summaryrefslogtreecommitdiff
path: root/drivers/usb/chipidea
AgeCommit message (Collapse)AuthorFilesLines
2022-11-21Merge 6.1-rc6 into usb-nextGreg Kroah-Hartman1-0/+2
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09usb: chipidea: core: wrap ci_handle_power_lost() with CONFIG_PM_SLEEPXu Yang1-19/+19
If CONFIG_PM_SLEEP is not set, the following error will be shown up when build kernel: error: 'ci_handle_power_lost' defined but not used. This will move ci_handle_power_lost() to an area wrapped by CONFIG_PM_SLEEP. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Fixes: 74494b33211d ("usb: chipidea: core: add controller resume support when controller is powered off") Reported-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221026121157.1491302-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09usb: chipidea: ci_hdrc_imx: Fix a typo ("regualator")Jonathan Neuschäfer1-1/+1
Change "regualator" to "regulator" in this comment. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Link: https://lore.kernel.org/r/20221104095838.2132945-1-j.neuschaefer@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09usb: chipidea: fix deadlock in ci_otg_del_timerDuoming Zhou1-0/+2
There is a deadlock in ci_otg_del_timer(), the process is shown below: (thread 1) | (thread 2) ci_otg_del_timer() | ci_otg_hrtimer_func() ... | spin_lock_irqsave() //(1) | ... ... | hrtimer_cancel() | spin_lock_irqsave() //(2) (block forever) We hold ci->lock in position (1) and use hrtimer_cancel() to wait ci_otg_hrtimer_func() to stop, but ci_otg_hrtimer_func() also need ci->lock in position (2). As a result, the hrtimer_cancel() in ci_otg_del_timer() will be blocked forever. This patch extracts hrtimer_cancel() from the protection of spin_lock_irqsave() in order that the ci_otg_hrtimer_func() could obtain the ci->lock. What`s more, there will be no race happen. Because the "next_timer" is always under the protection of spin_lock_irqsave() and we only check whether "next_timer" equals to NUM_OTG_FSM_TIMERS in the following code. Fixes: 3a316ec4c91c ("usb: chipidea: use hrtimer for otg fsm timers") Cc: stable <stable@kernel.org> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220918033312.94348-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: usbmisc: add power lost check for imx7ulpLi Jun1-0/+1
imx7ulp can shutdown domain power supply if none of peripheral in this domain is registered as wakeup source, this patch add related power lost check API. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-9-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: usbmisc: add power lost check for imx7dLi Jun1-0/+20
imx7d can shutdown domain power supply if none of peripheral in this domain is registered as wakeup source, this patch add related codes to check if power is lost. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-8-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: usbmisc: add power lost check for imx6sxLi Jun1-0/+20
imx6sx mega off can shutdown domain power supply if none of peripheral in this domain is registered as wakeup source, this patch add related codes to check if power is lost. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-7-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: usbmisc: group usbmisc operations for PMLi Jun3-66/+106
As there maybe more APIs of usbmisc for suspend and resume, group them into imx_usbmisc_suspend/resume. Besides, introduced .power_lost_check API, so that proper resume operations can be performed in power lost case. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-6-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: udc: add suspend/resume support for device controllerXu Yang1-0/+32
The controller's power may be powered off during system suspend. This will add suspend/resume support when the controller suffers power lost. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20221013151442.3262951-5-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: host: add suspend/resume support for host controllerXu Yang1-0/+16
The controller's power may be powered off during system suspend. This will add suspend/resume support when the controller suffers power lost. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-4-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: core: handle suspend/resume for each roleXu Yang2-0/+12
There may be a need to handle suspend/resume per role. This patch will add this support. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20221013151442.3262951-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: core: add controller resume support when controller is ↵Xu Yang3-20/+63
powered off For some SoCs, the controler's power will be off during the system suspend, and it needs some recovery operation to let the system back to workable. We add this support in this patch. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20221013151442.3262951-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: core: handle usb role switch in a common wayXu Yang1-35/+20
Currently, ci_usb_role_switch_set() may be called before system resume stage when suspended. Worse yet, ci_hdrc device may stay at RPM_ACTIVE state which will cause pm_runtime_get_sync() fail to resume the device. In this case, role-switch may unable to complete transition process due to not exit from lpm state or due to lack some means after system resume. Same as ci_cable_notifier(), usb_role_switch could handle its events based on ci_hdrc_cable mechanism. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20221009155336.766960-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-08usb: chipidea: make configs for glue drivers visible with EXPERTLukas Bulwahn1-5/+5
