summaryrefslogtreecommitdiff
path: root/include/net/bonding.h
AgeCommit message (Collapse)AuthorFilesLines
2023-08-24bonding: fix macvlan over alb bond supportHangbin Liu1-10/+1
The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds") aims to enable the use of macvlans on top of rlb bond mode. However, the current rlb bond mode only handles ARP packets to update remote neighbor entries. This causes an issue when a macvlan is on top of the bond, and remote devices send packets to the macvlan using the bond's MAC address as the destination. After delivering the packets to the macvlan, the macvlan will rejects them as the MAC address is incorrect. Consequently, this commit makes macvlan over bond non-functional. To address this problem, one potential solution is to check for the presence of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev) and return NULL in the rlb_arp_xmit() function. However, this approach doesn't fully resolve the situation when a VLAN exists between the bond and macvlan. So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit(). As the comment said, Don't modify or load balance ARPs that do not originate locally. Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds") Reported-by: susan.zheng@veritas.com Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-14net: bonding: remove kernel-doc comment markerRandy Dunlap1-1/+1
Change an errant kernel-doc comment marker (/**) to a regular comment to prevent a kernel-doc warning. bonding.h:282: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Returns NULL if the net_device does not belong to any of the bond's slaves Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Link: https://lore.kernel.org/r/20230714045127.18752-2-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Cross-merge networking fixes after downstream PR. Conflicts: net/ipv4/raw.c 3632679d9e4f ("ipv{4,6}/raw: fix output xfrm lookup wrt protocol") c85be08fc4fa ("raw: Stop using RTO_ONLINK.") https://lore.kernel.org/all/20230525110037.2b532b83@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/freescale/fec_main.c 9025944fddfe ("net: fec: add dma_wmb to ensure correct descriptor values") 144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-19net: fix stack overflow when LRO is disabled for virtual interfacesTaehee Yoo1-0/+1
When the virtual interface's feature is updated, it synchronizes the updated feature for its own lower interface. This propagation logic should be worked as the iteration, not recursively. But it works recursively due to the netdev notification unexpectedly. This problem occurs when it disables LRO only for the team and bonding interface type. team0 | +------+------+-----+-----+ | | | | | team1 team2 team3 ... team200 If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE event to its own lower interfaces(team1 ~ team200). It is worked by netdev_sync_lower_features(). So, the NETDEV_FEAT_CHANGE notification logic of each lower interface work iteratively. But generated NETDEV_FEAT_CHANGE event is also sent to the upper interface too. upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own lower interfaces again. lower and upper interfaces receive this event and generate this event again and again. So, the stack overflow occurs. But it is not the infinite loop issue. Because the netdev_sync_lower_features() updates features before generating the NETDEV_FEAT_CHANGE event. Already synchronized lower interfaces skip notification logic. So, it is just the problem that iteration logic is changed to the recursive unexpectedly due to the notification mechanism. Reproducer: ip link add team0 type team ethtool -K team0 lro on for i in {1..200} do ip link add team$i master team0 type team ethtool -K team$i lro on done ethtool -K team0 lro off In order to fix it, the notifier_ctx member of bonding/team is introduced. Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-16net: bonding: Add SPDX identifier to remaining filesBagas Sanjaya1-3/+1
Previous batches of SPDX conversion missed bond_main.c and bonding_priv.h because these files doesn't mention intended GPL version. Add SPDX identifier to these files, assuming GPL 1.0+. Cc: Thomas Davis <tadavis@lbl.gov> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-10bonding: fix send_peer_notif overflowHangbin Liu1-1/+1
Bonding send_peer_notif was defined as u8. Since commit 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications"). the bond->send_peer_notif will be num_peer_notif multiplied by peer_notif_delay, which is u8 * u32. This would cause the send_peer_notif overflow easily. e.g. ip link add bond0 type bond mode 1 miimon 100 num_grat_arp 30 peer_notify_delay 1000 To fix the overflow, let's set the send_peer_notif to u32 and limit peer_notif_delay to 300s. Reported-by: Liang Li <liali@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2090053 Fixes: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-05bonding: add xdp_features supportLorenzo Bianconi1-0/+1
Introduce xdp_features support for bonding driver according to the slave devices attached to the master one. xdp_features is required whenever we want to xdp_redirect traffic into a bond device and then into selected slaves attached to it. Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jussi Maki <joamaki@gmail.com> Tested-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-07bonding: fix ns validation on backup slavesHangbin Liu1-2/+6
