summaryrefslogtreecommitdiff
path: root/include/linux/mmc
AgeCommit message (Collapse)AuthorFilesLines
2023-11-03mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54ABean Huo1-0/+2
Micron MTFC4GACAJCN eMMC supports cache but requires that flush cache operation be allowed only after a write has occurred. Otherwise, the cache flush command or subsequent commands will time out. Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Rafael Beims <rafael.beims@toradex.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231030224809.59245-1-beanhuo@iokpp.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-09-27mmc: core: Allow dynamical updates of the number of requests for hsqWenchao Chen1-0/+1
To allow dynamical updates of the current number of used in-flight requests, let's move away from using a hard-coded value to a use a corresponding variable in the struct mmc_host. This can be valuable when optimizing for certain I/O request sequences, as shown by subsequent changes. Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com> Link: https://lore.kernel.org/r/20230919074707.25517-2-wenchao.chen@unisoc.com [Ulf: Re-wrote the commitmsg to clarify the change] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-08-25mmc: core: Add host specific tuning support for SD HS modeWenchao Chen1-0/+8
To support the need for host specific tuning for SD high-speed mode, let's add two new optional callbacks, ->prepare|execute_sd_hs_tuning() and let's call them when switching into the SD high-speed mode. Note that, during the tuning process it's also needed for host drivers to send commands to the SD card to verify that the tuning process succeeds. Therefore, let's also share the corresponding functions from the core to allow this. Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com> Link: https://lore.kernel.org/r/20230825091743.15613-2-wenchao.chen@unisoc.com [Ulf: Dropped unnecessary function declarations and updated the commit msg] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-28Merge tag 'net-next-6.5' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking changes from Jakub Kicinski: "WiFi 7 and sendpage changes are the biggest pieces of work for this release. The latter will definitely require fixes but I think that we got it to a reasonable point. Core: - Rework the sendpage & splice implementations Instead of feeding data into sockets page by page extend sendmsg handlers to support taking a reference on the data, controlled by a new flag called MSG_SPLICE_PAGES Rework the handling of unexpected-end-of-file to invoke an additional callback instead of trying to predict what the right combination of MORE/NOTLAST flags is Remove the MSG_SENDPAGE_NOTLAST flag completely - Implement SCM_PIDFD, a new type of CMSG type analogous to SCM_CREDENTIALS, but it contains pidfd instead of plain pid - Enable socket busy polling with CONFIG_RT - Improve reliability and efficiency of reporting for ref_tracker - Auto-generate a user space C library for various Netlink families Protocols: - Allow TCP to shrink the advertised window when necessary, prevent sk_rcvbuf auto-tuning from growing the window all the way up to tcp_rmem[2] - Use per-VMA locking for "page-flipping" TCP receive zerocopy - Prepare TCP for device-to-device data transfers, by making sure that payloads are always attached to skbs as page frags - Make the backoff time for the first N TCP SYN retransmissions linear. Exponential backoff is unnecessarily conservative - Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO) - Avoid waking up applications using TLS sockets until we have a full record - Allow using kernel memory for protocol ioctl callbacks, paving the way to issuing ioctls over io_uring - Add nolocalbypass option to VxLAN, forcing packets to be fully encapsulated even if they are destined for a local IP address - Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure in-kernel ECMP implementation (e.g. Open vSwitch) select the same link for all packets. Support L4 symmetric hashing in Open vSwitch - PPPoE: make number of hash bits configurable - Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client (ipconfig) - Add layer 2 miss indication and filtering, allowing higher layers (e.g. ACL filters) to make forwarding decisions based on whether packet matched forwarding state in lower devices (bridge) - Support matching on Connectivity Fault Management (CFM) packets - Hide the "link becomes ready" IPv6 messages by demoting their printk level to debug - HSR: don't enable promiscuous mode if device offloads the proto - Support active scanning in IEEE 802.15.4 - Continue work on Multi-Link Operation for WiFi 7 BPF: - Add precision propagation for subprogs and callbacks. This allows maintaining verification efficiency when subprograms are used, or in fact passing the verifier at all for complex programs, especially those using open-coded iterators - Improve BPF's {g,s}setsockopt() length handling. Previously BPF assumed the length is always equal to the amount of written data. But some protos allow passing a NULL buffer to discover what the output buffer *should* be, without writing anything - Accept dynptr memory as memory arguments passed to helpers - Add routing table ID to bpf_fib_lookup BPF helper - Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands - Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark maps as read-only) - Show target_{obj,btf}_id in tracing link fdinfo - Addition of several new kfuncs (most of the names are self-explanatory): - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(), bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size() and bpf_dynptr_clone(). - bpf_task_under_cgroup() - bpf_sock_destroy() - force closing sockets - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs Netfilter: - Relax set/map validation checks in nf_tables. Allow checking presence of an entry in a map without using the value - Increase ip_vs_conn_tab_bits range for 64BIT builds - Allow updating size of a set - Improve NAT tuple selection when connection is closing Driver API: - Integrate netdev with LED subsystem, to allow configuring HW "offloaded" blinking of LEDs based on link state and activity (i.e. packets coming in and out) - Support configuring rate selection pins of SFP modules - Factor Clause 73 auto-negotiation code out of the drivers, provide common helper routines - Add more fool-proof helpers for managing lifetime of MDIO devices associated with the PCS layer - Allow drivers to report advanced statistics related to Time Aware scheduler offload (taprio) - Allow opting out of VF statistics in link dump, to allow more VFs to fit into the message - Split devlink instance and devlink port operations New hardware / drivers: - Ethernet: - Synopsys EMAC4 IP support (stmmac) - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches - Marvell 88E6250 7 port