summaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)AuthorFilesLines
2023-02-23sctp: add a refcnt in sctp_stream_priorities to avoid a nested loopXin Long1-0/+1
With this refcnt added in sctp_stream_priorities, we don't need to traverse all streams to check if the prio is used by other streams when freeing one stream's prio in sctp_sched_prio_free_sid(). This can avoid a nested loop (up to 65535 * 65535), which may cause a stuck as Ying reported: watchdog: BUG: soft lockup - CPU#23 stuck for 26s! [ksoftirqd/23:136] Call Trace: <TASK> sctp_sched_prio_free_sid+0xab/0x100 [sctp] sctp_stream_free_ext+0x64/0xa0 [sctp] sctp_stream_free+0x31/0x50 [sctp] sctp_association_free+0xa5/0x200 [sctp] Note that it doesn't need to use refcount_t type for this counter, as its accessing is always protected under the sock lock. v1->v2: - add a check in sctp_sched_prio_set to avoid the possible prio_head refcnt overflow. Fixes: 9ed7bfc79542 ("sctp: fix memory leak in sctp_stream_outq_migrate()") Reported-by: Ying Xu <yinxu@redhat.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/825eb0c905cb864991eba335f4a2b780e543f06b.1677085641.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski1-1/+0
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix broken listing of set elements when table has an owner. 2) Fix conntrack refcount leak in ctnetlink with related conntrack entries, from Hangyu Hua. 3) Fix use-after-free/double-free in ctnetlink conntrack insert path, from Florian Westphal. 4) Fix ip6t_rpfilter with VRF, from Phil Sutter. 5) Fix use-after-free in ebtables reported by syzbot, also from Florian. 6) Use skb->len in xt_length to deal with IPv6 jumbo packets, from Xin Long. 7) Fix NETLINK_LISTEN_ALL_NSID with ctnetlink, from Florian Westphal. 8) Fix memleak in {ip_,ip6_,arp_}tables in ENOMEM error case, from Pavel Tikhomirov. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: x_tables: fix percpu counter block leak on error path when creating new netns netfilter: ctnetlink: make event listener tracking global netfilter: xt_length: use skb len to match in length_mt6 netfilter: ebtables: fix table blob use-after-free netfilter: ip6t_rpfilter: Fix regression with VRF interfaces netfilter: conntrack: fix rmmod double-free race netfilter: ctnetlink: fix possible refcount leak in ctnetlink_create_conntrack() netfilter: nf_tables: allow to fetch set elements when table has an owner ==================== Link: https://lore.kernel.org/r/20230222092137.88637-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-22netfilter: ctnetlink: make event listener tracking globalFlorian Westphal1-1/+0
pernet tracking doesn't work correctly because other netns might have set NETLINK_LISTEN_ALL_NSID on its event socket. In this case its expected that events originating in other net namespaces are also received. Making pernet-tracking work while also honoring NETLINK_LISTEN_ALL_NSID requires much more intrusive changes both in netlink and nfnetlink, f.e. adding a 'setsockopt' callback that lets nfnetlink know that the event socket entered (or left) ALL_NSID mode. Move to global tracking instead: if there is an event socket anywhere on the system, all net namespaces which have conntrack enabled and use autobind mode will allocate the ecache extension. netlink_has_listeners() returns false only if the given group has no subscribers in any net namespace, the 'net' argument passed to nfnetlink_has_listeners is only used to derive the protocol (nfnetlink), it has no other effect. For proper NETLINK_LISTEN_ALL_NSID-aware pernet tracking of event listeners a new netlink_has_net_listeners() is also needed. Fixes: 90d1daa45849 ("netfilter: conntrack: add nf_conntrack_events autodetect mode") Reported-by: Bryce Kahle <bryce.kahle@datadoghq.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-02-21page_pool: add a comment explaining the fragment counter usageIlias Apalodimas1-0/+10
When reading the page_pool code the first impression is that keeping two separate counters, one being the page refcnt and the other being fragment pp_frag_count, is counter-intuitive. However without that fragment counter we don't know when to reliably destroy or sync the outstanding DMA mappings. So let's add a comment explaining this part. Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/r/20230217222130.85205-1-ilias.apalodimas@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-20net/sched: cls_api: Support hardware miss to tc actionPaul Blakey3-14/+23
For drivers to support partial offload of a filter's action list, add support for action miss to specify an action instance to continue from in sw. CT action in particular can't be fully offloaded, as new connections need to be handled in software. This imposes other limitations on the actions that can be offloaded together with the CT action, such as packet modifications. Assign each action on a filter's action list a unique miss_cookie which drivers can then use to fill action_miss part of the tc skb extension. On getting back this miss_cookie, find the action instance with relevant cookie and continue classifying from there. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-20net/sched: Rename user cookie and act cookiePaul Blakey2-3/+3
