summaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)AuthorFilesLines
2023-11-03Merge tag 'usb-6.7-rc1' of ↵Linus Torvalds14-268/+635
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1. Nothing really major in here, just lots of constant development for new hardware. Included in here are: - Thunderbolt (i.e. USB4) fixes for reported issues and support for new hardware types and devices - USB typec additions of new drivers and cleanups for some existing ones - xhci cleanups and expanded tracing support and some platform specific updates - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi, and i2c drivers for that type of device (all acked by the respective subsystem maintainers.) - lots of USB gadget driver updates and cleanups - new USB dwc3 platforms supported, as well as other dwc3 fixes and cleanups - USB chipidea driver updates - other smaller driver cleanups and additions, full details in the shortlog All of these have been in the linux-next tree for a while with no reported problems" * tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) usb: gadget: uvc: Add missing initialization of ssp config descriptor usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility usb: raw-gadget: report suspend, resume, reset, and disconnect events usb: raw-gadget: don't disable device if usb_ep_queue fails usb: raw-gadget: properly handle interrupted requests usb:cdnsp: remove TRB_FLUSH_ENDPOINT command usb: gadget: aspeed_udc: Convert to platform remove callback returning void dt-bindings: usb: fsa4480: Add compatible for OCP96011 usb: typec: fsa4480: Add support to swap SBU orientation dt-bindings: usb: fsa4480: Add data-lanes property to endpoint usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller" Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport" thunderbolt: Fix one kernel-doc comment usb: gadget: f_ncm: Always set current gadget in ncm_bind() usb: core: Remove duplicated check in usb_hub_create_port_device usb: typec: tcpm: Add additional checks for contaminant arm64: dts: rockchip: rk3588s: Add USB3 host controller usb: dwc3: add optional PHY interface clocks dt-bindings: usb: add rk3588 compatible to rockchip,dwc3 ...
2023-10-30Merge tag 'hardening-v6.7-rc1' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "One of the more voluminous set of changes is for adding the new __counted_by annotation[1] to gain run-time bounds checking of dynamically sized arrays with UBSan. - Add LKDTM test for stuck CPUs (Mark Rutland) - Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo) - Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva) - Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh) - Convert group_info.usage to refcount_t (Elena Reshetova) - Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva) - Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn) - Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook) - Fix strtomem() compile-time check for small sources (Kees Cook)" * tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits) hwmon: (acpi_power_meter) replace open-coded kmemdup_nul reset: Annotate struct reset_control_array with __counted_by kexec: Annotate struct crash_mem with __counted_by virtio_console: Annotate struct port_buffer with __counted_by ima: Add __counted_by for struct modsig and use struct_size() MAINTAINERS: Include stackleak paths in hardening entry string: Adjust strtomem() logic to allow for smaller sources hardening: x86: drop reference to removed config AMD_IOMMU_V2 randstruct: Fix gcc-plugin performance mode to stay in group mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by irqchip/imx-intmux: Annotate struct intmux_data with __counted_by KVM: Annotate struct kvm_irq_routing_table with __counted_by virt: acrn: Annotate struct vm_memory_region_batch with __counted_by hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by sparc: Annotate struct cpuinfo_tree with __counted_by isdn: kcapi: replace deprecated strncpy with strscpy_pad isdn: replace deprecated strncpy with strscpy NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by ...
