summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-05-10device property: Retrieve fwnode from of_node via accessorAndy Shevchenko1-2/+2
OF provides a specific accessor to retrieve fwnode handle. Use it instead of direct dereferencing. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-05-09fbmem: fix horribly incorrect placement of __maybe_unusedLinus Torvalds1-1/+1
Commit b9d79e4ca4ff ("fbmem: Mark proc_fb_seq_ops as __maybe_unused") places the '__maybe_unused' in an entirely incorrect location between the "struct" keyword and the structure name. It's a wonder that gcc accepts that silently, but clang quite reasonably warns about it: drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes] static const struct __maybe_unused seq_operations proc_fb_seq_ops = { ^ Fix it. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-09Merge tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds19-81/+332
Pull drm fixes from Dave Airlie: "Bit later than usual, I queued them all up on Friday then promptly forgot to write the pull request email. This is mainly amdgpu fixes, with some radeon/msm/fbdev and one i915 gvt fix thrown in. amdgpu: - MPO hang workaround - Fix for concurrent VM flushes on vega/navi - dcefclk is not adjustable on navi1x and newer - MST HPD debugfs fix - Suspend/resumes fixes - Register VGA clients late in case driver fails to load - Fix GEM leak in user framebuffer create - Add support for polaris12 with 32 bit memory interface - Fix duplicate cursor issue when using overlay - Fix corruption with tiled surfaces on VCN3 - Add BO size and stride check to fix BO size verification radeon: - Fix off-by-one in power state parsing - Fix possible memory leak in power state parsing msm: - NULL ptr dereference fix fbdev: - procfs disabled warning fix i915: - gvt: Fix a possible division by zero in vgpu display rate calculation" * tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: Use device specific BO size & stride check. drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode. drm/amd/pm: initialize variable drm/radeon: Avoid power table parsing memory leaks drm/radeon: Fix off-by-one power_state index heap overwrite drm/amd/display: Fix two cursor duplication when using overlay drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC fbmem: Mark proc_fb_seq_ops as __maybe_unused drm/msm/dpu: Delete bonkers code drm/i915/gvt: Prevent divided by zero when calculating refresh rate amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create drm/amdgpu: Register VGA clients after init can no longer fail drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown drm/amdgpu: fix r initial values drm/amd/display: fix wrong statement in mst hpd debugfs amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2 drm/amd/display: Reject non-zero src_y and src_x for video planes
2021-05-08drm/i915/display: fix compiler warning about array overrunLinus Torvalds1-1/+12
intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event Status Indicator data, but then passes that buffer at offset 10 off as an argument to drm_dp_channel_eq_ok(). End result: there are only 4 bytes remaining of the buffer, yet drm_dp_channel_eq_ok() wants a 6-byte buffer. gcc-11 correctly warns about this case: drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’: drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread] 3491 | !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’} In file included from drivers/gpu/drm/i915/display/intel_dp.c:38: include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’ 1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE], | ^~~~~~~~~~~~~~~~~~~~ 6:14 elapsed This commit just extends the original array by 2 zero-initialized bytes, avoiding the warning. There may be some underlying bug in here that caused this confusion, but this is at least no worse than the existing situation that could use random data off the stack. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-08Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds10-485/+434
Pull more SCSI updates from James Bottomley: "This is a set of minor fixes in various drivers (qla2xxx, ufs, scsi_debug, lpfc) one doc fix and a fairly large update to the fnic driver to remove the open coded iteration functions in favour of the scsi provided ones" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: fnic: Use scsi_host_busy_iter() to traverse commands scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io() scsi: scsi_debug: Fix cmd_per_lun, set to max_queue scsi: ufs: core: Narrow down fast path in system suspend path scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend scsi: ufs: core: Do not put UFS power into LPM if link is broken scsi: qla2xxx: Prevent PRLI in target mode scsi: qla2xxx: Add marginal path handling support scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found scsi: ufs: core: Fix a typo in ufs-sysfs.c scsi: lpfc: Fix bad memory access during VPD DUMP mailbox command scsi: lpfc: Fix DMA virtual address ptr assignment in bsg scsi: lpfc: Fix illegal memory access on Abort IOCBs scsi: blk-mq: Fix build warning when making htmldocs
2021-05-08Merge tag 'kbuild-v5.13-2' of ↵Linus Torvalds3-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - Convert sh and sparc to use generic shell scripts to generate the syscall headers - refactor .gitignore files - Update kernel/config_data.gz only when the content of the .config is really changed, which avoids the unneeded re-link of vmlinux - move "remove stale files" workarounds to scripts/remove-stale-files - suppress unused-but-set-variable warnings by default for Clang as well - fix locale setting LANG=C to LC_ALL=C - improve 'make distclean' - always keep intermediate objects from scripts/link-vmlinux.sh - move IF_ENABLED out of <linux/kconfig.h> to make it self-contained - misc cleanups * tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h> kbuild: Don't remove link-vmlinux temporary files on exit/signal kbuild: remove the unneeded comments for external module builds kbuild: make distclean remove tag files in sub-directories kbuild: make distclean work against $(objtree) instead of $(srctree) kbuild: refactor modname-multi by using suffix-search kbuild: refactor fdtoverlay rule kbuild: parameterize the .o part of suffix-search arch: use cross_compiling to check whether it is a cross build or not kbuild: remove ARCH=sh64 support from top Makefile .gitignore: prefix local generated files with a slash kbuild: replace LANG=C with LC_ALL=C Makefile: Move -Wno-unused-but-set-variable out of GCC only block kbuild: add a script to remove stale generated files kbuild: update config_data.gz only when the content of .config is changed .gitignore: ignore only top-level modules.builtin .gitignore: move tags and TAGS close to other tag files kernel/.gitgnore: remove stale timeconst.h and hz.bc usr/include: refactor .gitignore genksyms: fix stale comment ...
