summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2017-09-28arp: make arp_hdr_len() return unsigned intAlexey Dobriyan1-1/+1
Negative ARP header length are not a thing. Constify arguments while I'm at it. Space savings: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3 (-3) function old new delta arpt_do_table 1163 1160 -3 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-27net: mroute: Check if rule is a default ruleYotam Gigi1-0/+7
When the ipmr starts, it adds one default FIB rule that matches all packets and sends them to the DEFAULT (multicast) FIB table. A more complex rule can be added by user to specify that for a specific interface, a packet should be look up at either an arbitrary table or according to the l3mdev of the interface. For drivers willing to offload the ipmr logic into a hardware but don't want to offload all the FIB rules functionality, provide a function that can indicate whether the FIB rule is the default multicast rule, thus only one routing table is needed. This way, a driver can register to the FIB notification chain, get notifications about FIB rules added and trigger some kind of an internal abort mechanism when a non default rule is added by the user. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-27net: ipmr: Add MFC offload indicationYotam Gigi1-0/+2
Allow drivers, registered to the fib notification chain indicate whether a multicast MFC route is offloaded or not, similarly to unicast routes. The indication of whether a route is offloaded is done using the mfc_flags field on an mfc_cache struct, and the information is sent to the userspace via the RTNetlink interface only. Currently, MFC routes are either offloaded or not, thus there is no need to add per-VIF offload indication. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-27ipmr: Add FIB notification access functionsYotam Gigi2-0/+18
Make the ipmr module register as a FIB notifier. To do that, implement both the ipmr_seq_read and ipmr_dump ops. The ipmr_seq_read op returns a sequence counter that is incremented on every notification related operation done by the ipmr. To implement that, add a sequence counter in the netns_ipv4 struct and increment it whenever a new MFC route or VIF are added or deleted. The sequence operations are protected by the RTNL lock. The ipmr_dump iterates the list of MFC routes and the list of VIF entries and sends notifications about them. The entries dump is done under RCU where the VIF dump uses the mrt_lock too, as the vif->dev field can change under RCU. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-27ipmr: Add reference count to MFC entriesYotam Gigi1-0/+21
Next commits will introduce MFC notifications through the atomic fib_notification chain, thus allowing modules to be aware of MFC entries. Due to the fact that modules may need to hold a reference to an MFC entry, add reference count to MFC entries to prevent them from being freed while these modules use them. The reference counting is done only on resolved MFC entries currently. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-27fib: notifier: Add VIF add and delete event typesYotam Gigi1-0/+2
In order for an interface to forward packets according to the kernel multicast routing table, it must be configured with a VIF index according to the mroute user API. The VIF index is then used to refer to that interface in the mroute user API, for example, to set the iif and oifs of an MFC entry. In order to allow drivers to be aware and offload multicast routes, they have to be aware of the VIF add and delete notifications. Due to the fact that a specific VIF can be deleted and re-added pointing to another netdevice, and the MFC routes that point to it will forward the matching packets to the new netdevice, a driver willing to offload MFC cache entries must be aware of the VIF add and delete events in addition to MFC routes notifications. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26net: sched: introduce helper to identify gact pass actionJiri Pirko1-0/+5
Introduce a helper called is_tcf_gact_pass which could be used to tell if the action is gact pass or not. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26bpf: add meta pointer for direct accessDaniel Borkmann4-5/+98
This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26bpf: rename bpf_compute_data_end into bpf_compute_data_pointersDaniel Borkmann1-3/+6
Just do the rename into bpf_compute_data_pointers() as we'll add one more pointer here to recompute. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26qed: iWARP - Add check for errors on a SYN packetMichal Kalderon1-0/+1
A SYN packet which arrives with errors from FW should be dropped. This required adding an additional field to the ll2 rx completion data. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25neigh: make strucrt neigh_table::entry_size unsigned intAlexey Dobriyan1-1/+1
