summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2014-11-25mfd: dln2: add support for USB-SPI moduleLaurentiu Palcu1-0/+12
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
2014-11-25mfd: wm5110: Add missing registers for AIF2 channels 3-6Charles Keepax1-0/+16
When the extra 4 channels were added to AIF2 the necessary frame control registers were not given defaults and marked readable. This patch fixes this. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-11-25mfd: tc3589x: get rid of static baseLinus Walleij1-6/+3
The TC3589x driver is now a device tree-only driver, so we want only dynamic IRQs and GPIO numbers from the tc3589x, no static assignments. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-11-25mfd: arizona: Document HP_CTRL_1L and HP_CTRL_1R registersCharles Keepax3-2/+12
These registers are documented in the datasheet and used as part of the extcon driver. Expose them properly through regmap as the datasheet notes they should be treated as volatile do so. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-11-25mfd: wm8997: Mark INTERRUPT_STATUS_2_MASK as readableCharles Keepax1-0/+2
Technically this register is not used on wm8997 however the regmap core requires a continuous block of IRQs. The simplest solution is just to add the register. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-11-25mfd: tc6393xb: Prepare/unprepare clocksDmitry Eremin-Solenikov1-5/+5
Change clk_enable/disable() calls to clk_prepare_enable() and clk_disable_unrepapre(). Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: tps65090: Fix bonkers indenting strategyLee Jones1-31/+31
First spotted pointless (incorrect) indent of 'if (ret)', then double indentations of a struct attribute 'mask'. Decided to go through the whole file and make amendments instead and this is the result. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: tc6393xb: Fail ohci suspend if full state restore is requiredDmitry Eremin-Solenikov1-1/+12
Some boards with TC6393XB chip require full state restore during system resume thanks to chip's VCC being cut off during suspend (Sharp SL-6000 tosa is one of them). Failing to do so would result in ohci Oops on resume due to internal memory contentes being changed. Fail ohci suspend on tc6393xb is full state restore is required. Recommended workaround is to unbind tmio-ohci driver before suspend and rebind it after resume. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: lpc_sch: Don't call mfd_remove_devices()Andy Shevchenko1-5/+1
MFD core already cares about failing registration. It will remove successfully registered devices in case of error. Thus, no need to repeatedly call mfd_remove_devices(). Fixes: 5829e9b64e65 (mfd: lpc_sch: Accomodate partial population of the MFD devices) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: wm8350-core: Fix probable mask then right shift defectJoe Perches1-1/+1
Precedence of & and >> is not the same and is not left to right. shift has higher precedence and should be done after the mask. Add parentheses around the mask. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: ab8500-sysctrl: Drop ab8500_restartGuenter Roeck1-57/+0
ab8500_restart is not called from anywhere in the kernel, so drop it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: db8500-prcmu: Provide sane error path valuesLee Jones1-11/+8
Also rid superfluous gotos and label. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: db8500-prcmu: Check return of devm_ioremap for errorPramod Gurav1-0/+5
Error check around return value of devm_ioremap is missing. Add the same to avoid NULL pointer dereference. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: twl4030-power: Fix regression with missing compatible flagTony Lindgren1-0/+3
Commit e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration") accidentally removed the compatible flag for "ti,twl4030-power" that should be there as documented in the binding. If "ti,twl4030-power" only the poweroff configuration is done by the driver. Fixes: e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration") Cc: stable@vger.kernel.org # v3.16+ Reported-by: "Dr. H. Nikolaus Schaller" <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: rtsx: Fix PM suspend for 5227 & 5249Micky Ching5-1/+51
Fix rts5227&5249 failed send buffer cmd after suspend, PM_CTRL3 should reset before send any buffer cmd after suspend. Otherwise, buffer cmd will failed, this will lead resume fail. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25Revert "mfd: sec-core: Prepare regulators for suspend state to reduce ↵Javier Martinez Canillas2-11/+0
power-consumption" This reverts commit b7cde7078d2344073c310aa65fc2b0a845d2cb5b ("mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption") Commit b7cde7078d23 called regulator_suspend_prepare() to prepare the regulators for a suspend state. But it did from the device pm suspend handler while the regulator suspend prepare function iterates over all regulators and not only the one managed by this device so it doesn't seems to be correct to call it from within a device driver. It is better to call the regulator suspend prepare/finish functions from platform code instead so this patch reverts the mentioned commit. Suggested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: max77693: Map charger device to its own of_nodeKrzysztof Kozlowski1-1/+4
