summaryrefslogtreecommitdiff
path: root/drivers/md
AgeCommit message (Collapse)AuthorFilesLines
2017-11-14Merge branch 'linus' of ↵Linus Torvalds2-66/+20
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.15: API: - Disambiguate EBUSY when queueing crypto request by adding ENOSPC. This change touches code outside the crypto API. - Reset settings when empty string is written to rng_current. Algorithms: - Add OSCCA SM3 secure hash. Drivers: - Remove old mv_cesa driver (replaced by marvell/cesa). - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx. - Add ccm/gcm AES in crypto4xx. - Add support for BCM7278 in iproc-rng200. - Add hash support on Exynos in s5p-sss. - Fix fallback-induced error in vmx. - Fix output IV in atmel-aes. - Fix empty GCM hash in mediatek. Others: - Fix DoS potential in lib/mpi. - Fix potential out-of-order issues with padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) lib/mpi: call cond_resched() from mpi_powm() loop crypto: stm32/hash - Fix return issue on update crypto: dh - Remove pointless checks for NULL 'p' and 'g' crypto: qat - Clean up error handling in qat_dh_set_secret() crypto: dh - Don't permit 'key' or 'g' size longer than 'p' crypto: dh - Don't permit 'p' to be 0 crypto: dh - Fix double free of ctx->p hwrng: iproc-rng200 - Add support for BCM7278 dt-bindings: rng: Document BCM7278 RNG200 compatible crypto: chcr - Replace _manual_ swap with swap macro crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[] hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume crypto: atmel - remove empty functions crypto: ecdh - remove empty exit() MAINTAINERS: update maintainer for qat crypto: caam - remove unused param of ctx_map_to_sec4_sg() crypto: caam - remove unneeded edesc zeroization crypto: atmel-aes - Reset the controller before each use crypto: atmel-aes - properly set IV after {en,de}crypt hwrng: core - Reset user selected rng by writing "" to rng_current ...
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar41-0/+41
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-03dm: move dm-verity to generic async completionGilad Ben-Yossef2-66/+20
dm-verity is starting async. crypto ops and waiting for them to complete. Move it over to generic code doing the same. This also avoids a future potential data coruption bug created by the use of wait_for_completion_interruptible() without dealing correctly with an interrupt aborting the wait prior to the async op finishing, should this code ever move to a context where signals are not masked. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> CC: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman41-0/+41
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland9-32/+32
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25locking/atomics, dm-integrity: Convert ACCESS_ONCE() to READ_ONCE()/WRITE_ONCE()Mark Rutland1-7/+8
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't pick up some uses, including those in dm-integrity.c. As a preparatory step, this patch converts the driver to use {READ,WRITE}_ONCE() consistently. At the same time, this patch adds the missing include of <linux/compiler.h> necessary for the {READ,WRITE}_ONCE() definitions. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-1-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-24locking/barriers: Convert users of lockless_dereference() to READ_ONCE()Will Deacon1-10/+10
READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it can be used instead of lockless_dereference() without any change in semantics. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-06Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+2
Pull block fixes from Jens Axboe: "A collection of fixes for this series. This contains: - NVMe pull request from Christoph, one uuid attribute fix, and one fix for the controller memory buffer address for remapped BARs. - use-after-free fix for bsg, from Benjamin Block. - bcache race/use-after-free fix for a list traversal, fixing a regression in this merge window. From Coly Li. - null_blk change configfs dependency change from a 'depends' to a 'select'. This is a change from this merge window as well. From me. - nbd signal fix from Josef, fixing a regression introduced with the status code changes. - nbd MAINTAINERS mailing list entry update. - blk-throttle stall fix from Joseph Qi. - blk-mq-debugfs fix from Omar, fixing an issue where we don't register the IO scheduler debugfs directory, if the driver is loaded with it. Only shows up if you switch through the sysfs interface" * 'for-linus' of git://git.kernel.dk/linux-block: bsg-lib: fix use-after-free under memory-pressure nvme-pci: Use PCI bus address for data/queues in CMB blk-mq-debugfs: fix device sched directory for default scheduler null_blk: change configfs dependency to select blk-throttle: fix possible io stall when upgrade to max MAINTAINERS: update list for NBD nbd: fix -ERESTARTSYS handling nvme: fix visibility of "uuid" ns attribute bcache: use llist_for_each_entry_safe() in __closure_wake_up()
2017-10-05Merge tag 'for-4.14/dm-fixes' of ↵Linus Torvalds5-20/+44