Commit 6a108a14fa35 ("kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT") introduces CONFIG_EXPERT to carry the previous intent of CONFIG_EMBEDDED and just gives that intent a much better name. That has been clearly a good and long overdue renaming, and it is clearly an improvement to the kernel build configuration that has shown to help managing the kernel build configuration in the last decade. However, rather than bravely and radically just deleting CONFIG_EMBEDDED, this commit gives CONFIG_EMBEDDED a new intended semantics, but keeps it open for future contributors to implement that intended semantics: A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Since then, this CONFIG_EMBEDDED implicitly had two purposes: - It can make even more options visible beyond what CONFIG_EXPERT makes visible. In other words, it may introduce another level of enabling the visibility of configuration options: always visible, visible with CONFIG_EXPERT and visible with CONFIG_EMBEDDED. - Set certain default values of some configurations differently, following the assumption that configuring a kernel build for an embedded system generally starts with a different set of default values compared to kernel builds for all other kind of systems. Considering the first purpose, at the point in time where CONFIG_EMBEDDED was renamed to CONFIG_EXPERT, CONFIG_EXPERT already made 130 more options become visible throughout all different menus for the kernel configuration. Over the last decade, this has gradually increased, so that currently, with CONFIG_EXPERT, roughly 170 more options become visible throughout all different menus for the kernel configuration. In comparison, currently with CONFIG_EMBEDDED enabled, just seven more options are visible, one in x86, one in arm, and five for the ChipIdea Highspeed Dual Role Controller. As the numbers suggest, these two levels of enabling the visibility of even more configuration options---beyond what CONFIG_EXPERT enables---never evolved to a good solution in the last decade. In other words, this additional level of visibility of configuration option with CONFIG_EMBEDDED compared to CONFIG_EXPERT has since its introduction never become really valuable. It requires quite some investigation to actually understand what is additionally visible and it does not differ significantly in complexity compared to just enabling CONFIG_EXPERT. This CONFIG_EMBEDDED---or any other config to show more detailed options beyond CONFIG_EXPERT---is unlikely to be valuable unless somebody puts significant effort in identifying how such visibility options can be properly split and creating clear criteria, when some config option is visible with CONFIG_EXPERT and when some config option is visible only with some further option enabled beyond CONFIG_EXPERT, such as CONFIG_EMBEDDED attempted to do. For now, it is much more reasonable to simply make those additional seven options that visible with CONFIG_EMBEDDED, visible with CONFIG_EXPERT, and then remove CONFIG_EMBEDDED. If anyone spends significant effort in structuring the visibility of config options, they may re-introduce suitable new config options simply as they see fit. Make the configs for usb chipidea glue drivers visible when CONFIG_EXPERT is enabled. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20220908104337.11940-5-lukas.bulwahn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-31usb: chipidea: Add support for VBUS control with PHYPiyush Mehta3-0/+15
Some platforms make use of VBUS control over PHY which means controller driver has to access PHY registers to turn on/off VBUS line.This patch adds support for such platforms in chipidea. Flag 'CI_HDRC_PHY_VBUS_CONTROL' added to support VBus control feature. Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com> Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20220822054051.2941282-1-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-05Merge tag 'trace-v6.0' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - Runtime verification infrastructure This is the biggest change here. It introduces the runtime verification that is necessary for running Linux on safety critical systems. It allows for deterministic automata models to be inserted into the kernel that will attach to tracepoints, where the information on these tracepoints will move the model from state to state. If a state is encountered that does not belong to the model, it will then activate a given reactor, that could just inform the user or even panic the kernel (for which safety critical systems will detect and can recover from). - Two monitor models are also added: Wakeup In Preemptive (WIP - not to be confused with "work in progress"), and Wakeup While Not Running (WWNR). - Added __vstring() helper to the TRACE_EVENT() macro to replace several vsnprintf() usages that were all doing it wrong. - eprobes now can have their event autogenerated when the event name is left off. - The rest is various cleanups and fixes. * tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits) rv: Unlock on error path in rv_unregister_reactor() tracing: Use alignof__(struct {type b;}) instead of offsetof() tracing/eprobe: Show syntax error logs in error_log file scripts/tracing: Fix typo 'the the' in comment tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT tracing: Use free_trace_buffer() in allocate_trace_buffers() tracing: Use a struct alignof to determine trace event field alignment rv/reactor: Add the panic reactor rv/reactor: Add the printk reactor rv/monitor: Add the wwnr monitor rv/monitor: Add the wip monitor rv/monitor: Add the wip monitor skeleton created by dot2k Documentation/rv: Add deterministic automata instrumentation documentation Documentation/rv: Add deterministic automata monitor synthesis documentation tools/rv: Add dot2k Documentation/rv: Add deterministic automaton documentation tools/rv: Add dot2c Documentation/rv: Add a basic documentation rv/include: Add instrumentation helper functions rv/include: Add deterministic automata monitor definition via C macros ...