Add a "maxim,max77693-charger" of_compatible to the mfd_cell so the MFD child device (the charger) will have its own of_node set. This will be used by the max77693 charger driver in next patches to obtain battery configuration from DTS. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: arizona-spi: Add lines after declarations - checkpatch catchWill Sheppard1-0/+2
This was found whilst running checkpatch.pl on arizona-spi. WARNING: Missing a blank line after declarations + struct arizona *arizona = spi_get_drvdata(spi); + arizona_dev_exit(arizona); Signed-off-by: Will Sheppard <wsheppard@embedded-bits.co.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: Add atmel-hlcdc driverBoris Brezillon3-0/+129
The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5 family or sama5d3 family) exposes 2 subdevices: - a display controller (controlled by a DRM driver) - a PWM chip The MFD device provides a regmap and several clocks (those connected to this hardware block) to its subdevices. This way concurrent accesses to the iomem range are handled by the regmap framework, and each subdevice can safely access HLCDC registers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: core: Fix platform-device id generationJohan Hovold1-1/+7
Make sure to always honour multi-function devices registered with PLATFORM_DEVID_NONE (-1) or PLATFORM_DEVID_AUTO (-2) as id base. In this case it does not make sense to append the cell id to the mfd-id base and potentially change the requested behaviour. Specifically this will allow multi-function devices to be registered with PLATFORM_DEVID_AUTO while still having non-zero cell ids. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: Use mfd_add_hotplug_devices() helperJohan Hovold2-4/+4
Use mfd_add_hotplug_devices helper to register the subdevices. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: syscon: Decouple syscon interface from platform devicesPankaj Dubey1-22/+74
Currently a syscon entity can be only registered directly through a platform device that binds to a dedicated syscon driver. However in certain use cases it is desirable to make a device used with another driver a syscon interface provider. For example, certain SoCs (e.g. Exynos) contain system controller blocks which perform various functions such as power domain control, CPU power management, low power mode control, but in addition contain certain IP integration glue, such as various signal masks, coprocessor power control, etc. In such case, there is a need to have a dedicated driver for such system controller but also share registers with other drivers. The latter is where the syscon interface is helpful. In case of DT based platforms, this patch decouples syscon object from syscon platform driver, and allows to create syscon objects first time when it is required by calling of syscon_regmap_lookup_by APIs and keep a list of such syscon objects along with syscon provider device_nodes and regmap handles. For non-DT based platforms, this patch keeps syscon platform driver structure so that syscon can be probed and such non-DT based drivers can use syscon_regmap_lookup_by_pdev API and access regmap handles. Once all users of "syscon_regmap_lookup_by_pdev" migrated to DT based, we can completely remove platform driver of syscon, and keep only helper functions to get regmap handles. Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Tomasz Figa <tomasz.figa@gmail.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: max77693: Add haptic of_compatible in mfd_cellJaewon Kim1-1/+4
This patch add haptic of_compatible in order to use the haptic device driver using Devicetree. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: max77693: Initialize haptic register mapJaewon Kim1-3/+18
This patch add regmap_haptic initialization to use haptic register map in haptic device driver. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: tps65217: Add compatible string for subdevicesJohannes Pointner1-0/+2
Adds of_compatible strings to mfd_cells for sub devices of the tps65217. Signed-off-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25Merge branches 'ib-mfd-gpio-i2c-3.19', 'ib-mfd-iio-3.19' and ↵Lee Jones6-62/+1134
'ib-mfd-regulator-v3.19', tag 'ib-mfd-regulator-clk-v3.19' into ibs-for-mfd-merged Immutable branch between MFD, Regulator and Clk, due for v3.19
2014-11-25regulator: s2mps11: Add support S2MPS13 regulator deviceChanwoo Choi1-0/+13
This patch adds S2MPS13 regulator device to existing S2MPS11 device driver. The S2MPS13 has just different number of regulators from S2MPS14. The S2MPS13 regulator device includes LDO[1-40] and BUCK[1-10]. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: sec-core: Add support for S2MPS13 deviceChanwoo Choi2-6/+33
This patch adds the support for Samsung S2MPS13 PMIC device to the sec-core MFD driver. The S2MPS13 is very similar with existing S2MPS14 and includes PMIC/ RTC/CLOCK devices. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25Merge branch 'ib-mfd-iio-3.19' of ↵Rafael J. Wysocki2-56/+308
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into acpi-pmic Pull MFD changes that the ACPI PMIC changes depend on from Lee Jones.
