summaryrefslogtreecommitdiff
path: root/drivers/net/macvlan.c
AgeCommit message (Collapse)AuthorFilesLines
2022-06-09vlan: adopt u64_stats_tEric Dumazet1-9/+9
As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type") we should use u64_stats_t and related accessors to avoid load/store tearing. Add READ_ONCE() when reading rx_errors & tx_dropped. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09net: rename reference+tracking helpersJakub Kicinski1-2/+2
Netdev reference helpers have a dev_ prefix for historic reasons. Renaming the old helpers would be too much churn but we can rename the tracking ones which are relatively recent and should be the default for new code. Rename: dev_hold_track() -> netdev_hold() dev_put_track() -> netdev_put() dev_replace_track() -> netdev_ref_replace() Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-09rtnetlink: add extack support in fdb del handlersAlaa Mohamed1-1/+2
Add extack support to .ndo_fdb_del in netdevice.h and all related methods. Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06net: add netif_inherit_tso_max()Jakub Kicinski1-4/+2
To make later patches smaller create a helper for inheriting the TSO limitations of a lower device. The TSO in the name is not an accident, subsequent patches will replace GSO with TSO in more names. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13macvlan: Fix leaking skb in source mode with nodst optionMartin Willi1-2/+6
The MACVLAN receive handler clones skbs to all matching source MACVLAN interfaces, before it passes the packet along to match on destination based MACVLANs. When using the MACVLAN nodst mode, passing the packet to destination based MACVLANs is omitted and the handler returns with RX_HANDLER_CONSUMED. However, the passed skb is not freed, leaking for any packet processed with the nodst option. Properly free the skb when consuming packets to fix that leak. Fixes: 427f0c8c194b ("macvlan: Add nodst option to macvlan type source") Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-14net: macvlan: add net device refcount trackerZiyang Xuan1-2/+2
Add net device refcount tracker to macvlan. Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-14net: macvlan: fix potential UAF problem for lowerdevZiyang Xuan1-1/+13
Add the reference operation to lowerdev of macvlan to avoid the potential UAF problem under the following known scenario: Someone module puts the NETDEV_UNREGISTER event handler to a work, and lowerdev is accessed in the work handler. But when the work is excuted, lowerdev has been destroyed because upper macvlan did not get reference to lowerdev correctly. That likes as the scenario occurred by commit 563bcbae3ba2 ("net: vlan: fix a UAF in vlan_dev_real_dev()"). Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11net: add per-cpu storage and net->core_statsEric Dumazet1-1/+1
Before adding yet another possibly contended atomic_long_t, it is time to add per-cpu storage for existing ones: dev->tx_dropped, dev->rx_dropped, and dev->rx_nohandler Because many devices do not have to increment such counters, allocate the per-cpu storage on demand, so that dev_get_stats() does not have to spend considerable time folding zero counters. Note that some drivers have abused these counters which were supposed to be only used by core networking stack. v4: should use per_cpu_ptr() in dev_get_stats() (Jakub) v3: added a READ_ONCE() in netdev_core_stats_alloc() (Paolo) v2: add a missing include (reported by kernel test robot <lkp@intel.com>) Change in netdev_core_stats_alloc() (Jakub) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: jeffreyji <jeffreyji@google.com> Reviewed-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220311051420.2608812-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-04net: macvlan: Use netif_rx().Sebastian Andrzej Siewior1-1/+1
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14net: dev: Makes sure netif_rx() can be invoked in any context.Sebastian Andrzej Siewior1-2/+2
