summaryrefslogtreecommitdiff
path: root/drivers/remoteproc
AgeCommit message (Collapse)AuthorFilesLines
2019-02-20remoteproc: fix rproc_check_carveout_da() returned error and commentsLoic Pallardy1-10/+12
Fix typo in comments. Change returned error from ENOMEM to EINVAL as not dealing with memory allocation. Remove carveout forced da update and return an error when no configuration match Fixes: c874bf59add0 ("remoteproc: add helper function to check carveout device address") Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20remoteproc: fix trace buffer va initializationLoic Pallardy3-25/+40
With rproc_alloc_registered_carveouts() introduction, carveouts are allocated after resource table parsing. rproc_da_to_va() may return NULL at trace resource registering. This patch modifies trace debufs registering to provide device address (da) instead of va. da to va translation is done at each trace buffer access through debugfs interface. Fixes: d7c51706d095 ("remoteproc: add alloc ops in rproc_mem_entry struct") Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20remoteproc: fix rproc_alloc_carveout() for rproc with iommu domainLoic Pallardy1-10/+16
Correct remoteproc core behavior when memory carveout device address is fixed in resource table and rproc device doesn't have associated IOMMU. Current returned error is breaking legacy on TI platforms. This patch restores previous behavior. It adds a warn message when allocation doesn't fit carveout request, but doesn't stop rproc_start() sequence anymore. Fixes: 3bc8140b157c ("remoteproc: configure IOMMU only if device address requested") Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20remoteproc: add warning on resource table castLoic Pallardy1-2/+14
Today resource table supports only 32bit address fields. This is not compliant with 64bit platform for which addresses are cast in 32bit. This patch adds warn messages when address cast is done. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20remoteproc: fix rproc_alloc_carveout() bad variable castLoic Pallardy1-1/+1
As dma member of struct rproc_mem_entry is dma_addr_t, no need to cast in u32. Fixes: d7c51706d095 ("remoteproc: add alloc ops in rproc_mem_entry struct") Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20remoteproc: fix rproc_da_to_va in case of unallocated carveoutLoic Pallardy1-0/+4
With introduction of rproc_alloc_registered_carveouts() which delays carveout allocation just before the start of the remote processor, rproc_da_to_va() could be called before all carveouts are allocated. This patch adds a check in rproc_da_to_va() to return NULL if carveout is not allocated. Fixes: d7c51706d095 ("remoteproc: add alloc ops in rproc_mem_entry struct") Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20remoteproc: correct rproc_mem_entry_init() commentsLoic Pallardy1-1/+2
Add alloc parameter description and correct comment about release one. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20remoteproc: fix recovery procedureLoic Pallardy3-6/+21
Commit 7e83cab824a87e83cab824a8 ("remoteproc: Modify recovery path to use rproc_{start,stop}()") replaces rproc_{shutdown,boot}() with rproc_{stop,start}(), which skips destroy the virtio device at stop but re-initializes it again at start. Issue is that struct virtio_dev is not correctly reinitialized like done at initial allocation thanks to kzalloc() and kobject is considered as already initialized by kernel. That is due to the fact struct virtio_dev is allocated and released at vdev resource handling level managed and virtio device is registered and unregistered at rproc subdevices level. Moreover kernel documentation mentions that device struct must be zero initialized before calling device_initialize(). This patch disentangles struct virtio_dev from struct rproc_vdev as the two struct don't have the same life-cycle. struct virtio_dev is now allocated on rproc_start() and released on rproc_stop(). This patch applies on top of patch remoteproc: create vdev subdevice with specific dma memory pool [1] [1]: https://patchwork.kernel.org/patch/10755781/ Fixes: 7e83cab824a8 ("remoteproc: Modify recovery path to use rproc_{start,stop}()") Reported-by: Xiang Xiao <xiaoxiang781216@gmail.com> Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20remoteproc: st: add reserved memory supportLoic Pallardy1-11/+80
ST remote processor needs some specified memory regions for firmware and IPC. Memory regions are defined as reserved memory and should be registered in remoteproc core thanks to rproc_add_carveout function before rproc_start. For this, st rproc driver implements prepare ops. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20remoteproc: create vdev subdevice with specific dma memory poolLoic Pallardy3-4/+86
This patch creates a dedicated vdev subdevice for each vdev declared in firmware resource table and associates carveout named "vdev%dbuffer" (with %d vdev index in resource table) if any as dma coherent memory pool. Then vdev subdevice is used as parent for virtio device. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-17remoteproc: q6v5_adsp: Remove voting for lpass_aon clockRohit kumar1-1/+1
Lpass_aon clock is on by default. Remove it from lpass clock list to avoid voting for it. Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-30remoteproc: q6v5-mss: Active powerdomain for SDM845Bjorn Andersson1-2/+29