struct tc_action->act_cookie is a user defined cookie, and the related struct flow_action_entry->act_cookie is used as an handle similar to struct flow_cls_offload->cookie. Rename tc_action->act_cookie to user_cookie, and flow_action_entry->act_cookie to cookie so their names would better fit their usage. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-20Merge tag 'ieee802154-for-net-next-2023-02-20' of ↵Jakub Kicinski3-1/+190
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next Stefan Schmidt says: ==================== pull-request: ieee802154-next 2023-02-20 Miquel Raynal build upon his earlier work and introduced two new features into the ieee802154 stack. Beaconing to announce existing PAN's and passive scanning to discover the beacons and associated PAN's. The matching changes to the userspace configuration tool have been posted as well and will be released together with the kernel release. Arnd Bergmann and Dmitry Torokhov worked on converting the at86rf230 and cc2520 drivers away from the unused platform_data usage and towards the new gpiod API. (I had to add a revert as Dmitry found a regression on an already pushed tree on my side). Changes since v1 (pull request 2023-02-02) - Netlink API extack and NLA_POLICY* usage as suggested by Jakub - Removed always true condition found by kernel test robot - Simplify device removal with running background job for scanning - Fix problems with beacon sending in some cases by using the MLME tx path * tag 'ieee802154-for-net-next-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next: ieee802154: Drop device trackers mac802154: Fix an always true condition mac802154: Send beacons using the MLME Tx path ieee802154: Change error code on monitor scan netlink request ieee802154: Convert scan error messages to extack ieee802154: Use netlink policies when relevant on scan parameters ieee802154: at86rf230: switch to using gpiod API ieee802154: at86rf230: drop support for platform data Revert "at86rf230: convert to gpio descriptors" cc2520: move to gpio descriptors mac802154: Avoid superfluous endianness handling at86rf230: convert to gpio descriptors mac802154: Handle basic beaconing ieee802154: Add support for user beaconing requests mac802154: Handle passive scanning mac802154: Add MLME Tx locked helpers mac802154: Prepare forcing specific symbol duration ieee802154: Introduce a helper to validate a channel ieee802154: Define a beacon frame header ieee802154: Add support for user scanning requests ==================== Link: https://lore.kernel.org/r/20230220213749.386451-1-stefan@datenfreihafen.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-20net: make default_rps_mask a per netns attributePaolo Abeni1-0/+5
That really was meant to be a per netns attribute from the beginning. The idea is that once proper isolation is in place in the main namespace, additional demux in the child namespaces will be redundant. Let's make child netns default rps mask empty by default. To avoid bloating the netns with a possibly large cpumask, allocate it on-demand during the first write operation. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextDavid S. Miller2-0/+9
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter updates for net-next: 1) Add safeguard to check for NULL tupe in objects updates via NFT_MSG_NEWOBJ, this should not ever happen. From Alok Tiwari. 2) Incorrect pointer check in the new destroy rule command, from Yang Yingliang. 3) Incorrect status bitcheck in nf_conntrack_udp_packet(), from Florian Westphal. 4) Simplify seq_print_acct(), from Ilia Gavrilov. 5) Use 2-arg optimal variant of kfree_rcu() in IPVS, from Julian Anastasov. 6) TCP connection enters CLOSE state in conntrack for locally originated TCP reset packet from the reject target, from Florian Westphal. The fixes #2 and #3 in this series address issues from the previous pull nf-next request in this net-next cycle. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-20ipv6: icmp6: add SKB_DROP_REASON_IPV6_NDISC_NS_OTHERHOSTEric Dumazet1-0/+5
Hosts can often receive neighbour discovery messages that are not for them. Use a dedicated drop reason to make clear the packet is dropped for this normal case. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-20ipv6: icmp6: add SKB_DROP_REASON_IPV6_NDISC_BAD_OPTIONSEric Dumazet1-0/+3
This is a generic drop reason for any error detected in ndisc_parse_options(). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-17netfilter: let reset rules clean out conntrack entriesFlorian Westphal1-0/+8
iptables/nftables support responding to tcp packets with tcp resets. The generated tcp reset packet passes through both output and postrouting netfilter hooks, but conntrack will never see them because the generated skb has its ->nfct pointer copied over from the packet that triggered the reset rule. If the reset rule is used for established connections, this may result in the conntrack entry to be around for a very long time (default timeout is 5 days). One way to avoid this would be to not copy the nf_conn pointer so that the rest packet passes through conntrack too. Problem is that output rules might not have the same conntrack zone setup as the prerouting ones, so its possible that the reset skb won't find the correct entry. Generating a template entry for the skb seems error prone as well. Add an explicit "closing" function that switches a confirmed conntrack entry to closed state and wire this up for tcp. If the entry isn't confirmed, no action is needed because the conntrack entry will never be committed to the table. Reported-by: Russel King <linux@armlinux.org.uk> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-02-17Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+13