switches - Microchip LAN8650/1 Rev.B0 PHYs - MediaTek MT7981/MT7988 built-in 1GE PHY driver - WiFi: - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps - Realtek RTL8723DS (SDIO variant) - Realtek RTL8851BE - CAN: - Fintek F81604 Drivers: - Ethernet NICs: - Intel (100G, ice): - support dynamic interrupt allocation - use meta data match instead of VF MAC addr on slow-path - nVidia/Mellanox: - extend link aggregation to handle 4, rather than just 2 ports - spawn sub-functions without any features by default - OcteonTX2: - support HTB (Tx scheduling/QoS) offload - make RSS hash generation configurable - support selecting Rx queue using TC filters - Wangxun (ngbe/txgbe): - add basic Tx/Rx packet offloads - add phylink support (SFP/PCS control) - Freescale/NXP (enetc): - report TAPRIO packet statistics - Solarflare/AMD: - support matching on IP ToS and UDP source port of outer header - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6 - add devlink dev info support for EF10 - Virtual NICs: - Microsoft vNIC: - size the Rx indirection table based on requested configuration - support VLAN tagging - Amazon vNIC: - try to reuse Rx buffers if not fully consumed, useful for ARM servers running with 16kB pages - Google vNIC: - support TCP segmentation of >64kB frames - Ethernet embedded switches: - Marvell (mv88e6xxx): - enable USXGMII (88E6191X) - Microchip: - lan966x: add support for Egress Stage 0 ACL engine - lan966x: support mapping packet priority to internal switch priority (based on PCP or DSCP) - Ethernet PHYs: - Broadcom PHYs: - support for Wake-on-LAN for BCM54210E/B50212E - report LPI counter - Microsemi PHYs: support RGMII delay configuration (VSC85xx) - Micrel PHYs: receive timestamp in the frame (LAN8841) - Realtek PHYs: support optional external PHY clock - Altera TSE PCS: merge the driver into Lynx PCS which it is a variant of - CAN: Kvaser PCIEcan: - support packet timestamping - WiFi: - Intel (iwlwifi): - major update for new firmware and Multi-Link Operation (MLO) - configuration rework to drop test devices and split the different families - support for segmented PNVM images and power tables - new vendor entries for PPAG (platform antenna gain) feature - Qualcomm 802.11ax (ath11k): - Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID Advertisement (EMA) support in AP mode - support factory test mode - RealTek (rtw89): - add RSSI based antenna diversity - support U-NII-4 channels on 5 GHz band - RealTek (rtl8xxxu): - AP mode support for 8188f - support USB RX aggregation for the newer chips" * tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits) net: scm: introduce and use scm_recv_unix helper af_unix: Skip SCM_PIDFD if scm->pid is NULL. net: lan743x: Simplify comparison netlink: Add __sock_i_ino() for __netlink_diag_dump(). net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses Revert "af_unix: Call scm_recv() only after scm_set_cred()." phylink: ReST-ify the phylink_pcs_neg_mode() kdoc libceph: Partially revert changes to support MSG_SPLICE_PAGES net: phy: mscc: fix packet loss due to RGMII delays net: mana: use vmalloc_array and vcalloc net: enetc: use vmalloc_array and vcalloc ionic: use vmalloc_array and vcalloc pds_core: use vmalloc_array and vcalloc gve: use vmalloc_array and vcalloc octeon_ep: use vmalloc_array and vcalloc net: usb: qmi_wwan: add u-blox 0x1312 composition perf trace: fix MSG_SPLICE_PAGES build error ipvlan: Fix return value of ipvlan_queue_xmit() netfilter: nf_tables: fix underflow in chain reference counter netfilter: nf_tables: unbind non-anonymous set if rule construction fails ...
2023-06-20mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019Marek Vasut1-0/+1
This microSD card never clears Flush Cache bit after cache flush has been started in sd_flush_cache(). This leads e.g. to failure to mount file system. Add a quirk which disables the SD cache for this specific card from specific manufacturing date of 11/2019, since on newer dated cards from 05/2023 the cache flush works correctly. Fixes: 08ebf903af57 ("mmc: core: Fixup support for writeback-cache for eMMC and SD") Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20230620102713.7701-1-marex@denx.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-05-25mmc: sdio: Add/rename SDIO ID of the RTL8723DS SDIO wifi cardsMartin Blumenstingl1-1/+2
RTL8723DS comes in two variant and each of them has their own SDIO ID: - 0xd723 can connect two antennas. The WiFi part is still 1x1 so the second antenna can be dedicated to Bluetooth - 0xd724 can only connect one antenna so it's shared between WiFi and Bluetooth Add a new entry for the single antenna RTL8723DS (0xd724) which can be found on the MangoPi MQ-Quad. Also rename the existing RTL8723DS entry (0xd723) so it's name reflects that it's the variant with support for two antennas. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230522202425.1827005-4-martin.blumenstingl@googlemail.com
2023-04-26Merge tag 'net-next-6.4' of ↵Linus Torvalds1-1/+13
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances - Reduce compound page head access for zero-copy data transfers - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking - Add lockless accesses annotation to sk_err[_soft] - Optimize again the skb struct layout - Extends the skb drop reasons to make it usable by multiple subsystems - Better const qualifier awareness for socket casts BPF: - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward - Add more precise memory usage reporting for all BPF map types - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them - Add ARM32 USDT support to libbpf - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations Protocols: - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter: - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support - The iptables 32bit compat interface isn't compiled in by default anymore - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device Driver API: - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them - Allow the page_pool to directly recycle the pages from safely localized NAPI - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization - Add YNL support for user headers and struct attrs - Add partial YNL specification for devlink - Add partial YNL specification for ethtool - Add tc-mqprio and tc-taprio support for preemptible traffic classes - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device - Add basic LED support for switch/phy - Add NAPI documentation, stop relaying on external links - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space - Add transceiver support and improve the error messages for CAN-FD controllers New hardware / drivers: - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers: - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support" * tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ...