2021-05-08Merge tag 'net-5.13-rc1' of ↵Linus Torvalds36-165/+172
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc1, including fixes from bpf, can and netfilter trees. Self-contained fixes, nothing risky. Current release - new code bugs: - dsa: ksz: fix a few bugs found by static-checker in the new driver - stmmac: fix frame preemption handshake not triggering after interface restart Previous releases - regressions: - make nla_strcmp handle more then one trailing null character - fix stack OOB reads while fragmenting IPv4 packets in openvswitch and net/sched - sctp: do asoc update earlier in sctp_sf_do_dupcook_a - sctp: delay auto_asconf init until binding the first addr - stmmac: clear receive all(RA) bit when promiscuous mode is off - can: mcp251x: fix resume from sleep before interface was brought up Previous releases - always broken: - bpf: fix leakage of uninitialized bpf stack under speculation - bpf: fix masking negation logic upon negative dst register - netfilter: don't assume that skb_header_pointer() will never fail - only allow init netns to set default tcp cong to a restricted algo - xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid false positive errors - ethtool: fix missing NLM_F_MULTI flag when dumping - can: m_can: m_can_tx_work_queue(): fix tx_skb race condition - sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b - bridge: fix NULL-deref caused by a races between assigning rx_handler_data and setting the IFF_BRIDGE_PORT bit Latecomer: - seg6: add counters support for SRv6 Behaviors" * tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits) atm: firestream: Use fallthrough pseudo-keyword net: stmmac: Do not enable RX FIFO overflow interrupts mptcp: fix splat when closing unaccepted socket i40e: Remove LLDP frame filters i40e: Fix PHY type identifiers for 2.5G and 5G adapters i40e: fix the restart auto-negotiation after FEC modified i40e: Fix use-after-free in i40e_client_subtask() i40e: fix broken XDP support netfilter: nftables: avoid potential overflows on 32bit arches netfilter: nftables: avoid overflows in nft_hash_buckets() tcp: Specify cmsgbuf is user pointer for receive zerocopy. mlxsw: spectrum_mr: Update egress RIF list before route's action net: ipa: fix inter-EE IRQ register definitions can: m_can: m_can_tx_work_queue(): fix tx_skb race condition can: mcp251x: fix resume from sleep before interface was brought up can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe netfilter: nftables: Fix a memleak from userdata error path in new objects netfilter: remove BUG_ON() after skb_header_pointer() netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check ...
2021-05-09linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>Masahiro Yamada1-0/+3
<linux/kconfig.h> is included from all the kernel-space source files, including C, assembly, linker scripts. It is intended to contain a minimal set of macros to evaluate CONFIG options. IF_ENABLED() is an intruder here because (x ? y : z) is C code, which should not be included from assembly files or linker scripts. Also, <linux/kconfig.h> is no longer self-contained because NULL is defined in <linux/stddef.h>. Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF() takes the general boolean expression instead of a CONFIG option so that it fits better in <linux/kernel.h>. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org>
2021-05-07Merge branch '40GbE' of ↵Jakub Kicinski8-62/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Nguyen, Anthony L says: ==================== Intel Wired LAN Driver Updates 2021-05-07 This series contains updates to i40e driver only. Magnus fixes XDP by adding and correcting checks that were caused by a previous commit which introduced a new variable but did not account for it in all paths. Yunjian Wang adds a return in an error path to prevent reading a freed pointer. Jaroslaw forces link reset when changing FEC so that changes take affect. Mateusz fixes PHY types for 2.5G and 5G as there is a differentiation on PHY identifiers based on operation. Arkadiusz removes filtering of LLDP frames for software DCB as this is preventing them from being properly transmitted. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Remove LLDP frame filters i40e: Fix PHY type identifiers for 2.5G and 5G adapters i40e: fix the restart auto-negotiation after FEC modified i40e: Fix use-after-free in i40e_client_subtask() i40e: fix broken XDP support ==================== Link: https://lore.kernel.org/r/20210507164151.2878147-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-07atm: firestream: Use fallthrough pseudo-keywordWei Ming Chen1-0/+1
Add pseudo-keyword macro fallthrough[1] [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com> Link: https://lore.kernel.org/r/20210507123843.10602-1-jj251510319013@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-07net: stmmac: Do not enable RX FIFO overflow interruptsYannick Vignon2-18/+3
The RX FIFO overflows when the system is not able to process all received packets and they start accumulating (first in the DMA queue in memory, then in the FIFO). An interrupt is then raised for each overflowing packet and handled in stmmac_interrupt(). This is counter-productive, since it brings the system (or more likely, one CPU core) to its knees to process the FIFO overflow interrupts. stmmac_interrupt() handles overflow interrupts by writing the rx tail ptr into the corresponding hardware register (according to the MAC spec, this has the effect of restarting the MAC DMA). However, without freeing any rx descriptors, the DMA stops right away, and another overflow interrupt is raised as the FIFO overflows again. Since the DMA is already restarted at the end of stmmac_rx_refill() after freeing descriptors, disabling FIFO overflow interrupts and the corresponding handling code has no side effect, and eliminates the interrupt storm when the RX FIFO overflows. Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Link: https://lore.kernel.org/r/20210506143312.20784-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-07Merge tag 'tag-chrome-platform-for-v5.13' of ↵Linus Torvalds4-17/+38
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros_ec_typec: - Changes around DP mode check, hard reset, tracking port change. cros_ec misc: - wilco_ec: Convert stream-like files from nonseekable to stream open - cros_usbpd_notify: Listen to EC_HSOT_EVENT_USB_MUX host event - fix format warning in cros_ec_typec" * tag 'tag-chrome-platform-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_lpc: Use DEFINE_MUTEX() for mutex lock platform/chrome: cros_usbpd_notify: Listen to EC_HOST_EVENT_USB_MUX host event platform/chrome: cros_ec_typec: Add DP mode check platform/chrome: cros_ec_typec: Handle hard reset platform/chrome: cros_ec: Add Type C hard reset platform/chrome: cros_ec_typec: Track port role platform/chrome: cros_ec_typec: fix clang -Wformat warning platform/chrome: cros_ec_typec: Check for device within remove function platform/chrome: wilco_ec: convert stream-like files from nonseekable_open -> stream_open
2021-05-07Merge tag 'i3c/for-5.13' of ↵Linus Torvalds2-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3cupdates from Alexandre Belloni: "Fix i3c_master_register error path" * tag 'i3c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: Revert "i3c master: fix missing destroy_workqueue() on error in i3c_master_register" dt-bindings: i3c: Fix silvaco,i3c-master-v1 compatible string i3c: master: svc: remove redundant assignment to cmd->read_len
