summaryrefslogtreecommitdiff
path: root/drivers/mtd/maps
AgeCommit message (Collapse)AuthorFilesLines
2023-11-04Merge tag 'mtd/for-6.7' of ↵Linus Torvalds6-30/+16
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd updates from Miquel Raynal: "The main set of changes is related to Uwe's work converting platform remove callbacks to return void. Comes next (in number of changes) Kees' additional structures annotations to improve the sanitizers. The usual amount of cleanups apply. About the more substancial contribution, one main function of the partitions core could return an error which was not checked, this is now fixed. On the bindings side, fixed partitions can now have a compression property. Finally, an erroneous situation is now always avoided in the MAP RAM driver. CFI: - A several years old byte swap has been fixed. NAND: - The subsystem has, as usual, seen a bit of cleanup being done this cycle, typically return values of platform_get_irq() and devm_kasprintf(). There is also a better ECC check in the Arasan driver. This comes with smaller misc changes. - In the SPI-NAND world there is now support for Foresee F35SQA002G, Winbond W25N and XTX XT26 chips. SPI NOR: - For SPI NOR we cleaned the flash info entries in order to have them slimmer and self explanatory. In order to make the entries as slim as possible, we introduced sane default values so that the actual flash entries don't need to specify them. We now use a flexible macro to specify the flash ID instead of the previous INFOx() macros that had hardcoded ID lengths. Instead of: { "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 0) OTP_INFO(256, 3, 0x1000, 0x1000) }, We now use: .id = SNOR_ID(0xef, 0x80, 0x20), .name = "w25q512nwm", .otp = SNOR_OTP(256, 3, 0x1000, 0x1000), - We also removed some flash entries: the very old Catalyst SPI EEPROMs that were introduced once with the SPI-NOR subsystem, and a Fujitsu MRAM. Both should use the at25 EEPROM driver. The latter even has device tree bindings for the at25 driver. - We made sure that the conversion didn't introduce any unwanted changes by comparing the .rodata segment before and after the conversion. The patches landed in linux-next immediately after v6.6-rc2, we haven't seen any regressions yet. - Apart of the autumn cleaning we introduced a new flash entry, at25ff321a, and added block protection support for mt25qu512a" * tag 'mtd/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (91 commits) mtd: cfi_cmdset_0001: Byte swap OTP info mtd: rawnand: meson: check return value of devm_kasprintf() mtd: rawnand: intel: check return value of devm_kasprintf() mtd: rawnand: sh_flctl: Convert to module_platform_driver() mtd: spi-nor: micron-st: use SFDP table for mt25qu512a mtd: spi-nor: micron-st: enable lock/unlock for mt25qu512a mtd: rawnand: Remove unused of_gpio.h inclusion mtd: spinand: Add support for XTX XT26xxxDxxxxx mtd: spinand: winbond: add support for serial NAND flash mtd: rawnand: cadence: Annotate struct cdns_nand_chip with __counted_by mtd: rawnand: Annotate struct mtk_nfc_nand_chip with __counted_by mtd: spinand: add support for FORESEE F35SQA002G mtd: rawnand: rockchip: Use struct_size() mtd: rawnand: arasan: Include ECC syndrome along with in-band data while checking for ECC failure mtd: Use device_get_match_data() mtd: spi-nor: nxp-spifi: Convert to platform remove callback returning void mtd: spi-nor: hisi-sfc: Convert to platform remove callback returning void mtd: maps: sun_uflash: Convert to platform remove callback returning void mtd: maps: sa1100-flash: Convert to platform remove callback returning void mtd: maps: pxa2xx-flash: Convert to platform remove callback returning void ...