When arp_validate is set to 2, 3, or 6, validation is performed for backup slaves as well. As stated in the bond documentation, validation involves checking the broadcast ARP request sent out via the active slave. This helps determine which slaves are more likely to function in the event of an active slave failure. However, when the target is an IPv6 address, the NS message sent from the active interface is not checked on backup slaves. Additionally, based on the bond_arp_rcv() rule b, we must reverse the saddr and daddr when checking the NS message. Note that when checking the NS message, the destination address is a multicast address. Therefore, we must convert the target address to solicited multicast in the bond_get_targets_ip6() function. Prior to the fix, the backup slaves had a mii status of "down", but after the fix, all of the slaves' mii status was updated to "UP". Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-27bond: Disable TLS features indicationTariq Toukan1-4/+0
Bond agnostically interacts with TLS device-offload requests via the .ndo_sk_get_lower_dev operation. Return value is true iff bond guarantees fixed mapping between the TLS connection and a lower netdev. Due to this nature, the bond TLS device offload features are not explicitly controllable in the bond layer. As of today, these are read-only values based on the evaluation of bond_sk_check(). However, this indication might be incorrect and misleading, when the feature bits are "fixed" by some dependency features. For example, NETIF_F_HW_TLS_TX/RX are forcefully cleared in case the corresponding checksum offload is disabled. But in fact the bond ability to still offload TLS connections to the lower device is not hurt. This means that these bits can not be trusted, and hence better become unused. This patch revives some old discussion [1] and proposes a much simpler solution: Clear the bond's TLS features bits. Everyone should stop reading them. [1] https://lore.kernel.org/netdev/20210526095747.22446-1-tariqt@nvidia.com/ Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20221025105300.4718-1-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-16net: bonding: Share lacpdu_mcast_addr definitionBenjamin Poirier1-0/+3
There are already a few definitions of arrays containing MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all contain the same constant data so define one common instance for all bonding code. Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-03net: bonding: replace dev_trans_start() with the jiffies of the last ARP/NSVladimir Oltean1-1/+12
The bonding driver piggybacks on time stamps kept by the network stack for the purpose of the netdev TX watchdog, and this is problematic because it does not work with NETIF_F_LLTX devices. It is hard to say why the driver looks at dev_trans_start() of the slave->dev, considering that this is updated even by non-ARP/NS probes sent by us, and even by traffic not sent by us at all (for example PTP on physical slave devices). ARP monitoring in active-backup mode appears to still work even if we track only the last TX time of actual ARP probes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-24Bonding: add per-port priority for failover re-selectionHangbin Liu1-0/+1
Add per port priority support for bonding active slave re-selection during failover. A higher number means higher priority in selection. The primary slave still has the highest priority. This option also follows the primary_reselect rules. This option could only be configured via netlink. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-01bonding: guard ns_targets by CONFIG_IPV6Hangbin Liu1-0/+6
Guard ns_targets in struct bond_params by CONFIG_IPV6, which could save 256 bytes if IPv6 not configed. Also add this protection for function bond_is_ip6_target_ok() and bond_get_targets_ip6(). Remove the IS_ENABLED() check for bond_opts[] as this will make BOND_OPT_NS_TARGETS uninitialized if CONFIG_IPV6 not enabled. Add a dummy bond_option_ns_ip6_targets_set() for this situation. Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Link: https://lore.kernel.org/r/20220531063727.224043-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-11net: add per-cpu storage and net->core_statsEric Dumazet1-1/+1
Before adding yet another possibly contended atomic_long_t, it is time to add per-cpu storage for existing ones: dev->tx_dropped, dev->rx_dropped, and dev->rx_nohandler Because many devices do not have to increment such counters, allocate the per-cpu storage on demand, so that dev_get_stats() does not have to spend considerable time folding zero counters. Note that some drivers have abused these counters which were supposed to be only used by core networking stack. v4: should use per_cpu_ptr() in dev_get_stats() (Jakub) v3: added a READ_ONCE() in netdev_core_stats_alloc() (Paolo) v2: add a missing include (reported by kernel test robot <lkp@intel.com>) Change in netdev_core_stats_alloc() (Jakub) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: jeffreyji <jeffreyji@google.com> Reviewed-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220311051420.2608812-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-21bonding: add new option ns_ip6_targetHangbin Liu1-0/+7
This patch add a new bonding option ns_ip6_target, which correspond to the arp_ip_target. With this we set IPv6 targets and send IPv6 NS request to determine the health of the link. For other related options like the validation, we still use arp_validate, and will change to ns_validate later. Note: the sysfs configuration support was removed based on https://lore.kernel.org/netdev/8863.1645071997@famine Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21bonding: add new parameter ns_targetsHangbin Liu1-1/+18
Add a new bonding parameter ns_targets to store IPv6 address. Add required bond_ns_send/rcv functions first before adding IPv6 address option setting. Add two functions bond_send/rcv_validate so we can send/recv ARP and NS at the same time. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net: remove bond_slave_has_mac_rcu()Jakub Kicinski1-14/+0
No caller since v3.16. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-24bonding: use rcu_dereference_rtnl when get bonding active slaveHangbin Liu1-1/+1
