summaryrefslogtreecommitdiff
path: root/drivers/of
AgeCommit message (Collapse)AuthorFilesLines
2022-08-12Merge tag 'riscv-for-linus-5.20-mw2' of ↵Linus Torvalds1-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "There's still a handful of new features in here, but there are a lot of fixes/cleanups as well: - Support for the Zicbom extension for explicit cache-block management, along with the necessary bits to make the non-standard cache management ops on the Allwinner D1 function - Support for the Zihintpause extension, which codifies a go-slow instruction used for cpu_relax() - Support for the Sstc extension for supervisor-mode timer/counter management - Many device tree fixes and cleanups, including a large set for the Canaan device trees - A handful of fixes and cleanups for the PMU driver" * tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits) dt-bindings: gpio: sifive: add gpio-line-names wireguard: selftests: set CONFIG_NONPORTABLE on riscv32 RISC-V: KVM: Support sstc extension RISC-V: Improve SBI definitions RISC-V: Move counter info definition to sbi header file RISC-V: Fix SBI PMU calls for RV32 RISC-V: Update user page mapping only once during start RISC-V: Fix counter restart during overflow for RV32 RISC-V: Prefer sstc extension if available RISC-V: Enable sstc extension parsing from DT RISC-V: Add SSTC extension CSR details riscv:uprobe fix SR_SPIE set/clear handling dt-bindings: riscv: fix SiFive l2-cache's cache-sets riscv: ensure cpu_ops_sbi is declared RISC-V: cpu_ops_spinwait.c should include head.h RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h> riscv: dts: starfive: correct number of external interrupts riscv: dts: sifive unmatched: Add PWM controlled LEDs riscv/purgatory: Omit use of bin2c riscv/purgatory: hard-code obj-y in Makefile ...
2022-08-10riscv: implement Zicbom-based CMO instructions + the t-head variantPalmer Dabbelt1-7/+10
This series is based on the alternatives changes done in my svpbmt series and thus also depends on Atish's isa-extension parsing series. It implements using the cache-management instructions from the Zicbom- extension to handle cache flush, etc actions on platforms needing them. SoCs using cpu cores from T-Head like the Allwinne D1 implement a different set of cache instructions. But while they are different, instructions they provide the same functionality, so a variant can easly hook into the existing alternatives mechanism on those. [Palmer: Some minor fixups, including a RISCV_ISA_ZICBOM dependency on MMU that's probably not strictly necessary. The Zicbom support will trip up sparse for users that have new toolchains, I just sent a patch.] Link: https://lore.kernel.org/all/20220706231536.2041855-1-heiko@sntech.de/ Link: https://lore.kernel.org/linux-sparse/20220811033138.20676-1-palmer@rivosinc.com/T/#u * palmer/riscv-zicbom: riscv: implement cache-management errata for T-Head SoCs riscv: Add support for non-coherent devices using zicbom extension dt-bindings: riscv: document cbom-block-size of: also handle dma-noncoherent in of_dma_is_coherent()
2022-08-08Merge tag 'tty-6.0-rc1' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.0-rc1. It was delayed from last week as I wanted to make sure the last commit here got some good testing in linux-next and elsewhere as it seemed to show up only late in testing for some reason. Nothing major here, just lots of cleanups from Jiri and Ilpo to make the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo). Also included in here is the obligatory n_gsm updates from Daniel Starke and lots of tiny driver updates and minor fixes and tweaks for other smaller serial drivers. All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements tty: amiserial: Fix comment typo tty: serial: document uart_get_console() tty: serial: serial_core, reformat kernel-doc for functions Documentation: serial: link uart_ops properly Documentation: serial: move GPIO kernel-doc to the functions Documentation: serial: dedup kernel-doc for uart functions Documentation: serial: move uart_ops documentation to the struct dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126 serial: mvebu-uart: uart2 error bits clearing tty: serial: fsl_lpuart: correct the count of break characters serial: stm32: make info structs static to avoid sparse warnings serial: fsl_lpuart: zero out parity bit in CS7 mode tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate. serial: 8250_bcm2835aux: Add missing clk_disable_unprepare() tty: vt: initialize unicode screen buffer serial: remove VR41XX serial driver serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags serial: 8250_dwlib: remove redundant sanity check for RS485 flags dt_bindings: rs485: Correct delay values ...
2022-08-05Merge tag 'mm-stable-2022-08-03' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Most of the MM queue. A few things are still pending. Liam's maple tree rework didn't make it. This has resulted in a few other minor patch series being held over for next time. Multi-gen LRU still isn't merged as we were waiting for mapletree to stabilize. The current plan is to merge MGLRU into -mm soon and to later reintroduce mapletree, with a view to hopefully getting both into 6.1-rc1. Summary: - The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe Lin, Yang Shi, Anshuman Khandual and Mike Rapoport - Some kmemleak fixes from Patrick Wang and Waiman Long - DAMON updates from SeongJae Park - memcg debug/visibility work from Roman Gushchin - vmalloc speedup from Uladzislau Rezki - more folio conversion work from Matthew Wilcox - enhancements for coherent device memory mapping from Alex Sierra - addition of shared pages tracking and CoW support for fsdax, from Shiyang Ruan - hugetlb optimizations from Mike Kravetz - Mel Gorman has contributed some pagealloc changes to improve latency and realtime behaviour. - mprotect soft-dirty checking has been improved by Peter Xu - Many other singleton patches all over the place" [ XFS merge from hell as per Darrick Wong in https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ] * tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits) tools/testing/selftests/vm/hmm-tests.c: fix build mm: Kconfig: fix typo mm: memory-failure: convert to pr_fmt() mm: use is_zone_movable_page() helper hugetlbfs: fix inaccurate comment in hugetlbfs_statfs() hugetlbfs: cleanup some comments in inode.c hugetlbfs: remove unneeded header file hugetlbfs: remove unneeded hugetlbfs_ops forward declaration hugetlbfs: use helper macro SZ_1{K,M} mm: cleanup is_highmem() mm/hmm: add a test for cross device private faults selftests: add soft-dirty into run_vmtests.sh selftests: soft-dirty: add test for mprotect mm/mprotect: fix soft-dirty check in can_change_pte_writable() mm: memcontrol: fix potential oom_lock recursion deadlock mm/gup.c: fix formatting in check_and_migrate_movable_page() xfs: fail dax mount if reflink is enabled on a partition mm/memcontrol.c: remove the redundant updating of stats_flush_threshold userfaultfd: don't fail on unrecognized features hugetlb_cgroup: fix wrong hugetlb cgroup numa stat ...
