summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-09-21misc: eeprom: use helper to get i2c_client from kobjWolfram Sang1-1/+1
Slightly easier to read. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21i2c: rcar: add HostNotify supportWolfram Sang2-3/+29
The I2C core can now utilize a slave interface to handle SMBus HostNotify events. Enable it in this driver. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21i2c: add slave testunit driverWolfram Sang3-0/+184
Here is an I2C slave backend driver which allows to test some uncommon functionalities of the I2C and SMBus world. Usually, you need specific devices to test e.g. SMBus Host Notify and such. With this driver you just need the slave interface of another I2C controller. This initial version has testcases for multi-master and SMBus Host Notify. Already planned but not yet implemented are SMBus Alert and messages with I2C_M_RECV_LEN. Please read the documentation for further details. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: stm32: name slave slot to ease maintenanceAlain Volmat1-8/+14
Name slave slots in order to ease code maintenance. Signed-off-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: bcm2835: Simplify with dev_err_probe()Krzysztof Kozlowski1-5/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: mux: reg: Simplify with dev_err_probe()Krzysztof Kozlowski1-7/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: mux: gpmux: Simplify with dev_err_probe()Krzysztof Kozlowski1-10/+6
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: rcar: refactor and shorten timeout when resettingWolfram Sang1-12/+3
LOOP_TIMEOUT was only used back then because we didn't want to introduce another constant. The timeout value can easily be a magnitude shorter because the typical range is 3us - 8us. Refactor the code to use the poll_timeout helper, use a specific timeout value and get rid of the ugly LOOP_TIMEOUT constant. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: rcar: improve bus busy detectionWolfram Sang1-9/+10
I2C doesn't define a timeout for bus busy, so an arbitrary value like LOOP_TIMEOUT is not a good idea. Let's use the timeout value in struct adapter which is meant for such cases and is user-configurable (via IOCTL). To reduce the load, wait 10us instead of 1us which is good enough for the slow frequencies used by I2C. Finally, use the poll_timeout helper instead of open coding it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: stm32f7: Add SMBus Host-Notify protocol supportAlain Volmat2-16/+97
Rely on the core functions to implement the host-notify protocol via the a I2C slave device. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-09i2c: smbus: add core function handling SMBus host-notifyAlain Volmat1-0/+107
SMBus Host-Notify protocol, from the adapter point of view consist of receiving a message from a client, including the client address and some other data. It can be simply handled by creating a new slave device and registering a callback performing the parsing of the message received from the client. This commit introduces two new core functions * i2c_new_slave_host_notify_device * i2c_free_slave_host_notify_device that take care of registration of the new slave device and callback and will call i2c_handle_smbus_host_notify once a Host-Notify event is received. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-09i2c: imx: Use dev_err_probe() to simplify error handlingAnson Huang1-5/+3
dev_err_probe() can reduce code size, uniform error handling and record the defer probe reason etc., use it to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-09i2c: i801: Register lis3lv02d I2C device on Dell Latitude 5480Jeffrey Lin1-0/+1
Value of /sys/devices/platform/lis3lv02d/position when Horizontal: (36,-108,-1152) Left elevated: (-432,-126,-1062) Front elevated: (36,594,-936) Upside down: (-126,-252,1098) Signed-off-by: Jeffrey Lin <jeffrey@icurse.nl> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-08-28i2c: rcar: Auto select RESET_CONTROLLERDirk Behme1-0/+1
The i2c-rcar driver utilizes the Generic Reset Controller kernel feature, so select the RESET_CONTROLLER option when the I2C_RCAR option is selected with a Gen3 SoC. Fixes: 2b16fd63059ab9 ("i2c: rcar: handle RXDMA HW behaviour on Gen3") Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Andy Lowe <andy_lowe@mentor.com> [erosca: Add "if ARCH_RCAR_GEN3" per Wolfram's request] Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-08-28i2c: xiic: Support forcing single-master in DTJaakko Laine1-0/+14
