summaryrefslogtreecommitdiff
path: root/drivers/pci/pci-sysfs.c
AgeCommit message (Collapse)AuthorFilesLines
2020-12-04PCI: Add sysfs attribute for device power stateMaximilian Luz1-0/+10
While PCI power states D0-D3hot can be queried from user-space via lspci, D3cold cannot. lspci cannot provide an accurate value when the device is in D3cold as it has to restore the device to D0 before it can access its power state via the configuration space, leading to it reporting D0 or another on-state. Thus lspci cannot be used to diagnose power consumption issues for devices that can enter D3cold or to ensure that devices properly enter D3cold at all. Add a new sysfs device attribute for the PCI power state, showing the current power state as seen by the kernel. [bhelgaas: drop READ_ONCE(), see discussion at the link] Link: https://lore.kernel.org/r/20201102141520.831630-1-luzmaximilian@gmail.com Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-21Merge branch 'pci/misc'Bjorn Helgaas1-3/+3
- Remove unnecessary #includes (Gustavo Pimentel) - Fix intel_mid_pci.c build error when !CONFIG_ACPI (Randy Dunlap) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Simplify pci-pf-stub by using module_pci_driver() (Liu Shixin) - Print IRQ used by Link Bandwidth Notification (Dongdong Liu) - Update sysfs mmap-related #ifdef comments (Clint Sbisa) - Simplify pci_dev_reset_slot_function() (Lukas Wunner) - Use "NULL" instead of "0" to fix sparse warnings (Gustavo Pimentel) - Simplify bool comparisons (Krzysztof Wilczyński) - Drop double zeroing for P2PDMA sg_init_table() (Julia Lawall) * pci/misc: PCI: v3-semi: Remove unneeded break PCI/P2PDMA: Drop double zeroing for sg_init_table() PCI: Simplify bool comparisons PCI: endpoint: Use "NULL" instead of "0" as a NULL pointer PCI: Simplify pci_dev_reset_slot_function() PCI: Update mmap-related #ifdef comments PCI/LINK: Print IRQ number used by port PCI/IOV: Simplify pci-pf-stub with module_pci_driver() PCI: Use scnprintf(), not snprintf(), in sysfs "show" functions x86/PCI: Fix intel_mid_pci.c build error when ACPI is not enabled PCI: Remove unnecessary header includes
2020-09-17PCI: Update mmap-related #ifdef commentsClint Sbisa1-2/+2
f719582435af ("PCI: Add pci_mmap_resource_range() and use it for ARM64") changed the #ifdef condition around pci_create_resource_files(), pci_remove_resource_files(), and related functions, but did not update comments at the #else and #ifdef. Update the comments to match the #ifdef. [bhelgaas: commit log, drop #endif comment since it's close to the #else] Link: https://lore.kernel.org/r/20200821155121.nzxjeeoze4h5pone@amazon.com Signed-off-by: Clint Sbisa <csbisa@amazon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-09-17PCI: Add schedule point in pci_read_config()Jiang Biao1-0/+1
The PCI sysfs "config" file allows large reads, and the resulting PCI config reads can take several milliseconds to complete. Testing with the cyclictest [1] benchmark showed 5ms+ latencies. Add a schedule point in pci_read_config() to reduce the maximum latency. [1] https://git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git/ [bhelgaas: commit log] Link: https://lore.kernel.org/r/20200824052025.48362-1-benbjiang@tencent.com Reported-by: Bin Lai <robinlai@tencent.com> Signed-off-by: Jiang Biao <benbjiang@tencent.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-09-01PCI: Use scnprintf(), not snprintf(), in sysfs "show" functionsKrzysztof Wilczyński1-1/+1
Sysfs "show" methods should return the number of bytes printed into the buffer. This is the return value of scnprintf() [1]. snprintf(buf, size, ...) prints at most "size" bytes into "buf", but returns the number of bytes that *would* be printed if "buf" were large enough. Replace use of snprintf() with scnprintf(). No functional change intended. Related: https://patchwork.kernel.org/patch/9946759/#20969333 https://lwn.net/Articles/69419 [1] Documentation/filesystems/sysfs.rst [bhelgaas: squashed, commit log] Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200824233918.26306-2-kw@linux.com Link: https://lore.kernel.org/r/20200824233918.26306-3-kw@linux.com Link: https://lore.kernel.org/r/20200824233918.26306-4-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-04-02Merge branch 'pci/misc'Bjorn Helgaas1-2/+4