2022-08-04Merge tag 'devicetree-for-6.0' of ↵Linus Torvalds7-35/+48
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "Bindings: - Add spi-peripheral-props.yaml references to various SPI device bindings - Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x, skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm CCN PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and arm-firmware-suite bindings to DT schema format - New bindings for Arm virtual platforms display, Qualcomm IMEM memory region, Samsung S5PV210 ChipID, EM Microelectronic EM3027 RTC, and arm,cortex-a78ae - Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec, quanta, and densitron - Add missing MSI and IOMMU properties to host-generic-pci - Remove bindings for removed EFM32 platform - Remove old chosen.txt binding (replaced by schema) - Treewide add missing type information for properties - Treewide fixing of typos and its vs. it's in bindings. Its all good now. - Drop unnecessary quoting in power related schemas - Several LED binding updates which didn't get picked up - Move various bindings to proper directories DT core code: - Convert unittest GPIO related tests to use fwnode - Check ima-kexec-buffer against memory bounds - Print reserved-memory allocation/reservation failures as errors - Cleanup early_init_dt_reserve_memory_arch() - Simplify of_overlay_fdt_apply() tail" * tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (65 commits) dt-bindings: mtd: microchip,mchp48l640: use spi-peripheral-props.yaml dt-bindings: power: supply: drop quotes when not needed dt-bindings: power: reset: drop quotes when not needed dt-bindings: power: drop quotes when not needed dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI properties of/fdt: declared return type does not match actual return type devicetree/bindings: correct possessive "its" typos dt-bindings: net: convert emac_rockchip.txt to YAML dt-bindings: eeprom: microchip,93lc46b: move to eeprom directory dt-bindings: eeprom: at25: use spi-peripheral-props.yaml dt-bindings: display: use spi-peripheral-props.yaml dt-bindings: watchdog: qcom,pm8916-wdt: convert to dtschema dt-bindings: power: reset: qcom,pon: use absolute path to other schema dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts' dt-bindings: power: supply: charger-manager: Add missing type for 'cm-battery-stat' dt-bindings: panel: raydium,rm67191: Add missing type to 'video-mode' of/fdt: Clean up early_init_dt_reserve_memory_arch() dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high' dt-bindings: rtc: Add EM Microelectronic EM3027 bindings dt-bindings: rtc: ds1307: Convert to json-schema ...
2022-08-04Merge tag 'driver-core-6.0-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core / kernfs updates from Greg KH: "Here is the set of driver core and kernfs changes for 6.0-rc1. The "biggest" thing in here is some scalability improvements for kernfs for large systems. Other than that, included in here are: - arch topology and cache info changes that have been reviewed and discussed a lot. - potential error path cleanup fixes - deferred driver probe cleanups - firmware loader cleanups and tweaks - documentation updates - other small things All of these have been in the linux-next tree for a while with no reported problems" * tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits) docs: embargoed-hardware-issues: fix invalid AMD contact email firmware_loader: Replace kmap() with kmap_local_page() sysfs docs: ABI: Fix typo in comment kobject: fix Kconfig.debug "its" grammar kernfs: Fix typo 'the the' in comment docs: driver-api: firmware: add driver firmware guidelines. (v3) arch_topology: Fix cache attributes detection in the CPU hotplug path ACPI: PPTT: Leave the table mapped for the runtime usage cacheinfo: Use atomic allocation for percpu cache attributes drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist MAINTAINERS: Change mentions of mpm to olivia docs: ABI: sysfs-devices-soc: Update Lee Jones' email address docs: ABI: sysfs-class-pwm: Update Lee Jones' email address Documentation/process: Add embargoed HW contact for LLVM Revert "kernfs: Change kernfs_notify_list to llist." ACPI: Remove the unused find_acpi_cpu_cache_topology() arch_topology: Warn that topology for nested clusters is not supported arch_topology: Add support for parsing sockets in /cpu-map arch_topology: Set cluster identifier in each core/thread from /cpu-map arch_topology: Limit span of cpu_clustergroup_mask() ...
2022-08-01of/fdt: declared return type does not match actual return typeXu Qiang1-1/+1
The commit 649cab56de8e (“of: properly check for error returned by fdt_get_name()”) changed the return value type from bool to int, but forgot to change the return value simultaneously. populate_node was only called in unflatten_dt_nodes, and returns with values greater than or equal to 0 were discarded without further processing. Considering that return 0 usually indicates success, return 0 instead of return true. Fixes: 649cab56de8e (“of: properly check for error returned by fdt_get_name()”) Signed-off-by: Xu Qiang <xuqiang36@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220801120506.11461-2-xuqiang36@huawei.com
2022-07-28of: also handle dma-noncoherent in of_dma_is_coherent()Heiko Stuebner1-7/+10
of_dma_is_coherent() currently expects the architecture to be non-coherent and some devices being coherent getting marked as such with the dma-coherent devicetree property. For PowerPC CONFIG_OF_DMA_DEFAULT_COHERENT was added which currently makes of_dma_is_coherent() always return true but doesn't handle the case of the architecture being coherent but some devices not. So modify the function to also check for dma-noncoherent and set a suitable default return value. If CONFIG_OF_DMA_DEFAULT_COHERENT is set the value starts with true and finding dma-noncoherent will set it to false and without CONFIG_OF_DMA_DEFAULT_COHERENT, the behaviour is reversed. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220706231536.2041855-2-heiko@sntech.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-07-25of/fdt: Clean up early_init_dt_reserve_memory_arch()Peter Collingbourne1-7/+6
As of commit 18250b43f7b6 ("of: fdt: Remove early_init_dt_reserve_memory_arch() override capability") this is no longer an arch hook, so rename it to remove the confusing _arch suffix. Also remove some unnecessary indirection from all but one of the callers by calling memblock_reserve() directly instead. Signed-off-by: Peter Collingbourne <pcc@google.com> Link: https://linux-review.googlesource.com/id/I3362bdd92ae6e47e8f5bac01aa228d32f9d01aad Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220723015331.1607029-1-pcc@google.com
2022-07-19of: overlay: Simplify of_overlay_fdt_apply() tailGeert Uytterhoeven1-7/+2
It does not hurt to fill in the changeset id while the mutex is still held. After doing so, the function tails for the success and failure cases become identical, so they can be unified. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Tested-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/6a3357a8f7f29704350e3ffae768ee8a462b54d3.1657893306.git.geert+renesas@glider.be