bond_option_active_slave_get_rcu() should not be used in rtnl_mutex as it use rcu_dereference(). Replace to rcu_dereference_rtnl() so we also can use this function in rtnl protected context. With this update, we can rmeove the rcu_read_lock/unlock in bonding .ndo_eth_ioctl and .get_ts_info. Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com> Fixes: 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-30Bonding: add arp_missed_max optionHangbin Liu1-0/+1
Currently, we use hard code number to verify if we are in the arp_interval timeslice. But some user may want to reduce/extend the verify timeslice. With the similar team option 'missed_max' the uers could change that number based on their own environment. Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-11bonding: remove extraneous definitions from bonding.hJonathan Toppins1-12/+0
All of the symbols either only exist in bond_options.c or nowhere at all. These symbols were verified to not exist in the code base by using `git grep` and their removal was verified by compiling bonding.ko. Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-10Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-0/+1
Daniel Borkmann says: ==================== bpf-next 2021-08-10 We've added 31 non-merge commits during the last 8 day(s) which contain a total of 28 files changed, 3644 insertions(+), 519 deletions(-). 1) Native XDP support for bonding driver & related BPF selftests, from Jussi Maki. 2) Large batch of new BPF JIT tests for test_bpf.ko that came out as a result from 32-bit MIPS JIT development, from Johan Almbladh. 3) Rewrite of netcnt BPF selftest and merge into test_progs, from Stanislav Fomichev. 4) Fix XDP bpf_prog_test_run infra after net to net-next merge, from Andrii Nakryiko. 5) Follow-up fix in unix_bpf_update_proto() to enforce socket type, from Cong Wang. 6) Fix bpf-iter-tcp4 selftest to print the correct dest IP, from Jose Blanquicet. 7) Various misc BPF XDP sample improvements, from Niklas Söderlund, Matthew Cover, and Muhammad Falak R Wani. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits) bpf, tests: Add tail call test suite bpf, tests: Add tests for BPF_CMPXCHG bpf, tests: Add tests for atomic operations bpf, tests: Add test for 32-bit context pointer argument passing bpf, tests: Add branch conversion JIT test bpf, tests: Add word-order tests for load/store of double words bpf, tests: Add tests for ALU operations implemented with function calls bpf, tests: Add more ALU64 BPF_MUL tests bpf, tests: Add more BPF_LSH/RSH/ARSH tests for ALU64 bpf, tests: Add more ALU32 tests for BPF_LSH/RSH/ARSH bpf, tests: Add more tests of ALU32 and ALU64 bitwise operations bpf, tests: Fix typos in test case descriptions bpf, tests: Add BPF_MOV tests for zero and sign extension bpf, tests: Add BPF_JMP32 test cases samples, bpf: Add an explict comment to handle nested vlan tagging. selftests/bpf: Add tests for XDP bonding selftests/bpf: Fix xdp_tx.c prog section name net, core: Allow netdev_lower_get_next_private_rcu in bh context bpf, devmap: Exclude XDP broadcast to master device net, bonding: Add XDP support to the bonding driver ... ==================== Link: https://lore.kernel.org/r/20210810130038.16927-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-09net, bonding: Add XDP support to the bonding driverJussi Maki1-0/+1
XDP is implemented in the bonding driver by transparently delegating the XDP program loading, removal and xmit operations to the bonding slave devices. The overall goal of this work is that XDP programs can be attached to a bond device *without* any further changes (or awareness) necessary to the program itself, meaning the same XDP program can be attached to a native device but also a bonding device. Semantics of XDP_TX when attached to a bond are equivalent in such setting to the case when a tc/BPF program would be attached to the bond, meaning transmitting the packet out of the bond itself using one of the bond's configured xmit methods to select a slave device (rather than XDP_TX on the slave itself). Handling of XDP_TX to transmit using the configured bonding mechanism is therefore implemented by rewriting the BPF program return value in bpf_prog_run_xdp. To avoid performance impact this check is guarded by a static key, which is incremented when a XDP program is loaded onto a bond device. This approach was chosen to avoid changes to drivers implementing XDP. If the slave device does not match the receive device, then XDP_REDIRECT is transparently used to perform the redirection in order to have the network driver release the packet from its RX ring. The bonding driver hashing functions have been refactored to allow reuse with xdp_buff's to avoid code duplication. The motivation for this change is to enable use of bonding (and 802.3ad) in hairpinning L4 load-balancers such as [1] implemented with XDP and also to transparently support bond devices for projects that use XDP given most modern NICs have dual port adapters. An alternative to this approach would be to implement 802.3ad in user-space and implement the bonding load-balancing in the XDP program itself, but is rather a cumbersome endeavor in terms of slave device management (e.g. by watching netlink) and requires separate programs for native vs bond cases for the orchestrator. A native in-kernel implementation overcomes these issues and provides more flexibility. Below are benchmark results done on two machines with 100Gbit Intel E810 (ice) NIC and with 32-core 3970X on sending machine, and 16-core 3950X on receiving machine. 