2023-10-21usb: host: xhci: Avoid XHCI resume delay if SSUSB device is not presentWesley Cheng1-2/+10
There is a 120ms delay implemented for allowing the XHCI host controller to detect a U3 wakeup pulse. The intention is to wait for the device to retry the wakeup event if the USB3 PORTSC doesn't reflect the RESUME link status by the time it is checked. As per the USB3 specification: tU3WakeupRetryDelay ("Table 7-12. LTSSM State Transition Timeouts") This would allow the XHCI resume sequence to determine if the root hub needs to be also resumed. However, in case there is no device connected, or if there is only a HSUSB device connected, this delay would still affect the overall resume timing. Since this delay is solely for detecting U3 wake events (USB3 specific) then ignore this delay for the disconnected case and the HSUSB connected only case. [skip helper function, rename usb3_connected variable -Mathias ] Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-20-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21usb: host: xhci-plat: fix possible kernel oops while resumingSergey Shtylyov1-4/+19
If this driver enables the xHC clocks while resuming from sleep, it calls clk_prepare_enable() without checking for errors and blithely goes on to read/write the xHC's registers -- which, with the xHC not being clocked, at least on ARM32 usually causes an imprecise external abort exceptions which cause kernel oops. Currently, the chips for which the driver does the clock dance on suspend/resume seem to be the Broadcom STB SoCs, based on ARM32 CPUs, as it seems... Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. Fixes: 8bd954c56197 ("usb: host: xhci-plat: suspend and resume clocks") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-19-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21usb: xhci: Implement xhci_handshake_check_state() helperUdipto Goswami3-3/+30
In some situations where xhci removal happens parallel to xhci_handshake, we encounter a scenario where the xhci_handshake can't succeed, and it polls until timeout. If xhci_handshake runs until timeout it can on some platforms result in a long wait which might lead to a watchdog timeout. Add a helper that checks xhci status during the handshake, and exits if set state is entered. Use this helper in places where xhci_handshake is called unlocked and has a long timeout. For example xhci command timeout and xhci reset. [commit message and code comment rewording -Mathias] Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-18-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: split free interrupter into separate remove and free partsMathias Nyman1-11/+21
The current function that both removes and frees an interrupter isn't optimal when using several interrupters. The array of interrupters need to be protected with a lock while removing interrupters, but the default xhci spin lock can't be used while freeing the interrupters event ring segment table as dma_free_coherent() should be called with IRQs enabled. There is no need to free the interrupter under the lock, so split this code into separate unlocked free part, and a lock protected remove part. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-17-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: Enable RPM on controllers that support low-power statesBasavaraj Natikar1-1/+3
Use the low-power states of the underlying platform to enable runtime PM. If the platform doesn't support runtime D3, then enabling default RPM will result in the controller malfunctioning, as in the case of hotplug devices not being detected because of a failed interrupt generation. Cc: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-16-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: Loosen RPM as default policy to cover for AMD xHC 1.1Basavaraj Natikar1-0/+2
The AMD USB host controller (1022:43f7) isn't going into PCI D3 by default without anything connected. This is because the policy that was introduced by commit a611bf473d1f ("xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices") only covered 1.2 or later. The 1.1 specification also has the same requirement as the 1.2 specification for D3 support. So expand the runtime PM as default policy to all AMD 1.1 devices as well. Fixes: a611bf473d1f ("xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices") Link: https://composter.com.ua/documents/xHCI_Specification_for_USB.pdf Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-15-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: Simplify event ring dequeue pointer update for port change eventsMathias Nyman1-8/+2
Increase the event ring dequeue pointer for port change events in the same way as other event types. No need to handle it separately. This only touches the driver side tracking of event ring dequeue. Note: this does move forward the event ring dequeue increase for port change events a bit. Previously the dequeue was increased before temporarily dropping the xhci lock while kicking roothub polling. Now dequeue is increased after re-aquiring the lock. This should not matter as event ring dequeue is not touched at all by hub thread. It's only touched in xhci interrupt handler. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-14-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: simplify event ring dequeue tracking for transfer eventsMathias Nyman1-11/+1