2022-07-19of: overlay: Move devicetree_corrupt() check upGeert Uytterhoeven1-6/+5
There is no point in doing several preparatory steps in of_overlay_fdt_apply(), only to see of_overlay_apply() return early because of a corrupt device tree. Move the check for a corrupt device tree from of_overlay_apply() to of_overlay_fdt_apply(), to check for this as early as possible. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Tested-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/c91ce7112eb5167ea46a43d8a980e76b920010ba.1657893306.git.geert+renesas@glider.be
2022-07-12of: device: Fix missing of_node_put() in of_dma_set_restricted_bufferLiang He1-1/+4
We should use of_node_put() for the reference 'node' returned by of_parse_phandle() which will increase the refcount. Fixes: fec9b625095f ("of: Add plumbing for restricted DMA pool") Co-authored-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220702014449.263772-1-windhl@126.com
2022-07-11of: unittest: make unittest_gpio_remove() consistent with unittest_gpio_probe()Andy Shevchenko1-7/+6
On the ->remove() stage the callback uses physical device node instead of one from GPIO chip and the variable name which is different to one used in unittest_gpio_probe(). Make these consistent with unittest_gpio_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220708214539.7254-2-andriy.shevchenko@linux.intel.com
2022-07-11of: unittest: Switch to use fwnode instead of of_nodeAndy Shevchenko1-2/+2
The OF node in the GPIO library is deprecated and soon will be removed. GPIO library now accepts fwnode as a firmware node, so switch the module to use it instead. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220708214539.7254-1-andriy.shevchenko@linux.intel.com
2022-07-01x86/kexec: Carry forward IMA measurement log on kexecJonathan McDowell1-8/+5
On kexec file load, the Integrity Measurement Architecture (IMA) subsystem may verify the IMA signature of the kernel and initramfs, and measure it. The command line parameters passed to the kernel in the kexec call may also be measured by IMA. A remote attestation service can verify a TPM quote based on the TPM event log, the IMA measurement list and the TPM PCR data. This can be achieved only if the IMA measurement log is carried over from the current kernel to the next kernel across the kexec call. PowerPC and ARM64 both achieve this using device tree with a "linux,ima-kexec-buffer" node. x86 platforms generally don't make use of device tree, so use the setup_data mechanism to pass the IMA buffer to the new kernel. Signed-off-by: Jonathan McDowell <noodles@fb.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> # IMA function definitions Link: https://lore.kernel.org/r/YmKyvlF3my1yWTvK@noodles-fedora-PC23Y6EG
2022-06-30earlycon: prevent multiple register_console()Michael Walle1-1/+3
If the earlycon parameter is given twice, the kernel will spit out a WARN() in register_console() because it was already registered. The non-dt variant setup_earlycon() already handles that gracefully. The dt variant of_setup_earlycon() doesn't. Add the check there and add the -EALREADY handling in early_init_dt_scan_chosen_stdout(). FWIW, this doesn't happen if CONFIG_ACPI_SPCR_TABLE is set. In that case the registration is delayed until after earlycon parameter(s) are parsed. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220628120705.200617-1-michael@walle.cc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-28of: reserved-memory: Print allocation/reservation failures as errorVincent Whitchurch2-3/+4
If the allocation/reservation of reserved-memory fails, it is normally an error, so print it as an error so that it doesn't get hidden from the console due to the loglevel. Also make the allocation failure include the size just like the reservation failure. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220628113540.2790835-1-vincent.whitchurch@axis.com
2022-06-28of: Drop duplicate 'the' in of_find_last_cache_level kerneldocDeming Wang1-1/+1
Delete duplicate words of "the". Signed-off-by: Deming Wang <wangdeming@inspur.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220624011247.1735-1-wangdeming@inspur.com
2022-06-27of: base: Avoid console probe delay when fw_devlink.strict=1Saravana Kannan1-0/+2
Commit 71066545b48e ("driver core: Set fw_devlink.strict=1 by default") enabled iommus and dmas dependency enforcement by default. On some systems, this caused the console device's probe to get delayed until the deferred_probe_timeout expires. We need consoles to work as soon as possible, so mark the console device node with FWNODE_FLAG_BEST_EFFORT so that fw_delink knows not to delay the probe of the console device for suppliers without drivers. The driver can then make the decision on where it can probe without those suppliers or defer its probe. Fixes: 71066545b48e ("driver core: Set fw_devlink.strict=1 by default") Reported-by: Sascha Hauer <sha@pengutronix.de> Reported-by: Peng Fan <peng.fan@nxp.com> Tested-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220623080344.783549-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-16mm: kmemleak: remove kmemleak_not_leak_phys() and the min_count argument to ↵Patrick Wang1-1/+1
kmemleak_alloc_phys() Patch series "mm: kmemleak: store objects allocated with physical address separately and check when scan", v4. The kmemleak_*_phys() interface uses "min_low_pfn" and "max_low_pfn" to check address. But on some architectures, kmemleak_*_phys() is called before those two variables initialized. The following steps will be taken: 1) Add OBJECT_PHYS flag and rbtree for the objects allocated with physical address 2) Store physical address in objects if allocated with OBJECT_PHYS 3) Check the boundary when scan instead of in kmemleak_*_phys() This patch set will solve: https://lore.kernel.org/r/20220527032504.30341-1-yee.lee@mediatek.com https://lore.kernel.org/r/9dd08bb5-f39e-53d8-f88d-bec598a08c93@gmail.com v3: https://lore.kernel.org/r/20220609124950.1694394-1-patrick.wang.shcn@gmail.com v2: https://lore.kernel.org/r/20220603035415.1243913-1-patrick.wang.shcn@gmail.com v1: https://lore.kernel.org/r/20220531150823.1004101-1-patrick.wang.shcn@gmail.com This patch (of 4): Remove the unused kmemleak_not_leak_phys() function. And remove the min_count argument to kmemleak_alloc_phys() function, assume it's 0. Link: https://lkml.kernel.org/r/20220611035551.1823303-1-patrick.wang.shcn@gmail.com Link: https://lkml.kernel.org/r/20220611035551.1823303-2-patrick.wang.shcn@gmail.com Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Yee Lee <yee.lee@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-07of: check previous kernel's ima-kexec-buffer against memory boundsVaibhav Jain1-0/+17