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a stable fix for the alignment of the event number reported at the end of the 'DM_LIST_DEVICES' ioctl. - a couple stable fixes for the DM crypt target. - a DM raid health status reporting fix. * tag 'for-4.14/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm raid: fix incorrect status output at the end of a "recover" process dm crypt: reject sector_size feature if device length is not aligned to it dm crypt: fix memory leak in crypt_ctr_cipher_old() dm ioctl: fix alignment of event number in the device list
2017-10-05dm raid: fix incorrect status output at the end of a "recover" processJonathan Brassow1-5/+6
There are three important fields that indicate the overall health and status of an array: dev_health, sync_ratio, and sync_action. They tell us the condition of the devices in the array, and the degree to which the array is synchronized. This commit fixes a condition that is reported incorrectly. When a member of the array is being rebuilt or a new device is added, the "recover" process is used to synchronize it with the rest of the array. When the process is complete, but the sync thread hasn't yet been reaped, it is possible for the state of MD to be: mddev->recovery = [ MD_RECOVERY_RUNNING MD_RECOVERY_RECOVER MD_RECOVERY_DONE ] curr_resync_completed = <max dev size> (but not MaxSector) and all rdevs to be In_sync. This causes the 'array_in_sync' output parameter that is passed to rs_get_progress() to be computed incorrectly and reported as 'false' -- or not in-sync. This in turn causes the dev_health status characters to be reported as all 'a', rather than the proper 'A'. This can cause erroneous output for several seconds at a time when tools will want to be checking the condition due to events that are raised at the end of a sync process. Fix this by properly calculating the 'array_in_sync' return parameter in rs_get_progress(). Also, remove an unnecessary intermediate 'recovery_cp' variable in rs_get_progress(). Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-10-04dm crypt: reject sector_size feature if device length is not aligned to itMilan Broz1-0/+4
If a crypt mapping uses optional sector_size feature, additional restrictions to mapped device segment size must be applied in constructor, otherwise the device activation will fail later. Fixes: 8f0009a225 ("dm crypt: optionally support larger encryption sector size") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-28dm crypt: fix memory leak in crypt_ctr_cipher_old()Jeffy Chen1-0/+1
Fix memory leak of cipher_api. Fixes: 33d2f09fcb35 (dm crypt: introduce new format of cipher with "capi:" prefix) Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-27md/raid5: cap worker countShaohua Li1-2/+5
static checker reports a potential integer overflow. Cap the worker count to avoid the overflow. Reported:-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-09-27dm-raid: fix a race condition in request handlingShaohua Li1-1/+1
raid_map calls pers->make_request, which missed the suspend check. Fix it with the new md_handle_request API. Fix: cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start()) Cc: Heinz Mauelshagen <heinzm@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-09-27md: fix a race condition for flush request handlingShaohua Li1-4/+10
md_submit_flush_data calls pers->make_request, which missed the suspend check. Fix it with the new md_handle_request API. Reported-by: Nate Dailey <nate.dailey@stratus.com> Tested-by: Nate Dailey <nate.dailey@stratus.com> Fix: cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start()) Cc: stable@vger.kernel.org Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-09-27md: separate request handlingShaohua Li2-25/+34
With commit cc27b0c78c79, pers->make_request could bail out without handling the bio. If that happens, we should retry. The commit fixes md_make_request but not other call sites. Separate the request handling part, so other call sites can use it. Reported-by: Nate Dailey <nate.dailey@stratus.com> Fix: cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start()) Cc: stable@vger.kernel.org Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-09-27bcache: use llist_for_each_entry_safe() in __closure_wake_up()Coly Li1-2/+2
Commit 09b3efec ("bcache: Don't reinvent the wheel but use existing llist API") replaces the following while loop by llist_for_each_entry(), - - while (reverse) { - cl = container_of(reverse, struct closure, list); - reverse = llist_next(reverse); - + llist_for_each_entry(cl, reverse, list) { closure_set_waiting(cl, 0); closure_sub(cl, CLOSURE_WAITING + 1); } This modification introduces a potential race by iterating a corrupted list. Here is how it happens. In the above modification, closure_sub() may wake up a process which is waiting on reverse list. If this process decides to wait again by calling closure_wait(), its cl->list will be added to another wait list. Then when llist_for_each_entry() continues to iterate next node, it will travel on another new wait list which is added in closure_wait(), not the original reverse list in __closure_wake_up(). It is more probably to happen on UP machine because the waked up process may preempt the process which wakes up it. Use llist_for_each_entry_safe() will fix the issue, the safe version fetch next node before waking up a process. Then the copy of next node will make sure list iteration stays on original reverse list. Fixes: 09b3efec81de ("bcache: Don't reinvent the wheel but use existing llist API") Signed-off-by: Coly Li <colyli@suse.de> Reported-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Byungchul Park <byungchul.park@lge.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25dm ioctl: fix alignment of event number in the device listMikulas Patocka3-15/+33
