summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2008-06-30hostap: fix sparse warningsPavel Roskin5-16/+15
Rewrite AID calculation in handle_pspoll() to avoid truncating bits. Make hostap_80211_header_parse() static, don't export it. Avoid shadowing variables. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-30hostap: don't report useless WDS frames by defaultPavel Roskin1-1/+1
DEBUG_EXTRA is reported to the kernel log by default, but DEBUG_EXTRA2 is not. Unrelated WDS frames pollute the log unnecessarily. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27hamradio: remove unused variableAndre Haupt1-2/+0
Signed-off-by: Andre Haupt <andre@bitwigglers.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-27prism: islpci_eth.c endianness fixHarvey Harrison1-1/+1
clock is already cpu-endian (see le32_to_cpu slightly before), so le64_to_cpu doesn't make much sense. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27rt2x00: Fix lock dependency errrorIvo van Doorn3-15/+28
This fixes a circular locking dependency in the workqueue handling. The interface work task uses the mac80211 function ieee80211_iterate_active_interfaces() which grabs the RTNL lock. However when the interface is brough down, this happens under the RTNL lock as well, this causes problems because mac80211 will flush the workqueue during the ifdown event. This causes mac80211 to wait until the driver has completed all work which can't finish because it is waiting on the RTNL lock. This is fixed by moving rt2x00 workqueue tasks on a different workqueue, this workqueue can be flushed when the ieee80211_hw structure is removed by the driver (when the driver is unloaded) which does not happen under the RTNL lock. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27Merge branch 'master' of ↵David S. Miller8-70/+97
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-06-27Hold RTNL while calling dev_close()Ben Hutchings1-0/+3
dev_close() must be called holding the RTNL. Compile-tested only. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27qla3xxx: Hold RTNL while calling dev_close()Ben Hutchings1-0/+2
dev_close() must be called holding the RTNL. Compile-tested only. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27[netdrvr] Fix IOMMU overflow checking in s2io.cAndi Kleen2-27/+12
s2io has IOMMU overflow checking, but unfortunately it is wrong. It didn't use the standard macros, which meant that it only worked on POWER and SPARC because only those define DMA_ERROR_CODE. Convert it to use the standard macros instead. I also commented two more bugs in the IOMMU handling. It assumes that 0 DMA addresses cannot happen, but that's not true in all IOMMU setups. The information if a buffer has been already mapped needs to be stored elsewhere. Didn't fix those because it needs careful checking of the buffer handling by the maintainers. Cc: ram.vepa@neterion.com Cc: santosh.rastapur@neterion.com Cc: sivakumar.subramani@neterion.com Cc: sreenivasa.honnur@neterion.com Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27e1000: only enable TSO6 via ethtool when using correct hardwareAndy Gospodarek1-1/+1
When enabling TSO via ethool on e1000, it is possible to set NETIF_F_TSO6 on hardware that does not support it. Setting TSO via ethtool now matches the settings used when the hardware is probed. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27e100: Do pci_dma_sync after skb_alloc for proper operation on ixp4xxKevin Hao1-0/+2
The E100 device can't work on current kernel (2.6.26-rc6) and will cause kernel corruption on intel ixdp4xx. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27[netdrvr] netxen: fix netxen_pci_tbl[] breakageAl Viro1-7/+11
PCI_DEVICE_CLASS sets .device and .vendor to PCI_ANY_DEV, which overrides the effect of preceding PCI_DEVICE() and makes all elements of netxen_pci_tbl[] identical. Introduced in the commit dcd56fdbaeae1008044687b973c4a3e852e8a726. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27[netdrvr] 3c59x: remove irqs_disabled warning from local_bh_enableIngo Molnar1-2/+3