Presently ima_get_kexec_buffer() doesn't check if the previous kernel's ima-kexec-buffer lies outside the addressable memory range. This can result in a kernel panic if the new kernel is booted with 'mem=X' arg and the ima-kexec-buffer was allocated beyond that range by the previous kernel. The panic is usually of the form below: $ sudo kexec --initrd initrd vmlinux --append='mem=16G' <snip> BUG: Unable to handle kernel data access on read at 0xc000c01fff7f0000 Faulting instruction address: 0xc000000000837974 Oops: Kernel access of bad area, sig: 11 [#1] <snip> NIP [c000000000837974] ima_restore_measurement_list+0x94/0x6c0 LR [c00000000083b55c] ima_load_kexec_buffer+0xac/0x160 Call Trace: [c00000000371fa80] [c00000000083b55c] ima_load_kexec_buffer+0xac/0x160 [c00000000371fb00] [c0000000020512c4] ima_init+0x80/0x108 [c00000000371fb70] [c0000000020514dc] init_ima+0x4c/0x120 [c00000000371fbf0] [c000000000012240] do_one_initcall+0x60/0x2c0 [c00000000371fcc0] [c000000002004ad0] kernel_init_freeable+0x344/0x3ec [c00000000371fda0] [c0000000000128a4] kernel_init+0x34/0x1b0 [c00000000371fe10] [c00000000000ce64] ret_from_kernel_thread+0x5c/0x64 Instruction dump: f92100b8 f92100c0 90e10090 910100a0 4182050c 282a0017 3bc00000 40810330 7c0802a6 fb610198 7c9b2378 f80101d0 <a1240000> 2c090001 40820614 e9240010 ---[ end trace 0000000000000000 ]--- Fix this issue by checking returned PFN range of previous kernel's ima-kexec-buffer with page_is_ram() to ensure correct memory bounds. Fixes: 467d27824920 ("powerpc: ima: get the kexec buffer passed by the previous kernel") Cc: Frank Rowand <frowand.list@gmail.com> Cc: Prakhar Srivastava <prsriva@linux.microsoft.com> Cc: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: Rob Herring <robh@kernel.org> Cc: Ritesh Harjani <ritesh.list@gmail.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220531041446.3334259-1-vaibhav@linux.ibm.com
2022-05-25Merge tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-19/+64
Pull drm updates from Dave Airlie: "Intel have enabled DG2 on certain SKUs for laptops, AMD has started some new GPU support, msm has user allocated VA controls dma-buf: - add dma_resv_replace_fences - add dma_resv_get_singleton - make dma_excl_fence private core: - EDID parser refactorings - switch drivers to drm_mode_copy/duplicate - DRM managed mutex initialization display-helper: - put HDMI, SCDC, HDCP, DSC and DP into new module gem: - rework fence handling ttm: - rework bulk move handling - add common debugfs for resource managers - convert to kvcalloc format helpers: - support monochrome formats - RGB888, RGB565 to XRGB8888 conversions fbdev: - cfb/sys_imageblit fixes - pagelist corruption fix - create offb platform device - deferred io improvements sysfb: - Kconfig rework - support for VESA mode selection bridge: - conversions to devm_drm_of_get_bridge - conversions to panel_bridge - analogix_dp - autosuspend support - it66121 - audio support - tc358767 - DSI to DPI support - icn6211 - PLL/I2C fixes, DT property - adv7611 - enable DRM_BRIDGE_OP_HPD - anx7625 - fill ELD if no monitor - dw_hdmi - add audio support - lontium LT9211 support, i.MXMP LDB - it6505: Kconfig fix, DPCD set power fix - adv7511 - CEC support for ADV7535 panel: - ltk035c5444t, B133UAN01, NV3052C panel support - DataImage FG040346DSSWBG04 support - st7735r - DT bindings fix - ssd130x - fixes i915: - DG2 laptop PCI-IDs ("motherboard down") - Initial RPL-P PCI IDs - compute engine ABI - DG2 Tile4 support - DG2 CCS clear color compression support - DG2 render/media compression formats support - ATS-M platform info - RPL-S PCI IDs added - Bump ADL-P DMC version to v2.16 - Support static DRRS - Support multiple eDP/LVDS native mode refresh rates - DP HDR support for HSW+ - Lots of display refactoring + fixes - GuC hwconfig support and query - sysfs support for multi-tile - fdinfo per-client gpu utilisation - add geometry subslices query - fix prime mmap with LMEM - fix vm open count and remove vma refcounts - contiguous allocation fixes - steered register write support - small PCI BAR enablement - GuC error capture support - sunset igpu legacy mmap support for newer devices - GuC version 70.1.1 support amdgpu: - Initial SoC21 support - SMU 13.x enablement - SMU 13.0.4 support - ttm_eu cleanups - USB-C, GPUVM updates - TMZ fixes for RV - RAS support for VCN - PM sysfs code cleanup - DC FP rework - extend CG/PG flags to 64-bit - SI dpm lockdep fix - runtime PM fixes amdkfd: - RAS/SVM fixes - TLB flush fixes - CRIU GWS support - ignore bogus MEC signals more efficiently msm: - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - DPU: DSC (Display Stream Compression) support - DP: eDP support - DP: conversion to use drm_bridge and drm_bridge_connector - Merge DPU1 and MDP5 MDSS driver - DPU: writeback support nouveau: - make some structures static - make some variables static - switch to drm_gem_plane_helper_prepare_fb radeon: - misc fixes/cleanups mxsfb: - rework crtc mode setting - LCDIF CRC support etnaviv: - fencing improvements - fix address space collisions - cleanup MMU reference handling gma500: - GEM/GTT improvements - connector handling fixes komeda: - switch to plane reset helper mediatek: - MIPI DSI improvements omapdrm: - GEM improvements qxl: - aarch64 support vc4: - add a CL submission tracepoint - HDMI YUV support - HDMI/clock improvements - drop is_hdmi caching virtio: - remove restriction of non-zero blob types vmwgfx: - support for cursormob and cursorbypass 4 - fence improvements tidss: - reset DISPC on startup solomon: - SPI support - DT improvements sun4i: - allwinner D1 support - drop is_hdmi caching imx: - use swap() instead of open-coding - use devm_platform_ioremap_resource - remove redunant initializations ast: - Displayport support rockchip: - Refactor IOMMU initialisation - make some structures static - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi - support swapped YUV formats, - clock improvements - rk3568 support - VOP2 support mediatek: - MT8186 support tegra: - debugabillity improvements" * tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits) drm/i915/dsi: fix VBT send packet port selection for ICL+ drm/i915/uc: Fix undefined behavior due to shift overflowing the constant drm/i915/reg: fix undefined behavior due to shift overflowing the constant drm/i915/gt: Fix use of static in macro mismatch drm/i915/audio: fix audio code enable/disable pipe logging drm/i915: Fix CFI violation with show_dynamic_id() drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c drm/i915/gt: Fix build error without CONFIG_PM drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations drm/msm: don't free the IRQ if it was not requested drm/msm/dpu: limit writeback modes according to max_linewidth drm/amd: Don't reset dGPUs if the system is going to s2idle drm/amdgpu: Unmap legacy queue when MES is enabled drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm/msm: Fix fb plane offset calculation drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init drm/msm/dsi: don't powerup at modeset time for parade-ps8640 drm/rockchip: Change register space names in vop2 dt-bindings: display: rockchip: make reg-names mandatory for VOP2 ...