2021-05-07Merge tag 'arm64-fixes' of ↵Linus Torvalds3-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull more arm64 updates from Catalin Marinas: "A mix of fixes and clean-ups that turned up too late for the first pull request: - Restore terminal stack frame records. Their previous removal caused traces which cross secondary_start_kernel to terminate one entry too late, with a spurious "0" entry. - Fix boot warning with pseudo-NMI due to the way we manipulate the PMR register. - ACPI fixes: avoid corruption of interrupt mappings on watchdog probe failure (GTDT), prevent unregistering of GIC SGIs. - Force SPARSEMEM_VMEMMAP as the only memory model, it saves with having to test all the other combinations. - Documentation fixes and updates: tagged address ABI exceptions on brk/mmap/mremap(), event stream frequency, update booting requirements on the configuration of traps" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kernel: Update the stale comment arm64: Fix the documented event stream frequency arm64: entry: always set GIC_PRIO_PSR_I_SET during entry arm64: Explicitly document boot requirements for SVE arm64: Explicitly require that FPSIMD instructions do not trap arm64: Relax booting requirements for configuration of traps arm64: cpufeatures: use min and max arm64: stacktrace: restore terminal records arm64/vdso: Discard .note.gnu.property sections in vDSO arm64: doc: Add brk/mmap/mremap() to the Tagged Address ABI Exceptions psci: Remove unneeded semicolon ACPI: irq: Prevent unregistering of GIC SGIs ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure arm64: Show three registers per line arm64: remove HAVE_DEBUG_BUGVERBOSE arm64: alternative: simplify passing alt_region arm64: Force SPARSEMEM_VMEMMAP as the only memory management model arm64: vdso32: drop -no-integrated-as flag
2021-05-07Merge tag 'block-5.13-2021-05-07' of git://git.kernel.dk/linux-blockLinus Torvalds17-160/+178
Pull block fixes from Jens Axboe: - dasd spelling fixes (Bhaskar) - Limit bio max size on multi-page bvecs to the hardware limit, to avoid overly large bio's (and hence latencies). Originally queued for the merge window, but needed a fix and was dropped from the initial pull (Changheun) - NVMe pull request (Christoph): - reset the bdev to ns head when failover (Daniel Wagner) - remove unsupported command noise (Keith Busch) - misc passthrough improvements (Kanchan Joshi) - fix controller ioctl through ns_head (Minwoo Im) - fix controller timeouts during reset (Tao Chiu) - rnbd fixes/cleanups (Gioh, Md, Dima) - Fix iov_iter re-expansion (yangerkun) * tag 'block-5.13-2021-05-07' of git://git.kernel.dk/linux-block: block: reexpand iov_iter after read/write nvmet: remove unsupported command noise nvme-multipath: reset bdev to ns head when failover nvme-pci: fix controller reset hang when racing with nvme_timeout nvme: move the fabrics queue ready check routines to core nvme: avoid memset for passthrough requests nvme: add nvme_get_ns helper nvme: fix controller ioctl through ns_head bio: limit bio max size RDMA/rtrs: fix uninitialized symbol 'cnt' s390: dasd: Mundane spelling fixes block/rnbd: Remove all likely and unlikely block/rnbd-clt: Check the return value of the function rtrs_clt_query block/rnbd: Fix style issues block/rnbd-clt: Change queue_depth type in rnbd_clt_session to size_t
2021-05-07i40e: Remove LLDP frame filtersArkadiusz Kubalewski3-44/+0
Remove filters from being setup in case of software DCB and allow the LLDP frames to be properly transmitted to the wire. It is not possible to transmit the LLDP frame out of the port, if they are filtered by control VSI. This prohibits software LLDP agent properly communicate its DCB capabilities to the neighbors. Fixes: 4b208eaa8078 ("i40e: Add init and default config of software based DCB") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07i40e: Fix PHY type identifiers for 2.5G and 5G adaptersMateusz Palczewski4-11/+10
Unlike other supported adapters, 2.5G and 5G use different PHY type identifiers for reading/writing PHY settings and for reading link status. This commit introduces separate PHY identifiers for these two operation types. Fixes: 2e45d3f4677a ("i40e: Add support for X710 B/P & SFP+ cards") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07i40e: fix the restart auto-negotiation after FEC modifiedJaroslaw Gawin1-1/+2
When FEC mode was changed the link didn't know it because the link was not reset and new parameters were not negotiated. Set a flag 'I40E_AQ_PHY_ENABLE_ATOMIC_LINK' in 'abilities' to restart the link and make it run with the new settings. Fixes: 1d96340196f1 ("i40e: Add support FEC configuration for Fortville 25G") Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07i40e: Fix use-after-free in i40e_client_subtask()Yunjian Wang1-0/+1
Currently the call to i40e_client_del_instance frees the object pf->cinst, however pf->cinst->lan_info is being accessed after the free. Fix this by adding the missing return. Addresses-Coverity: ("Read from pointer after free") Fixes: 7b0b1a6d0ac9 ("i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07i40e: fix broken XDP supportMagnus Karlsson1-6/+2
Commit 12738ac4754e ("i40e: Fix sparse errors in i40e_txrx.c") broke XDP support in the i40e driver. That commit was fixing a sparse error in the code by introducing a new variable xdp_res instead of overloading this into the skb pointer. The problem is that the code later uses the skb pointer in if statements and these where not extended to also test for the new xdp_res variable. Fix this by adding the correct tests for xdp_res in these places. The skb pointer was used to store the result of the XDP program by overloading the results in the error pointer ERR_PTR(-result). Therefore, the allocation failure test that used to only test for !skb now need to be extended to also consider !xdp_res. i40e_cleanup_headers() had a check that based on the skb value being an error pointer, i.e. a result from the XDP program != XDP_PASS, and if so start to process a new packet immediately, instead of populating skb fields and sending the skb to the stack. This check is not needed anymore, since we have added an explicit test for xdp_res being set and if so just do continue to pick the next packet from the NIC. Fixes: 12738ac4754e ("i40e: Fix sparse errors in i40e_txrx.c") Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds38-411/+11
Merge yet more updates from Andrew Morton: "This is everything else from -mm for this merge window. 90 patches. Subsystems affected by this patch series: mm (cleanups and slub), alpha, procfs, sysctl, misc, core-kernel, bitmap, lib, compat, checkpatch, epoll, isofs, nilfs2, hpfs, exit, fork, kexec, gcov, panic, delayacct, gdb, resource, selftests, async, initramfs, ipc, drivers/char, and spelling" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (90 commits) mm: fix typos in comments mm: fix typos in comments treewide: remove editor modelines and cruft ipc/sem.c: spelling fix fs: fat: fix spelling typo of values kernel/sys.c: fix typo kernel/up.c: fix typo kernel/user_namespace.c: fix typos kernel/umh.c: fix some spelling mistakes include/linux/pgtable.h: few spelling fixes mm/slab.c: fix spelling mistake "disired" -> "desired" scripts/spelling.txt: add "overflw" scripts/spelling.txt: Add "diabled" typo scripts/spelling.txt: add "overlfow" arm: print alloc free paths for address in registers mm/vmalloc: remove vwrite() mm: remove xlate_dev_kmem_ptr() drivers/char: remove /dev/kmem for good mm: fix some typos and code style problems ipc/sem.c: mundane typo fixes ...
