summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)AuthorFilesLines
2023-11-10Merge tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds3-322/+0
Pull MIPS updates from Thomas Bogendoerfer: - removed AR7 platform support - cleanups and fixes * tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: AR7: remove platform watchdog: ar7_wdt: remove driver to prepare for platform removal vlynq: remove bus driver mtd: parsers: ar7: remove support serial: 8250: remove AR7 support arch: mips: remove ReiserFS from defconfig MIPS: lantiq: Remove unnecessary include of <linux/of_irq.h> MIPS: lantiq: Fix pcibios_plat_dev_init() "no previous prototype" warning MIPS: KVM: Fix a build warning about variable set but not used MIPS: Remove dead code in relocate_new_kernel mips: dts: ralink: mt7621: rename to GnuBee GB-PC1 and GnuBee GB-PC2 mips: dts: ralink: mt7621: define each reset as an item mips: dts: ingenic: Remove unneeded probe-type properties MIPS: loongson32: Remove dma.h and nand.h
2023-11-09Merge tag 'linux-watchdog-6.7-rc1' of ↵Linus Torvalds16-79/+123
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add support for Amlogic C3 and S4 SoCs - add IT8613 ID - add MSM8226 and MSM8974 compatibles - other small fixes and improvements * tag 'linux-watchdog-6.7-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits) dt-bindings: watchdog: Add support for Amlogic C3 and S4 SoCs watchdog: mlx-wdt: Parameter desctiption warning fix watchdog: aspeed: Add support for aspeed,reset-mask DT property dt-bindings: watchdog: aspeed-wdt: Add aspeed,reset-mask property watchdog: apple: Deactivate on suspend dt-bindings: watchdog: qcom-wdt: Add MSM8226 and MSM8974 compatibles dt-bindings: watchdog: fsl-imx7ulp-wdt: Add 'fsl,ext-reset-output' wdog: imx7ulp: Enable wdog int_en bit for watchdog any reset drivers: watchdog: marvell_gti: Program the max_hw_heartbeat_ms drivers: watchdog: marvell_gti: fix zero pretimeout handling watchdog: marvell_gti: Replace of_platform.h with explicit includes watchdog: imx_sc_wdt: continue if the wdog already enabled watchdog: st_lpc: Use device_get_match_data() watchdog: wdat_wdt: Add timeout value as a param in ping method watchdog: gpio_wdt: Make use of device properties sbsa_gwdt: Calculate timeout with 64-bit math watchdog: ixp4xx: Make sure restart always works watchdog: it87_wdt: add IT8613 ID watchdog: marvell_gti_wdt: Fix error code in probe() Watchdog: marvell_gti_wdt: Remove redundant dev_err_probe() for platform_get_irq() ...
2023-10-29watchdog: mlx-wdt: Parameter desctiption warning fixMichael Shych1-0/+1
Add parameter desription to fix warning. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310241044.lvqeOGli-lkp@intel.com Signed-off-by: Michael Shych <michaelsh@nvidia.com> Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231026082558.12142-1-michaelsh@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-29watchdog: aspeed: Add support for aspeed,reset-mask DT propertyZev Weiss1-0/+11
This property allows the device-tree to specify how the Aspeed watchdog timer's reset mask register(s) should be set, so that peripherals can be individually exempted from (or opted in to) being reset when the watchdog timer expires. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230922104231.1434-6-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-29watchdog: apple: Deactivate on suspendJanne Grunau1-0/+25
The watchdog remains active after putting the system into suspend. Add PM callbacks to deactivate the watchdog on suspend an re-activate it on resume. Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231016-apple-watchdog-suspend-v2-1-7ffff8042dbc@jannau.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-29wdog: imx7ulp: Enable wdog int_en bit for watchdog any resetJacky Bai1-0/+8
The wdog INT_EN bit in CS register should be set to '1' to trigger WDOG_ANY external reset on i.MX93. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231010081909.2899101-1-ping.bai@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-29drivers: watchdog: marvell_gti: Program the max_hw_heartbeat_msGeorge Cherian1-0/+1