Dave suggested a while ago (eleven years by now) "Let's make netif_rx() work in all contexts and get rid of netif_rx_ni()". Eric agreed and pointed out that modern devices should use netif_receive_skb() to avoid the overhead. In the meantime someone added another variant, netif_rx_any_context(), which behaves as suggested. netif_rx() must be invoked with disabled bottom halves to ensure that pending softirqs, which were raised within the function, are handled. netif_rx_ni() can be invoked only from process context (bottom halves must be enabled) because the function handles pending softirqs without checking if bottom halves were disabled or not. netif_rx_any_context() invokes on the former functions by checking in_interrupts(). netif_rx() could be taught to handle both cases (disabled and enabled bottom halves) by simply disabling bottom halves while invoking netif_rx_internal(). The local_bh_enable() invocation will then invoke pending softirqs only if the BH-disable counter drops to zero. Eric is concerned about the overhead of BH-disable+enable especially in regard to the loopback driver. As critical as this driver is, it will receive a shortcut to avoid the additional overhead which is not needed. Add a local_bh_disable() section in netif_rx() to ensure softirqs are handled if needed. Provide __netif_rx() which does not disable BH and has a lockdep assert to ensure that interrupts are disabled. Use this shortcut in the loopback driver and in drivers/net/*.c. Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they can be removed once they are no more users left. Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-23net: remove .ndo_change_proto_downJakub Kicinski1-2/+1
.ndo_change_proto_down was added seemingly to enable out-of-tree implementations. Over 2.5yrs later we still have no real users upstream. Hardwire the generic implementation for now, we can revert once real users materialize. (rocker is a test vehicle, not a user.) We need to drop the optimization on the sysfs side, because unlike ndos priv_flags will be changed at runtime, so we'd need READ_ONCE/WRITE_ONCE everywhere.. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: annotate accesses to dev->gso_max_segsEric Dumazet1-2/+2
dev->gso_max_segs is written under RTNL protection, or when the device is not yet visible, but is read locklessly. Add netif_set_gso_max_segs() helper. Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_segs() where we can to better document what is going on. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: annotate accesses to dev->gso_max_sizeEric Dumazet1-2/+2
dev->gso_max_size is written under RTNL protection, or when the device is not yet visible, but is read locklessly. Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_size() where we can to better document what is going on. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: drivers: get ready for const netdev->dev_addrJakub Kicinski1-1/+2
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. We will make netdev->dev_addr a const. Make sure local references to netdev->dev_addr are constant. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02net: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski1-1/+1
Convert from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02net: use eth_hw_addr_set()Jakub Kicinski1-1/+1
Convert sw drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-4/+4
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01macvlan: Fix a typoZheng Yongjun1-1/+1
underlaying ==> underlying Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-27macvlan: Use 'hash' iterators to simplify codeChristophe JAILLET1-27/+18
Use 'hash_for_each_rcu' and 'hash_for_each_safe' instead of hand writing them. This saves some lines of code, reduce indentation and improve readability. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25macvlan: Add nodst option to macvlan type sourceJethro Beekman1-5/+14
The default behavior for source MACVLAN is to duplicate packets to appropriate type source devices, and then do the normal destination MACVLAN flow. This patch adds an option to skip destination MACVLAN processing if any matching source MACVLAN device has the option set. This allows setting up a "catch all" device for source MACVLAN: create one or more devices with type source nodst, and one device with e.g. type vepa, and incoming traffic will be received on exactly one device. v2: netdev wants non-standard line length Signed-off-by: Jethro Beekman <kernel@jbeekman.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05macvlan: remove redundant null check on dataYunjian Wang1-1/+1
Because macvlan_common_newlink() and macvlan_changelink() already checked NULL data parameter, so the additional check is unnecessary, just remove it. Fixes: 79cf79abce71 ("macvlan: add source mode") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-03macvlan: Support for high multicast packet rateThomas Karlsson1-2/+38