Key length can't be negative. Leave comparisons against nla_len() signed just in case truncated attribute can sneak in there. Space savings: add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-7 (-7) function old new delta pneigh_delete 273 272 -1 mlx5e_rep_netevent_event 1415 1414 -1 mlx5e_create_encap_header_ipv6 1194 1193 -1 mlx5e_create_encap_header_ipv4 1071 1070 -1 cxgb4_l2t_get 1104 1103 -1 __pneigh_lookup 69 68 -1 __neigh_create 2452 2451 -1 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25neigh: make struct neigh_table::entry_size unsigned intAlexey Dobriyan1-1/+1
Neigh entry size can't be negative. Space savings: add/remove: 0/0 grow/shrink: 0/5 up/down: 0/-7 (-7) function old new delta lowpan_neigh_construct 25 24 -1 clip_seq_sub_iter 152 151 -1 clip_ioctl 1475 1474 -1 clip_constructor 93 92 -1 __neigh_create 2455 2452 -3 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25tun: enable napi_gro_frags() for TUN/TAP driverPetar Penkov1-0/+1
Add a TUN/TAP receive mode that exercises the napi_gro_frags() interface. This mode is available only in TAP mode, as the interface expects packets with Ethernet headers. Furthermore, packets follow the layout of the iovec_iter that was received. The first iovec is the linear data, and every one after the first is a fragment. If there are more fragments than the max number, drop the packet. Additionally, invoke eth_get_headlen() to exercise flow dissector code and to verify that the header resides in the linear data. The napi_gro_frags() mode requires setting the IFF_NAPI_FRAGS option. This is imposed because this mode is intended for testing via tools like syzkaller and packetdrill, and the increased flexibility it provides can introduce security vulnerabilities. This flag is accepted only if the device is in TAP mode and has the IFF_NAPI flag set as well. This is done because both of these are explicit requirements for correct operation in this mode. Signed-off-by: Petar Penkov <peterpenkov96@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: davem@davemloft.net Cc: ppenkov@stanford.edu Acked-by: Mahesh Bandewar <maheshb@google,com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25tun: enable NAPI for TUN/TAP driverPetar Penkov1-0/+1
Changes TUN driver to use napi_gro_receive() upon receiving packets rather than netif_rx_ni(). Adds flag IFF_NAPI that enables these changes and operation is not affected if the flag is disabled. SKBs are constructed upon packet arrival and are queued to be processed later. The new path was evaluated with a benchmark with the following setup: Open two tap devices and a receiver thread that reads in a loop for each device. Start one sender thread and pin all threads to different CPUs. Send 1M minimum UDP packets to each device and measure sending time for each of the sending methods: napi_gro_receive(): 4.90s netif_rx_ni(): 4.90s netif_receive_skb(): 7.20s Signed-off-by: Petar Penkov <peterpenkov96@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: davem@davemloft.net Cc: ppenkov@stanford.edu Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller14-147/+122
2017-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds6-22/+12
Pull networking fixes from David Miller: 1) Fix NAPI poll list corruption in enic driver, from Christian Lamparter. 2) Fix route use after free, from Eric Dumazet. 3) Fix regression in reuseaddr handling, from Josef Bacik. 4) Assert the size of control messages in compat handling since we copy it in from userspace twice. From Meng Xu. 5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.) from Ursula Braun. 6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn. 7) Don't use ARRAY_SIZE on spinlock array which might have zero entries, from Geert Uytterhoeven. 8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov Kasiviswanathan. 9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) inet: fix improper empty comparison net: use inet6_rcv_saddr to compare sockets net: set tb->fast_sk_family net: orphan frags on stand-alone ptype in dev_queue_xmit_nit MAINTAINERS: update git tree locations for ieee802154 subsystem net: prevent dst uses after free net: phy: Fix truncation of large IRQ numbers in phy_attached_print() net/smc: no close wait in case of process shut down net/smc: introduce a delay net/smc: terminate link group if out-of-sync is received net/smc: longer delay for client link group removal net/smc: adapt send request completion notification net/smc: adjust net_device refcount net/smc: take RCU read lock for routing cache lookup net/smc: add receive timeout check net/smc: add missing dev_put net: stmmac: Cocci spatch "of_table" lan78xx: Use default values loaded from EEPROM/OTP after reset lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE lan78xx: Fix for eeprom read/write when device auto suspend ...