2014-11-24Merge tag 'v3.18-rc6' into devicetree/nextGrant Likely5-4/+71
v3.18-rc6 contains an important DT bug fix, c1a2086e2d, "of/selftest: Fix off-by-one error in removal path" which affects testing of the overlay patch series. Merge it into the devicetree/next staging branch so that the overlay patches are applied on top of a known working tree. Linux 3.18-rc6 Conflicts: drivers/of/address.c
2014-11-19mfd: dln2: A couple endian fixesDan Carpenter1-3/+5
Sparse catches a couple endian bugs. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-19mfd: dln2: Add a limit check for invalid echoOctavian Purdila1-0/+4
The echo field in dln2_transfer_complete comes directly from an USB transfer and we should not trust it is valid. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-19mfd: dln2: Fix _dln2_transfer return codeOctavian Purdila1-3/+3
If wait_for_completion_interruptible_timeout returns a positive value it may be propagated as the return value of _dln2_transfer. This contradicts the documentation of the function and exposes unnecessary internals to the callers. This patch makes sure to set the return value to 0 in that case. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-18mfd/axp20x: avoid irq numbering collisionJacob Pan1-9/+9
IRQ numbers in axp20x devices are defined with high-order bit first in each IRQ enable/status registers. On Intel platforms it is more common to number IRQs with least significant bit first. Therefore, sharing IRQ# between the two is very difficult. Since AXP288 is a customized PMIC for Intel platform and the amount of shared IRQs are very small, we use separate IRQ numbering. This also fixes collision and a duplicate in WBTO interrupt. e.g. For the 16 interrupts controlled in IRQ enabled registers 1 & 2, on axp20x for ARM, the PMIC local IRQ numbers and register bits are mapped as: IRQ#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 --------------------------------------------------------- ARM: 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 Intel: 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-10mfd: Add support for Diolan DLN-2 devicesOctavian Purdila3-0/+774
This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO Master Adapter DLN-2. Details about the device can be found here: https://www.diolan.com/i2c/i2c_interface.html. Information about the USB protocol can be found in the Programmer's Reference Manual [1], see section 1.7. Because the hardware has a single transmit endpoint and a single receive endpoint the communication between the various DLN2 drivers and the hardware will be muxed/demuxed by this driver. Each DLN2 module will be identified by the handle field within the DLN2 message header. If a DLN2 module issues multiple commands in parallel they will be identified by the echo counter field in the message header. The DLN2 modules can use the dln2_transfer() function to issue a command and wait for its response. They can also register a callback that is going to be called when a specific event id is generated by the device (e.g. GPIO interrupts). The device uses handle 0 for sending events. [1] https://www.diolan.com/downloads/dln-api-manual.pdf Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-10mfd: twl4030-power: Fix poweroff with PM configuration enabledTony Lindgren1-0/+52
Commit e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration") enabled configuring the PM features for twl4030. This caused poweroff command to fail on devices that have the BCI charger on twl4030 wired, or have power wired for VBUS. Instead of powering off, the device reboots. This is because voltage is detected on charger or VBUS with the default bits enabled for the power transition registers. To fix the issue, let's just clear VBUS and CHG bits as we want poweroff command to keep the system powered off. Fixes: e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration") Cc: stable@vger.kernel.org # v3.16+ Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-10mfd: max77693: Fix always masked MUIC interruptsKrzysztof Kozlowski1-0/+12