2023-04-14wifi: brcmfmac: add Cypress 43439 SDIO idsMarek Vasut1-1/+4
Add SDIO ids for use with the muRata 1YN (Cypress CYW43439). The odd thing about this is that the previous 1YN populated on M.2 card for evaluation purposes had BRCM SDIO vendor ID, while the chip populated on real hardware has a Cypress one. The device ID also differs between the two devices. But they are both 43439 otherwise, so add the IDs for both. On-device 1YN (43439), the new one, chip label reads "1YN": ``` /sys/.../mmc_host/mmc2/mmc2:0001 # cat vendor device 0x04b4 0xbd3d ``` EA M.2 evaluation board 1YN (43439), the old one, chip label reads "1YN ES1.4": ``` /sys/.../mmc_host/mmc0/mmc0:0001/# cat vendor device 0x02d0 0xa9a6 ``` Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230407203752.128539-1-marex@denx.de
2023-04-12mmc: sdio: add Realtek SDIO vendor ID and various wifi device IDsMartin Blumenstingl1-0/+9
Add the SDIO vendor ID for Realtek and some device IDs extracted from their GPL vendor driver. This will be useful in the future when the rtw88 driver gains support for these chips. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Pali Rohár <pali@kernel.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-7-martin.blumenstingl@googlemail.com
2023-03-23mmc: core: add helpers mmc_regulator_enable/disable_vqmmcHeiner Kallweit1-0/+3
There's a number of drivers (e.g. dw_mmc, meson-gx, mmci, sunxi) using the same mechanism and a private flag vqmmc_enabled to deal with enabling/disabling the vqmmc regulator. Move this to the core and create new helpers mmc_regulator_enable_vqmmc and mmc_regulator_disable_vqmmc. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/71586432-360f-9b92-17f6-b05a8a971bc2@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-02-27Merge tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds2-0/+2
Pull MMC updates from Ulf Hansson: "MMC core: - Extend slot-gpio to be used for host specific card detect interrupts - Align to common busy polling behaviour for mmc ioctls - Suggest the BFQ I/O scheduler to be built along with MMC/SD support - Add devm_mmc_alloc_host() to enable further cleanups in host drivers MMC host: - atmel-mci: Fix race condition when stopping/starting a command - dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant - dw_mmc-rockchip: Add support for the RK3588 variant - jz4740: Add support for the vqmmc power supply - meson-gx: Convert the DT bindings to the dt-schema - meson-gx: Enable the platform interrupt to be used for card detect - moxart: Set the supported maximum request/block/segment sizes - renesas,sdhi: Add support for the RZ/V2M variants - sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS - sdhci-esdhc-imx: Improve tuning logic support - sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants - sdhci-of-dwcmshc: Add the missing device table IDs for acpi - sdhci-of-dwcmshc: Improve clock support for the Rockchip variant - sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant - sdhci-pxav2: Add support for the PXA168 V1 variant - sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant - uniphier-sd: Add support for SD UHS-I speed modes" * tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits) mmc: meson-gx: Use devm_platform_get_and_ioremap_resource() mmc: meson-gx: constify member data of struct meson_host mmc: meson-gx: use devm_clk_get_enabled() for core clock mmc: core: fix return value check in devm_mmc_alloc_host() dt-bindings: mmc: meson-gx: fix interrupt binding mmc: meson-gx: support platform interrupt as card detect interrupt dt-bindings: mmc: meson-gx: support specifying cd interrupt mmc: core: support setting card detect interrupt from drivers mmc: starfive: Add sdio/emmc driver support dt-bindings: mmc: Add StarFive MMC module dt-bindings: mmc: sdhci-msm: Allow 1 icc path dt-bindings: mmc: rockchip-dw-mshc: Add RK3588 compatible string mmc: core: Align to common busy polling behaviour for mmc ioctls dt-bindings: mmc: Add resets property to cadence SDHCI binding mmc: meson-gx: remove meson_mmc_get_cd mmc: moxart: set maximum request/block/segment sizes mmc: sdhci-brcmstb: Use devm_platform_get_and_ioremap_resource() mmc: sdhci-of-dwcmshc: add the missing device table IDs for acpi mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform mmc: jz4740: Add support for vqmmc power supply ...