2021-05-07treewide: remove editor modelines and cruftMasahiro Yamada26-170/+0
The section "19) Editor modelines and other cruft" in Documentation/process/coding-style.rst clearly says, "Do not include any of these in source files." I recently receive a patch to explicitly add a new one. Let's do treewide cleanups, otherwise some people follow the existing code and attempt to upstream their favoriate editor setups. It is even nicer if scripts/checkpatch.pl can check it. If we like to impose coding style in an editor-independent manner, I think editorconfig (patch [1]) is a saner solution. [1] https://lore.kernel.org/lkml/20200703073143.423557-1-danny@kdrag0n.dev/ Link: https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> [auxdisplay] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-07drivers/char: remove /dev/kmem for goodDavid Hildenbrand2-241/+0
Patch series "drivers/char: remove /dev/kmem for good". Exploring /dev/kmem and /dev/mem in the context of memory hot(un)plug and memory ballooning, I started questioning the existence of /dev/kmem. Comparing it with the /proc/kcore implementation, it does not seem to be able to deal with things like a) Pages unmapped from the direct mapping (e.g., to be used by secretmem) -> kern_addr_valid(). virt_addr_valid() is not sufficient. b) Special cases like gart aperture memory that is not to be touched -> mem_pfn_is_ram() Unless I am missing something, it's at least broken in some cases and might fault/crash the machine. Looks like its existence has been questioned before in 2005 and 2010 [1], after ~11 additional years, it might make sense to revive the discussion. CONFIG_DEVKMEM is only enabled in a single defconfig (on purpose or by mistake?). All distributions disable it: in Ubuntu it has been disabled for more than 10 years, in Debian since 2.6.31, in Fedora at least starting with FC3, in RHEL starting with RHEL4, in SUSE starting from 15sp2, and OpenSUSE has it disabled as well. 1) /dev/kmem was popular for rootkits [2] before it got disabled basically everywhere. Ubuntu documents [3] "There is no modern user of /dev/kmem any more beyond attackers using it to load kernel rootkits.". RHEL documents in a BZ [5] "it served no practical purpose other than to serve as a potential security problem or to enable binary module drivers to access structures/functions they shouldn't be touching" 2) /proc/kcore is a decent interface to have a controlled way to read kernel memory for debugging puposes. (will need some extensions to deal with memory offlining/unplug, memory ballooning, and poisoned pages, though) 3) It might be useful for corner case debugging [1]. KDB/KGDB might be a better fit, especially, to write random memory; harder to shoot yourself into the foot. 4) "Kernel Memory Editor" [4] hasn't seen any updates since 2000 and seems to be incompatible with 64bit [1]. For educational purposes, /proc/kcore might be used to monitor value updates -- or older kernels can be used. 5) It's broken on arm64, and therefore, completely disabled there. Looks like it's essentially unused and has been replaced by better suited interfaces for individual tasks (/proc/kcore, KDB/KGDB). Let's just remove it. [1] https://lwn.net/Articles/147901/ [2] https://www.linuxjournal.com/article/10505 [3] https://wiki.ubuntu.com/Security/Features#A.2Fdev.2Fkmem_disabled [4] https://sourceforge.net/projects/kme/ [5] https://bugzilla.redhat.com/show_bug.cgi?id=154796 Link: https://lkml.kernel.org/r/20210324102351.6932-1-david@redhat.com Link: https://lkml.kernel.org/r/20210324102351.6932-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Chris Zankel <chris@zankel.net> Cc: Corentin Labbe <clabbe@baylibre.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Hillf Danton <hdanton@sina.com> Cc: huang ying <huang.ying.caritas@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: James Troup <james.troup@canonical.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kairui Song <kasong@redhat.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: openrisc@lists.librecores.org Cc: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: "Pavel Machek (CIP)" <pavel@denx.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Pierre Morel <pmorel@linux.ibm.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Robert Richter <rric@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: sparclinux@vger.kernel.org Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Theodore Dubois <tblodt@icloud.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: William Cohen <wcohen@redhat.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-07init/initramfs.c: do unpacking asynchronouslyRasmus Villemoes1-0/+2
Patch series "background initramfs unpacking, and CONFIG_MODPROBE_PATH", v3. These two patches are independent, but better-together. The second is a rather trivial patch that simply allows the developer to change "/sbin/modprobe" to something else - e.g. the empty string, so that all request_module() during early boot return -ENOENT early, without even spawning a usermode helper, needlessly synchronizing with the initramfs unpacking. The first patch delegates decompressing the initramfs to a worker thread, allowing do_initcalls() in main.c to proceed to the device_ and late_ initcalls without waiting for that decompression (and populating of rootfs) to finish. Obviously, some of those later calls may rely on the initramfs being available, so I've added synchronization points in the firmware loader and usermodehelper paths - there might be other places that would need this, but so far no one has been able to think of any places I have missed. There's not much to win if most of the functionality needed during boot is only available as modules. But systems with a custom-made .config and initramfs can boot faster, partly due to utilizing more than one cpu earlier, partly by avoiding known-futile modprobe calls (which would still trigger synchronization with the initramfs unpacking, thus eliminating most of the first benefit). This patch (of 2): Most of the boot process doesn't actually need anything from the initramfs, until of course PID1 is to be executed. So instead of doing the decompressing and populating of the initramfs synchronously in populate_rootfs() itself, push that off to a worker thread. This is primarily motivated by an embedded ppc target, where unpacking even the rather modest sized initramfs takes 0.6 seconds, which is long enough that the external watchdog becomes unhappy that it doesn't get attention soon enough. By doing the initramfs decompression in a worker thread, we get to do the device_initcalls and hence start petting the watchdog much sooner. Normal desktops might benefit as well. On my mostly stock Ubuntu kernel, my initramfs is a 26M xz-compressed blob, decompressing to around 126M. That takes almost two seconds: [ 0.201454] Trying to unpack rootfs image as initramfs... [ 1.976633] Freeing initrd memory: 29416K Before this patch, these lines occur consecutively in dmesg. With this patch, the timestamps on these two lines is roughly the same as above, but with 172 lines inbetween - so more than one cpu has been kept busy doing work that would otherwise only happen after the populate_rootfs() finished. Should one of the initcalls done after rootfs_initcall time (i.e., device_ and late_ initcalls) need something from the initramfs (say, a kernel module or a firmware blob), it will simply wait for the initramfs unpacking to be done before proceeding, which should in theory make this completely safe. But if some driver pokes around in the filesystem directly and not via one of the official kernel interfaces (i.e. request_firmware*(), call_usermodehelper*) that theory may not hold - also, I certainly might have missed a spot when sprinkling wait_for_initramfs(). So there is an escape hatch in the form of an initramfs_async= command line parameter. Link: https://lkml.kernel.org/r/20210313212528.2956377-1-linux@rasmusvillemoes.dk Link: https://lkml.kernel.org/r/20210313212528.2956377-2-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-06Merge branch 'for-linus' of ↵Linus Torvalds39-413/+4137
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - three new touchscreen drivers: Hycon HY46XX, ILITEK Lego Series, and MStar MSG2638 - a new driver for Azoteq IQS626A proximity and touch controller - addition of Amazon Game Controller to the list of devices handled by the xpad driver - Elan touchscreen driver will avoid binding to devices described as I2CHID compatible in ACPI tables - various driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (56 commits) Input: xpad - add support for Amazon Game Controller Input: ili210x - add missing negation for touch indication on ili210x MAINTAINERS: repair reference in HYCON HY46XX TOUCHSCREEN SUPPORT Input: add driver for the Hycon HY46XX touchpanel series dt-bindings: touchscreen: Add HY46XX bindings dt-bindings: Add Hycon Technology vendor prefix Input: cyttsp - flag the device properly Input: cyttsp - set abs params for ABS_MT_TOUCH_MAJOR Input: cyttsp - drop the phys path Input: cyttsp - reduce reset pulse timings Input: cyttsp - error message on boot mode exit error Input: apbps2 - remove useless variable Input: mms114 - support MMS136 Input: mms114 - convert bindings to YAML and extend Input: Add support for ILITEK Lego Series dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindings Input: add MStar MSG2638 touchscreen driver dt-bindings: input/touchscreen: add bindings for msg2638 Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices ...