Background: Broadcast and multicast packages are enqueued for later processing. This queue was previously hardcoded to 1000. This proved insufficient for handling very high packet rates. This resulted in packet drops for multicast. While at the same time unicast worked fine. The change: This patch make the queue length adjustable to accommodate for environments with very high multicast packet rate. But still keeps the default value of 1000 unless specified. The queue length is specified as a request per macvlan using the IFLA_MACVLAN_BC_QUEUE_LEN parameter. The actual used queue length will then be the maximum of any macvlan connected to the same port. The actual used queue length for the port can be retrieved (read only) by the IFLA_MACVLAN_BC_QUEUE_LEN_USED parameter for verification. This will be followed up by a patch to iproute2 in order to adjust the parameter from userspace. Signed-off-by: Thomas Karlsson <thomas.karlsson@paneda.se> Link: https://lore.kernel.org/r/dd4673b2-7eab-edda-6815-85c67ce87f63@paneda.se Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07net: macvlan: remove redundant initialization in macvlan_dev_netpoll_setupMenglong Dong1-1/+1
The initialization for err with 0 seems useless, as it is soon updated with -ENOMEM. So, we can remove it. Changes since v1: -Keep -ENOMEM still. Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Link: https://lore.kernel.org/r/1604541244-3241-1-git-send-email-dong.menglong@zte.com.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03net: macvlan: Demote nonconformant function headerLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/macvlan.c:1350: warning: Function parameter or member 'vlan' not described in 'macvlan_changelink_sources' drivers/net/macvlan.c:1350: warning: Function parameter or member 'mode' not described in 'macvlan_changelink_sources' drivers/net/macvlan.c:1350: warning: Function parameter or member 'data' not described in 'macvlan_changelink_sources' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201102114512.1062724-27-lee.jones@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-18macvlan: validate setting of multiple remote source MAC addressesAlvin Šipraga1-4/+17
Remote source MAC addresses can be set on a 'source mode' macvlan interface via the IFLA_MACVLAN_MACADDR_DATA attribute. This commit tightens the validation of these MAC addresses to match the validation already performed when setting or adding a single MAC address via the IFLA_MACVLAN_MACADDR attribute. iproute2 uses IFLA_MACVLAN_MACADDR_DATA for its 'macvlan macaddr set' command, and IFLA_MACVLAN_MACADDR for its 'macvlan macaddr add' command, which demonstrates the inconsistent behaviour that this commit addresses: # ip link add link eth0 name macvlan0 type macvlan mode source # ip link set link dev macvlan0 type macvlan macaddr add 01:00:00:00:00:00 RTNETLINK answers: Cannot assign requested address # ip link set link dev macvlan0 type macvlan macaddr set 01:00:00:00:00:00 # ip -d link show macvlan0 5: macvlan0@eth0: <BROADCAST,MULTICAST,DYNAMIC,UP,LOWER_UP> mtu 1500 ... link/ether 2e:ac:fd:2d:69:f8 brd ff:ff:ff:ff:ff:ff promiscuity 0 macvlan mode source remotes (1) 01:00:00:00:00:00 numtxqueues 1 ... With this change, the 'set' command will (rightly) fail in the same way as the 'add' command. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-28net: get rid of lockdep_set_class_and_subclass()Cong Wang1-3/+2
lockdep_set_class_and_subclass() is meant to reduce the _nested() annotations by assigning a default subclass. For addr_list_lock, we have to compute the subclass at run-time as the netdevice topology changes after creation. So, we should just get rid of these lockdep_set_class_and_subclass() and stick with our _nested() annotations. Fixes: 845e0ebb4408 ("net: change addr_list_lock back to static key") Suggested-by: Taehee Yoo <ap420073@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-09net: change addr_list_lock back to static keyCong Wang1-2/+11
