| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
freeze and it doesn't reboot by watchdog problem
Before user space daemon start to access the watchdog device,
there is a time interval that watchdog is disabled in the
original flow. If the system freezing at this interval, it
cannot be rebooted by watchdog hardware automatically.
In order to solve this problem, the watchdog hardware should be
kept working, and start hrtimer in framework to ping it by
setting max_hw_heartbeat_ms and HW_RUNNING used in
watchdog_need_worker to determine whether the worker should be
started or not. Besides the redundant setting of max_timeout is
also removed.
Signed-off-by: freddy.hsin <freddy.hsin@mediatek.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1609316157-3748-1-git-send-email-freddy.hsin@mediatek.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
arm64 does not have a grace period after calling reset handlers. It is
rightfully assumed that watchdog drivers should wait because they know
the time needed. Implement this for the Renesas watchdog driver.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@oeck-us.net>
Link: https://lore.kernel.org/r/20210118094558.36814-1-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
In watchdog_reboot_notifier, wdd should be stopped when the device
is in hw_running state
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210114082651.17162-1-qiang.zhao@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Remove including <linux/version.h> that don't need it.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1608886154-55309-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
In the restart handler, we hit multiple OOPSes. One because of
usleep_range() and one because of RPM. So, instead of re-using
rwdt_start(), we implement an atomic version of it in the restart
handler. As a little bonus, reboot will occur sooner because we can now
use the smallest divider in the custom restart routine.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20201219173415.21848-1-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Fix the following coccicheck warnings:
./drivers/watchdog/hpwdt.c:345:2-12: WARNING: Assignment of
0/1 to bool variable.
./drivers/watchdog/hpwdt.c:126:2-12: WARNING: Assignment of
0/1 to bool variable.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Reviewed-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1611128890-79204-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Intel Keembay Soc requires watchdog timer support.
Add watchdog driver to enable this.
Acked-by: Mark Gross <mgross@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/26d74f46ce74488424371dd3e16aa38508fa6c2e.1608141131.git.vijayakannan.ayyathurai@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Defining DEBUG should only be done in development.
So remove DEBUG.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210115153237.131357-1-trix@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is two driver fixes (megaraid_sas and hisi_sas).
The megaraid one is a revert of a previous revert of a cpu hotplug fix
which exposed a bug in the block layer which has been fixed in this
merge window.
The hisi_sas performance enhancement comes from switching to interrupt
managed completion queues, which depended on the addition of
devm_platform_get_irqs_affinity() which is now upstream via the irq
tree in the last merge window"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Expose HW queues for v2 hw
Revert "Revert "scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug""
|
|
Pull block fixes from Jens Axboe:
- Missing CRC32 selections (Arnd)
- Fix for a merge window regression with bdev inode init (Christoph)
- bcache fixes
- rnbd fixes
- NVMe pull request from Christoph:
- fix a race in the nvme-tcp send code (Sagi Grimberg)
- fix a list corruption in an nvme-rdma error path (Israel Rukshin)
- avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar)
- add the susystem NQN quirk for a Samsung driver (Gopal Tiwari)
- fix two compiler warnings in nvme-fcloop (James Smart)
- don't call sleeping functions from irq context in nvme-fc (James Smart)
- remove an unused argument (Max Gurtovoy)
- remove unused exports (Minwoo Im)
- Use-after-free fix for partition iteration (Ming)
- Missing blk-mq debugfs flag annotation (John)
- Bdev freeze regression fix (Satya)
- blk-iocost NULL pointer deref fix (Tejun)
* tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits)
bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET
bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket
bcache: check unsupported feature sets for bcache register
bcache: fix typo from SUUP to SUPP in features.h
bcache: set pdev_set_uuid before scond loop iteration
blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED
block/rnbd-clt: avoid module unload race with close confirmation
block/rnbd: Adding name to the Contributors List
block/rnbd-clt: Fix sg table use after free
block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close
block/rnbd: Select SG_POOL for RNBD_CLIENT
block: pre-initialize struct block_device in bdev_alloc_inode
fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb
nvme: remove the unused status argument from nvme_trace_bio_complete
nvmet-rdma: Fix list_del corruption on queue establishment failure
nvme: unexport functions with no external caller
nvme: avoid possible double fetch in handling CQE
nvme-tcp: Fix possible race of io_work and direct send
nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN
nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.11-rc3.