Original Author: Michael Buesch <mb@bu3sch.de> net, vortex: fix lockup Ingo Molnar reported: -tip testing found that Johannes Berg's "softirq: remove irqs_disabled warning from local_bh_enable" enhancement to lockdep triggers a new warning on an old testbox that uses 3c59x vortex and netlogging: -----> calling vortex_init+0x0/0xb0 PCI: Found IRQ 10 for device 0000:00:0b.0 PCI: Sharing IRQ 10 with 0000:00:0a.0 PCI: Sharing IRQ 10 with 0000:00:0b.1 3c59x: Donald Becker and others. 0000:00:0b.0: 3Com PCI 3c556 Laptop Tornado at e0800400. PCI: Enabling bus mastering for device 0000:00:0b.0 initcall vortex_init+0x0/0xb0 returned 0 after 47 msecs ... calling init_netconsole+0x0/0x1b0 netconsole: local port 4444 netconsole: local IP 10.0.1.9 netconsole: interface eth0 netconsole: remote port 4444 netconsole: remote IP 10.0.1.16 netconsole: remote ethernet address 00:19:xx:xx:xx:xx netconsole: device eth0 not up yet, forcing it eth0: setting half-duplex. eth0: setting full-duplex. ------------[ cut here ]------------ WARNING: at kernel/softirq.c:137 local_bh_enable_ip+0xd1/0xe0() Pid: 1, comm: swapper Not tainted 2.6.26-rc6-tip #2091 [<c0125ecf>] warn_on_slowpath+0x4f/0x70 [<c0126834>] ? release_console_sem+0x1b4/0x1d0 [<c0126d00>] ? vprintk+0x2a0/0x450 [<c012fde5>] ? __mod_timer+0xa5/0xc0 [<c046f7fd>] ? mdio_sync+0x3d/0x50 [<c0160ef6>] ? marker_probe_cb+0x46/0xa0 [<c0126ed7>] ? printk+0x27/0x50 [<c046f4c3>] ? vortex_set_duplex+0x43/0xc0 [<c046f521>] ? vortex_set_duplex+0xa1/0xc0 [<c0471b92>] ? vortex_timer+0xe2/0x3e0 [<c012b361>] local_bh_enable_ip+0xd1/0xe0 [<c08d9f9f>] _spin_unlock_bh+0x2f/0x40 [<c0471b92>] vortex_timer+0xe2/0x3e0 [<c014743b>] ? trace_hardirqs_on+0xb/0x10 [<c0147358>] ? trace_hardirqs_on_caller+0x88/0x160 [<c012f8b2>] run_timer_softirq+0x162/0x1c0 [<c0471ab0>] ? vortex_timer+0x0/0x3e0 [<c012b361>] local_bh_enable_ip+0xd1/0xe0 [<c08d9f9f>] _spin_unlock_bh+0x2f/0x40 [<c0471b92>] vortex_timer+0xe2/0x3e0 [<c014743b>] ? trace_hardirqs_on+0xb/0x10 [<c0147358>] ? trace_hardirqs_on_caller+0x88/0x160 [<c012f8b2>] run_timer_softirq+0x162/0x1c0 [<c0471ab0>] ? vortex_timer+0x0/0x3e0 [<c0471ab0>] ? vortex_timer+0x0/0x3e0 [<c012b60a>] __do_softirq+0x9a/0x160 [<c012b570>] ? __do_softirq+0x0/0x160 [<c0106775>] call_on_stack+0x15/0x30 [<c012b4f5>] ? irq_exit+0x55/0x60 [<c0106e85>] ? do_IRQ+0x85/0xd0 [<c0147391>] ? trace_hardirqs_on_caller+0xc1/0x160 [<c0104888>] ? common_interrupt+0x28/0x30 [<c08d8ac8>] ? mutex_unlock+0x8/0x10 [<c08d8180>] ? _cond_resched+0x10/0x30 [<c07a3be7>] ? netpoll_setup+0x117/0x390 [<c0cbfcfe>] ? init_netconsole+0x14e/0x1b0 [<c013d539>] ? ktime_get+0x19/0x40 [<c0c9bab2>] ? kernel_init+0x1b2/0x2c0 [<c0cbfbb0>] ? init_netconsole+0x0/0x1b0 [<c0396aa4>] ? trace_hardirqs_on_thunk+0xc/0x10 [<c0103f12>] ? restore_nocheck_notrace+0x0/0xe [<c0c9b900>] ? kernel_init+0x0/0x2c0 [<c0c9b900>] ? kernel_init+0x0/0x2c0 [<c0104aa7>] ? kernel_thread_helper+0x7/0x10 ======================= ---[ end trace 37f9c502aff112e0 ]--- console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x1b0 returned 0 after 2914 msecs looking at the driver I think the bug is real and the fix actually is trivial. vp->lock is also taken in hardware IRQ context, so we _have_ to always use irqsafe locking. As we run in a timer with IRQs disabled, we can simply use spin_lock. Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27ipg: use NULL, not zero, for pointersPekka Enberg1-1/+1
Fixes a sparse warning in a code block that's hidden under JUMBO_FRAME #ifdef. Tested-by: Andrew Savchenko <Bircoph@list.ru> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27ipg: fix jumbo frame compilationPekka Enberg1-7/+7
Make jumbo frame support compile again. It was broken by the cleanup series before the merge because the code is hidden under JUMBO_FRAME #ifdef. Tested-by: Andrew Savchenko <Bircoph@list.ru> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27drivers/net/r6040.c: Eliminate double sizeofJulia Lawall1-1/+1
Taking sizeof the result of sizeof is quite strange and does not seem to be what is wanted here. This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; @@ - sizeof ( sizeof (E) - ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27pcnet_cs, axnet_cs: clear bogus interrupt before request_irqKomuro2-0/+5
Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27e1000e: fix EEH recovery during reset on PPCJeff Kirsher1-1/+2
EEH is not recovering in a reasonable amount of time on PPC during e1000e_down(). Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27igb: fix EEH recovery during reset on PPCJeff Kirsher1-1/+2
EEH is not recovering in a reasonable amount of time on PPC during igb_down(). Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27ixgbe: fix EEH recovery during reset on PPCPaul Larson1-1/+2
EEh is not recovering in a resonable amount of time on PPC during ixgbe_down(). Signed-off-by: Paul Larson <pl@us.ibm.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27tc35815: Fix receiver hangup on Rx FIFO overflowAtsushi Nemoto1-1/+1