The size of struct dm_name_list is different on 32-bit and 64-bit kernels (so "(nl + 1)" differs between 32-bit and 64-bit kernels). This mismatch caused some harmless difference in padding when using 32-bit or 64-bit kernel. Commit 23d70c5e52dd ("dm ioctl: report event number in DM_LIST_DEVICES") added reporting event number in the output of DM_LIST_DEVICES_CMD. This difference in padding makes it impossible for userspace to determine the location of the event number (the location would be different when running on 32-bit and 64-bit kernels). Fix the padding by using offsetof(struct dm_name_list, name) instead of sizeof(struct dm_name_list) to determine the location of entries. Also, the ioctl version number is incremented to 37 so that userspace can use the version number to determine that the event number is present and correctly located. In addition, a global event is now raised when a DM device is created, removed, renamed or when table is swapped, so that the user can monitor for device changes. Reported-by: Eugene Syromiatnikov <esyr@redhat.com> Fixes: 23d70c5e52dd ("dm ioctl: report event number in DM_LIST_DEVICES") Cc: stable@vger.kernel.org # 4.13 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-19Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds1-3/+10
Pull MD fixes from Shaohua Li: "Two small patches to fix long-lived raid5 stripe batch bugs, one from Dennis and the other from me" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid5: preserve STRIPE_ON_UNPLUG_LIST in break_stripe_batch_list md/raid5: fix a race condition in stripe batch
2017-09-14Merge tag 'for-4.14/dm-changes' of ↵Linus Torvalds18-142/+170
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Some request-based DM core and DM multipath fixes and cleanups - Constify a few variables in DM core and DM integrity - Add bufio optimization and checksum failure accounting to DM integrity - Fix DM integrity to avoid checking integrity of failed reads - Fix DM integrity to use init_completion - A couple DM log-writes target fixes - Simplify DAX flushing by eliminating the unnecessary flush abstraction that was stood up for DM's use. * tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dax: remove the pmem_dax_ops->flush abstraction dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK dm integrity: make blk_integrity_profile structure const dm integrity: do not check integrity for failed read operations dm log writes: fix >512b sectorsize support dm log writes: don't use all the cpu while waiting to log blocks dm ioctl: constify ioctl lookup table dm: constify argument arrays dm integrity: count and display checksum failures dm integrity: optimize writing dm-bufio buffers that are partially changed dm rq: do not update rq partially in each ending bio dm rq: make dm-sq requeuing behavior consistent with dm-mq behavior dm mpath: complain about unsupported __multipath_map_bio() return values dm mpath: avoid that building with W=1 causes gcc 7 to complain about fall-through
2017-09-11dax: remove the pmem_dax_ops->flush abstractionMikulas Patocka3-54/+0
Commit abebfbe2f731 ("dm: add ->flush() dax operation support") is buggy. A DM device may be composed of multiple underlying devices and all of them need to be flushed. That commit just routes the flush request to the first device and ignores the other devices. It could be fixed by adding more complex logic to the device mapper. But there is only one implementation of the method pmem_dax_ops->flush - that is pmem_dax_flush() - and it calls arch_wb_cache_pmem(). Consequently, we don't need the pmem_dax_ops->flush abstraction at all, we can call arch_wb_cache_pmem() directly from dax_flush() because dax_dev->ops->flush can't ever reach anything different from arch_wb_cache_pmem(). It should be also pointed out that for some uses of persistent memory it is needed to flush only a very small amount of data (such as 1 cacheline), and it would be overkill if we go through that device mapper machinery for a single flushed cache line. Fix this by removing the pmem_dax_ops->flush abstraction and call arch_wb_cache_pmem() directly from dax_flush(). Also, remove the device mapper code that forwards the flushes. Fixes: abebfbe2f731 ("dm: add ->flush() dax operation support") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-11dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACKArnd Bergmann1-10/+10