I2C master operating in multimaster mode can get stuck indefinitely if I2C start is detected on bus, but no master has a transaction going. This is a weakness in I2C standard, which defines no way to recover, since all masters are indefinitely disallowed from interrupting the currently operating master. A start condition can be created for example by an electromagnetic discharge applied near physical I2C lines. Or a already operating master could get reset immediately after sending a start. If it is known during device tree creation that only a single I2C master will be present on the bus, this deadlock of the I2C bus could be avoided in the driver by ignoring the bus_is_busy register of the xiic, since bus can never be reserved by any other master. This patch adds this support for detecting single-master flag in device tree and when provided, improves I2C reliability by ignoring the therefore unnecessary xiic bus_is_busy register. Error can be reproduced by pulling I2C SDA -line temporarily low by shorting it to ground, while linux I2C master is operating on it using the xiic driver. The application using the bus will start receiving linux error code 16: "Device or resource busy" indefinitely: kernel: pca953x 0-0020: failed writing register app: Error writing file, error: 16 With multi-master disabled device will instead receive error code 5: "I/O error" while SDA is grounded, but recover normal operation once short is removed. kernel: pca953x 0-0020: failed reading register app: Error reading file, error: 5 Signed-off-by: Jaakko Laine <ext-jaakko.laine@vaisala.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-08-28i2c: xiic: Improve struct memory alignmentJaakko Laine1-2/+2
xiic_i2c struct alignment causes the struct to take more space in memory than strictly required. Move state -member to end of struct to get less padding. Signed-off-by: Jaakko Laine <ext-jaakko.laine@vaisala.com> Suggested-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-08-28i2c: xiic: Change code alignment to 1 space onlyJaakko Laine1-24/+24
Alignment removed and replaced with 1 space only to reduce need for future alignment changes affecting multiple lines, when new variables are added. Signed-off-by: Jaakko Laine <ext-jaakko.laine@vaisala.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-08-25i2c: Remove 'default n' from busses/KconfigJarkko Nikula2-4/+0
The default value for a config option defaults to 'n' so it doesn't need to be set here. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> [jdelvare: found another one] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-08-23Merge tag 'efi-urgent-2020-08-23' of ↵Linus Torvalds2-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Thomas Gleixner: - Enforce NX on RO data in mixed EFI mode - Destroy workqueue in an error handling path to prevent UAF - Stop argument parser at '--' which is the delimiter for init - Treat a NULL command line pointer as empty instead of dereferncing it unconditionally. - Handle an unterminated command line correctly - Cleanup the 32bit code leftovers and remove obsolete documentation * tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: efi: remove description of efi=old_map efi/x86: Move 32-bit code into efi_32.c efi/libstub: Handle unterminated cmdline efi/libstub: Handle NULL cmdline efi/libstub: Stop parsing arguments at "--" efi: add missed destroy_workqueue when efisubsys_init fails efi/x86: Mark kernel rodata non-executable for mixed mode
2020-08-23Merge tag 'edac_urgent_for_v5.9_rc2' of ↵Linus Torvalds4-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: "A single fix correcting a reversed error severity determination check which lead to a recoverable error getting marked as fatal, by Tony Luck" * tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/{i7core,sb,pnd2,skx}: Fix error event severity
2020-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds18-58/+133
Pull networking fixes from David Miller: "Nothing earth shattering here, lots of small fixes (f.e. missing RCU protection, bad ref counting, missing memset(), etc.) all over the place: 1) Use get_file_rcu() in task_file iterator, from Yonghong Song. 2) There are two ways to set remote source MAC addresses in macvlan driver, but only one of which validates things properly. Fix this. From Alvin Šipraga. 3) Missing of_node_put() in gianfar probing, from Sumera Priyadarsini. 4) Preserve device wanted feature bits across multiple netlink ethtool requests, from Maxim Mikityanskiy. 5) Fix rcu_sched stall in task and task_file bpf iterators, from Yonghong Song. 6) Avoid reset after device destroy in ena driver, from Shay Agroskin. 7) Missing memset() in netlink policy export reallocation path, from Johannes Berg. 8) Fix info leak in __smc_diag_dump(), from Peilin Ye. 9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark Tomlinson. 10) Fix number of data stream negotiation in SCTP, from David Laight. 11) Fix double free in connection tracker action module, from Alaa Hleihel. 12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) net: nexthop: don't allow empty NHA_GROUP bpf: Fix two typos in uapi/linux/bpf.h net: dsa: b53: check for timeout tipc: call rcu_read_lock() in tipc_aead_encrypt_done() net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow net: sctp: Fix negotiation of the number of data streams. dt-bindings: net: renesas, ether: Improve schema validation gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit() hv_netvsc: Remove "unlikely" from netvsc_select_queue bpf: selftests: global_funcs: Check err_str before strstr bpf: xdp: Fix XDP mode when no mode flags specified selftests/bpf: Remove test_align leftovers tools/resolve_btfids: Fix sections with wrong alignment net/smc: Prevent kernel-infoleak in __smc_diag_dump() sfc: fix build warnings on 32-bit net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified" libbpf: Fix map index used in error message net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe() net: atlantic: Use readx_poll_timeout() for large timeout ...