The dynamic key update for addr_list_lock still causes troubles, for example the following race condition still exists: CPU 0: CPU 1: (RCU read lock) (RTNL lock) dev_mc_seq_show() netdev_update_lockdep_key() -> lockdep_unregister_key() -> netif_addr_lock_bh() because lockdep doesn't provide an API to update it atomically. Therefore, we have to move it back to static keys and use subclass for nest locking like before. In commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), I already reverted most parts of commit ab92d68fc22f ("net: core: add generic lockdep keys"). This patch reverts the rest and also part of commit f3b0a18bb6cb ("net: remove unnecessary variables and callback"). After this patch, addr_list_lock changes back to using static keys and subclasses to satisfy lockdep. Thanks to dev->lower_level, we do not have to change back to ->ndo_get_lock_subclass(). And hopefully this reduces some syzbot lockdep noises too. Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com Cc: Taehee Yoo <ap420073@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26macvlan: Skip loopback packets in RX handlerAlexander Sverdlin1-0/+4
Ignore loopback-originatig packets soon enough and don't try to process L2 header where it doesn't exist. The very similar br_handle_frame() in bridge code performs exactly the same check. This is an example of such ICMPv6 packet: skb len=96 headroom=40 headlen=96 tailroom=56 mac=(40,0) net=(40,40) trans=80 shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0)) csum(0xae2e9a2f ip_summed=1 complete_sw=0 valid=0 level=0) hash(0xc97ebd88 sw=1 l4=1) proto=0x86dd pkttype=5 iif=24 dev name=etha01.212 feat=0x0x0000000040005000 skb headroom: 00000000: 00 7c 86 52 84 88 ff ff 00 00 00 00 00 00 08 00 skb headroom: 00000010: 45 00 00 9e 5d 5c 40 00 40 11 33 33 00 00 00 01 skb headroom: 00000020: 02 40 43 80 00 00 86 dd skb linear: 00000000: 60 09 88 bd 00 38 3a ff fe 80 00 00 00 00 00 00 skb linear: 00000010: 00 40 43 ff fe 80 00 00 ff 02 00 00 00 00 00 00 skb linear: 00000020: 00 00 00 00 00 00 00 01 86 00 61 00 40 00 00 2d skb linear: 00000030: 00 00 00 00 00 00 00 00 03 04 40 e0 00 00 01 2c skb linear: 00000040: 00 00 00 78 00 00 00 00 fd 5f 42 68 23 87 a8 81 skb linear: 00000050: 00 00 00 00 00 00 00 00 01 01 02 40 43 80 00 00 skb tailroom: 00000000: ... skb tailroom: 00000010: ... skb tailroom: 00000020: ... skb tailroom: 00000030: ... Call Trace, how it happens exactly: ... macvlan_handle_frame+0x321/0x425 [macvlan] ? macvlan_forward_source+0x110/0x110 [macvlan] __netif_receive_skb_core+0x545/0xda0 ? enqueue_task_fair+0xe5/0x8e0 ? __netif_receive_skb_one_core+0x36/0x70 __netif_receive_skb_one_core+0x36/0x70 process_backlog+0x97/0x140 net_rx_action+0x1eb/0x350 ? __hrtimer_run_queues+0x136/0x2e0 __do_softirq+0xe3/0x383 do_softirq_own_stack+0x2a/0x40 </IRQ> do_softirq.part.4+0x4e/0x50 netif_rx_ni+0x60/0xd0 dev_loopback_xmit+0x83/0xf0 ip6_finish_output2+0x575/0x590 [ipv6] ? ip6_cork_release.isra.1+0x64/0x90 [ipv6] ? __ip6_make_skb+0x38d/0x680 [ipv6] ? ip6_output+0x6c/0x140 [ipv6] ip6_output+0x6c/0x140 [ipv6] ip6_send_skb+0x1e/0x60 [ipv6] rawv6_sendmsg+0xc4b/0xe10 [ipv6] ? proc_put_long+0xd0/0xd0 ? rw_copy_check_uvector+0x4e/0x110 ? sock_sendmsg+0x36/0x40 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x2b6/0x2d0 ? proc_dointvec+0x23/0x30 ? addrconf_sysctl_forward+0x8d/0x250 [ipv6] ? dev_forward_change+0x130/0x130 [ipv6] ? _raw_spin_unlock+0x12/0x30 ? proc_sys_call_handler.isra.14+0x9f/0x110 ? __call_rcu+0x213/0x510 ? get_max_files+0x10/0x10 ? trace_hardirqs_on+0x2c/0xe0 ? __sys_sendmsg+0x63/0xa0 __sys_sendmsg+0x63/0xa0 do_syscall_64+0x6c/0x1e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07netpoll: accept NULL np argument in netpoll_send_skb()Eric Dumazet1-3/+2
netpoll_send_skb() callers seem to leak skb if the np pointer is NULL. While this should not happen, we can make the code more robust. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04net: partially revert dynamic lockdep key changesCong Wang1-0/+2
This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
Simple overlapping changes to linux/vermagic.h Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22macvlan: silence RCU list debugging warningWei Yongjun1-1/+2
macvlan_hash_lookup() uses list_for_each_entry_rcu() for traversing should either under RCU in fast path or the protection of rtnl_mutex. In the case of holding RTNL, we should add the corresponding lockdep expression to silence the following false-positive warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc1-next-20200416-00003-ga3b8d28bc #1 Not tainted ----------------------------- drivers/net/macvlan.c:126 RCU-list traversed in non-reader section!! Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21macvlan: fix null dereference in macvlan_device_event()Taehee Yoo1-1/+1