Program the max_hw_heartbeat_ms value so that the watchdog_pretimeout worker is activated. This kernel worker thread makes sure to ping the watchdog in case the userspace is unable to do so. This kernel worker ping will be done only till the full watchdog timeout there by maintaining the watchdog functionality in case of a real hang. Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231009044037.514570-2-bbhushan2@marvell.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-29drivers: watchdog: marvell_gti: fix zero pretimeout handlingBharat Bhushan1-0/+7
When pretimeout is set to 0 then do not reprogram timer with zero timeout, this will reset device immediately. Also disable interrupt to stop pretimeout notification. Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231009044037.514570-1-bbhushan2@marvell.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-29watchdog: marvell_gti: Replace of_platform.h with explicit includesRob Herring1-1/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other and pull in various other headers. In preparation to fix this, adjust the includes for what is actually needed. of_platform.h isn't needed, but of.h was implicitly included by it (via of_device.h). Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231010205636.1584480-1-robh@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-29watchdog: imx_sc_wdt: continue if the wdog already enabledJacky Bai1-1/+4
if the wdog is already enabled, and try to enabled it again, we should ignore the error and continue, rather than return error. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231010074626.2787383-1-ping.bai@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-29watchdog: st_lpc: Use device_get_match_data()Rob Herring1-9/+2
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231009211356.3242037-18-robh@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-29watchdog: wdat_wdt: Add timeout value as a param in ping methodXing Tong Wu1-1/+1
According to the WDAT spec that states about WATCHDOG_ACTION_SET_COUNTDOWN_PERIOD: "This action is required if WATCHDOG_ACTION_RESET does not explicitly write a new countdown value to a register during a reset." And that implies, WATCHDOG_ACTION_RESET may write a countdown value, thus may come with a WATCHDOG_INSTRUCTION_WRITE_COUNTDOWN, thus need the timeout value as parameter or would otherwise write 0. The watchdog for SIONCT6126 need a entry WATCHDOG_INSTRUCTION_WRITE_COUNTDOWN for WATCHDOG_ACTION_RESET action, I send this patch to support it. Signed-off-by: Xing Tong Wu <xingtong.wu@siemens.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231007082125.4699-1-xingtong_wu@163.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-29watchdog: gpio_wdt: Make use of device propertiesAndy Shevchenko1-9/+7
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Include mod_devicetable.h explicitly to replace the dropped of.h which included mod_devicetable.h indirectly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230925123543.2945710-1-andriy.shevchenko@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-29sbsa_gwdt: Calculate timeout with 64-bit mathDarren Hart1-2/+2
Commit abd3ac7902fb ("watchdog: sbsa: Support architecture version 1") introduced new timer math for watchdog revision 1 with the 48 bit offset register. The gwdt->clk and timeout are u32, but the argument being calculated is u64. Without a cast, the compiler performs u32 operations, truncating intermediate steps, resulting in incorrect values. A watchdog revision 1 implementation with a gwdt->clk of 1GHz and a timeout of 600s writes 3647256576 to the one shot watchdog instead of 300000000000, resulting in the watchdog firing in 3.6s instead of 600s. Force u64 math by casting the first argument (gwdt->clk) as a u64. Make the order of operations explicit with parenthesis. Fixes: abd3ac7902fb ("watchdog: sbsa: Support architecture version 1") Reported-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com> Signed-off-by: Darren Hart <darren@os.amperecomputing.com> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: <stable@vger.kernel.org> # 5.14.x Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/7d1713c5ffab19b0f3de796d82df19e8b1f340de.1695286124.git.darren@os.amperecomputing.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-29watchdog: ixp4xx: Make sure restart always worksLinus Walleij1-3/+25