2017-09-22net: Remove useless function skb_header_releaseGao Feng1-19/+0
There is no one which would invokes the function skb_header_release. So just remove it now. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22Merge tag 'acpi-4.14-rc2' of ↵Linus Torvalds1-14/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix the initialization of resources in the ACPI WDAT watchdog driver, a recent regression in the ACPI device properties handling, a recent change in behavior causing the ACPI_HANDLE() macro to only work for GPL code and create a MAINTAINERS entry for ACPI PMIC drivers in order to specify the official reviewers for that code. Specifics: - Fix the initialization of resources in the ACPI WDAT watchdog driver that uses unititialized memory which causes compiler warnings to be triggered (Arnd Bergmann). - Fix a recent regression in the ACPI device properties handling that causes some device properties data to be skipped during enumeration (Sakari Ailus). - Fix a recent change in behavior that caused the ACPI_HANDLE() macro to stop working for non-GPL code which is a problem for the NVidia binary graphics driver, for example (John Hubbard). - Add a MAINTAINERS entry for the ACPI PMIC drivers to specify the official reviewers for that code (Rafael Wysocki)" * tag 'acpi-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: properties: Return _DSD hierarchical extension (data) sub-nodes correctly ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again ACPI / watchdog: properly initialize resources ACPI / PMIC: Add code reviewers to MAINTAINERS
2017-09-22Merge tag 'pm-4.14-rc2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a cpufreq regression introduced by recent changes related to the generic DT driver, an initialization time memory leak in cpuidle on ARM, a PM core bug that may cause system suspend/resume to fail on some systems, a request type validation issue in the PM QoS framework and two documentation-related issues. Specifics: - Fix a regression in cpufreq on systems using DT as the source of CPU configuration information where two different code paths attempt to create the cpufreq-dt device object (there can be only one) and fix up the "compatible" matching for some TI platforms on top of that (Viresh Kumar, Dave Gerlach). - Fix an initialization time memory leak in cpuidle on ARM which occurs if the cpuidle driver initialization fails (Stefan Wahren). - Fix a PM core function that checks whether or not there are any system suspend/resume callbacks for a device, but forgets to check legacy callbacks which then may be skipped incorrectly and the system may crash and/or the device may become unusable after a suspend-resume cycle (Rafael Wysocki). - Fix request type validation for latency tolerance PM QoS requests which may lead to unexpected behavior (Jan Schönherr). - Fix a broken link to PM documentation from a header file and a typo in a PM document (Geert Uytterhoeven, Rafael Wysocki)" * tag 'pm-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: ti-cpufreq: Support additional am43xx platforms ARM: cpuidle: Avoid memleak if init fail cpufreq: dt-platdev: Add some missing platforms to the blacklist PM: core: Fix device_pm_check_callbacks() PM: docs: Drop an excess character from devices.rst PM / QoS: Use the correct variable to check the QoS request type driver core: Fix link to device power management documentation
2017-09-22Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - fixes for two long standing issues (lock up and a crash) in force feedback handling in uinput driver - tweak to firmware update timing in Elan I2C touchpad driver. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - extend Flash-Write delay Input: uinput - avoid crash when sending FF request to device going away Input: uinput - avoid FF flush when destroying device
2017-09-22Merge tag 'seccomp-v4.14-rc2' of ↵Linus Torvalds3-14/+18
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: "Major additions: - sysctl and seccomp operation to discover available actions (tyhicks) - new per-filter configurable logging infrastructure and sysctl (tyhicks) - SECCOMP_RET_LOG to log allowed syscalls (tyhicks) - SECCOMP_RET_KILL_PROCESS as the new strictest possible action - self-tests for new behaviors" [ This is the seccomp part of the security pull request during the merge window that was nixed due to unrelated problems - Linus ] * tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: samples: Unrename SECCOMP_RET_KILL selftests/seccomp: Test thread vs process killing seccomp: Implement SECCOMP_RET_KILL_PROCESS action seccomp: Introduce SECCOMP_RET_KILL_PROCESS seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD seccomp: Action to log before allowing seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW seccomp: Selftest for detection of filter flag support seccomp: Sysctl to configure actions that are allowed to be logged seccomp: Operation for checking if an action is available seccomp: Sysctl to display available actions seccomp: Provide matching filter for introspection selftests/seccomp: Refactor RET_ERRNO tests selftests/seccomp: Add simple seccomp overhead benchmark selftests/seccomp: Add tests for basic ptrace actions