Some of the devlink bits were tricky, but I think I got it right. Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-16Merge tag 'wireless-next-2023-03-16' of ↵Jakub Kicinski2-15/+125
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Major stack changes: * EHT channel puncturing support (client & AP) * some support for AP MLD without mac80211 * fixes for A-MSDU on mesh connections Major driver changes: iwlwifi * EHT rate reporting * Bump FW API to 74 for AX devices * STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware mt76 * switch to using page pool allocator * mt7996 EHT (Wi-Fi 7) support * Wireless Ethernet Dispatch (WED) reset support libertas * WPS enrollee support brcmfmac * Rename Cypress 89459 to BCM4355 * BCM4355 and BCM4377 support mwifiex * SD8978 chipset support rtl8xxxu * LED support ath12k * new driver for Qualcomm Wi-Fi 7 devices ath11k * IPQ5018 support * Fine Timing Measurement (FTM) responder role support * channel 177 support ath10k * store WLAN firmware version in SMEM image table * tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits) wifi: brcmfmac: p2p: Introduce generic flexible array frame member wifi: mac80211: add documentation for amsdu_mesh_control wifi: cfg80211: remove gfp parameter from cfg80211_obss_color_collision_notify description wifi: mac80211: always initialize link_sta with sta wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta() wifi: cfg80211: Set SSID if it is not already set wifi: rtw89: move H2C of del_pkt_offload before polling FW status ready wifi: rtw89: use readable return 0 in rtw89_mac_cfg_ppdu_status() wifi: rtw88: usb: drop now unnecessary URB size check wifi: rtw88: usb: send Zero length packets if necessary wifi: rtw88: usb: Set qsel correctly wifi: mac80211: fix off-by-one link setting wifi: mac80211: Fix for Rx fragmented action frames wifi: mac80211: avoid u32_encode_bits() warning wifi: mac80211: Don't translate MLD addresses for multicast wifi: cfg80211: call reg_notifier for self managed wiphy from driver hint wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify wifi: nl80211: Allow authentication frames and set keys on NAN interface wifi: mac80211: fix non-MLO station association wifi: mac80211: Allow NSS change only up to capability ... ==================== Link: https://lore.kernel.org/r/20230216105406.208416-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-16net/sched: act_connmark: transition to percpu stats and rcuPedro Tammela1-2/+7
The tc action act_connmark was using shared stats and taking the per action lock in the datapath. Improve it by using percpu stats and rcu. perf before: - 13.55% tcf_connmark_act - 81.18% _raw_spin_lock 80.46% native_queued_spin_lock_slowpath perf after: - 2.85% tcf_connmark_act tdc results: 1..15 ok 1 2002 - Add valid connmark action with defaults ok 2 56a5 - Add valid connmark action with control pass ok 3 7c66 - Add valid connmark action with control drop ok 4 a913 - Add valid connmark action with control pipe ok 5 bdd8 - Add valid connmark action with control reclassify ok 6 b8be - Add valid connmark action with control continue ok 7 d8a6 - Add valid connmark action with control jump ok 8 aae8 - Add valid connmark action with zone argument ok 9 2f0b - Add valid connmark action with invalid zone argument ok 10 9305 - Add connmark action with unsupported argument ok 11 71ca - Add valid connmark action and replace it ok 12 5f8f - Add valid connmark action with cookie ok 13 c506 - Replace connmark with invalid goto chain control ok 14 6571 - Delete connmark action with valid index ok 15 3426 - Delete connmark action with invalid index Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: act_nat: transition to percpu stats and rcuPedro Tammela1-3/+7
The tc action act_nat was using shared stats and taking the per action lock in the datapath. Improve it by using percpu stats and rcu. perf before: - 10.48% tcf_nat_act - 81.83% _raw_spin_lock 81.08% native_queued_spin_lock_slowpath perf after: - 0.48% tcf_nat_act tdc results: 1..27 ok 1 7565 - Add nat action on ingress with default control action ok 2 fd79 - Add nat action on ingress with pipe control action ok 3 eab9 - Add nat action on ingress with continue control action ok 4 c53a - Add nat action on ingress with reclassify control action ok 5 76c9 - Add nat action on ingress with jump control action ok 6 24c6 - Add nat action on ingress with drop control action ok 7 2120 - Add nat action on ingress with maximum index value ok 8 3e9d - Add nat action on ingress with invalid index value ok 9 f6c9 - Add nat action on ingress with invalid IP address ok 10 be25 - Add nat action on ingress with invalid argument ok 11 a7bd - Add nat action on ingress with DEFAULT IP address ok 12 ee1e - Add nat action on ingress with ANY IP address ok 13 1de8 - Add nat action on ingress with ALL IP address ok 14 8dba - Add nat action on egress with default control action ok 15 19a7 - Add nat action on egress with pipe control action ok 16 f1d9 - Add nat action on egress with continue control action ok 17 6d4a - Add nat action on egress with reclassify control action ok 18 b313 - Add nat action on egress with jump control action ok 19 d9fc - Add nat action on egress with drop control action ok 20 a895 - Add nat action on egress with DEFAULT IP address ok 21 2572 - Add nat action on egress with ANY IP address ok 22 37f3 - Add nat action on egress with ALL IP address ok 23 6054 - Add nat action on egress with cookie ok 24 79d6 - Add nat action on ingress with cookie ok 25 4b12 - Replace nat action with invalid goto chain control ok 26 b811 - Delete nat action with valid index ok 27 a521 - Delete nat action with invalid index Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: Retire rsvp classifierJamal Hadi Salim1-10/+0