On Rx FIFO overflow error, the controller consume a buffer descriptor but currently the driver does not give it back to the controller. This results unrecoverable 'Buffer List Exhausted' condition. This patch fix this problem by moving a "fbl_count--" line to proper place. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-27tc35815: Mark carrier-off before starting PHYAtsushi Nemoto1-0/+2
Call netif_carrier_off() before starting PHY device. This is a behavior before converting to generic PHY layer. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-25iwlwifi: improve scanning band selection managementRon Rindjunsky2-33/+39
This patch modifies the band selection management when scanning, so bands are now scanned according to HW band support. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-25rt2x00: Fix unbalanced mutex lockingIvo van Doorn2-30/+42
The usb_cache_mutex was not correctly released under all circumstances. Both rt73usb as rt2500usb didn't release the mutex under certain conditions when the register access failed. Obviously such failure would lead to deadlocks. In addition under similar circumstances when the bbp register couldn't be read the value must be set to 0xff to indicate that the value is wrong. This too didn't happen under all circumstances. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-25b43legacy: Fix possible NULL pointer dereference in DMA codeMichael Buesch1-1/+1
This fixes a possible NULL pointer dereference in an error path of the DMA allocation error checking code. This is also necessary for a future DMA API change that is on its way into the mainline kernel that adds an additional dev parameter to dma_mapping_error(). Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-25b43: Fix possible MMIO access while device is downMichael Buesch1-0/+3
This fixes a possible MMIO access while the device is still down from a suspend cycle. MMIO accesses with the device powered down may cause crashes on certain devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-25b43legacy: Do not return TX_BUSY from op_txMichael Buesch1-2/+4
Never return TX_BUSY from op_tx. It doesn't make sense to return TX_BUSY, if we can not transmit the packet. Drop the packet and return TX_OK. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-25b43: Do not return TX_BUSY from op_txMichael Buesch1-4/+8
Never return TX_BUSY from op_tx. It doesn't make sense to return TX_BUSY, if we can not transmit the packet. Drop the packet and return TX_OK. This will fix the resume hang. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-20pppoe: warning fixStephen Hemminger1-1/+1
Fix warning: drivers/net/pppoe.c: In function 'pppoe_recvmsg': drivers/net/pppoe.c:945: warning: comparison of distinct pointer types lacks a cast because skb->len is unsigned int and total_len is size_t Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17Merge branch 'davem-fixes' of ↵David S. Miller11-242/+189
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-06-17tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is setAng Way Chuang1-0/+15
By default, tun.c running in TUN_TUN_DEV mode will set the protocol of packet to IPv4 if TUN_NO_PI is set. My program failed to work when I assumed that the driver will check the first nibble of packet, determine IP version and set the appropriate protocol. Signed-off-by: Ang Way Chuang <wcang@nav6.org> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17atl1: relax eeprom mac address error checkRadu Cristescu1-1/+0
The atl1 driver tries to determine the MAC address thusly: - If an EEPROM exists, read the MAC address from EEPROM and validate it. - If an EEPROM doesn't exist, try to read a MAC address from SPI flash. - If that fails, try to read a MAC address directly from the MAC Station Address register. - If that fails, assign a random MAC address provided by the kernel. We now have a report of a system fitted with an EEPROM containing all zeros where we expect the MAC address to be, and we currently handle this as an error condition. Turns out, on this system the BIOS writes a valid MAC address to the NIC's MAC Station Address register, but we never try to read it because we return an error when we find the all- zeros address in EEPROM. This patch relaxes the error check and continues looking for a MAC address even if it finds an illegal one in EEPROM. Signed-off-by: Radu Cristescu <advantis@gmx.net> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17net/enc28j60: low power modeDavid Brownell1-24/+58
Keep enc28j60 chips in low-power mode when they're not in use. At typically 120 mA, these chips run hot even when idle; this low power mode cuts that power usage by a factor of around 100. This version provides a generic routine to poll a register until its masked value equals some value ... e.g. bit set or cleared. It's basically what the previous wait_phy_ready() did, but this version is generalized to support the handshaking needed to enter and exit low power mode. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17net/enc28j60: section fixDavid Brownell1-3/+2