- Move _HPX type array from stack to static data (Colin Ian King) - Avoid an ASMedia XHCI USB PME# defect; apparently it doesn't assert PME# when USB3.0 devices are hotplugged in D0 (Kai-Heng Feng) - Revert sysfs "rescan" file renames that broke an application (Kelsey Skunberg) * pci/misc: PCI: sysfs: Revert "rescan" file renames PCI: Avoid ASMedia XHCI USB PME# from D0 defect PCI/ACPI: Move pcie_to_hpx3_type[] from stack to static data
2020-03-30PCI: sysfs: Revert "rescan" file renamesKelsey Skunberg1-2/+4
We changed these sysfs filenames: .../pci_bus/<domain:bus>/rescan -> .../pci_bus/<domain:bus>/bus_rescan .../<domain:bus:dev.fn>/rescan -> .../<domain:bus:dev.fn>/dev_rescan and Ruslan reported [1] that this broke a userspace application. Revert these name changes so both files are named "rescan" again. Note that we have to use __ATTR() to assign custom C symbols, i.e., "struct device_attribute <symbol>". [1] https://lore.kernel.org/r/CAB=otbSYozS-ZfxB0nCiNnxcbqxwrHOSYxJJtDKa63KzXbXgpw@mail.gmail.com [bhelgaas: commit log, use __ATTR() both places so we don't have to rename the attributes] Fixes: 8bdfa145f582 ("PCI: sysfs: Define device attributes with DEVICE_ATTR*()") Fixes: 4e2b79436e4f ("PCI: sysfs: Change DEVICE_ATTR() to DEVICE_ATTR_WO()") Link: https://lore.kernel.org/r/20200325151708.32612-1-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <kelsey.skunberg@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org # v5.4+
2020-03-10PCI: Use pci_speed_string() for all PCI/PCI-X/PCIe stringsBjorn Helgaas1-22/+5
Previously some PCI speed strings came from pci_speed_string(), some came from the PCIe-specific PCIE_SPEED2STR(), and some came from a PCIe-specific switch statement. These methods were inconsistent: pci_speed_string() PCIE_SPEED2STR() switch ------------------ ---------------- ------ 33 MHz PCI ... 2.5 GT/s PCIe 2.5 GT/s 2.5 GT/s 5.0 GT/s PCIe 5 GT/s 5 GT/s 8.0 GT/s PCIe 8 GT/s 8 GT/s 16.0 GT/s PCIe 16 GT/s 16 GT/s 32.0 GT/s PCIe 32 GT/s 32 GT/s Standardize on pci_speed_string() as the single source of these strings. Note that this adds ".0" and "PCIe" to some messages, including sysfs "max_link_speed" files, a brcmstb "link up" message, and the link status dmesg logging, e.g., nvme 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:01.1 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) I think it's better to standardize on a single version of the speed text. Previously we had strings like this: /sys/bus/pci/slots/0/cur_bus_speed: 8.0 GT/s PCIe /sys/bus/pci/slots/0/max_bus_speed: 8.0 GT/s PCIe /sys/devices/pci0000:00/0000:00:1c.0/current_link_speed: 8 GT/s /sys/devices/pci0000:00/0000:00:1c.0/max_link_speed: 8 GT/s This changes the latter two to match the slots files: /sys/devices/pci0000:00/0000:00:1c.0/current_link_speed: 8.0 GT/s PCIe /sys/devices/pci0000:00/0000:00:1c.0/max_link_speed: 8.0 GT/s PCIe Based-on-patch by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-28Merge branch 'pci/resource'Bjorn Helgaas1-2/+2
- Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) * pci/resource: PCI: Do not use bus number zero from EA capability PCI: Avoid double hpmemsize MMIO window assignment PCI: Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters PCI: Add PCI_STD_NUM_BARS for the number of standard BARs PCI: Fix missing bridge dma_ranges resource list cleanup PCI: Protect pci_reassign_bridge_resources() against concurrent addition/removal
2019-11-28Merge branch 'pci/misc'Bjorn Helgaas1-18/+0
- Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) * pci/misc: drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/amdgpu: Correct Transmit Margin masks PCI: Add #defines for Enter Compliance, Transmit Margin PCI: Allow building PCIe things without PCIEPORTBUS PCI: Remove PCIe Kconfig dependencies on PCI PCI/ASPM: Remove dependency on PCIEPORTBUS PCI/PTM: Remove dependency on PCIEPORTBUS PCI/PTM: Remove spurious "d" from granularity message PCI: sysfs: Remove unused attribute groups x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect PCI: Remove unused includes and superfluous struct declaration x86/PCI: Replace deprecated EXTRA_CFLAGS with ccflags-y x86/PCI: Correct SPDX comment style x86/PCI: Add NumaChip SPDX GPL-2.0 to replace COPYING boilerplate
