summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2006-09-22RDMA: iWARP Connection Manager.Tom Tucker2-0/+1081
Add an iWARP Connection Manager (CM), which abstracts connection management for iWARP devices (RNICs). It is a logical instance of the xx_cm where xx is the transport type (ib or iw). The symbols exported are used by the transport independent rdma_cm module, and are available also for transport dependent ULPs. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB: Whitespace fixesRoland Dreier15-33/+31
Remove some trailing whitespace that has snuck in despite the best efforts of whitespace=error-all. Also fix a few other whitespace bogosities. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/cm: Randomize starting comm IDSean Hefty1-8/+16
Randomize the starting local comm ID to avoid getting a rejected connection due to a stale connection after a system reboot or reloading of the ib_cm. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/mad: Remove unused includesJames Lentini2-3/+0
The ib_mad module does not use a kthread function, but mad_priv.h includes <linux/kthread.h>. mad_rmpp.c does not do any DMA-related stuff, but includes <linux/dma-mapping.h>. Remove the unused includes. Signed-off-by: James Lentini <jlentini@netapp.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/mad: Add support for dual-sided RMPP transfers.Sean Hefty1-3/+87
The implementation assumes that any RMPP request that requires a response uses DS RMPP. Based on the RMPP start-up scenarios defined by the spec, this should be a valid assumption. That is, there is no start-up scenario defined where an RMPP request is followed by a non-RMPP response. By having this assumption we avoid any API changes. In order for a node that supports DS RMPP to communicate with one that does not, RMPP responses assume a new window size of 1 if a DS ACK has not been received. (By DS ACK, I'm referring to the turn-around ACK after the final ACK of the request.) This is a slight spec deviation, but is necessary to allow communication with nodes that do not generate the DS ACK. It also handles the case when a response is sent after the request state has been discarded. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/cm: Use correct reject code for invalid GIDSean Hefty1-11/+21
Set the reject code properly when rejecting a request that contains an invalid GID. A suitable GID is returned by the IB CM in the additional reject information (ARI). This is a spec compliancy issue. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/cm: Enable atomics along with RDMA readsSean Hefty1-1/+2
Enable atomic operations along with RDMA reads if a local RDMA read/atomic depth is provided by the user. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/mthca: Return correct number of bits for static rate in query_qpJack Morgenstein1-1/+1
Incorrect number of bits was taken for static_rate field. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/mthca: Return port number for unconnected QPs in query_qpJack Morgenstein1-4/+6
port_num was not being returned for unconnected QPs. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/mthca: Fix default static rate returned for Tavor in AVJack Morgenstein1-1/+1
When default static rate is returned for Tavor, need to translate it to an ib rate value. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: control receive polarity inversionBryan O'Sullivan6-0/+69
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: fix return value from ipath_pollBryan O'Sullivan1-1/+5
This stops the generic poll code from waiting for a timeout. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: allow SMA to be disabledBryan O'Sullivan1-0/+7
This is useful for testing purposes. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: handle sq_sig_all field correctlyBryan O'Sullivan1-5/+8
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: put a limit on the number of QPs that can be createdBryan O'Sullivan3-1/+25
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: validate path_mig_state properlyBryan O'Sullivan1-1/+2
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: be more strict about testing the modify QP verbBryan O'Sullivan2-2/+32
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: add serial number to hardware freeze error messageBryan O'Sullivan2-4/+6
Also added the word "Hardware" after "Fatal" to make it more obvious that it's hardware, not software. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: support new QLogic product naming schemeBryan O'Sullivan7-71/+68
This patch only renames files, fixes product names, and updates comments. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: account for attached QPs correctlyBryan O'Sullivan1-0/+2
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: do not allow use of CQ entries with invalid countsBryan O'Sullivan1-1/+6
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: add new minor device to allow sending of diag packetsBryan O'Sullivan4-0/+176
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: trivial cleanupsBryan O'Sullivan1-1/+0
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: remove stale references to userspace SMABryan O'Sullivan14-119/+35
When we first submitted a userspace subnet management agent, it was rejected, so we left it out of the final driver submission. This patch removes a number of vestigial references to it. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: simplify debugging code after ipath_core and ib_ipath mergerBryan O'Sullivan8-134/+17
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: simplify layering codeBryan O'Sullivan17-1329/+1126
A lot of ipath layer code was only called in one place. Now that the ipath_core and ib_ipath drivers are merged, it's more sensible to simply inline the simple stuff that the layer code was doing. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: merge ipath_core and ib_ipath driversBryan O'Sullivan10-292/+62
There is little point in keeping the two drivers separate, so we are merging them. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: drop requirement that PIO buffers be mmaped write-onlyBryan O'Sullivan1-9/+4