All interrupts coming from MUIC were ignored because interrupt source register was masked. The Maxim 77693 has a "interrupt source" - a separate register and interrupts which give information about PMIC block triggering the individual interrupt (charger, topsys, MUIC, flash LED). By default bootloader could initialize this register to "mask all" value. In such case (observed on Trats2 board) MUIC interrupts won't be generated regardless of their mask status. Regmap irq chip was unmasking individual MUIC interrupts but the source was masked Before introducing regmap irq chip this interrupt source was unmasked, read and acked. Reading and acking is not necessary but unmasking is. Fixes: 342d669c1ee4 ("mfd: max77693: Handle IRQs using regmap") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-10mfd: max77693: Use proper regmap for handling MUIC interruptsKrzysztof Kozlowski1-1/+1
Interrupts coming from Maxim77693 MUIC block (MicroUSB Interface Controller) were not handled at all because wrong regmap was used for MUIC's regmap_irq_chip. The MUIC component of Maxim 77693 uses different I2C address thus second regmap is created and used by max77693 extcon driver. The registers for MUIC interrupts are also in that block and should be handled by that second regmap. However the regmap irq chip for MUIC was configured with default regmap which could not read MUIC registers. Fixes: 342d669c1ee4 ("mfd: max77693: Handle IRQs using regmap") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-10mfd: viperboard: Fix platform-device id collisionJohan Hovold1-2/+3
Allow more than one viperboard to be connected by registering with PLATFORM_DEVID_AUTO instead of PLATFORM_DEVID_NONE. The subdevices are currently registered with PLATFORM_DEVID_NONE, which will cause a name collision on the platform bus when a second viperboard is plugged in: viperboard 1-2.4:1.0: version 0.00 found at bus 001 address 004 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 181 at /home/johan/work/omicron/src/linux/fs/sysfs/dir.c:31 sysfs_warn_dup+0x74/0x84() sysfs: cannot create duplicate filename '/bus/platform/devices/viperboard-gpio' Modules linked in: i2c_viperboard viperboard netconsole [last unloaded: viperboard] CPU: 0 PID: 181 Comm: bash Tainted: G W 3.17.0-rc6 #1 [<c0016bf4>] (unwind_backtrace) from [<c0013860>] (show_stack+0x20/0x24) [<c0013860>] (show_stack) from [<c04305f8>] (dump_stack+0x24/0x28) [<c04305f8>] (dump_stack) from [<c0040fb4>] (warn_slowpath_common+0x80/0x98) [<c0040fb4>] (warn_slowpath_common) from [<c004100c>] (warn_slowpath_fmt+0x40/0x48) [<c004100c>] (warn_slowpath_fmt) from [<c016f1bc>] (sysfs_warn_dup+0x74/0x84) [<c016f1bc>] (sysfs_warn_dup) from [<c016f548>] (sysfs_do_create_link_sd.isra.2+0xcc/0xd0) [<c016f548>] (sysfs_do_create_link_sd.isra.2) from [<c016f588>] (sysfs_create_link+0x3c/0x48) [<c016f588>] (sysfs_create_link) from [<c02867ec>] (bus_add_device+0x12c/0x1e0) [<c02867ec>] (bus_add_device) from [<c0284820>] (device_add+0x410/0x584) [<c0284820>] (device_add) from [<c0289440>] (platform_device_add+0xd8/0x26c) [<c0289440>] (platform_device_add) from [<c02a5ae4>] (mfd_add_device+0x240/0x344) [<c02a5ae4>] (mfd_add_device) from [<c02a5ce0>] (mfd_add_devices+0xb8/0x110) [<c02a5ce0>] (mfd_add_devices) from [<bf00d1c8>] (vprbrd_probe+0x160/0x1b0 [viperboard]) [<bf00d1c8>] (vprbrd_probe [viperboard]) from [<c030c000>] (usb_probe_interface+0x1bc/0x2a8) [<c030c000>] (usb_probe_interface) from [<c028768c>] (driver_probe_device+0x14c/0x3ac) [<c028768c>] (driver_probe_device) from [<c02879e4>] (__driver_attach+0xa4/0xa8) [<c02879e4>] (__driver_attach) from [<c0285698>] (bus_for_each_dev+0x70/0xa4) [<c0285698>] (bus_for_each_dev) from [<c0287030>] (driver_attach+0x2c/0x30) [<c0287030>] (driver_attach) from [<c030a288>] (usb_store_new_id+0x170/0x1ac) [<c030a288>] (usb_store_new_id) from [<c030a2f8>] (new_id_store+0x34/0x3c) [<c030a2f8>] (new_id_store) from [<c02853ec>] (drv_attr_store+0x30/0x3c) [<c02853ec>] (drv_attr_store) from [<c016eaa8>] (sysfs_kf_write+0x5c/0x60) [<c016eaa8>] (sysfs_kf_write) from [<c016dc68>] (kernfs_fop_write+0xd4/0x194) [<c016dc68>] (kernfs_fop_write) from [<c010fe40>] (vfs_write+0xb4/0x1c0) [<c010fe40>] (vfs_write) from [<c01104a8>] (SyS_write+0x4c/0xa0) [<c01104a8>] (SyS_write) from [<c000f900>] (ret_fast_syscall+0x0/0x48) ---[ end trace 98e8603c22d65817 ]--- viperboard 1-2.4:1.0: Failed to add mfd devices to core. viperboard: probe of 1-2.4:1.0 failed with error -17 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-10mfd: rtsx: Fix build warnings for !PMThierry Reding1-0/+2
