summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2010-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds14-115/+172
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) af_unix: limit recursion level pch_gbe driver: The wrong of initializer entry pch_gbe dreiver: chang author ucc_geth: fix ucc halt problem in half duplex mode inet: Fix __inet_inherit_port() to correctly increment bsockets and num_owners ehea: Add some info messages and fix an issue hso: fix disable_net NET: wan/x25_asy, move lapb_unregister to x25_asy_close_tty cxgb4vf: fix setting unicast/multicast addresses ... net, ppp: Report correct error code if unit allocation failed DECnet: don't leak uninitialized stack byte au1000_eth: fix invalid address accessing the MAC enable register dccp: fix error in updating the GAR tcp: restrict net.ipv4.tcp_adv_win_scale (#20312) netns: Don't leak others' openreq-s in proc Net: ceph: Makefile: Remove unnessary code vhost/net: fix rcu check usage econet: fix CVE-2010-3848 econet: fix CVE-2010-3850 econet: disallow NULL remote addr for sendmsg(), fixes CVE-2010-3849 ...
2010-11-29pch_gbe driver: The wrong of initializer entryToshiharu Okada1-4/+4
The wrong of initializer entry was modified. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Reported-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29pch_gbe dreiver: chang authorToshiharu Okada2-6/+6
This driver's AUTHOR was changed to "Toshiharu Okada" from "Masayuki Ohtake". I update the Kconfig, renamed "Topcliff" to "EG20T". Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28ucc_geth: fix ucc halt problem in half duplex modeYang Li1-1/+2
In commit 58933c64(ucc_geth: Fix the wrong the Rx/Tx FIFO size), the UCC_GETH_UTFTT_INIT is set to 512 based on the recommendation of the QE Reference Manual. But that will sometimes cause tx halt while working in half duplex mode. According to errata draft QE_GENERAL-A003(High Tx Virtual FIFO threshold size can cause UCC to halt), setting UTFTT less than [(UTFS x (M - 8)/M) - 128] will prevent this from happening (M is the minimum buffer size). The patch changes UTFTT back to 256. Signed-off-by: Li Yang <leoli@freescale.com> Cc: Jean-Denis Boyer <jdboyer@media5corp.com> Cc: Andreas Schmitz <Andreas.Schmitz@riedel.net> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28ehea: Add some info messages and fix an issueBreno Leitao1-4/+14
This patch adds some debug information about ehea not being able to allocate enough spaces. Also it correctly updates the amount of available skb. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28hso: fix disable_netFilip Aben1-4/+6
The HSO driver incorrectly creates a serial device instead of a net device when disable_net is set. It shouldn't create anything for the network interface. Signed-off-by: Filip Aben <f.aben@option.com> Reported-by: Piotr Isajew <pki@ex.com.pl> Reported-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28NET: wan/x25_asy, move lapb_unregister to x25_asy_close_ttyJiri Slaby1-5/+6
We register lapb when tty is created, but unregister it only when the device is UP. So move the lapb_unregister to x25_asy_close_tty after the device is down. The old behaviour causes ldisc switching to fail each second attempt, because we noted for us that the device is unused, so we use it the second time, but labp layer still have it registered, so it fails obviously. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Sergey Lapin <slapin@ossfans.org> Cc: Andrew Hendry <andrew.hendry@gmail.com> Tested-by: Sergey Lapin <slapin@ossfans.org> Tested-by: Mikhail Ulyanov <ulyanov.mikhail@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28cxgb4vf: fix setting unicast/multicast addresses ...Casey Leedom2-63/+104
We were truncating the number of unicast and multicast MAC addresses supported. Additionally, we were incorrectly computing the MAC Address hash (a "1 << N" where we needed a "1ULL << N"). Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28net, ppp: Report correct error code if unit allocation failedCyrill Gorcunov1-21/+22
Allocating unit from ird might return several error codes not only -EAGAIN, so it should not be changed and returned precisely. Same time unit release procedure should be invoked only if device is unregistering. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28au1000_eth: fix invalid address accessing the MAC enable registerWolfgang Grandegger1-5/+5
"aup->enable" holds already the address pointing to the MAC enable register. The bug was introduced by commit d0e7cb: "au1000-eth: remove volatiles, switch to I/O accessors". CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wolfgang Grandegger <wg@denx.de> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-25Merge branch 'drivers' of ↵Linus Torvalds4-0/+2429