2017-09-22Merge tag 'for-linus-4.14b-rc2-tag' of ↵Linus Torvalds1-10/+0
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "A fix for a missing __init annotation and two cleanup patches" * tag 'for-linus-4.14b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen, arm64: drop dummy lookup_address() xen: don't compile pv-specific parts if XEN_PV isn't configured xen: x86: mark xen_find_pt_base as __init
2017-09-21net: prevent dst uses after freeEric Dumazet3-20/+6
In linux-4.13, Wei worked hard to convert dst to a traditional refcounted model, removing GC. We now want to make sure a dst refcount can not transition from 0 back to 1. The problem here is that input path attached a not refcounted dst to an skb. Then later, because packet is forwarded and hits skb_dst_force() before exiting RCU section, we might try to take a refcount on one dst that is about to be freed, if another cpu saw 1 -> 0 transition in dst_release() and queued the dst for freeing after one RCU grace period. Lets unify skb_dst_force() and skb_dst_force_safe(), since we should always perform the complete check against dst refcount, and not assume it is not zero. Bugzilla : https://bugzilla.kernel.org/show_bug.cgi?id=197005 [ 989.919496] skb_dst_force+0x32/0x34 [ 989.919498] __dev_queue_xmit+0x1ad/0x482 [ 989.919501] ? eth_header+0x28/0xc6 [ 989.919502] dev_queue_xmit+0xb/0xd [ 989.919504] neigh_connected_output+0x9b/0xb4 [ 989.919507] ip_finish_output2+0x234/0x294 [ 989.919509] ? ipt_do_table+0x369/0x388 [ 989.919510] ip_finish_output+0x12c/0x13f [ 989.919512] ip_output+0x53/0x87 [ 989.919513] ip_forward_finish+0x53/0x5a [ 989.919515] ip_forward+0x2cb/0x3e6 [ 989.919516] ? pskb_trim_rcsum.part.9+0x4b/0x4b [ 989.919518] ip_rcv_finish+0x2e2/0x321 [ 989.919519] ip_rcv+0x26f/0x2eb [ 989.919522] ? vlan_do_receive+0x4f/0x289 [ 989.919523] __netif_receive_skb_core+0x467/0x50b [ 989.919526] ? tcp_gro_receive+0x239/0x239 [ 989.919529] ? inet_gro_receive+0x226/0x238 [ 989.919530] __netif_receive_skb+0x4d/0x5f [ 989.919532] netif_receive_skb_internal+0x5c/0xaf [ 989.919533] napi_gro_receive+0x45/0x81 [ 989.919536] ixgbe_poll+0xc8a/0xf09 [ 989.919539] ? kmem_cache_free_bulk+0x1b6/0x1f7 [ 989.919540] net_rx_action+0xf4/0x266 [ 989.919543] __do_softirq+0xa8/0x19d [ 989.919545] irq_exit+0x5d/0x6b [ 989.919546] do_IRQ+0x9c/0xb5 [ 989.919548] common_interrupt+0x93/0x93 [ 989.919548] </IRQ> Similarly dst_clone() can use dst_hold() helper to have additional debugging, as a follow up to commit 44ebe79149ff ("net: add debug atomic_inc_not_zero() in dst_hold()") In net-next we will convert dst atomic_t to refcount_t for peace of mind. Fixes: a4c2fd7f7891 ("net: remove DST_NOCACHE flag") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Reported-by: Paweł Staszewski <pstaszewski@itcare.pl> Bisected-by: Paweł Staszewski <pstaszewski@itcare.pl> Acked-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21ipv4: Move fib_has_custom_local_routes outside of IP_MULTIPLE_TABLES.David S. Miller1-1/+1
> net/ipv4/fib_frontend.c: In function 'fib_validate_source': > net/ipv4/fib_frontend.c:411:16: error: 'struct netns_ipv4' has no member named 'fib_has_custom_local_routes' > if (net->ipv4.fib_has_custom_local_routes) > ^ > net/ipv4/fib_frontend.c: In function 'inet_rtm_newroute': > net/ipv4/fib_frontend.c:773:12: error: 'struct netns_ipv4' has no member named 'fib_has_custom_local_routes' > net->ipv4.fib_has_custom_local_routes = true; > ^ Fixes: 6e617de84e87 ("net: avoid a full fib lookup when rp_filter is disabled.") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21Input: uinput - avoid FF flush when destroying deviceDmitry Torokhov1-0/+1
Normally, when input device supporting force feedback effects is being destroyed, we try to "flush" currently playing effects, so that the physical device does not continue vibrating (or executing other effects). Unfortunately this does not work well for uinput as flushing of the effects deadlocks with the destroy action: - if device is being destroyed because the file descriptor is being closed, then there is noone to even service FF requests; - if device is being destroyed because userspace sent UI_DEV_DESTROY, while theoretically it could be possible to service FF requests, userspace is unlikely to do so (they'd need to make sure FF handling happens on a separate thread) even if kernel solves the issue with FF ioctls deadlocking with UI_DEV_DESTROY ioctl on udev->mutex. To avoid lockups like the one below, let's install a custom