2019-11-21PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related codeHeiner Kallweit1-3/+0
Previously, CONFIG_PCIEASPM_DEBUG enabled "link_state" and "clk_ctl" sysfs files that controlled ASPM. We believe these files were rarely if ever used. We recently added sysfs ASPM controls that are always present, so the debug code is no longer needed. Removing this debug code has been discussed for quite some time, see e.g. [0]. Remove PCIEASPM_DEBUG and the related code. [0] https://lore.kernel.org/lkml/20180727202619.GD173328@bhelgaas-glaptop.roam.corp.google.com/ Link: https://lore.kernel.org/r/ec935d8e-c084-3938-f1d1-748617596b25@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-21PCI/ASPM: Add sysfs attributes for controlling ASPM link statesHeiner Kallweit1-0/+3
Add sysfs attributes to Endpoints and other Upstream Ports to control ASPM, Clock PM, and L1 PM Substates. The new attributes are: /sys/devices/pci*/.../link/clkpm /sys/devices/pci*/.../link/l0s_aspm /sys/devices/pci*/.../link/l1_aspm /sys/devices/pci*/.../link/l1_1_aspm /sys/devices/pci*/.../link/l1_2_aspm /sys/devices/pci*/.../link/l1_1_pcipm /sys/devices/pci*/.../link/l1_2_pcipm An attribute is only visible if both ends of the Link leading to the device support the state. Writing y/1/on to the file enables the state; n/0/off disables it. These attributes can be used to tune the power/performance tradeoff for individual devices. [bhelgaas: commit log, rename directory to "link"] Link: https://lore.kernel.org/r/b1c83f8a-9bf6-eac5-82d0-cf5b90128fbf@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-21PCI: sysfs: Remove unused attribute groupsBen Dooks1-18/+0
56c1af4606f0 ("PCI: Add sysfs max_link_speed/width, current_link_speed/width, etc") added the following objects, but they are unused, so remove them: pci_bridge_group pci_bridge_groups pcie_dev_group pcie_dev_groups This fixes the following warnings from sparse: drivers/pci/pci-sysfs.c:1546:30: warning: symbol 'pci_bridge_groups' was not declared. Should it be static? drivers/pci/pci-sysfs.c:1555:30: warning: symbol 'pcie_dev_groups' was not declared. Should it be static? Link: https://lore.kernel.org/r/20191016080324.12864-1-ben.dooks@codethink.co.uk Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-14PCI: Add PCI_STD_NUM_BARS for the number of standard BARsDenis Efremov1-2/+2
Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END. However, that requires the unusual test "i <= PCI_STD_RESOURCE_END" rather than something the typical "i < PCI_STD_NUM_BARS". Add a definition for PCI_STD_NUM_BARS and change loops to use the more idiomatic C style to help avoid fencepost errors. Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sebastian Ott <sebott@linux.ibm.com> # arch/s390/ Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> # video/fbdev/ Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> # pci/controller/dwc/ Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> # scsi/pm8001/ Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi/pm8001/ Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # memstick/
2019-09-28Merge branch 'next-lockdown' of ↵Linus Torvalds1-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull kernel lockdown mode from James Morris: "This is the latest iteration of the kernel lockdown patchset, from Matthew Garrett, David Howells and others. From the original description: This patchset introduces an optional kernel lockdown feature, intended to strengthen the boundary between UID 0 and the kernel. When enabled, various pieces of kernel functionality are restricted. Applications that rely on low-level access to either hardware or the kernel may cease working as a result - therefore this should not be enabled without appropriate evaluation beforehand. The majority of mainstream distributions have been carrying variants of this patchset for many years now, so there's value in providing a doesn't meet every distribution