Age | Commit message (Collapse) | Author | Files | Lines |
|
For both IPv4 and IPv6 incoming TCP connections are tracked in a hash
table with a hash over the source & destination addresses and ports.
However, the IPv6 hash is insufficient and can lead to a high rate of
collisions.
The IPv6 hash used an XOR to fit everything into the 96 bits for the
fast jenkins hash, meaning it is possible for an external entity to
ensure the hash collides, thus falling back to a linear search in the
bucket, which is slow.
We take the approach of hash the full length of IPv6 address in
__ipv6_addr_jhash() so that all users can benefit from a more secure
version.
While this may look like it adds overhead, the reality of modern CPUs
means that this is unmeasurable in real world scenarios.
In simulating with llvm-mca, the increase in cycles for the hashing
code was ~16 cycles on Skylake (from a base of ~155), and an extra ~9
on Nehalem (base of ~173).
In commit dd6d2910c5e0 ("netfilter: conntrack: switch to siphash")
netfilter switched from a jenkins hash to a siphash, but even the faster
hsiphash is a more significant overhead (~20-30%) in some preliminary
testing. So, in this patch, we keep to the more conservative approach to
ensure we don't add much overhead per SYN.
In testing, this results in a consistently even spread across the
connection buckets. In both testing and real-world scenarios, we have
not found any measurable performance impact.
Fixes: 08dcdbf6a7b9 ("ipv6: use a stronger hash for tcp")
Signed-off-by: Stewart Smith <trawets@amazon.com>
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230721222410.17914-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
VXLAN-GPE does not add an extra inner Ethernet header. Take that into
account when calculating header length.
This causes problems in skb_tunnel_check_pmtu, where incorrect PMTU is
cached.
In the collect_md mode (which is the only mode that VXLAN-GPE
supports), there's no magic auto-setting of the tunnel interface MTU.
It can't be, since the destination and thus the underlying interface
may be different for each packet.
So, the administrator is responsible for setting the correct tunnel
interface MTU. Apparently, the administrators are capable enough to
calculate that the maximum MTU for VXLAN-GPE is (their_lower_MTU - 36).
They set the tunnel interface MTU to 1464. If you run a TCP stream over
such interface, it's then segmented according to the MTU 1464, i.e.
producing 1514 bytes frames. Which is okay, this still fits the lower
MTU.
However, skb_tunnel_check_pmtu (called from vxlan_xmit_one) uses 50 as
the header size and thus incorrectly calculates the frame size to be
1528. This leads to ICMP too big message being generated (locally),
PMTU of 1450 to be cached and the TCP stream to be resegmented.
The fix is to use the correct actual header size, especially for
skb_tunnel_check_pmtu calculation.
Fixes: e1e5314de08ba ("vxlan: implement GPE")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix building with coredump disabled
- Fix use-after-free in hci_remove_adv_monitor
- Use RCU for hci_conn_params and iterate safely in hci_sync
- Fix locking issues on ISO and SCO
- Fix bluetooth on Intel Macbook 2014
* tag 'for-net-2023-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Use correct address for memcpy()
Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
Bluetooth: SCO: fix sco_conn related locking and validity issues
Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
Bluetooth: coredump: fix building with coredump disabled
Bluetooth: ISO: fix iso_conn related locking and validity issues
Bluetooth: hci_event: call disconnect callback before deleting conn
Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync
====================
Link: https://lore.kernel.org/r/20230720190201.446469-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tp->notsent_lowat can be read locklessly from do_tcp_getsockopt()
and tcp_poll().
Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
do_tcp_getsockopt() reads tp->keepalive_probes while another cpu
might change its value.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
do_tcp_getsockopt() reads tp->keepalive_intvl while another cpu
might change its value.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
do_tcp_getsockopt() reads tp->keepalive_time while another cpu
might change its value.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The btmtk driver uses an IS_ENABLED() check to conditionally compile
the coredump support, but this fails to build because the hdev->dump
member is in an #ifdef:
drivers/bluetooth/btmtk.c: In function 'btmtk_process_coredump':
drivers/bluetooth/btmtk.c:386:30: error: 'struct hci_dev' has no member named 'dump'
386 | schedule_delayed_work(&hdev->dump.dump_timeout,
| ^~
The struct member doesn't really make a huge difference in the total size,
so just remove the #ifdef around it to avoid adding similar checks
around each user.
Fixes: 872f8c253cb9e ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Fixes: 9695ef876fd12 ("Bluetooth: Add support for hci devcoredump")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_update_accept_list_sync iterates over hdev->pend_le_conns and
hdev->pend_le_reports, and waits for controller events in the loop body,
without holding hdev lock.
Meanwhile, these lists and the items may be modified e.g. by
le_scan_cleanup. This can invalidate the list cursor or any other item
in the list, resulting to invalid behavior (eg use-after-free).
Use RCU for the hci_conn_params action lists. Since the loop bodies in
hci_sync block and we cannot use RCU or hdev->lock for the whole loop,
copy list items first and then iterate on the copy. Only the flags field
is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we
read valid values.
Free params everywhere with hci_conn_params_free so the cleanup is
guaranteed to be done properly.