Include in here are:
- USB gadget driver fixes for reported issues
- new usb-serial driver ids
- dma from stack bugfixes
- typec bugfixes
- dwc3 bugfixes
- xhci driver bugfixes
- other small misc usb driver bugfixes
All of these have been in linux-next with no reported issues"
* tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
usb: dwc3: gadget: Clear wait flag on dequeue
usb: typec: Send uevent for num_altmodes update
usb: typec: Fix copy paste error for NVIDIA alt-mode description
usb: gadget: enable super speed plus
kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb
usb: uas: Add PNY USB Portable SSD to unusual_uas
usb: gadget: configfs: Preserve function ordering after bind failure
usb: gadget: select CONFIG_CRC32
usb: gadget: core: change the comment for usb_gadget_connect
usb: gadget: configfs: Fix use-after-free issue with udc_name
usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup
usb: usbip: vhci_hcd: protect shift size
USB: usblp: fix DMA to stack
USB: serial: iuu_phoenix: fix DMA from stack
USB: serial: option: add LongSung M5710 module support
USB: serial: option: add Quectel EM160R-GL
USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug
usb: gadget: f_uac2: reset wMaxPacketSize
usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression
usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for 5.11-rc3. Nothing major,
just resolving some reported issues:
- cleanup some remaining mentions of the ION drivers that were
removed in 5.11-rc1
- comedi driver bugfix
- two error path memory leak fixes
All have been in linux-next for a while with no reported issues"
* tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: ION: remove some references to CONFIG_ION
staging: mt7621-dma: Fix a resource leak in an error handling path
Staging: comedi: Return -EFAULT if copy_to_user() fails
staging: spmi: hisi-spmi-controller: Fix some error handling paths
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.11-rc3.
The majority here are fixes for the habanalabs drivers, but also in
here are:
- crypto driver fix
- pvpanic driver fix
- updated font file
- interconnect driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
Fonts: font_ter16x32: Update font with new upstream Terminus release
misc: pvpanic: Check devm_ioport_map() for NULL
speakup: Add github repository URL and bug tracker
MAINTAINERS: Update Georgi's email address
crypto: asym_tpm: correct zero out potential secrets
habanalabs: Fix memleak in hl_device_reset
interconnect: imx8mq: Use icc_sync_state
interconnect: imx: Remove a useless test
interconnect: imx: Add a missing of_node_put after of_device_is_available
interconnect: qcom: fix rpmh link failures
habanalabs: fix order of status check
habanalabs: register to pci shutdown callback
habanalabs: add validation cs counter, fix misplaced counters
habanalabs/gaudi: retry loading TPC f/w on -EINTR
habanalabs: adjust pci controller init to new firmware
habanalabs: update comment in hl_boot_if.h
habanalabs/gaudi: enhance reset message
habanalabs: full FW hard reset support
habanalabs/gaudi: disable CGM at HW initialization
habanalabs: Revise comment to align with mirror list name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix possible KASAN issue in amd_energy driver
- Avoid configuration problem in pwm-fan driver
- Fix kernel-doc warning in sbtsi_temp documentation
* tag 'hwmon-for-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (amd_energy) fix allocation of hwmon_channel_info config
hwmon: (pwm-fan) Ensure that calculation doesn't discard big period values
hwmon: (sbtsi_temp) Fix Documenation kernel-doc warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A bunch of dmaengine driver fixes for:
- coverity discovered issues for xilinx driver
- qcom, gpi driver fix for undefined bhaviour and one off cleanup
- update Peter's email for TI DMA drivers
- one-off for idxd driver
- resource leak fix for mediatek and milbeaut drivers"
* tag 'dmaengine-fix-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: stm32-mdma: fix STM32_MDMA_VERY_HIGH_PRIORITY value
dmaengine: xilinx_dma: fix mixed_enum_type coverity warning
dmaengine: xilinx_dma: fix incompatible param warning in _child_probe()
dmaengine: xilinx_dma: check dma_async_device_register return value
dmaengine: qcom: fix gpi undefined behavior
dt-bindings: dma: ti: Update maintainer and author information
MAINTAINERS: Add entry for Texas Instruments DMA drivers
qcom: bam_dma: Delete useless kfree code
dmaengine: dw-edma: Fix use after free in dw_edma_alloc_chunk()
dmaengine: milbeaut-xdmac: Fix a resource leak in the error handling path of the probe function
dmaengine: mediatek: mtk-hsdma: Fix a resource leak in the error handling path of the probe function
dmaengine: qcom: gpi: Fixes a format mismatch
dmaengine: idxd: off by one in cleanup code
dmaengine: ti: k3-udma: Fix pktdma rchan TPL level setup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Three driver bugfixes for I2C. Buisness as usual"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mediatek: Fix apdma and i2c hand-shake timeout
i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminated
i2c: sprd: use a specific timeout to avoid system hang up issue
|
|
BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET
If BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET is set in incompat feature
set, it means the cache device is created with obsoleted layout with
obso_bucket_site_hi. Now bcache does not support this feature bit, a new
BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE incompat feature bit is added
for a better layout to support large bucket size.
For the legacy compatibility purpose, if a cache device created with
obsoleted BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit, all bcache
devices attached to this cache set should be set to read-only. Then the
dirty data can be written back to backing device before re-create the
cache device with BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE feature bit
by the latest bcache-tools.
This patch checks BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit
when running a cache set and attach a bcache device to the cache set. If
this bit is set,
- When run a cache set, print an error kernel message to indicate all
following attached bcache device will be read-only.
- When attach a bcache device, print an error kernel message to indicate
the attached bcache device will be read-only, and ask users to update
to latest bcache-tools.
Such change is only for cache device whose bucket size >= 32MB, this is
for the zoned SSD and almost nobody uses such large bucket size at this
moment. If you don't explicit set a large bucket size for a zoned SSD,
such change is totally transparent to your bcache device.
Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When large bucket feature was added, BCH_FEATURE_INCOMPAT_LARGE_BUCKET
was introduced into the incompat feature set. It used bucket_size_hi
(which was added at the tail of struct cache_sb_disk) to extend current
16bit bucket size to 32bit with existing bucket_size in struct
cache_sb_disk.
This is not a good idea, there are two obvious problems,
- Bucket size is always value power of 2, if store log2(bucket size) in
existing bucket_size of struct cache_sb_disk, it is unnecessary to add
bucket_size_hi.
- Macro csum_set() assumes d[SB_JOURNAL_BUCKETS] is the last member in
struct cache_sb_disk, bucket_size_hi was added after d[] which makes
csum_set calculate an unexpected super block checksum.
To fix the above problems, this patch introduces a new incompat feature
bit BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE, when this bit is set, it
means bucket_size in struct cache_sb_disk stores the order of power-of-2
bucket size value. When user specifies a bucket size larger than 32768
sectors, BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE will be set to
incompat feature set, and bucket_size stores log2(bucket size) more
than store the real bucket size value.
The obsoleted BCH_FEATURE_INCOMPAT_LARGE_BUCKET won't be used anymore,
it is renamed to BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET and still only
recognized by kernel driver for legacy compatible purpose. The previous
bucket_size_hi is renmaed to obso_bucket_size_hi in struct cache_sb_disk
and not used in bcache-tools anymore.
For cache device created with BCH_FEATURE_INCOMPAT_LARGE_BUCKET feature,
bcache-tools and kernel driver still recognize the feature string and
display it as "obso_large_bucket".
With this change, the unnecessary extra space extend of bcache on-disk
super block can be avoided, and csum_set() may generate expected check
sum as well.
Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch adds the check for features which is incompatible for
current supported feature sets.
Now if the bcache device created by bcache-tools has features that
current kernel doesn't support, read_super() will fail with error
messoage. E.g. if an unsupported incompatible feature detected,
bcache register will fail with dmesg "bcache: register_bcache() error :
Unsupported incompatible feature found".
Fixes: d721a43ff69c ("bcache: increase super block version for cache device and backing device")
Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch fixes the following typos,
from BCH_FEATURE_COMPAT_SUUP to BCH_FEATURE_COMPAT_SUPP
from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_INCOMPAT_SUPP
from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_RO_COMPAT_SUPP
Fixes: d721a43ff69c ("bcache: increase super block version for cache device and backing device")
Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no need to reassign pdev_set_uuid in the second loop iteration,
so move it to the place before second loop.
Signed-off-by: Yi Li <yili@winhong.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework fixes from Rafael Wysocki:
"Revert a problematic commit that went in during the 5.10 cycle and
improve the kerneldoc description of the function affected by it (both
changes from Bard Liao)"
* tag 'devprop-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: add description of fwnode cases
Revert "device property: Keep secondary firmware node secondary by type"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These address two build issues and drop confusing text from a couple
of Kconfig entries.
Specifics:
- Drop two local variables that are never read and the code updating
their values from the x86 suspend-to-idle code (Rafael Wysocki)
- Add empty stub of an ACPI helper function to avoid build issues
when CONFIG_ACPI is not set (Shawn Guo)
- Remove confusing text regarding modules from Kconfig entries that
correspond to non-modular code (Peter Robinson)"
* tag 'acpi-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Update Kconfig help text for items that are no longer modular
ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI
ACPI: PM: s2idle: Drop unused local variables and related code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address two issues in the intel_pstate driver and one in the
powernow-k8 cpufreq driver.
Specifics:
- Make the powernow-k8 cpufreq driver avoid calling
cpufreq_cpu_get(), which theoretically may return NULL, to get a
policy pointer that is known to it already (Colin Ian King)
- Drop two functions that are not used any more from the intel_pstate
driver (Lukas Bulwahn)
- Make intel_pstate check the HWP capabilities to get the maximum
available P-state in the passive mode to avoid using a stale value
of it in case of out-of-band updates (Rafael Wysocki)"
* tag 'pm-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: remove obsolete functions
cpufreq: powernow-k8: pass policy rather than use cpufreq_cpu_get()
cpufreq: intel_pstate: Use HWP capabilities in intel_cpufreq_adjust_perf()
|
|
Pull drm fixes from Daniel Vetter:
"Looks like people are back from the break, usual small pile of fixes
all over. Next week Dave should be back.
The only thing pending I'm aware of is a "this shouldn't have become
uapi" reverts for amdgpu, but they're already on the list and not that
important really so can wait another week.