2021-05-07Merge tag 'amd-drm-fixes-5.13-2021-05-05' of ↵Dave Airlie14-45/+328
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-5.13-2021-05-05: amdgpu: - MPO hang workaround - Fix for concurrent VM flushes on vega/navi - dcefclk is not adjustable on navi1x and newer - MST HPD debugfs fix - Suspend/resumes fixes - Register VGA clients late in case driver fails to load - Fix GEM leak in user framebuffer create - Add support for polaris12 with 32 bit memory interface - Fix duplicate cursor issue when using overlay - Fix corruption with tiled surfaces on VCN3 - Add BO size and stride check to fix BO size verification radeon: - Fix off-by-one in power state parsing - Fix possible memory leak in power state parsing Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210506033929.3875-1-alexander.deucher@amd.com
2021-05-07Merge tag 'drm-misc-next-fixes-2021-05-06' of ↵Dave Airlie4-33/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-next Two patches, one to fix a null pointer dereference in msm, and one to fix an unused warning for in fbdev when PROCFS is disabled. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Thu 06 May 2021 22:26:35 AEST # gpg: using ? key E3EF0D6F671851C5 # gpg: Can't check signature: unknown pubkey algorithm From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210506122723.oqadel7oacazywij@gilmour
2021-05-06include: remove pagemap.h from blkdev.hMatthew Wilcox (Oracle)6-0/+6
My UEK-derived config has 1030 files depending on pagemap.h before this change. Afterwards, just 326 files need to be rebuilt when I touch pagemap.h. I think blkdev.h is probably included too widely, but untangling that dependency is harder and this solves my problem. x86 allmodconfig builds, but there may be implicit include problems on other architectures. Link: https://lkml.kernel.org/r/20210309195747.283796-1-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Dan Williams <dan.j.williams@intel.com> [nvdimm] Acked-by: Jens Axboe <axboe@kernel.dk> [block] Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: Martin K. Petersen <martin.petersen@oracle.com> [scsi] Reviewed-by: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-06proc: mandate ->proc_lseek in "struct proc_ops"Alexey Dobriyan3-0/+3
Now that proc_ops are separate from file_operations and other operations it easy to check all instances to have ->proc_lseek hook and remove check in main code. Note: nonseekable_open() files naturally don't require ->proc_lseek. Garbage collect pde_lseek() function. [adobriyan@gmail.com: smoke test lseek()] Link: https://lkml.kernel.org/r/YG4OIhChOrVTPgdN@localhost.localdomain Link: https://lkml.kernel.org/r/YFYX0Bzwxlc7aBa/@localhost.localdomain Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-07Merge tag 'drm-intel-next-fixes-2021-04-30' of ↵Dave Airlie1-3/+3
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 GVT fixes for v5.13-rc1: - Fix a possible division by zero in vgpu display rate calculation Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87wnsk16sa.fsf@intel.com
2021-05-06mlxsw: spectrum_mr: Update egress RIF list before route's actionIdo Schimmel1-15/+15
Each multicast route that is forwarding packets (as opposed to trapping them) points to a list of egress router interfaces (RIFs) through which packets are replicated. A route's action can transition from trap to forward when a RIF is created for one of the route's egress virtual interfaces (eVIF). When this happens, the route's action is first updated and only later the list of egress RIFs is committed to the device. This results in the route pointing to an invalid list. In case the list pointer is out of range (due to uninitialized memory), the device will complain: mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=5733bf490000905c,reg_id=300f(pefa),type=write,status=7(bad parameter)) Fix this by first committing the list of egress RIFs to the device and only later update the route's action. Note that a fix is not needed in the reverse function (i.e., mlxsw_sp_mr_route_evif_unresolve()), as there the route's action is first updated and only later the RIF is removed from the list. Cc: stable@vger.kernel.org Fixes: c011ec1bbfd6 ("mlxsw: spectrum: Add the multicast routing offloading logic") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20210506072308.3834303-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-06net: ipa: fix inter-EE IRQ register definitionsAlex Elder2-11/+11
In gsi_irq_setup(), two registers are written with the intention of disabling inter-EE channel and event IRQs. But the wrong registers are used (and defined); the ones used are read-only registers that indicate whether the interrupt condition is present. Define the mask registers instead of the status registers, and use them to disable the inter-EE interrupt types. Fixes: 46f748ccaf01 ("net: ipa: explicitly disallow inter-EE interrupts") Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20210505223636.232527-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-06Input: xpad - add support for Amazon Game ControllerMatt Reynolds1-0/+2
The Amazon Luna controller (product name "Amazon Game Controller") behaves like an Xbox 360 controller when connected over USB. Signed-off-by: Matt Reynolds <mattreynolds@chromium.org> Reviewed-by: Harry Cutts <hcutts@chromium.org> Link: https://lore.kernel.org/r/20210429103548.1.If5f9a44cb81e25b9350f7c6c0b3c88b4ecd81166@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-06Input: ili210x - add missing negation for touch indication on ili210xHansem Ro1-1/+1
This adds the negation needed for proper finger detection on Ilitek ili2107/ili210x. This fixes polling issues (on Amazon Kindle Fire) caused by returning false for the cooresponding finger on the touchscreen. Signed-off-by: Hansem Ro <hansemro@outlook.com> Fixes: e3559442afd2a ("ili210x - rework the touchscreen sample processing") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-06Merge tag 's390-5.13-2' of ↵Linus Torvalds2-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: - add support for system call stack randomization - handle stale PCI deconfiguration events - couple of defconfig updates - some fixes and cleanups * tag 's390-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix detection of vector enhancements facility 1 vs. vector packed decimal facility s390/entry: add support for syscall stack randomization s390/configs: change CONFIG_VIRTIO_CONSOLE to "m" s390/cio: remove invalid condition on IO_SCH_UNREG s390/cpumf: remove call to perf_event_update_userpage s390/cpumf: move counter set size calculation to common place s390/cpumf: beautify if-then-else indentation s390/configs: enable CONFIG_PCI_IOV s390/pci: handle stale deconfiguration events s390/pci: rename zpci_configure_device()
2021-05-06Merge branch 'pcmcia-next' of ↵Linus Torvalds5-32/+30
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux Pull pcmcia updates from Dominik Brodowski: "A number of patches fixing W=1 kernel build warnings, and one patch removing an always-false NULL check" * 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: pcmcia: rsrc_nonstatic: Fix call-back function as reference formatting pcmcia: pcmcia_resource: Fix some kernel-doc formatting/disparities and demote others pcmcia: ds: Fix function name disparity in header pcmcia: pcmcia_cis: Demote non-conforming kernel-doc headers to standard kernel-doc pcmcia: cistpl: Demote non-conformant kernel-doc headers to standard comments pcmcia: rsrc_nonstatic: Demote kernel-doc abuses pcmcia: ds: Remove if with always false condition