The IXP4xx watchdog in early "A0" silicon is unreliable and cannot be registered, however for some systems such as the USRobotics USR8200 the watchdog is the only restart option, so implement a "dummy" watchdog that can only support restart in this case. Fixes: 1aea522809e6 ("watchdog: ixp4xx: Implement restart") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230926-ixp4xx-wdt-restart-v2-1-15cf4639b423@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-29watchdog: it87_wdt: add IT8613 IDWerner Fischer1-3/+5
This patch adds watchdog support for the ITE IT8613 watchdog. IT8613 watchdog works in the same way as the other watchdogs supported by it87_wdt. Before this patch, IT8613 watchdog is not supported. After a modprobe, dmesg reports: it87_wdt: Unknown Chip found, Chip 8613 Revision 000c With this patch, modprobe it87_wdt recognizes the watchdog as the dmesg output shows: it87_wdt: Chip IT8613 revision 12 initialized. timeout=60 sec (nowayout=0 testmode=0) Watchdog tests on a LES v4 have been successful, the watchdog works as expected with this patch [1]. [1] https://www.thomas-krenn.com/en/wiki/Watchdog#LES_v4 Signed-off-by: Werner Fischer <devlists@wefi.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/3bc0a1c2d768b23a0cd6e9f5fa0c0b5577427668.camel@wefi.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-29watchdog: marvell_gti_wdt: Fix error code in probe()Dan Carpenter1-1/+1
This error path accidentally returns success. Return -EINVAL instead. Fixes: ef9e7fe2c890 ("Watchdog: Add marvell GTI watchdog driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Bharat Bhushan <bbhushan2@marvell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/af326fd7-ac71-43a1-b7de-81779b61d242@moroto.mountain Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-19watchdog: ar7_wdt: remove driver to prepare for platform removalWolfram Sang3-322/+0
AR7 is going to be removed from the Kernel, so remove its watchdog support. This allows us to remove the platform because this driver includes a platform specific header. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-10-11Watchdog: marvell_gti_wdt: Remove redundant dev_err_probe() for ↵Jinjie Ruan1-1/+1
platform_get_irq() Since commit 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()"), there is no need to call the dev_err_probe() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Fixes: ef9e7fe2c890 ("Watchdog: Add marvell GTI watchdog driver") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230901070929.1317982-1-ruanjinjie@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-11watchdog: of_xilinx_wdt: Remove unnecessary clock disable call in the remove ↵Srinivas Neeli1-3/+10
path There is a mismatch in axi clock enable and disable calls. The axi clock is enabled and disabled by the probe function, then it is again disabled in the remove path. So observed the call trace while removing the module. Use the clk_enable() and devm_clk_get_prepared() functions instead of devm_clk_get_enable() to avoid an extra clock disable call from the remove path. Call trace: clk_core_disable+0xb0/0xc0 clk_disable+0x30/0x4c clk_disable_unprepare+0x18/0x30 devm_clk_release+0x24/0x40 devres_release_all+0xc8/0x190 device_unbind_cleanup+0x18/0x6c device_release_driver_internal+0x20c/0x250 device_release_driver+0x18/0x24 bus_remove_device+0x124/0x130 device_del+0x174/0x440 Fixes: b6bc41645547 ("watchdog: of_xilinx_wdt: Add support for reading freq via CCF") Signed-off-by: Srinivas Neeli <srinivas.neeli@amd.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230901070929.1317982-1-ruanjinjie@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-11watchdog: sunplus: Use the devm_clk_get_enabled() helper functionJinjie Ruan1-15/+2
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code and avoids the need of a dedicated function used with devm_add_action_or_reset(). Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230824135514.2661364-4-ruanjinjie@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-11watchdog: ath79_wdt: Use the devm_clk_get_enabled() helper functionJinjie Ruan1-15/+4
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230824135514.2661364-3-ruanjinjie@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-10-11watchdog: at91sam9_wdt: Use the devm_clk_get_enabled() helper functionJinjie Ruan1-15/+5
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230824135514.2661364-2-ruanjinjie@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-09-11arch: Remove Itanium (IA-64) architectureArd Biesheuvel1-1/+1