rtsx_pci_power_off() is called only from rtsx_pci_suspend(), which isn't built when PM is disabled. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-10mfd: stmpe: Fix STMPE24xx GPMR LSBLinus Walleij1-1/+1
The least significat byte of the GPIO value read register on the STMPE24xx series is on addres 0xA4 not 0xA5. Correct against datasheet and tested on the STMPE2401 hardware. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-04of: Eliminate of_allnodes listGrant Likely1-1/+1
The device tree structure is composed of two lists; the 'allnodes' list which is a singly linked list containing every node in the tree, and the child->parent structure where each parent node has a singly linked list of children. All of the data in the allnodes list can be easily reproduced with the parent-child lists, so of_allnodes is actually unnecessary. Remove it entirely which saves a bit of memory and simplifies the data structure quite a lot. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: Gaurav Minocha <gaurav.minocha.os@gmail.com> Cc: Pantelis Antoniou <pantelis@pantelis.antoniou@konsulko.com>
2014-10-20mfd: drop owner assignment from platform_driversWolfram Sang25-28/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-15Merge tag 'mfd-for-linus-3.18' of ↵Linus Torvalds41-290/+1047
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - DT clean-ups in da9055-core, max14577, rn5t618, arizona, hi6421, stmpe, twl4030 - Export symbols for use in modules in max14577 - Plenty of static code analysis/Coccinelle fixes throughout the SS - Regmap clean-ups in arizona, wm5102, wm5110, da9052, tps65217, rk808 - Remove unused/duplicate code in da9052, 88pm860x, ti_ssp, lpc_sch, arizona - Bug fixes in ti_am335x_tscadc, da9052, ti_am335x_tscadc, rtsx_pcr - IRQ fixups in arizona, stmpe, max14577 - Regulator related changes in axp20x - Pass DMA coherency information from parent => child in MFD core - Rename DT document files for consistency - Add ACPI support to the MFD core - Add Andreas Werner to MAINTAINERS for MEN F21BMC New drivers/supported devices: - New driver for MEN 14F021P00 Board Management Controller - New driver for Ricoh RN5T618 PMIC - New driver for Rockchip RK808 - New driver for HiSilicon Hi6421 PMIC - New driver for Qualcomm SPMI PMICs - Add support for Intel Braswell in lpc_ich - Add support for Intel 9 Series PCH in lpc_ich - Add support for Intel Quark ILB in lpc_sch" [ Delayed to after the poweer/reset pull due to Kconfig problems with recursive Kconfig select/depends-on chains. - Linus ] * tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits) mfd: cros_ec: wait for completion of commands that return IN_PROGRESS i2c: i2c-cros-ec-tunnel: Set retries to 3 mfd: cros_ec: move locking into cros_ec_cmd_xfer mfd: cros_ec: stop calling ->cmd_xfer() directly mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC MAINTAINERS: Adds Andreas Werner to maintainers list for MEN F21BMC mfd: arizona: Correct mask to allow setting micbias external cap mfd: Add ACPI support Revert "mfd: wm5102: Manually apply register patch" mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS mfd: dt-bindings: atmel-gpbr: Rename doc file to conform to naming convention mfd: dt-bindings: qcom-pm8xxx: Rename doc file to conform to naming convention mfd: Inherit coherent_dma_mask from parent device mfd: Document DT bindings for Qualcomm SPMI PMICs mfd: Add support for Qualcomm SPMI PMICs mfd: dt-bindings: pm8xxx: Add new compatible string mfd: axp209x: Drop the parent supplies field mfd: twl4030-power: Use 'ti,system-power-controller' as alternative way to support system power off mfd: dt-bindings: twl4030-power: Use the standard property to mark power control mfd: syscon: Add Atmel GPBR DT bindings documention ...