64 byte packets were sent with pktgen-dpdk at full rate. Two issues [2, 3] were identified with the ice driver, so the tests were performed with iommu=off and patch [2] applied. Additionally the bonding round robin algorithm was modified to use per-cpu tx counters as high CPU load (50% vs 10%) and high rate of cache misses were caused by the shared rr_tx_counter (see patch 2/3). The statistics were collected using "sar -n dev -u 1 10". On top of that, for ice, further work is in progress on improving the XDP_TX numbers [4]. -----------------------| CPU |--| rxpck/s |--| txpck/s |---- without patch (1 dev): XDP_DROP: 3.15% 48.6Mpps XDP_TX: 3.12% 18.3Mpps 18.3Mpps XDP_DROP (RSS): 9.47% 116.5Mpps XDP_TX (RSS): 9.67% 25.3Mpps 24.2Mpps ----------------------- with patch, bond (1 dev): XDP_DROP: 3.14% 46.7Mpps XDP_TX: 3.15% 13.9Mpps 13.9Mpps XDP_DROP (RSS): 10.33% 117.2Mpps XDP_TX (RSS): 10.64% 25.1Mpps 24.0Mpps ----------------------- with patch, bond (2 devs): XDP_DROP: 6.27% 92.7Mpps XDP_TX: 6.26% 17.6Mpps 17.5Mpps XDP_DROP (RSS): 11.38% 117.2Mpps XDP_TX (RSS): 14.30% 28.7Mpps 27.4Mpps -------------------------------------------------------------- RSS: Receive Side Scaling, e.g. the packets were sent to a range of destination IPs. [1]: https://cilium.io/blog/2021/05/20/cilium-110#standalonelb [2]: https://lore.kernel.org/bpf/20210601113236.42651-1-maciej.fijalkowski@intel.com/T/#t [3]: https://lore.kernel.org/bpf/CAHn8xckNXci+X_Eb2WMv4uVYjO2331UWB2JLtXr_58z0Av8+8A@mail.gmail.com/ [4]: https://lore.kernel.org/bpf/20210805230046.28715-1-maciej.fijalkowski@intel.com/T/#t Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20210731055738.16820-4-joamaki@gmail.com
2021-08-03bonding: add new option lacp_activeHangbin Liu1-0/+1
Add an option lacp_active, which is similar with team's runner.active. This option specifies whether to send LACPDU frames periodically. If set on, the LACPDU frames are sent along with the configured lacp_rate setting. If set off, the LACPDU frames acts as "speak when spoken to". Note, the LACPDU state frames still will be sent when init or unbind port. v2: remove module parameter Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-06bonding: Add struct bond_ipesc to manage SATaehee Yoo1-1/+8
bonding has been supporting ipsec offload. When SA is added, bonding just passes SA to its own active real interface. But it doesn't manage SA. So, when events(add/del real interface, active real interface change, etc) occur, bonding can't handle that well because It doesn't manage SA. So some problems(panic, UAF, refcnt leak)occur. In order to make it stable, it should manage SA. That's the reason why struct bond_ipsec is added. When a new SA is added to bonding interface, it is stored in the bond_ipsec list. And the SA is passed to a current active real interface. If events occur, it uses bond_ipsec data to handle these events. bond->ipsec_list is protected by bond->ipsec_lock. If a current active real interface is changed, the following logic works. 1. delete all SAs from old active real interface 2. Add all SAs to the new active real interface. 3. If a new active real interface doesn't support ipsec offload or SA's option, it sets real_dev to NULL. Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: bonding: Use per-cpu rr_tx_counterJussi Maki1-1/+1
The round-robin rr_tx_counter was shared across CPUs leading to significant cache thrashing at high packet rates. This patch switches the round-robin packet counter to use a per-cpu variable to decide the destination slave. On a test with 2x100Gbit ICE nic with pktgen_sample_04_many_flows.sh (-s 64 -t 32) the tx rate was 19.6Mpps before and 22.3Mpps after this patch. "perf top -e cache_misses" before: 12.31% [bonding] [k] bond_xmit_roundrobin_slave_get 10.59% [sch_fq_codel] [k] fq_codel_dequeue 9.34% [kernel] [k] skb_release_data after: 15.42% [sch_fq_codel] [k] fq_codel_dequeue 10.06% [kernel] [k] __memset 9.12% [kernel] [k] skb_release_data Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-18net/bonding: Declare TLS RX device offload supportTariq Toukan1-1/+1
Following the description in previous patch (for TX): As the bond interface is being bypassed by the TLS module, interacting directly against the lower devs, there is no way for the bond interface to disable its device offload capabilities, as long as the mode/policy config allows it. Hence, the feature flag is not directly controllable, but just reflects the offload status based on the logic under bond_sk_check(). Here we just declare RX device offload support, and expose it via the NETIF_F_HW_TLS_RX flag. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18net/bonding: Implement TLS TX device offloadTariq Toukan1-0/+2
Implement TLS TX device offload for bonding interfaces. This allows kTLS sockets running on a bond to benefit from the device offload on capable lower devices. To allow a simple and fast maintenance of the TLS context in SW and lower devices, we bind the TLS socket to a specific lower dev. To achieve a behavior similar to SW kTLS, we support only balance-xor and 802.3ad modes, with xmit_hash_policy=layer3+4. This is enforced in bond_sk_check(), done in a previous patch. For the above configuration, the SW implementation keeps picking the same exact lower dev for all the socket's SKBs. The device offload behaves similarly, making the decision once at the connection creation. Per socket, the TLS module should work directly with the lowest netdev in chain, to call the tls_dev_ops operations. As the bond interface is being bypassed by the TLS module, interacting directly against the lower devs, there is no way for the bond interface to disable its device offload capabilities, as long as the mode/policy config allows it. Hence, the feature flag is not directly controllable, but just reflects the current offload status based on the logic under bond_sk_check(). Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18net/bonding: Implement ndo_sk_get_lower_devTariq Toukan1-0/+2