2022-05-25Merge tag 'devicetree-for-5.19' of ↵Linus Torvalds12-187/+475
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "Bindings: - Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm, qcom,i2c-qup, qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new props), qcom,smp2p, TI timer, Mediatek gnss, Mediatek topckgen, Mediatek apmixedsys, Mediatek infracfg, fsl,ls-extirq, fsl,layerscape-dcfg, QCom PMIC SPMI, rda,8810pl-timer, Xilinx zynqmp_ipi, uniphier-pcie, and Ilitek touchscreen controllers - Convert various Arm Ltd peripheral IP bindings to schemas - New bindings for Menlo board CPLD, DH electronics board CPLD, Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751 GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and Microchip/SMSC LAN95xx USB Ethernet controllers - Add vendor prefix for Enclustra - Add various compatible string additions - Various example fixes and cleanups - Remove unused hisilicon,hi6220-reset binding - Treewide fix properties missing type definition - Drop some empty and unreferenced .txt bindings - Documentation improvements for writing schemas DT driver core: - Drop static IRQ resources for DT platform devices as IRQ setup is dynamic and drivers have all been converted to use platform_get_irq() and friends - Rework memory allocations and frees for overlays - Continue overlay notifier callbacks on successful calls and add unittests - Handle 'interrupts-extended' in early DT IRQ setup - Fix of_property_read_string() errors to match documentation - Ignore disabled nodes in FDT API calls" * tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (86 commits) of/irq: fix typo in comment dt-bindings: Fix properties without any type Revert "dt-bindings: mailbox: qcom-ipcc: add missing properties into example" dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings dt-bindings: timer: samsung,exynos4210-mct: define strict clock order dt-bindings: timer: samsung,exynos4210-mct: drop unneeded minItems dt-bindings: timer: cdns,ttc: drop unneeded minItems dt-bindings: mailbox: zynqmp_ipi: convert to yaml dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers dt-bindings: net: add schema for ASIX USB Ethernet controllers of/fdt: Ignore disabled memory nodes dt-bindings: arm: fix typos in compatible dt-bindings: mfd: Add bindings child nodes for the Mediatek MT6360 dt-bindings: display: convert Arm Komeda to DT schema dt-bindings: display: convert Arm Mali-DP to DT schema dt-bindings: display: convert Arm HDLCD to DT schema dt-bindings: display: convert PL110/PL111 to DT schema dt-bindings: arm: convert vexpress-config to DT schema dt-bindings: arm: convert vexpress-sysregs to DT schema ...
2022-05-24Merge tag 'devprop-5.19-rc1' of ↵Linus Torvalds1-0/+34
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "These mostly extend the device property API and make it easier to use in some cases. Specifics: - Allow error pointer to be passed to fwnode APIs (Andy Shevchenko). - Introduce fwnode_for_each_parent_node() (Andy Shevchenko, Douglas Anderson). - Advertise fwnode and device property count API calls (Andy Shevchenko). - Clean up fwnode_is_ancestor_of() (Andy Shevchenko). - Convert device_{dma_supported,get_dma_attr} to fwnode (Sakari Ailus). - Release subnode properties with data nodes (Sakari Ailus). - Add ->iomap() and ->irq_get() to fwnode operations (Sakari Ailus)" * tag 'devprop-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: Advertise fwnode and device property count API calls device property: Fix recent breakage of fwnode_get_next_parent_dev() device property: Drop 'test' prefix in parameters of fwnode_is_ancestor_of() device property: Introduce fwnode_for_each_parent_node() device property: Allow error pointer to be passed to fwnode APIs ACPI: property: Release subnode properties with data nodes device property: Add irq_get to fwnode operation device property: Add iomap to fwnode operations ACPI: property: Move acpi_fwnode_device_get_match_data() up device property: Convert device_{dma_supported,get_dma_attr} to fwnode
2022-05-24Merge tag 'mtd/for-5.19' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd updates from Miquel Raynal: "MTD core changes: - Call of_platform_populate() for MTD partitions - Check devicetree alias for index - mtdoops: - Add a timestamp to the mtdoops header. - Create a header structure for the saved mtdoops. - Fix the size of the header read buffer. - mtdblock: Warn if opened on NAND - Bindings: - reserved-memory: Support MTD/block device - jedec,spi-nor: remove unneeded properties - Extend fixed-partitions binding - Add Sercomm (Suzhou) Corporation vendor prefix MTD driver changes: - st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove() - phram: - Allow cached mappings - Allow probing via reserved-memory - maps: ixp4xx: Drop driver - bcm47xxpart: Print correct offset on read error CFI driver changes: - Rename chip_ready variables - Add S29GL064N ID definition - Use chip_ready() for write on S29GL064N - Move and rename chip_check/chip_ready/chip_good_for_write NAND core changes: - Print offset instead of page number for bad blocks Raw NAND controller drivers: - Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe() - CS553X: simplify the return expression of cs553x_write_ctrl_byte() - Davinci: Remove redundant unsigned comparison to zero - Denali: Use managed device resources - GPMI: - Add large oob bch setting support - Rename the variable ecc_chunk_size - Uninline the gpmi_check_ecc function - Add strict ecc strength check - Refactor BCH geometry settings function - Intel: Fix possible null-ptr-deref in ebu_nand_probe() - MPC5121: Check before clk_disable_unprepare() not needed - Mtk: - MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK - Also parse the default nand-ecc-engine property if available - Make mtk_ecc.c a separated module - OMAP ELM: - Convert the bindings to yaml - Describe the bindings for AM64 ELM - Add support for its compatible - Renesas: Use runtime PM instead of the raw clock API and update the bindings accordingly - Rockchip: Check before clk_disable_unprepare() not needed - TMIO: Check return value after calling platform_get_resource() Raw NAND chip driver: - Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00 SPI-NAND chip drivers: - Gigadevice: - Add support for: - GD5FxGM7xExxG - GD5F{2,4}GQ5xExxG - GD5F1GQ5RExxG - GD5FxGQ4xExxG - Fix Quad IO for GD5F1GQ5UExxG - XTX: Add support for XT26G0xA SPI NOR core changes: - Read back written SR value to make sure the write was done correctly. - Introduce a common function for Read ID that manufacturer drivers can use to verify the Octal DTR switch worked correctly. - Add helpers for read/write any register commands so manufacturer drivers don't open code it every time. - Clarify rdsr dummy cycles documentation. - Add debugfs entry to expose internal flash parameters and state. SPI NOR manufacturer drivers changes: - Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A. - Move spi_nor_write_ear() to Winbond module since only Winbond flashes use it. - Rework Micron and Cypress Octal DTR enable