The SDM845 MSS needs the load_state powerdomain voted for during the duration of the MSS being powered on, to let the AOSS know that it may not perform certain power save measures. So vote for this. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-30remoteproc: q6v5-mss: Vote for rpmh power domainsRajendra Nayak1-5/+114
With rpmh ARC resources being modelled as power domains with performance state, we need to proxy vote on these for SDM845. Add support to vote on multiple of them, now that genpd supports associating mutliple power domains to a device. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> [bjorn: Drop device link, improve error handling, name things "proxy"] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-29remoteproc: qcom: Add support for parsing fw dt bindingsSibi Sankar2-11/+45
Add support for parsing "firmware-name" dt bindings which specifies the relative paths of mba/modem/pas image as strings. Fallback to the default paths for mba/modem/pas image on -EINVAL. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-29remoteproc: qcom_q6v5: don't auto boot remote processorRamon Fried1-0/+2
Sometimes that rmtfs userspace module is not brought up fast enough and the modem crashes. disabling automated boot in the driver and triggering the boot from user-space sovles the problem. Acked-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-21remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdownSibi Sankar1-1/+41
After sending a sysmon shutdown request to the SSCTL service on the subsystem, wait for the service to send shutdown-ack interrupt or an indication message to signal the completion of graceful shutdown. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-21remoteproc: qcom: Add shutdown-ack irqSibi Sankar5-2/+53
Add shutdown-ack irq handling required for sysmon shutdown for Q6V5 MSS on SDM845/MSM8996 and for WCSS Q6V5 on QCS404 SoC. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [bjorn: Revert back to qcom_add_sysmon_subdev returning a sysmon object] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-14remoteproc/qcom_sysmon.c: Remove duplicate headerBrajeswar Ghosh1-1/+0
Remove linux/notifier.h which is included more than once Acked-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-14virtio: don't allocate vqs when names[i] = NULLWei Wang1-2/+7
Some vqs may not need to be allocated when their related feature bits are disabled. So callers may pass in such vqs with "names = NULL". Then we skip such vq allocations. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Cc: stable@vger.kernel.org Fixes: 86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
2019-01-06remoteproc: qcom: q6v5-mss: Add missing regulator for MSM8996Sibi Sankar1-0/+7
Add proxy vote for pll supply on MSM8996 SoC. Fixes: 9f058fa2efb1 ("remoteproc: qcom: Add support for mss remoteproc on msm8996") Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-06remoteproc: qcom: q6v5-mss: Add missing clocks for MSM8996Sibi Sankar1-1/+4
Proxy vote for QDSS clock and remove vote on handover interrupt to provide MSS PBL with access to STM hardware registers during boot. Add "snoc_axi" and "mnoc_axi" to the active clock list. Rename "gpll0_mss_clk" to "gpll0_mss" for consistency across SoCs. Fixes: 9f058fa2efb1 ("remoteproc: qcom: Add support for mss remoteproc on msm8996") Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-06remoteproc: qcom: fix spelling mistake "Peripherial" -> "Peripheral"Colin Ian King1-1/+1
There is a spelling mistake in the module description text, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-06remoteproc: debug: add crash debugfs nodeXiang Xiao1-0/+26
so we can trigger the crash manully which could: 1.test the crash handling code path more easily 2.update the firmware without reboot kernel Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-11-26virtio_ring: disable packed ring on unsupported transportsTiwei Bie1-0/+13
Currently, ccw, vop and remoteproc need some legacy virtio APIs to create or access virtio rings, which are not supported by packed ring. So disable packed ring on these transports for now. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-19remoteproc: qcom: q6v5-mss: Register segments/dumpfn for coredumpSibi Sankar1-0/+42
Register the MDT segments, custom dumpfn and private data with the remoteproc core dump functionality. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-19remoteproc: qcom: q6v5-mss: Add custom dump function for modemSibi Sankar1-0/+33
The per segment dump function is responsible for loading the mba before device memory segments associated with coredump can be populated and for cleaning up the resources post coredump. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-19remoteproc: qcom: q6v5-mss: Refactor mba load/unload sequenceSibi Sankar1-138/+170
Refactor re-useable parts of mba load/unload sequence into mba_load and mba_reclaim respectively. This is done in order to prevent code duplication for modem coredump, which requires the mba to be loaded before dumping the segments. The following changes in functionality are intended: * Add software bypass to avoid high MX current in mpss error path. * Remove the proxy votes of clk/regs only after the active/reset clks/regs. * Reclaim MBA memory after mpss_load failure in mba_reclaim func. * Set/Unset the dump_mba_loaded flag on mba_load/mba_reclaim respectively. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-19remoteproc: Add mechanism for custom dump function assignmentSibi Sankar1-0/+38