requirement, but gets us much closer to not requiring external patches. There are two major changes since this was last proposed for mainline: - Separating lockdown from EFI secure boot. Background discussion is covered here: https://lwn.net/Articles/751061/ - Implementation as an LSM, with a default stackable lockdown LSM module. This allows the lockdown feature to be policy-driven, rather than encoding an implicit policy within the mechanism. The new locked_down LSM hook is provided to allow LSMs to make a policy decision around whether kernel functionality that would allow tampering with or examining the runtime state of the kernel should be permitted. The included lockdown LSM provides an implementation with a simple policy intended for general purpose use. This policy provides a coarse level of granularity, controllable via the kernel command line: lockdown={integrity|confidentiality} Enable the kernel lockdown feature. If set to integrity, kernel features that allow userland to modify the running kernel are disabled. If set to confidentiality, kernel features that allow userland to extract confidential information from the kernel are also disabled. This may also be controlled via /sys/kernel/security/lockdown and overriden by kernel configuration. New or existing LSMs may implement finer-grained controls of the lockdown features. Refer to the lockdown_reason documentation in include/linux/security.h for details. The lockdown feature has had signficant design feedback and review across many subsystems. This code has been in linux-next for some weeks, with a few fixes applied along the way. Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode") is missing a Signed-off-by from its author. Matthew responded that he is providing this under category (c) of the DCO" * 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits) kexec: Fix file verification on S390 security: constify some arrays in lockdown LSM lockdown: Print current->comm in restriction messages efi: Restrict efivar_ssdt_load when the kernel is locked down tracefs: Restrict tracefs when the kernel is locked down debugfs: Restrict debugfs when the kernel is locked down kexec: Allow kexec_file() with appropriate IMA policy when locked down lockdown: Lock down perf when in confidentiality mode bpf: Restrict bpf when kernel lockdown is in confidentiality mode lockdown: Lock down tracing and perf kprobes when in confidentiality mode lockdown: Lock down /proc/kcore x86/mmiotrace: Lock down the testmmiotrace module lockdown: Lock down module params that specify hardware parameters (eg. ioport) lockdown: Lock down TIOCSSERIAL lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down acpi: Disable ACPI table override if the kernel is locked down acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down ACPI: Limit access to custom_method when the kernel is locked down x86/msr: Restrict MSR access when the kernel is locked down x86: Lock down IO port access when the kernel is locked down ...
2019-08-20PCI/IOV: Move sysfs SR-IOV functions to iov.cKelsey Skunberg1-173/+0
The sysfs SR-IOV functions are only needed when the kernel is built with SR-IOV support. Rather than put them in pci-sysfs.c under #ifdef CONFIG_PCI_IOV, move them to iov.c, which is only compiled when CONFIG_PCI_IOV=y. Link: https://lore.kernel.org/r/20190813204513.4790-4-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Donald Dutile <ddutile@redhat.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-08-20PCI: sysfs: Change permissions from symbolic to octalKelsey Skunberg1-11/+10
We prefer octal permissions over symbolic permissions such as "(S_IWUSR | S_IWGRP)". Change all symbolic permissions to octal permissions, e.g., - (S_IWUSR | S_IWGRP) + 0220 Link: https://lore.kernel.org/r/20190813204513.4790-3-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Donald Dutile <ddutile@redhat.com>
2019-08-20PCI: sysfs: Change DEVICE_ATTR() to DEVICE_ATTR_WO()Kelsey Skunberg1-6/+6