2023-10-16mtd: Use device_get_match_data()Rob Herring1-7/+3
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231009172923.2457844-1-robh@kernel.org
2023-10-16mtd: maps: sun_uflash: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-18-u.kleine-koenig@pengutronix.de
2023-10-16mtd: maps: sa1100-flash: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-17-u.kleine-koenig@pengutronix.de
2023-10-16mtd: maps: pxa2xx-flash: Convert to platform remove callback returning voidUwe Kleine-König1-3/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-16-u.kleine-koenig@pengutronix.de
2023-10-16mtd: maps: plat-ram: Convert to platform remove callback returning voidUwe Kleine-König1-5/+3
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-15-u.kleine-koenig@pengutronix.de
2023-10-16mtd: maps: physmap-core: Convert to platform remove callback returning voidUwe Kleine-König1-3/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-14-u.kleine-koenig@pengutronix.de
2023-10-16mtd: maps: lantiq-flash: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/linux-mtd/20231008200143.196369-13-u.kleine-koenig@pengutronix.de
2023-09-11mtd: physmap-core: Restore map_rom fallbackGeert Uytterhoeven1-0/+11
When the exact mapping type driver was not available, the old physmap_of_core driver fell back to mapping the region as ROM. Unfortunately this feature was lost when the DT and pdata cases were merged. Revive this useful feature. Fixes: 642b1e8dbed7bbbf ("mtd: maps: Merge physmap_of.c into physmap-core.c") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/550e8c8c1da4c4baeb3d71ff79b14a18d4194f9e.1693407371.git.geert+renesas@glider.be
2023-08-18mtd: maps: fix -Wvoid-pointer-to-enum-cast warningJustin Stitt1-1/+1
When building with clang 18 I see the following warning: | drivers/mtd/maps/physmap-versatile.c:209:25: warning: cast to smaller | integer type 'enum versatile_flashprot' from 'const void *' [-Wvoid-pointer-to-enum-cast] | 209 | versatile_flashprot = (enum versatile_flashprot)devid->data; This is due to the fact that `devid->data` is a void* while `enum versatile_flashprot` has the size of an int. Cast `devid->data` to a uintptr_t to silence the above warning for clang builds using W=1. Link: https://github.com/ClangBuiltLinux/linux/issues/1910 Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Justin Stitt <justinstitt@google.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230816-void-drivers-mtd-maps-physmap-versatile-v2-1-433a25272bfa@google.com
2023-07-27mtd: Explicitly include correct DT includesRob Herring6-5/+5
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230714174751.4060439-1-robh@kernel.org
2023-07-12mtd: physmap-core: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-2/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230707040622.78174-18-frank.li@vivo.com
2023-07-12mtd: lantiq-flash: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-8/+3
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230707040622.78174-14-frank.li@vivo.com
2023-07-12mtd: plat-ram: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-2/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230707040622.78174-13-frank.li@vivo.com
2023-06-19mtd: maps: pismo: Switch back to use i2c_driver's .probe()Uwe Kleine-König1-1/+1
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230611204327.828122-1-u.kleine-koenig@pengutronix.de
2023-04-19Merge tag 'spi-nor/for-6.4' into mtd/nextMiquel Raynal1-3/+2
SPI NOR core changes: * introduce Read While Write support for flashes featuring several banks * set the 4-Byte Address Mode method based on SFDP data * allow post_sfdp hook to return errors * parse SCCR MC table and introduce support for multi-chip devices SPI NOR manufacturer drivers changes: * macronix: add support for mx25uw51245g with RWW * spansion: - determine current address mode at runtime as it can be changed in a non-volatile way and differ from factory defaults or from what SFDP advertises. - enable JFFS2 write buffer mode for few ECC'd NOR flashes: S25FS256T, s25hx and s28hx - add support for s25hl02gt and s25hs02gt Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2023-03-22mtd: Use of_property_read_bool() for boolean propertiesRob Herring1-1/+1