2020-08-22Merge tag 's390-5.9-3' of ↵Linus Torvalds2-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - a couple of fixes for storage key handling relevant for debugging - add cond_resched into potentially slow subchannels scanning loop - fixes for PF/VF linking and to ignore stale PCI configuration request events * tag 's390-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: fix PF/VF linking on hot plug s390/pci: re-introduce zpci_remove_device() s390/pci: fix zpci_bus_link_virtfn() s390/ptrace: fix storage key handling s390/runtime_instrumentation: fix storage key handling s390/pci: ignore stale configuration request event s390/cio: add cond_resched() in the slow_eval_known_fn() loop
2020-08-22Merge tag 'scsi-fixes' of ↵Linus Torvalds16-52/+119
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "23 fixes in 5 drivers (qla2xxx, ufs, scsi_debug, fcoe, zfcp). The bulk of the changes are in qla2xxx and ufs and all are mostly small and definitely don't impact the core" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits) Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe" Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command" scsi: qla2xxx: Fix null pointer access during disconnect from subsystem scsi: qla2xxx: Check if FW supports MQ before enabling scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hba scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime scsi: qla2xxx: Reduce noisy debug message scsi: qla2xxx: Fix login timeout scsi: qla2xxx: Indicate correct supported speeds for Mezz card scsi: qla2xxx: Flush I/O on zone disable scsi: qla2xxx: Flush all sessions on zone disable scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout values scsi: scsi_debug: Fix scp is NULL errors scsi: zfcp: Fix use-after-free in request timeout handlers scsi: ufs: No need to send Abort Task if the task in DB was cleared scsi: ufs: Clean up completed request without interrupt notification scsi: ufs: Improve interrupt handling for shared interrupts scsi: ufs: Fix interrupt error message for shared interrupts scsi: ufs-pci: Add quirk for broken auto-hibernate for Intel EHL scsi: ufs-mediatek: Fix incorrect time to wait link status ...
2020-08-22Merge tag 'devicetree-fixes-for-5.9-2' of ↵Linus Torvalds1-1/+20
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: "Another set of DT fixes: - restore range parsing error check - workaround PCI range parsing with missing 'device_type' now required - correct description of 'phy-connection-type' - fix erroneous matching on 'snps,dw-pcie' by 'intel,lgm-pcie' schema - a couple of grammar and whitespace fixes - update Shawn Guo's email" * tag 'devicetree-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: vendor-prefixes: Remove trailing whitespace dt-bindings: net: correct description of phy-connection-type dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances of: address: Work around missing device_type property in pcie nodes dt: writing-schema: Miscellaneous grammar fixes dt-bindings: Use Shawn Guo's preferred e-mail for i.MX bindings of/address: check for invalid range.cpu_addr
2020-08-21Merge tag 'riscv-for-linus-5.9-rc2' of ↵Linus Torvalds4-17/+239
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - The CLINT driver has been split in two: one to handle the M-mode CLINT (memory mapped and used on NOMMU systems) and one to handle the S-mode CLINT (via SBI). - The addition of SiFive's drivers to rv32_defconfig * tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Add SiFive drivers to rv32_defconfig dt-bindings: timer: Add CLINT bindings RISC-V: Remove CLINT related code from timer and arch clocksource/drivers: Add CLINT timer driver RISC-V: Add mechanism to provide custom IPI operations
2020-08-21Merge tag 'for-linus-5.9-rc2-tag' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "One build fix and a minor fix for suppressing a useless warning when booting a Xen dom0 via UEFI" * tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Fix build error when CONFIG_ACPI is not set/enabled: efi: avoid error message when booting under Xen