methods to improve readability. - Use the common Read ID function to verify switch to Octal DTR mode for Micron and Cypress flashes. - Skip polling status on volatile register writes for Micron and Cypress flashes since the operation is instant" * tag 'mtd/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (68 commits) mtd: st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove() dt-bindings: mtd: partitions: Extend fixed-partitions binding dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix mtd: phram: Allow cached mappings mtd: call of_platform_populate() for MTD partitions mtd: rawnand: renesas: Use runtime PM instead of the raw clock API dt-bindings: mtd: renesas: Fix the NAND controller description mtd: rawnand: mpc5121: Check before clk_disable_unprepare() not needed mtd: rawnand: rockchip: Check before clk_disable_unprepare() not needed mtd: nand: MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK mtd: rawnand: cs553x: simplify the return expression of cs553x_write_ctrl_byte() mtd: rawnand: kioxia: Add support for TH58NVG3S0HBAI4 mtd: spi-nor: debugfs: fix format specifier mtd: spi-nor: support eon en25qh256a variant mtd: spi-nor: winbond: add support for W25Q512NW-IM mtd: spi-nor: expose internal parameters via debugfs mtd: spi-nor: export spi_nor_hwcaps_pp2cmd() mtd: spi-nor: move spi_nor_write_ear() to winbond module mtd: spi-nor: amend the rdsr dummy cycles documentation mtd: cfi_cmdset_0002: Rename chip_ready variables ...
2022-05-23of/irq: fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220521111145.81697-59-Julia.Lawall@inria.fr
2022-05-17of/fdt: Ignore disabled memory nodesAndre Przywara1-0/+3
When we boot a machine using a devicetree, the generic DT code goes through all nodes with a 'device_type = "memory"' property, and collects all memory banks mentioned there. However it does not check for the status property, so any nodes which are explicitly "disabled" will still be added as a memblock. This ends up badly for QEMU, when booting with secure firmware on arm/arm64 machines, because QEMU adds a node describing secure-only memory: =================== secram@e000000 { secure-status = "okay"; status = "disabled"; reg = <0x00 0xe000000 0x00 0x1000000>; device_type = "memory"; }; =================== The kernel will eventually use that memory block (which is located below the main DRAM bank), but accesses to that will be answered with an SError: =================== [ 0.000000] Internal error: synchronous external abort: 96000050 [#1] PREEMPT SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc6-00014-g10c8acb8b679 #524 [ 0.000000] Hardware name: linux,dummy-virt (DT) [ 0.000000] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.000000] pc : new_slab+0x190/0x340 [ 0.000000] lr : new_slab+0x184/0x340 [ 0.000000] sp : ffff80000a4b3d10 .... ================== The actual crash location and call stack will be somewhat random, and depend on the specific allocation of that physical memory range. As the DT spec[1] explicitly mentions standard properties, add a simple check to skip over disabled memory nodes, so that we only use memory that is meant for non-secure code to use. That fixes booting a QEMU arm64 VM with EL3 enabled ("secure=on"), when not using UEFI. In this case the QEMU generated DT will be handed on to the kernel, which will see the secram node. This issue is reproducible when using TF-A together with U-Boot as firmware, then booting with the "booti" command. When using U-Boot as an UEFI provider, the code there [2] explicitly filters for disabled nodes when generating the UEFI memory map, so we are safe. EDK/2 only reads the first bank of the first DT memory node [3] to learn about memory, so we got lucky there. [1] https://github.com/devicetree-org/devicetree-specification/blob/main/source/chapter3-devicenodes.rst#memory-node (after the table) [2] https://source.denx.de/u-boot/u-boot/-/blob/master/lib/fdtdec.c#L1061-1063 [3] https://github.com/tianocore/edk2/blob/master/ArmVirtPkg/PrePi/FdtParser.c Reported-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220517101410.3493781-1-andre.przywara@arm.com
2022-05-07of: Support more than one crash kernel regions for kexec -sZhen Lei1-0/+9
When "crashkernel=X,high" is used, there may be two crash regions: high=crashk_res and low=crashk_low_res. But now the syscall kexec_file_load() only add crashk_res into "linux,usable-memory-range", this may cause the second kernel to have no available dma memory. Fix it like kexec-tools does for option -c, add both 'high' and 'low' regions into the dtb. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Baoquan He <bhe@redhat.com> Link: https://lore.kernel.org/r/20220506114402.365-6-thunder.leizhen@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-07of: fdt: Add memory for devices by DT property "linux,usable-memory-range"Chen Zhou1-10/+23
When reserving crashkernel in high memory, some low memory is reserved for crash dump kernel devices and never mapped by the first kernel. This memory range is advertised to crash dump kernel via DT property under /chosen, linux,usable-memory-range = <BASE1 SIZE1 [BASE2 SIZE2]> We reused the DT property linux,usable-memory-range and made the low memory region as the second range "BASE2 SIZE2", which keeps compatibility with existing user-space and older kdump kernels. Crash dump kernel reads this property at boot time and call memblock_add() to add the low memory region after memblock_cap_memory_range() has been called. Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Co-developed-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com> Acked-by: Baoquan He <bhe@redhat.com> Link: https://lore.kernel.org/r/20220506114402.365-5-thunder.leizhen@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-03of: overlay: do not free changeset when of_overlay_apply returns errorFrank Rowand2-5/+34
New unittests for overlay notifiers reveal a memory leak in of_overlay_apply() when a notifier returns an error for action OF_OVERLAY_POST_APPLY. The pr_err() message is: OF: ERROR: memory leak, expected refcount 1 instead of 3, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /testcase-data/overlay-node/test-bus/test-unittest17 Change the error path to no longer call free_overlay_changeset(), and document that the caller of of_overlay_fdt_apply() may choose to remove the overlay. Update the unittest that triggered the error to expect the changed return values and to call of_overlay_remove(). Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220502181742.1402826-4-frowand.list@gmail.com
2022-05-03of: overlay: unittest: add tests for overlay notifiersFrank Rowand7-0/+280
Add tests for overlay apply and remove notifiers. Trigger errors for each of the notifier actions. These tests will reveal a memory leak problem when a notifier returns an error for action OF_OVERLAY_POST_APPLY. The pr_err() message is: OF: ERROR: memory leak, expected refcount 1 instead of 3, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /testcase-data/overlay-node/test-bus/test-unittest17 Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220502181742.1402826-3-frowand.list@gmail.com