The new lockdep support for completions causeed the stack usage in dm-integrity to explode, in case of write_journal from 504 bytes to 1120 (using arm gcc-7.1.1): drivers/md/dm-integrity.c: In function 'write_journal': drivers/md/dm-integrity.c:827:1: error: the frame size of 1120 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] The problem is that not only the size of 'struct completion' grows significantly, but we end up having multiple copies of it on the stack when we assign it from a local variable after the initial declaration. COMPLETION_INITIALIZER_ONSTACK() is the right thing to use when we want to declare and initialize a completion on the stack. However, this driver doesn't do that and instead initializes the completion just before it is used. In this case, init_completion() does the same thing more efficiently, and drops the stack usage for the function above down to 496 bytes. While the other functions in this file are not bad enough to cause a warning, they benefit equally from the change, so I do the change across the entire file. In the one place where we reuse a completion, I picked the cheaper reinit_completion() over init_completion(). Fixes: cd8084f91c02 ("locking/lockdep: Apply crossrelease to completions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-11dm integrity: make blk_integrity_profile structure constBhumika Goyal1-1/+1
Make this structure const as it is only stored in the profile field of a blk_integrity structure. This field is of type const, so make structure as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-11dm integrity: do not check integrity for failed read operationsHyunchul Lee1-1/+5
Even though read operations fail, dm_integrity_map_continue() calls integrity_metadata() to check integrity. In this case, just complete these. This also makes it so read I/O errors do not generate integrity warnings in the kernel log. Cc: stable@vger.kernel.org Signed-off-by: Hyunchul Lee <cheol.lee@lge.com> Acked-by: Milan Broz <gmazyland@gmail.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-11dm log writes: fix >512b sectorsize supportJosef Bacik1-11/+31
512b sectors vs device's physical sectorsize was not maintained consistently and as such the support for >512b sector devices has bugs. The log metadata expects native sectorsize but 512b sectors were being stored. Also, device's sectorsize was assumed when assigning the bi_sector for blocks that were being logged. Fix this up by adding two helpers to convert between bio and dev sectors, and use these in the appropriate places to fix the problem and make it clear which units go where. Doing so allows dm-log-writes use with 4k devices. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-11dm log writes: don't use all the cpu while waiting to log blocksJosef Bacik1-1/+1
The check to see if the logging kthread needs to go to sleep is wrong, it checks lc->pending_blocks, which will be non-0 if there are any blocks that are pending, whether they are ready to be logged or not. What we really want is to go to sleep until it's time to log blocks, so change this check so we do actually go to sleep in between flushes. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-09Merge branch 'for-4.14/block-postmerge' of git://git.kernel.dk/linux-blockLinus Torvalds10-57/+99
Pull followup block layer updates from Jens Axboe: "I ended up splitting the main pull request for this series into two, mainly because of clashes between NVMe fixes that went into 4.13 after the for-4.14 branches were split off. This pull request is mostly NVMe, but not exclusively. In detail, it contains: - Two pull request for NVMe changes from Christoph. Nothing new on the feature front, basically just fixes all over the map for the core bits, transport, rdma, etc. - Series from Bart, cleaning up various bits in the BFQ scheduler. - Series of bcache fixes, which has been lingering for a release or two. Coly sent this in, but patches from various people in this area. - Set of patches for BFQ from Paolo himself, updating both documentation and fixing some corner cases in performance. - Series from Omar, attempting to now get the 4k loop support correct. Our confidence level is higher this time. - Series from Shaohua for loop as well, improving O_DIRECT performance and fixing a use-after-free" * 'for-4.14/block-postmerge' of git://git.kernel.dk/linux-block: (74 commits) bcache: initialize dirty stripes in flash_dev_run() loop: set physical block size to logical block size bcache: fix bch_hprint crash and improve output bcache: Update continue_at() documentation bcache: silence static checker warning bcache: fix for gc and write-back race bcache: increase the number of open buckets bcache: Correct return value for sysfs attach errors bcache: correct cache_dirty_target in __update_writeback_rate() bcache: gc does not work when triggering by manual command bcache: Don't reinvent the wheel but use existing llist API bcache: do not subtract sectors_to_gc for bypassed IO bcache: fix sequential large write IO bypass bcache: Fix leak of bdev reference block/loop: remove unused field block/loop: fix use after free bfq: Use icq_to_bic() consistently bfq: Suppress compiler warnings about comparisons bfq: Check kstrtoul() return value bfq: Declare local functions static ...