2021-05-06Merge tag 'acpi-5.13-rc1-2' of ↵Linus Torvalds5-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert one recent commit that turned out to be problematic, address two issues in the ACPI "custom method" interface and update GPIO properties documentation. Specifics: - Revent recent commit related to the handling of ACPI power resources during initialization, because it turned out to cause problems to occur on some systems (Rafael Wysocki). - Fix potential use-after-free and potential memory leak in the ACPI "custom method" debugfs interface (Mark Langsdorf). - Update ACPI GPIO properties documentation to cover assumptions regarding GPIO polarity (Andy Shevchenko)" * tag 'acpi-5.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI: scan: Turn off unused power resources during initialization" ACPI: custom_method: fix a possible memory leak ACPI: custom_method: fix potential use-after-free issue Documentation: firmware-guide: gpio-properties: Add note to SPI CS case
2021-05-06Merge tag 'devicetree-fixes-for-5.13-1' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Several Renesas binding fixes to fix warnings - Remove duplicate compatibles in 8250 binding - Remove orphaned Sigma Designs Tango bindings - Fix bcm2711-hdmi binding to use 'additionalProperties' - Fix idt,32434-pic warning for missing 'interrupts' property - Fix 'stored but not read' warnings in DT overlay code * tag 'devicetree-fixes-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: net: renesas,etheravb: Fix optional second clock name dt-bindings: display: renesas,du: Add missing power-domains property dt-bindings: media: renesas,vin: Make resets optional on R-Car Gen1 dt-bindings: PCI: rcar-pci-host: Document missing R-Car H1 support of: overlay: Remove redundant assignment to ret dt-bindings: serial: 8250: Remove duplicated compatible strings dt-bindings: Remove unused Sigma Designs Tango bindings dt-bindings: bcm2711-hdmi: Fix broken schema dt-bindings: interrupt-controller: idt,32434-pic: Add missing interrupts property
2021-05-06Merge branches 'acpi-pm' and 'acpi-docs'Rafael J. Wysocki4-4/+2
* acpi-pm: Revert "ACPI: scan: Turn off unused power resources during initialization" * acpi-docs: Documentation: firmware-guide: gpio-properties: Add note to SPI CS case
2021-05-06can: m_can: m_can_tx_work_queue(): fix tx_skb race conditionMarc Kleine-Budde1-1/+2
The m_can_start_xmit() function checks if the cdev->tx_skb is NULL and returns with NETDEV_TX_BUSY in case tx_sbk is not NULL. There is a race condition in the m_can_tx_work_queue(), where first the skb is send to the driver and then the case tx_sbk is set to NULL. A TX complete IRQ might come in between and wake the queue, which results in tx_skb not being cleared yet. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Tested-by: Torin Cooper-Bennun <torin@maxiluxsystems.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-06can: mcp251x: fix resume from sleep before interface was brought upFrieder Schrempf1-17/+18
Since 8ce8c0abcba3 the driver queues work via priv->restart_work when resuming after suspend, even when the interface was not previously enabled. This causes a null dereference error as the workqueue is only allocated and initialized in mcp251x_open(). To fix this we move the workqueue init to mcp251x_can_probe() as there is no reason to do it later and repeat it whenever mcp251x_open() is called. Fixes: 8ce8c0abcba3 ("can: mcp251x: only reset hardware as required") Link: https://lore.kernel.org/r/17d5d714-b468-482f-f37a-482e3d6df84e@kontron.de Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [mkl: fix error handling in mcp251x_stop()] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-06can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error ↵Marc Kleine-Budde1-1/+3
path This patch adds the missing can_rx_offload_del(), that must be called if mcp251xfd_register() fails. Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Link: https://lore.kernel.org/r/20210504091838.1109047-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-06can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probeDan Carpenter1-2/+2
When we converted this code to use dev_err_probe() we accidentally removed a return. It means that if devm_clk_get() it will lead to an Oops when we call clk_get_rate() on the next line. Fixes: cf8ee6de2543 ("can: mcp251xfd: mcp251xfd_probe(): use dev_err_probe() to simplify error handling") Link: https://lore.kernel.org/r/YJANZf13Qxd5Mhr1@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-05-05drm/amdgpu: Use device specific BO size & stride check.Bas Nieuwenhuizen1-6/+175
The builtin size check isn't really the right thing for AMD modifiers due to a couple of reasons: 1) In the format structs we don't do set any of the tilesize / blocks etc. to avoid having format arrays per modifier/GPU 2) The pitch on the main plane is pixel_pitch * bytes_per_pixel even for tiled ... 3) The pitch for the DCC planes is really the pixel pitch of the main surface that would be covered by it ... Note that we only handle GFX9+ case but we do this after converting the implicit modifier to an explicit modifier, so on GFX9+ all framebuffers should be checked here. There is a TODO about DCC alignment, but it isn't worse than before and I'd need to dig a bunch into the specifics. Getting this out in a reasonable timeframe to make sure it gets the appropriate testing seemed more important. Finally as I've found that debugging addfb2 failures is a pita I was generous adding explicit error messages to every failure case. Fixes: f258907fdd83 ("drm/amdgpu: Verify bo size can fit framebuffer size on init.") Tested-by: Simon Ser <contact@emersion.fr> Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-05drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.Bas Nieuwenhuizen1-0/+4
Otherwise tiling modes that require the values form this field (In particular _*_X) would be corrupted upon video decode. Copied from the VCN v2 code. Fixes: 99541f392b4d ("drm/amdgpu: add mc resume DPG mode for VCN3.0") Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com> Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-05-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-17/+89
Merge more updates from Andrew Morton: "The remainder of the main mm/ queue. 143 patches. Subsystems affected by this patch series (all mm): pagecache, hugetlb, userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap, kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and kfence" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits) kfence: use power-efficient work queue to run delayed work kfence: maximize allocation wait timeout duration kfence: await for allocation using wait_event kfence: zero guard page after out-of-bounds access mm/process_vm_access.c: remove duplicate include mm/mempool: minor coding style tweaks mm/highmem.c: fix coding style issue btrfs: use memzero_page() instead of open coded kmap pattern iov_iter: lift memzero_page() to highmem.h mm/zsmalloc: use BUG_ON instead of if condition followed by BUG. mm/zswap.c: switch from strlcpy to strscpy arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE mm,memory_hotplug: add kernel boot option to enable memmap_on_memory acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported mm,memory_hotplug: allocate memmap from the added memory range mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count() mm,memory_hotplug: relax fully spanned sections check drivers/base/memory: introduce memory_block_{online,offline} mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove ...