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile * 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: pci root complex: support for tile architecture drivers/net/tile/: on-chip network drivers for the tile architecture MAINTAINERS: add drivers/char/hvc_tile.c as maintained by tile
2010-11-24drivers/net/tile/: on-chip network drivers for the tile architectureChris Metcalf4-0/+2429
This change adds the first network driver for the tile architecture, supporting the on-chip XGBE and GBE shims. The infrastructure is present for the TILE-Gx networking drivers (another three source files in the new directory) but for now the the actual tilegx sources are waiting on releasing hardware to initial customers. Note that arch/tile/include/hv/* are "upstream" headers from the Tilera hypervisor and will probably benefit less from LKML review. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-24Merge branch 'master' of ↵David S. Miller3-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-11-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds5-22/+164
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: of/phylib: Use device tree properties to initialize Marvell PHYs. phylib: Add support for Marvell 88E1149R devices. phylib: Use common page register definition for Marvell PHYs. qlge: Fix incorrect usage of module parameters and netdev msg level ipv6: fix missing in6_ifa_put in addrconf SuperH IrDA: correct Baud rate error correction atl1c: Fix hardware type check for enabling OTP CLK net: allow GFP_HIGHMEM in __vmalloc() bonding: change list contact to netdev@vger.kernel.org e1000: fix screaming IRQ
2010-11-23wireless: b43: fix error path in SDIOGuennadi Liakhovetski1-0/+1
Fix unbalanced call to sdio_release_host() on the error path. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-22carl9170: fix virtual interface setup crashChristian Lamparter1-1/+1
This patch fixes a faulty bound check which caused a crash when too many virtual interface were brought up. BUG: unable to handle kernel NULL pointer dereference at 00000004 IP: [<f8125f67>] carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] *pde = 00000000 Oops: 0002 [#1] PREEMPT Modules linked in: carl9170 [...] Pid: 4720, comm: wpa_supplicant Not tainted 2.6.37-rc2-wl+ EIP: 0060:[<f8125f67>] EFLAGS: 00210206 CPU: 0 EIP is at carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] EAX: 00000000 ... Process wpa_supplicant Stack: f4f88f34 fffffff4 .. Call Trace: [<f8f4e666>] ? ieee80211_do_open+0x406/0x5c0 [mac80211] [...] Code: <89> 42 04 ... EIP: [<f8125f67>] carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] CR2: 0000000000000004 Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-22ath9k: fix timeout on stopping rx dmaFelix Fietkau1-1/+1
It seems that using ath9k_hw_stoppcurecv to stop rx dma is not enough. When it's time to stop DMA, the PCU is still busy, so the rx enable bit never clears. Using ath9k_hw_abortpcurecv helps with getting rx stopped much faster, with this change, I cannot reproduce the rx stop related WARN_ON anymore. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-22of/phylib: Use device tree properties to initialize Marvell PHYs.David Daney1-0/+97
Some aspects of PHY initialization are board dependent, things like indicator LED connections and some clocking modes cannot be determined by probing. The dev_flags element of struct phy_device can be used to control these things if an appropriate value can be passed from the Ethernet driver. We run into problems however if the PHY connections are specified by the device tree. There is no way for the Ethernet driver to know what flags it should pass. If we are using the device tree, the struct phy_device will be populated with the device tree node corresponding to the PHY, and we can extract extra configuration information from there. The next question is what should the format of that information be? It is highly device specific, and the device tree representation should not be tied to any arbitrary kernel defined constants. A straight forward representation is just to specify the exact bits that should be set using the "marvell,reg-init" property: phy5: ethernet-phy@5 { reg = <5>; compatible = "marvell,88e1149r"; marvell,reg-init = /* led[0]:1000, led[1]:100, led[2]:10, led[3]:tx */ <3 0x10 0 0x5777>, /* Reg 3,16 <- 0x5777 */ /* mix %:0, led[0123]:drive low off hiZ */ <3 0x11 0 0x00aa>, /* Reg 3,17 <- 0x00aa */ /* default blink periods. */ <3 0x12 0 0x4105>, /* Reg 3,18 <- 0x4105 */ /* led[4]:rx, led[5]:dplx, led[45]:drive low off hiZ */ <3 0x13 0 0x0a60>; /* Reg 3,19 <- 0x0a60 */ }; phy6: ethernet-phy@6 { reg = <6>; compatible = "marvell,88e1118"; marvell,reg-init = /* Fix rx and tx clock transition timing */ <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */ /* Adjust LED drive. */ <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */ /* irq, blink-activity, blink-link */ <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */ }; The Marvell PHYs have a page select register at register 22 (0x16), we can specify any register by its page and register number. These are the first and second word. The third word contains a mask to be ANDed with the existing register value, and the fourth word is ORed with the result to yield the new register value. The new marvell_of_reg_init function leaves the page select register unchanged, so a call to it can be dropped into the .config_init functions without unduly affecting the state of the PHY. If CONFIG_OF_MDIO is not set, there is no of_node, or no "marvell,reg-init" property, the PHY initialization is unchanged. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Cyril Chemparathy <cyril@ti.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22phylib: Add support for Marvell 88E1149R devices.David Daney1-0/+40
The 88E1149R is 10/100/1000 quad-gigabit Ethernet PHY. The .config_aneg function can be shared with 88E1118, but it needs its own .config_init. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Cyril Chemparathy <cyril@ti.com> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22phylib: Use common page register definition for Marvell PHYs.David Daney1-13/+14
The definition of the Marvell PHY page register is not specific to 88E1121, so rename the macro to MII_MARVELL_PHY_PAGE, and use it throughout. Suggested-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Cyril Chemparathy <cyril@ti.com> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22qlge: Fix incorrect usage of module parameters and netdev msg levelSonny Rao1-3/+3
Driver appears to be mistaking the permission field with default value in the case of debug and qlge_irq_type. Driver is also passing debug as a bitmask into netif_msg_init() which wants a number of bits. Ron Mercer suggests we should change this to pass in -1 so the defaults get used instead, which makes the default much less verbose. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Sonny Rao <sonnyrao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21SuperH IrDA: correct Baud rate error correctionNicolas Kaiser1-1/+1
It looks to me as if the second value of rate_err_array is intended to be a decimal 625. However, with a leading 0 it becomes an octal constant, and as such evaluates to a decimal 405. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21atl1c: Fix hardware type check for enabling OTP CLKBen Hutchings1-1/+1
Commit 496c185c9495629ef1c65387cb2594578393cfe0 "atl1c: Add support for Atheros AR8152 and AR8152" added the condition: if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b) for enabling OTP CLK, and the condition: if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c) for disabling OTP CLK. Since the two previously defined hardware types are athr_l1c and athr_l2c, the latter condition appears to be the correct one. Change the former to match. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21e1000: fix screaming IRQAnupam Chanda1-4/+8
VMWare reports that the e1000 driver has a bug when bringing down the interface, such that interrupts are not disabled in the hardware but the driver stops reporting that it consumed the interrupt. The fix is to set the driver's "down" flag later in the routine, after all the timers and such have exited, preventing the interrupt handler from being called and exiting early without handling the interrupt. CC: Anupam Chanda <anupamc@vmware.com> CC: stable kernel <stable@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds16-28/+48
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits) net: fix kernel-doc for sk_filter_rcu_release be2net: Fix to avoid firmware update when interface is not open. netfilter: fix IP_VS dependencies net: irda: irttp: sync error paths of data- and udata-requests ipv6: Expose reachable and retrans timer values as msecs ipv6: Expose IFLA_PROTINFO timer values in msecs instead of jiffies 3c59x: fix build failure on !CONFIG_PCI ipg.c: remove id [SUNDANCE, 0x1021] net: caif: spi: fix potential NULL dereference ath9k_htc: Avoid setting QoS control for non-QoS frames net: zero kobject in rx_queue_release net: Fix duplicate volatile warning. MAINTAINERS: Add stmmac maintainer bonding: fix a race in IGMP handling cfg80211: fix can_beacon_sec_chan, reenable HT40 gianfar: fix signedness issue net: bnx2x: fix error value sign 8139cp: fix checksum broken r8169: fix checksum broken rds: Integer overflow in RDS cmsg handling ...
