summaryrefslogtreecommitdiff
path: root/drivers/net/smc91x.h
AgeCommit message (Collapse)AuthorFilesLines
2008-10-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-10/+3
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
2008-09-24smc91x: SMC_IO_SHIFT platform data support for default caseMagnus Damm1-0/+2
Commit 159198862adad7109bb347bb30a620f67beac45f added SMC_IO_SHIFT platform data support. After that ARM board support was added. The default case is still missing though, so on SuperH SMC_IO_SHIFT is constantly zero regardless of what you pass as platform data. Signed-off-by: Magnus Damm <damm@igel.co.jp> Test-by: Luca Santini <luca.santini@spesonline.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-09Add support for the Arcom/Eurotech Viper SBC onboard ethernet.Marc Zyngier1-1/+2
Signed-off-by: Marc Zyngier <marc.zyngier@altran.com>
2008-09-09Export smc91x led definitionsMarc Zyngier1-8/+0
Now that we can configure smc91x leds from its platform data, it seems rather useful to move the led definitions to the externally visible header file. Signed-off-by: Marc Zyngier <marc.zyngier@altran.com>
2008-09-07[NET] smc91x: provide configurable ledsRussell King1-1/+1
This patch provides a mechanism for platforms to be able to supply the LED configuration via platform data, rather than having to hard code it in smc91x.h. Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King1-3/+3
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[ARM] pxa: make littleton to use the new smc91x platform dataEric Miao1-1/+2
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[ARM] pxa: make zylonite to use the new smc91x platform dataEric Miao1-17/+2
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[ARM] pxa: make mainstone to use the new smc91x platform dataEric Miao1-6/+27
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[ARM] pxa: make lubbock to use new smc91x platform dataEric Miao1-2/+1
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform dataEric Miao1-3/+3
Now that the original SMC_USE_PXA_DMA specific code will always being built if CONFIG_ARCH_PXA is defined, so to make this part of the code to be PXA public, and still prevent it from being built if support of PXA is not selected. A SMC91X_USE_DMA flag is added to the platform data to allow platform to choose its usage of DMA. Note this flag itself is so named to be generic enough (assuming other platforms can also use DMA). It keeps backward compatibility to set the SMC91X_USE_DMA flag if SMC_USE_PXA_DMA is still defined. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variableEric Miao1-0/+3
Now one can use the following code #define SMC_IO_SHIFT lp->io_shift to make SMC_IO_SHIFT a variable. This, however, will slightly increase the CPU overhead and have negative impact on the network performance. The tradeoff is, this can be specified in the smc91x platform data so that multiple boards support can be built in a single zImage. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_*Eric Miao1-10/+3
Let's simplify the logic and avoid confusion, the use of SMC91X_USE_* is favored than SMC_CAN_USE_*, if platform data isn't given, convert the hardcoded SMC_CAN_USE_* to SMC91X_USE_*. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-11smc91x: fix build error from the SMC_GET_MAC_ADDR API changeBryan Wu1-4/+4
Cc: Jeff Garzik <jeff@garzik.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-17Merge branch 'master' of ↵David S. Miller1-4/+4
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-04-07Revert "smc91x: fix build breakage from the SMC_GET_MAC_ADDR API upgrade"Linus Torvalds1-4/+4
This reverts commit 9e6db60825ef7e7999abc610ce256ba768e58162, which was merged without the API it needed, causing build breakage. Reported-by: Bryan Wu <cooloney@kernel.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-27Merge branch 'master' of ↵David S. Miller1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/usb/rndis_host.c drivers/net/wireless/b43/dma.c net/ipv6/ndisc.c
2008-03-25smc91x: fix build breakage from the SMC_GET_MAC_ADDR API upgradeBryan Wu1-4/+4
Cc: Jeff Garzik <jeff@garzik.org> Cc: Deepak Saxena <dsaxena@plexity.net> Cc: Nicolas Pitre <nico@cam.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-17smc91x: make superh use default config V2Magnus Damm1-30/+0
Removes superh board specific configuration from the header file. These boards will instead be configured using platform data. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-17smc91x: add insw/outsw to default config V2Magnus Damm1-0/+2
This patch makes sure SMC_insw()/SMC_outsw() are defined for the default configuration. Without this change BUG()s will be triggered when using 16-bit only platform data and the default configuration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-17smc91x: introduce platform data flags V2Magnus Damm1-22/+35
This patch introduces struct smc91x_platdata and modifies the driver so bus width is checked during run time using SMC_nBIT() instead of SMC_CAN_USE_nBIT. V2 keeps static configuration lean using SMC_DYNAMIC_BUS_CONFIG. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-17smc91x: pass along private data V2Magnus Damm1-125/+129