input device flush handler, and avoid trying to flush force feedback effects when we destroying the device, and instead rely on uinput to shut off the device properly. NMI watchdog: Watchdog detected hard LOCKUP on cpu 3 ... <<EOE>> [<ffffffff817a0307>] _raw_spin_lock_irqsave+0x37/0x40 [<ffffffff810e633d>] complete+0x1d/0x50 [<ffffffffa00ba08c>] uinput_request_done+0x3c/0x40 [uinput] [<ffffffffa00ba587>] uinput_request_submit.part.7+0x47/0xb0 [uinput] [<ffffffffa00bb62b>] uinput_dev_erase_effect+0x5b/0x76 [uinput] [<ffffffff815d91ad>] erase_effect+0xad/0xf0 [<ffffffff815d929d>] flush_effects+0x4d/0x90 [<ffffffff815d4cc0>] input_flush_device+0x40/0x60 [<ffffffff815daf1c>] evdev_cleanup+0xac/0xc0 [<ffffffff815daf5b>] evdev_disconnect+0x2b/0x60 [<ffffffff815d74ac>] __input_unregister_device+0xac/0x150 [<ffffffff815d75f7>] input_unregister_device+0x47/0x70 [<ffffffffa00bac45>] uinput_destroy_device+0xb5/0xc0 [uinput] [<ffffffffa00bb2de>] uinput_ioctl_handler.isra.9+0x65e/0x740 [uinput] [<ffffffff811231ab>] ? do_futex+0x12b/0xad0 [<ffffffffa00bb3f8>] uinput_ioctl+0x18/0x20 [uinput] [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480 [<ffffffff81337553>] ? security_file_ioctl+0x43/0x60 [<ffffffff812414a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71 Reported-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Reported-by: Clément VUCHENER <clement.vuchener@gmail.com> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=193741 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-21net: ethtool: Add back transceiver typeFlorian Fainelli1-1/+5
Commit 3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") deprecated the ethtool_cmd::transceiver field, which was fine in premise, except that the PHY library was actually using it to report the type of transceiver: internal or external. Use the first word of the reserved field to put this __u8 transceiver field back in. It is made read-only, and we don't expect the ETHTOOL_xLINKSETTINGS API to be doing anything with this anyway, so this is mostly for the legacy path where we do: ethtool_get_settings() -> dev->ethtool_ops->get_link_ksettings() -> convert_link_ksettings_to_legacy_settings() to have no information loss compared to the legacy get_settings API. Fixes: 3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: avoid a full fib lookup when rp_filter is disabled.Paolo Abeni2-0/+2
Since commit 1dced6a85482 ("ipv4: Restore accept_local behaviour in fib_validate_source()") a full fib lookup is needed even if the rp_filter is disabled, if accept_local is false - which is the default. What we really need in the above scenario is just checking that the source IP address is not local, and in most case we can do that is a cheaper way looking up the ifaddr hash table. This commit adds a helper for such lookup, and uses it to validate the src address when rp_filter is disabled and no 'local' routes are created by the user space in the relevant namespace. A new ipv4 netns flag is added to account for such routes. We need that to preserve the same behavior we had before this patch. It also drops the checks to bail early from __fib_validate_source, added by the commit 1dced6a85482 ("ipv4: Restore accept_local behaviour in fib_validate_source()") they do not give any measurable performance improvement: if we do the lookup with are on a slower path. This improves UDP performances for unconnected sockets when rp_filter is disabled by 5% and also gives small but measurable performance improvement for TCP flood scenarios. v1 -> v2: - use the ifaddr lookup helper in __ip_dev_find(), as suggested by Eric - fall-back to full lookup if custom local routes are present Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20bpf: one perf event close won't free bpf program attached by another perf eventYonghong Song1-0/+1
This patch fixes a bug exhibited by the following scenario: 1. fd1 = perf_event_open with attr.config = ID1 2. attach bpf program prog1 to fd1 3. fd2 = perf_event_open with attr.config = ID1 <this will be successful> 4. user program closes fd2 and prog1 is detached from the tracepoint. 5. user program with fd1 does not work properly as tracepoint no output any more. The issue happens at step 4. Multiple perf_event_open can be called successfully, but only one bpf prog pointer in the tp_event. In the current logic, any fd release for the same tp_event will free the tp_event->prog. The fix is to free tp_event->prog only when the closing fd corresponds to the one which registered the program. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19ipv4: speedup ipv6 tunnels dismantleEric Dumazet1-1/+2