The rsvp classifier has served us well for about a quarter of a century but has has not been getting much maintenance attention due to lack of known users. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: Retire tcindex classifierJamal Hadi Salim1-5/+0
The tcindex classifier has served us well for about a quarter of a century but has not been getting much TLC due to lack of known users. Most recently it has become easy prey to syzkaller. For this reason, we are retiring it. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-15wifi: cfg80211: remove gfp parameter from ↵Lorenzo Bianconi1-1/+0
cfg80211_obss_color_collision_notify description Get rid of gfp parameter from cfg80211_obss_color_collision_notify routine description. Fixes: 935ef47b16cc ("wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/2da652e2cd5c7903191091ae9757718f1be802a1.1676453359.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-15net: no longer support SOCK_REFCNT_DEBUG featureJason Xing1-28/+0
Commit e48c414ee61f ("[INET]: Generalise the TCP sock ID lookup routines") commented out the definition of SOCK_REFCNT_DEBUG in 2005 and later another commit 463c84b97f24 ("[NET]: Introduce inet_connection_sock") removed it. Since we could track all of them through bpf and kprobe related tools and the feature could print loads of information which might not be that helpful even under a little bit pressure, the whole feature which has been inactive for many years is no longer supported. Link: https://lore.kernel.org/lkml/20230211065153.54116-1-kerneljasonxing@gmail.com/ Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-14wifi: cfg80211: call reg_notifier for self managed wiphy from driver hintWen Gong1-0/+3
Currently the regulatory driver does not call the regulatory callback reg_notifier for self managed wiphys. Sometimes driver needs cfg80211 to calculate the info of ieee80211_channel such as flags and power, and driver needs to get the info of ieee80211_channel after hint of driver, but driver does not know when calculation of the info of ieee80211_channel become finished, so add notify to driver in reg_process_self_managed_hint() from cfg80211 is a good way, then driver could get the correct info in callback of reg_notifier. Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Link: https://lore.kernel.org/r/20230201065313.27203-1-quic_wgong@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notifyLorenzo Bianconi1-10/+6
Since cfg80211_bss_color_notify() is now always run in non-atomic context, get rid of gfp_t flags in the routine signature and always use GFP_KERNEL for netlink message allocation. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c687724e7b53556f7a2d9cbe3d11cdcf065cb687.1675255390.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: add a workaround for receiving non-standard mesh A-MSDUFelix Fietkau1-0/+13
At least ath10k and ath11k supported hardware (maybe more) does not implement mesh A-MSDU aggregation in a standard compliant way. 802.11-2020 9.3.2.2.2 declares that the Mesh Control field is part of the A-MSDU header (and little-endian). As such, its length must not be included in the subframe length field. Hardware affected by this bug treats the mesh control field as part of the MSDU data and sets the length accordingly. In order to avoid packet loss, keep track of which stations are affected by this and take it into account when converting A-MSDU to 802.3 + mesh control packets. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-5-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: fix receiving A-MSDU frames on mesh interfacesFelix Fietkau1-1/+26
The current mac80211 mesh A-MSDU receive path fails to parse A-MSDU packets on mesh interfaces, because it assumes that the Mesh Control field is always directly after the 802.11 header. 802.11-2020 9.3.2.2.2 Figure 9-70 shows that the Mesh Control field is actually part of the A-MSDU subframe header. This makes more sense, since it allows packets for multiple different destinations to be included in the same A-MSDU, as long as RA and TID are still the same. Another issue is the fact that the A-MSDU subframe length field was apparently accidentally defined as little-endian in the standard. In order to fix this, the mesh forwarding path needs happen at a different point in the receive path. ieee80211_data_to_8023_exthdr is changed to ignore the mesh control field and leave it in after the ethernet header. This also affects the source/dest MAC address fields, which now in the case of mesh point to the mesh SA/DA. ieee80211_amsdu_to_8023s is changed to deal with the endian difference and to add the Mesh Control length to the subframe length, since it's not covered by the MSDU length field. With these changes, the mac80211 will get the same packet structure for converted regular data packets and unpacked A-MSDU subframes. The mesh forwarding checks are now only performed after the A-MSDU decap. For locally received packets, the Mesh Control header is stripped away. For forwarded packets, a new 802.11 header gets added. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-4-nbd@nbd.name [fix fortify build error] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: configure puncturing bitmapAloka Dixit1-0/+3