Summary:
- fix for ttm list corruption in radeon, reported by a few people
- fixes for amdgpu, i915, msm
- dma-buf use-after free fix"
* tag 'drm-fixes-2021-01-08' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/msm: Only enable A6xx LLCC code on A6xx
drm/msm: Add modparam to allow vram carveout
drm/msm: Call msm_init_vram before binding the gpu
drm/msm/dp: postpone irq_hpd event during connection pending state
drm/ttm: unexport ttm_pool_init/fini
drm/radeon: stop re-init the TTM page pool
dmabuf: fix use-after-free of dmabuf's file->f_inode
Revert "drm/amd/display: Fix memory leaks in S3 resume"
drm/amdgpu/display: drop DCN support for aarch64
drm/amdgpu: enable ras eeprom support for sienna cichlid
drm/amdgpu: fix no bad_pages issue after umc ue injection
drm/amdgpu: fix potential memory leak during navi12 deinitialization
drm/amd/display: Fix unused variable warning
drm/amd/pm: improve the fine grain tuning function for RV/RV2/PCO
drm/amd/pm: fix the failure when change power profile for renoir
drm/amdgpu: fix a GPU hang issue when remove device
drm/amdgpu: fix a memory protection fault when remove amdgpu device
drm/amdgpu: switched to cached noretry setting for vangogh
drm/amd/display: fix sysfs amdgpu_current_backlight_pwm NULL pointer issue
drm/amd/pm: updated PM to I2C controller port on sienna cichlid
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull iommu fixes from Will Deacon:
"This is mainly all Intel VT-D stuff, but there are some fixes for AMD
and ARM as well.
We've also got the revert I promised during the merge window, which
removes a temporary hack to accomodate i915 while we transitioned the
Intel IOMMU driver over to the common DMA-IOMMU API.
Finally, there are still a couple of other VT-D fixes floating around,
so I expect to send you another batch of fixes next week.
Summary:
- Fix VT-D TLB invalidation for subdevices
- Fix VT-D use-after-free on subdevice detach
- Fix VT-D locking so that IRQs are disabled during SVA bind/unbind
- Fix VT-D address alignment when flushing IOTLB
- Fix memory leak in VT-D IRQ remapping failure path
- Revert temporary i915 sglist hack now that it is no longer required
- Fix sporadic boot failure with Arm SMMU on Qualcomm SM8150
- Fix NULL dereference in AMD IRQ remapping code with remapping disabled
- Fix accidental enabling of irqs on AMD resume-from-suspend path
- Fix some typos in comments"
* tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
iommu/vt-d: Fix ineffective devTLB invalidation for subdevices
iommu/vt-d: Fix general protection fault in aux_detach_device()
iommu/vt-d: Move intel_iommu info from struct intel_svm to struct intel_svm_dev
iommu/arm-smmu-qcom: Initialize SCTLR of the bypass context
iommu/vt-d: Fix lockdep splat in sva bind()/unbind()
Revert "iommu: Add quirk for Intel graphic devices in map_sg"
iommu/vt-d: Fix misuse of ALIGN in qi_flush_piotlb()
iommu/amd: Stop irq_remapping_select() matching when remapping is disabled
iommu/amd: Set iommu->int_enabled consistently when interrupts are set up
iommu/intel: Fix memleak in intel_irq_remapping_alloc
iommu/iova: fix 'domain' typos
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking fixes from Jakub Kicinski:
"Slightly lighter pull request to get back into the Thursday cadence.
Current release - always broken:
- can: mcp251xfd: fix Tx/Rx ring buffer driver race conditions
- dsa: hellcreek: fix led_classdev build errors
Previous releases - regressions:
- ipv6: fib: flush exceptions when purging route to avoid netdev
reference leak
- ip_tunnels: fix pmtu check in nopmtudisc mode
- ip: always refragment ip defragmented packets to avoid MTU issues
when forwarding through tunnels, correct "packet too big" message
is prohibitively tricky to generate
- s390/qeth: fix locking for discipline setup / removal and during
recovery to prevent both deadlocks and races
- mlx5: Use port_num 1 instead of 0 when delete a RoCE address
Previous releases - always broken:
- cdc_ncm: correct overhead calculation in delayed_ndp_size to
prevent out of bound accesses with Huawei 909s-120 LTE module
- fix stmmac dwmac-sun8i suspend/resume:
- PHY being left powered off
- MAC syscon configuration being reset
- reference to the reset controller being improperly dropped
- qrtr: fix null-ptr-deref in qrtr_ns_remove
- can: tcan4x5x: fix bittiming const, use common bittiming from m_can
driver
- mlx5e: CT: Use per flow counter when CT flow accounting is enabled
- mlx5e: Fix SWP offsets when vlan inserted by driver
Misc:
- bpf: Fix a task_iter bug caused by a bpf -> net merge conflict
resolution
And the usual many fixes to various error paths"
* tag 'net-5.11-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbE
s390/qeth: fix L2 header access in qeth_l3_osa_features_check()
s390/qeth: fix locking for discipline setup / removal
s390/qeth: fix deadlock during recovery
selftests: fib_nexthops: Fix wrong mausezahn invocation
nexthop: Bounce NHA_GATEWAY in FDB nexthop groups
nexthop: Unlink nexthop group entry in error path
nexthop: Fix off-by-one error in error path
octeontx2-af: fix memory leak of lmac and lmac->name
chtls: Fix chtls resources release sequence
chtls: Added a check to avoid NULL pointer dereference
chtls: Replace skb_dequeue with skb_peek
chtls: Avoid unnecessary freeing of oreq pointer
chtls: Fix panic when route to peer not configured
chtls: Remove invalid set_tcb call
chtls: Fix hardware tid leak
net: ip: always refragment ip defragmented packets
net: fix pmtu check in nopmtudisc mode
selftests: netfilter: add selftest for ipip pmtu discovery with enabled connection tracking
docs: octeontx2: tune rst markup
...
|
|
This reverts commit 757055ae8dedf5333af17b3b5b4b70ba9bc9da4e.