2020-08-21Merge tag 'pm-5.9-rc2' of ↵Linus Torvalds1-7/+12
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a few issues in the operating performance points (OPP) framework. Specifics: - Fix re-enabling of resources in dev_pm_opp_set_rate() (Rajendra Nayak) - Fix OPP table reference counting in error paths (Stephen Boyd)" * tag 'pm-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: opp: Enable resources again if they were disabled earlier opp: Put opp table in dev_pm_opp_set_rate() if _set_opp_bw() fails opp: Put opp table in dev_pm_opp_set_rate() for empty tables
2020-08-21net: dsa: b53: check for timeoutTom Rix1-0/+2
clang static analysis reports this problem b53_common.c:1583:13: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ent.port &= ~BIT(port); ~~~~~~~~ ^ ent is set by a successful call to b53_arl_read(). Unsuccessful calls are caught by an switch statement handling specific returns. b32_arl_read() calls b53_arl_op_wait() which fails with the unhandled -ETIMEDOUT. So add -ETIMEDOUT to the switch statement. Because b53_arl_op_wait() already prints out a message, do not add another one. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds10-18/+14
Pull rdma fixes from Jason Gunthorpe: "One regression from 5.8 and a few bugs from earlier kernels: - Various spelling corrections in kernel prints - Bug fixes in hfi1 and bntx_re - Revert a 5.8 patch in hns - Batch update for Mellanox and Cumulus maintainers emails" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain Revert "RDMA/hns: Reserve one sge in order to avoid local length error" RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE request RDMA/bnxt_re: Do not add user qps to flushlist RDMA/core: Fix spelling mistake "Could't" -> "Couldn't" RDMA/usnic: Fix spelling mistake "transistion" -> "transition" RDMA/hns: Fix spelling mistake "epmty" -> "empty"
2020-08-21Merge tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drmLinus Torvalds41-94/+317
Pull drm fixes from Dave Airlie: "Regular fixes pull for rc2. Usual rc2 doesn't seem too busy, mainly i915 and amdgpu. I'd expect the usual uptick for rc3. amdgpu: - Fix allocation size - SR-IOV fixes - Vega20 SMU feature state caching fix - Fix custom pptable handling - Arcturus golden settings update - Several display fixes - Fixes for Navy Flounder - Misc display fixes - RAS fix amdkfd: - SDMA fix for renoir i915: - Fix device parameter usage for selftest mock i915 device - Fix LPSP capability debugfs NULL dereference - Fix buddy register pagemask table - Fix intel_atomic_check() non-negative return value - Fix selftests passing a random 0 into ilog2() - Fix TGL power well enable/disable ordering - Switch to PMU module refcounting - GVT fixes virtio: - Add missing dma_fence_put() in virtio_gpu_execbuffer_ioctl() - Fix memory leak in virtio_gpu_cleanup_object()" * tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm: (34 commits) Revert "drm/amdgpu: disable gfxoff for navy_flounder" drm/i915/tgl: Make sure TC-cold is blocked before enabling TC AUX power wells drm/i915/selftests: Avoid passing a random 0 into ilog2 drm/i915: Fix wrong return value in intel_atomic_check() drm/i915: Update bw_buddy pagemask table drm/i915/display: Check for an LPSP encoder before dereferencing drm/i915: Copy default modparams to mock i915_device drm/i915: Provide the perf pmu.module drm/amd/display: fix pow() crashing when given base 0 drm/amd/display: Reset scrambling on Test Pattern drm/amd/display: fix dcn3 wide timing dsc validation drm/amd/display: Fix DFPstate hang due to view port changed drm/amd/display: Assign correct left shift drm/amd/display: Call DMUB for eDP power control drm/amdkfd: fix the wrong sdma instance query for renoir drm/amdgpu: parse ta firmware for navy_flounder drm/amdgpu: fix NULL pointer access issue when unloading driver drm/amdgpu: fix uninit-value in arcturus_log_thermal_throttling_event() drm/amdgpu: disable gfxoff for navy_flounder drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal ...