2017-09-07Merge tag 'md/4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds9-65/+225
Pull MD updates from Shaohua Li: "This update mainly fixes bugs: - Make raid5 ppl support several ppl from Pawel - Several raid5-cache bug fixes from Song - Bitmap fixes from Neil and Me - One raid1/10 regression fix since 4.12 from Me - Other small fixes and cleanup" * tag 'md/4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/bitmap: disable bitmap_resize for file-backed bitmaps. raid5-ppl: Recovery support for multiple partial parity logs md: Runtime support for multiple ppls md/raid0: attach correct cgroup info in bio lib/raid6: align AVX512 constants to 512 bits, not bytes raid5: remove raid5_build_block md/r5cache: call mddev_lock/unlock() in r5c_journal_mode_show md: replace seq_release_private with seq_release md: notify about new spare disk in the container md/raid1/10: reset bio allocated from mempool md/raid5: release/flush io in raid5_do_work() md/bitmap: copy correct data for bitmap super
2017-09-07bcache: initialize dirty stripes in flash_dev_run()Tang Junhui3-6/+7
bcache uses a Proportion-Differentiation Controller algorithm to control writeback rate to cached devices. In the PD controller algorithm, dirty stripes of thin flash device should not be counted in, because flash only volumes never write back dirty data. Currently dirty stripe counter for thin flash device is not initialized when the thin flash device starts. Which means the following calculation in PD controller will reference an undefined dirty stripes number, and all cached devices attached to the same cache set where the thin flash device lies on may have an inaccurate writeback rate. This patch calles bch_sectors_dirty_init() in flash_dev_run(), to correctly initialize dirty stripe counter when the thin flash device starts to run. This patch also does following parameter data type change, -void bch_sectors_dirty_init(struct cached_dev *dc); +void bch_sectors_dirty_init(struct bcache_device *); to call this function conveniently in flash_dev_run(). (Commit log is composed by Coly Li) Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-07Merge branch 'for-4.14/block' of git://git.kernel.dk/linux-blockLinus Torvalds38-162/+165
Pull block layer updates from Jens Axboe: "This is the first pull request for 4.14, containing most of the code changes. It's a quiet series this round, which I think we needed after the churn of the last few series. This contains: - Fix for a registration race in loop, from Anton Volkov. - Overflow complaint fix from Arnd for DAC960. - Series of drbd changes from the usual suspects. - Conversion of the stec/skd driver to blk-mq. From Bart. - A few BFQ improvements/fixes from Paolo. - CFQ improvement from Ritesh, allowing idling for group idle. - A few fixes found by Dan's smatch, courtesy of Dan. - A warning fixup for a race between changing the IO scheduler and device remova. From David Jeffery. - A few nbd fixes from Josef. - Support for cgroup info in blktrace, from Shaohua. - Also from Shaohua, new features in the null_blk driver to allow it to actually hold data, among other things. - Various corner cases and error handling fixes from Weiping Zhang. - Improvements to the IO stats tracking for blk-mq from me. Can drastically improve performance for fast devices and/or big machines. - Series from Christoph removing bi_bdev as being needed for IO submission, in preparation for nvme multipathing code. - Series from Bart, including various cleanups and fixes for switch fall through case complaints" * 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits) kernfs: checking for IS_ERR() instead of NULL drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set drbd: Fix allyesconfig build, fix recent commit drbd: switch from kmalloc() to kmalloc_array() drbd: abort drbd_start_resync if there is no connection drbd: move global variables to drbd namespace and make some static drbd: rename "usermode_helper" to "drbd_usermode_helper" drbd: fix race between handshake and admin disconnect/down drbd: fix potential deadlock when trying to detach during handshake drbd: A single dot should be put into a sequence. drbd: fix rmmod cleanup, remove _all_ debugfs entries drbd: Use setup_timer() instead of init_timer() to simplify the code. drbd: fix potential get_ldev/put_ldev refcount imbalance during attach drbd: new disk-option disable-write-same drbd: Fix resource role for newly created resources in events2 drbd: mark symbols static where possible drbd: Send P_NEG_ACK upon write error in protocol != C drbd: add explicit plugging when submitting batches drbd: change list_for_each_safe to while(list_first_entry_or_null) drbd: introduce drbd_recv_header_maybe_unplug ...