This fixes the following, which can be triggered e.g. by BlueZ new
mgmt-tester case "Add + Remove Device Nowait - Success", or by changing
hci_le_set_cig_params to always return false, and running iso-tester:
==================================================================
BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107)
print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65)
? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
kasan_report (mm/kasan/report.c:538)
? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780)
? mutex_lock (kernel/locking/mutex.c:282)
? __pfx_mutex_lock (kernel/locking/mutex.c:282)
? __pfx_mutex_unlock (kernel/locking/mutex.c:538)
? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861)
hci_cmd_sync_work (net/bluetooth/hci_sync.c:306)
process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)
? __pfx_worker_thread (kernel/workqueue.c:2480)
kthread (kernel/kthread.c:376)
? __pfx_kthread (kernel/kthread.c:331)
ret_from_fork (arch/x86/entry/entry_64.S:314)
</TASK>
Allocated by task 31:
kasan_save_stack (mm/kasan/common.c:46)
kasan_set_track (mm/kasan/common.c:52)
__kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383)
hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277)
hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589)
hci_connect_cis (net/bluetooth/hci_conn.c:2266)
iso_connect_cis (net/bluetooth/iso.c:390)
iso_sock_connect (net/bluetooth/iso.c:899)
__sys_connect (net/socket.c:2003 net/socket.c:2020)
__x64_sys_connect (net/socket.c:2027)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
Freed by task 15:
kasan_save_stack (mm/kasan/common.c:46)
kasan_set_track (mm/kasan/common.c:52)
kasan_save_free_info (mm/kasan/generic.c:523)
__kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244)
__kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800)
hci_conn_params_del (net/bluetooth/hci_core.c:2323)
le_scan_cleanup (net/bluetooth/hci_conn.c:202)
process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)
kthread (kernel/kthread.c:376)
ret_from_fork (arch/x86/entry/entry_64.S:314)
==================================================================
Fixes: e8907f76544f ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
We will remove this restriction in llc_rcv() in the following patch,
which means that the protocol handler must be aware of netns.
if (!net_eq(dev_net(dev), &init_net))
goto drop;
llc_rcv() fetches llc_type_handlers[llc_pdu_type(skb) - 1] and calls it
if not NULL.
If the PDU type is LLC_DEST_CONN, llc_conn_handler() is called to pass
skb to corresponding sockets. Then, we must look up a proper socket in
the same netns with skb->dev.
llc_conn_handler() calls __llc_lookup() to look up a established or
litening socket by __llc_lookup_established() and llc_lookup_listener().
Both functions iterate on a list and call llc_estab_match() or
llc_listener_match() to check if the socket is the correct destination.
However, these functions do not check netns.
Also, bind() and connect() call llc_establish_connection(), which
finally calls __llc_lookup_established(), to check if there is a
conflicting socket.
Let's test netns in llc_estab_match() and llc_listener_match().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Change an errant kernel-doc comment marker (/**) to a regular
comment to prevent a kernel-doc warning.
rsi_91x.h:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Copyright (c) 2017 Redpine Signals Inc.
Fixes: 4c10d56a76bb ("rsi: add header file rsi_91x")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230714045127.18752-10-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Spell a struct member's name correctly to prevent a kernel-doc
warning.
pie.h:38: warning: Function parameter or member 'tupdate' not described in 'pie_params'
Fixes: b42a3d7c7cff ("pie: improve comments and commenting style")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Leslie Monis <lesliemonis@gmail.com>
Cc: "Mohit P. Tahiliani" <tahiliani@nitk.edu.in>
Cc: Gautam Ramakrishnan <gautamramk@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Link: https://lore.kernel.org/r/20230714045127.18752-9-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the struct member's name and the correct format to prevent a
kernel-doc warning.
nsh.h:200: warning: Function parameter or member 'context' not described in 'nsh_md1_ctx'
Fixes: 1f0b7744c505 ("net: add NSH header structures and helpers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Benc <jbenc@redhat.com>
Link: https://lore.kernel.org/r/20230714045127.18752-8-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the corrent function parameter name or format to prevent
kernel-doc warnings.
Add 2 function parameter descriptions to prevent kernel-doc warnings.
llc_pdu.h:278: warning: Function parameter or member 'da' not described in 'llc_pdu_decode_da'
llc_pdu.h:278: warning: Excess function parameter 'sa' description in 'llc_pdu_decode_da'
llc_pdu.h:330: warning: Function parameter or member 'skb' not described in 'llc_pdu_init_as_test_cmd'
llc_pdu.h:379: warning: Function parameter or member 'svcs_supported' not described in 'llc_pdu_init_as_xid_cmd'
llc_pdu.h:379: warning: Function parameter or member 'rx_window' not described in 'llc_pdu_init_as_xid_cmd'
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230714045127.18752-7-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Modify the anonymous enum kernel-doc content so that it doesn't cause
a kernel-doc warning.
inet_frag.h:33: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Fixes: 1ab1934ed80a ("inet: frags: enum the flag definitions and add descriptions")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230714045127.18752-6-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Spell function or struct member names correctly.
Use ':' instead of '-' for struct member entries.
Mark one field as private in kernel-doc.
Add a few entries that were missing.
Fix a typo.
These changes prevent kernel-doc warnings:
devlink.h:252: warning: Function parameter or member 'field_id' not described in 'devlink_dpipe_match'
devlink.h:267: warning: Function parameter or member 'field_id' not described in 'devlink_dpipe_action'
devlink.h:310: warning: Function parameter or member 'match_values_count' not described in 'devlink_dpipe_entry'
devlink.h:355: warning: Function parameter or member 'list' not described in 'devlink_dpipe_table'
devlink.h:374: warning: Function parameter or member 'actions_dump' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'matches_dump' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'entries_dump' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'counters_set_update' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'size_get' not described in 'devlink_dpipe_table_ops'
devlink.h:384: warning: Function parameter or member 'headers' not described in 'devlink_dpipe_headers'
devlink.h:384: warning: Function parameter or member 'headers_count' not described in 'devlink_dpipe_headers'
devlink.h:398: warning: Function parameter or member 'unit' not described in 'devlink_resource_size_params'
devlink.h:487: warning: Function parameter or member 'id' not described in 'devlink_param'
devlink.h:645: warning: Function parameter or member 'overwrite_mask' not described in 'devlink_flash_update_params'
Fixes: 1555d204e743 ("devlink: Support for pipeline debug (dpipe)")
Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction")
Fixes: eabaef1896bc ("devlink: Add devlink_param register and unregister")
Fixes: 5d5b4128c4ca ("devlink: introduce flash update overwrite mask")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Moshe Shemesh <moshe@mellanox.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230714045127.18752-5-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use '@' before the struct member names in kernel-doc notation
to prevent kernel-doc warnings.