2022-07-27usb/chipidea: fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'power'. Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20220716131630.33151-1-yuanjilin@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-15usb: chipidea: tracing: Use the new __vstring() helperSteven Rostedt (Google)1-2/+2
Instead of open coding a __dynamic_array() with a fixed length (which defeats the purpose of the dynamic array in the first place). Use the new __vstring() helper that will use a va_list and only write enough of the string into the ring buffer that is needed. Link: https://lkml.kernel.org/r/20220705224749.991587733@goodmis.org Cc: Peter Chen <peter.chen@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-06-27Merge 5.19-rc4 into usb-nextGreg Kroah-Hartman1-0/+3
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-24usb: chipidea: udc: check request status before setting device addressXu Yang1-0/+3
The complete() function may be called even though request is not completed. In this case, it's necessary to check request status so as not to set device address wrongly. Fixes: 10775eb17bee ("usb: chipidea: udc: update gadget states according to ch9") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20220623030242.41796-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-21usb: chipidea: ci_hdrc_imx: use dev_err_probe()Alexander Stein1-16/+7
Use dev_err_probe() to simplify handling errors in ci_hdrc_imx_probe() Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20220614120522.1469957-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-21usb: chipidea: udc: implement get_frameMichael Grzeschik3-0/+17
The chipidea udc core is capable of reading the current frame index from hardware. This patch adds the get_frame callback to the driver. Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220616194459.2981519-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10USB: chipidea: fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220521111145.81697-85-Julia.Lawall@inria.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: udc: Fix typo in commenttangmeng1-1/+1
Replace disbale with disable Signed-off-by: tangmeng <tangmeng@uniontech.com> Link: https://lore.kernel.org/r/20220127071619.31812-1-tangmeng@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-12Merge tag 'usb-5.17-rc1' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 5.17-rc1. Nothing major in here, just lots of little updates and cleanups. These include: - some USB header fixes picked from Ingo's header-splitup work - more USB4/Thunderbolt hardware support added - USB gadget driver updates and additions - USB typec additions (includes some acpi changes, which were acked by the ACPI maintainer) - core USB fixes as found by syzbot that were too late for 5.16-final - USB dwc3 driver updates - USB dwc2 driver updates - platform_get_irq() conversions of some USB drivers - other minor USB driver updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits) docs: ABI: fixed formatting in configfs-usb-gadget-uac2 usb: gadget: u_audio: Subdevice 0 for capture ctls usb: gadget: u_audio: fix calculations for small bInterval usb: dwc2: gadget: initialize max_speed from params usb: dwc2: do not gate off the hardware if it does not support clock gating usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h> USB: common: debug: add needed kernel.h include headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h headers/prep: usb: gadget: Fix namespace collision USB: core: Fix bug in resuming hub's handling of wakeup requests USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core usb: gadget: clear related members when goto fail usb: gadget: don't release an existing dev->buf usb: dwc2: Simplify a bitmap declaration usb: Remove usb_for_each_port() usb: typec: port-mapper: Convert to the component framework usb: Link the ports to the connectors they are attached to ...