The Itanium architecture is obsolete, and an informal survey [0] reveals that any residual use of Itanium hardware in production is mostly HP-UX or OpenVMS based. The use of Linux on Itanium appears to be limited to enthusiasts that occasionally boot a fresh Linux kernel to see whether things are still working as intended, and perhaps to churn out some distro packages that are rarely used in practice. None of the original companies behind Itanium still produce or support any hardware or software for the architecture, and it is listed as 'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers that contributed on behalf of those companies (nor anyone else, for that matter) have been willing to support or maintain the architecture upstream or even be responsible for applying the odd fix. The Intel firmware team removed all IA-64 support from the Tianocore/EDK2 reference implementation of EFI in 2018. (Itanium is the original architecture for which EFI was developed, and the way Linux supports it deviates significantly from other architectures.) Some distros, such as Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have dropped support years ago. While the argument is being made [1] that there is a 'for the common good' angle to being able to build and run existing projects such as the Grid Community Toolkit [2] on Itanium for interoperability testing, the fact remains that none of those projects are known to be deployed on Linux/ia64, and very few people actually have access to such a system in the first place. Even if there were ways imaginable in which Linux/ia64 could be put to good use today, what matters is whether anyone is actually doing that, and this does not appear to be the case. There are no emulators widely available, and so boot testing Itanium is generally infeasible for ordinary contributors. GCC still supports IA-64 but its compile farm [3] no longer has any IA-64 machines. GLIBC would like to get rid of IA-64 [4] too because it would permit some overdue code cleanups. In summary, the benefits to the ecosystem of having IA-64 be part of it are mostly theoretical, whereas the maintenance overhead of keeping it supported is real. So let's rip off the band aid, and remove the IA-64 arch code entirely. This follows the timeline proposed by the Debian/ia64 maintainer [5], which removes support in a controlled manner, leaving IA-64 in a known good state in the most recent LTS release. Other projects will follow once the kernel support is removed. [0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/ [1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/ [2] https://gridcf.org/gct-docs/latest/index.html [3] https://cfarm.tetaneutral.net/machines/list/ [4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/ [5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/ Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-09-06Merge tag 'linux-watchdog-6.6-rc1' of ↵Linus Torvalds37-100/+513
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add marvell GTI watchdog driver - add support for Amlogic-T7 SoCs - document the IPQ5018 watchdog compatible - enable COMPILE_TEST for more watchdog device drivers - core: stop watchdog when executing poweroff command - other small improvements and fixes * tag 'linux-watchdog-6.6-rc1' of git://www.linux-watchdog.org/linux-watchdog: (21 commits) watchdog: Add support for Amlogic-T7 SoCs watchdog: Add a new struct for Amlogic-GXBB driver dt-bindings: watchdog: Add support for Amlogic-T7 SoCs dt-bindings: watchdog: qcom-wdt: document IPQ5018 watchdog: imx2_wdt: Improve dev_crit() message watchdog: stm32: Drop unnecessary of_match_ptr() watchdog: sama5d4: readout initial state watchdog: intel-mid_wdt: add MODULE_ALIAS() to allow auto-load watchdog: core: stop watchdog when executing poweroff command watchdog: pm8916_wdt: Remove redundant of_match_ptr() watchdog: xilinx_wwdt: Use div_u64() in xilinx_wwdt_start() watchdog: starfive: Remove #ifdef guards for PM related functions watchdog: s3c2410: Fix potential deadlock on &wdt->lock watchdog:rit_wdt: Add support for WDIOF_CARDRESET dt-bindings: watchdog: ti,rti-wdt: Add support for WDIOF_CARDRESET watchdog: Enable COMPILE_TEST for more drivers watchdog: advantech_ec_wdt: fix Kconfig dependencies watchdog: Explicitly include correct DT includes Watchdog: Add marvell GTI watchdog driver dt-bindings: watchdog: marvell GTI system watchdog driver ...