Minor bugfixes to the enc28j60 driver ... wrong section marking, indentation, and bogus use of spi_bus_type. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17sky2: 88E8040T pci device idStephen Hemminger1-0/+1
Missed one pci id for 88E8040T. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: download firmware in pci probeDhananjay Phadke2-59/+30
Downloading firmware in pci probe allows recovery in case of firmware failure by reloading the driver. Also reduced delays in firmware load. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: cleanup debug messagesDhananjay Phadke4-132/+70
o Remove unnecessary debug prints and functions. o Explicitly specify pci class (0x020000) to avoid enabling management function. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: remove global physical_port arrayDhananjay Phadke6-24/+22
Store physical port number in netxen_adapter structure. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17netxen: fix portnum for hp mezz cardsDhananjay Phadke1-2/+8
This fixes a the issue where logical port number is set incorrectly for HP blade mezz cards. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17ibm_newemac: select CRC32 in KconfigJosh Boyer1-0/+1
The ibm_newemac driver requires ether_crc to be defined. Apparently it is possible to generate a .config without CONFIG_CRC32 set which causes the following link errors if IBM_NEW_EMAC is selected: LD .tmp_vmlinux1 drivers/built-in.o: In function `emac_hash_mc': core.c:(.text+0x2f524): undefined reference to `crc32_le' core.c:(.text+0x2f528): undefined reference to `bitrev32' make: *** [.tmp_vmlinux1] Error 1 This patch has IBM_NEW_EMAC select CRC32 so we don't hit this error. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-14Merge branch 'master' of ↵David S. Miller7-51/+60
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-06-13rt2x00: Add D-link DWA111 supportIvo van Doorn1-0/+1
Add new rt73usb USB ID for D-Link DWA111 Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-13rt2x00: LEDS build failureRandy Dunlap1-6/+6
Config symbols that select LEDS_CLASS need to depend on NEW_LEDS so that undefined symbols are not used in the build. The alternative is to select NEW_LEDS, which some drivers do. This patch fixes the led_* symbols build errors. (.text+0x174cdc): undefined reference to `input_unregister_device' (.text+0x174d9f): undefined reference to `input_allocate_device' (.text+0x174e2d): undefined reference to `input_register_device' (.text+0x174e53): undefined reference to `input_free_device' rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' (.text+0x176eca): undefined reference to `input_unregister_polled_device' (.text+0x176efc): undefined reference to `input_free_polled_device' (.text+0x176f37): undefined reference to `input_free_polled_device' (.text+0x176fd8): undefined reference to `input_register_polled_device' (.text+0x1772c0): undefined reference to `led_classdev_resume' (.text+0x1772d4): undefined reference to `led_classdev_resume' (.text+0x1772e8): undefined reference to `led_classdev_resume' (.text+0x17730a): undefined reference to `led_classdev_suspend' (.text+0x17731e): undefined reference to `led_classdev_suspend' (.text+0x17732f): undefined reference to `led_classdev_suspend' rt2x00leds.c:(.text+0x177348): undefined reference to `led_classdev_unregister' rt2x00leds.c:(.text+0x1773c0): undefined reference to `led_classdev_register' rfkill-input.c:(.text+0x209e4c): undefined reference to `input_close_device' rfkill-input.c:(.text+0x209e53): undefined reference to `input_unregister_handle' rfkill-input.c:(.text+0x209ea1): undefined reference to `input_register_handle' rfkill-input.c:(.text+0x209eae): undefined reference to `input_open_device' rfkill-input.c:(.text+0x209ebb): undefined reference to `input_unregister_handle' rfkill-input.c:(.init.text+0x17405): undefined reference to `input_register_handler' rfkill-input.c:(.exit.text+0x194f): undefined reference to `input_unregister_handler' make[1]: *** [vmlinux] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-13rt2x00: INPUT build failureRandy Dunlap1-3/+4