Implement exit_batch() method to dismantle more devices per round. (rtnl_lock() ... unregister_netdevice_many() ... rtnl_unlock()) Tested: $ cat add_del_unshare.sh for i in `seq 1 40` do (for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) & done wait ; grep net_namespace /proc/slabinfo Before patch : $ time ./add_del_unshare.sh net_namespace 126 282 5504 1 2 : tunables 8 4 0 : slabdata 126 282 0 real 1m38.965s user 0m0.688s sys 0m37.017s After patch: $ time ./add_del_unshare.sh net_namespace 135 291 5504 1 2 : tunables 8 4 0 : slabdata 135 291 0 real 0m22.117s user 0m0.728s sys 0m35.328s Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19ipv6: addrlabel: per netns listEric Dumazet1-0/+5
Having a global list of labels do not scale to thousands of netns in the cloud era. This causes quadratic behavior on netns creation and deletion. This is time having a per netns list of ~10 labels. Tested: $ time perf record (for f in `seq 1 3000` ; do ip netns add tast$f; done) [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 3.637 MB perf.data (~158898 samples) ] real 0m20.837s # instead of 0m24.227s user 0m0.328s sys 0m20.338s # instead of 0m23.753s 16.17% ip [kernel.kallsyms] [k] netlink_broadcast_filtered 12.30% ip [kernel.kallsyms] [k] netlink_has_listeners 6.76% ip [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.78% ip [kernel.kallsyms] [k] memset_erms 5.77% ip [kernel.kallsyms] [k] kobject_uevent_env 5.18% ip [kernel.kallsyms] [k] refcount_sub_and_test 4.96% ip [kernel.kallsyms] [k] _raw_read_lock 3.82% ip [kernel.kallsyms] [k] refcount_inc_not_zero 3.33% ip [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 2.11% ip [kernel.kallsyms] [k] unmap_page_range 1.77% ip [kernel.kallsyms] [k] __wake_up 1.69% ip [kernel.kallsyms] [k] strlen 1.17% ip [kernel.kallsyms] [k] __wake_up_common 1.09% ip [kernel.kallsyms] [k] insert_header 1.04% ip [kernel.kallsyms] [k] page_remove_rmap 1.01% ip [kernel.kallsyms] [k] consume_skb 0.98% ip [kernel.kallsyms] [k] netlink_trim 0.51% ip [kernel.kallsyms] [k] kernfs_link_sibling 0.51% ip [kernel.kallsyms] [k] filemap_map_pages 0.46% ip [kernel.kallsyms] [k] memcpy_erms Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net_sched: no need to free qdisc in RCU callbackCong Wang1-1/+0
gen estimator has been rewritten in commit 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators"), the caller no longer needs to wait for a grace period. So this patch gets rid of it. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: remove copy of master ethtool_opsVivien Didelot1-1/+0
There is no need to store a copy of the master ethtool ops, storing the original pointer in DSA and the new one in the master netdev itself is enough. In the meantime, set orig_ethtool_ops to NULL when restoring the master ethtool ops and check the presence of the master original ethtool ops as well as its needed functions before calling them. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: sk_buff rbnode reorgEric Dumazet2-14/+8
skb->rbnode shares space with skb->next, skb->prev and skb->tstamp Current uses (TCP receive ofo queue and netem) need to save/restore tstamp, while skb->dev is either NULL (TCP) or a constant for a given queue (netem). Since we plan using an RB tree for TCP retransmit queue to speedup SACK processing with large BDP, this patch exchanges skb->dev and skb->tstamp. This saves some overhead in both TCP and netem. v2: removes the swtstamp field from struct tcp_skb_cb Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19ACPI / bus: Make ACPI_HANDLE() work for non-GPL code againJohn Hubbard1-14/+4
Due to commit db3e50f3234b (device property: Get rid of struct fwnode_handle type field), ACPI_HANDLE() inadvertently became a GPL-only call. The call path that led to that was: ACPI_HANDLE() ACPI_COMPANION() to_acpi_device_node() is_acpi_device_node() acpi_device_fwnode_ops DECLARE_ACPI_FWNODE_OPS(acpi_device_fwnode_ops); ...and the new DECLARE_ACPI_FWNODE_OPS() includes EXPORT_SYMBOL_GPL, whereas previously it was a static struct. In order to avoid changing any of that, let's instead provide ever so slightly better encapsulation of those struct fwnode_operations instances. Those do not really need to be directly used in inline function calls in header files. Simply moving two small functions (is_acpi_device_node and is_acpi_data_node) out of acpi_bus.h, and into a .c file, does that. That leaves the internals of struct fwnode_operations as GPL-only (which I think was the intent all along), but un-breaks any driver code out there that relies on the ACPI subsystem's being (historically) an EXPORT_SYMBOL-usable system. By that, I mean, ACPI_HANDLE() and other basic ACPI calls were non-GPL-protected. Also, while I'm there, remove a tiny bit of redundancy that was missed in the earlier commit, by having is_acpi_node() use the other two routines, instead of checking fwnode directly. Fixes: db3e50f3234b (device property: Get rid of struct fwnode_handle type field) Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-19xen, arm64: drop dummy lookup_address()Tycho Andersen1-10/+0