The commit caused that ttynull was used as the default console
on several systems[1][2][3]. As a result, the console was
blank even when a better alternative existed.
It happened when there was no console configured
on the command line and ttynull_init() was the first initcall
calling register_console().
Or it happened when /dev/ did not exist when console_on_rootfs()
was called. It was not able to open /dev/console even though
a console driver was registered. It tried to add ttynull console
but it obviously did not help. But ttynull became the preferred
console and was used by /dev/console when it was available later.
The commit tried to fix a historical problem that have been there
for ages. The primary motivation was the commit 3cffa06aeef7ece30f6
("printk/console: Allow to disable console output by using console=""
or console=null"). It provided a clean solution for a workaround
that was widely used and worked only by chance.
This revert causes that the console="" or console=null command line
options will again work only by chance. These options will cause that
a particular console will be preferred and the default (tty) ones
will not get enabled. There will be no console registered at
all. As a result there won't be stdin, stdout, and stderr for
the init process. But it worked exactly this way even before.
The proper solution has to fulfill many conditions:
+ Register ttynull only when explicitly required or as
the ultimate fallback.
+ ttynull should get associated with /dev/console but it must
not become preferred console when used as a fallback.
Especially, it must still be possible to replace it
by a better console later.
Such a change requires clean up of the register_console() code.
Otherwise, it would be even harder to follow. Especially, the use
of has_preferred_console and CON_CONSDEV flag is tricky. The clean
up is risky. The ordering of consoles is not well defined. And
any changes tend to break existing user settings.
Do the revert at the least risky solution for now.
[1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/
[2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/
[3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Vineet Gupta <vgupta@synopsys.com>
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* acpi-scan:
ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI
* acpi-misc:
ACPI: Update Kconfig help text for items that are no longer modular
|
|
hwmon, specifically hwmon_num_channel_attrs, expects the config
array in the hwmon_channel_info structure to be terminated by
a zero entry. amd_energy does not honor this convention. As
result, a KASAN warning is possible. Fix this by adding an
additional entry and setting it to zero.
Fixes: 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters")
Signed-off-by: David Arcari <darcari@redhat.com>
Cc: Naveen Krishna Chatradhi <nchatrad@amd.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: David Arcari <darcari@redhat.com>
Acked-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20210107144707.6927-1-darcari@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
We had kernel panic, it is caused by unload module and last
close confirmation.
call trace:
[1196029.743127] free_sess+0x15/0x50 [rtrs_client]
[1196029.743128] rtrs_clt_close+0x4c/0x70 [rtrs_client]
[1196029.743129] ? rnbd_clt_unmap_device+0x1b0/0x1b0 [rnbd_client]
[1196029.743130] close_rtrs+0x25/0x50 [rnbd_client]
[1196029.743131] rnbd_client_exit+0x93/0xb99 [rnbd_client]
[1196029.743132] __x64_sys_delete_module+0x190/0x260
And in the crashdump confirmation kworker is also running.
PID: 6943 TASK: ffff9e2ac8098000 CPU: 4 COMMAND: "kworker/4:2"
#0 [ffffb206cf337c30] __schedule at ffffffff9f93f891
#1 [ffffb206cf337cc8] schedule at ffffffff9f93fe98
#2 [ffffb206cf337cd0] schedule_timeout at ffffffff9f943938
#3 [ffffb206cf337d50] wait_for_completion at ffffffff9f9410a7
#4 [ffffb206cf337da0] __flush_work at ffffffff9f08ce0e
#5 [ffffb206cf337e20] rtrs_clt_close_conns at ffffffffc0d5f668 [rtrs_client]
#6 [ffffb206cf337e48] rtrs_clt_close at ffffffffc0d5f801 [rtrs_client]
#7 [ffffb206cf337e68] close_rtrs at ffffffffc0d26255 [rnbd_client]
#8 [ffffb206cf337e78] free_sess at ffffffffc0d262ad [rnbd_client]
#9 [ffffb206cf337e88] rnbd_clt_put_dev at ffffffffc0d266a7 [rnbd_client]
The problem is both code path try to close same session, which lead to
panic.
To fix it, just skip the sess if the refcount already drop to 0.
Fixes: f7a7a5c228d4 ("block/rnbd: client: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Adding name to the Contributors List
Signed-off-by: Swapnil Ingle <ingleswapnil@gmail.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Acked-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since dynamically allocate sglist is used for rnbd_iu, we can't free sg
table after send_usr_msg since the callback function (cqe.done) could
still access the sglist.