2017-09-06Merge branch 'linus' of ↵Linus Torvalds1-6/+5
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.14: API: - Defer scompress scratch buffer allocation to first use. - Add __crypto_xor that takes separte src and dst operands. - Add ahash multiple registration interface. - Revamped aead/skcipher algif code to fix async IO properly. Drivers: - Add non-SIMD fallback code path on ARM for SVE. - Add AMD Security Processor framework for ccp. - Add support for RSA in ccp. - Add XTS-AES-256 support for CCP version 5. - Add support for PRNG in sun4i-ss. - Add support for DPAA2 in caam. - Add ARTPEC crypto support. - Add Freescale RNGC hwrng support. - Add Microchip / Atmel ECC driver. - Add support for STM32 HASH module" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits) crypto: af_alg - get_page upon reassignment to TX SGL crypto: cavium/nitrox - Fix an error handling path in 'nitrox_probe()' crypto: inside-secure - fix an error handling path in safexcel_probe() crypto: rockchip - Don't dequeue the request when device is busy crypto: cavium - add release_firmware to all return case crypto: sahara - constify platform_device_id MAINTAINERS: Add ARTPEC crypto maintainer crypto: axis - add ARTPEC-6/7 crypto accelerator driver crypto: hash - add crypto_(un)register_ahashes() dt-bindings: crypto: add ARTPEC crypto crypto: algif_aead - fix comment regarding memory layout crypto: ccp - use dma_mapping_error to check map error lib/mpi: fix build with clang crypto: sahara - Remove leftover from previous used spinlock crypto: sahara - Fix dma unmap direction crypto: af_alg - consolidation of duplicate code crypto: caam - Remove unused dentry members crypto: ccp - select CONFIG_CRYPTO_RSA crypto: ccp - avoid uninitialized variable warning crypto: serpent - improve __serpent_setkey with UBSAN ...
2017-09-06bcache: fix bch_hprint crash and improve outputMichael Lyle1-15/+35
Most importantly, solve a crash where %llu was used to format signed numbers. This would cause a buffer overflow when reading sysfs writeback_rate_debug, as only 20 bytes were allocated for this and %llu writes 20 characters plus a null. Always use the units mechanism rather than having different output paths for simplicity. Also, correct problems with display output where 1.10 was a larger number than 1.09, by multiplying by 10 and then dividing by 1024 instead of dividing by 100. (Remainders of >= 1000 would print as .10). Minor changes: Always display the decimal point instead of trying to omit it based on number of digits shown. Decide what units to use based on 1000 as a threshold, not 1024 (in other words, always print at most 3 digits before the decimal point). Signed-off-by: Michael Lyle <mlyle@lyle.org> Reported-by: Dmitry Yu Okunev <dyokunev@ut.mephi.ru> Acked-by: Kent Overstreet <kent.overstreet@gmail.com> Reviewed-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06bcache: Update continue_at() documentationDan Carpenter1-4/+0
continue_at() doesn't have a return statement anymore. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06bcache: silence static checker warningDan Carpenter1-3/+0
In olden times, closure_return() used to have a hidden return built in. We removed the hidden return but forgot to add a new return here. If "c" were NULL we would oops on the next line, but fortunately "c" is never NULL. Let's just remove the if statement. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06bcache: fix for gc and write-back raceTang Junhui3-2/+10
gc and write-back get raced (see the email "bcache get stucked" I sended before): gc thread write-back thread | |bch_writeback_thread() |bch_gc_thread() | | |==>read_dirty() |==>bch_btree_gc() | |==>btree_root() //get btree root | | //node write locker | |==>bch_btree_gc_root() | | |==>read_dirty_submit() | |==>write_dirty() | |==>continue_at(cl, | | write_dirty_finish, | | system_wq); | |==>write_dirty_finish()//excute | | //in system_wq | |==>bch_btree_insert() | |==>bch_btree_map_leaf_nodes() | |==>__bch_btree_map_nodes() | |==>btree_root //try to get btree | | //root node read | | //lock | |-----stuck here |==>bch_btree_set_root() |==>bch_journal_meta() |==>bch_journal() |==>journal_try_write() |==>journal_write_unlocked() //journal_full(&c->journal) | //condition satisfied |==>continue_at(cl, journal_write, system_wq); //try to excute | //journal_write in system_wq | //but work queue is excuting | //write_dirty_finish() |==>closure_sync(); //wait journal_write execute | //over and wake up gc, |-------------stuck here |==>release root node write locker This patch alloc a separate work-queue for write-back thread to avoid such race. (Commit log re-organized by Coly Li to pass checkpatch.pl checking) Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Acked-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06bcache: increase the number of open bucketsTang Junhui1-1/+3