In the macvlan_device_event(), the list_first_entry_or_null() is used. This function could return null pointer if there is no node. But, the macvlan module doesn't check the null pointer. So, null-ptr-deref would occur. bond0 | +----+-----+ | | macvlan0 macvlan1 | | dummy0 dummy1 The problem scenario. If dummy1 is removed, 1. ->dellink() of dummy1 is called. 2. NETDEV_UNREGISTER of dummy1 notification is sent to macvlan module. 3. ->dellink() of macvlan1 is called. 4. NETDEV_UNREGISTER of macvlan1 notification is sent to bond module. 5. __bond_release_one() is called and it internally calls dev_set_mac_address(). 6. dev_set_mac_address() calls the ->ndo_set_mac_address() of macvlan1, which is macvlan_set_mac_address(). 7. macvlan_set_mac_address() calls the dev_set_mac_address() with dummy1. 8. NETDEV_CHANGEADDR of dummy1 is sent to macvlan module. 9. In the macvlan_device_event(), it calls list_first_entry_or_null(). At this point, dummy1 and macvlan1 were removed. So, list_first_entry_or_null() will return NULL. Test commands: ip netns add nst ip netns exec nst ip link add bond0 type bond for i in {0..10} do ip netns exec nst ip link add dummy$i type dummy ip netns exec nst ip link add macvlan$i link dummy$i \ type macvlan mode passthru ip netns exec nst ip link set macvlan$i master bond0 done ip netns del nst Splat looks like: [ 40.585687][ T146] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEI [ 40.587249][ T146] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 40.588342][ T146] CPU: 1 PID: 146 Comm: kworker/u8:2 Not tainted 5.7.0-rc1+ #532 [ 40.589299][ T146] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 40.590469][ T146] Workqueue: netns cleanup_net [ 40.591045][ T146] RIP: 0010:macvlan_device_event+0x4e2/0x900 [macvlan] [ 40.591905][ T146] Code: 00 00 00 00 00 fc ff df 80 3c 06 00 0f 85 45 02 00 00 48 89 da 48 b8 00 00 00 00 00 fc ff d2 [ 40.594126][ T146] RSP: 0018:ffff88806116f4a0 EFLAGS: 00010246 [ 40.594783][ T146] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 40.595653][ T146] RDX: 0000000000000000 RSI: ffff88806547ddd8 RDI: ffff8880540f1360 [ 40.596495][ T146] RBP: ffff88804011a808 R08: fffffbfff4fb8421 R09: fffffbfff4fb8421 [ 40.597377][ T146] R10: ffffffffa7dc2107 R11: 0000000000000000 R12: 0000000000000008 [ 40.598186][ T146] R13: ffff88804011a000 R14: ffff8880540f1000 R15: 1ffff1100c22de9a [ 40.599012][ T146] FS: 0000000000000000(0000) GS:ffff888067800000(0000) knlGS:0000000000000000 [ 40.600004][ T146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.600665][ T146] CR2: 00005572d3a807b8 CR3: 000000005fcf4003 CR4: 00000000000606e0 [ 40.601485][ T146] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 40.602461][ T146] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 40.603443][ T146] Call Trace: [ 40.603871][ T146] ? nf_tables_dump_setelem+0xa0/0xa0 [nf_tables] [ 40.604587][ T146] ? macvlan_uninit+0x100/0x100 [macvlan] [ 40.605212][ T146] ? __module_text_address+0x13/0x140 [ 40.605842][ T146] notifier_call_chain+0x90/0x160 [ 40.606477][ T146] dev_set_mac_address+0x28e/0x3f0 [ 40.607117][ T146] ? netdev_notify_peers+0xc0/0xc0 [ 40.607762][ T146] ? __module_text_address+0x13/0x140 [ 40.608440][ T146] ? notifier_call_chain+0x90/0x160 [ 40.609097][ T146] ? dev_set_mac_address+0x1f0/0x3f0 [ 40.609758][ T146] dev_set_mac_address+0x1f0/0x3f0 [ 40.610402][ T146] ? __local_bh_enable_ip+0xe9/0x1b0 [ 40.611071][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.611823][ T146] ? netdev_notify_peers+0xc0/0xc0 [ 40.612461][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.613213][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.613963][ T146] ? __local_bh_enable_ip+0xe9/0x1b0 [ 40.614631][ T146] ? bond_time_in_interval.isra.31+0x90/0x90 [bonding] [ 40.615484][ T146] ? __bond_release_one+0x9f0/0x12c0 [bonding] [ 40.616230][ T146] __bond_release_one+0x9f0/0x12c0 [bonding] [ 40.616949][ T146] ? bond_enslave+0x47c0/0x47c0 [bonding] [ 40.617642][ T146] ? lock_downgrade+0x730/0x730 [ 40.618218][ T146] ? check_flags.part.42+0x450/0x450 [ 40.618850][ T146] ? __mutex_unlock_slowpath+0xd0/0x670 [ 40.619519][ T146] ? trace_hardirqs_on+0x30/0x180 [ 40.620117][ T146] ? wait_for_completion+0x250/0x250 [ 40.620754][ T146] bond_netdev_event+0x822/0x970 [bonding] [ 40.621460][ T146] ? __module_text_address+0x13/0x140 [ 40.622097][ T146] notifier_call_chain+0x90/0x160 [ 40.622806][ T146] rollback_registered_many+0x660/0xcf0 [ 40.623522][ T146] ? netif_set_real_num_tx_queues+0x780/0x780 [ 40.624290][ T146] ? notifier_call_chain+0x90/0x160 [ 40.624957][ T146] ? netdev_upper_dev_unlink+0x114/0x180 [ 40.625686][ T146] ? __netdev_adjacent_dev_unlink_neighbour+0x30/0x30 [ 40.626421][ T146] ? mutex_is_locked+0x13/0x50 [ 40.627016][ T146] ? unregister_netdevice_queue+0xf2/0x240 [ 40.627663][ T146] unregister_netdevice_many.part.134+0x13/0x1b0 [ 40.628362][ T146] default_device_exit_batch+0x2d9/0x390 [ 40.628987][ T146] ? unregister_netdevice_many+0x40/0x40 [ 40.629615][ T146] ? dev_change_net_namespace+0xcb0/0xcb0 [ 40.630279][ T146] ? prepare_to_wait_exclusive+0x2e0/0x2e0 [ 40.630943][ T146] ? ops_exit_list.isra.9+0x97/0x140 [ 40.631554][ T146] cleanup_net+0x441/0x890 [ ... ] Fixes: e289fd28176b ("macvlan: fix the problem when mac address changes for passthru mode") Reported-by: syzbot+5035b1f9dc7ea4558d5a@syzkaller.appspotmail.com Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09macvlan: add cond_resched() during multicast processingMahesh Bandewar1-0/+2
The Rx bound multicast packets are deferred to a workqueue and macvlan can also suffer from the same attack that was discovered by Syzbot for IPvlan. This solution is not as effective as in IPvlan. IPvlan defers all (Tx and Rx) multicast packet processing to a workqueue while macvlan does this way only for the Rx. This fix should address the Rx codition to certain extent. Tx is still suseptible. Tx multicast processing happens when .ndo_start_xmit is called, hence we cannot add cond_resched(). However, it's not that severe since the user which is generating / flooding will be affected the most. Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+3
2020-01-16macvlan: use skb_reset_mac_header() in macvlan_queue_xmit()Eric Dumazet1-2/+3
I missed the fact that macvlan_broadcast() can be used both in RX and TX. skb_eth_hdr() makes only sense in TX paths, so we can not use it blindly in macvlan_broadcast() Fixes: 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jurgen Van Ham <juvanham@gmail.com> Tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
The ungrafting from PRIO bug fixes in net, when merged into net-next, merge cleanly but create a build failure. The resolution used here is from Petr Machata. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08macvlan: do not assume mac_header is set in macvlan_broadcast()Eric Dumazet1-1/+1
Use of eth_hdr() in tx path is error prone. Many drivers call skb_reset_mac_header() before using it, but others do not. Commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()") attempted to fix this generically, but commit d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option") brought back the macvlan bug. Lets add a new helper, so that tx paths no longer have to call skb_reset_mac_header() only to get a pointer to skb->data. Hopefully we will be able to revert 6d1ccff62780 ("net: reset mac header in dev_start_xmit()") and save few cycles in transmit fast path. BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline] BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579 CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145 __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] mc_hash drivers/net/macvlan.c:251 [inline] macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 macvlan_queue_xmit drivers/net/macvlan.c:520 [inline] macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559 __netdev_start_xmit include/linux/netdevice.h:4447 [inline] netdev_start_xmit include/linux/netdevice.h:4461 [inline] dev_direct_xmit+0x419/0x630 net/core/dev.c:4079 packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240 packet_snd net/packet/af_packet.c:2966 [inline] packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 __sys_sendto+0x262/0x380 net/socket.c:1985 __do_sys_sendto net/socket.c:1997 [inline] __se_sys_sendto net/socket.c:1993 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x442639 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639 RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x163/0x770 mm/slab.c:3665 kmalloc include/linux/slab.h:561 [inline] tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kfree+0x10a/0x2c0 mm/slab.c:3757 tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a4932000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 1025 bytes inside of 4096-byte region [ffff8880a4932000, ffff8880a4933000) The buggy address belongs to the page: page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0 raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000 raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: b863ceb7ddce ("[NET]: Add macvlan driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25net: macvlan: Use the PHY time stamping interface.Richard Cochran1-2/+2