2020-08-21Merge tag 'drm-intel-fixes-2020-08-20' of ↵Dave Airlie11-27/+75
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc2: - GVT fixes - Fix device parameter usage for selftest mock i915 device - Fix LPSP capability debugfs NULL dereference - Fix buddy register pagemask table - Fix intel_atomic_check() non-negative return value - Fix selftests passing a random 0 into ilog2() - Fix TGL power well enable/disable ordering - Switch to PMU module refcounting Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87a6yp7jp3.fsf@intel.com
2020-08-21Merge tag 'amd-drm-fixes-5.9-2020-08-20' of ↵Dave Airlie16-22/+126
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-08-20: amdgpu: - Fixes for Navy Flounder - Misc display fixes - RAS fix amdkfd: - SDMA fix for renoir Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200820041938.3928-1-alexander.deucher@amd.com
2020-08-20hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()Haiyang Zhang1-1/+1
netvsc_vf_xmit() / dev_queue_xmit() will call VF NIC’s ndo_select_queue or netdev_pick_tx() again. They will use skb_get_rx_queue() to get the queue number, so the “skb->queue_mapping - 1” will be used. This may cause the last queue of VF not been used. Use skb_record_rx_queue() here, so that the skb_get_rx_queue() called later will get the correct queue number, and VF will be able to use all queues. Fixes: b3bf5666a510 ("hv_netvsc: defer queue selection to VF") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-20hv_netvsc: Remove "unlikely" from netvsc_select_queueHaiyang Zhang1-1/+1
When using vf_ops->ndo_select_queue, the number of queues of VF is usually bigger than the synthetic NIC. This condition may happen often. Remove "unlikely" from the comparison of ndev->real_num_tx_queues. Fixes: b3bf5666a510 ("hv_netvsc: defer queue selection to VF") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-20Merge tag 'pci-v5.9-fixes-1' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Fix P2PDMA build issue (Christoph Hellwig)" * tag 'pci-v5.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/P2PDMA: Fix build without DMA ops
2020-08-20sfc: fix build warnings on 32-bitEdward Cree1-4/+4
Truncation of DMA_BIT_MASK to 32-bit dma_addr_t is semantically safe, but the compiler was warning because it was happening implicitly. Insert explicit casts to suppress the warnings. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-20net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"Kaige Li1-2/+2
There are a couple of spelling mistakes in comment text. Fix these. Signed-off-by: Kaige Li <likaige@loongson.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-20RISC-V: Remove CLINT related code from timer and archAnup Patel2-17/+3
Right now the RISC-V timer driver is convoluted to support: 1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for clocksource and SBI timer calls for clockevent device. 2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO counter register for clocksource and CLINT MMIO compare register for clockevent device. We now have a separate CLINT timer driver which also provide CLINT based IPI operations so let's remove CLINT MMIO related code from arch/riscv directory and RISC-V timer driver. Signed-off-by: Anup Patel <anup.patel@wdc.com> Tested-by: Emil Renner Berhing <kernel@esmil.dk> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-08-20clocksource/drivers: Add CLINT timer driverAnup Patel3-0/+236
We add a separate CLINT timer driver for Linux RISC-V M-mode (i.e. RISC-V NoMMU kernel). The CLINT MMIO device provides three things: 1. 64bit free running counter register 2. 64bit per-CPU time compare registers 3. 32bit per-CPU inter-processor interrupt registers Unlike other timer devices, CLINT provides IPI registers along with timer registers. To use CLINT IPI registers, the CLINT timer driver provides IPI related callbacks to arch/riscv. Signed-off-by: Anup Patel <anup.patel@wdc.com> Tested-by: Emil Renner Berhing <kernel@esmil.dk> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-08-20Merge tag 'dma-mapping-5.9-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-2/+2
Pull dma-mapping fixes from Christoph Hellwig: "Fix more fallout from the dma-pool changes (Nicolas Saenz Julienne, me)" * tag 'dma-mapping-5.9-1' of git://git.infradead.org/users/hch/dma-mapping: dma-pool: Only allocate from CMA when in same memory zone dma-pool: fix coherent pool allocations for IOMMU mappings
2020-08-20Revert "RDMA/hns: Reserve one sge in order to avoid local length error"Weihang Li5-14/+8
This patch caused some issues on SEND operation, and it should be reverted to make the drivers work correctly. There will be a better solution that has been tested carefully to solve the original problem. This reverts commit 711195e57d341e58133d92cf8aaab1db24e4768d. Fixes: 711195e57d34 ("RDMA/hns: Reserve one sge in order to avoid local length error") Link: https://lore.kernel.org/r/1597829984-20223-1-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-20RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE requestKaike Wan1-0/+1