This patch adds a mechanism for assigning each rproc dump segment with a custom dump function and private data. The dump function is to be called for each rproc segment during coredump if assigned. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [bjorn: reordred arguments to rproc_coredump_add_custom_segment()] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-19remoteproc: Introduce custom dump function for each remoteproc segmentSibi Sankar1-7/+11
Introduce custom dump function and private data per remoteproc dump segment. The dump function is responsible for filling the device memory segment associated with coredump Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-14remoteproc: modify vring allocation to rely on centralized carveout allocatorLoic Pallardy3-30/+47
Current version of rproc_alloc_vring function supports only dynamic vring allocation. This patch allows to allocate vrings based on memory region declatation. Vrings are now manage like memory carveouts, to communize memory management code in rproc_alloc_registered_carveouts(). Allocated buffer is retrieved in rp_find_vq() thanks to rproc_find_carveout_by_name() functions for. This patch sets vrings names to vdev"x"vring"y" with x vdev index in resource table and y vring index in vdev. This will be updated when name will be associated to vdev in firmware resource table. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-09remoteproc: qcom: q6v5: shore up resource probe handlingBrian Norris1-8/+36
Commit d5269c4553a6 ("remoteproc: qcom: q6v5: Propagate EPROBE_DEFER") fixed up our probe code to handle -EPROBE_DEFER, but it ignored one of our interrupts, and it also didn't really handle all the other error codes you might get (e.g., with a bad DT definition). Handle those all explicitly. Fixes: d5269c4553a6 ("remoteproc: qcom: q6v5: Propagate EPROBE_DEFER") Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-09remoteproc: qcom: qcom_q6v5_adsp: Fix some return value checkWei Yongjun1-8/+4
In case of error, the functions devm_kcalloc() and devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Also removed -EPROBE_DEFER check since devm_kcalloc never return this error. Fixes: dc160e449122 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-09remoteproc: modify rproc_handle_carveout to support pre-registered regionLoic Pallardy1-0/+30
In current version rproc_handle_carveout() function registers carveout for allocation. This patch extends rproc_handle_carveout() function to support pre-registered region. Match is done on region name, then requested device address and length are checked. If match found, pre-registered region is associated with resource table request. If no name match found, new carveout is registered for allocation. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-09remoteproc: add helper function to check carveout device addressLoic Pallardy1-0/+47
This patch introduces a function to verify that a specified carveout is fitting request device address and associated length Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-09remoteproc: add helper function to allocate rproc_mem_entry from reserved memoryLoic Pallardy1-0/+37
This patch introduces rproc_res_mem_entry_init() helper function to allocate a rproc_mem_entry structure from a reserved memory region. In that case, rproc_mem_entry structure has no alloc and release ops. It will be used to assigned the specified reserved memory to any rproc sub device. Relation between rproc_mem_entry and rproc sub device will be done by name. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-09remoteproc: add alloc ops in rproc_mem_entry structLoic Pallardy1-93/+168
Memory entry could be allocated in different ways (ioremap, dma_alloc_coherent, internal RAM allocator...). This patch introduces an alloc ops in rproc_mem_entry structure to associate dedicated allocation mechanism to each memory entry descriptor in order to do remote core agnostic from memory allocators. The introduction of this ops allows to perform allocation of all registered carveout at the same time, just before calling rproc_start(). It simplifies and makes uniform carveout management whatever origin. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-09remoteproc: introduce rproc_find_carveout_by_name functionLoic Pallardy1-0/+42
This patch provides a new function to find a carveout according to a name. If match found, this function returns a pointer on the corresponding carveout (rproc_mem_entry structure). Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-09remoteproc: introduce rproc_add_carveout functionLoic Pallardy1-1/+15
This patch introduces a new API to allow platform driver to register platform specific carveout regions. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-09remoteproc: add helper function to allocate and init rproc_mem_entry structLoic Pallardy1-16/+49