Add ndo_sk_get_lower_dev() implementation for bond interfaces. Support only for the cases where the socket's and SKBs' hash yields identical value for the whole connection lifetime. Here we restrict it to L3+4 sockets only, with xmit_hash_policy==LAYER34 and bond modes xor/802.3ad. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-08bonding: fix feature flag setting at init timeJarod Wilson1-2/+0
Don't try to adjust XFRM support flags if the bond device isn't yet registered. Bad things can currently happen when netdev_change_features() is called without having wanted_features fully filled in yet. This code runs both on post-module-load mode changes, as well as at module init time, and when run at module init time, it is before register_netdevice() has been called and filled in wanted_features. The empty wanted_features led to features also getting emptied out, which was definitely not the intended behavior, so prevent that from happening. Originally, I'd hoped to stop adjusting wanted_features at all in the bonding driver, as it's documented as being something only the network core should touch, but we actually do need to do this to properly update both the features and wanted_features fields when changing the bond type, or we get to a situation where ethtool sees: esp-hw-offload: off [requested on] I do think we should be using netdev_update_features instead of netdev_change_features here though, so we only send notifiers when the features actually changed. Fixes: a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load") Reported-by: Ivan Vecera <ivecera@redhat.com> Suggested-by: Ivan Vecera <ivecera@redhat.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Link: https://lore.kernel.org/r/20201205172229.576587-1-jarod@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21bonding: wait for sysfs kobject destruction before freeing struct slaveJamie Iles1-0/+8
syzkaller found that with CONFIG_DEBUG_KOBJECT_RELEASE=y, releasing a struct slave device could result in the following splat: kobject: 'bonding_slave' (00000000cecdd4fe): kobject_release, parent 0000000074ceb2b2 (delayed 1000) bond0 (unregistering): (slave bond_slave_1): Releasing backup interface ------------[ cut here ]------------ ODEBUG: free active (active state 0) object type: timer_list hint: workqueue_select_cpu_near kernel/workqueue.c:1549 [inline] ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x98 kernel/workqueue.c:1600 WARNING: CPU: 1 PID: 842 at lib/debugobjects.c:485 debug_print_object+0x180/0x240 lib/debugobjects.c:485 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 842 Comm: kworker/u4:4 Tainted: G S 5.9.0-rc8+ #96 Hardware name: linux,dummy-virt (DT) Workqueue: netns cleanup_net Call trace: dump_backtrace+0x0/0x4d8 include/linux/bitmap.h:239 show_stack+0x34/0x48 arch/arm64/kernel/traps.c:142 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x174/0x1f8 lib/dump_stack.c:118 panic+0x360/0x7a0 kernel/panic.c:231 __warn+0x244/0x2ec kernel/panic.c:600 report_bug+0x240/0x398 lib/bug.c:198 bug_handler+0x50/0xc0 arch/arm64/kernel/traps.c:974 call_break_hook+0x160/0x1d8 arch/arm64/kernel/debug-monitors.c:322 brk_handler+0x30/0xc0 arch/arm64/kernel/debug-monitors.c:329 do_debug_exception+0x184/0x340 arch/arm64/mm/fault.c:864 el1_dbg+0x48/0xb0 arch/arm64/kernel/entry-common.c:65 el1_sync_handler+0x170/0x1c8 arch/arm64/kernel/entry-common.c:93 el1_sync+0x80/0x100 arch/arm64/kernel/entry.S:594 debug_print_object+0x180/0x240 lib/debugobjects.c:485 __debug_check_no_obj_freed lib/debugobjects.c:967 [inline] debug_check_no_obj_freed+0x200/0x430 lib/debugobjects.c:998 slab_free_hook mm/slub.c:1536 [inline] slab_free_freelist_hook+0x190/0x210 mm/slub.c:1577 slab_free mm/slub.c:3138 [inline] kfree+0x13c/0x460 mm/slub.c:4119 bond_free_slave+0x8c/0xf8 drivers/net/bonding/bond_main.c:1492 __bond_release_one+0xe0c/0xec8 drivers/net/bonding/bond_main.c:2190 bond_slave_netdev_event drivers/net/bonding/bond_main.c:3309 [inline] bond_netdev_event+0x8f0/0xa70 drivers/net/bonding/bond_main.c:3420 notifier_call_chain+0xf0/0x200 kernel/notifier.c:83 __raw_notifier_call_chain kernel/notifier.c:361 [inline] raw_notifier_call_chain+0x44/0x58 kernel/notifier.c:368 call_netdevice_notifiers_info+0xbc/0x150 net/core/dev.c:2033 call_netdevice_notifiers_extack net/core/dev.c:2045 [inline] call_netdevice_notifiers net/core/dev.c:2059 [inline] rollback_registered_many+0x6a4/0xec0 net/core/dev.c:9347 unregister_netdevice_many.part.0+0x2c/0x1c0 net/core/dev.c:10509 unregister_netdevice_many net/core/dev.c:10508 [inline] default_device_exit_batch+0x294/0x338 net/core/dev.c:10992 ops_exit_list.isra.0+0xec/0x150 net/core/net_namespace.c:189 cleanup_net+0x44c/0x888 net/core/net_namespace.c:603 process_one_work+0x96c/0x18c0 kernel/workqueue.c:2269 worker_thread+0x3f0/0xc30 kernel/workqueue.c:2415 kthread+0x390/0x498 kernel/kthread.c:292 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:925 This is a potential use-after-free if the sysfs nodes are being accessed whilst removing the struct slave, so wait for the object destruction to complete before freeing the struct slave itself. Fixes: 07699f9a7c8d ("bonding: add sysfs /slave dir for bond slave devices.") Fixes: a068aab42258 ("bonding: Fix reference count leak in bond_sysfs_slave_add.") Cc: Qiushi Wu <wu000273@umn.edu> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jamie Iles <jamie@nuviainc.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20201120142827.879226-1-jamie@nuviainc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-01bonding: allow xfrm offload setup post-module-loadJarod Wilson1-0/+5