In currently, we only alloc 6 open buckets for each cache set, but in usually, we always attach about 10 or so backend devices for each cache set, and the each bcache device are always accessed by about 10 or so threads in top application layer. So 6 open buckets are too few, It has led to that each of the same thread write data to different buckets, which would cause low efficiency write-back, and also cause buckets inefficient, and would be Very easy to run out of. I add debug message in bch_open_buckets_alloc() to print alloc bucket info, and test with ten bcache devices with a cache set, and each bcache device is accessed by ten threads. From the debug message, we can see that, after the modification, One bucket is more likely to assign to the same thread, and the data from the same thread are more likely to write the same bucket. Usually the same thread always write/read the same backend device, so it is good for write-back and also promote the usage efficiency of buckets. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06bcache: Correct return value for sysfs attach errorsTony Asleson1-2/+2
If you encounter any errors in bch_cached_dev_attach it will return a negative error code. The variable 'v' which stores the result is unsigned, thus user space sees a very large value returned for bytes written which can cause incorrect user space behavior. Utilize 1 signed variable to use throughout the function to preserve error return capability. Signed-off-by: Tony Asleson <tasleson@redhat.com> Acked-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06bcache: correct cache_dirty_target in __update_writeback_rate()Tang Junhui2-1/+21
__update_write_rate() uses a Proportion-Differentiation Controller algorithm to control writeback rate. A dirty target number is used in this PD controller to control writeback rate. A larger target number will make the writeback rate smaller, on the versus, a smaller target number will make the writeback rate larger. bcache uses the following steps to calculate the target number, 1) cache_sectors = all-buckets-of-cache-set * buckets-size 2) cache_dirty_target = cache_sectors * cached-device-writeback_percent 3) target = cache_dirty_target * (sectors-of-cached-device/sectors-of-all-cached-devices-of-this-cache-set) The calculation at step 1) for cache_sectors is incorrect, which does not consider dirty blocks occupied by flash only volume. A flash only volume can be took as a bcache device without cached device. All data sectors allocated for it are persistent on cache device and marked dirty, they are not touched by bcache writeback and garbage collection code. So data blocks of flash only volume should be ignore when calculating cache_sectors of cache set. Current code does not subtract dirty sectors of flash only volume, which results a larger target number from the above 3 steps. And in sequence the cache device's writeback rate is smaller then a correct value, writeback speed is slower on all cached devices. This patch fixes the incorrect slower writeback rate by subtracting dirty sectors of flash only volumes in __update_writeback_rate(). (Commit log composed by Coly Li to pass checkpatch.pl checking) Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06bcache: gc does not work when triggering by manual commandTang Junhui1-1/+14
I try to execute the following command to trigger gc thread: [root@localhost internal]# echo 1 > trigger_gc But it does not work, I debug the code in gc_should_run(), It works only if in invalidating or sectors_to_gc < 0. So set sectors_to_gc to -1 to meet the condition when we trigger gc by manual command. (Code comments aded by Coly Li) Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06bcache: Don't reinvent the wheel but use existing llist APIByungchul Park1-13/+2
Although llist provides proper APIs, they are not used. Make them used. Signed-off-by: Byungchul Park <byungchul.park@lge.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06bcache: do not subtract sectors_to_gc for bypassed IOTang Junhui1-3/+3
Since bypassed IOs use no bucket, so do not subtract sectors_to_gc to trigger gc thread. Signed-off-by: tang.junhui <tang.junhui@zte.com.cn> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06bcache: fix sequential large write IO bypassTang Junhui1-6/+0
Sequential write IOs were tested with bs=1M by FIO in writeback cache mode, these IOs were expected to be bypassed, but actually they did not. We debug the code, and find in check_should_bypass(): if (!congested && mode == CACHE_MODE_WRITEBACK && op_is_write(bio_op(bio)) && (bio->bi_opf & REQ_SYNC)) goto rescale that means, If in writeback mode, a write IO with REQ_SYNC flag will not be bypassed though it is a sequential large IO, It's not a correct thing to do actually, so this patch remove these codes. Signed-off-by: tang.junhui <tang.junhui@zte.com.cn> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-06bcache: Fix leak of bdev referenceJan Kara1-0/+2