Config symbols that select RFKILL need to depend on INPUT so that undefined symbols are not used in the build. This patch fixes the input_* symbols build errors. (.text+0x174cdc): undefined reference to `input_unregister_device' (.text+0x174d9f): undefined reference to `input_allocate_device' (.text+0x174e2d): undefined reference to `input_register_device' (.text+0x174e53): undefined reference to `input_free_device' rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' (.text+0x176eca): undefined reference to `input_unregister_polled_device' (.text+0x176efc): undefined reference to `input_free_polled_device' (.text+0x176f37): undefined reference to `input_free_polled_device' (.text+0x176fd8): undefined reference to `input_register_polled_device' (.text+0x1772c0): undefined reference to `led_classdev_resume' (.text+0x1772d4): undefined reference to `led_classdev_resume' (.text+0x1772e8): undefined reference to `led_classdev_resume' (.text+0x17730a): undefined reference to `led_classdev_suspend' (.text+0x17731e): undefined reference to `led_classdev_suspend' (.text+0x17732f): undefined reference to `led_classdev_suspend' rt2x00leds.c:(.text+0x177348): undefined reference to `led_classdev_unregister' rt2x00leds.c:(.text+0x1773c0): undefined reference to `led_classdev_register' rfkill-input.c:(.text+0x209e4c): undefined reference to `input_close_device' rfkill-input.c:(.text+0x209e53): undefined reference to `input_unregister_handle' rfkill-input.c:(.text+0x209ea1): undefined reference to `input_register_handle' rfkill-input.c:(.text+0x209eae): undefined reference to `input_open_device' rfkill-input.c:(.text+0x209ebb): undefined reference to `input_unregister_handle' rfkill-input.c:(.init.text+0x17405): undefined reference to `input_register_handler' rfkill-input.c:(.exit.text+0x194f): undefined reference to `input_unregister_handler' make[1]: *** [vmlinux] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-13b43: Fix noise calculation WARN_ONMichael Buesch2-7/+10
This removes a WARN_ON that is responsible for the following koops: http://www.kerneloops.org/searchweek.php?search=b43_generate_noise_sample The comment in the patch describes why it's safe to simply remove the check. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-13b43: Fix possible NULL pointer dereference in DMA codeMichael Buesch1-33/+32
This fixes a possible NULL pointer dereference in an error path of the DMA allocation error checking code. This is also necessary for a future DMA API change that is on its way into the mainline kernel that adds an additional dev parameter to dma_mapping_error(). This patch moves the whole struct b43_dmaring struct initialization right before any DMA allocation operation. Reported-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-13rt2x00: Restrict DMA to 32-bit addresses.Gertjan van Wingerde1-2/+1
None of the rt2x00 PCI devices support 64-bit DMA addresses (they all only accept 32-bit buffer addresses). Hence it makes no sense to try to enable 64-bit DMA addresses. Only try to enable 32-bit DMA addresses. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-13rt2x00: Don't kill guardian_urb when it wasn't createdIvo van Doorn1-0/+6
This fixes a "BUG: unable to handle kernel paging request" bug in rt73usb which was caused by killing the guardian_urb while it had never been allocated for rt73usb. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds15-55/+32
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: tcp: Revert 'process defer accept as established' changes. ipv6: Fix duplicate initialization of rawv6_prot.destroy bnx2x: Updating the Maintainer net: Eliminate flush_scheduled_work() calls while RTNL is held. drivers/net/r6040.c: correct bad use of round_jiffies() fec_mpc52xx: MPC52xx_MESSAGES_DEFAULT: 2nd NETIF_MSG_IFDOWN => IFUP ipg: fix receivemode IPG_RM_RECEIVEMULTICAST{,HASH} in ipg_nic_set_multicast_list() netfilter: nf_conntrack: fix ctnetlink related crash in nf_nat_setup_info() netfilter: Make nflog quiet when no one listen in userspace. ipv6: Fail with appropriate error code when setting not-applicable sockopt. ipv6: Check IPV6_MULTICAST_LOOP option value. ipv6: Check the hop limit setting in ancillary data. ipv6 route: Fix route lifetime in netlink message. ipv6 mcast: Check address family of gf_group in getsockopt(MS_FILTER). dccp: Bug in initial acknowledgment number assignment dccp ccid-3: X truncated due to type conversion dccp ccid-3: TFRC reverse-lookup Bug-Fix dccp ccid-2: Bug-Fix - Ack Vectors need to be ignored on request sockets dccp: Fix sparse warnings dccp ccid-3: Bug-Fix - Zero RTT is possible
2008-06-12bnx2x: Updating the MaintainerEilon Greenstein3-4/+7
I would like to thank Eliezer Tamir for writing and maintaining the driver for the past two years. I will take over maintaining the bnx2x driver from now on. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 09:40:36 +0000