codel.h:158: warning: Function parameter or member 'ecn_mark' not described in 'codel_stats'
codel.h:158: warning: Function parameter or member 'ce_mark' not described in 'codel_stats'
Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Dave Taht <dave.taht@bufferbloat.net>
Link: https://lore.kernel.org/r/20230714045127.18752-4-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an enum heading to the kernel-doc comments to prevent
kernel-doc warnings.
cfg802154.h:174: warning: Cannot understand * @WPAN_PHY_FLAG_TRANSMIT_POWER: Indicates that transceiver will support
on line 174 - I thought it was a doc line
cfg802154.h:192: warning: Enum value 'WPAN_PHY_FLAG_TXPOWER' not described in enum 'wpan_phy_flags'
cfg802154.h:192: warning: Excess enum value 'WPAN_PHY_FLAG_TRANSMIT_POWER' description in 'wpan_phy_flags'
Fixes: edea8f7c75ec ("cfg802154: introduce wpan phy flags")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230714045127.18752-3-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change an errant kernel-doc comment marker (/**) to a regular
comment to prevent a kernel-doc warning.
bonding.h:282: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Returns NULL if the net_device does not belong to any of the bond's slaves
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Link: https://lore.kernel.org/r/20230714045127.18752-2-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says[1]:
-------
Speaking of psched_mtu(), I see that net/sched/sch_pie.c is using it
without holding RTNL, so dev->mtu can be changed underneath.
KCSAN could issue a warning.
-------
Annotate dev->mtu with READ_ONCE() so KCSAN don't issue a warning.
[1] https://lore.kernel.org/all/CANn89iJoJO5VtaJ-2=_d2aOQhb0Xw8iBT_Cxqp2HyuS-zj6azw@mail.gmail.com/
v1 -> v2: Fix commit message
Fixes: d4b36210c2e6 ("net: pkt_sched: PIE AQM scheme")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230711021634.561598-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix missing overflow use refcount checks in nf_tables.
2) Do not set IPS_ASSURED for IPS_NAT_CLASH entries in GRE tracker,
from Florian Westphal.
3) Bail out if nf_ct_helper_hash is NULL before registering helper,
from Florent Revest.
4) Use siphash() instead siphash_4u64() to fix performance regression,
also from Florian.
5) Do not allow to add rules to removed chains via ID,
from Thadeu Lima de Souza Cascardo.
6) Fix oob read access in byteorder expression, also from Thadeu.
netfilter pull request 23-07-06
====================
Link: https://lore.kernel.org/r/20230705230406.52201-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and wireguard.
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind"
* tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
nfp: clean mc addresses in application firmware when closing port
selftests: mptcp: pm_nl_ctl: fix 32-bit support
selftests: mptcp: depend on SYN_COOKIES
selftests: mptcp: userspace_pm: report errors with 'remove' tests
selftests: mptcp: userspace_pm: use correct server port
selftests: mptcp: sockopt: return error if wrong mark
selftests: mptcp: sockopt: use 'iptables-legacy' if available
selftests: mptcp: connect: fail if nft supposed to work
mptcp: do not rely on implicit state check in mptcp_listen()
mptcp: ensure subflow is unhashed before cleaning the backlog
s390/qeth: Fix vipa deletion
octeontx-af: fix hardware timestamp configuration
net: dsa: sja1105: always enable the send_meta options
net: dsa: tag_sja1105: fix MAC DA patching from meta frames
net: Replace strlcpy with strscpy
pptp: Fix fib lookup calls.
mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check
net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
xsk: Honor SO_BINDTODEVICE on bind
ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported
...
|
|
Originally this used jhash2() over tuple and folded the zone id,
the pernet hash value, destination port and l4 protocol number into the
32bit seed value.
When the switch to siphash was done, I used an on-stack temporary
buffer to build a suitable key to be hashed via siphash().
But this showed up as performance regression, so I got rid of
the temporary copy and collected to-be-hashed data in 4 u64 variables.
This makes it easy to build tuples that produce the same hash, which isn't
desirable even though chain lengths are limited.
Switch back to plain siphash, but just like with jhash2(), take advantage
of the fact that most of to-be-hashed data is already in a suitable order.
Use an empty struct as annotation in 'struct nf_conntrack_tuple' to mark
last member that can be used as hash input.
The only remaining data that isn't present in the tuple structure are the
zone identifier and the pernet hash: fold those into the key.
Fixes: d2c806abcf0b ("netfilter: conntrack: use siphash_4u64")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Overflow use refcount checks are not complete.
Add helper function to deal with object reference counter tracking.
Report -EMFILE in case UINT_MAX is reached.
nft_use_dec() splats in case that reference counter underflows,
which should not ever happen.
Add nft_use_inc_restore() and nft_use_dec_restore() which are used
to restore reference counter from error and abort paths.
Use u32 in nft_flowtable and nft_object since helper functions cannot
work on bitfields.