2022-01-10Merge tag 'drivers-5.17' of ↵Linus Torvalds1-7/+46
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are cleanups and minor bugfixes across several SoC specific drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone, Renesas, ZynqMP Noteworthy new features are: - The op-tee firmware driver gains support for asynchronous notifications from secure-world firmware. - Qualcomm platforms gain support for new SoC types in various drivers: power domain, cache controller, RPM sleep, soc-info - Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as well as a new USIv2 driver that handles various types of serial communiction (uart, i2c, spi) - Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers, as well as memory controller support for RZ/G2L (R9A07G044). - Apple M1 gains support for the PMGR power management driver" * tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) soc: qcom: rpmh-rsc: Fix typo in a comment soc: qcom: socinfo: Add SM6350 and SM7225 dt-bindings: arm: msm: Don't mark LLCC interrupt as required dt-bindings: firmware: scm: Add SM6350 compatible dt-bindings: arm: msm: Add LLCC for SM6350 soc: qcom: rpmhpd: Sort power-domain definitions and lists soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280 soc: qcom: rpmhpd: Rename rpmhpd struct names soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao soc: qcom: socinfo: add SM8450 ID soc: qcom: rpmhpd: Add SM8450 power domains dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding soc: qcom: smem: Update max processor count dt-bindings: arm: qcom: Document SM8450 SoC and boards dt-bindings: firmware: scm: Add SM8450 compatible dt-bindings: arm: cpus: Add kryo780 compatible soc: qcom: rpmpd: Add support for sm6125 dt-bindings: qcom-rpmpd: Add sm6125 power domains soc: qcom: aoss: constify static struct thermal_cooling_device_ops PM: AVS: qcom-cpr: Use div64_ul instead of do_div ...
2021-12-17usb: chipidea: Set the DT node on the child deviceRob Herring1-0/+1
The ChipIdea glue drivers just copy the glue resources to the "ci_hdrc" child device. Instead, set the child device's DT node pointer to the parent device's node so that platform_get_irq() can find the IRQ resources in the DT. This removes the need for statically populating the IRQ resources from the DT which has been deprecated for some time. Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211215225646.1997946-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-16usb: chipidea: tegra: Add runtime PM and OPP supportDmitry Osipenko1-7/+46
The Tegra USB controller belongs to the core power domain and we're going to enable GENPD support for the core domain. Now USB controller must be resumed using runtime PM API in order to initialize the USB power state. We already support runtime PM for the CI device, but CI's PM is separated from the RPM managed by tegra-usb driver. Add runtime PM and OPP support to the driver. Acked-by: Peter Chen <peter.chen@kernel.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-11-29Merge 5.16-rc3 into usb-nextGreg Kroah-Hartman1-9/+9
We need the USB driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17usb: chipidea: ci_hdrc_imx: fix potential error pointer dereference in probeDan Carpenter1-9/+9
If the first call to devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0) fails with something other than -ENODEV then it leads to an error pointer dereference. For those errors we should just jump directly to the error handling. Fixes: 8253a34bfae3 ("usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle") Cc: stable <stable@vger.kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211117074923.GF5237@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17usb: Remove redundant 'flush_workqueue()' callsChristophe JAILLET1-3/+2
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Acked-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Peter Chen <peter.chen@kernel.or> # for chipidea part Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/563123a8117d6cafae3f134e497587bd2b8bb7f4.1636734453.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-22USB: chipidea: fix interrupt deadlockJohan Hovold1-7/+16
Chipidea core was calling the interrupt handler from non-IRQ context with interrupts enabled, something which can lead to a deadlock if there's an actual interrupt trying to take a lock that's already held (e.g. the controller lock in udc_irq()). Add a wrapper that can be used to fake interrupts instead of calling the handler directly. Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Fixes: 876d4e1e8298 ("usb: chipidea: core: add wakeup support for extcon") Cc: Peter Chen <peter.chen@kernel.org> Cc: stable@vger.kernel.org # 4.4 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211021083447.20078-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-11Merge 5.15-rc5 into usb-nextGreg Kroah-Hartman1-5/+10