2023-02-15mmc: core: support setting card detect interrupt from driversHeiner Kallweit1-0/+1
On certain platforms like Amlogic Meson gpiod_to_irq() isn't supported due to the design of gpio / interrupt controller. Therefore provide an option for drivers to pass the card detect interrupt number (retrieved e.g. from device tree) to mmc core. Suggested-by refers to the mechanism to pass and store the interrupt. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/5777f38b-465f-ce48-a87f-5eb8b3c57b0a@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-02-13mmc: core: add devm_mmc_alloc_hostHeiner Kallweit1-0/+1
Add a device-managed version of mmc_alloc_host(). The argument order is reversed compared to mmc_alloc_host() because device-managed functions typically have the device argument first. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/6d8f9fdc-7c9e-8e4f-e6ef-5470b971c74e@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-02-13wifi: mwifiex: Support SD8978 chipsetLukas Wunner1-0/+1
The Marvell SD8978 (aka NXP IW416) uses identical registers as SD8987, so reuse the existing mwifiex_reg_sd8987 definition. Note that mwifiex_reg_sd8977 and mwifiex_reg_sd8997 are likewise identical, save for the fw_dump_ctrl register: They define it as 0xf0 whereas mwifiex_reg_sd8987 defines it as 0xf9. I've verified that 0xf9 is the correct value on SD8978. NXP's out-of-tree driver uses 0xf9 for all of them, so there's a chance that 0xf0 is not correct in the mwifiex_reg_sd8977 and mwifiex_reg_sd8997 definitions. I cannot test that for lack of hardware, hence am leaving it as is. NXP has only released a firmware which runs Bluetooth over UART. Perhaps Bluetooth over SDIO is unsupported by this chipset. Consequently, only an "sdiouart" firmware image is referenced, not an alternative "sdsd" image. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/536b4f17a72ca460ad1b07045757043fb0778988.1674827105.git.lukas@wunner.de
2022-11-18mmc: core: Fix ambiguous TRIM and DISCARD argChristian Löhle1-1/+1
Clean up the MMC_TRIM_ARGS define that became ambiguous with DISCARD introduction. While at it, let's fix one usage where MMC_TRIM_ARGS falsely included DISCARD too. Fixes: b3bf915308ca ("mmc: core: new discard feature support at eMMC v4.5") Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/11376b5714964345908f3990f17e0701@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-10-06mmc: core: Add SD card quirk for broken discardAvri Altman1-0/+1
Some SD-cards from Sandisk that are SDA-6.0 compliant reports they supports discard, while they actually don't. This might cause mk2fs to fail while trying to format the card and revert it to a read-only mode. To fix this problem, let's add a card quirk (MMC_QUIRK_BROKEN_SD_DISCARD) to indicate that we shall fall-back to use the legacy erase command instead. Signed-off-by: Avri Altman <avri.altman@wdc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220928095744.16455-1-avri.altman@wdc.com [Ulf: Updated the commit message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-10-05Merge tag 'mmc-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds1-1/+1
Pull MMC updates from Ulf Hansson: - dt-bindings: Increase maximum supported frequency to 384MHz - dw_mmc-rockchip: Add support for the rk3128 variant - meson-gx: Add support for SDIO interrupts - mtk-sd: Add support for MT6795 Helio X10 variant - sdhci: Improve the code by centralizing the CMD/DATA reset handling - sdhci-msm: - Add support for the sdm670 variant - Add support for the sm6115 variant - sdhci-omap: Make Vignesh replace Kishon as the maintainer - sdhci-pci-o2micro: Disable fragile support for DDR50 in favor of SDR50 - sdhci-sprd: Fix clock divider limitation * tag 'mmc-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (31 commits) mmc: sdhci: Centralize CMD and DATA reset handling mmc: sdhci: Get rid of SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS mmc: sdhci: Remove misleading comment about resets mmc: sdhci: Separate out sdhci_reset_for_all() MAINTAINERS: Add Vignesh as maintainer of TI SDHCI OMAP DRIVER mmc: sdhci-msm: add compatible string check for sdm670 dt-bindings: mmc: sdhci-msm: add sdm670 compatible mmc: wmt-sdmmc: Fix an error handling path in wmt_mci_probe() mmc: rtsx_usb_sdmmc: Remove the unneeded result variable mmc: sdhci-of-aspeed: Add dependency on ARCH_ASPEED mmc: mtk-sd: Add support for MT6795 Helio X10 mmc: mtk-sd: Reorder of_device_id and platform data by name mmc: sdhci-sprd: Fix the limitation of div dt-bindings: mmc: sdhci-msm: Add pinctrl-1 property dt-bindings: mmc: rockchip: add rockchip,rk3128-dw-mshc dt-bindings: mmc: renesas,sdhi: Add iommus property mmc: sdhci_am654: Remove the unneeded result variable mmc: meson-gx: add SDIO interrupt support mmc: meson-gx: adjust and re-use constant IRQ_EN_MASK mmc: jz4740_mmc: Fix error check for dma_map_sg ...