- Configure the bitmap in link_conf and notify the driver. - Modify 'change' in ieee80211_start_ap() from u32 to u64 to support BSS_CHANGED_EHT_PUNCTURING. - Propagate the bitmap in channel switch events to userspace. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-5-quic_alokad@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: include puncturing bitmap in channel switch eventsAloka Dixit1-2/+4
Add puncturing bitmap in channel switch notifications and corresponding trace functions. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-4-quic_alokad@quicinc.com [fix qtnfmac] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: nl80211: validate and configure puncturing bitmapAloka Dixit1-0/+8
- New feature flag, NL80211_EXT_FEATURE_PUNCT, to advertise driver support for preamble puncturing in AP mode. - New attribute, NL80211_ATTR_PUNCT_BITMAP, to receive a puncturing bitmap from the userspace during AP bring up (NL80211_CMD_START_AP) and channel switch (NL80211_CMD_CHANNEL_SWITCH) operations. Each bit corresponds to a 20 MHz channel in the operating bandwidth, lowest bit for the lowest channel. Bit set to 1 indicates that the channel is punctured. Higher 16 bits are reserved. - New members added to structures cfg80211_ap_settings and cfg80211_csa_settings to propagate the bitmap to the driver after validation. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-3-quic_alokad@quicinc.com [move validation against 0xffff into policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: move puncturing bitmap validation from mac80211Aloka Dixit1-0/+12
- Move ieee80211_valid_disable_subchannel_bitmap() from mlme.c to chan.c, rename it as cfg80211_valid_disable_subchannel_bitmap() and export it. - Modify the prototype to include struct cfg80211_chan_def instead of only bandwidth to support a check which returns false if the primary channel is punctured. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-2-quic_alokad@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: mlme: handle EHT channel puncturingJohannes Berg1-1/+4
Handle the Puncturing info received from the AP in the EHT Operation element in beacons. If the info is invalid: - during association: disable EHT connection for the AP - after association: disconnect This commit includes many (internal) bugfixes and spec updates various people. Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/r/20230127123930.4fbc74582331.I3547481d49f958389f59dfeba3fcc75e72b0aa6e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: Extend cfg80211_update_owe_info_event() for MLD APVeerendranath Jakkam1-0/+10
Add support to offload OWE processing to user space for MLD AP when driver's SME in use. Add new parameters in struct cfg80211_update_owe_info to provide below information in cfg80211_update_owe_info_event() call: - MLO link ID of the AP, with which station requested (re)association. This is applicable for both MLO and non-MLO station connections when the AP affiliated with an MLD. - Station's MLD address if the connection is MLO capable. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230126143256.960563-3-quic_vjakkam@quicinc.com [reformat the trace event macro] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: Extend cfg80211_new_sta() for MLD APVeerendranath Jakkam1-0/+24
Add support for drivers to indicate STA connection(MLO/non-MLO) when user space SME (e.g., hostapd) is not used for MLD AP. Add new parameters in struct station_info to provide below information in cfg80211_new_sta() call: - MLO link ID of the AP, with which station completed (re)association. This is applicable for both MLO and non-MLO station connections when the AP affiliated with an MLD. - Station's MLD address if the connection is MLO capable. - (Re)Association Response IEs sent to the station. User space needs this to determine rejected and accepted affiliated links information of the connected station if the connection is MLO capable. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230126143256.960563-2-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: Authentication offload to user space for MLO connection in ↵Veerendranath Jakkam1-0/+12
STA mode Currently authentication request event interface doesn't have support to indicate the user space whether it should enable MLO or not during the authentication with the specified AP. But driver needs such capability since the connection is MLO or not decided by the driver in case of SME offload to the driver. Add support for driver to indicate MLD address of the AP in authentication offload request to inform user space to enable MLO during authentication process. Driver shall look at NL80211_ATTR_MLO_SUPPORT flag capability in NL80211_CMD_CONNECT to know whether the user space supports enabling MLO during the authentication offload. User space should enable MLO during the authentication only when it receives the AP MLD address in authentication offload request. User space shouldn't enable MLO if the authentication offload request doesn't indicate the AP MLD address even if the AP is MLO capable. When MLO is enabled, user space should use the MAC address of the interface (on which driver sent request) as self MLD address. User space and driver to use MLD addresses in RA, TA and BSSID fields of the frames between them, and driver translates the MLD addresses to/from link addresses based on the link chosen for the authentication. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230116125058.1604843-1-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14net/sched: support per action hw statsOz Shlomo2-10/+20