Pass a private data pointer to macros and functions. This makes it easy to later on make run time decisions. This patch does not change any logic. These changes should be optimized away during compilation. V2 changes the macro argument name from "priv" to "lp". Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-08mn10300: add the MN10300/AM33 architecture to the kernelDavid Howells1-0/+12
Add architecture support for the MN10300/AM33 CPUs produced by MEI to the kernel. This patch also adds board support for the ASB2303 with the ASB2308 daughter board, and the ASB2305. The only processor supported is the MN103E010, which is an AM33v2 core plus on-chip devices. [akpm@linux-foundation.org: nuke cvs control strings] Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com> Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-28[ARM] 4746/1: pcm027: network support for phyCORE-PXA270Robert Schwebel1-1/+2
This patch adds SMC91x support for the phyCORE-PXA270 CPU module (aka PCM-027). Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[NET] smc91x: Make smc91x use IRQ resource trigger flagsRussell King1-14/+7
smc91x is shared between many different platforms. Each platform needs to specify the interrupt type, and in some cases the irq type depends on more than just the build configuration - it depends on runtime checks. Rather than throwing this code into the SMC_IRQ_FLAGS definition, provide a way for these flags to be passed via the IRQ resource itself. Note that IRQF_TRIGGER_* constants are intentionally defined to correspond with the IORESOURCE_IRQ_* interrupt type flags, in much the same way that the low bits of PCI iomem resources correspond with the BAR flag bits. Also provide a way to configure smc91x to read the IRQ flags from the resource. Once all platforms have been converted over (signified by all definitions of SMC_IRQ_FLAGS being -1) SMC_IRQ_FLAGS should be removed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@redhat.com>
2007-11-23Blackfin SMC91x Driver: punt CONFIG_BFIN -- we already have CONFIG_BLACKFINMike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-10add support for smc91x ethernet interface on zyloniteeric miao1-0/+15
This patch adds LAN91C111 ethernet interface support for zylonite (a.k.a Marvell's PXA3xx Development Platform) with smc91x driver. It would be better if a patch would support zylonite along with all other PXA boards with a single binary of smc91x driver, but it looks quite difficult for the moment, so ugly #ifdef is still used here. Signed-off-by: Aleksey Makarov <amakarov@ru.mvista.com> Acked-by: eric miao <eric.miao@marvell.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15[NET] smc91x: fix PXA DMA support codeRussell King1-8/+56
The PXA DMA support code for smc91x doesn't pass a struct device to the dma_*map_single() functions, which leads to an oops in the dma bounce code. We have a struct device which was used to probe the SMC chip. Use it. (This patch is slightly larger because it requires struct smc_local to move into the header file.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-10smc91x Hitachi Solution Engine (SuperH) SupportNobuhiro Iwamatsu1-0/+1
Hi, all. This patch supports Hitachi Solution Engine (SuperH) of smc91x. Please apply this patch . regards, Nobuhiro -- Nobuhiro Iwamatsu E-Mail : iwamatsu@nigauri.org GPG ID : 3170EBE9 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-07net: smc91x: Build fixes for general sh boards.Paul Mundt1-3/+1
SH boards in general only wire this up in 8 or 16-bit mode, and as we never had the wrappers for 32-bit mode defined, SMC_CAN_USE_32BIT caused build failure for the non-Solution Engine boards. This gets it building again. Also kill off the straggling set_irq_type() definition, this is left over cruft that was missed when the rest of it switched to IRQ flags. Signed-off-by: Paul Mundt <lethal@linux-sh.org> -- drivers/net/smc91x.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-11Blackfin SMC91X ethernet supporting driver: SMC91C111 LEDs are note drived ↵Jean-Christian de Rivaz1-0/+2
in the kernel like in uboot Signed-off-by: Jean-Christian de Rivaz <jc@eclis.ch> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-03smc91x: sh solution engine fixes.Paul Mundt1-4/+1
The current smc91x I/O routines ifdef the solution engine subtypes individually, which is rather bogus, as they can simply use CONFIG_SOLUTION_ENGINE instead. This fixes it for some of the other solution engines that weren't included in the ifdef list (SH7206 specifically). There are also inb/outb definitions which are totally bogus (missing brackets in _both_ cases, SMC_CAN_USE_8BIT == 0, and even better, they try to use a 16-bit access to fake 8-bit access). Kill that nonsense off completely. Signed-off-by: Paul Mundt <lethal@linux-sh.org> -- drivers/net/smc91x.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-08smc91x SuperH supportNobuhiro Iwamatsu1-0/+34
This patch supports SuperH of smc91x. smc91x installed on the board of SuperH comes to work by applying this patch. Please apply this patch . Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-07Blackfin: add blackfin support in smc91x ethernet controller driverWu, Bryan1-0/+47
As SMC91X ethernet controller are used in blackfin STAMP 533 development board, this patch add blackfin support to the smc91x linux driver. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-11[PATCH] smc91x: Kill off excessive versatile hooks.Paul Mundt1-90/+0