2021-05-05Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds20-145/+1250
Pull virtio updates from Michael Tsirkin: "A bunch of new drivers including vdpa support for block and virtio-vdpa. Beginning of vq kick (aka doorbell) mapping support. Misc fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (40 commits) virtio_pci_modern: correct sparse tags for notify virtio_pci_modern: __force cast the notify mapping vDPA/ifcvf: get_config_size should return dev specific config size vDPA/ifcvf: enable Intel C5000X-PL virtio-block for vDPA vDPA/ifcvf: deduce VIRTIO device ID when probe vdpa_sim_blk: add support for vdpa management tool vdpa_sim_blk: handle VIRTIO_BLK_T_GET_ID vdpa_sim_blk: implement ramdisk behaviour vdpa: add vdpa simulator for block device vhost/vdpa: Remove the restriction that only supports virtio-net devices vhost/vdpa: use get_config_size callback in vhost_vdpa_config_validate() vdpa: add get_config_size callback in vdpa_config_ops vdpa_sim: cleanup kiovs in vdpasim_free() vringh: add vringh_kiov_length() helper vringh: implement vringh_kiov_advance() vringh: explain more about cleaning riov and wiov vringh: reset kiov 'consumed' field in __vringh_iov() vringh: add 'iotlb_lock' to synchronize iotlb accesses vdpa_sim: use iova module to allocate IOVA addresses vDPA/ifcvf: deduce VIRTIO device ID from pdev ids ...
2021-05-05Merge tag 'pci-v5.13-changes' of ↵Linus Torvalds73-1188/+2557
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Release OF node when pci_scan_device() fails (Dmitry Baryshkov) - Add pci_disable_parity() (Bjorn Helgaas) - Disable Mellanox Tavor parity reporting (Heiner Kallweit) - Disable N2100 r8169 parity reporting (Heiner Kallweit) - Fix RCiEP device to RCEC association (Qiuxu Zhuo) - Convert sysfs "config", "rom", "reset", "label", "index", "acpi_index" to static attributes to help fix races in device enumeration (Krzysztof Wilczyński) - Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof Wilczyński) - Use sysfs_emit() in "show" functions (Krzysztof Wilczyński) - Remove unused alloc_pci_root_info() return value (Krzysztof Wilczyński) PCI device hotplug: - Fix acpiphp reference count leak (Feilong Lin) Power management: - Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki) - Fix runtime PM imbalance (Dinghao Liu) Virtualization: - Increase delay after FLR to work around Intel DC P4510 NVMe erratum (Raphael Norwitz) MSI: - Convert rcar, tegra, xilinx to MSI domains (Marc Zyngier) - For rcar, xilinx, use controller address as MSI doorbell (Marc Zyngier) - Remove unused hv msi_controller struct (Marc Zyngier) - Remove unused PCI core msi_controller support (Marc Zyngier) - Remove struct msi_controller altogether (Marc Zyngier) - Remove unused default_teardown_msi_irqs() (Marc Zyngier) - Let host bridges declare their reliance on MSI domains (Marc Zyngier) - Make pci_host_common_probe() declare its reliance on MSI domains (Marc Zyngier) - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner) - Document ways of ending up with NO_MSI (Marc Zyngier) - Refactor HT advertising of NO_MSI flag (Marc Zyngier) VPD: - Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner Kallweit) - Remove sysfs VPD size checking dead code (Heiner Kallweit) - Convert VPF sysfs file to static attribute (Heiner Kallweit) - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit) - Tone down "missing VPD" message (Heiner Kallweit) Endpoint framework: - Fix NULL pointer dereference when epc_features not implemented (Shradha Todi) - Add missing destroy_workqueue() in endpoint test (Yang Yingliang) Amazon Annapurna Labs PCIe controller driver: - Fix compile testing without CONFIG_PCI_ECAM (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) APM X-Gene PCIe controller driver: - Fix cfg resource mapping regression (Dejin Zheng) Broadcom iProc PCIe controller driver: - Return zero for success of iproc_msi_irq_domain_alloc() (Pali Rohár) Broadcom STB PCIe controller driver: - Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim Quinlan) - Fix use of BCM7216 reset controller (Jim Quinlan) - Use reset/rearm for Broadcom STB pulse reset instead of deassert/assert (Jim Quinlan) - Fix brcm_pcie_probe() error return for unsupported revision (Wei Yongjun) Cavium ThunderX PCIe controller driver: - Fix compile testing (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) Freescale Layerscape PCIe controller driver: - Fix ls_pcie_ep_probe() syntax error (comma for semicolon) (Krzysztof Wilczyński) - Remove layerscape-gen4 dependencies on OF and ARM64, add dependency on ARCH_LAYERSCAPE (Geert Uytterhoeven) HiSilicon HIP PCIe controller driver: - Remove obsolete HiSilicon PCIe DT description (Dongdong Liu) Intel Gateway PCIe controller driver: - Remove unused pcie_app_rd() (Jiapeng Chong) Intel VMD host bridge driver: - Program IRTE with Requester ID of VMD endpoint, not child device (Jon Derrick) - Disable VMD MSI-X remapping when possible so children can use more MSI-X vectors (Jon Derrick) MediaTek PCIe controller driver: - Configure FC and FTS for functions other than 0 (Ryder Lee) - Add YAML schema for MediaTek (Jianjun Wang) - Export pci_pio_to_address() for module use (Jianjun Wang) - Add MediaTek MT8192 PCIe controller driver (Jianjun Wang) - Add MediaTek MT8192 INTx support (Jianjun Wang) - Add MediaTek MT8192 MSI support (Jianjun Wang) - Add MediaTek MT8192 system power management support (Jianjun Wang) - Add missing MODULE_DEVICE_TABLE (Qiheng Lin) Microchip PolarFlare PCIe controller driver: - Make several symbols static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar) - Make several symbols const (Rikard Falkeborn) - Fix Kconfig host/endpoint typo (Wesley Sheng) SiFive FU740 PCIe controller driver: - Add pcie_aux clock to prci driver (Greentime Hu) - Use reset-simple in prci driver for PCIe (Greentime Hu) - Add SiFive FU740 PCIe host controller driver and DT binding (Paul Walmsley, Greentime Hu) Synopsys DesignWare PCIe controller driver: - Move MSI Receiver init to dw_pcie_host_init() so it is re-initialized along with the RC in resume (Jisheng Zhang) - Move iATU detection earlier to fix regression (Hou Zhiqiang) TI J721E PCIe driver: - Add DT binding and TI j721e support for refclk to PCIe connector (Kishon Vijay Abraham I) - Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon Vijay Abraham I) TI Keystone PCIe controller driver: - Use generic config accessors for TI AM65x (K3) to fix regression (Kishon Vijay Abraham I) Xilinx NWL PCIe controller driver: - Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar Gogada) - Add optional "dma-coherent" DT property (Bharat Kumar Gogada) Miscellaneous: - Fix kernel-doc warnings (Krzysztof Wilczyński) - Remove unused MicroGate SyncLink device IDs (Jiri Slaby) - Remove redundant dev_err() for devm_ioremap_resource() failure (Chen Hui) - Remove redundant initialization (Colin Ian King) - Drop redundant dev_err() for platform_get_irq() errors (Krzysztof Wilczyński)" * tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (98 commits) riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC PCI: fu740: Add SiFive FU740 PCIe host controller driver dt-bindings: PCI: Add SiFive FU740 PCIe host controller MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver clk: sifive: Use reset-simple in prci driver for PCIe driver clk: sifive: Add pcie_aux clock in prci driver for PCIe driver PCI: brcmstb: Use reset/rearm instead of deassert/assert ata: ahci_brcm: Fix use of BCM7216 reset controller reset: add missing empty function reset_control_rearm() PCI: Allow VPD access for QLogic ISP2722 PCI/VPD: Add helper pci_get_func0_dev() PCI/VPD: Remove pci_vpd_find_tag() SRDT handling PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument PCI/VPD: Change pci_vpd_init() return type to void PCI/VPD: Make missing VPD message less alarming PCI/VPD: Remove pci_set_vpd_size() x86/PCI: Remove unused alloc_pci_root_info() return value MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer PCI: mediatek-gen3: Add system PM support PCI: mediatek-gen3: Add MSI support ...