The macvlan layer tests fields of the phy_device in order to determine whether to invoke the PHY's tsinfo ethtool callback. This patch replaces the open coded logic with an invocation of the proper methods. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-25macvlan: schedule bc_work even if errorMenglong Dong1-1/+2
While enqueueing a broadcast skb to port->bc_queue, schedule_work() is called to add port->bc_work, which processes the skbs in bc_queue, to "events" work queue. If port->bc_queue is full, the skb will be discarded and schedule_work(&port->bc_work) won't be called. However, if port->bc_queue is full and port->bc_work is not running or pending, port->bc_queue will keep full and schedule_work() won't be called any more, and all broadcast skbs to macvlan will be discarded. This case can happen: macvlan_process_broadcast() is the pending function of port->bc_work, it moves all the skbs in port->bc_queue to the queue "list", and processes the skbs in "list". During this, new skbs will keep being added to port->bc_queue in macvlan_broadcast_enqueue(), and port->bc_queue may already full when macvlan_process_broadcast() return. This may happen, especially when there are a lot of real-time threads and the process is preempted. Fix this by calling schedule_work(&port->bc_work) even if port->bc_work is full in macvlan_broadcast_enqueue(). Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue") Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: remove unnecessary variables and callbackTaehee Yoo1-7/+0
This patch removes variables and callback these are related to the nested device structure. devices that can be nested have their own nest_level variable that represents the depth of nested devices. In the previous patch, new {lower/upper}_level variables are added and they replace old private nest_level variable. So, this patch removes all 'nest_level' variables. In order to avoid lockdep warning, ->ndo_get_lock_subclass() was added to get lockdep subclass value, which is actually lower nested depth value. But now, they use the dynamic lockdep key to avoid lockdep warning instead of the subclass. So, this patch removes ->ndo_get_lock_subclass() callback. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: core: add generic lockdep keysTaehee Yoo1-12/+0
Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+1
Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29macvlan: Replace strncpy() by strscpy()Gustavo A. R. Silva1-1/+1
The strncpy() function is being deprecated. Replace it by the safer strscpy() and fix the following Coverity warning: "Calling strncpy with a maximum size argument of 16 bytes on destination array ifrr.ifr_ifrn.ifrn_name of size 16 bytes might leave the destination string unterminated." Notice that, unlike strncpy(), strscpy() always null-terminates the destination string. Addresses-Coverity-ID: 1445537 ("Buffer not null terminated") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-20macvlan: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/macvlan.c: In function ‘macvlan_do_ioctl’: drivers/net/macvlan.c:839:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (!net_eq(dev_net(dev), &init_net)) ^ drivers/net/macvlan.c:841:2: note: here case SIOCGHWTSTAMP: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09macvlan: disable SIOCSHWTSTAMP in containerHangbin Liu1-0/+2
Miroslav pointed that with NET_ADMIN enabled in container, a normal user could be mapped to root and is able to change the real device's rx filter via ioctl on macvlan, which would affect the other ptp process on host. Fix it by disabling SIOCSHWTSTAMP in container. Fixes: 254c0a2bfedb ("macvlan: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to real device") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek1-1/+1
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-20macvlan: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to real deviceHangbin Liu1-0/+48
Similiar to commit a6111d3c93d0 ("vlan: Pass SIOC[SG]HWTSTAMP ioctls to real device") and commit 37dd9255b2f6 ("vlan: Pass ethtool get_ts_info queries to real device."), add MACVlan HW ptp support. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 04:54:19 +0000