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230310144716.1543995-1-robh@kernel.org
2023-03-09mtd: maps: pismo: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Acked-by: Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/lkml/20221118224540.619276-497-uwe@kleine-koenig.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-11-24mtd: maps: pxa2xx-flash: fix memory leak in probeZheng Yongjun1-0/+2
Free 'info' upon remapping error to avoid a memory leak. Fixes: e644f7d62894 ("[MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver") Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> [<miquel.raynal@bootlin.com>: Reword the commit log] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20221119073307.22929-1-zhengyongjun3@huawei.com
2022-10-07Merge tag 'mtd/for-6.1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "Core MTD changes: - mtdchar: add MEMREAD ioctl - Add ECC error accounting for each read request - always initialize 'stats' in struct mtd_oob_ops - Track maximum number of bitflips for each read request - Fix repeated word in comment - Move from strlcpy with unused retval to strscpy - Fix a typo in a comment - Add binding for U-Boot bootloader partitions MTD device drivers changes: - FTL: use container_of() rather than cast - docg3: - Use correct function names in comment blocks - Check the return value of devm_ioremap() in the probe - physmap-core: Fix NULL pointer dereferencing in of_select_probe_type() - parsers: add Broadcom's U-Boot parser Raw NAND core changes: - Replace of_gpio_named_count() by gpiod_count() - Remove misguided comment of nand_get_device() - bbt: Use the bitmap API to allocate bitmaps Raw NAND controller drivers changes: - Meson: - Stop supporting legacy clocks - Refine resource getting in probe - Convert bindings to yaml - Fix clock handling and update the bindings accordingly - Fix bit map use in meson_nfc_ecc_correct() - bcm47xx: - Fix spelling typo in comment - STM32 FMC2: - Switch to using devm_fwnode_gpiod_get() - Fix dma_map_sg error check - Cadence: - Remove an unneeded result variable - Marvell: - Fix error handle regarding dma_map_sg - Orion: - Use devm_clk_get_optional() - Cafe: - Use correct function name in comment block - Atmel: - Unmap streaming DMA mappings - Arasan: - Stop using 0 as NULL pointer - GPMI: - Fix typo 'the the' in comment - BRCM: - Add individual glue driver selection - Move Kconfig to driver folder - FSL: Fix none ECC mode - Intel: - Use devm_platform_ioremap_resource_byname() - Remove unused clk_rate member from struct ebu_nand - Remove unused nand_pa member from ebu_nand_cs - Don't re-define NAND_DATA_IFACE_CHECK_ONLY - Remove undocumented compatible string - Fix compatible string in the bindings - Read the chip-select line from the correct OF node - Fix maximum chip select value in the bindings" * tag 'mtd/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (43 commits) mtd: rawnand: meson: stop supporting legacy clocks dt-bindings: nand: meson: convert txt to yaml mtd: rawnand: meson: refine resource getting in probe mtd: rawnand: meson: fix the clock dt-bindings: nand: meson: fix meson nfc clock mtd: rawnand: bcm47xx: fix spelling typo in comment mtd: rawnand: stm32_fmc2: switch to using devm_fwnode_gpiod_get() mtd: rawnand: cadence: Remove an unneeded result variable mtd: rawnand: Replace of_gpio_named_count() by gpiod_count() mtd: rawnand: marvell: Fix error handle regarding dma_map_sg mtd: rawnand: stm32_fmc2: Fix dma_map_sg error check mtd: rawnand: remove misguided comment of nand_get_device() mtd: rawnand: orion: Use devm_clk_get_optional() mtd: rawnand: cafe: Use correct function name in comment block mtd: rawnand: atmel: Unmap streaming DMA mappings mtd: rawnand: meson: fix bit map use in meson_nfc_ecc_correct() mtd: rawnand: arasan: stop using 0 as NULL pointer mtd: rawnand: gpmi: Fix typo 'the the' in comment mtd: rawnand: brcmnand: Add individual glue driver selection mtd: rawnand: brcmnand: Move Kconfig to driver folder ...