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-10usb: chipidea: udc: make controller hardware endpoint primedPiyush Mehta1-0/+8
Root-cause: There is an issue like endpoint is not recognized as primed, when bus have more pressure and the add dTD tripwire semaphore (ATDTW bit in USBCMD register) that can cause the controller to ignore a dTD that is added to a primed endpoint. This issue observed with the Windows10 host machine. Workaround: The software must implement a periodic cycle, and check for each dTD, if the endpoint is primed. It can do this by reading the corresponding bits in the ENDPTPRIME and ENDPTSTAT registers. If these bits are read at 0, the software needs to re-prime the endpoint by writing 1 to the corresponding bit in the ENDPTPRIME register. Added conditional revision check of 2.20[CI_REVISION_22]. Link: https://lore.kernel.org/linux-usb/SJ0PR02MB8644CBBA848A0F68323F1AA5D4D99@SJ0PR02MB8644.namprd02.prod.outlook.com/ Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com> Link: https://lore.kernel.org/r/20210913140005.955699-1-piyush.mehta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandleFabio Estevam1-5/+10
When passing 'phys' in the devicetree to describe the USB PHY phandle (which is the recommended way according to Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the following NULL pointer dereference is observed on i.MX7 and i.MX8MM: [ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 1.498170] Mem abort info: [ 1.500966] ESR = 0x96000044 [ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.509356] SET = 0, FnV = 0 [ 1.512416] EA = 0, S1PTW = 0 [ 1.515569] FSC = 0x04: level 0 translation fault [ 1.520458] Data abort info: [ 1.523349] ISV = 0, ISS = 0x00000044 [ 1.527196] CM = 0, WnR = 1 [ 1.530176] [0000000000000098] user address but active_mm is swapper [ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 1.542125] Modules linked in: [ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3 [ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT) [ 1.557133] Workqueue: events_unbound deferred_probe_work_func [ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) [ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510 [ 1.573973] lr : imx7d_charger_detection+0x22c/0x510 This happens because the charger functions check for the phy presence inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc' (ci->usb_phy) instead. This causes the NULL pointer dereference inside imx7d_charger_detection(). Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found. Tested on a imx7s-warp board. Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection") Cc: stable@vger.kernel.org Reported-by: Heiko Thiery <heiko.thiery@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210921113754.767631-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-21usb: chipidea: host: fix port index underflow and UBSAN complainsLi Jun1-3/+11
If wIndex is 0 (and it often is), these calculations underflow and UBSAN complains, here resolve this by not decrementing the index when it is equal to 0, this copies the solution from commit 85e3990bea49 ("USB: EHCI: avoid undefined pointer arithmetic and placate UBSAN") Reported-by: Zhipeng Wang <zhipeng.wang_1@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1624004938-2399-1-git-send-email-jun.li@nxp.com Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-06-21Merge tag 'v5.13-rc7' into usb-nextGreg Kroah-Hartman1-2/+14
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16usb: chipidea: imx: Fix Battery Charger 1.2 CDP detectionBreno Lima1-2/+14
i.MX8MM cannot detect certain CDP USB HUBs. usbmisc_imx.c driver is not following CDP timing requirements defined by USB BC 1.2 specification and section 3.2.4 Detection Timing CDP. During Primary Detection the i.MX device should turn on VDP_SRC and IDM_SINK for a minimum of 40ms (TVDPSRC_ON). After a time of TVDPSRC_ON, the i.MX is allowed to check the status of the D- line. Current implementation is waiting between 1ms and 2ms, and certain BC 1.2 complaint USB HUBs cannot be detected. Increase delay to 40ms allowing enough time for primary detection. During secondary detection the i.MX is required to disable VDP_SRC and IDM_SNK, and enable VDM_SRC and IDP_SINK for at least 40ms (TVDMSRC_ON). Current implementation is not disabling VDP_SRC and IDM_SNK, introduce disable sequence in imx7d_charger_secondary_detection() function. VDM_SRC and IDP_SINK should be enabled for at least 40ms (TVDMSRC_ON). Increase delay allowing enough time for detection. Cc: <stable@vger.kernel.org> Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection") Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Jun Li <jun.li@nxp.com> Link: https://lore.kernel.org/r/20210614175013.495808-1-breno.lima@nxp.com Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-05-31Merge 5.13-rc4 into usb-nextGreg Kroah-Hartman1-0/+1