2021-05-05Merge tag 'pwm/for-5.13-rc1' of ↵Linus Torvalds58-349/+466
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This adds support for the PWM controller found on Toshiba Visconti SoCs and converts a couple of drivers to the atomic API. There's also a bunch of cleanups and minor fixes across the board" * tag 'pwm/for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (35 commits) pwm: Reword docs about pwm_apply_state() pwm: atmel: Improve duty cycle calculation in .apply() pwm: atmel: Fix duty cycle calculation in .get_state() pwm: visconti: Add Toshiba Visconti SoC PWM support dt-bindings: pwm: Add bindings for Toshiba Visconti PWM Controller arm64: dts: rockchip: Remove clock-names from PWM nodes ARM: dts: rockchip: Remove clock-names from PWM nodes dt-bindings: pwm: rockchip: Add more compatible strings dt-bindings: pwm: Convert pwm-rockchip.txt to YAML pwm: mediatek: Remove unused function pwm: pca9685: Improve runtime PM behavior pwm: pca9685: Support hardware readout pwm: pca9685: Switch to atomic API pwm: lpss: Don't modify HW state in .remove callback pwm: sti: Free resources only after pwmchip_remove() pwm: sti: Don't modify HW state in .remove callback pwm: lpc3200: Don't modify HW state in .remove callback pwm: lpc18xx-sct: Free resources only after pwmchip_remove() pwm: bcm-kona: Don't modify HW state in .remove callback pwm: bcm2835: Free resources only after pwmchip_remove() ...
2021-05-05Merge tag 'thermal-v5.13-rc1' of ↵Linus Torvalds29-374/+709
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Remove duplicate error message for the amlogic driver (Tang Bin) - Fix spellos in comments for the tegra and sun8i (Bhaskar Chowdhury) - Add the missing fifth node on the rcar_gen3 sensor (Niklas Söderlund) - Remove duplicate include in ti-bandgap (Zhang Yunkai) - Assign error code in the error path in the function thermal_of_populate_bind_params() (Jia-Ju Bai) - Fix spelling mistake in a comment 'disabed' -> 'disabled' (Colin Ian King) - Use the device name instead of auto-numbering for a better identification of the cooling device (Daniel Lezcano) - Improve a bit the division accuracy in the power allocator governor (Jeson Gao) - Enable the missing third sensor on msm8976 (Konrad Dybcio) - Add QCom tsens driver co-maintainer (Thara Gopinath) - Fix memory leak and use after free errors in the core code (Daniel Lezcano) - Add the MDM9607 compatible bindings (Konrad Dybcio) - Fix trivial spello in the copyright name for Hisilicon (Hao Fang) - Fix negative index array access when converting the frequency to power in the energy model (Brian-sy Yang) - Add support for Gen2 new PMIC support for Qcom SPMI (David Collins) - Update maintainer file for CPU cooling device section (Lukasz Luba) - Fix missing put_device on error in the Qcom tsens driver (Guangqing Zhu) - Add compatible DT binding for sm8350 (Robert Foss) - Add support for the MDM9607's tsens driver (Konrad Dybcio) - Remove duplicate error messages in thermal_mmio and the bcm2835 driver (Ruiqi Gong) - Add the Thermal Temperature Cooling driver (Zhang Rui) - Remove duplicate error messages in the Hisilicon sensor driver (Ye Bin) - Use the devm_platform_ioremap_resource_byname() function instead of a couple of corresponding calls (dingsenjie) - Sort the headers alphabetically in the ti-bandgap driver (Zhen Lei) - Add missing property in the DT thermal sensor binding (Rafał Miłecki) - Remove dead code in the ti-bandgap sensor driver (Lin Ruizhe) - Convert the BRCM DT bindings to the yaml schema (Rafał Miłecki) - Replace the thermal_notify_framework() call by a call to the thermal_zone_device_update() function. Remove the function as well as the corresponding documentation (Thara Gopinath) - Add support for the ipq8064-tsens sensor along with a set of cleanups and code preparation (Ansuel Smith) - Add a lockless __thermal_cdev_update() function to improve the locking scheme in the core code and governors (Lukasz Luba) - Fix multiple cooling device notification changes (Lukasz Luba) - Remove unneeded variable initialization (Colin Ian King) * tag 'thermal-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (55 commits) thermal/drivers/mtk_thermal: Remove redundant initializations of several variables thermal/core/power allocator: Use the lockless __thermal_cdev_update() function thermal/core/fair share: Use the lockless __thermal_cdev_update() function thermal/core/fair share: Lock the thermal zone while looping over instances thermal/core/power_allocator: Update once cooling devices when temp is low thermal/core/power_allocator: Maintain the device statistics from going stale thermal/core: Create a helper __thermal_cdev_update() without a lock dt-bindings: thermal: tsens: Document ipq8064 bindings thermal/drivers/tsens: Add support for ipq8064-tsens thermal/drivers/tsens: Drop unused define for msm8960 thermal/drivers/tsens: Replace custom 8960 apis with generic apis thermal/drivers/tsens: Fix bug in sensor enable for msm8960 thermal/drivers/tsens: Use init_common for msm8960 thermal/drivers/tsens: Add VER_0 tsens version thermal/drivers/tsens: Convert msm8960 to reg_field thermal/drivers/tsens: Don't hardcode sensor slope Documentation: driver-api: thermal: Remove thermal_notify_framework from documentation thermal/core: Remove thermal_notify_framework iwlwifi: mvm: tt: Replace thermal_notify_framework dt-bindings: thermal: brcm,ns-thermal: Convert to the json-schema ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 13:53:43 +0000