At the moment, bonding xfrm crypto offload can only be set up if the bonding module is loaded with active-backup mode already set. We need to be able to make this work with bonds set to AB after the bonding driver has already been loaded. So what's done here is: 1) move #define BOND_XFRM_FEATURES to net/bonding.h so it can be used by both bond_main.c and bond_options.c 2) set BOND_XFRM_FEATURES in bond_dev->hw_features universally, rather than only when loading in AB mode 3) wire up xfrmdev_ops universally too 4) disable BOND_XFRM_FEATURES in bond_dev->features if not AB 5) exit early (non-AB case) from bond_ipsec_offload_ok, to prevent a performance hit from traversing into the underlying drivers 5) toggle BOND_XFRM_FEATURES in bond_dev->wanted_features and call netdev_change_features() from bond_option_mode_set() In my local testing, I can change bonding modes back and forth on the fly, have hardware offload work when I'm in AB, and see no performance penalty to non-AB software encryption, despite having xfrm bits all wired up for all modes now. Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Reported-by: Huy Nguyen <huyn@mellanox.com> CC: Saeed Mahameed <saeedm@mellanox.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jakub Kicinski <kuba@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: netdev@vger.kernel.org CC: intel-wired-lan@lists.osuosl.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22bonding: support hardware encryption offload to slavesJarod Wilson1-0/+3
Currently, this support is limited to active-backup mode, as I'm not sure about the feasilibity of mapping an xfrm_state's offload handle to multiple hardware devices simultaneously, and we rely on being able to pass some hints to both the xfrm and NIC driver about whether or not they're operating on a slave device. I've tested this atop an Intel x520 device (ixgbe) using libreswan in transport mode, succesfully achieving ~4.3Gbps throughput with netperf (more or less identical to throughput on a bare NIC in this system), as well as successful failover and recovery mid-netperf. v2: just use CONFIG_XFRM_OFFLOAD for wrapping, isolate more code with it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jakub Kicinski <kuba@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: netdev@vger.kernel.org CC: intel-wired-lan@lists.osuosl.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-09Merge branch 'mlx5-next' of ↵Saeed Mahameed1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux This merge includes updates to bonding driver needed for the rdma stack, to avoid conflicts with the RDMA branch. Maor Gottlieb Says: ==================== Bonding: Add support to get xmit slave The following series adds support to get the LAG master xmit slave by introducing new .ndo - ndo_get_xmit_slave. Every LAG module can implement it and it first implemented in the bond driver. This is follow-up to the RFC discussion [1]. The main motivation for doing this is for drivers that offload part of the LAG functionality. For example, Mellanox Connect-X hardware implements RoCE LAG which selects the TX affinity when the resources are created and port is remapped when it goes down. The first part of this patchset introduces the new .ndo and add the support to the bonding module. The second part adds support to get the RoCE LAG xmit slave by building skb of the RoCE packet based on the AH attributes and call to the new .ndo. The third part change the mlx5 driver driver to set the QP's affinity port according to the slave which found by the .ndo. ==================== Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-07bonding: propagate transmit statusEric Dumazet1-5/+8
Currently, bonding always returns NETDEV_TX_OK to its caller. It is worth trying to be more accurate : TCP for instance can have different recovery strategies if it can have more precise status, if packet was dropped by slave qdisc. This is especially important when host is under stress. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07netpoll: accept NULL np argument in netpoll_send_skb()Eric Dumazet1-4/+1
netpoll_send_skb() callers seem to leak skb if the np pointer is NULL. While this should not happen, we can make the code more robust. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04bonding: remove useless stats_lock_keyCong Wang1-1/+0
After commit b3e80d44f5b1 ("bonding: fix lockdep warning in bond_get_stats()") the dynamic key is no longer necessary, as we compute nest level at run-time. So, we can just remove it to save some lockdep key entries. Test commands: ip link add bond0 type bond ip link add bond1 type bond ip link set bond0 master bond1 ip link set bond0 nomaster ip link set bond1 master bond0 Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01bonding: Add array of all slavesMaor Gottlieb1-1/+2
Keep all slaves in array so it could be used to get the xmit slave assume all the slaves are active. The logic to add slave to the array is like the usable slaves, except that we also add slaves that currently can't transmit - not up or active. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-01bonding: Rename slave_arr to usable_slavesMaor Gottlieb1-1/+1
Rename slave_arr to usable_slaves, since we will have two arrays, one for the usable slaves and the other to all slaves. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-28bonding: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05bonding: fix state transition issue in link monitoringJay Vosburgh1-2/+1