Remove the few early incomplete checks now that the helper functions
are in place and used to check for refcount overflow.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"This cycle saw a focus on rxe and bnxt_re drivers:
- Code cleanups for irdma, rxe, rtrs, hns, vmw_pvrdma
- rxe uses workqueues instead of tasklets
- rxe has better compliance around access checks for MRs and rereg_mr
- mana supportst he 'v2' FW interface for RX coalescing
- hfi1 bug fix for stale cache entries in its MR cache
- mlx5 buf fix to handle FW failures when destroying QPs
- erdma HW has a new doorbell allocation mechanism for uverbs that is
secure
- Lots of small cleanups and rework in bnxt_re:
- Use the common mmap functions
- Support disassociation
- Improve FW command flow
- support for 'low latency push'"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (71 commits)
RDMA/bnxt_re: Fix an IS_ERR() vs NULL check
RDMA/bnxt_re: Fix spelling mistake "priviledged" -> "privileged"
RDMA/bnxt_re: Remove duplicated include in bnxt_re/main.c
RDMA/bnxt_re: Refactor code around bnxt_qplib_map_rc()
RDMA/bnxt_re: Remove incorrect return check from slow path
RDMA/bnxt_re: Enable low latency push
RDMA/bnxt_re: Reorg the bar mapping
RDMA/bnxt_re: Move the interface version to chip context structure
RDMA/bnxt_re: Query function capabilities from firmware
RDMA/bnxt_re: Optimize the bnxt_re_init_hwrm_hdr usage
RDMA/bnxt_re: Add disassociate ucontext support
RDMA/bnxt_re: Use the common mmap helper functions
RDMA/bnxt_re: Initialize opcode while sending message
RDMA/cma: Remove NULL check before dev_{put, hold}
RDMA/rxe: Simplify cq->notify code
RDMA/rxe: Fixes mr access supported list
RDMA/bnxt_re: optimize the parameters passed to helper functions
RDMA/bnxt_re: remove redundant cmdq_bitmap
RDMA/bnxt_re: use firmware provided max request timeout
RDMA/bnxt_re: cancel all control path command waiters upon error
...
|
|
This rework sync_interval to be sync_factor as having sync_interval in
the order of seconds is sometimes not disarable.
Wit sync_factor the application can tell how many SDU intervals it wants
to send an announcement with PA, the EA interval is set to 2 times that
so a factor of 24 of BIG SDU interval of 10ms would look like the
following:
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25
Handle: 0x01
Properties: 0x0000
Min advertising interval: 480.000 msec (0x0300)
Max advertising interval: 480.000 msec (0x0300)
Channel map: 37, 38, 39 (0x07)
Own address type: Random (0x01)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
TX power: Host has no preference (0x7f)
Primary PHY: LE 1M (0x01)
Secondary max skip: 0x00
Secondary PHY: LE 2M (0x02)
SID: 0x00
Scan request notifications: Disabled (0x00)
< HCI Command: LE Set Periodic Advertising Parameters (0x08|0x003e) plen 7
Handle: 1
Min interval: 240.00 msec (0x00c0)
Max interval: 240.00 msec (0x00c0)
Properties: 0x0000
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When receiving a scan response there is no way to know if the remote
device is connectable or not, so when it cannot be merged don't
make any assumption and instead just mark it with a new flag defined as
MGMT_DEV_FOUND_SCAN_RSP so userspace can tell it is a standalone
SCAN_RSP.
Link: https://lore.kernel.org/linux-bluetooth/CABBYNZ+CYMsDSPTxBn09Js3BcdC-x7vZFfyLJ3ppZGGwJKmUTw@mail.gmail.com/
Fixes: c70a7e4cc8d2 ("Bluetooth: Add support for Not Connectable flag for Device Found events")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recently, our friends from bluetooth subsystem reported [1] that after
commit 5e2ff6704a27 ("scm: add SO_PASSPIDFD and SCM_PIDFD") scm_recv()
helper become unusable in kernel modules (because it uses unexported
pidfd_prepare() API).
We were aware of this issue and workarounded it in a hard way
by commit 97154bcf4d1b ("af_unix: Kconfig: make CONFIG_UNIX bool").
But recently a new functionality was added in the scope of commit
817efd3cad74 ("Bluetooth: hci_sock: Forward credentials to monitor")
and after that bluetooth can't be compiled as a kernel module.
After some discussion in [1] we decided to split scm_recv() into
two helpers, one won't support SCM_PIDFD (used for unix sockets),
and another one will be completely the same as it was before commit
5e2ff6704a27 ("scm: add SO_PASSPIDFD and SCM_PIDFD").
Link: https://lore.kernel.org/lkml/CAJqdLrpFcga4n7wxBhsFqPQiN8PKFVr6U10fKcJ9W7AcZn+o6Q@mail.gmail.com/ [1]
Fixes: 5e2ff6704a27 ("scm: add SO_PASSPIDFD and SCM_PIDFD")
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230627174314.67688-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller hit a WARN_ON_ONCE(!scm->pid) in scm_pidfd_recv().
In unix_stream_read_generic(), if there is no skb in the queue, we could
bail out the do-while loop without calling scm_set_cred():
1. No skb in the queue
2. sk is non-blocking
or
shutdown(sk, RCV_SHUTDOWN) is called concurrently
or
peer calls close()
If the socket is configured with SO_PASSPIDFD, scm_pidfd_recv() would
populate cmsg with garbage emitting the warning.
Let's skip SCM_PIDFD if scm->pid is NULL in scm_pidfd_recv().
Note another way would be skip calling scm_recv() in such cases, but this
caused a regression resulting in commit 9d797ee2dce1 ("Revert "af_unix:
Call scm_recv() only after scm_set_cred()."").