DEVICE_ATTR() should only be used when files have unusual permissions. Change DEVICE_ATTR() with '0220' write-only permissions to DEVICE_ATTR_WO(), e.g., - static DEVICE_ATTR(_name, (S_IWUSR | S_IWGRP), NULL, _store); + static DEVICE_ATTR_WO(_name); Since _store is no longer passed, make the _name passed by DEVICE_ATTR_WO() and the related _name##_store() name match with each other, e.g., DEVICE_ATTR_WO(bus_rescan) must be able to call bus_rescan_store() Link: https://lore.kernel.org/r/20190815153352.86143-4-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Donald Dutile <ddutile@redhat.com>
2019-08-20PCI: sysfs: Define device attributes with DEVICE_ATTR*()Kelsey Skunberg1-32/+27
Device attributes should be defined using DEVICE_ATTR*(_name, _mode, _show, _store). Convert them all from __ATTR*() to DEVICE_ATTR*(), e.g., - struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store) + static DEVICE_ATTR(foo, S_IWUSR | S_IRUGO, show_foo, store_foo) Link: https://lore.kernel.org/r/20190813204513.4790-2-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Donald Dutile <ddutile@redhat.com>
2019-08-19PCI: Lock down BAR access when the kernel is locked downMatthew Garrett1-0/+16
Any hardware that can potentially generate DMA has to be locked down in order to avoid it being possible for an attacker to modify kernel code, allowing them to circumvent disabled module loading or module signing. Default to paranoid - in future we can potentially relax this for sufficiently IOMMU-isolated devices. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Garrett <mjg59@google.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> cc: linux-pci@vger.kernel.org Signed-off-by: James Morris <jmorris@namei.org>
2019-06-21PCI: sysfs: Ignore lockdep for remove attributeMarek Vasut1-1/+1
With CONFIG_PROVE_LOCKING=y, using sysfs to remove a bridge with a device below it causes a lockdep warning, e.g., # echo 1 > /sys/class/pci_bus/0000:00/device/0000:00:00.0/remove ============================================ WARNING: possible recursive locking detected ... pci_bus 0000:01: busn_res: [bus 01] is released The remove recursively removes the subtree below the bridge. Each call uses a different lock so there's no deadlock, but the locks were all created with the same lockdep key so the lockdep checker can't tell them apart. Mark the "remove" sysfs attribute with __ATTR_IGNORE_LOCKDEP() as it is safe to ignore the lockdep check between different "remove" kernfs instances. There's discussion about a similar issue in USB at [1], which resulted in 356c05d58af0 ("sysfs: get rid of some lockdep false positives") and e9b526fe7048 ("i2c: suppress lockdep warning on delete_device"), which do basically the same thing for USB "remove" and i2c "delete_device" files. [1] https://lore.kernel.org/r/Pine.LNX.4.44L0.1204251436140.1206-100000@iolanthe.rowland.org Link: https://lore.kernel.org/r/20190526225151.3865-1-marek.vasut@gmail.com Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> [bhelgaas: trim commit log, details at above links] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Tejun Heo <tj@kernel.org> Cc: Wolfram Sang <wsa@the-dreams.de>
2019-06-13PCI: Decode PCIe 32 GT/s link speedGustavo Pimentel1-0/+3
PCIe r5.0, sec 7.5.3.18, defines a new 32.0 GT/s bit in the Supported Link Speeds Vector of Link Capabilities 2. Decode this new speed. This does not affect the speed of the link, which should be negotiated automatically by the hardware; it only adds decoding when showing the speed to the user. Previously, reading the speed of a link operating at this speed showed "Unknown speed" instead of "32.0 GT/s". Link: https://lore.kernel.org/lkml/92365e3caf0fc559f9ab14bcd053bfc92d4f661c.1559664969.git.gustavo.pimentel@synopsys.com Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-05-09PCI: Use dev_printk() when possibleBjorn Helgaas1-2/+1
Use dev_printk() when possible. This makes messages more consistent with other device-related messages and, in some cases, adds useful information. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-01-22PCI: pci-sysfs.c: convert to use BUS_ATTR_WOGreg Kroah-Hartman1-3/+2
We are trying to get rid of BUS_ATTR() and the usage of that in pci-sysfs.c can be trivially converted to use BUS_ATTR_WO(), so use that instead. Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-15Merge branch 'pci/hotplug'Bjorn Helgaas1-0/+2
- Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) * pci/hotplug: PCI: pciehp: Deduplicate presence check on probe & resume PCI: pciehp: Avoid implicit fallthroughs in switch statements PCI: Whitelist Thunderbolt ports for runtime D3 PCI: Whitelist native hotplug ports for runtime D3 PCI: sysfs: Resume to D0 on function reset PCI: pciehp: Resume parent to D0 on config space access PCI: pciehp: Resume to D0 on enable/disable PCI: pciehp: Support interrupts sent from D3hot PCI: pciehp: Obey compulsory command delay after resume PCI: pciehp: Clear spurious events earlier on resume PCI: portdrv: Deduplicate PM callback iterator PCI: pciehp: Avoid slot access during reset PCI: pciehp: Always enable occupied slot on probe PCI: pciehp: Become resilient to missed events PCI: pciehp: Tolerate initially unstable link PCI: pciehp: Declare pciehp_enable/disable_slot() static PCI: pciehp: Drop enable/disable lock PCI: pciehp: Enable/disable exclusively from IRQ thread PCI: pciehp: Track enable/disable status PCI: pciehp: Publish to user space last on probe PCI: hotplug: Demidlayer registration with the core PCI: pciehp: Drop slot workqueue PCI: pciehp: Handle events synchronously PCI: pciehp: Stop blinking on slot enable failure PCI: pciehp: Convert to threaded polling PCI: pciehp: Convert to threaded IRQ PCI: pciehp: Document struct slot and struct controller PCI: pciehp: Declare pciehp_unconfigure_device() void PCI: pciehp: Drop unnecessary NULL pointer check PCI: pciehp: Fix unprotected list iteration in IRQ handler PCI: pciehp: Fix use-after-free on unplug PCI: hotplug: Don't leak pci_slot on registration failure PCI: hotplug: Delete skeleton driver PCI: shpchp: Separate existence of SHPC and permission to use it
2018-08-15Merge branch 'pci/aspm'Bjorn Helgaas1-1/+0
- Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) * pci/aspm: PCI: Remove unnecessary include of <linux/pci-aspm.h> iwlwifi: Remove unnecessary include of <linux/pci-aspm.h> ath9k: Remove unnecessary include of <linux/pci-aspm.h> igb: Remove unnecessary include of <linux/pci-aspm.h> PCI/ASPM: Convert to use sysfs_match_string() helper
2018-08-06PCI: Remove unnecessary include of <linux/pci-aspm.h>Bjorn Helgaas1-1/+0
Several PCI core files include pci-aspm.h even though they don't need anything provided by that file. Remove the unnecessary includes of it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-07-31PCI: sysfs: Resume to D0 on function resetLukas Wunner1-0/+2
When performing a function reset via sysfs, the device's config space is accessed in places such as pcie_flr() and its MMIO space is accessed e.g. in reset_ivb_igd(), so ensure accessibility by resuming the device to D0. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Yinghai Lu <yinghai@kernel.org>
2018-07-19PCI/AER: Add sysfs attributes to provide AER stats and breakdownRajat Jain1-0/+3
Add sysfs attributes to provide total and breakdown of the AERs seen, into different type of correctable, fatal and nonfatal errors: /sys/bus/pci/devices/<dev>/aer_dev_correctable /sys/bus/pci/devices/<dev>/aer_dev_fatal /sys/bus/pci/devices/<dev>/aer_dev_nonfatal Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-25PCI: Prevent sysfs disable of device while driver is attachedChristoph Hellwig1-6/+9
Manipulating the enable_cnt behind the back of the driver will wreak complete havoc with the kernel state, so disallow it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Keith Busch <keith.busch@intel.com>
2018-04-04Merge branch 'pci/vpd'Bjorn Helgaas1-64/+3
- consolidate VPD code in vpd.c (Bjorn Helgaas) * pci/vpd: PCI/VPD: Move VPD structures to vpd.c PCI/VPD: Move VPD quirks to vpd.c PCI/VPD: Move VPD sysfs code to vpd.c PCI/VPD: Move VPD access code to vpd.c
2018-04-04Merge branch 'pci/virtualization'Bjorn Helgaas1-2/+1
- probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) * pci/virtualization: PCI/IOV: Add missing prototypes for powerpc pcibios interfaces PCI/IOV: Use VF0 cached config registers for other VFs PCI/IOV: Skip BAR sizing for VFs PCI/IOV: Skip INTx config reads for VFs PCI: Wait for device to become ready after secondary bus reset PCI: Add a return type for pci_reset_bridge_secondary_bus() PCI: Wait for device to become ready after a power management reset PCI: Rename pci_flr_wait() to pci_dev_wait() and make it generic PCI: Handle FLR failure and allow other reset types PCI: Protect restore with device lock to be consistent PCI: Add function 1 DMA alias quirk for Marvell 88SE9220 PCI: Add ACS quirk for Ampere root ports PCI: Remove redundant probes for device reset support PCI: Probe for device reset support during enumeration Conflicts: include/linux/pci.h
2018-04-04Merge branch 'pci/misc'Bjorn Helgaas1-3/+0
- use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) * pci/misc: PCI: Always define the of_node helpers PCI: Tidy comments PCI: Tidy Makefiles mcb: Add Altera PCI ID to mcb-pci PCI: Add Altera vendor ID PCI: Report quirks that take more than 10ms PCI: Report quirk timings with pci_info() instead of pr_debug() PCI: Fix NULL pointer dereference in of_pci_bus_find_domain_nr() rapidio/tsi721: use PCI_EXP_DEVCTL2_COMP_TIMEOUT macro
2018-03-30PCI: Add pcie_get_width_cap() to find max supported link widthTal Gilboa1-8/+2
Add pcie_get_width_cap() to find the max link width supported by a device. Change max_link_width_show() to use pcie_get_width_cap(). Signed-off-by: Tal Gilboa <talgi@mellanox.com> [bhelgaas: return width directly instead of error and *width, don't export outside drivers/pci] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2018-03-30PCI: Add pcie_get_speed_cap() to find max supported link speedTal Gilboa1-26/+2
Add pcie_get_speed_cap() to find the max link speed supported by a device. Change max_link_speed_show() to use pcie_get_speed_cap(). Signed-off-by: Tal Gilboa <talgi@mellanox.com> [bhelgaas: return speed directly instead of error and *speed, don't export outside drivers/pci] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2018-03-21PCI: Add decoding for 16 GT/s link speedJay Fang1-0/+6
PCIe 4.0 defines the 16.0 GT/s link speed. Links can run at that speed without any Linux changes, but previously their sysfs "max_link_speed" and "current_link_speed" files contained "Unknown speed", not the expected "16.0 GT/s". Add decoding for the new 16 GT/s link speed. Signed-off-by: Jay Fang <f.fangjian@huawei.com> [bhelgaas: add PCI_EXP_LNKCAP2_SLS_16_0GB] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dongdong Liu <liudongdong3@huawei.com>
2018-03-19PCI: Tidy commentsBjorn Helgaas1-3/+0
Remove pointless comments that tell us the file name, remove blank line comments, follow multi-line comment conventions. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19PCI/VPD: Move VPD sysfs code to vpd.cBjorn Helgaas1-64/+3
Move the VPD-related sysfs code from pci-sysfs.c to vpd.c. This follows the pattern of pcie_aspm_create_sysfs_dev_files(). The goal is to encapsulate all the VPD code and structures in vpd.c. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-02-16PCI: Probe for device reset support during enumerationBjorn Helgaas1-2/+1
Previously we called pci_probe_reset_function() in this path: pci_sysfs_init # late_initcall for_each_pci_dev(dev) pci_create_sysfs_dev_files(dev) pci_create_capabilities_sysfs(dev) pci_probe_reset_function pci_dev_specific_reset pcie_has_flr pcie_capability_read_dword pci_sysfs_init() is a late_initcall, and a driver may have already claimed one of these devices and enabled runtime power management for it, so the device could already be in D3 by the time we get to pci_sysfs_init(). The device itself should respond to the config read even while it's in D3hot, but if an upstream bridge is also in D3hot, the read won't even reach the device because the bridge won't forward it downstream to the device. If the bridge is a PCIe port, it should complete the read as an Unsupported Request, which may be reported to the CPU as an exception or as invalid data. Avoid this case by probing for reset support from pci_init_capabilities(), before a driver can claim the device. The device may be in D3hot, but any bridges leading to it should be in D0, so the device's config space should be fully accessible at that point. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-31Merge branch 'pci/virtualization' into nextBjorn Helgaas1-0/+11