This looks like a result of too many auto-merges. The CONFIG_ARCH_VERSATILE case was handled a total of 6 times. This kills 5 of them. Signed-off-by: Paul Mundt <lethal@linux-sh.org> -- drivers/net/smc91x.h | 90 --------------------------------------------------- 1 file changed, 90 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-04[PATCH] net: smc91x add missing bracketMariusz Kozlowski1-1/+1
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-04[PATCH] Update smc91x driver with ARM Versatile board infoDeepak Saxena1-0/+18
We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>) Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Nicolas Pitre <nico@cam.org> On Fri, 20 Oct 2006 22:50:40 +0100 Russell King <rmk@arm.linux.org.uk> wrote: > On Fri, Oct 20, 2006 at 02:42:04PM -0700, akpm@osdl.org wrote: > > We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new > > generic IRQ layer will complain thusly: > > I don't think I heard anything back from my previous suggestion that > the IRQ flags are passed through the platform device IRQ resource. > > Doing so would avoid adding yet another platform specific block into > the file. > > BTW, Integrator platforms will also suffer from this, which will add > another ifdef to this header. > > Let's do it right and arrange to pass these flags from the platform > code. It's not like they're in a critical path. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-04[PATCH] __iomem annotations: smc91xAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-10-21[PATCH] Update smc91x driver with ARM Versatile board infoDeepak Saxena1-0/+18
We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>) Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Nicolas Pitre <nico@cam.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-11[PATCH] Update smc91x driver with ARM Versatile board infoDeepak Saxena1-0/+18
We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>) Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Nicolas Pitre <nico@cam.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells1-1/+1
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-29[PATCH] OMAP: Add smc91x support for TI OMAP2420 H4 boardKomal Shah1-0/+1
Add smc91x support for TI OMAP2420 H4 EVM board. Cc: <nico@cam.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-25[PATCH] Update smc91x driver with ARM Versatile board infoDeepak Saxena1-0/+18
We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>) Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Nicolas Pitre <nico@cam.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19[PATCH] build fixes: smc91xDavid Brownell1-6/+0
Unclear how these bugs arrived, presumably from incorrect cleanup of the 16-bit-only paths, but smc91x wouldn't build for OMAP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Nicolas Pitre <nico@cam.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19[PATCH] Update smc91x driver with ARM Versatile board infoDeepak Saxena1-0/+18
We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>) Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Nicolas Pitre <nico@cam.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-14[PATCH] smc91x: disable DMA mode on the logicpd pxa270Lennert Buytenhek1-5/+0
Enabling PXA DMA for the smc91x on the logicpd pxa270 produces unacceptable interference with the TFT panel, so disable it. Also delete the lpd270 versions of the SMC_{in,out}[bl]() macros, as they aren't used, since the board only supports 16bit accesses. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12[PATCH] Update smc91x driver with ARM Versatile board infoDeepak Saxena1-0/+18
We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>) Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-02[PATCH] irq-flags: drivers/net: Use the new IRQF_ constantsThomas Gleixner1-2/+2
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-20Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-16/+28
* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits) [ARM] 3559/1: S3C2442: core and serial port [ARM] 3557/1: S3C24XX: centralise and cleanup uart registration [ARM] 3558/1: SMDK24XX: LED platform devices [ARM] 3534/1: add spi support to lubbock platform [ARM] 3554/1: ARM: Fix dyntick locking [ARM] 3553/1: S3C24XX: earlier print of cpu idcode info [ARM] 3552/1: S3C24XX: Move VA of GPIO for low-level debug [ARM] 3551/1: S3C24XX: PM code failes to compile with CONFIG_DCACHE_WRITETHROUGH [ARM] 3550/1: OSIRIS: fix serial port map for 1:1 [ARM] 3548/1: Fix the ARMv6 CPU id in compressed/head.S [ARM] 3335/1: Old-abi Thumb sys_syscall broken [ARM] 3467/1: [3/3] Support for Philips PNX4008 platform: defconfig [ARM] 3466/1: [2/3] Support for Philips PNX4008 platform: chip support [ARM] 3465/1: [1/3] Support for Philips PNX4008 platform: headers [ARM] 3407/1: lpd7x: documetation update [ARM] 3406/1: lpd7x: compilation fix for smc91x [ARM] 3405/1: lpd7a40x: CPLD ssp driver [ARM] 3404/1: lpd7a40x: AMBA CLCD support [ARM] 3403/1: lpd7a40x: updated default configurations [ARM] 3402/1: lpd7a40x: serial driver bug fix ...
2006-06-18[ARM] 3406/1: lpd7x: compilation fix for smc91xMarc Singer1-16/+28
Patch from Marc Singer Reworking of the adaptation macros to allow driver to compile again for the lpd7x's. Also, support added for the lh79520 so it may use the smc91x. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 15:37:38 +0000