There are currently two mechanisms for populating hardware stats: 1. Using flow_offload api to query the flow's statistics. The api assumes that the same stats values apply to all the flow's actions. This assumption breaks when action drops or jumps over following actions. 2. Using hw_action api to query specific action stats via a driver callback method. This api assures the correct action stats for the offloaded action, however, it does not apply to the rest of the actions in the flow's actions array. Extend the flow_offload stats callback to indicate that a per action stats update is required. Use the existing flow_offload_action api to query the action's hw stats. In addition, currently the tc action stats utility only updates hw actions. Reuse the existing action stats cb infrastructure to query any action stats. Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14net/sched: introduce flow_offload action cookieOz Shlomo1-0/+2
Currently a hardware action is uniquely identified by the <id, hw_index> tuple. However, the id is set by the flow_act_setup callback and tc core cannot enforce this, and it is possible that a future change could break this. In addition, <id, hw_index> are not unique across network namespaces. Uniquely identify the action by setting an action cookie by the tc core. Use the unique action cookie to query the action's hardware stats. Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14net/sched: pass flow_stats instead of multiple stats argsOz Shlomo1-6/+5
Instead of passing 6 stats related args, pass the flow_stats. Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-13ipv6: icmp6: add drop reason support to ndisc_rcv()Eric Dumazet2-1/+10
Creates three new drop reasons: SKB_DROP_REASON_IPV6_NDISC_FRAG: invalid frag (suppress_frag_ndisc). SKB_DROP_REASON_IPV6_NDISC_HOP_LIMIT: invalid hop limit. SKB_DROP_REASON_IPV6_NDISC_BAD_CODE: invalid NDISC icmp6 code. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-13ipv6: icmp6: add drop reason support to icmpv6_notify()Eric Dumazet1-1/+2
Accurately reports what happened in icmpv6_notify() when handling a packet. This makes use of the new IPV6_BAD_EXTHDR drop reason. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-13net: dropreason: add SKB_DROP_REASON_IPV6_BAD_EXTHDREric Dumazet1-0/+3
This drop reason can be used whenever an IPv6 packet has a malformed extension header. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-13devlink: fix the name of value arg of devl_param_driverinit_value_get()Jiri Pirko1-1/+1
Probably due to copy-paste error, the name of the arg is "init_val" which is misleading, as the pointer is used to point to struct where to store the current value. Rename it to "val" and change the arg comment a bit on the way. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13devlink: make sure driver does not read updated driverinit param before reloadJiri Pirko1-0/+4
The driverinit param purpose is to serve the driver during init/reload time to provide a value, either default or set by user. Make sure that driver does not read value updated by user before the reload is performed. Hold the new value in a separate struct and switch it during reload. Note that this is required to be eventually possible to call devl_param_driverinit_value_get() without holding instance lock. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-10dccp/tcp: Avoid negative sk_forward_alloc by ipv6_pinfo.pktoptions.Kuniyuki Iwashima1-0/+13
Eric Dumazet pointed out [0] that when we call skb_set_owner_r() for ipv6_pinfo.pktoptions, sk_rmem_schedule() has not been called, resulting in a negative sk_forward_alloc. We add a new helper which clones a skb and sets its owner only when sk_rmem_schedule() succeeds. Note that we move skb_set_owner_r() forward in (dccp|tcp)_v6_do_rcv() because tcp_send_synack() can make sk_forward_alloc negative before ipv6_opt_accepted() in the crossed SYN-ACK or self-connect() cases. [0]: https://lore.kernel.org/netdev/CANn89iK9oc20Jdi_41jb9URdF210r7d1Y-+uypbMSbOfY6jqrg@mail.gmail.com/ Fixes: 323fbd0edf3f ("net: dccp: Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv()") Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-10Merge tag 'for-net-next-2023-02-09' of ↵Jakub Kicinski2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== pull-request: bluetooth-next - Add new PID/VID 0489:e0f2 for MT7921 - Add VID:PID 13d3:3529 for Realtek RTL8821CE - Add CIS feature bits to controller information - Set Per Platform Antenna Gain(PPAG) for Intel controllers * tag 'for-net-next-2023-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG) Bluetooth: Make sure LE create conn cancel is sent when timeout Bluetooth: Free potentially unfreed SCO connection Bluetooth: hci_qca: get wakeup status from serdev device handle Bluetooth: L2CAP: Fix potential user-after-free Bluetooth: MGMT: add CIS feature bits to controller information Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds Bluetooth: HCI: Replace zero-length arrays with flexible-array members Bluetooth: qca: Fix sparse warnings Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921 Bluetooth: Fix issue with Actions Semi ATS2851 based devices ==================== Link: https://lore.kernel.org/r/20230209234922.3756173-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-10Daniel Borkmann says:Jakub Kicinski1-0/+15