2022-05-03of: overlay: add entry to of_overlay_action_name[]Frank Rowand1-22/+5
The values of enum of_overlay_notify_action are used to index into array of_overlay_action_name. Add an entry to of_overlay_action_name for the value recently added to of_overlay_notify_action. Array of_overlay_action_name[] is moved into include/linux/of.h adjacent to enum of_overlay_notify_action to make the connection between the two more obvious if either is modified in the future. The only use of of_overlay_action_name is for error reporting in overlay_notify(). All callers of overlay_notify() report the same error, but with fewer details. Remove the redundant error reports in the callers. Fixes: 067c098766c6 ("of: overlay: rework overlay apply and remove kfree()s") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220502181742.1402826-2-frowand.list@gmail.com
2022-04-25of: overlay: rework overlay apply and remove kfree()sFrank Rowand1-138/+125
Fix various kfree() issues related to of_overlay_apply(). - Double kfree() of fdt and tree when init_overlay_changeset() returns an error. - free_overlay_changeset() free the root of the unflattened overlay (variable tree) instead of the memory that contains the unflattened overlay. - For the case of a failure during applying an overlay, move kfree() of new_fdt and overlay_mem into free_overlay_changeset(), which is called by the function that allocated them. - For the case of removing an overlay, the kfree() of new_fdt and overlay_mem remains in free_overlay_changeset(). - Check return value of of_fdt_unflatten_tree() for error instead of checking the returned value of overlay_root. - When storing pointers to allocated objects in ovcs, do so as near to the allocation as possible instead of in deeply layered function. More clearly document policy related to lifetime of pointers into overlay memory. Double kfree() Reported-by: Slawomir Stepien <slawomir.stepien@nokia.com> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220420222505.928492-3-frowand.list@gmail.com
2022-04-25of: overlay: rename variables to be consistentFrank Rowand1-47/+47
Variables change name across function calls when there is not a good reason to do so. Fix by changing "fdt" to "new_fdt" and "tree" to "overlay_root". The name disparity was confusing when creating the following commit. The name changes are in this separate commit to make review of the following commmit less complex. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220420222505.928492-2-frowand.list@gmail.com
2022-04-25of: overlay: do not break notify on NOTIFY_{OK|STOP}Nuno Sá1-3/+1
We should not break overlay notifications on NOTIFY_{OK|STOP} otherwise we might break on the first fragment. We should only stop notifications if a *real* errno is returned by one of the listeners. Fixes: a1d19bd4cf1fe ("of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220420130205.89435-1-nuno.sa@analog.com
2022-04-25mtd: phram: Allow probing via reserved-memoryVincent Whitchurch1-0/+1
Allow phram to be probed from the devicetree. It expects to be in a reserved-memory node as documented by the bindings. This allows things like partitioning to be specified via the devicetree. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220412135302.1682890-4-vincent.whitchurch@axis.com
2022-04-20of: Create platform devices for OF framebuffersThomas Zimmermann1-19/+64
Create a platform device for each OF-declared framebuffer and have offb bind to these devices. Allows for real hot-unplugging and other drivers besides offb. Originally, offb created framebuffer devices while initializing its module by parsing the OF device tree. No actual Linux device was set up. This tied OF framebuffers to offb and makes writing other drivers for the OF framebuffers complicated. The absence of a Linux device further prevented real hot-unplugging. Adding a distinct platform device for each OF framebuffer solves both problems. Specifically, a DRM driver can now provide graphics output for modern userspace. Some of the offb init code is now located in the OF initialization. There's now also an implementation of of_platform_default_populate_init(), which was missing before. The OF side creates different devices for either OF display nodes or BootX displays as they require different handling by the driver. The offb drivers picks up each type of device and runs the appropriate fbdev initialization. Tested with OF display nodes on qemu's ppc64le target. v3: * declare variable 'node' with function scope (Rob) v2: * run PPC code as part of existing initialization (Rob) * add a few more error warnings (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-2-tzimmermann@suse.de
2022-04-19of: of_property_read_string return -ENODATA when !lengthStefano Stabellini1-1/+4
When the length of the string is zero of_property_read_string should return -ENODATA according to the description of the function. However, of_property_read_string doesn't check prop->length. If prop->length is zero, return -ENODATA. Without this patch the following command in u-boot: fdt set /chosen/node property-name results in of_property_read_string returning -EILSEQ when attempting to read property-name. With this patch, it returns -ENODATA as expected. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220416003028.1315268-1-sstabellini@kernel.org
2022-04-12of/irq: Use interrupts-extended to find parentSamuel Holland1-2/+11
The RISC-V PLIC binding uses interrupts-extended to specify its parent domain(s). That binding does not allow the interrupt-parent property to appear in the irqchip node. This prevents of_irq_init from properly detecting the irqchip hierarchy. If no interrupt-parent property is present in the enclosing bus or root node, then desc->interrupt_parent will be NULL for both the per-CPU RISC-V INTC (the actual root domain) and the RISC-V PLIC. Similarly, if the bus or root node specifies `interrupt-parent = <&plic>`, then of_irq_init will hit the `desc->interrupt_parent == np` check, and again all parents will be NULL. So things happen to work today for some boards due to Makefile ordering. However, things break when another irqchip ("foo") is stacked on top of the PLIC. The bus or root node will have `interrupt-parent = <&foo>`, since that is what all of the other peripherals need. When of_irq_init runs, it will try to find the PLIC's parent domain. of_irq_find_parent will fall back to using the interrupt-parent property of the PLIC's parent node (i.e. the bus or root node), and of_irq_init will see "foo" as the PLIC's parent domain. But this is wrong, because "foo" is actually the PLIC's child domain! So of_irq_init wrongly attempts to init the stacked irqchip before the PLIC. This fails and breaks booting. Fix this by using the first node referenced by interrupts-extended as the parent when that property is present. This allows of_irq_init to see the relationship between the PLIC and the per-CPU RISC-V INTC, and thus only the RISC-V INTC is (correctly) considered a root domain. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220412051529.6293-1-samuel@sholland.org