No matter what type of event we receive we want to increase the event ring dequeue pointer one step for every event that is handled. For unknown reasons the event ring dequeue increase is done inside the transfer event handler and port event handler. As the transfer event handler got more complex and can now loop through several transfer TRBs on a transfer ring, there were additinal checks added to avoid increasing event ring dequeue more than one step. No need for elaborate checks to avoid increasing event ring dequeue in case the transfer event handler goes through a loop. Just increasing the event ring dequeue outside the transfer event handler. End goal is to increase event ring dequeue in just one place. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-13-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: Clean up xhci_{alloc,free}_erst() declarationsLukas Wunner2-6/+1
xhci_alloc_erst() has global scope even though it's only used in xhci-mem.c. Declare it static. xhci_free_erst() was removed by commit b17a57f89f69 ("xhci: Refactor interrupter code for initial multi interrupter support."), but a declaration in xhci.h still remains. Drop it. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-12-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: Clean up stale comment on ERST_SIZE macroLukas Wunner1-6/+1
Commit ebd88cf50729 ("xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES") removed the ERST_SIZE macro but retained a code comment explaining the quantity chosen in the macro. Remove the code comment as well. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-11-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: Clean up ERST_PTR_MASK inversionLukas Wunner4-7/+5
Mathias notes that the ERST_PTR_MASK macro is named as if it's masking the Event Ring Dequeue Pointer in the ERDP register, but in actuality it's masking the inverse. Invert the macro's value for clarity. Migrate it to the modern GENMASK_ULL() syntax to avoid u64 casts. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-10-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: Expose segment numbers in debugfsLukas Wunner1-1/+1
Ring segments have just been amended with a monotonically increasing number. To allow developers to inspect the segment numbers and ensure correctness in particular after ring expansion, expose them in each ring's "trbs" file in debugfs. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-9-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: Update last segment pointer after Event Ring expansionLukas Wunner1-5/+7
When expanding a ring at its "end", ring->last_seg needs to be updated for Event Rings as well, not just for all the other ring types. This is not a fix because ring expansion currently isn't done on the Event Ring. It's just in preparation for when it's added. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: Adjust segment numbers after ring expansionLukas Wunner1-6/+10
Initial xhci_ring allocation has just been amended to assign a monotonically increasing number to each ring segment. However rings may be expanded after initial allocation. So number newly inserted segments starting from the preceding segment in the ring and renumber all segments succeeding the newly inserted ones. This is not a fix because ring expansion currently isn't done on the Event Ring and that's the only ring type using the segment number. It's just in preparation for when either Event Ring expansion is added or when other ring types start making use of the segment number. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: Use more than one Event Ring segmentJonathan Bell2-5/+10
Users have reported log spam created by "Event Ring Full" xHC event TRBs. These are caused by interrupt latency in conjunction with a very busy set of devices on the bus. The errors are benign, but throughput will suffer as the xHC will pause processing of transfers until the Event Ring is drained by the kernel. Commit dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose") mitigated the issue by advancing the Event Ring Dequeue Pointer already after half a segment has been processed. Nevertheless, providing a larger Event Ring would be useful to cope with load peaks. Expand the number of event TRB slots available by increasing the number of Event Ring segments in the ERST. Controllers have a hardware-defined limit as to the number of ERST entries they can process, but with up to 32k it can be excessively high (sec 5.3.4). So cap the actual number at 2 (configurable through the ERST_MAX_SEGS macro), which seems like a reasonable quantity. It is supported by any xHC because the limit in the HCSPARAMS2 register is defined as a power of 2. Renesas uPD720201 and VIA VL805 controllers do not support more than 2 ERST entries. An alternative to increasing the number of Event Ring segments would be an increase of the segment size. But that requires allocating multiple contiguous pages, which may be impossible if memory is fragmented. Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: Set DESI bits in ERDP register correctlyLukas Wunner3-15/+13
When using more than one Event Ring segment (ERSTSZ > 1), software shall set the DESI bits in the ERDP register to the number of the segment to which the upper ERDP bits are pointing. The xHC may use the DESI bits as a shortcut to determine whether it needs to check for an Event Ring Full condition: If it's enqueueing events in a different segment, it need not compare its internal Enqueue Pointer with the Dequeue Pointer in the upper bits of the ERDP register (sec 5.5.2.3.3). Not setting the DESI bits correctly can result in the xHC enqueueing events past the Dequeue Pointer. On Renesas uPD720201 host controllers, incorrect DESI bits cause an interrupt storm. For comparison, VIA VL805 host controllers do not exhibit such problems. Perhaps they do not take advantage of the optimization afforded by the DESI bits. To fix the issue, assign the segment number to each struct xhci_segment in xhci_segment_alloc(). When advancing the Dequeue Pointer in xhci_update_erst_dequeue(), write the segment number to the DESI bits. On driver probe, set the DESI bits to zero in xhci_set_hc_event_deq() as processing starts in segment 0. Likewise on driver teardown, clear the DESI bits to zero in xhci_free_interrupter() when clearing the upper bits of the ERDP register. Previously those functions (incorrectly) treated the DESI bits as if they're declared RsvdP. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: expand next_trb() helper to support more ring typesMathias Nyman1-1/+1