WARNING: CPU: 1 PID: 3245 at include/net/scm.h:138 scm_pidfd_recv include/net/scm.h:138 [inline]
WARNING: CPU: 1 PID: 3245 at include/net/scm.h:138 scm_recv.constprop.0+0x754/0x850 include/net/scm.h:177
Modules linked in:
CPU: 1 PID: 3245 Comm: syz-executor.1 Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:scm_pidfd_recv include/net/scm.h:138 [inline]
RIP: 0010:scm_recv.constprop.0+0x754/0x850 include/net/scm.h:177
Code: 67 fd e9 55 fd ff ff e8 4a 70 67 fd e9 7f fd ff ff e8 40 70 67 fd e9 3e fb ff ff e8 36 70 67 fd e9 02 fd ff ff e8 8c 3a 20 fd <0f> 0b e9 fe fb ff ff e8 50 70 67 fd e9 2e f9 ff ff e8 46 70 67 fd
RSP: 0018:ffffc90009af7660 EFLAGS: 00010216
RAX: 00000000000000a1 RBX: ffff888041e58a80 RCX: ffffc90003852000
RDX: 0000000000040000 RSI: ffffffff842675b4 RDI: 0000000000000007
RBP: ffffc90009af7810 R08: 0000000000000007 R09: 0000000000000013
R10: 00000000000000f8 R11: 0000000000000001 R12: ffffc90009af7db0
R13: 0000000000000000 R14: ffff888041e58a88 R15: 1ffff9200135eecc
FS: 00007f6b7113f640(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6b7111de38 CR3: 0000000012a6e002 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
unix_stream_read_generic+0x5fe/0x1f50 net/unix/af_unix.c:2830
unix_stream_recvmsg+0x194/0x1c0 net/unix/af_unix.c:2880
sock_recvmsg_nosec net/socket.c:1019 [inline]
sock_recvmsg+0x188/0x1d0 net/socket.c:1040
____sys_recvmsg+0x210/0x610 net/socket.c:2712
___sys_recvmsg+0xff/0x190 net/socket.c:2754
do_recvmmsg+0x25d/0x6c0 net/socket.c:2848
__sys_recvmmsg net/socket.c:2927 [inline]
__do_sys_recvmmsg net/socket.c:2950 [inline]
__se_sys_recvmmsg net/socket.c:2943 [inline]
__x64_sys_recvmmsg+0x224/0x290 net/socket.c:2943
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f6b71da2e5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007f6b7113ecc8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000004bc050 RCX: 00007f6b71da2e5d
RDX: 0000000000000007 RSI: 0000000020006600 RDI: 000000000000000b
RBP: 00000000004bc050 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000120 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000006e R14: 00007f6b71e03530 R15: 0000000000000000
</TASK>
Fixes: 5e2ff6704a27 ("scm: add SO_PASSPIDFD and SCM_PIDFD")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230627174314.67688-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Linux 6.4
Resolve conflicts between rdma rc and next in rxe_cq matching linux-next:
drivers/infiniband/sw/rxe/rxe_cq.c:
https://lore.kernel.org/r/20230622115246.365d30ad@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Merge in late fixes to prepare for the 6.5 net-next PR.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported a warning in __local_bh_enable_ip(). [0]
Commit 8d61f926d420 ("netlink: fix potential deadlock in
netlink_set_err()") converted read_lock(&nl_table_lock) to
read_lock_irqsave() in __netlink_diag_dump() to prevent a deadlock.
However, __netlink_diag_dump() calls sock_i_ino() that uses
read_lock_bh() and read_unlock_bh(). If CONFIG_TRACE_IRQFLAGS=y,
read_unlock_bh() finally enables IRQ even though it should stay
disabled until the following read_unlock_irqrestore().
Using read_lock() in sock_i_ino() would trigger a lockdep splat
in another place that was fixed in commit f064af1e500a ("net: fix
a lockdep splat"), so let's add __sock_i_ino() that would be safe
to use under BH disabled.
[0]:
WARNING: CPU: 0 PID: 5012 at kernel/softirq.c:376 __local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
Modules linked in:
CPU: 0 PID: 5012 Comm: syz-executor487 Not tainted 6.4.0-rc7-syzkaller-00202-g6f68fc395f49 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
RIP: 0010:__local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
Code: 45 bf 01 00 00 00 e8 91 5b 0a 00 e8 3c 15 3d 00 fb 65 8b 05 ec e9 b5 7e 85 c0 74 58 5b 5d c3 65 8b 05 b2 b6 b4 7e 85 c0 75 a2 <0f> 0b eb 9e e8 89 15 3d 00 eb 9f 48 89 ef e8 6f 49 18 00 eb a8 0f
RSP: 0018:ffffc90003a1f3d0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000201 RCX: 1ffffffff1cf5996
RDX: 0000000000000000 RSI: 0000000000000201 RDI: ffffffff8805c6f3
RBP: ffffffff8805c6f3 R08: 0000000000000001 R09: ffff8880152b03a3
R10: ffffed1002a56074 R11: 0000000000000005 R12: 00000000000073e4
R13: dffffc0000000000 R14: 0000000000000002 R15: 0000000000000000
FS: 0000555556726300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000045ad50 CR3: 000000007c646000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sock_i_ino+0x83/0xa0 net/core/sock.c:2559
__netlink_diag_dump+0x45c/0x790 net/netlink/diag.c:171
netlink_diag_dump+0xd6/0x230 net/netlink/diag.c:207
netlink_dump+0x570/0xc50 net/netlink/af_netlink.c:2269
__netlink_dump_start+0x64b/0x910 net/netlink/af_netlink.c:2374
netlink_dump_start include/linux/netlink.h:329 [inline]
netlink_diag_handler_dump+0x1ae/0x250 net/netlink/diag.c:238
__sock_diag_cmd net/core/sock_diag.c:238 [inline]
sock_diag_rcv_msg+0x31e/0x440 net/core/sock_diag.c:269
netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2547
sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x925/0xe30 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:747
____sys_sendmsg+0x71c/0x900 net/socket.c:2503
___sys_sendmsg+0x110/0x1b0 net/socket.c:2557
__sys_sendmsg+0xf7/0x1c0 net/socket.c:2586
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5303aaabb9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc7506e548 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5303aaabb9
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00007f5303a6ed60 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5303a6edf0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Fixes: 8d61f926d420 ("netlink: fix potential deadlock in netlink_set_err()")
Reported-by: syzbot+5da61cf6a9bc1902d422@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=5da61cf6a9bc1902d422
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230626164313.52528-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When using the felix driver (the only one which supports UC filtering
and MC filtering) as a DSA master for a random other DSA switch, one can
see the following stack trace when the downstream switch ports join a
VLAN-aware bridge:
=============================
WARNING: suspicious RCU usage
-----------------------------
net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage!