If blkdev_get_by_path() in register_bcache() fails, we try to lookup the block device using lookup_bdev() to detect which situation we are in to properly report error. However we never drop the reference returned to us from lookup_bdev(). Fix that. Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-05md/raid5: preserve STRIPE_ON_UNPLUG_LIST in break_stripe_batch_listDennis Yang1-1/+2
In release_stripe_plug(), if a stripe_head has its STRIPE_ON_UNPLUG_LIST set, it indicates that this stripe_head is already in the raid5_plug_cb list and release_stripe() would be called instead to drop a reference count. Otherwise, the STRIPE_ON_UNPLUG_LIST bit would be set for this stripe_head and it will get queued into the raid5_plug_cb list. Since break_stripe_batch_list() did not preserve STRIPE_ON_UNPLUG_LIST, A stripe could be re-added to plug list while it is still on that list in the following situation. If stripe_head A is added to another stripe_head B's batch list, in this case A will have its batch_head != NULL and be added into the plug list. After that, stripe_head B gets handled and called break_stripe_batch_list() to reset all the batched stripe_head(including A which is still on the plug list)'s state and reset their batch_head to NULL. Before the plug list gets processed, if there is another write request comes in and get stripe_head A, A will have its batch_head == NULL (cleared by calling break_stripe_batch_list() on B) and be added to plug list once again. Signed-off-by: Dennis Yang <dennisyang@qnap.com> Cc: stable@vger.kernel.org (v4.1+) Signed-off-by: Shaohua Li <shli@fb.com>
2017-09-05md/raid5: fix a race condition in stripe batchShaohua Li1-2/+8
We have a race condition in below scenario, say have 3 continuous stripes, sh1, sh2 and sh3, sh1 is the stripe_head of sh2 and sh3: CPU1 CPU2 CPU3 handle_stripe(sh3) stripe_add_to_batch_list(sh3) -> lock(sh2, sh3) -> lock batch_lock(sh1) -> add sh3 to batch_list of sh1 -> unlock batch_lock(sh1) clear_batch_ready(sh1) -> lock(sh1) and batch_lock(sh1) -> clear STRIPE_BATCH_READY for all stripes in batch_list -> unlock(sh1) and batch_lock(sh1) ->clear_batch_ready(sh3) -->test_and_clear_bit(STRIPE_BATCH_READY, sh3) --->return 0 as sh->batch == NULL -> sh3->batch_head = sh1 -> unlock (sh2, sh3) In CPU1, handle_stripe will continue handle sh3 even it's in batch stripe list of sh1. By moving sh3->batch_head assignment in to batch_lock, we make it impossible to clear STRIPE_BATCH_READY before batch_head is set. Thanks Stephane for helping debug this tricky issue. Reported-and-tested-by: Stephane Thiell <sthiell@stanford.edu> Cc: stable@vger.kernel.org (v4.1+) Signed-off-by: Shaohua Li <shli@fb.com>
2017-08-31md/bitmap: disable bitmap_resize for file-backed bitmaps.NeilBrown1-0/+5
bitmap_resize() does not work for file-backed bitmaps. The buffer_heads are allocated and initialized when the bitmap is read from the file, but resize doesn't read from the file, it loads from the internal bitmap. When it comes time to write the new bitmap, the bh is non-existent and we crash. The common case when growing an array involves making the array larger, and that normally means making the bitmap larger. Doing that inside the kernel is possible, but would need more code. It is probably easier to require people who use file-backed bitmaps to remove them and re-add after a reshape. So this patch disables the resizing of arrays which have file-backed bitmaps. This is better than crashing. Reported-by: Zhilong Liu <zlliu@suse.com> Fixes: d60b479d177a ("md/bitmap: add bitmap_resize function to allow bitmap resizing.") Cc: stable@vger.kernel.org (v3.5+). Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-08-28Merge tag 'v4.13-rc7' into for-4.14/block-postmergeJens Axboe2-16/+50
Linux 4.13-rc7 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-28dm ioctl: constify ioctl lookup tableEric Biggers1-1/+1
Constify the lookup table for device-mapper ioctls so that it is placed in .rodata. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-28dm: constify argument arraysEric Biggers9-17/+18
The arrays of 'struct dm_arg' are never modified by the device-mapper core, so constify them so that they are placed in .rodata. (Exception: the args array in dm-raid cannot be constified because it is allocated on the stack and modified.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-28dm integrity: count and display checksum failuresMikulas Patocka1-2/+8
This changes DM integrity to count the number of checksum failures and report the counter in response to STATUSTYPE_INFO request (via 'dmsetup status'). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>