2022-09-19mtd: physmap-core: Fix NULL pointer dereferencing in of_select_probe_type()Zeng Jingxiang1-0/+3
Coverity complains of a possible NULL dereference: in of_select_probe_type(): 1. returned_null: of_match_device() returns NULL. 2. var_assigned: match = NULL return value from of_match_device() 309 match = of_match_device(of_flash_match, &dev->dev); 3.dereference: Dereferencing the NULL pointer match. 310 probe_type = match->data; Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220727060302.1560325-1-zengjx95@gmail.com
2022-08-16i2c: Make remove callback return voidUwe Kleine-König1-3/+1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-09mtd: physmap: Drop if with an always false conditionUwe Kleine-König1-4/+0
The remove callback is only called after probe completed successfully. In this case platform_set_drvdata() was called with a non-NULL argument and so info is never NULL. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220603210758.148493-15-u.kleine-koenig@pengutronix.de
2022-06-09mtd: physmap: Don't skip cleanup after mtd_device_unregister() failedUwe Kleine-König1-6/+3
If mtd_device_unregister() fails (which it doesn't when used correctly), the resources bound by the nand chip should be freed anyhow as returning an error value doesn't prevent the device getting unbound. Instead use WARN_ON on the return value similar to how other drivers do it. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220603210758.148493-14-u.kleine-koenig@pengutronix.de
2022-06-06mtd: maps: Fix refcount leak in ap_flash_initMiaoqian Lin1-0/+1
of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: b0afd44bc192 ("mtd: physmap_of: add a hook for Versatile write protection") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220523143255.4376-1-linmq006@gmail.com
2022-06-06mtd: maps: Fix refcount leak in of_flash_probe_versatileMiaoqian Lin1-0/+1
of_find_matching_node_and_match() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: b0afd44bc192 ("mtd: physmap_of: add a hook for Versatile write protection") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220523140205.48625-1-linmq006@gmail.com
2022-06-02Merge tag 'arm-multiplatform-5.19-2' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...
2022-04-25mtd: maps: ixp4xx: Drop driverLinus Walleij3-272/+0
This custom maps driver was never used with the device tree enabled IXP4xx systems, which use the physmap add-on from commit 2aba2f2a704d ("mtd: physmap_of: add a hook for Intel IXP4xx flash probing") Since kernel v5.18-rc1 IXP4xx is only booting from the device tree so drop this old driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220407210844.2489682-1-linus.walleij@linaro.org
2022-04-19ARM: pxa: split up mach/hardware.hArnd Bergmann1-2/+0
The mach/hardware.h is included in lots of places, and it provides three different things on pxa: - the cpu_is_pxa* macros - an indirect inclusion of mach/addr-map.h - the __REG() and io_pv2() helper macros Split it up into separate <linux/soc/pxa/cpu.h> and mach/pxa-regs.h headers, then change all the files that use mach/hardware.h to include the exact set of those three headers that they actually need, allowing for further more targeted cleanup. linux/soc/pxa/cpu.h can remain permanently exported and is now in a global location along with similar headers. pxa-regs.h and addr-map.h are only used in a very small number of drivers now and can be moved to arch/arm/mach-pxa/ directly when those drivers are to pass the necessary data as resources. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-rtc@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-01-02MIPS: TXX9: Remove rbtx4939 board supportThomas Bogendoerfer3-140/+0
No active MIPS user own this board, so let's remove it. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-10-15mtd: fixup CFI on ixp4xxArnd Bergmann1-1/+1
drivers/mtd/maps/ixp4xx.c requires MTD_CFI_BE_BYTE_SWAP to be set in order to compile. drivers/mtd/maps/ixp4xx.c:57:4: error: #error CONFIG_MTD_CFI_BE_BYTE_SWAP required This patch avoids the #error output by enforcing the policy in Kconfig. Not sure if this is the right approach, but it helps doing randconfig builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210927141045.1597593-1-arnd@kernel.org
2021-08-17mtd: maps: remove dead MTD map driver for PMC-Sierra MSP boardsLukas Bulwahn3-251/+0
Commit 1b00767fd8e1 ("MIPS: Remove PMC MSP71xx platform") removes the config PMC_MSP in ./arch/mips/Kconfig. Hence, since then, the corresponding MTD map driver for PMC-Sierra MSP boards is dead code. Remove this dead driver. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210817104531.12675-1-lukas.bulwahn@gmail.com
2021-06-11mtd: amd76xrom: remove unnecessary oom messageZhen Lei1-4/+2
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210610022631.15344-1-thunder.leizhen@huawei.com
2021-06-11mtd: ck804xrom: remove unnecessary oom messageZhen Lei1-5/+3
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210610022416.15291-1-thunder.leizhen@huawei.com
2021-06-11mtd: esb2rom: remove unnecessary oom messageZhen Lei1-4/+3