Since de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring"), the bonding driver has utilized two separate variables to indicate the next link state a particular slave should transition to. Each is used to communicate to a different portion of the link state change commit logic; one to the bond_miimon_commit function itself, and another to the state transition logic. Unfortunately, the two variables can become unsynchronized, resulting in incorrect link state transitions within bonding. This can cause slaves to become stuck in an incorrect link state until a subsequent carrier state transition. The issue occurs when a special case in bond_slave_netdev_event sets slave->link directly to BOND_LINK_FAIL. On the next pass through bond_miimon_inspect after the slave goes carrier up, the BOND_LINK_FAIL case will set the proposed next state (link_new_state) to BOND_LINK_UP, but the new_link to BOND_LINK_DOWN. The setting of the final link state from new_link comes after that from link_new_state, and so the slave will end up incorrectly in _DOWN state. Resolve this by combining the two variables into one. Reported-by: Aleksei Zakharov <zakharov.a.g@yandex.ru> Reported-by: Sha Zhang <zhangsha.zhang@huawei.com> Cc: Mahesh Bandewar <maheshb@google.com> Fixes: de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring") Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: remove unnecessary variables and callbackTaehee Yoo1-1/+0
This patch removes variables and callback these are related to the nested device structure. devices that can be nested have their own nest_level variable that represents the depth of nested devices. In the previous patch, new {lower/upper}_level variables are added and they replace old private nest_level variable. So, this patch removes all 'nest_level' variables. In order to avoid lockdep warning, ->ndo_get_lock_subclass() was added to get lockdep subclass value, which is actually lower nested depth value. But now, they use the dynamic lockdep key to avoid lockdep warning instead of the subclass. So, this patch removes ->ndo_get_lock_subclass() callback. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24bonding: use dynamic lockdep key instead of subclassTaehee Yoo1-0/+1
All bonding device has same lockdep key and subclass is initialized with nest_level. But actual nest_level value can be changed when a lower device is attached. And at this moment, the subclass should be updated but it seems to be unsafe. So this patch makes bonding use dynamic lockdep key instead of the subclass. Test commands: ip link add bond0 type bond for i in {1..5} do let A=$i-1 ip link add bond$i type bond ip link set bond$i master bond$A done ip link set bond5 master bond0 Splat looks like: [ 307.992912] WARNING: possible recursive locking detected [ 307.993656] 5.4.0-rc3+ #96 Tainted: G W [ 307.994367] -------------------------------------------- [ 307.995092] ip/761 is trying to acquire lock: [ 307.995710] ffff8880513aac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding] [ 307.997045] but task is already holding lock: [ 307.997923] ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding] [ 307.999215] other info that might help us debug this: [ 308.000251] Possible unsafe locking scenario: [ 308.001137] CPU0 [ 308.001533] ---- [ 308.001915] lock(&(&bond->stats_lock)->rlock#2/2); [ 308.002609] lock(&(&bond->stats_lock)->rlock#2/2); [ 308.003302] *** DEADLOCK *** [ 308.004310] May be due to missing lock nesting notation [ 308.005319] 3 locks held by ip/761: [ 308.005830] #0: ffffffff9fcc42b0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x466/0x8a0 [ 308.006894] #1: ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding] [ 308.008243] #2: ffffffff9f9219c0 (rcu_read_lock){....}, at: bond_get_stats+0x9f/0x500 [bonding] [ 308.009422] stack backtrace: [ 308.010124] CPU: 0 PID: 761 Comm: ip Tainted: G W 5.4.0-rc3+ #96 [ 308.011097] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 308.012179] Call Trace: [ 308.012601] dump_stack+0x7c/0xbb [ 308.013089] __lock_acquire+0x269d/0x3de0 [ 308.013669] ? register_lock_class+0x14d0/0x14d0 [ 308.014318] lock_acquire+0x164/0x3b0 [ 308.014858] ? bond_get_stats+0xb8/0x500 [bonding] [ 308.015520] _raw_spin_lock_nested+0x2e/0x60 [ 308.016129] ? bond_get_stats+0xb8/0x500 [bonding] [ 308.017215] bond_get_stats+0xb8/0x500 [bonding] [ 308.018454] ? bond_arp_rcv+0xf10/0xf10 [bonding] [ 308.019710] ? rcu_read_lock_held+0x90/0xa0 [ 308.020605] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 308.021286] ? bond_get_stats+0x9f/0x500 [bonding] [ 308.021953] dev_get_stats+0x1ec/0x270 [ 308.022508] bond_get_stats+0x1d1/0x500 [bonding] Fixes: d3fff6c443fe ("net: add netdev_lockdep_set_classes() helper") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-04bonding: add an option to specify a delay between peer notificationsVincent Bernat1-0/+1
Currently, gratuitous ARP/ND packets are sent every `miimon' milliseconds. This commit allows a user to specify a custom delay through a new option, `peer_notif_delay'. Like for `updelay' and `downdelay', this delay should be a multiple of `miimon' to avoid managing an additional work queue. The configuration logic is copied from `updelay' and `downdelay'. However, the default value cannot be set using a module parameter: Netlink or sysfs should be used to configure this feature. When setting `miimon' to 100 and `peer_notif_delay' to 500, we can observe the 500 ms delay is respected: 20:30:19.354693 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:19.874892 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:20.394919 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:20.914963 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 In bond_mii_monitor(), I have tried to keep the lock logic readable. The change is due to the fact we cannot rely on a notification to lower the value of `bond->send_peer_notif' as `NETDEV_NOTIFY_PEERS' is only triggered once every N times, while we need to decrement the counter each time. iproute2 also needs to be updated to be able to specify this new attribute through `ip link'. Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09bonding: add slave_foo printk macrosJarod Wilson1-0/+9
Where possible, we generally want both the bond master and the relevant slave information in message output. Standardize the format using new slave_* printk macros. Suggested-by: Joe Perches <joe@perches.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26bonding: avoid possible dead-lockMahesh Bandewar1-6/+1