2023-08-25watchdog: Add support for Amlogic-T7 SoCsHuqiang Qin1-0/+5
Compared with the previous Amlogic-GXBB, the watchdog of Amlogic-T7 has a different reset enable bit. Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com> Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230802033222.4024946-4-huqiang.qin@amlogic.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-25watchdog: Add a new struct for Amlogic-GXBB driverHuqiang Qin1-3/+13
Add a new structure wdt_params to describe the watchdog difference of different chips. Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com> Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230802033222.4024946-3-huqiang.qin@amlogic.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-25watchdog: imx2_wdt: Improve dev_crit() messageFabio Estevam1-1/+1
After issuing a "poweroff" command the board goes through the expected power-off sequence and turns it off completely: systemd-shutdown[1]: Powering off. imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot! reboot: Power down The "Expect reboot!" message is misleading because in the power-off case, no reboot is expected to happen at all. Avoid the confusion by removing the "Expect reboot!" message. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230822135255.1013981-1-festevam@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-25watchdog: stm32: Drop unnecessary of_match_ptr()Rob Herring1-1/+1
With COMPILE_TEST recently enabled, 0-day reports a warning: drivers/watchdog/stm32_iwdg.c:215:34: warning: 'stm32_iwdg_of_match' defined but not used [-Wunused-const-variable=] As STM32 platforms are always used with DT, drop the of_match_ptr(). Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308211837.4VBSUAtZ-lkp@intel.com/ Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230823151059.2356881-1-robh@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-23watchdog: simatic: Use idiomatic selection of P2SBAndy Shevchenko1-1/+1
While it's pretty much theoretical to be otherwise, make sure that P2SB is selected only for X86. This is idiomatic dependency which is used by all others who select it. Use it for Simatic as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230822141859.2139630-1-andriy.shevchenko@linux.intel.com Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-08-19watchdog: sama5d4: readout initial stateMathieu Othacehe1-0/+7
Readout the AT91_WDT_MR bit at probe so that it becomes possible to get the pre-userspace handler working. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230819084726.11037-1-othacehe@gnu.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-19watchdog: intel-mid_wdt: add MODULE_ALIAS() to allow auto-loadRaag Jadav1-0/+1
When built with CONFIG_INTEL_MID_WATCHDOG=m, currently the driver needs to be loaded manually, for the lack of module alias. This causes unintended resets in cases where watchdog timer is set-up by bootloader and the driver is not explicitly loaded. Add MODULE_ALIAS() to load the driver automatically at boot and avoid this issue. Fixes: 87a1ef8058d9 ("watchdog: add Intel MID watchdog driver support") Signed-off-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230811120220.31578-1-raag.jadav@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-19watchdog: core: stop watchdog when executing poweroff commandMeng Li1-1/+1
On some platforms, for example, Intel SoC FPGA platform, the watchdog is started in u-boot, and so kernel will create a timer and work to keep watchdog alive. But when user executes commands "poweroff" or "shutdown -h", the system is reset when watchdog triggers timeout even if WDOG_STOP_ON_REBOOT is set in watchdog driver. The root cause is that the watchdog is not stopped properly because the SYS_POWER_OFF case is not supported in notify callback function. So, add this case to stop watchdog when executing poweroff command. Signed-off-by: Meng Li <Meng.Li@windriver.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230814090616.1853263-1-Meng.Li@windriver.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-19watchdog: pm8916_wdt: Remove redundant of_match_ptr()Ruan Jinjie1-1/+1
The driver depends on CONFIG_OF, it is not necessary to use of_match_ptr() here. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230811062707.2301583-1-ruanjinjie@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-19watchdog: xilinx_wwdt: Use div_u64() in xilinx_wwdt_start()Nathan Chancellor1-1/+2