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210610022239.15238-1-thunder.leizhen@huawei.com
2021-06-11mtd: ichxrom: remove unnecessary oom messageZhen Lei1-4/+2
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210610022100.15185-1-thunder.leizhen@huawei.com
2021-06-11mtd: sun_uflash: remove unnecessary oom messageZhen Lei1-3/+1
Fixes scripts/checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Remove it can help us save a bit of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210610021400.15132-1-thunder.leizhen@huawei.com
2021-05-10mtd: plat-ram: remove redundant dev_err call in platram_probe()Yu Kuai1-1/+0
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210408111514.1011020-3-yukuai3@huawei.com
2021-04-26Merge tag 'mtd/for-5.13' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd updates from Miquel Raynal: "MTD core: - Handle possible -EPROBE_DEFER from parse_mtd_partitions() - Constify buf in mtd_write_user_prot_reg() - Constify name param in mtd_bdi_init - Fix fall-through warnings for Clang - Get rid of Big MTD Lock ouf of mtdchar - Drop mtd_mutex usage from mtdchar_open() - Don't lock when recursively deleting partitions - Use module_mtd_blktrans() to register driver when relevant - Parse MTD as NVMEM cells - New OTP (one-time-programmable) erase ioctl - Require write permissions for locking and badblock ioctls - physmap: - Fix error return code of physmap_flash_remove() - physmap-bt1-rom: Fix unintentional stack access - ofpart parser: - Support Linksys Northstar partitions - Make symbol 'bcm4908_partitions_quirks' static - Limit parsing of deprecated DT syntax - Support BCM4908 fixed partitions - Qcom parser: - Incompatible with spi-nor 4k sectors - Fix error condition - Extend Qcom SMEM parser to SPI flash CFI: - Disable broken buffered writes for CFI chips within ID 0x2201 - Address a Coverity report for unused value SPI NOR core: - Add OTP support - Fix module unload while an op in progress - Add various cleanup patches - Add Michael and Pratyush as designated reviewers in MAINTAINERS SPI NOR controller drivers: - intel-spi: - Move platform data header to x86 subfolder NAND core: - Fix error handling in nand_prog_page_op() (x2) - Add a helper to retrieve the number of ECC bytes per step - Add a helper to retrieve the number of ECC steps - Let ECC engines advertize the exact number of steps - ECC Hamming: - Populate the public nsteps field - Use the public nsteps field - ECC BCH: - Populate the public nsteps field - Use the public nsteps field Raw NAND core: - Add support for secure regions in NAND memory - Try not to use the ECC private structures - Remove duplicate include in rawnand.h - BBT: - Skip bad blocks when searching for the BBT in NAND (APPLIED THEN REVERTED) Raw NAND controller drivers: - Qcom: - Convert bindings to YAML - Use dma_mapping_error() for error check - Add missing nand_cleanup() in error path - Return actual error code instead of -ENODEV - Update last code word register - Add helper to configure location register - Rename parameter name in macro - Add helper to check last code word - Convert nandc to chip in Read/Write helper - Update register macro name for 0x2c offset - GPMI: - Fix a double free in gpmi_nand_init - Rockchip: - Use flexible-array member instead of zero-length array - Atmel: - Update ecc_stats.corrected counter - MXC: - Remove unneeded of_match_ptr() - R852: - replace spin_lock_irqsave by spin_lock in hard IRQ - Brcmnand: - Move to polling in pio mode on oops write - Read/write oob during EDU transfer - Fix OOB R/W with Hamming ECC - FSMC: - Fix error code in fsmc_nand_probe() - OMAP: - Use ECC information from the generic structures SPI-NAND core: - Add missing MODULE_DEVICE_TABLE() SPI-NAND drivers: - gigadevice: Support GD5F1GQ5UExxG" * tag 'mtd/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (89 commits) Revert "mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND" mtd: core: Constify buf in mtd_write_user_prot_reg() Revert "mtd: spi-nor: macronix: Add support for mx25l51245g" mtd: spi-nor: core: Fix an issue of releasing resources during read/write mtd: cfi_cmdset_0002: remove redundant assignment to variable timeo mtd: cfi_cmdset_0002: Disable buffered writes for AMD chip 0x2201 mtd: rawnand: qcom: Use dma_mapping_error() for error check mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init mtd: rawnand: qcom: Add missing nand_cleanup() in error path mtd: rawnand: Add support for secure regions in NAND memory dt-bindings: mtd: Add a property to declare secure regions in NAND chips dt-bindings: mtd: Convert Qcom NANDc binding to YAML mtd: spi-nor: winbond: add OTP support to w25q32fw/jw mtd: spi-nor: implement OTP support for Winbond and similar flashes mtd: spi-nor: add OTP support mtd: spi-nor: swp: Improve code around spi_nor_check_lock_status_sr() mtd: spi-nor: Move Software Write Protection logic out of the core mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND include: linux: mtd: Remove duplicate include of nand.h mtd: parsers: ofpart: support Linksys Northstar partitions ...