2010-11-19be2net: Fix to avoid firmware update when interface is not open.Sarveshwar Bandi1-0/+6
Since interrupts are enabled only when open is called on the interface, Attempting a firmware update operation when interface is down could lead to partial success or failure of operation. This fix fails the request if netif_running is false. Signed-off-by: Sarveshwar Bandi <Sarveshwar.Bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18Merge branch 'master' of ↵David S. Miller7-7/+23
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-11-183c59x: fix build failure on !CONFIG_PCINamhyung Kim1-2/+4
VORTEX_PCI() could return NULL so it needs to be casted before accessing any member of struct pci_dev. This fixes following build failure. Likewise VORTEX_EISA() was changed also. CC [M] drivers/net/3c59x.o drivers/net/3c59x.c: In function 'acpi_set_WOL': drivers/net/3c59x.c:3211:39: warning: dereferencing 'void *' pointer drivers/net/3c59x.c:3211:39: error: request for member 'current_state' in something not a structure or union make[3]: *** [drivers/net/3c59x.o] Error 1 make[2]: *** [drivers/net/3c59x.o] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18ipg.c: remove id [SUNDANCE, 0x1021]Ken Kawasaki1-4/+2
ipg.c: The id [SUNDANCE, 0x1021] (=[0x13f0, 0x1021]) is defined at dl2k.h and ipg.c. But this device works better with dl2k driver. This problem is similar with the commit [25cca5352712561fba97bd37c495593d641c1d39 ipg: Remove device claimed by dl2k from pci id table] at 11 Feb 2010. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18net: caif: spi: fix potential NULL dereferenceVasiliy Kulikov1-2/+2
alloc_netdev() is not checked here for NULL return value. dev is check instead. It might lead to NULL dereference of ndev. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-18ath9k_htc: Avoid setting QoS control for non-QoS framesRajkumar Manoharan1-1/+1
Setting tid information in the TX header is required only for QoS frames. Not handling this case causes severe data loss with some APs. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18bonding: fix a race in IGMP handlingEric Dumazet1-0/+2
RCU conversion in IGMP code done in net-next-2.6 raised a race in __bond_resend_igmp_join_requests(). It iterates in_dev->mc_list without appropriate protection (RTNL, or read_lock on in_dev->mc_list_lock). Another cpu might delete an entry while we use it and trigger a fault. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17gianfar: fix signedness issueNicolas Kaiser1-4/+3
irq_of_parse_and_map() has an unsigned return type. Testing for a negative error value doesn't work here. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17net: bnx2x: fix error value signVasiliy Kulikov1-1/+1
bnx2x_init_one() should return negative value on error. By mistake it returns ENODEV instead of -ENODEV. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-178139cp: fix checksum brokenShan Wei1-6/+4
I am not family with RealTek RTL-8139C+ series 10/100 PCI Ethernet driver. I try to guess the meaning of RxProtoIP and IPFail. RxProtoIP stands for received IPv4 packet that upper protocol is not tcp and udp. !(status & IPFail) is true means that driver correctly to check checksum in IPv4 header. If these are right, driver will set ip_summed with CHECKSUM_UNNECESSARY for other upper protocol, e.g. sctp, igmp protocol. This will cause protocol stack ignores checksum check for packets with invalid checksum. This patch is only compile-test. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17r8169: fix checksum brokenShan Wei1-2/+1
If r8196 received packets with invalid sctp/igmp(not tcp, udp) checksum, r8196 set skb->ip_summed wit CHECKSUM_UNNECESSARY. This cause that upper protocol don't check checksum field. I am not family with r8196 driver. I try to guess the meaning of RxProtoIP and IPFail. RxProtoIP stands for received IPv4 packet that upper protocol is not tcp and udp. !(opts1 & IPFail) is true means that driver correctly to check checksum in IPv4 header. If it's right, I think we should not set ip_summed wit CHECKSUM_UNNECESSARY for my sctp packets with invalid checksum. If it's not right, please tell me. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann1-1/+0