Otherwise KASAN reports UAF issue:
[ 4856.600257] BUG: KASAN: use-after-free in dma_direct_unmap_sg+0x53/0x290
[ 4856.600772] Read of size 4 at addr ffff888206af3a98 by task swapper/1/0
[ 4856.601729] CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G W 5.10.0-pserver #5.10.0-1+feature+linux+next+20201214.1025+0910d71
[ 4856.601748] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 3.3 02/21/2020
[ 4856.601766] Call Trace:
[ 4856.601785] <IRQ>
[ 4856.601822] dump_stack+0x99/0xcb
[ 4856.601856] ? dma_direct_unmap_sg+0x53/0x290
[ 4856.601888] print_address_description.constprop.7+0x1e/0x230
[ 4856.601913] ? freeze_kernel_threads+0x73/0x73
[ 4856.601965] ? mark_held_locks+0x29/0xa0
[ 4856.602019] ? dma_direct_unmap_sg+0x53/0x290
[ 4856.602039] ? dma_direct_unmap_sg+0x53/0x290
[ 4856.602079] kasan_report.cold.9+0x37/0x7c
[ 4856.602188] ? mlx5_ib_post_recv+0x430/0x520 [mlx5_ib]
[ 4856.602209] ? dma_direct_unmap_sg+0x53/0x290
[ 4856.602256] dma_direct_unmap_sg+0x53/0x290
[ 4856.602366] complete_rdma_req+0x188/0x4b0 [rtrs_client]
[ 4856.602451] ? rtrs_clt_close+0x80/0x80 [rtrs_client]
[ 4856.602535] ? mlx5_ib_poll_cq+0x48b/0x16e0 [mlx5_ib]
[ 4856.602589] ? radix_tree_insert+0x3a0/0x3a0
[ 4856.602610] ? do_raw_spin_lock+0x119/0x1d0
[ 4856.602647] ? rwlock_bug.part.1+0x60/0x60
[ 4856.602740] rtrs_clt_rdma_done+0x3f7/0x670 [rtrs_client]
[ 4856.602804] ? rtrs_clt_rdma_cm_handler+0xda0/0xda0 [rtrs_client]
[ 4856.602857] ? check_flags.part.31+0x6c/0x1f0
[ 4856.602927] ? rcu_read_lock_sched_held+0xaf/0xe0
[ 4856.602963] ? rcu_read_lock_bh_held+0xc0/0xc0
[ 4856.603137] __ib_process_cq+0x10a/0x350 [ib_core]
[ 4856.603309] ib_poll_handler+0x41/0x1c0 [ib_core]
[ 4856.603358] irq_poll_softirq+0xe6/0x280
[ 4856.603392] ? lockdep_hardirqs_on_prepare+0x111/0x210
[ 4856.603446] __do_softirq+0x10d/0x646
[ 4856.603540] asm_call_irq_on_stack+0x12/0x20
[ 4856.603563] </IRQ>
[ 4856.605096] Allocated by task 8914:
[ 4856.605510] kasan_save_stack+0x19/0x40
[ 4856.605532] __kasan_kmalloc.constprop.7+0xc1/0xd0
[ 4856.605552] __kmalloc+0x155/0x320
[ 4856.605574] __sg_alloc_table+0x155/0x1c0
[ 4856.605594] sg_alloc_table+0x1f/0x50
[ 4856.605620] send_msg_sess_info+0x119/0x2e0 [rnbd_client]
[ 4856.605646] remap_devs+0x71/0x210 [rnbd_client]
[ 4856.605676] init_sess+0xad8/0xe10 [rtrs_client]
[ 4856.605706] rtrs_clt_reconnect_work+0xd6/0x170 [rtrs_client]
[ 4856.605728] process_one_work+0x521/0xa90
[ 4856.605748] worker_thread+0x65/0x5b0
[ 4856.605769] kthread+0x1f2/0x210
[ 4856.605789] ret_from_fork+0x22/0x30
[ 4856.606159] Freed by task 8914:
[ 4856.606559] kasan_save_stack+0x19/0x40
[ 4856.606580] kasan_set_track+0x1c/0x30
[ 4856.606601] kasan_set_free_info+0x1b/0x30
[ 4856.606622] __kasan_slab_free+0x108/0x150
[ 4856.606642] slab_free_freelist_hook+0x64/0x190
[ 4856.606661] kfree+0xe2/0x650
[ 4856.606681] __sg_free_table+0xa4/0x100
[ 4856.606707] send_msg_sess_info+0x1d6/0x2e0 [rnbd_client]
[ 4856.606733] remap_devs+0x71/0x210 [rnbd_client]
[ 4856.606763] init_sess+0xad8/0xe10 [rtrs_client]
[ 4856.606792] rtrs_clt_reconnect_work+0xd6/0x170 [rtrs_client]
[ 4856.606813] process_one_work+0x521/0xa90
[ 4856.606833] worker_thread+0x65/0x5b0
[ 4856.606853] kthread+0x1f2/0x210
[ 4856.606872] ret_from_fork+0x22/0x30
The solution is to free iu's sgtable after the iu is not used anymore.
And also move sg_alloc_table into rnbd_get_iu accordingly.