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky1-1/+0
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-11mtd: maps: fix error return code of physmap_flash_remove()Jia-Ju Bai1-1/+3
When platform_get_drvdata() returns NULL to info, no error return code of physmap_flash_remove() is assigned. To fix this bug, err is assigned with -EINVAL in this case Fixes: 73566edf9b91 ("[MTD] Convert physmap to platform driver") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210308034446.3052-1-baijiaju1990@gmail.com
2021-03-11mtd: physmap: physmap-bt1-rom: Fix unintentional stack accessGustavo A. R. Silva1-1/+1
Cast &data to (char *) in order to avoid unintentionally accessing the stack. Notice that data is of type u32, so any increment to &data will be in the order of 4-byte chunks, and this piece of code is actually intended to be a byte offset. Fixes: b3e79e7682e0 ("mtd: physmap: Add Baikal-T1 physically mapped ROM support") Addresses-Coverity-ID: 1497765 ("Out-of-bounds access") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210212104022.GA242669@embeddedor
2021-02-01mtd: convert comma to semicolonZheng Yongjun1-4/+4
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210108092300.18909-1-zhengyongjun3@huawei.com
2020-12-16Merge tags 'spi-nor/for-5.11' and 'nand/for-5.11' into mtd/nextMiquel Raynal1-3/+8
SPI NOR core changes: - Initial support for stateful Octal DTR mode using volatile settings - Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards - Support for Cypress Semper flash - Support to specify ECC block size of SPI NOR flashes - Fixes to avoid clearing of non-volatile Block Protection bits at probe Generic NAND core: * ECC management: - Add an I/O request tweaking mechanism - Entire rework of the software BCH ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, migration to more generic prototypes, misc fixes and style cleanup. Moved now to the Generic NAND layer. - Entire rework of the software Hamming ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, misc renames, comment updates, cleanup, and style fixes. Moved now to the generic NAND layer. - Necessary plumbing at the NAND level to retrieve generic NAND ECC engines (softwares and on-die). - Update of the bindings. Raw NAND core: * Geting rid of the chip->ecc.priv entry. * Fix miscellaneous typos in kernel-doc Raw NAND controller drivers: * AU1550: Ensure the presence of the right includes * Davinci: Do not use extra dereferencing * GPMI: - Fix the driver only sense CS0 R/B issue - Fix the random DMA timeout issue - Use a single line for of_device_id - Use of_device_get_match_data() - Fix reference count leak in gpmi ops - Cleanup makefile - Fix binding matching of clocks on different SoCs * Ingenic: remove redundant get_device() in ingenic_ecc_get() * Intel LGM: New NAND controller driver * Marvell: Drop useless line * Meson: - Fix a resource leak in init - Fix meson_nfc_dma_buffer_release() arguments * mxc: - Use device_get_match_data() - Use a single line for of_device_id - Remove platform data support * Qcom: - Add support for SDX55 - Support for IPQ6018 QPIC NAND controller - Fix DMA sync on FLASH_STATUS register read * Rockchip: New NAND controller driver for RK3308, RK2928 and others * Sunxi: Add MDMA support SPI-NAND core: * Creation of a SPI-NAND on-die ECC engine * Move ECC related definitions earlier in the driver * Fix typo in comment * Fill a default ECC provider/algorithm * Remove outdated comment * Fix OOB read * Allow the case where there is no ECC engine * Use the external ECC engine logic SPI-NAND chip drivers: * Micron: - Add support for MT29F2G01AAAED - Use more specific names * Macronix: - Add support for MX35LFxG24AD - Add support for MX35LFxGE4AD Others: * onenand: Use mtd->oops_panic_write as condition * plat-ram: correctly free memory on error path in platram_probe()