The next_trb() helper relies on a link TRB at the end of a ring segment to know a segment ends. This works well with transfer rings that use link trbs, but not with event rings. Event rings segments are always filled by host to segment size before moving to next segment. It does not use link TRBs Check for both link trb and full segment in next_trb() helper to support event rings. Useful if several interrupters with several event rings are supported. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: Add busnumber to port tracingMathias Nyman1-1/+4
With several xhci controllers active at the same time its hard to keep track of ports without knowing bus number Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21xhci: pass port structure to tracing instead of port numberMathias Nyman3-12/+12
We want to trace other port structure members than just port number so pass entire port structure as parameter instead of just port number. Dig the port number from the port structure. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16Merge 6.6-rc6 into usb-nextGreg Kroah-Hartman4-19/+22
We need the USB and Thunderbolt fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-02usb: Annotate struct urb_priv with __counted_byKees Cook2-2/+2
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct urb_priv. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20230915195812.never.371-kees@kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2023-10-02xhci: Preserve RsvdP bits in ERSTBA register correctlyLukas Wunner2-3/+3
xhci_add_interrupter() erroneously preserves only the lowest 4 bits when writing the ERSTBA register, not the lowest 6 bits. Fix it. Migrate the ERST_BASE_RSVDP macro to the modern GENMASK_ULL() syntax to avoid a u64 cast. This was previously fixed by commit 8c1cbec9db1a ("xhci: fix event ring segment table related masks and variables in header"), but immediately undone by commit b17a57f89f69 ("xhci: Refactor interrupter code for initial multi interrupter support."). Fixes: b17a57f89f69 ("xhci: Refactor interrupter code for initial multi interrupter support.") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v6.3+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-02xhci: Clear EHB bit only at end of interrupt handlerLukas Wunner1-5/+7
The Event Handler Busy bit shall be cleared by software when the Event Ring is empty. The xHC is thereby informed that it may raise another interrupt once it has enqueued new events (sec 4.17.2). However since commit dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose"), the EHB bit is already cleared after half a segment has been processed. As a result, spurious interrupts may occur: - xhci_irq() processes half a segment, clears EHB, continues processing remaining events. - xHC enqueues new events. Because EHB has been cleared, xHC sets Interrupt Pending bit. Interrupt moderation countdown begins. - Meanwhile xhci_irq() continues processing events. Interrupt moderation countdown reaches zero, so an MSI interrupt is signaled. - xhci_irq() empties the Event Ring, clears EHB again and is done. - Because an MSI interrupt has been signaled, xhci_irq() is run again. It discovers there's nothing to do and returns IRQ_NONE. Avoid by clearing the EHB bit only at the end of xhci_irq(). Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v5.5+ Cc: Peter Chen <peter.chen@kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-02xhci: track port suspend state correctly in unsuccessful resume casesMathias Nyman1-9/+10
xhci-hub.c tracks suspended ports in a suspended_port bitfield. This is checked when responding to a Get_Status(PORT) request to see if a port in running U0 state was recently resumed, and adds the required USB_PORT_STAT_C_SUSPEND change bit in those cases. The suspended_port bit was left uncleared if a device is disconnected during suspend. The bit remained set even when a new device was connected and enumerated. The set bit resulted in a incorrect Get_Status(PORT) response with a bogus USB_PORT_STAT_C_SUSPEND change bit set once the new device reached U0 link state. USB_PORT_STAT_C_SUSPEND change bit is only used for USB2 ports, but xhci-hub keeps track of both USB2 and USB3 suspended ports. Cc: stable@vger.kernel.org Reported-by: Wesley Cheng <quic_wcheng@quicinc.com> Closes: https://lore.kernel.org/linux-usb/d68aa806-b26a-0e43-42fb-b8067325e967@quicinc.com/ Fixes: 1d5810b6923c ("xhci: Rework port suspend structures for limited ports.") Tested-by: Wesley Cheng <quic_wcheng@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-02usb: xhci: xhci-ring: Use sysdev for mapping bounce bufferWesley Cheng1-2/+2