After commit f1a43aadb5a6 ("watchdog: Enable COMPILE_TEST for more drivers"), it is possible to enable this driver on 32-bit architectures. When building for those architectures with clang, there is an error due to a 64-bit division in xilinx_wwdt_start(): ERROR: modpost: "__aeabi_uldivmod" [drivers/watchdog/xilinx_wwdt.ko] undefined! Use div_u64() to fix this, which takes a 64-bit dividend and 32-bit divisor. GCC likely avoids the same error due to optimizations it employs to transform division by a constant into other equivalent operations, which may be different than what is implemented in clang. Link: https://github.com/ClangBuiltLinux/linux/issues/1915 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230815-watchdog-xilinx-div_u64-v1-1-20b0b5a65c2e@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-19watchdog: starfive: Remove #ifdef guards for PM related functionsPaul Cercueil1-7/+3
Use the new PM macros for the suspend and resume functions to be automatically dropped by the compiler when CONFIG_PM or CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards. This has the advantage of always compiling these functions in, independently of any Kconfig option. Thanks to that, bugs and other regressions are subsequently easier to catch. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230706082928.10869-1-paul@crapouillou.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-19watchdog: s3c2410: Fix potential deadlock on &wdt->lockChengfeng Ye1-6/+9
As &wdt->lock is acquired by hard irq s3c2410wdt_irq(), other acquisition of the same lock under process context should disable irq, otherwise deadlock could happen if the irq preempt the execution while the lock is held in process context on the same CPU. [Deadlock Scenario] s3c2410wdt_suspend() -> s3c2410wdt_stop() -> spin_lock(&wdt->lock) <irq iterrupt> -> s3c2410wdt_irq() -> s3c2410wdt_keepalive() -> spin_lock(&wdt->lock) (deadlock here) [Deadlock Scenario] s3c2410wdt_probe() -> s3c2410wdt_start() -> spin_lock(&wdt->lock) <irq iterrupt> -> s3c2410wdt_irq() -> s3c2410wdt_keepalive() -> spin_lock(&wdt->lock) (deadlock here) [Deadlock Scenario] s3c2410wdt_keepalive() -> spin_lock(&wdt->lock) <irq iterrupt> -> s3c2410wdt_irq() -> s3c2410wdt_keepalive() -> spin_lock(&wdt->lock) (deadlock here) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock, which reported the above warning when analyzing the linux kernel 6.4-rc7 release. The tentative patch fix the potential deadlock by spin_lock_irqsave() under process context. Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230705090951.63762-1-dg573847474@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-19watchdog:rit_wdt: Add support for WDIOF_CARDRESETLi Hua Qian1-0/+48
This patch adds the WDIOF_CARDRESET support for the platform watchdog whose hardware does not support this feature, to know if the board reboot is due to a watchdog reset. This is done via reserved memory(RAM), which indicates if specific info saved, triggering the watchdog reset in last boot. Signed-off-by: Li Hua Qian <huaqian.li@siemens.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230718021007.1338761-4-huaqian.li@siemens.com [groeck: vaddr == NULL --> !vaddr] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-14watchdog: simatic: add PCI dependencyArnd Bergmann1-1/+1
The simatic-ipc driver no longer depends on PCI, but its watchdog portion still needs it, otherwise P2SB runs into a build failure: WARNING: unmet direct dependencies detected for P2SB Depends on [n]: PCI [=n] && X86 [=y] Selected by [m]: - SIEMENS_SIMATIC_IPC_WDT [=m] && WATCHDOG [=y] && SIEMENS_SIMATIC_IPC [=y] drivers/platform/x86/p2sb.c:121:3: error: call to undeclared function 'pci_bus_write_config_dword'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] pci_bus_write_config_dword(bus, devfn_p2sb, P2SBC, 0); Add back the minimum dependendency to make it build in random configurations again. Fixes: b72da71ce24b ("platform/x86: simatic-ipc: drop PCI runtime depends and header") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230814073924.1066390-1-arnd@kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-08-13watchdog: Enable COMPILE_TEST for more driversRob Herring2-40/+41