2014-10-15Merge tag 'for-v3.18' of git://git.infradead.org/battery-2.6Linus Torvalds1-1/+99
Pull power supply and reset updates from Sebastian Reichel: - Initial support for the following chips * max77836 (charger) * max14577 (charger) * bq27742 (battery gauge) * ltc2952 (poweroff) * stih416 (restart) * syscon-reboot (restart) * gpio-restart (restart) - cleanup of power supply core - misc fixes in power supply and reset drivers * tag 'for-v3.18' of git://git.infradead.org/battery-2.6: (48 commits) power: ab8500_fg: Fix build warning Documentation: charger: max14577: Update the date of introducing ABI power: reset: corrections for simple syscon reboot driver Documentation: power: reset: Add documentation for generic SYSCON reboot driver power: reset: Add generic SYSCON register mapped reset bq27x00_battery: Fix flag reading for bq27742 power: reset: use restart_notifier mechanism for msm-poweroff power: Add simple gpio-restart driver power: reset: st: Provide DT bindings for ST's Power Reset driver power: reset: Add restart functionality for STiH41x platforms power: charger-manager: Fix NULL pointer exception with missing cm-fuel-gauge power: max14577: Fix circular config SYSFS dependency power: gpio-charger: do not use gpio value directly power: max8925: Use of_get_child_by_name power: max8925: Fix NULL ptr dereference on memory allocation failure bq27x00_battery: Add support to bq27742 Documentation: charger: max14577: Document exported sysfs entry devicetree: mfd: max14577: Add device tree bindings document power: max17040: Add ID for MAX77836 Fuel Gauge block charger: max14577: Configure battery-dependent settings from DTS and sysfs ... Conflicts: drivers/power/reset/Kconfig drivers/power/reset/Makefile
2014-10-10Merge tag 'hwmon-for-linus-v3.18' of ↵Linus Torvalds3-0/+148
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - new driver for menf21bmc. - convert k10temp, smsc47b397, da9052, da9055 to new hwmon API. - register ntc_thermistor driver with thermal subsystem. - add support for F15h M60h to k10temp driver. - add driver for MEN14F021P00 BMC HWMON driver; this required a merge with tag mfd-hwmon-leds-watchdog-v3.18 * tag 'hwmon-for-linus-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ab8500) Call kernel_power_off instead of pm_power_off hwmon: (menf21bmc) Introduce MEN14F021P00 BMC HWMON driver leds: leds-menf21bmc: Introduce MEN 14F021P00 BMC LED driver watchdog: menf21bmc_wdt: Introduce MEN 14F021P00 BMC Watchdog driver mfd: menf21bmc: Introduce MEN 14F021P00 BMC MFD Core driver hwmon: (ntc_thermistor) Add ntc thermistor to thermal subsystem as a sensor. hwmon: (smsc47b397) Convert to devm_hwmon_device_register_with_groups MAINTAINERS: add entry for the PWM fan driver hwmon: (k10temp) Convert to devm_hwmon_device_register_with_groups hwmon: (k10temp) Add support for F15h M60h hwmon: (da9052) Convert to devm_hwmon_device_register_with_groups hwmon: (da9055) Convert to devm_hwmon_device_register_with_groups hwmon: (ads1015) Use of_property_read_u32 at appropriate places
2014-10-09Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds5-37/+12
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
2014-10-07mfd: axp20x: Extend axp20x to support axp288 pmicJacob Pan2-56/+308
X-Powers AXP288 is a customized PMIC for Intel Baytrail-CR platforms. Similar to AXP202/209, AXP288 comes with USB charger, more LDO and BUCK channels, and AD converters. It also provides extended status and interrupt reporting capabilities than the devices currently supported in axp20x.c. In addition to feature extension, this patch also adds ACPI binding for enumeration. This consolidated driver should support more X-Powers' PMICs in both device tree and ACPI enumerated platforms. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-10-06mfd: cros_ec: wait for completion of commands that return IN_PROGRESSAndrew Bresticker1-0/+33
When an EC command returns EC_RES_IN_PROGRESS, we need to query the state of the EC until it indicates that it is no longer busy. Do this in cros_ec_cmd_xfer() under the EC's mutex so that other commands (e.g. keyboard, I2C passtru) aren't issued to the EC while it is working on the in-progress command. The 10 milliseconds delay and the number of retries are the values that were used by the flashrom tool when retrying commands. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-10-06mfd: cros_ec: move locking into cros_ec_cmd_xferAndrew Bresticker2-12/+9
Now that there's a central cros_ec_cmd_xfer(), move the locking out of the SPI driver. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 07:35:05 +0000