stack backtrace:
Workqueue: dsa_ordered dsa_slave_switchdev_event_work
Call trace:
lockdep_rcu_suspicious+0x170/0x210
vlan_for_each+0x8c/0x188
dsa_slave_sync_uc+0x128/0x178
__hw_addr_sync_dev+0x138/0x158
dsa_slave_set_rx_mode+0x58/0x70
__dev_set_rx_mode+0x88/0xa8
dev_uc_add+0x74/0xa0
dsa_port_bridge_host_fdb_add+0xec/0x180
dsa_slave_switchdev_event_work+0x7c/0x1c8
process_one_work+0x290/0x568
What it's saying is that vlan_for_each() expects rtnl_lock() context and
it's not getting it, when it's called from the DSA master's ndo_set_rx_mode().
The caller of that - dsa_slave_set_rx_mode() - is the slave DSA
interface's dsa_port_bridge_host_fdb_add() which comes from the deferred
dsa_slave_switchdev_event_work().
We went to great lengths to avoid the rtnl_lock() context in that call
path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from
dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not
an option due to the possibility of deadlocking when calling
dsa_flush_workqueue() from the call paths that do hold rtnl_lock() -
basically all of them.
So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(),
the state of the 8021q driver on this device is really not protected
from concurrent access by anything.
Looking at net/8021q/, I don't think that vlan_info->vid_list was
particularly designed with RCU traversal in mind, so introducing an RCU
read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so
easy, and it also wouldn't be exactly what we need anyway.
In general I believe that the solution isn't in net/8021q/ anyway;
vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock()
to be held per se - since it's not a netdev state change that we're
blocking, but rather, just concurrent additions/removals to a VLAN list.
We don't even need sleepable context - the callback of vlan_for_each()
just schedules deferred work.
The proposed escape is to remove the dependency on vlan_for_each() and
to open-code a non-sleepable, rtnl-free alternative to that, based on
copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and
.ndo_vlan_rx_kill_vid().
Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
1) Allow slightly larger IPVS connection table size from Kconfig for
64-bit arch, from Abhijeet Rastogi.
2) Since IPVS connection table might be larger than 2^20 after previous
patch, allow to limit it depending on the available memory.
Moreover, use kvmalloc. From Julian Anastasov.
3) Do not rebuild VLAN header in nft_payload when matching source and
destination MAC address.
4) Remove nested rcu read lock side in ip_set_test(), from Florian Westphal.
5) Allow to update set size, also from Florian.
6) Improve NAT tuple selection when connection is closing,
from Florian Westphal.
7) Support for resetting set element stateful expression, from Phil Sutter.
8) Use NLA_POLICY_MAX to narrow down maximum attribute value in nf_tables,
from Florian Westphal.
* tag 'nf-next-23-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: limit allowed range via nla_policy
netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET
netfilter: snat: evict closing tcp entries on reply tuple collision
netfilter: nf_tables: permit update of set size
netfilter: ipset: remove rcu_read_lock_bh pair from ip_set_test
netfilter: nft_payload: rebuild vlan header when needed
ipvs: dynamically limit the connection hash table
ipvs: increase ip_vs_conn_tab_bits range for 64BIT
====================
Link: https://lore.kernel.org/r/20230626064749.75525-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that set->nelems is always updated permit update of the sets max size.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Remove ->sendpage() and ->sendpage_locked(). sendmsg() with
MSG_SPLICE_PAGES should be used instead. This allows multiple pages and
multipage folios to be passed through.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-afs@lists.infradead.org
cc: mptcp@lists.linux.dev
cc: rds-devel@oss.oracle.com
cc: tipc-discussion@lists.sourceforge.net
cc: virtualization@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20230623225513.2732256-16-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next
Miquel Raynal says:
====================
Core WPAN changes:
- Support for active scans
- Support for answering BEACON_REQ
- Specific MLME handling for limited devices
WPAN driver changes:
- ca8210:
- Flag the devices as limited
- Remove stray gpiod_unexport() call
* tag 'ieee802154-for-net-next-2023-06-23' of gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next:
ieee802154: ca8210: Remove stray gpiod_unexport() call
ieee802154: ca8210: Flag the driver as being limited
net: ieee802154: Handle limited devices with only datagram support
mac802154: Handle received BEACON_REQ
ieee802154: Add support for allowing to answer BEACON_REQ
mac802154: Handle active scanning
ieee802154: Add support for user active scan requests
====================
Link: https://lore.kernel.org/r/20230623195506.40b87b5f@xps-13
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-06-23
We've added 49 non-merge commits during the last 24 day(s) which contain
a total of 70 files changed, 1935 insertions(+), 442 deletions(-).
The main changes are:
1) Extend bpf_fib_lookup helper to allow passing the route table ID,
from Louis DeLosSantos.
2) Fix regsafe() in verifier to call check_ids() for scalar registers,
from Eduard Zingerman.
3) Extend the set of cpumask kfuncs with bpf_cpumask_first_and()
and a rework of bpf_cpumask_any*() kfuncs. Additionally,
add selftests, from David Vernet.
4) Fix socket lookup BPF helpers for tc/XDP to respect VRF bindings,
from Gilad Sever.