This patch introduces rproc_mem_entry_init helper function to simplify rproc_mem_entry structure allocation and filling by client. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-09remoteproc: add name in rproc_mem_entry structLoic Pallardy2-0/+2
Add name field in struct rproc_mem_entry. This new field will be used to match memory area requested in resource table with pre-registered carveout. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-09remoteproc: add release ops in rproc_mem_entry structLoic Pallardy1-2/+21
Memory entry could be allocated in different ways (ioremap, dma_alloc_coherent, internal RAM allocator...). This patch introduces a release ops in rproc_mem_entry structure to associate dedicated release mechanism to each memory entry descriptor in order to keep remoteproc core generic. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-09remoteproc: add rproc_va_to_pa functionLoic Pallardy1-1/+17
This new function translates CPU virtual address in CPU physical one according to virtual address location. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-09remoteproc: configure IOMMU only if device address requestedLoic Pallardy1-1/+9
If there is no IOMMU associate to remote processor device, remoteproc_core won't be able to satisfy device address requested in firmware resource table. Return an error as configuration won't be coherent. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-08remoteproc: qcom: q6v5-mss: add SCM probe dependencyBrian Norris1-0/+3
The memory ownership transfer request is performed using SCM, ensure that SCM is available before we probe the driver if memory protection is needed by the subsystem. Fixes: 6c5a9dc2481b ("remoteproc: qcom: Make secure world call for mem ownership switch") Cc: stable@vger.kernel.org Signed-off-by: Brian Norris <briannorris@chromium.org> [bjorn: Added condition for need_mem_protection, updated commit message] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-07remoteproc: qcom: q6v5-pil: Assign the relocated addressSibi Sankar1-0/+1
Assign the relocated base of the modem image, as the offsets from the virtual memory might not be based on the physical address. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-05remoteproc: qcom: Introduce Non-PAS ADSP PIL driverRohit kumar3-0/+517
This adds Non PAS ADSP PIL driver for Qualcomm Technologies Inc SoCs. Added initial support for SDM845 with ADSP bootup and shutdown operation handled from Application Processor SubSystem(APSS). Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Tested-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> [bjorn: Renamed driver and Kconfig from qcom_adsp_pil to qcom_q6v5_adsp] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-05remoteproc: qcom: q6v5: Fix a race condition on fatal crashSibi Sankar1-2/+1
Currently with GLINK_SSR enabled each fatal crash results in servicing a crash from wdog as well. This is due to a race that occurs in setting the running flag in the shutdown path. Fix this by moving the running flag to the end of fatal interrupt handler. Crash Logs: qcom-q6v5-pil 4080000.remoteproc: fatal error without message remoteproc remoteproc0: crash detected in 4080000.remoteproc: type fatal error remoteproc remoteproc0: handling crash #1 in 4080000.remoteproc remoteproc remoteproc0: recovering 4080000.remoteproc qcom-q6v5-pil 4080000.remoteproc: watchdog without message remoteproc remoteproc0: crash detected in 4080000.remoteproc: type watchdog remoteproc:glink-edge: intent request timed out qcom_glink_ssr remoteproc:glink-edge.glink_ssr.-1.-1: failed to send cleanup message qcom_glink_ssr remoteproc:glink-edge.glink_ssr.-1.-1: timeout waiting for cleanup done message qcom-q6v5-pil 4080000.remoteproc: timed out on wait qcom-q6v5-pil 4080000.remoteproc: port failed halt remoteproc remoteproc0: stopped remote processor 4080000.remoteproc qcom-q6v5-pil 4080000.remoteproc: MBA booted, loading mpss remoteproc remoteproc0: remote processor 4080000.remoteproc is now up remoteproc remoteproc0: handling crash #2 in 4080000.remoteproc remoteproc remoteproc0: recovering 4080000.remoteproc qcom-q6v5-pil 4080000.remoteproc: port failed halt remoteproc remoteproc0: stopped remote processor 4080000.remoteproc qcom-q6v5-pil 4080000.remoteproc: MBA booted, loading mpss remoteproc remoteproc0: remote processor 4080000.remoteproc is now up Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-05remoteproc: Check for NULL firmwares in sysfs interfaceSuman Anna1-0/+5
The remoteproc framework provides a sysfs file 'firmware' for modifying the firmware image name from userspace. Add an additional check to ensure NULL firmwares are errored out right away, rather than getting a delayed error while requesting a firmware during the start of a remoteproc later on. Tested-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-05remoteproc: qcom: q6v5-pil: Add PDC reset for modem on SDM845 SoCsSibi Sankar1-5/+24
In the presence of a PDC block working with subsystem RSC, assert/deassert PDC reset in modem start/stop path. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-05remoteproc: qcom: q6v5-pil: Explicitly get mss_restart lineSibi Sankar1-1/+1
Explicitly get mss_restart to facilitate adding PDC reset line for modem on SDM845 SoCs Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 09:04:47 +0000