2020-12-10mtd: plat-ram: correctly free memory on error path in platram_probe()Baskov Evgeiny1-3/+8
If an error happens in mtd_device_parse_register or mtd_device_register, memory allocated for struct platram_info is leaked. Make platram_probe() call platram_remove() on all error paths after struct platram_info allocation to correctly free resources. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Baskov Evgeiny <baskov@ispras.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201113160537.899-1-baskov@ispras.ru
2020-12-07mtd: physmap: physmap-bt1-rom: Fix __iomem addrspace removal warningSerge Semin1-4/+4
sparse is unhappy with us casting the __iomem address space pointer to a type with no address space attribute specified: "sparse warnings: (new ones prefixed by >>)" >> drivers/mtd/maps/physmap-bt1-rom.c:78:18: sparse: sparse: cast removes address space '__iomem' of expression Indeed we perform the __iomem-less type casting but to an integer variable. The integer variable isn't dereferenced then, so the casting is safe and won't cause any problem. But in order to make sparse happy and keep the code coherent let's fix the warning by converting the local "shift" and "chunk" variables to the "unsigned int" type (since their value won't ever exceed three) and cast the __iomem-pointers to uintptr_t. Add the same fix to the bt1_rom_map_read() method for unification. Fixes: b3e79e7682e0 ("mtd: physmap: Add Baikal-T1 physically mapped ROM support") Link: https://lore.kernel.org/lkml/202011021254.XC70BaQT-lkp@intel.com/ Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reported-by: kernel test robot <lkp@intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201125072640.23516-1-Sergey.Semin@baikalelectronics.ru
2020-10-02mtd: maps: vmu-flash: fix typos for struct memcardBernard Zhao1-2/+2
Change struct memcard`s element "removeable" -> "removable". Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200922112814.26761-1-bernard@vivo.com
2020-10-02mtd: physmap: Add Baikal-T1 physically mapped ROM supportSerge Semin5-0/+160
Baikal-T1 Boot Controller provides an access to a RO storages, which are physically mapped into the SoC MMIO space. In particularly there are Internal ROM embedded into the SoC with a pre-installed firmware, externally attached SPI flash (also accessed in the read-only mode) and a memory region, which mirrors one of them in accordance with the currently enabled system boot mode (also called Boot ROM). This commit adds the Internal ROM support to the physmap driver of the MTD kernel subsystem. The driver will create the Internal ROM MTD as long as it is defined in the system dts file. The physically mapped SPI flash region will be used to implement the SPI-mem interface. The mirroring memory region won't be accessible directly since it's redundant due to both bootable regions being exposed anyway. Note we had to create a dedicated code for the ROMs since read from the corresponding memory regions must be done via the dword-aligned addresses. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Cc: Lee Jones <lee.jones@linaro.org> Cc: linux-mips@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200920111445.21816-1-Sergey.Semin@baikalelectronics.ru
2020-10-02mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmuLiu Shixin1-6/+1
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200919100854.1639267-1-liushixin2@huawei.com
2020-08-27mtd: maps: physmap: Retain mtd-name property from dtsChris Packham1-1/+2
In physmap_flash_of_init() the maps[].name can be populated based on the optional 'linux,mtd-name' property in the dts. Make sure this is retained when filling in the rest of the map[] data. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200824025744.25992-1-chris.packham@alliedtelesis.co.nz
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 20:12:56 +0000