2022-09-14mmc: core: Switch to basic workqueue API for sdio_irq_workHeiner Kallweit1-1/+1
The delay parameter isn't set by any user, therefore simplify the code and switch to the basic workqueue API w/o delay support. This also reduces the size of struct mmc_host. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/13d8200a-e2a8-d907-38ce-a16fc5ce14aa@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-09-07wifi: brcmfmac: add 43439 SDIO ids and initializationMarek Vasut1-0/+1
Add HW and SDIO ids for use with the muRata 1YN (Cypress CYW43439). Add the firmware mapping structures for the CYW43439 chipset. The 43439 needs some things setup similar to the 43430 chipset. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220827024903.617294-1-marex@denx.de
2022-07-26mmc: core: Add support for SDIO wakeup interruptAxe Yang2-1/+12
If wakeup-source flag is set in host dts node, parse EAI information from SDIO CCCR interrupt externsion segment for in-band wakeup. If async interrupt is supported by SDIO card then enable it and set enable_async_irq flag in sdio_cccr structure to 1. The parse flow is implemented in sdio_read_cccr(). Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Axe Yang <axe.yang@mediatek.com> Link: https://lore.kernel.org/r/20220726062842.18846-3-axe.yang@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-13mmc: core: Use mmc_card_* macro and add a new for the sd_combo typeSeunghui Lee1-0/+1
Add mmc_card_sd_combo() macro for sd combo type card and use the mmc_card_* macro to simplify code instead of comparing card->type. Signed-off-by: Seunghui Lee <sh043.lee@samsung.com> Link: https://lore.kernel.org/r/20220713033635.28432-2-sh043.lee@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: sdhci: Capture eMMC and SD card errorsShaik Sajida Bhanu1-0/+6
Add changes to capture eMMC and SD card errors. This is useful for debug and testing. Signed-off-by: Liangliang Lu <quic_luliang@quicinc.com> Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com> Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1653674036-21829-3-git-send-email-quic_c_sbhanu@quicinc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: core: Capture eMMC and SD card errorsShaik Sajida Bhanu1-0/+26
Add changes to capture eMMC and SD card errors. This is useful for debug and testing. Signed-off-by: Liangliang Lu <quic_luliang@quicinc.com> Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com> Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Ram Prakash Gupta <quic_rampraka@quicinc.com> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1653674036-21829-2-git-send-email-quic_c_sbhanu@quicinc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: sh_mmcif: move platform_data header to proper locationWolfram Sang1-209/+0
We have a dedicated directory for platform_data meanwhile, don't spoil the MMC directory with it. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220412093102.3428-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: improve API to make clear hw_reset callback is for cardsWolfram Sang1-1/+1
To make it unambiguous that the hw_reset callback is for cards and not for controllers, we add 'card' to the callback name and convert all users in one go. We keep the argument as mmc_host, though, because the callback is used very early when mmc_card is not yet populated. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220408080045.6497-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: core: improve API to make clear that mmc_sw_reset is for cardsWolfram Sang1-1/+1
To make it unambiguous that mmc_sw_reset() is for cards and not for controllers, we make the function argument mmc_card instead of mmc_host. There are no users to convert currently. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220408080045.6497-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-08mmc: core: improve API to make clear mmc_hw_reset is for cardsWolfram Sang1-1/+1
To make it unambiguous that mmc_hw_reset() is for cards and not for controllers, we make the function argument mmc_card instead of mmc_host. Also, all users are converted. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220408080045.6497-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-11-17Merge tag 'for-net-next-2021-11-16' of ↵David S. Miller1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add support for AOSP Bluetooth Quality Report - Enables AOSP extension for Mediatek Chip (MT7921 & MT7922) - Rework of HCI command execution serialization ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01Merge tag 'mmc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds2-18/+4
Pull MMC and MEMSTICK updates from Ulf Hansson: "MMC core: - Update maintainer and URL for the mmc-utils - Set default label for slot-gpio in case of no con-id - Convert MMC card DT bindings to a schema - Add optional host specific tuning support for eMMC HS400 - Add error handling of add_disk() MMC host: - mtk-sd: Add host specific tuning support for eMMC HS400 - mtk-sd: Make DMA handling more robust - dw_mmc: Prevent hangs for some data writes - dw_mmc: Move away from using the ->init_card() callback - mxs-mmc: Manage the regulator in the error path and in ->remove() - sdhci-cadence: Add support for the Microchip MPFS variant - sdhci-esdhc-imx: Add support for the NXP S32G2 variant - sdhci-of-arasan: Add support for the Intel Thunder Bay variant - sdhci-omap: Prepare to support more SoCs - sdhci-omap: Add support for omap3 and omap4 variants - sdhci-omap: Add support for power management - sdhci-omap: Add support for system wakeups - sdhci-msm: Add support for the msm8226 variant - sdhci-sprd: Verify that the DLL locks according to spec MEMSTICK: - Add error handling of add_disk() - A couple of small fixes and improvements" * tag 'mmc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (60 commits) docs: mmc: update maintainer name and URL mmc: dw_mmc: exynos: Fix spelling mistake "candiates" -> candidates MAINTAINERS: drop obsolete file pattern in SDHCI DRIVER section mmc: sdhci-esdhc-imx: add NXP S32G2 support dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G2 support mmc: dw_mmc: Drop use of ->init_card() callback mmc: sdhci-omap: Fix build if CONFIG_PM_SLEEP is not set mmc: sdhci-omap: Remove forward declaration of sdhci_omap_context_save() memstick: r592: Fix a UAF bug when removing the driver mmc: mxs-mmc: disable regulator on error and in the remove function mmc: sdhci-omap: Configure optional wakeirq mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM mmc: sdhci-omap: Implement PM runtime functions mmc: sdhci-omap: Add omap_offset to support omap3 and earlier mmc: sdhci-omap: Handle voltages to add support omap4 dt-bindings: sdhci-omap: Update binding for legacy SoCs mmc: sdhci-pci: Remove dead code (rst_n_gpio et al) mmc: sdhci-pci: Remove dead code (cd_gpio, cd_irq et al) mmc: sdhci-pci: Remove dead code (struct sdhci_pci_data et al) mmc: sdhci: Remove unused prototype declaration in the header ...