==================== pull-request: bpf-next 2023-02-11 We've added 96 non-merge commits during the last 14 day(s) which contain a total of 152 files changed, 4884 insertions(+), 962 deletions(-). There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c between commit 5b246e533d01 ("ice: split probe into smaller functions") from the net-next tree and commit 66c0e13ad236 ("drivers: net: turn on XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev() is otherwise there a 2nd time, and add XDP features to the existing ice_cfg_netdev() one: [...] ice_set_netdev_features(netdev); netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT | NETDEV_XDP_ACT_XSK_ZEROCOPY; ice_set_ops(netdev); [...] Stephen's merge conflict mail: https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/ The main changes are: 1) Add support for BPF trampoline on s390x which finally allows to remove many test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich. 2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski. 3) Add capability to export the XDP features supported by the NIC. Along with that, add a XDP compliance test tool, from Lorenzo Bianconi & Marek Majtyka. 4) Add __bpf_kfunc tag for marking kernel functions as kfuncs, from David Vernet. 5) Add a deep dive documentation about the verifier's register liveness tracking algorithm, from Eduard Zingerman. 6) Fix and follow-up cleanups for resolve_btfids to be compiled as a host program to avoid cross compile issues, from Jiri Olsa & Ian Rogers. 7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted when testing on different NICs, from Jesper Dangaard Brouer. 8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang. 9) Extend libbpf to add an option for when the perf buffer should wake up, from Jon Doron. 10) Follow-up fix on xdp_metadata selftest to just consume on TX completion, from Stanislav Fomichev. 11) Extend the kfuncs.rst document with description on kfunc lifecycle & stability expectations, from David Vernet. 12) Fix bpftool prog profile to skip attaching to offline CPUs, from Tonghao Zhang. ==================== Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-10net: extract nf_ct_handle_fragments to nf_conntrack_ovsXin Long1-0/+2
Now handle_fragments() in OVS and TC have the similar code, and this patch removes the duplicate code by moving the function to nf_conntrack_ovs. Note that skb_clear_hash(skb) or skb->ignore_df = 1 should be done only when defrag returns 0, as it does in other places in kernel. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Aaron Conole <aconole@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-10net: extract nf_ct_skb_network_trim function to nf_conntrack_ovsXin Long1-0/+2
There are almost the same code in ovs_skb_network_trim() and tcf_ct_skb_network_trim(), this patch extracts them into a function nf_ct_skb_network_trim() and moves the function to nf_conntrack_ovs. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Aaron Conole <aconole@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-09Bluetooth: MGMT: add CIS feature bits to controller informationPauli Virtanen1-0/+2
Userspace needs to know whether the adapter has feature support for Connected Isochronous Stream - Central/Peripheral, so it can set up LE Audio features accordingly. Expose these feature bits as settings in MGMT controller info. Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09Bluetooth: HCI: Replace zero-length arrays with flexible-array membersGustavo A. R. Silva1-2/+2
Zero-length arrays are deprecated[1] and we are moving towards adopting C99 flexible-array members instead. So, replace zero-length arrays in a couple of structures with flex-array members. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [2]. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays [1] Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [2] Link: https://github.com/KSPP/linux/issues/78 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-08net/sched: taprio: give higher priority to higher TCs in software dequeue modeVladimir Oltean1-0/+5