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16ath9k_hw: Set proper eeprom offset for AR9287 HTC devicesRajkumar Manoharan2-1/+5
AR9287 based PCI & USB devices are differed in eeprom start offset. So set proper the offset for HTC devices to read nvram correctly. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k_htc: Add new devices into AR7010Rajkumar Manoharan3-1/+9
Treat new PIDs (0xA704, 0x1200) as AR7010 devices. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k_htc: Update usb device ID listRajkumar Manoharan1-0/+5
Added new VID/PIDs into supported devices list Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k: Remove pm_qos request after hw unregister.Vivek Natarajan1-2/+1
Update pm_qos before removing it in deinit_device to prevent this warning: pm_qos_update_request() called for unknown object. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15carl9170: fix usb anchor wait timeoutChristian Lamparter1-2/+2
usb_wait_anchor_empty_timeout's @timeout wants milliseconds and not jiffies. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds26-152/+289
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits) can-bcm: fix minor heap overflow gianfar: Do not call device_set_wakeup_enable() under a spinlock ipv6: Warn users if maximum number of routes is reached. docs: Add neigh/gc_thresh3 and route/max_size documentation. axnet_cs: fix resume problem for some Ax88790 chip ipv6: addrconf: don't remove address state on ifdown if the address is being kept tcp: Don't change unlocked socket state in tcp_v4_err(). x25: Prevent crashing when parsing bad X.25 facilities cxgb4vf: add call to Firmware to reset VF State. cxgb4vf: Fail open if link_start() fails. cxgb4vf: flesh out PCI Device ID Table ... cxgb4vf: fix some errors in Gather List to skb conversion cxgb4vf: fix bug in Generic Receive Offload cxgb4vf: don't implement trivial (and incorrect) ndo_select_queue() ixgbe: Look inside vlan when determining offload protocol. bnx2x: Look inside vlan when determining checksum proto. vlan: Add function to retrieve EtherType from vlan packets. virtio-net: init link state correctly ucc_geth: Fix deadlock ucc_geth: Do not bring the whole IF down when TX failure. ...
2010-11-12gianfar: Do not call device_set_wakeup_enable() under a spinlockRafael J. Wysocki1-2/+3
The gianfar driver calls device_set_wakeup_enable() under a spinlock, which causes a problem to happen after the recent core power management changes, because this function can sleep now. Fix this by moving the device_set_wakeup_enable() call out of the spinlock-protected area. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12axnet_cs: fix resume problem for some Ax88790 chipKen Kawasaki1-10/+20
axnet_cs: Some Ax88790 chip need to reinitialize the CISREG_CCSR register after resume. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12cxgb4vf: add call to Firmware to reset VF State.Casey Leedom3-0/+36
Add call to Firmware to reset its VF State when we first attach to the VF. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12cxgb4vf: Fail open if link_start() fails.Casey Leedom1-1/+3
Fail open if link_start() fails. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12cxgb4vf: flesh out PCI Device ID Table ...Casey Leedom1-0/+8
Add a bunch of T4 Device IDs for the VF Driver. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12cxgb4vf: fix some errors in Gather List to skb conversionCasey Leedom1-47/+74
There were some errors in the way that internal Gather Lists were being translated into skb's. This also makes the VF Driver look more like the PF Driver to facilitate easier comarison. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12cxgb4vf: fix bug in Generic Receive OffloadCasey Leedom1-0/+1
Fix botch in Generic Receive Offload (the Packet Gather List Total length field wasn't being initialized). Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-10 12:22:09 +0000