Fixes: 5a1328d0c3a7 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu")
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
KASAN detect following BUG:
[ 778.215311] ==================================================================
[ 778.216696] BUG: KASAN: use-after-free in rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server]
[ 778.219037] Read of size 8 at addr ffff88b1d6516c28 by task tee/8842
[ 778.220500] CPU: 37 PID: 8842 Comm: tee Kdump: loaded Not tainted 5.10.0-pserver #5.10.0-1+feature+linux+next+20201214.1025+0910d71
[ 778.220529] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 3.3 02/21/2020
[ 778.220555] Call Trace:
[ 778.220609] dump_stack+0x99/0xcb
[ 778.220667] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server]
[ 778.220715] print_address_description.constprop.7+0x1e/0x230
[ 778.220750] ? freeze_kernel_threads+0x73/0x73
[ 778.220896] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server]
[ 778.220932] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server]
[ 778.220994] kasan_report.cold.9+0x37/0x7c
[ 778.221066] ? kobject_put+0x80/0x270
[ 778.221102] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server]
[ 778.221184] rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server]
[ 778.221240] rnbd_srv_dev_session_force_close_store+0x6a/0xc0 [rnbd_server]
[ 778.221304] ? sysfs_file_ops+0x90/0x90
[ 778.221353] kernfs_fop_write+0x141/0x240
[ 778.221451] vfs_write+0x142/0x4d0
[ 778.221553] ksys_write+0xc0/0x160
[ 778.221602] ? __ia32_sys_read+0x50/0x50
[ 778.221684] ? lockdep_hardirqs_on_prepare+0x13d/0x210
[ 778.221718] ? syscall_enter_from_user_mode+0x1c/0x50
[ 778.221821] do_syscall_64+0x33/0x40
[ 778.221862] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 778.221896] RIP: 0033:0x7f4affdd9504
[ 778.221928] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 f9 61 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53
[ 778.221956] RSP: 002b:00007fffebb36b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 778.222011] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f4affdd9504
[ 778.222038] RDX: 0000000000000002 RSI: 00007fffebb36c50 RDI: 0000000000000003
[ 778.222066] RBP: 00007fffebb36c50 R08: 0000556a151aa600 R09: 00007f4affeb1540
[ 778.222094] R10: fffffffffffffc19 R11: 0000000000000246 R12: 0000556a151aa520
[ 778.222121] R13: 0000000000000002 R14: 00007f4affea6760 R15: 0000000000000002
[ 778.222764] Allocated by task 3212:
[ 778.223285] kasan_save_stack+0x19/0x40
[ 778.223316] __kasan_kmalloc.constprop.7+0xc1/0xd0
[ 778.223347] kmem_cache_alloc_trace+0x186/0x350
[ 778.223382] rnbd_srv_rdma_ev+0xf16/0x1690 [rnbd_server]
[ 778.223422] process_io_req+0x4d1/0x670 [rtrs_server]
[ 778.223573] __ib_process_cq+0x10a/0x350 [ib_core]
[ 778.223709] ib_cq_poll_work+0x31/0xb0 [ib_core]
[ 778.223743] process_one_work+0x521/0xa90
[ 778.223773] worker_thread+0x65/0x5b0
[ 778.223802] kthread+0x1f2/0x210
[ 778.223833] ret_from_fork+0x22/0x30
[ 778.224296] Freed by task 8842:
[ 778.224800] kasan_save_stack+0x19/0x40
[ 778.224829] kasan_set_track+0x1c/0x30
[ 778.224860] kasan_set_free_info+0x1b/0x30
[ 778.224889] __kasan_slab_free+0x108/0x150
[ 778.224919] slab_free_freelist_hook+0x64/0x190
[ 778.224947] kfree+0xe2/0x650
[ 778.224982] rnbd_destroy_sess_dev+0x2fa/0x3b0 [rnbd_server]
[ 778.225011] kobject_put+0xda/0x270
[ 778.225046] rnbd_srv_sess_dev_force_close+0x30/0x60 [rnbd_server]
[ 778.225081] rnbd_srv_dev_session_force_close_store+0x6a/0xc0 [rnbd_server]
[ 778.225111] kernfs_fop_write+0x141/0x240
[ 778.225140] vfs_write+0x142/0x4d0
[ 778.225169] ksys_write+0xc0/0x160
[ 778.225198] do_syscall_64+0x33/0x40
[ 778.225227] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 778.226506] The buggy address belongs to the object at ffff88b1d6516c00
which belongs to the cache kmalloc-512 of size 512
[ 778.227464] The buggy address is located 40 bytes inside of
512-byte region [ffff88b1d6516c00, ffff88b1d6516e00)
The problem is in the sess_dev release function we call
rnbd_destroy_sess_dev, and could free the sess_dev already, but we still
set the keep_id in rnbd_srv_sess_dev_force_close, which lead to use
after free.
To fix it, move the keep_id before the sysfs removal, and cache the
rnbd_srv_session for lock accessing,
Fixes: 786998050cbc ("block/rnbd-srv: close a mapped device from server side.")