5) Change bpf_link_put() to use workqueue unconditionally to fix it
under PREEMPT_RT, from Sebastian Andrzej Siewior.
6) Follow-ups to address issues in the bpf_refcount shared ownership
implementation, from Dave Marchevsky.
7) A few general refactorings to BPF map and program creation permissions
checks which were part of the BPF token series, from Andrii Nakryiko.
8) Various fixes for benchmark framework and add a new benchmark
for BPF memory allocator to BPF selftests, from Hou Tao.
9) Documentation improvements around iterators and trusted pointers,
from Anton Protopopov.
10) Small cleanup in verifier to improve allocated object check,
from Daniel T. Lee.
11) Improve performance of bpf_xdp_pointer() by avoiding access
to shared_info when XDP packet does not have frags,
from Jesper Dangaard Brouer.
12) Silence a harmless syzbot-reported warning in btf_type_id_size(),
from Yonghong Song.
13) Remove duplicate bpfilter_umh_cleanup in favor of umd_cleanup_helper,
from Jarkko Sakkinen.
14) Fix BPF selftests build for resolve_btfids under custom HOSTCFLAGS,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
bpf, docs: Document existing macros instead of deprecated
bpf, docs: BPF Iterator Document
selftests/bpf: Fix compilation failure for prog vrf_socket_lookup
selftests/bpf: Add vrf_socket_lookup tests
bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings
bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint
bpf: Factor out socket lookup functions for the TC hookpoint.
selftests/bpf: Set the default value of consumer_cnt as 0
selftests/bpf: Ensure that next_cpu() returns a valid CPU number
selftests/bpf: Output the correct error code for pthread APIs
selftests/bpf: Use producer_cnt to allocate local counter array
xsk: Remove unused inline function xsk_buff_discard()
bpf: Keep BPF_PROG_LOAD permission checks clear of validations
bpf: Centralize permissions checks for all BPF map types
bpf: Inline map creation logic in map_create() function
bpf: Move unprivileged checks into map_create() and bpf_prog_load()
bpf: Remove in_atomic() from bpf_link_put().
selftests/bpf: Verify that check_ids() is used for scalars in regsafe()
bpf: Verify scalar ids mapping in regsafe() using check_ids()
selftests/bpf: Check if mark_chain_precision() follows scalar ids
...
====================
Link: https://lore.kernel.org/r/20230623211256.8409-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Notable changes this time around:
MAINTAINERS
- add missing driver git trees
ath11k
- factory test mode support
iwlwifi
- config rework to drop test devices and
split the different families
- major update for new firmware and MLO
stack
- initial multi-link reconfiguration suppor
- multi-BSSID and MLO improvements
other
- fix the last few W=1 warnings from GCC 13
- merged wireless tree to avoid conflicts
* tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (245 commits)
wifi: ieee80211: fix erroneous NSTR bitmap size checks
wifi: rtlwifi: cleanup USB interface
wifi: rtlwifi: simplify LED management
wifi: ath10k: improve structure padding
wifi: ath9k: convert msecs to jiffies where needed
wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow
wifi: iwlwifi: mvm: update two most recent GTKs on D3 resume flow
wifi: iwlwifi: mvm: Refactor security key update after D3
wifi: mac80211: mark keys as uploaded when added by the driver
wifi: iwlwifi: remove support of A0 version of FM RF
wifi: iwlwifi: cfg: clean up Bz module firmware lines
wifi: iwlwifi: pcie: add device id 51F1 for killer 1675
wifi: iwlwifi: bump FW API to 83 for AX/BZ/SC devices
wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constants
wifi: iwlwifi: also unify Ma device configurations
wifi: iwlwifi: also unify Sc device configurations
wifi: iwlwifi: unify Bz/Gl device configurations
wifi: iwlwifi: pcie: also drop jacket from info macro
wifi: iwlwifi: remove support for *nJ devices
wifi: iwlwifi: don't load old firmware for 22000
...
====================
Link: https://lore.kernel.org/r/20230622185602.147650-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
tools/testing/selftests/net/fcnal-test.sh
d7a2fc1437f7 ("selftests: net: fcnal-test: check if FIPS mode is enabled")
dd017c72dde6 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.")
https://lore.kernel.org/all/5007b52c-dd16-dbf6-8d64-b9701bfa498b@tessares.net/
https://lore.kernel.org/all/20230619105427.4a0df9b3@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
This is v3, including a crash fix for patch 01/14.
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix UDP segmentation with IPVS tunneled traffic, from Terin Stock.
2) Fix chain binding transaction logic, add a bound flag to rule
transactions. Remove incorrect logic in nft_data_hold() and
nft_data_release().
3) Add a NFT_TRANS_PREPARE_ERROR deactivate state to deal with releasing
the set/chain as a follow up to 1240eb93f061 ("netfilter: nf_tables:
incorrect error path handling with NFT_MSG_NEWRULE")
4) Drop map element references from preparation phase instead of
set destroy path, otherwise bogus EBUSY with transactions such as:
flush chain ip x y
delete chain ip x w
where chain ip x y contains jump/goto from set elements.
5) Pipapo set type does not regard generation mask from the walk
iteration.
6) Fix reference count underflow in set element reference to
stateful object.
7) Several patches to tighten the nf_tables API:
- disallow set element updates of bound anonymous set
- disallow unbound anonymous set/chain at the end of transaction.
- disallow updates of anonymous set.
- disallow timeout configuration for anonymous sets.
8) Fix module reference leak in chain updates.
9) Fix nfnetlink_osf module autoload.
10) Fix deletion of basechain when NFTA_CHAIN_HOOK is specified as
in iptables-nft.