2021-10-25mmc: add MT7921 SDIO identifiers for MediaTek Bluetooth devicesSean Wang1-0/+1
The MT7961 SDIO identifier for MediaTek Bluetooth devices were being referred in the MediaTek Bluetooth driver. Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-21blk-crypto: rename blk_keyslot_manager to blk_crypto_profileEric Biggers1-1/+1
blk_keyslot_manager is misnamed because it doesn't necessarily manage keyslots. It actually does several different things: - Contains the crypto capabilities of the device. - Provides functions to control the inline encryption hardware. Originally these were just for programming/evicting keyslots; however, new functionality (hardware-wrapped keys) will require new functions here which are unrelated to keyslots. Moreover, device-mapper devices already (ab)use "keyslot_evict" to pass key eviction requests to their underlying devices even though device-mapper devices don't have any keyslots themselves (so it really should be "evict_key", not "keyslot_evict"). - Sometimes (but not always!) it manages keyslots. Originally it always did, but device-mapper devices don't have keyslots themselves, so they use a "passthrough keyslot manager" which doesn't actually manage keyslots. This hack works, but the terminology is unnatural. Also, some hardware doesn't have keyslots and thus also uses a "passthrough keyslot manager" (support for such hardware is yet to be upstreamed, but it will happen eventually). Let's stop having keyslot managers which don't actually manage keyslots. Instead, rename blk_keyslot_manager to blk_crypto_profile. This is a fairly big change, since for consistency it also has to update keyslot manager-related function names, variable names, and comments -- not just the actual struct name. However it's still a fairly straightforward change, as it doesn't change any actual functionality. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20211018180453.40441-4-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-21blk-crypto: rename keyslot-manager files to blk-crypto-profileEric Biggers1-1/+1
In preparation for renaming struct blk_keyslot_manager to struct blk_crypto_profile, rename the keyslot-manager.h and keyslot-manager.c source files. Renaming these files separately before making a lot of changes to their contents makes it easier for git to understand that they were renamed. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20211018180453.40441-3-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19mmc: sdhci-pci: Remove dead code (struct sdhci_pci_data et al)Andy Shevchenko1-18/+0
The last user of this struct gone a couple of releases ago. Besides that there were not so many users of this API for more than 10 years: 1/ The one is Intel Merrifield, that had been added 2016-08-31 by the commit 3976b0380b31 ("x86/platform/intel-mid: Enable SD card detection on Merrifield") and removed 2021-02-11 by the commit 4590d98f5a4f ("sfi: Remove framework for deprecated firmware"). 2/ The other is Intel Sunrisepoint related, that had been added 2015-02-06 by the commit e1bfad6d936d ("mmc: sdhci-pci: Add support for drive strength selection for SPT") and removed 2017-03-20 by the commit 51ced59cc02e ("mmc: sdhci-pci: Use ACPI DSM to get driver strength for some Intel devices"). Effectively this is a revert of the commit 52c506f0bc72 ("mmc: sdhci-pci: add platform data"). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20211014132613.27861-4-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-12mmc: core: Add host specific tuning support for eMMC HS400 modeWenbin Mei1-0/+4
This adds a ->execute_hs400_tuning() host callback to enable optional support for host specific tuning for eMMC HS400 mode. Additionally, share mmc_get_ext_csd() through the public host headerfile, to allow it to be used by the host drivers, which is needed to support the HS400 tuning. Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Link: https://lore.kernel.org/r/20210917124803.22871-3-wenbin.mei@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-31Merge tag 'net-next-5.15' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Enable memcg accounting for various networking objects. BPF: - Introduce bpf timers. - Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library. - Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding. - Add support for UNIX sockets for BPF sockmap. - Extend BPF iterator support for UNIX domain sockets. - Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm. Protocols: - Support IOAM Pre-allocated Trace with IPv6. - Support Management Component Transport Protocol. - bridge: multicast: add vlan support. - netfilter: add hooks for the SRv6 lightweight tunnel driver. - tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP - mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing - af_unix: add OOB notification support. - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router. - mac80211: Target Wake Time support in AP mode. - can: j1939: extend UAPI to notify about RX status. Driver APIs: - Add page frag support in page pool API. - Many improvements to the DSA (distributed switch) APIs. - ethtool: extend IRQ coalesce uAPI with timer reset modes. - devlink: control which auxiliary devices are created. - Support CAN PHYs via the generic PHY subsystem. - Proper cross-chip support for tag_8021q. - Allow TX forwarding for the software bridge data path to be offloaded to capable devices. Drivers: - veth: more flexible channels number configuration. - openvswitch: introduce per-cpu upcall dispatch. - Add internet mix (IMIX) mode to pktgen. - Transparently handle XDP operations in the bonding driver. - Add LiteETH network driver. - Renesas (ravb): - support Gigabit Ethernet IP - NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge - Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation - Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings - Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels - Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state - Netronome Ethernet (nfp): - add conntrack offload support - Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device - Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz) - Xen pv driver: - harden netfront against malicious backends - Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces Refactor: - Ambient BPF run context and cgroup storage cleanup. - Compat rework for ndo_ioctl. Old code removal: - prism54 remove the obsoleted driver, deprecated by the p54 driver. - wan: remove sbni/granch driver" * tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...