* pci/virtualization: PCI: Expose ari_enabled in sysfs PCI: Add function 1 DMA alias quirk for Marvell 9128 PCI: Mark Ceton InfiniTV4 INTx masking as broken xen/pci: Use acpi_noirq_set() helper to avoid #ifdef
2018-01-31Merge branch 'pci/resource' into nextBjorn Helgaas1-7/+2
* pci/resource: PCI: tegra: Remove PCI_REASSIGN_ALL_BUS use on Tegra resource: Set type when reserving new regions resource: Set type of "reserve=" user-specified resources irqchip/i8259: Set I/O port resource types correctly powerpc: Set I/O port resource types correctly MIPS: Set I/O port resource types correctly vgacon: Set VGA struct resource types PCI: Use dev_info() rather than dev_err() for ROM validation PCI: Remove PCI_REASSIGN_ALL_RSRC use on arm and arm64 PCI: Remove sysfs resource mmap warning Conflicts: drivers/pci/rom.c
2018-01-23PCI: Expose ari_enabled in sysfsStuart Hayes1-0/+11
Some multifunction PCI devices with more than 8 functions use "alternative routing-ID interpretation" (ARI), which means the 8-bit device/function number field will be interpreted as 8 bits specifying the function number (the device number is 0 implicitly), rather than the upper 5 bits specifying the device number and the lower 3 bits specifying the function number. The kernel can enable and use this. Expose in a sysfs attribute whether the kernel has enabled ARI, so that a program in userspace won't have to parse PCI devices and PCI configuration space to figure out if it is enabled. This will allow better predictable network naming using PCI function numbers without using PCI bus or device numbers, which is desirable because bus and device numbers can change with system configuration but function numbers will not. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-01-18PCI: Add wrappers for dev_printk()Frederick Lawler1-5/+5
Add PCI-specific dev_printk() wrappers and use them to simplify the code slightly. No functional change intended. Signed-off-by: Frederick Lawler <fred@fredlawl.com> [bhelgaas: squash into one patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-12-18PCI: Remove sysfs resource mmap warningBjorn Helgaas1-7/+2
When a process uses sysfs and tries to mmap more space than is available in a PCI BAR, we emit a warning and a backtrace. The mmap fails anyway, so the backtrace is mainly for debugging. But in general we don't emit kernel messages when syscalls return failure. The similar procfs mmap path simply fails the mmap with no warning. Remove the sysfs warning. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-15Merge tag 'pci-v4.15-changes' of ↵Linus Torvalds1-1/+34
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-14Merge branch 'pci/virtualization' into nextBjorn Helgaas1-0/+33
* pci/virtualization: PCI: Document reset method return values PCI: Detach driver before procfs & sysfs teardown on device remove PCI: Apply Cavium ThunderX ACS quirk to more Root Ports PCI: Set Cavium ACS capability quirk flags to assert RR/CR/SV/UF PCI: Restore ARI Capable Hierarchy before setting numVFs PCI: Create SR-IOV virtfn/physfn links before attaching driver PCI: Expose SR-IOV offset, stride, and VF device ID via sysfs PCI: Cache the VF device ID in the SR-IOV structure PCI: Add Kconfig PCI_IOV dependency for PCI_REALLOC_ENABLE_AUTO PCI: Remove unused function __pci_reset_function() PCI: Remove reset argument from pci_iov_{add,remove}_virtfn()
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-10PCI: Expose SR-IOV offset, stride, and VF device ID via sysfsFilippo Sironi1-0/+33
Expose the SR-IOV device offset, stride, and VF device ID via sysfs to make it easier for userspace applications to consume them. Signed-off-by: Filippo Sironi <sironi@amazon.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-10-05PCI: Constify pci_dev_type structureBhumika Goyal1-1/+1
Make this const as it not modified in the file referencing it. It is only stored in a const field 'type' of a device structure. Also, add const to the variable declaration in the header file. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 01:29:15 +0000