This is unused, and conflicts with the definition that we'll add for XPFO. Signed-off-by: Tycho Andersen <tycho@docker.com> Reviewed-by: Julien Grall <julien.grall@arm.com> CC: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: Juergen Gross <jgross@suse.com> CC: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-09-18tcp: remove two unused functionsYuchung Cheng1-1/+0
remove tcp_may_send_now and tcp_snd_test that are no longer used Fixes: 840a3cbe8969 ("tcp: remove forward retransmit feature") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18net: Convert int functions to boolJoe Perches1-2/+2
Global function ipv6_rcv_saddr_equal and static functions ipv6_rcv_saddr_equal and ipv4_rcv_saddr_equal currently return int. bool is slightly more descriptive for these functions so change their return type from int to bool. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18driver core: Fix link to device power management documentationGeert Uytterhoeven1-1/+1
Correct location as of commit 2728b2d2e5be4b82 (PM / core / docs: Convert sleep states API document to reST). Fixes: 2728b2d2e5be4b82 (PM / core / docs: Convert sleep states API document to reST) Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-18Merge tag 'drm-amdkfd-next-2017-09-02' of ↵Dave Airlie1-86/+86
git://people.freedesktop.org/~gabbayo/linux into drm-fixes some trivial amdkfd cleanups * tag 'drm-amdkfd-next-2017-09-02' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: pass queue's mqd when destroying mqd drm/amdkfd: remove memset before memcpy uapi linux/kfd_ioctl.h: only use __u32 and __u64
2017-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds5-6/+11
Pull networking fixes from David Miller: 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger. 2) Fix double-free in rmnet driver, from Dan Carpenter. 3) INET connection socket layer can double put request sockets, fix from Eric Dumazet. 4) Don't match collect metadata-mode tunnels if the device is down, from Haishuang Yan. 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in be2net driver, from Suresh Reddy. 6) Fix scaling error in gen_estimator, from Eric Dumazet. 7) Fix 64-bit statistics deadlock in systemport driver, from Florian Fainelli. 8) Fix use-after-free in sctp_sock_dump, from Xin Long. 9) Reject invalid BPF_END instructions in verifier, from Edward Cree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mlxsw: spectrum_router: Only handle IPv4 and IPv6 events Documentation: link in networking docs tcp: fix data delivery rate bpf/verifier: reject BPF_ALU64|BPF_END sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp: fix an use-after-free issue in sctp_sock_dump netvsc: increase default receive buffer size tcp: update skb->skb_mstamp more carefully net: ipv4: fix l3slave check for index returned in IP_PKTINFO net: smsc911x: Quieten netif during suspend net: systemport: Fix 64-bit stats deadlock net: vrf: avoid gcc-4.6 warning qed: remove unnecessary call to memset tg3: clean up redundant initialization of tnapi tls: make tls_sw_free_resources static sctp: potential read out of bounds in sctp_ulpevent_type_enabled() MAINTAINERS: review Renesas DT bindings as well net_sched: gen_estimator: fix scaling error in bytes/packets samples nfp: wait for the NSP resource to appear on boot nfp: wait for board state before talking to the NSP ...
2017-09-15Merge branch '4.14-features' of ↵Linus Torvalds2-297/+15
git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
2017-09-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-3/+59
Pull more KVM updates from Paolo Bonzini: - PPC bugfixes - RCU splat fix - swait races fix - pointless userspace-triggerable BUG() fix - misc fixes for KVM_RUN corner cases - nested virt correctness fixes + one host DoS - some cleanups - clang build fix - fix AMD AVIC with default QEMU command line options - x86 bugfixes * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly kvm: nVMX: Remove nested_vmx_succeed after successful VM-entry kvm,mips: Fix potential swait_active() races kvm,powerpc: Serialize wq active checks in ops->vcpu_kick kvm: Serialize wq active checks in kvm_vcpu_wake_up() kvm,x86: Fix apf_task_wake_one() wq serialization kvm,lapic: Justify use of swait_active() kvm,async_pf: Use swq_has_sleeper() sched/wait: Add swq_has_sleeper() KVM: VMX: Do not BUG() on out-of-bounds guest IRQ KVM: Don't accept obviously wrong gsi values via KVM_IRQFD kvm: nVMX: Don't allow L2 to access the hardware CR8 KVM: trace events: update list of exit reasons KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously KVM: X86: Don't block vCPU if there is pending exception KVM: SVM: Add irqchip_split() checks before enabling AVIC KVM: Add struct kvm_vcpu pointer parameter to get_enable_apicv() KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu() KVM: x86: fix clang build ...
