: https://lkml.kernel.org/r/20200811020240.1231-1-wuyun.wu@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13mm/slub: fix missing ALLOC_SLOWPATH stat when bulk allocAbel Wu1-1/+2
The ALLOC_SLOWPATH statistics is missing in bulk allocation now. Fix it by doing statistics in alloc slow path. Signed-off-by: Abel Wu <wuyun.wu@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Hewenliang <hewenliang4@huawei.com> Cc: Hu Shiyuan <hushiyuan@huawei.com> Link: http://lkml.kernel.org/r/20200811022427.1363-1-wuyun.wu@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13mm/slub.c: branch optimization in free slowpathAbel Wu1-11/+12
The two conditions are mutually exclusive and gcc compiler will optimise this into if-else-like pattern. Given that the majority of free_slowpath is free_frozen, let's provide some hint to the compilers. Tests (perf bench sched messaging -g 20 -l 400000, executed 10x after reboot) are done and the summarized result: un-patched patched max. 192.316 189.851 min. 187.267 186.252 avg. 189.154 188.086 stdev. 1.37 0.99 Signed-off-by: Abel Wu <wuyun.wu@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Hewenliang <hewenliang4@huawei.com> Cc: Hu Shiyuan <hushiyuan@huawei.com> Link: http://lkml.kernel.org/r/20200813101812.1617-1-wuyun.wu@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-03mm, slub: restore initial kmem_cache flagsEric Farman1-5/+1
The routine that applies debug flags to the kmem_cache slabs inadvertantly prevents non-debug flags from being applied to those same objects. That is, if slub_debug=<flag>,<slab> is specified, non-debugged slabs will end up having flags of zero, and the slabs may be unusable. Fix this by including the input flags for non-matching slabs with the contents of slub_debug, so that the caches are created as expected alongside any debugging options that may be requested. With this, we can remove the check for a NULL slub_debug_string, since it's covered by the loop itself. Fixes: e17f1dfba37b ("mm, slub: extend slub_debug syntax for multiple blocks") Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Kees Cook <keescook@chromium.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Link: https://lkml.kernel.org/r/20200930161931.28575-1-farman@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-05mm: slub: fix conversion of freelist_corrupted()Eugeniu Rosca1-6/+6
Commit 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in deactivate_slab()") suffered an update when picked up from LKML [1]. Specifically, relocating 'freelist = NULL' into 'freelist_corrupted()' created a no-op statement. Fix it by sticking to the behavior intended in the original patch [1]. In addition, make freelist_corrupted() immune to passing NULL instead of &freelist. The issue has been spotted via static analysis and code review. [1] https://lore.kernel.org/linux-mm/20200331031450.12182-1-dongli.zhang@oracle.com/ Fixes: 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in deactivate_slab()") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200824130643.10291-1-erosca@de.adit-jv.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07mm: slab: rename (un)charge_slab_page() to (un)account_slab_page()Roman Gushchin1-2/+2
charge_slab_page() and uncharge_slab_page() are not related anymore to memcg charging and uncharging. In order to make their names less confusing, let's rename them to account_slab_page() and unaccount_slab_page() respectively. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Link: http://lkml.kernel.org/r/20200707173612.124425-2-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07mm: memcg/slab: remove unused argument by charge_slab_page()Roman Gushchin1-1/+1
charge_slab_page() is not using the gfp argument anymore, remove it. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Link: http://lkml.kernel.org/r/20200707173612.124425-1-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07mm: memcg/slab: use a single set of kmem_caches for all allocationsRoman Gushchin1-159/+4
Instead of having two sets of kmem_caches: one for system-wide and non-accounted allocations and the second one shared by all accounted allocations, we can use just one. The idea is simple: space for obj_cgroup metadata can be allocated on demand and filled only for accounted allocations. It allows to remove a bunch of code which is required to handle kmem_cache clones for accounted allocations. There is no more need to create them, accumulate statistics, propagate attributes, etc. It's a quite significant simplification. Also, because the total number of slab_caches is reduced almost twice (not all kmem_caches have a memcg clone), some additional memory savings are expected. On my devvm it additionally saves about 3.5% of slab memory. [guro@fb.com: fix build on MIPS] Link: http://lkml.kernel.org/r/20200717214810.3733082-1-guro@fb.com Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Link: http://lkml.kernel.org/r/20200623174037.3951353-18-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 08:53:48 +0000