2021-08-31Merge tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds2-3/+2
Pull MMC and MEMSTICK updates from Ulf Hansson: "MMC core: - Return a proper response in case of an ioctl error - Issue HPI to interrupt BKOPS for eMMC if it timed out - Avoid hogging the CPU while polling for busy - Extend sd8787 pwrseq to support the wilc1000 SDIO - Remove a couple of confusing warning messages - Clarify comment for ->card_busy() host ops MMC host: - dw_mmc: Add data CRC error injection - mmci: De-assert reset during ->probe() - rtsx_pci: Fix long reads when clock is pre-scaled - sdhci: Correct the tuning command handle for PIO mode - sdhci-esdhc-imx: Improve support for auto tuning - sdhci-msm: Add support for the sc7280 - sdhci-of-arasan: Don't auto tune for DDR50 mode for ZynqMP - sdhci-of-arasan: Enable support for auto cmd12 - sdhci-of-arasan: Use 19MHz for SD default speed for ZynqMP for level shifter - usdhi6rol0: Implement the ->card_busy() host ops MEMSTICK: - A couple of minor cleanups" * tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits) mmc: queue: Remove unused parameters(request_queue) mmc: pwrseq: sd8787: fix compilation warning mmc: core: Return correct emmc response in case of ioctl error mmc: sdhci-esdhc-imx: Select the correct mode for auto tuning mmc: sdhci-esdhc-imx: Remove redundant code for manual tuning mmc: core: Issue HPI in case the BKOPS timed out mmc: queue: Match the data type of max_segments mmc: switch from 'pci_' to 'dma_' API memstick: switch from 'pci_' to 'dma_' API memstick: r592: Change the name of the 'pci_driver' structure to be consistent mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787 mmc: pwrseq: sd8787: add support for wilc1000 dt-bindings: mmc: Extend pwrseq-sd8787 binding for wilc1000 dt-bindings: mmc: fsl-imx-esdhc: change the pinctrl-names rule dt-bindings: mmc: fsl-imx-esdhc: add a new compatible string dt-bindings: mmc: renesas,sdhi: Document RZ/G2L bindings dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning mmc: core: Update ->card_busy() callback comment mmc: usdhi6rol0: Implement card_busy function mmc: sdhci: Correct the tuning command handle for PIO mode ...
2021-08-24mmc: block: Support alternative_gpt_sector() operationDmitry Osipenko2-0/+2
Support generic alternative_gpt_sector() block device operation. It calculates location of GPT entry for eMMC of NVIDIA Tegra Android devices. Add new MMC_CAP2_ALT_GPT_TEGRA flag that enables scanning of alternative GPT sector and add raw_boot_mult field to mmc_ext_csd which allows to get size of the boot partitions that is needed for the calculation. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210820004536.15791-4-digetx@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24mmc: core: Update ->card_busy() callback commentMårten Lindahl1-1/+1
According to SD specification checking state of DAT0 only, is enough while polling for card busy completion. Let's update the comment in the header file to correct this, as the comment says DAT[0:3]. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20210816153054.24082-1-marten.lindahl@axis.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-24mmc: core: Store pointer to bio_crypt_ctx in mmc_requestEric Biggers1-2/+1
Make 'struct mmc_request' contain a pointer to the request's 'struct bio_crypt_ctx' directly, instead of extracting a 32-bit DUN from it which is a cqhci-crypto specific detail. This keeps the cqhci crypto specific details in the cqhci module, and it makes mmc_core and mmc_block ready for MMC crypto hardware that accepts the DUN and/or key in a way that is more flexible than that which will be specified by the eMMC v5.2 standard. Exynos SoCs are an example of such hardware, as their inline encryption hardware takes keys directly (it has no concept of keyslots) and supports 128-bit DUNs. Note that the 32-bit DUN length specified by the standard is very restrictive, so it is likely that more hardware will support longer DUNs despite it not following the standard. Thus, limiting the scope of the 32-bit DUN assumption to the place that actually needs it is warranted. Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20210721154738.3966463-1-ebiggers@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-21brcmfmac: add 43752 SDIO ids and initializationAngus Ainslie1-0/+1
Add HW and SDIO ids for use with the SparkLan AP6275S Add the firmware mapping structures for the BRCM43752 chipset. The 43752 needs some things setup similar to the 43012 chipset. The WATERMARK shows better performance when initialized to the 4373 value. Signed-off-by: Angus Ainslie <angus@akkea.ca> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210812165218.2508258-2-angus@akkea.ca
2021-06-14mmc: Improve function name when aborting a tuning cmdWolfram Sang1-1/+1
'mmc_abort_tuning()' made me think tuning gets completely aborted. However, it sends only a STOP cmd to cancel the current tuning cmd. Tuning process may still continue after that. So, rename the function to 'mmc_send_abort_tuning()' to better reflect all this. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210608180620.40059-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14mmc: core: Add support for cache ctrl for SD cardsUlf Hansson1-0/+1
In SD spec v6.x the SD function extension registers for performance enhancements were introduced. As a part of this an optional internal cache on the SD card, can be used to improve performance. The let the SD card use the cache, the host needs to enable it and manage flushing of the cache, so let's add support for this. Note that for an SD card supporting the cache it's mandatory for it, to also support the poweroff notification feature. According to the SD spec, if the cache has been enabled and a poweroff notification is sent to the card, that implicitly also means that the card should flush its internal cache. Therefore, dealing with cache flushing for REQ_OP_FLUSH block requests is sufficient. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20210511101359.83521-1-ulf.hansson@linaro.org
2021-06-14mmc: core: Add support for Power Off Notification for SD cardsUlf Hansson1-0/+1
Rather than only deselecting the SD card via a CMD7, before we cut power to it at system suspend, at runtime suspend or at shutdown, let's add support for a graceful power off sequence via enabling the SD Power Off Notification feature. Note that, the Power Off Notification feature was added in the SD spec v4.x, which is several years ago. However, it's still a bit unclear how often the SD card vendors decides to implement support for it. To validate these changes a Sandisk Extreme PRO A2 64GB has been used, which seems to work nicely. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210504161222.101536-12-ulf.hansson@linaro.org