The following message occurs when running an AI application with TID RDMA enabled: hfi1 0000:7f:00.0: hfi1_0: [QP74] hfi1_tid_timeout 4084 hfi1 0000:7f:00.0: hfi1_0: [QP70] hfi1_tid_timeout 4084 The issue happens when TID RDMA WRITE request is followed by an IB_WR_RDMA_WRITE_WITH_IMM request, the latter could be completed first on the responder side. As a result, no ACK packet for the latter could be sent because the TID RDMA WRITE request is still being processed on the responder side. When the TID RDMA WRITE request is eventually completed, the requester will wait for the IB_WR_RDMA_WRITE_WITH_IMM request to be acknowledged. If the next request is another TID RDMA WRITE request, no TID RDMA WRITE DATA packet could be sent because the preceding IB_WR_RDMA_WRITE_WITH_IMM request is not completed yet. Consequently the IB_WR_RDMA_WRITE_WITH_IMM will be retried but it will be ignored on the responder side because the responder thinks it has already been completed. Eventually the retry will be exhausted and the qp will be put into error state on the requester side. On the responder side, the TID resource timer will eventually expire because no TID RDMA WRITE DATA packets will be received for the second TID RDMA WRITE request. There is also risk of a write-after-write memory corruption due to the issue. Fix by adding a requester side interlock to prevent any potential data corruption and TID RDMA protocol error. Fixes: a0b34f75ec20 ("IB/hfi1: Add interlock between a TID RDMA request and other requests") Link: https://lore.kernel.org/r/20200811174931.191210.84093.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> # 5.4.x+ Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-20RDMA/bnxt_re: Do not add user qps to flushlistSelvin Xavier1-1/+2
Driver shall add only the kernel qps to the flush list for clean up. During async error events from the HW, driver is adding qps to this list without checking if the qp is kernel qp or not. Add a check to avoid user qp addition to the flush list. Fixes: 942c9b6ca8de ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing") Fixes: c50866e2853a ("bnxt_re: fix the regression due to changes in alloc_pbl") Link: https://lore.kernel.org/r/1596689148-4023-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-20RDMA/core: Fix spelling mistake "Could't" -> "Couldn't"Colin Ian King1-1/+1
There is a spelling mistake in a pr_warn message. Fix it. Link: https://lore.kernel.org/r/20200810075824.46770-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-20efi/libstub: Handle unterminated cmdlineArvind Sankar1-2/+4
Make the command line parsing more robust, by handling the case it is not NUL-terminated. Use strnlen instead of strlen, and make sure that the temporary copy is NUL-terminated before parsing. Cc: <stable@vger.kernel.org> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200813185811.554051-4-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-08-20efi/libstub: Handle NULL cmdlineArvind Sankar1-1/+5
Treat a NULL cmdline the same as empty. Although this is unlikely to happen in practice, the x86 kernel entry does check for NULL cmdline and handles it, so do it here as well. Cc: <stable@vger.kernel.org> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200729193300.598448-1-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-08-20efi/libstub: Stop parsing arguments at "--"Arvind Sankar1-0/+2
Arguments after "--" are arguments for init, not for the kernel. Cc: <stable@vger.kernel.org> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200725155916.1376773-1-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-08-20efi: add missed destroy_workqueue when efisubsys_init failsLi Heng1-0/+2
destroy_workqueue() should be called to destroy efi_rts_wq when efisubsys_init() init resources fails. Cc: <stable@vger.kernel.org> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Li Heng <liheng40@huawei.com> Link: https://lore.kernel.org/r/1595229738-10087-1-git-send-email-liheng40@huawei.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-08-20opp: Enable resources again if they were disabled earlierRajendra Nayak1-4/+7
dev_pm_opp_set_rate() can now be called with freq = 0 in order to either drop performance or bandwidth votes or to disable regulators on platforms which support them. In such cases, a subsequent call to dev_pm_opp_set_rate() with the same frequency ends up returning early because 'old_freq == freq' Instead make it fall through and put back the dropped performance and bandwidth votes and/or enable back the regulators. Cc: v5.3+ <stable@vger.kernel.org> # v5.3+ Fixes: cd7ea582866f ("opp: Make dev_pm_opp_set_rate() handle freq = 0 to drop performance votes") Reported-by: Sajida Bhanu <sbhanu@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reported-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> [ Viresh: Don't skip clk_set_rate() and massaged changelog ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-08-20efi: avoid error message when booting under XenJuergen Gross1-1/+1
efifb_probe() will issue an error message in case the kernel is booted as Xen dom0 from UEFI as EFI_MEMMAP won't be set in this case. Avoid that message by calling efi_mem_desc_lookup() only if EFI_MEMMAP is set. Fixes: 38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB") Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Juergen Gross <jgross@suse.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 15:48:49 +0000