We need the usb/thunderbolt fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: chipidea: udc: Fix incorrectly documented function ↵Lee Jones1-1/+1
'hw_port_is_high_speed()' Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/udc.c:247: warning: expecting prototype for hw_is_port_high_speed(). Prototype was for hw_port_is_high_speed() instead Cc: Peter Chen <peter.chen@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-17-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: chipidea: otg: Fix formatting and missing documentation issuesLee Jones1-4/+5
Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/otg.c:25: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/chipidea/otg.c:78: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/chipidea/otg.c:143: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Peter Chen <peter.chen@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-15-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: chipidea: core: Fix incorrectly documented function 'ci_usb_phy_exit()'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/core.c:343: warning: expecting prototype for _ci_usb_phy_exit(). Prototype was for ci_usb_phy_exit() instead Cc: Peter Chen <peter.chen@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: linux-usb@vger.kernel.org Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-14-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27USB: chipidea: remove dentry storage for debugfs fileGreg Kroah-Hartman2-22/+14
There is no need to store the dentry pointer for a debugfs file that we only use to remove it when the device goes away. debugfs can do the lookup for us instead, saving us some trouble, and making things smaller overall. Cc: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20210525171419.758146-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-17usb: chipidea: udc: assign interrupt number to USB gadget structureLi Jun1-0/+1
Chipidea also need sync interrupt before unbind the udc while gadget remove driver, otherwise setup irq handling may happen while unbind, see below dump generated from android function switch stress test: [ 4703.503056] android_work: sent uevent USB_STATE=CONNECTED [ 4703.514642] android_work: sent uevent USB_STATE=DISCONNECTED [ 4703.651339] android_work: sent uevent USB_STATE=CONNECTED [ 4703.661806] init: Control message: Processed ctl.stop for 'adbd' from pid: 561 (system_server) [ 4703.673469] init: processing action (init.svc.adbd=stopped) from (/system/etc/init/hw/init.usb.configfs.rc:14) [ 4703.676451] Unable to handle kernel read from unreadable memory at virtual address 0000000000000090 [ 4703.676454] Mem abort info: [ 4703.676458] ESR = 0x96000004 [ 4703.676461] EC = 0x25: DABT (current EL), IL = 32 bits [ 4703.676464] SET = 0, FnV = 0 [ 4703.676466] EA = 0, S1PTW = 0 [ 4703.676468] Data abort info: [ 4703.676471] ISV = 0, ISS = 0x00000004 [ 4703.676473] CM = 0, WnR = 0 [ 4703.676478] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004a867000 [ 4703.676481] [0000000000000090] pgd=0000000000000000, p4d=0000000000000000 [ 4703.676503] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 4703.758297] Modules linked in: synaptics_dsx_i2c moal(O) mlan(O) [ 4703.764327] CPU: 0 PID: 235 Comm: lmkd Tainted: G W O 5.10.9-00001-g3f5fd8487c38-dirty #63 [ 4703.773720] Hardware name: NXP i.MX8MNano EVK board (DT) [ 4703.779033] pstate: 60400085 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 4703.785046] pc : _raw_write_unlock_bh+0xc0/0x2c8 [ 4703.789667] lr : android_setup+0x4c/0x168 [ 4703.793676] sp : ffff80001256bd80 [ 4703.796989] x29: ffff80001256bd80 x28: 00000000000000a8 [ 4703.802304] x27: ffff800012470000 x26: ffff80006d923000 [ 4703.807616] x25: ffff800012471000 x24: ffff00000b091140 [ 4703.812929] x23: ffff0000077dbd38 x22: ffff0000077da490 [ 4703.818242] x21: ffff80001256be30 x20: 0000000000000000 [ 4703.823554] x19: 0000000000000080 x18: ffff800012561048 [ 