Current taprio software implementation is haunted by the shadow of the igb/igc hardware model. It iterates over child qdiscs in increasing order of TXQ index, therefore giving higher xmit priority to TXQ 0 and lower to TXQ N. According to discussions with Vinicius, that is the default (perhaps even unchangeable) prioritization scheme used for the NICs that taprio was first written for (igb, igc), and we have a case of two bugs canceling out, resulting in a functional setup on igb/igc, but a less sane one on other NICs. To the best of my understanding, taprio should prioritize based on the traffic class, so it should really dequeue starting with the highest traffic class and going down from there. We get to the TXQ using the tc_to_txq[] netdev property. TXQs within the same TC have the same (strict) priority, so we should pick from them as fairly as we can. We can achieve that by implementing something very similar to q->curband from multiq_dequeue(). Since igb/igc really do have TXQ 0 of higher hardware priority than TXQ 1 etc, we need to preserve the behavior for them as well. We really have no choice, because in txtime-assist mode, taprio is essentially a software scheduler towards offloaded child tc-etf qdiscs, so the TXQ selection really does matter (not all igb TXQs support ETF/SO_TXTIME, says Kurt Kanzenbach). To preserve the behavior, we need a capability bit so that taprio can determine if it's running on igb/igc, or on something else. Because igb doesn't offload taprio at all, we can't piggyback on the qdisc_offload_query_caps() call from taprio_enable_offload(), but instead we need a separate call which is also made for software scheduling. Introduce two static keys to minimize the performance penalty on systems which only have igb/igc NICs, and on systems which only have other NICs. For mixed systems, taprio will have to dynamically check whether to dequeue using one prioritization algorithm or using the other. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-06net: add sock_init_data_uid()Pietro Borrello1-1/+6
Add sock_init_data_uid() to explicitly initialize the socket uid. To initialise the socket uid, sock_init_data() assumes a the struct socket* sock is always embedded in a struct socket_alloc, used to access the corresponding inode uid. This may not be true. Examples are sockets created in tun_chr_open() and tap_open(). Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-06net/sched: taprio: only pass gate mask per TXQ for igc, stmmac, tsnep, am65_cpswVladimir Oltean1-0/+1
There are 2 classes of in-tree drivers currently: - those who act upon struct tc_taprio_sched_entry :: gate_mask as if it holds a bit mask of TXQs - those who act upon the gate_mask as if it holds a bit mask of TCs When it comes to the standard, IEEE 802.1Q-2018 does say this in the second paragraph of section 8.6.8.4 Enhancements for scheduled traffic: | A gate control list associated with each Port contains an ordered list | of gate operations. Each gate operation changes the transmission gate | state for the gate associated with each of the Port's traffic class | queues and allows associated control operations to be scheduled. In typically obtuse language, it refers to a "traffic class queue" rather than a "traffic class" or a "queue". But careful reading of 802.1Q clarifies that "traffic class" and "queue" are in fact synonymous (see 8.6.6 Queuing frames): | A queue in this context is not necessarily a single FIFO data structure. | A queue is a record of all frames of a given traffic class awaiting | transmission on a given Bridge Port. The structure of this record is not | specified. i.o.w. their definition of "queue" isn't the Linux TX queue. The gate_mask really is input into taprio via its UAPI as a mask of traffic classes, but taprio_sched_to_offload() converts it into a TXQ mask. The breakdown of drivers which handle TC_SETUP_QDISC_TAPRIO is: - hellcreek, felix, sja1105: these are DSA switches, it's not even very clear what TXQs correspond to, other than purely software constructs. Only the mqprio configuration with 8 TCs and 1 TXQ per TC makes sense. So it's fine to convert these to a gate mask per TC. - enetc: I have the hardware and can confirm that the gate mask is per TC, and affects all TXQs (BD rings) configured for that priority. - igc: in igc_save_qbv_schedule(), the gate_mask is clearly interpreted to be per-TXQ. - tsnep: Gerhard Engleder clarifies that even though this hardware supports at most 1 TXQ per TC, the TXQ indices may be different from the TC values themselves, and it is the TXQ indices that matter to this hardware. So keep it per-TXQ as well. - stmmac: I have a GMAC datasheet, and in the EST section it does specify that the gate events are per TXQ rather than per TC. - lan966x: again, this is a switch, and while not a DSA one, the way in which it implements lan966x_mqprio_add() - by only allowing num_tc == NUM_PRIO_QUEUES (8) - makes it clear to me that TXQs are a purely software construct here as well. They seem to map 1:1 with TCs. - am65_cpsw: from looking at am65_cpsw_est_set_sched_cmds(), I get the impression that the fetch_allow variable is treated like a prio_mask. This definitely sounds closer to a per-TC gate mask rather than a per-TXQ one, and TI documentation does seem to recomment an identity mapping between TCs and TXQs. However, Roger Quadros would like to do some testing before making changes, so I'm leaving this driver to operate as it did before, for now. Link with more details at the end. Based on this breakdown, we have 5 drivers with a gate mask per TC and 4 with a gate mask per TXQ. So let's make the gate mask per TXQ the opt-in and the gate mask per TC the default. Benefit from the TC_QUERY_CAPS feature that Jakub suggested we add, and query the device driver before calling the proper ndo_setup_tc(), and figure out if it expects one or the other format. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230202003621.2679603-15-vladimir.oltean@nxp.com/#25193204 Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: Siddharth Vadapalli <s-vadapalli@ti.com> Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-10 14:39:55 +0000