Syzkaller reported this on a slightly older kernel but it's still applicable to the current kernel - ====================================================== WARNING: possible circular locking dependency detected 4.18.0-next-20180823+ #46 Not tainted ------------------------------------------------------ syz-executor4/26841 is trying to acquire lock: 00000000dd41ef48 ((wq_completion)bond_dev->name){+.+.}, at: flush_workqueue+0x2db/0x1e10 kernel/workqueue.c:2652 but task is already holding lock: 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline] 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4708 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (rtnl_mutex){+.+.}: __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77 bond_netdev_notify drivers/net/bonding/bond_main.c:1310 [inline] bond_netdev_notify_work+0x44/0xd0 drivers/net/bonding/bond_main.c:1320 process_one_work+0xc73/0x1aa0 kernel/workqueue.c:2153 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #1 ((work_completion)(&(&nnw->work)->work)){+.+.}: process_one_work+0xc0b/0x1aa0 kernel/workqueue.c:2129 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #0 ((wq_completion)bond_dev->name){+.+.}: lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: (wq_completion)bond_dev->name --> (work_completion)(&(&nnw->work)->work) --> rtnl_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock((work_completion)(&(&nnw->work)->work)); lock(rtnl_mutex); lock((wq_completion)bond_dev->name); *** DEADLOCK *** 1 lock held by syz-executor4/26841: stack backtrace: CPU: 1 PID: 26841 Comm: syz-executor4 Not tainted 4.18.0-next-20180823+ #46 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_circular_bug.isra.34.cold.55+0x1bd/0x27d kernel/locking/lockdep.c:1222 check_prev_add kernel/locking/lockdep.c:1862 [inline] check_prevs_add kernel/locking/lockdep.c:1975 [inline] validate_chain kernel/locking/lockdep.c:2416 [inline] __lock_acquire+0x3449/0x5020 kernel/locking/lockdep.c:3412 lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457089 Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2df20a5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f2df20a66d4 RCX: 0000000000457089 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 0000000000930140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000004d40b8 R14: 00000000004c8ad8 R15: 0000000000000001 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-11net: Add lag.h, net_lag_port_dev_txable()Petr Machata1-0/+13
LAG devices (team or bond) recognize for each one of their slave devices whether LAG traffic is going to be sent through that device. Bond calls such devices "active", team calls them "txable". When this state changes, a NETDEV_CHANGELOWERSTATE notification is distributed, together with a netdev_notifier_changelowerstate_info structure that for LAG devices includes a tx_enabled flag that refers to the new state. The notification thus makes it possible to react to the changes in txability in drivers. However there's no way to query txability from the outside on demand. That is problematic namely for mlxsw, which when resolving ERSPAN packet path, may encounter a LAG device, and needs to determine which of the slaves it should choose. To that end, introduce a new function, net_lag_port_dev_txable(), which determines whether a given slave device is "active" or "txable" (depending on the flavor of the LAG device). That function then dispatches to per-LAG-flavor helpers, bond_is_active_slave_dev() resp. team_port_dev_txable(). Because there currently is no good place where net_lag_port_dev_txable() should be added, introduce a new header file, lag.h, which should from now on hold any logic common to both team and bond. (But keep netif_is_lag_master() together with the rest of netif_is_*_master() functions). Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16bonding: allow use of tx hashing in balance-albDebabrata Banerjee1-2/+9
The rx load balancing provided by balance-alb is not mutually exclusive with using hashing for tx selection, and should provide a decent speed increase because this eliminates spinlocks and cache contention. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11bonding: send learning packets for vlans on slaveDebabrata Banerjee1-0/+1
There was a regression at some point from the intended functionality of commit f60c3704e87d ("bonding: Fix alb mode to only use first level vlans.") Given the return value vlan_get_encap_level() we need to store the nest level of the bond device, and then compare the vlan's encap level to this. Without this, this check always fails and learning packets are never sent. In addition, this same commit caused a regression in the behavior of balance_alb, which requires learning packets be sent for all interfaces using the slave's mac in order to load balance properly. For vlan's that have not set a user mac, we can send after checking one bit. Otherwise we need send the set mac, albeit defeating rx load balancing for that vlan. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25bonding: remove rtmsg_ifinfo called after bond_lower_state_changedXin Long1-4/+0
After the patch 'rtnetlink: bring NETDEV_CHANGELOWERSTATE event process back to rtnetlink_event', bond_lower_state_changed would generate NETDEV_CHANGEUPPER event which would send a notification to userspace in rtnetlink_event. There's no need to call rtmsg_ifinfo to send the notification any more. So this patch is to remove it from these places after bond_lower_state_changed. Besides, after this, rtmsg_ifinfo is not needed to be exported. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: Add extack to ndo_add_slaveDavid Ahern1-1/+2
Pass extack to do_set_master and down to ndo_add_slave Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 13:46:19 +0000