2017-09-15sctp: fix an use-after-free issue in sctp_sock_dumpXin Long1-1/+2
Commit 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") tried to fix an use-after-free issue by checking !sctp_sk(sk)->ep with holding sock and sock lock. But Paolo noticed that endpoint could be destroyed in sctp_rcv without sock lock protection. It means the use-after-free issue still could be triggered when sctp_rcv put and destroy ep after sctp_sock_dump checks !ep, although it's pretty hard to reproduce. I could reproduce it by mdelay in sctp_rcv while msleep in sctp_close and sctp_sock_dump long time. This patch is to add another param cb_done to sctp_for_each_transport and dump ep->assocs with holding tsp after jumping out of transport's traversal in it to avoid this issue. It can also improve sctp diag dump to make it run faster, as no need to save sk into cb->args[5] and keep calling sctp_for_each_transport any more. This patch is also to use int * instead of int for the pos argument in sctp_for_each_transport, which could make postion increment only in sctp_for_each_transport and no need to keep changing cb->args[2] in sctp_sock_filter and sctp_sock_dump any more. Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15sched/wait: Add swq_has_sleeper()Davidlohr Bueso1-2/+56
Which is the equivalent of what we have in regular waitqueues. I'm not crazy about the name, but this also helps us get both apis closer -- which iirc comes originally from the -net folks. We also duplicate the comments for the lockless swait_active(), from wait.h. Future users will make use of this interface. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-14vfs: constify path argument to kernel_read_file_from_pathMimi Zohar1-1/+1
This patch constifies the path argument to kernel_read_file_from_path(). Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-14Merge branch 'work.misc' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc leftovers from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix the __user misannotations in asm-generic get_user/put_user fput: Don't reinvent the wheel but use existing llist API namespace.c: Don't reinvent the wheel but use existing llist API
2017-09-14Merge branch 'work.read_write' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull nowait read support from Al Viro: "Support IOCB_NOWAIT for buffered reads and block devices" * 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: block_dev: support RFW_NOWAIT on block device nodes fs: support RWF_NOWAIT for buffered reads fs: support IOCB_NOWAIT in generic_file_buffered_read fs: pass iocb to do_generic_file_read
2017-09-14Merge branch 'work.mount' of ↵Linus Torvalds1-10/+38
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mount flag updates from Al Viro: "Another chunk of fmount preparations from dhowells; only trivial conflicts for that part. It separates MS_... bits (very grotty mount(2) ABI) from the struct super_block ->s_flags (kernel-internal, only a small subset of MS_... stuff). This does *not* convert the filesystems to new constants; only the infrastructure is done here. The next step in that series is where the conflicts would be; that's the conversion of filesystems. It's purely mechanical and it's better done after the merge, so if you could run something like list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$') sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \ -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \ -e 's/\<MS_NODEV\>/SB_NODEV/g' \ -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \ -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \ -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \ -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \ -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \ -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \ -e 's/\<MS_SILENT\>/SB_SILENT/g' \ -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \ -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \ -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \ -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \ $list and commit it with something along the lines of 'convert filesystems away from use of MS_... constants' as commit message, it would save a quite a bit of headache next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Differentiate mount flags (MS_*) from internal superblock flags VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-09-14Merge branch 'work.set_fs' of ↵Linus Torvalds1-6/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more set_fs removal from Al Viro: "Christoph's 'use kernel_read and friends rather than open-coding set_fs()' series" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: unexport vfs_readv and vfs_writev fs: unexport vfs_read and vfs_write fs: unexport __vfs_read/__vfs_write lustre: switch to kernel_write gadget/f_mass_storage: stop messing with the address limit mconsole: switch to kernel_read btrfs: switch write_buf to kernel_write net/9p: switch p9_fd_read to kernel_write mm/nommu: switch do_mmap_private to kernel_read serial2002: switch serial2002_tty_write to kernel_{read/write} fs: make the buf argument to __kernel_write a void pointer fs: fix kernel_write prototype fs: fix kernel_read prototype fs: move kernel_read to fs/read_write.c fs: move kernel_write to fs/read_write.c autofs4: switch autofs4_write to __kernel_write ashmem: switch to ->read_iter
2017-09-14Merge branch 'work.ipc' of ↵Linus Torvalds6-28/+13
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull ipc compat cleanup and 64-bit time_t from Al Viro: "IPC copyin/copyout sanitizing, including 64bit time_t work from Deepa Dinamani" * 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: utimes: Make utimes y2038 safe ipc: shm: Make shmid_kernel timestamps y2038 safe ipc: sem: Make sem_array timestamps y2038 safe ipc: msg: Make msg_queue timestamps y2038 safe ipc: mqueue: Replace timespec with timespec64 ipc: Make sys_semtimedop() y2038 safe get rid of SYSVIPC_COMPAT on ia64 semtimedop(): move compat to native shmat(2): move compat to native msgrcv(2), msgsnd(2): move compat to native ipc(2): move compat to native ipc: make use of compat ipc_perm helpers semctl(): move compat to native semctl(): separate all layout-dependent copyin/copyout msgctl(): move compat to native msgctl(): split the actual work from copyin/copyout ipc: move compat shmctl to native shmctl: split the work from copyin/copyout
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 18:22:37 +0000