As mentioned in: commit 474ed23a6257 ("xhci: align the last trb before link if it is easily splittable.") A bounce buffer is utilized for ensuring that transfers that span across ring segments are aligned to the EP's max packet size. However, the device that is used to map the DMA buffer to is currently using the XHCI HCD, which does not carry any DMA operations in certain configrations. Migration to using the sysdev entry was introduced for DWC3 based implementations where the IOMMU operations are present. Replace the reference to the controller device to sysdev instead. This allows the bounce buffer to be properly mapped to any implementations that have an IOMMU involved. cc: stable@vger.kernel.org Fixes: 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-02usb: xhci-mtk: improve split scheduling by separate IN/OUT budgetChunfeng Yun2-40/+278
Calculate the IN/OUT budget separately to improve the bandwidth schedule, meanwhile should avoid Start-Split token overlap between IN and OUT endpoints, and take into account the FS/LS bandwidth boundary in each microframe and also in each FS frame. Calculate the budget for SS of OUT eps and CS of IN eps, but not include extra-cs, and always add at most extra-cs allowed. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20230830122820.18859-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-02usb: xhci-mtk: add a bandwidth budget tableChunfeng Yun2-32/+85
In order to estimate when fs/ls transactions appear on a downstream bus, the host must calculate a best case full-speed budget, use a table to track how many bytes occure in each microframe. This patch is prepared for introducing an improved bandwidth scheduling. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20230830122820.18859-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-02usb: pci-quirks: handle HAS_IOPORT dependency for UHCI handoffNiklas Schnelle1-7/+16
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. With the AMD quirk handled USB PCI quirks still use inw() in uhci_check_and_reset_hc() and thus indirectly in quirk_usb_handoff_uhci(). Handle this by conditionally compiling uhci_check_and_reset_hc() and stubbing out quirk_usb_handoff_uhci() when HAS_IOPORT is not available. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230911125653.1393895-4-schnelle@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-02usb: pci-quirks: handle HAS_IOPORT dependency for AMD quirkNiklas Schnelle2-8/+24
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. In the pci-quirks case the I/O port acceses are used in the quirks for several AMD south bridges, Add a config option for the AMD quirks to depend on HAS_IOPORT and #ifdef the quirk code. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230911125653.1393895-3-schnelle@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-02usb: pci-quirks: group AMD specific quirk code togetherNiklas Schnelle2-65/+68
A follow on patch will introduce CONFIG_USB_PCI_AMD governing the AMD quirk and adding its compile time dependency on HAS_IOPORT. In order to minimize the number of #ifdefs in C files and make that patch easier to read first group the code together. This is pure code movement no functional change is intended. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230911125653.1393895-2-schnelle@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-02usb: xhci: Move extcaps related macros to respective header fileKrishna Kurapati2-27/+27
DWC3 driver needs access to XHCI Extended Capabilities registers to read number of usb2 ports and usb3 ports present on multiport controller. Since the extcaps header is sufficient to parse this info, move port_count related macros and structure from xhci.h to xhci-ext-caps.h. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Link: https://lore.kernel.org/r/20230828133033.11988-4-quic_kriskura@quicinc.com Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-01Merge tag 'tty-6.6-rc1' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.6-rc1. Lots of cleanups in here this cycle, and some driver updates. Short summary is: - Jiri's continued work to make the tty code and apis be a bit more sane with regards to modern kernel coding style and types - cpm_uart driver updates - n_gsm updates and fixes - meson driver updates - sc16is7xx driver updates - 8250 driver updates for different hardware types - qcom-geni driver fixes - tegra serial driver change - stm32 driver updates - synclink_gt driver cleanups - tty structure size reduction All of these have been in linux-next this week with no reported issues. The last bit of cleanups from Jiri and the tty structure size reduction came in last week, a bit late but as they were just style changes and size reductions, I figured they should get into this merge cycle so that others can work on top of them with no merge conflicts" * tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) tty: shrink the size of struct tty_struct by 40 bytes tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw() tty: n_tty: extract ECHO_OP processing to a separate function tty: n_tty: unify counts to size_t tty: n_tty: use u8 for chars and flags tty: n_tty: simplify chars_in_buffer() tty: n_tty: remove unsigned char casts from character constants tty: n_tty: move newline handling to a separate function tty: n_tty: move canon handling to a separate function tty: n_tty: use MASK() for masking out size bits tty: n_tty: make n_tty_data::num_overrun unsigned tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun() tty: n_tty: use 'num' for writes' counts tty: n_tty: use output character directly tty: n_tty: make flow of n_tty_receive_buf_common() a bool Revert "tty: serial: meson: Add a earlycon for the T7 SoC" Documentation: devices.txt: Fix minors for ttyCPM* Documentation: devices.txt: Remove ttySIOC* Documentation: devices.txt: Remove ttyIOC* serial: 8250_bcm7271: improve bcm7271 8250 port ...