Some userlands try to mmap these pages read-write, so accommodate them. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: fix handling of kpiobufsBryan O'Sullivan1-1/+2
Change comment: no longer imply that user can set ipath_kpiobufs to zero. Actually set ipath_kpiobufs from parameter. Previously only altered per-device ipath_lastport_piobuf, which was over-written in chip init. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: fix for crash on module unload, if cfgports < portcntBryan O'Sullivan1-1/+5
Allocate enough pointers for all possible ports, to avoid problems in cleanup/unload. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: lock resource limit counters correctlyBryan O'Sullivan3-8/+38
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: More changes to support InfiniPath on PowerPC 970 systemsBryan O'Sullivan4-0/+66
Ordering of writethrough store buffers needs to be forced, and we need to use ifdef to get writethrough behavior to InfiniPath buffers, because there is no generic way to specify that at this time (similar to code in char/drm/drm_vm.c and block/z2ram.c). Signed-off-by: John Gregor <john.gregor@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: Performance improvements via mmap of queuesRalph Campbell9-382/+785
Improve performance of userspace post receive, post SRQ receive, and poll CQ operations for ipath by allowing userspace to directly mmap() receive queues and completion queues. This eliminates the copying between userspace and the kernel in the data path. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/uverbs: Pass userspace data to modify_srq and modify_qp methodsRalph Campbell10-15/+30
Pass a struct ib_udata to the low-level driver's ->modify_srq() and ->modify_qp() methods, so that it can get to the device-specific data passed in by the userspace driver. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/uverbs: Allow resize CQ operation to return driver-specific dataRalph Campbell1-2/+1
Add a ib_uverbs_resize_cq_resp.driver_data field so that low-level drivers can return data from a resize CQ operation to userspace. Have ib_uverbs_resize_cq() only copy the cqe field, to avoid having to bump the userspace ABI. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ehca: Add driver for IBM eHCA InfiniBand adaptersHeiko J Schick33-0/+11574
Add a driver for IBM GX bus InfiniBand adapters, which are usable with some pSeries/System p systems. Signed-off-by: Heiko J Schick <schickhj.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/srp: Add port/device attributesIshai Rabinovitz1-6/+24
Add local_ib_device and local_ib_port attributes to srp scsi_host. These are needed when we want to connect to the same target through multiple distinct ports. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/mthca: Include the header we really wantJames Lentini1-1/+1
Signed-off-by: James Lentini <jlentini@netapp.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/uverbs: Fix lockdep warning when QP is created with 2 CQsRoland Dreier1-15/+19
Lockdep warns when userspace creates a QP that uses different CQs for send completions and receive completions, because both CQs are locked and their mutexes belong to the same lock class. However, we know that the mutexes are distinct and the nesting is safe (there is no possibility of AB-BA deadlock because the mutexes are locked with down_read()), so annotate the situation with SINGLE_DEPTH_NESTING to get rid of the lockdep warning. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/uverbs: Use idr_read_cq() where appropriateRoland Dreier1-10/+6
There were two functions that open-coded idr_read_cq() in terms of idr_read_uobj() rather than using the helper. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipoib: Fix flush/start xmit race (from code review)Michael S. Tsirkin1-4/+8
Prevent flush task from freeing the ipoib_neigh pointer, while ipoib_start_xmit() is accessing the ipoib_neigh through the pointer it has loaded from the skb's hardware address. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/mthca: Don't use privileged UAR for kernel accessMichael S. Tsirkin1-1/+1
Make kernel use UAR2 instead of UAR1 for hardware access: this adds sanity checking from the hardware side, without any performance cost. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/mthca: Fix lid used for sending trapsJack Morgenstein1-1/+1
The SM LID used to send traps to is incorrectly set to port LID. This is a regression from 2.6.17 -- after a PortInfo MAD is received, no traps are sent to the SM LID. The traps go to the loopback interface instead, and are dropped there. The SM LID should be taken from the sm_lid of the PortInfo response. The bug was introduced by commit 12bbb2b7be7f5564952ebe0196623e97464b8ac5: IB/mthca: Add client reregister event generation Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds13-429/+877
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (64 commits) [BLOCK] dm-crypt: trivial comment improvements [CRYPTO] api: Deprecate crypto_digest_* and crypto_alg_available [CRYPTO] padlock: Convert padlock-sha to use crypto_hash [CRYPTO] users: Use crypto_comp and crypto_has_* [CRYPTO] api: Add crypto_comp and crypto_has_* [CRYPTO] users: Use crypto_hash interface instead of crypto_digest [SCSI] iscsi: Use crypto_hash interface instead of crypto_digest [CRYPTO] digest: Remove old HMAC implementation [CRYPTO] doc: Update documentation for hash and me [SCTP]: Use HMAC template and hash interface [IPSEC]: Use HMAC template and hash interface [CRYPTO] tcrypt: Use HMAC template and hash interface [CRYPTO] hmac: Add crypto template implementation [CRYPTO] digest: Added user API for new hash type [CRYPTO] api: Mark parts of cipher interface as deprecated [PATCH] scatterlist: Add const to sg_set_buf/sg_init_one pointer argument [CRYPTO] drivers: Remove obsolete block cipher operations [CRYPTO] users: Use block ciphers where applicable [SUNRPC] GSS: Use block ciphers where applicable [IPSEC] ESP: Use block ciphers where applicable ...