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
lkp reboot following build error:
drivers/block/rnbd/rnbd-clt.c: In function 'rnbd_softirq_done_fn':
>> drivers/block/rnbd/rnbd-clt.c:387:2: error: implicit declaration of function 'sg_free_table_chained' [-Werror=implicit-function-declaration]
387 | sg_free_table_chained(&iu->sgt, RNBD_INLINE_SG_CNT);
| ^~~~~~~~~~~~~~~~~~~~~
The reason is CONFIG_SG_POOL is not enabled in the config, to
avoid such failure, select SG_POOL in Kconfig for RNBD_CLIENT.
Fixes: 5a1328d0c3a7 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* dma-buf: fix a use-after-free
* radeon: don't init the TTM page pool manually
* ttm: unexport ttm_pool_{init,fini}()
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/X/gnKs52t8xUuAlE@linux-uq9g
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
A few misc fixes from Rob, mostly fallout from the locking rework that
landed in the merge window, plus a few smaller things.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtWMhzyD6kejmViZeZ+zfJxRvfq-R2t_zA+DcDiTxsYRQ@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-01-07
* tag 'mlx5-fixes-2021-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups
net/mlx5e: Fix two double free cases
net/mlx5: Release devlink object if adev fails
net/mlx5e: ethtool, Fix restriction of autoneg with 56G
net/mlx5e: In skb build skip setting mark in switchdev mode
net/mlx5: E-Switch, fix changing vf VLANID
net/mlx5e: Fix SWP offsets when vlan inserted by driver
net/mlx5e: CT: Use per flow counter when CT flow accounting is enabled
net/mlx5: Use port_num 1 instead of 0 when delete a RoCE address
net/mlx5e: Add missing capability check for uplink follow
net/mlx5: Check if lag is supported before creating one
====================
Link: https://lore.kernel.org/r/20210107202845.470205-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Exclude RMII from modes that report 1 GbE support. Reduced MII supports
up to 100 MbE.
Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210107195818.3878-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip_finish_output_gso() may call .ndo_features_check() even before the
skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt
to inspect the L2 header via vlan_eth_hdr().
Switch to vlan_get_protocol(), as already used further down in the
common qeth_features_check() path.
Fixes: f13ade199391 ("s390/qeth: run non-offload L3 traffic over common xmit path")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Due to insufficient locking, qeth_core_set_online() and
qeth_dev_layer2_store() can run in parallel, both attempting to load &
setup the discipline (and stepping on each other toes along the way).
A similar race can also occur between qeth_core_remove_device() and
qeth_dev_layer2_store().
Access to .discipline is meant to be protected by the discipline_mutex,
so add/expand the locking in qeth_core_remove_device() and
qeth_core_set_online().
Adjust the locking in qeth_l*_remove_device() accordingly, as it's now
handled by the callers in a consistent manner.
Based on an initial patch by Ursula Braun.
Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When qeth_dev_layer2_store() - holding the discipline_mutex - waits
inside qeth_l*_remove_device() for a qeth_do_reset() thread to complete,
we can hit a deadlock if qeth_do_reset() concurrently calls
qeth_set_online() and thus tries to aquire the discipline_mutex.
Move the discipline_mutex locking outside of qeth_set_online() and
qeth_set_offline(), and turn the discipline into a parameter so that
callers understand the dependency.
To fix the deadlock, we can now relax the locking:
As already established, qeth_l*_remove_device() waits for
qeth_do_reset() to complete. So qeth_do_reset() itself is under no risk
of having card->discipline ripped out while it's running, and thus
doesn't need to take the discipline_mutex.
Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the error return paths don't kfree lmac and lmac->name
leading to some memory leaks. Fix this by adding two error return
paths that kfree these objects
Addresses-Coverity: ("Resource leak")
Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210107123916.189748-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CPL_ABORT_RPL is sent after releasing the resources by calling
chtls_release_resources(sk); and chtls_conn_done(sk);
eventually causing kernel panic. Fixing it by calling release
in appropriate order.
Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of server removal lookup_stid() may return NULL pointer, which
is used as listen_ctx. So added a check before accessing this pointer.
Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The skb is unlinked twice, one in __skb_dequeue in function
chtls_reset_synq() and another in cleanup_syn_rcv_conn().
So in this patch using skb_peek() instead of __skb_dequeue(),
so that unlink will be handled only in cleanup_syn_rcv_conn().
Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In chtls_pass_accept_request(), removing the chtls_reqsk_free()
call to avoid oreq freeing twice. Here oreq is the pointer to
struct request_sock.
Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If route to peer is not configured, we might get non tls
devices from dst_neigh_lookup() which is invalid, adding a
check to avoid it.
Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At the time of SYN_RECV, connection information is not
initialized at FW, updating tcb flag over uninitialized
connection causes adapter crash. We don't need to
update the flag during SYN_RECV state, so avoid this.
Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
send_abort_rpl() is not calculating cpl_abort_req_rss offset and
ends up sending wrong TID with abort_rpl WR causng tid leaks.
Replaced send_abort_rpl() with chtls_send_abort_rpl() as it is
redundant.
Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