2023-08-12usb: host: ehci-sched: try to turn on io watchdog as long as periodic_count > 0Xu Yang1-1/+2
If initially isoc_count = 0, periodic_count > 0 and the io watchdog is not started (e.g. just timed out), then the io watchdog may not run after submitting isoc urbs and enable_periodic(). The isoc urbs may not complete forever if the controller had already stopped periodic schedule. This will try to call turn_on_io_watchdog() for each enable_periodic() to ensure the io watchdog functions properly. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230809065327.952368-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-12USB: ohci-sm501: remove unnecessary check of memYang Yingliang1-2/+1
The resource is checked in probe function, so there is no need do this check in remove function. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230809085348.2761782-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11tty: make tty_operations::write()'s count size_tJiri Slaby (SUSE)1-1/+2
Unify with the rest of the code. Use size_t for counts and ssize_t for retval. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230810091510.13006-30-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11tty: propagate u8 data to tty_operations::put_char()Jiri Slaby (SUSE)1-1/+1
Data are now typed as u8. Propagate this change to tty_operations::put_char(). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Mathias Nyman <mathias.nyman@intel.com> Link: https://lore.kernel.org/r/20230810091510.13006-29-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11tty: propagate u8 data to tty_operations::write()Jiri Slaby (SUSE)1-3/+1
Data are now typed as u8. Propagate this change to tty_operations::write(). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Scott Branden <scott.branden@broadcom.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: David Lin <dtwlin@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Cc: Oliver Neukum <oneukum@suse.com> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Link: https://lore.kernel.org/r/20230810091510.13006-28-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-09USB: Remove remnants of Wireless USB and UWBAlan Stern2-12/+2
Wireless USB has long been defunct, and kernel support for it was removed in 2020 by commit caa6772db4c1 ("Staging: remove wusbcore and UWB from the kernel tree."). Nevertheless, some vestiges of the old implementation still clutter up the USB subsystem and one or two other places. Let's get rid of them once and for all. The only parts still left are the user-facing APIs in include/uapi/linux/usb/ch9.h. (There are also a couple of misleading instances, such as the Sierra Wireless USB modem, which is a USB modem made by Sierra Wireless.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/b4f2710f-a2de-4fb0-b50f-76776f3a961b@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-09usb: ehci: add workaround for chipidea PORTSC.PEC bugXu Yang3-3/+25
Some NXP processor using chipidea IP has a bug when frame babble is detected. As per 4.15.1.1.1 Serial Bus Babble: A babble condition also exists if IN transaction is in progress at High-speed SOF2 point. This is called frame babble. The host controller must disable the port to which the frame babble is detected. The USB controller has disabled the port (PE cleared) and has asserted USBERRINT when frame babble is detected, but PEC is not asserted. Therefore, the SW isn't aware that port has been disabled. Then the SW keeps sending packets to this port, but all of the transfers will fail. This workaround will firstly assert PCD by SW when USBERRINT is detected and then judge whether port change has really occurred or not by polling roothub status. Because the PEC doesn't get asserted in our case, this patch will also assert it by SW when specific conditions are satisfied. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230809024432.535160-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04usb: host: Do not check for 0 return after calling platform_get_irq()Ruan Jinjie4-8/+8
It is not possible for platform_get_irq() to return 0. Use the return value from platform_get_irq(). Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Justin Chen <justin.chen@broadcom.com> Link: https://lore.kernel.org/r/20230802031236.2272196-1-ruanjinjie@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-31Merge 6.5-rc4 into usb-nextGreg Kroah-Hartman4-31/+7
We need the USB fixes in here for testing and for other patches to be applied on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-30usb: ohci-at91: Fix the unhandle interrupt when resumeGuiting Shen1-1/+7
The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when suspend which will let the ohci_irq() skip the interrupt after resume. And nobody to handle this interrupt. According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset when resume from suspend(MEM) to fix by setting "hibernated" argument of ohci_resume(). Signed-off-by: Guiting Shen <aarongt.shen@gmail.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230728120648.5878-1-aarongt.shen@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27usb: ohci-st: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-10/+4
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230726113816.888-30-frank.li@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27usb: ehci-exynos: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-2/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20230726113816.888-29-frank.li@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27usb: ehci-st: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-9/+3
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230726113816.888-28-frank.li@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27usb: uhci-platform: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-2/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230726113816.888-27-frank.li@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27usb: ehci-mv: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-2/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230726113816.888-26-frank.li@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27usb: ohci-spear: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-2/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230726113816.888-25-frank.li@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 22:17:00 +0000