There's quite a few watchdog drivers which are easily enabled for COMPILE_TEST, so let's enable them. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230728195022.1198555-1-robh@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-13watchdog: advantech_ec_wdt: fix Kconfig dependenciesFlorent CARLI1-0/+2
This driver uses the WATCHDOG_CORE framework and ISA_BUS_API. This commit has these dependencies correctly selected. Signed-off-by: Florent CARLI <fcarli@gmail.com> Co-authored-by: Yoann Congal <yoann.congal@smile.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230721081347.52069-1-fcarli@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-13watchdog: Explicitly include correct DT includesRob Herring27-38/+24
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230726233302.3812749-1-robh@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-13Watchdog: Add marvell GTI watchdog driverBharat Bhushan3-0/+354
This patch add support for Marvell GTI watchdog. Global timer unit (GTI) support hardware watchdog timer. Software programs watchdog timer to generate interrupt on first timeout, second timeout is configured to be ignored and system reboots on third timeout. Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230803032523.6242-2-bbhushan2@marvell.com [groeck: MODULE_LICENSE GPL v2 -> GPL since that is sufficient] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-13watchdog: menz069_wdt: Remove redundant initialization owner in men_z069_driverLi Zetao1-1/+0
The module_mcb_driver() will set "THIS_MODULE" to driver.owner when register a mcb_driver driver, so it is redundant initialization to set driver.owner in men_z069_driver statement. Remove it for clean code. Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230804100617.100251-1-lizetao1@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-07-31watchdog: make Siemens Simatic watchdog driver default on platformHenning Schild1-0/+1
If a user did choose to enable Siemens Simatic platform support they likely want that driver to be enabled without having to flip more config switches. So we make the watchdog driver config switch default to the platform driver switches value. Signed-off-by: Henning Schild <henning.schild@siemens.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230719153518.13073-2-henning.schild@siemens.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-14watchdog: simatic-ipc-wdt: make IO region access of one model muxedHenning Schild1-3/+6
The IO region used for the watchdog also hold CMOS battery monitoring information. Make the access muxed so that a hwmon driver can use the region as well. Signed-off-by: Henning Schild <henning.schild@siemens.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230706154831.19100-2-henning.schild@siemens.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-06-26watchdog: sp5100_tco: support Hygon FCH/SCH (Server Controller Hub)Yuechao Zhao1-1/+3
Add PCI_VENDOR_ID_HYGON(Hygon vendor id [0x1d94]) in this driver Signed-off-by: Yuechao Zhao <yuechao.zhao@advantech.com.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20230612031907.796461-1-a345351830@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-06-26watchdog: xilinx_wwdt: Add Versal window watchdog supportSrinivas Neeli3-0/+220
Versal watchdog driver uses window watchdog mode. Window watchdog timer(WWDT) contains closed(first) and open(second) window with 32 bit width. Write to the watchdog timer within predefined window periods of time. This means a period that is not too soon and a period that is not too late. The WWDT has to be restarted within the open window time. If software tries to restart WWDT outside of the open window time period, it generates a reset. Signed-off-by: Srinivas Neeli <srinivas.neeli@amd.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20230420104231.2243079-4-srinivas.neeli@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-06-26watchdog: ziirave_wdt: Switch i2c driver back to use .probe()Uwe Kleine-König1-1/+1
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20230525210837.735447-1-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-06-26watchdog: ibmasr: Replace GPL license notice with SPDX identifierBagas Sanjaya1-2/+1
Replace unversioned GPL license notice with appropriate SPDX license identifier, which is GPL 1.0+. Cc: Andrey Panin <pazke@donpac.ru> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20230517072140.1086660-3-bagasdotme@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 04:48:02 +0000