This Netfilter batch is larger than usual at this stage, I am aware we
are fairly late in the -rc cycle, if you prefer to route them through
net-next, please let me know.
netfilter pull request 23-06-21
* tag 'nf-23-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Fix for deleting base chains with payload
netfilter: nfnetlink_osf: fix module autoload
netfilter: nf_tables: drop module reference after updating chain
netfilter: nf_tables: disallow timeout for anonymous sets
netfilter: nf_tables: disallow updates of anonymous sets
netfilter: nf_tables: reject unbound chain set before commit phase
netfilter: nf_tables: reject unbound anonymous set before commit phase
netfilter: nf_tables: disallow element updates of bound anonymous sets
netfilter: nf_tables: fix underflow in object reference counter
netfilter: nft_set_pipapo: .walk does not deal with generations
netfilter: nf_tables: drop map element references from preparation phase
netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain
netfilter: nf_tables: fix chain binding transaction logic
ipvs: align inner_mac_header for encapsulation
====================
Link: https://lore.kernel.org/r/20230621100731.68068-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Retrieve the Power Spectral Density (PSD) value from RNR AP
information entry and store it so it could be used by the drivers.
PSD value is explained in Section 9.4.2.170 of Draft
P802.11Revme_D2.0.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.067ded2b8fc3.I9f407ab5800cbb07045a0537a513012960ced740@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We shouldn't refer to CPTCFG_, that's for backports, in
mainline that's just CONFIG_. Fix it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct mctp_route'
from 72 to 64 bytes.
It saves a few bytes of memory and is more cache-line friendly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/393ad1a5aef0aa28d839eeb3d7477da0e0eeb0b0.1687080803.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new list to track set transaction and to check for unbound
anonymous sets before entering the commit phase.
Bail out at the end of the transaction handling if an anonymous set
remains unbound.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
set .destroy callback releases the references to other objects in maps.
This is very late and it results in spurious EBUSY errors. Drop refcount
from the preparation phase instead, update set backend not to drop
reference counter from set .destroy path.
Exceptions: NFT_TRANS_PREPARE_ERROR does not require to drop the
reference counter because the transaction abort path releases the map
references for each element since the set is unbound. The abort path
also deals with releasing reference counter for new elements added to
unbound sets.
Fixes: 591054469b3e ("netfilter: nf_tables: revisit chain/object refcounting from elements")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new state to deal with rule expressions deactivation from the
newrule error path, otherwise the anonymous set remains in the list in
inactive state for the next generation. Mark the set/chain transaction
as unbound so the abort path releases this object, set it as inactive in
the next generation so it is not reachable anymore from this transaction
and reference counter is dropped.
Fixes: 1240eb93f061 ("netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add bound flag to rule and chain transactions as in 6a0a8d10a366
("netfilter: nf_tables: use-after-free in failing rule with bound set")
to skip them in case that the chain is already bound from the abort
path.
This patch fixes an imbalance in the chain use refcnt that triggers a
WARN_ON on the table and chain destroy path.
This patch also disallows nested chain bindings, which is not
supported from userspace.
The logic to deal with chain binding in nft_data_hold() and
nft_data_release() is not correct. The NFT_TRANS_PREPARE state needs a
special handling in case a chain is bound but next expressions in the
same rule fail to initialize as described by 1240eb93f061 ("netfilter:
nf_tables: incorrect error path handling with NFT_MSG_NEWRULE").
The chain is left bound if rule construction fails, so the objects
stored in this chain (and the chain itself) are released by the
transaction records from the abort path, follow up patch ("netfilter:
nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain")
completes this error handling.
When deleting an existing rule, chain bound flag is set off so the
rule expression .destroy path releases the objects.
Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
ipsec-2023-06-20
|
|
Since the introduction of the OF bindings, DSA has always had a policy that
in case multiple CPU ports are present in the device tree, the numerically
smallest one is always chosen.
The MT7530 switch family, except the switch on the MT7988 SoC, has 2 CPU
ports, 5 and 6, where port 6 is preferable on the MT7531BE switch because
it has higher bandwidth.
The MT7530 driver developers had 3 options:
- to modify DSA when the MT7531 switch support was introduced, such as to
prefer the better port
- to declare both CPU ports in device trees as CPU ports, and live with the
sub-optimal performance resulting from not preferring the better port
- to declare just port 6 in the device tree as a CPU port
Of course they chose the path of least resistance (3rd option), kicking the
can down the road. The hardware description in the device tree is supposed
to be stable - developers are not supposed to adopt the strategy of
piecemeal hardware description, where the device tree is updated in
lockstep with the features that the kernel currently supports.
Now, as a result of the fact that they did that, any attempts to modify the
device tree and describe both CPU ports as CPU ports would make DSA change
its default selection from port 6 to 5, effectively resulting in a
performance degradation visible to users with the MT7531BE switch as can be
seen below.
Without preferring port 6:
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-20.00 sec 374 MBytes 157 Mbits/sec 734 sender
[ 5][TX-C] 0.00-20.00 sec 373 MBytes 156 Mbits/sec receiver
[ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 778 Mbits/sec 0 sender
[ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 777 Mbits/sec receiver
With preferring port 6:
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 856 Mbits/sec 273 sender
[ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 855 Mbits/sec receiver
[ 7][RX-C] 0.00-20.00 sec 1.72 GBytes 737 Mbits/sec 15 sender
[ 7][RX-C] 0.00-20.00 sec 1.71 GBytes 736 Mbits/sec receiver
Using one port for WAN and the other ports for LAN is a very popular use
case which is what this test emulates.
As such, this change proposes that we retroactively modify stable kernels
(which don't support the modification of the CPU port assignments, so as to
let user space fix the problem and restore the throughput) to keep the
mt7530 driver preferring port 6 even with device trees where the hardware
is more fully described.
Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|