2006-09-22Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds43-6658/+7105
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (44 commits) [S390] hypfs crashes with invalid mount option. [S390] cio: subchannel evaluation function operates without lock [S390] cio: always query all paths on path verification. [S390] cio: update path groups on logical CHPID changes. [S390] cio: subchannels in no-path state. [S390] Replace nopav-message on VM. [S390] set modalias for ccw bus uevents. [S390] Get rid of DBG macro. [S390] Use alternative user-copy operations for new hardware. [S390] Make user-copy operations run-time configurable. [S390] Cleanup in signal handling code. [S390] Cleanup in page table related code. [S390] Linux API for writing z/VM APPLDATA Monitor records. [S390] xpram off by one error. [S390] Remove kexec experimental flag. [S390] cleanup appldata. [S390] fix typo in vmcp. [S390] Kernel stack overflow handling. [S390] qdio slsb processing state. [S390] Missing initialization in common i/o layer. ...
2006-09-22Merge git://git.infradead.org/mtd-2.6Linus Torvalds31-723/+1256
* git://git.infradead.org/mtd-2.6: Remove accidentally-added include/linux/utsrelease.h Revert "[MTD] blkdev helper code: fix printk format warning" [MTD] Add SSFDC (SmartMedia) read-only translation layer [MTD] pmc551 pci cleanup [MTD] pmc551 use kzalloc [MTD] pmc551 whitespace cleanup [MTD] Remove iq80310 map driver [MTD NAND] Fix in typo ndfc.c causing wrong ECC layout [MTD] physmap: add power management support ioremap balanced with iounmap for drivers/mtd subsystem [MTD] Switch to pci_get_device and do ref counting [MTD] blkdev helper code: fix printk format warning [MTD] Fix ixp4xx partition parsing. [JFFS2] Remove unneeded ifdefs from jffs2_fs_i.h [MTD NAND] Remove old code in au1550nd.c [MTD] Unlock NOR flash automatically where necessary
2006-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds48-214/+1077
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (114 commits) [POWERPC] Fix ohare IDE irq workaround on old powermacs [POWERPC] EEH: Power4 systems sometimes need multiple resets. [POWERPC] Include <asm/mmu.h> in arch/powerpc/sysdev/fsl_soc.h for phys_addr_t. [POWERPC] Demacrofy arch/powerpc/platforms/maple/pci.c [POWERPC] Maple U3 HT - reject inappropriate config space access [POWERPC] Fix IPIC pending register assignments [POWERPC] powerpc: fix building gdb against asm/ptrace.h [POWERPC] Remove DISCONTIGMEM cruft from page.h [POWERPC] Merge iSeries i/o operations with the rest [POWERPC] 40x: Fix debug status register defines [POWERPC] Fix compile error in sbc8560 [POWERPC] EEH: support MMIO enable recovery step [POWERPC] EEH: enable MMIO/DMA on frozen slot [POWERPC] EEH: code comment cleanup [POWERPC] EEH: balance pcidev_get/put calls [POWERPC] PPC: Fix xmon stack frame address in backtrace [POWERPC] Add AT_PLATFORM value for Xilinx Virtex-4 FX [POWERPC] Start arch/powerpc/boot code reorganization [POWERPC] Define of_read_ulong helper [POWERPC] iseries: eliminate a couple of warnings ...
2006-09-22Revert "[MTD] blkdev helper code: fix printk format warning"David Woodhouse1-1/+1
This reverts commit 668040fcd1e06fc3e68a92708cbdfa5a52c37d3c. The 'flags' field of the struct request is 'unsigned long'. Quite how Randy came to see 'long int format, different type arg' I don't know, but it doesn't seem to be the case any more. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] Add SSFDC (SmartMedia) read-only translation layerClaudio Lanconelli3-0/+477
Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22[MTD] pmc551 pci cleanupJiri Slaby1-8/+5
Use pci_resource_start for getting start of regions and pci_iomap to not doing this directly by using dev->resource... (Thanks to Rolf Eike Beer) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 06:45:29 +0000