4703.828867] x17: 0000000000000000 x16: 0000000000000039 [ 4703.834180] x15: ffff8000106ad258 x14: ffff80001194c277 [ 4703.839493] x13: 0000000000003934 x12: 0000000000000000 [ 4703.844805] x11: 0000000000000000 x10: 0000000000000001 [ 4703.850117] x9 : 0000000000000000 x8 : 0000000000000090 [ 4703.855429] x7 : 6f72646e61203a70 x6 : ffff8000124f2450 [ 4703.860742] x5 : ffffffffffffffff x4 : 0000000000000009 [ 4703.866054] x3 : ffff8000108a290c x2 : ffff00007fb3a9c8 [ 4703.871367] x1 : 0000000000000000 x0 : 0000000000000090 [ 4703.876681] Call trace: [ 4703.879129] _raw_write_unlock_bh+0xc0/0x2c8 [ 4703.883397] android_setup+0x4c/0x168 [ 4703.887059] udc_irq+0x824/0xa9c [ 4703.890287] ci_irq+0x124/0x148 [ 4703.893429] __handle_irq_event_percpu+0x84/0x268 [ 4703.898131] handle_irq_event+0x64/0x14c [ 4703.902054] handle_fasteoi_irq+0x110/0x210 [ 4703.906236] __handle_domain_irq+0x8c/0xd4 [ 4703.910332] gic_handle_irq+0x6c/0x124 [ 4703.914081] el1_irq+0xdc/0x1c0 [ 4703.917221] _raw_spin_unlock_irq+0x20/0x54 [ 4703.921405] finish_task_switch+0x84/0x224 [ 4703.925502] __schedule+0x4a4/0x734 [ 4703.928990] schedule+0xa0/0xe8 [ 4703.932132] do_notify_resume+0x150/0x184 [ 4703.936140] work_pending+0xc/0x40c [ 4703.939633] Code: d5384613 521b0a69 d5184609 f9800111 (885ffd01) [ 4703.945732] ---[ end trace ba5c1875ae49d53c ]--- [ 4703.950350] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 4703.957223] SMP: stopping secondary CPUs [ 4703.961151] Kernel Offset: disabled [ 4703.964638] CPU features: 0x0240002,2000200c [ 4703.968905] Memory Limit: none [ 4703.971963] Rebooting in 5 seconds.. Tested-by: faqiang.zhu <faqiang.zhu@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1620989984-7653-1-git-send-email-jun.li@nxp.com Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-03-23usb: chipidea: tegra: Silence deferred probe errorDmitry Osipenko1-5/+3
Silence deferred probe error caused by the PHY driver which is probed later than the ChipIdea driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210314203927.2572-1-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: chipidea: tegra: fix flexible_array.cocci warningskernel test robot1-1/+1
Zero-length and one-element arrays are deprecated, see Documentation/process/deprecated.rst Flexible-array members should be used instead. Generated by: scripts/coccinelle/misc/flexible_array.cocci Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode") CC: Peter Geis <pgwipeout@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2102132108040.2720@hadrien Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-13usb: chipidea: tegra: Specify TX FIFO threshold in UDC SoC infoDmitry Osipenko1-5/+14
The UDC/OTG controller could be switched to a host mode and the TXFILLTUNING register needs to be programmed properly for the host mode. Hence specify the TX FIFO threshold in the UDC SoC info. Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201218120246.7759-8-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-13usb: chipidea: tegra: Support runtime PMDmitry Osipenko1-3/+10
Tegra PHY driver now supports waking up controller from a low power mode. Enable runtime PM in order to put controller into the LPM during idle. Tested-by: Matt Merhar <mattmerhar@protonmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Ion Agorria <ion@agorria.com> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201218120246.7759-7-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-13usb: chipidea: tegra: Support host modePeter Geis4-8/+350
Add USB host mode to the Tegra HDRC driver. This allows us to benefit from support provided by the generic ChipIdea driver instead of duplicating the effort in a separate ehci-tegra driver. Tested-by: Matt Merhar <mattmerhar@protonmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Ion Agorria <ion@agorria.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201218120246.7759-6-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-13usb: chipidea: tegra: Rename UDC to USBDmitry Osipenko2-40/+40
Rename all occurrences in the code from "udc" to "usb" and change the Kconfig entry in order to show that this driver supports USB modes other than device-only mode. The follow up patch will add host-mode support and it will be cleaner to perform the renaming separately, i.e. in this patch. Tested-by: Matt Merhar <mattmerhar@protonmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Ion Agorria <ion@agorria.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201218120246.7759-5-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 06:07:12 +0000