2022-04-05device property: Add irq_get to fwnode operationSakari Ailus1-0/+7
Add irq_get() fwnode operation to implement fwnode_irq_get() through fwnode operations, moving the code in fwnode_irq_get() to OF and ACPI frameworks. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-05device property: Add iomap to fwnode operationsSakari Ailus1-0/+10
Add iomap() fwnode operation to implement fwnode_iomap() through fwnode operations, moving the code in fwnode_iomap() to OF framework. Note that the IS_ENABLED(CONFIG_OF_ADDRESS) && is_of_node(fwnode) check is needed for Sparc that has its own implementation of of_iomap anyway. Let the pre-compiler to handle that check. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-05device property: Convert device_{dma_supported,get_dma_attr} to fwnodeSakari Ailus1-0/+17
Make the device_dma_supported and device_get_dma_attr functions to use the fwnode ops, and move the implementation to ACPI and OF frameworks. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-04of/platform: Drop static setup of IRQ resource from DT coreLad Prabhakar1-9/+5
Now that all the DT drivers have switched to platform_get_irq() we can now safely drop the static setup of IRQ resource from DT core code. With the above change hierarchical setup of irq domains is no longer bypassed and thus allowing hierarchical interrupt domains to describe interrupts using "interrupts" DT property. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Marc Zyngier <maz@kernel.org> Tested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220316200633.28974-1-prabhakar.mahadev-lad.rj@bp.renesas.com
2022-03-28Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
2022-03-26Merge tag 'devicetree-for-5.18' of ↵Linus Torvalds2-55/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add Krzysztof Kozlowski as co-maintainer for DT bindings providing much needed help. - DT schema validation now takes DTB files as input rather than intermediate YAML files. This decouples the validation from the source level syntax information. There's a bunch of schema fixes as a result of switching to DTB based validation which exposed some errors and incomplete schemas and examples. - Kbuild improvements to explicitly warn users running 'make dt_binding_check' on missing yamllint - Expand DT_SCHEMA_FILES kbuild variable to take just a partial filename or path instead of the full path to 1 file. - Convert various bindings to schema format: mscc,vsc7514-switch, multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma, msm/mdp4, rda,8810pl-uart - New schemas for u-boot environment variable partition, TI clksel - New compatible strings for Renesas RZ/V2L SoC - Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated HiSilicon - Add/fix schemas for QEMU Arm 'virt' machine - Drop unused of_alias_get_alias_list() function - Add a script to check DT unittest EXPECT message output. Pass messages also now print by default at PR_INFO level to help test automation. * tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits) dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable dt-bindings: nvmem: add U-Boot environment variables binding dt-bindings: ufs: qcom: Add SM6350 compatible string dt-bindings: dmaengine: sifive,fu540-c000: include generic schema dt-bindings: gpio: pca95xx: drop useless consumer example Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs" dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent' dt-bindings: gnss: Add two more chips dt-bindings: gnss: Rewrite sirfstar binding in YAML dt-bindings: gnss: Modify u-blox to use common bindings dt-bindings: gnss: Rewrite common bindings in YAML dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible dt-bindings: ata: ahci-platform: Add power-domains property dt-bindings: ata: ahci-platform: Convert DT bindings to yaml dt-bindings: kbuild: Use DTB files for validation dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate dt-bindings: Add QEMU virt machine compatible dt-bindings: arm: Convert QEMU fw-cfg to DT schema dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list dt-bindings: i2c: convert i2c-at91 to json-schema ...
2022-03-22cma: factor out minimum alignment requirementDavid Hildenbrand1-6/+3
Patch series "mm: enforce pageblock_order < MAX_ORDER". Having pageblock_order >= MAX_ORDER seems to be able to happen in corner cases and some parts of the kernel are not prepared for it. For example, Aneesh has shown [1] that such kernels can be compiled on ppc64 with 64k base pages by setting FORCE_MAX_ZONEORDER=8, which will run into a WARN_ON_ONCE(order >= MAX_ORDER) in comapction code right during boot. We can get pageblock_order >= MAX_ORDER when the default hugetlb size is bigger than the maximum allocation granularity of the buddy, in which case we are no longer talking about huge pages but instead gigantic pages. Having pageblock_order >= MAX_ORDER can only make alloc_contig_range() of such gigantic pages more likely to succeed. Reliable use of gigantic pages either requires boot time allcoation or CMA, no need to overcomplicate some places in the kernel to optimize for corner cases that are broken in other areas of the kernel. This patch (of 2): Let's enforce pageblock_order < MAX_ORDER and simplify. Especially patch #1 can be regarded a cleanup before: [PATCH v5 0/6] Use pageblock_order for cma and alloc_contig_range alignment. [2] [1] https://lkml.kernel.org/r/87r189a2ks.fsf@linux.ibm.com [2] https://lkml.kernel.org/r/20220211164135.1803616-1-zi.yan@sent.com Link: https://lkml.kernel.org/r/20220214174132.219303-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: John Garry via iommu <iommu@lists.linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-21Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs"Rob Herring1-54/+0
This reverts commit b1078c355d76769b5ddefc67d143fbd9b6e52c05. The single user of of_alias_get_alias_list(), drivers/tty/serial/xilinx_uartps.c, has since been refactored and no longer needs this function. It also contained a Smatch checker warning: drivers/of/base.c:2038 of_alias_get_alias_list() warn: passing negative bit value 's32min-(-2),0-s32max' to 'set_bit()' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rob Herring <robh@kernel.org>
2022-03-08Merge branch 'dt/linus' into dt/nextRob Herring2-9/+9
Pull in DT binding warning fixes
2022-02-28Merge 5.17-rc6 into char-misc-nextGreg Kroah-Hartman2-9/+9
We need the char-misc fixes in here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17of/fdt: move elfcorehdr reservation early for crash dump kernelNikhil Gupta1-1/+1
elfcorehdr_addr is fixed address passed to Second kernel which may be conflicted with potential reserved memory in Second kernel,so fdt_reserve_elfcorehdr() ahead of fdt_init_reserved_mem() can relieve this situation. Signed-off-by: Nikhil Gupta <nikhil.gupta@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220128042321.15228-1-nikhil.gupta@nxp.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 08:24:57 +0000