2021-06-14mmc: core: Read performance enhancements registers for SD cardsUlf Hansson1-0/+7
In SD spec v6.x the SD function extension registers for performance enhancements were introduced. These registers let the SD card announce supports for various performance related features, like "self-maintenance", "cache" and "command queuing". Let's extend the parsing of SD function extension registers and store the information in the struct mmc_card. This prepares for subsequent changes to implement the complete support for new the performance enhancement features. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210504161222.101536-11-ulf.hansson@linaro.org
2021-06-14mmc: core: Read the SD function extension registers for power managementUlf Hansson2-0/+16
In the SD spec v4.0 the CMD48/49 and CMD58/59 were introduced as optional commands. In the SD spec v4.1 the SD function extension registers were introduced, which requires support for CMD48/49/58/59 to be read/written from/to. Moreover, a specific function extension register were added to let the card announce support for optional features in regards to power management. The features that were added are "Power Off Notification", "Power Down Mode" and "Power Sustenance". As a first step to support this, let's read and parse the register for power management during the SD card initialization and store the information about the supported features in the struct mmc_card. In this way, we prepare for subsequent changes to implement the complete support for the new features. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20210504161222.101536-10-ulf.hansson@linaro.org
2021-06-14mmc: core: Parse the SD SCR register for support of CMD48/49 and CMD58/59Ulf Hansson1-0/+2
In SD spec v4.x the support for CMD48/49 and CMD58/59 were introduced as optional features. To let the card announce whether it supports the commands, the SCR register has been extended with corresponding support bits. Let's parse and store this information for later use. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20210504161222.101536-9-ulf.hansson@linaro.org
2021-04-23mmc: core: Convert mmc_of_parse_voltage() to use device property APIAndy Shevchenko1-1/+1
mmc_of_parse() for a few years has been using device property API. Convert mmc_of_parse_voltage() as well. At the same time switch users to new API. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210419112459.25241-2-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: core: Fix hanging on I/O during system suspend for removable cardsUlf Hansson1-3/+0
The mmc core uses a PM notifier to temporarily during system suspend, turn off the card detection mechanism for removal/insertion of (e)MMC/SD/SDIO cards. Additionally, the notifier may be used to remove an SDIO card entirely, if a corresponding SDIO functional driver don't have the system suspend/resume callbacks assigned. This behaviour has been around for a very long time. However, a recent bug report tells us there are problems with this approach. More precisely, when receiving the PM_SUSPEND_PREPARE notification, we may end up hanging on I/O to be completed, thus also preventing the system from getting suspended. In the end what happens, is that the cancel_delayed_work_sync() in mmc_pm_notify() ends up waiting for mmc_rescan() to complete - and since mmc_rescan() wants to claim the host, it needs to wait for the I/O to be completed first. Typically, this problem is triggered in Android, if there is ongoing I/O while the user decides to suspend, resume and then suspend the system again. This due to that after the resume, an mmc_rescan() work gets punted to the workqueue, which job is to verify that the card remains inserted after the system has resumed. To fix this problem, userspace needs to become frozen to suspend the I/O, prior to turning off the card detection mechanism. Therefore, let's drop the PM notifiers for mmc subsystem altogether and rely on the card detection to be turned off/on as a part of the system_freezable_wq, that we are already using. Moreover, to allow and SDIO card to be removed during system suspend, let's manage this from a ->prepare() callback, assigned at the mmc_host_class level. In this way, we can use the parent device (the mmc_host_class device), to remove the card device that is the child, in the device_prepare() phase. Reported-by: Kiwoong Kim <kwmad.kim@samsung.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210310152900.149380-1-ulf.hansson@linaro.org Reviewed-by: Kiwoong Kim <kwmad.kim@samsung.com>
2021-03-30mmc: sdio: fix a typo in the comment of SDIO_SD_REV_3_00Jisheng Zhang1-1/+1
I believe "Spev" is typo, should be "Spec". Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20210311174157.561dada9@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-30mmc: core: Drop reference counting of the bus_opsUlf Hansson1-2/+0
When the mmc_rescan work is enabled for execution (host->rescan_disable), it's the only instance per mmc host that is allowed to set/clear the host->bus_ops pointer. Besides the mmc_rescan work, there are a couple of scenarios when the host->bus_ops pointer may be accessed. Typically, those can be described as as below: *) Upper mmc driver layers (like the mmc block device driver or an SDIO functional driver) needs to execute a host->bus_ops callback. This can be considered as safe without having to use some special locking mechanism, because they operate on top of the struct mmc_card. As long as there is a card to operate upon, the mmc core guarantees that there is a host->bus_ops assigned as well. Note that, upper layer mmc drivers are of course responsible to clean up from themselves from their ->remove() callbacks, otherwise things would fall apart anyways. **) Via the mmc host instance, we may need to force a removal of an inserted mmc card. This happens when a mmc host driver gets unbind, for example. In this case, we protect the host->bus_ops pointer from concurrent accesses, by disabling the mmc_rescan work upfront (host->rescan_disable). See mmc_stop_host() for example. This said, it seems like the reference counting of the host->bus_ops pointer at some point have become superfluous. As this is an old mechanism of the mmc core, it a bit difficult to digest the history of when that could have happened. However, let's drop the reference counting to avoid unnecessary code-paths and lockings. Cc: Pierre Ossman <pierre@ossman.eu> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210212131610.236843-1-ulf.hansson@linaro.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 12:12:49 +0000