summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2022-07-07i2c: cadence: Unregister the clk notifier in error pathSatish Nagireddy1-0/+1
This patch ensures that the clock notifier is unregistered when driver probe is returning error. Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: Satish Nagireddy <satish.nagireddy@getcruise.com> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-29i2c: piix4: Fix a memory leak in the EFCH MMIO supportJean Delvare1-9/+7
The recently added support for EFCH MMIO regions introduced a memory leak in that code path. The leak is caused by the fact that release_resource() merely removes the resource from the tree but does not free its memory. We need to call release_mem_region() instead, which does free the memory. As a nice side effect, this brings back some symmetry between the legacy and MMIO paths. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Reviewed-by: Terry Bowman <terry.bowman@amd.com> Tested-by: Terry Bowman <Terry.Bowman@amd.com> Fixes: 7c148722d074 ("i2c: piix4: Add EFCH MMIO support to region request and release") Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-14i2c: mediatek: Fix an error handling path in mtk_i2c_probe()Christophe JAILLET1-2/+7
The clsk are prepared, enabled, then disabled. So if an error occurs after the disable step, they are still prepared. Add an error handling path to unprepare the clks in such a case, as already done in the .remove function. Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid circular locking") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-13i2c: designware: Use standard optional ref clock implementationSerge Semin2-5/+11
Even though the DW I2C controller reference clock source is requested by the method devm_clk_get() with non-optional clock requirement the way the clock handler is used afterwards has a pure optional clock semantic (though in some circumstances we can get a warning about the clock missing printed in the system console). There is no point in reimplementing that functionality seeing the kernel clock framework already supports the optional interface from scratch. Thus let's convert the platform driver to using it. Note by providing this commit we get to fix two problems. The first one was introduced in commit c62ebb3d5f0d ("i2c: designware: Add support for an interface clock"). It causes not having the interface clock (pclk) enabled/disabled in case if the reference clock isn't provided. The second problem was first introduced in commit b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided"). Since that modification the deferred probe procedure has been unsupported in case if the interface clock isn't ready. Fixes: c62ebb3d5f0d ("i2c: designware: Add support for an interface clock") Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: npcm7xx: Add check for platform_driver_registerJiasheng Jiang1-2/+1
As platform_driver_register() could fail, it should be better to deal with the return value in order to maintain the code consisitency. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-02i2c: ismt: prevent memory corruption in ismt_access()Dan Carpenter1-0/+3
The "data->block[0]" variable comes from the user and is a number between 0-255. It needs to be capped to prevent writing beyond the end of dma_buffer[]. Fixes: 5e9a97b1f449 ("i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL") Reported-and-tested-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-05-31Merge tag 'i2c-for-5.19' of ↵Linus Torvalds13-232/+371
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Only driver updates for 5.19. Bigger changes are for Meson, NPCM, and R-Car, but there are also changes all over the place" * tag 'i2c-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits) i2c: meson: fix typo in comment i2c: rcar: use flags instead of atomic_xfer i2c: rcar: REP_AFTER_RD is not a persistent flag i2c: rcar: use BIT macro consistently i2c: qcom-geni: remove unnecessary conditions i2c: mt7621: Use devm_platform_get_and_ioremap_resource() i2c: rcar: refactor handling of first message i2c: rcar: avoid race condition with SMIs i2c: xiic: Correct the datatype for rx_watermark i2c: rcar: fix PM ref counts in probe error paths i2c: npcm: Handle spurious interrupts i2c: npcm: Correct register access width i2c: npcm: Add tx complete counter i2c: npcm: Fix timeout calculation i2c: npcm: Remove unused variable clk_regmap i2c: npcm: Change the way of getting GCR regmap i2c: xiic: Fix Tx Interrupt path for grouped messages i2c: xiic: Fix coding style issues i2c: xiic: return value of xiic_reinit i2c: cadence: Increase timeout per message if necessary ...
2022-05-21drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllersPiyush Malgujar1-0/+1
Due to i2c->adap.dev.fwnode not being set, ACPI_COMPANION() wasn't properly found for TWSI controllers. Signed-off-by: Szymon Balcerak <sbalcerak@marvell.com> Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: meson: fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: rcar: use flags instead of atomic_xferKuninori Morimoto1-10/+10
i2c-rcar already has priv->flags. This patch adds a new persistent flag ID_P_NOT_ATOMIC and uses it to save the extra variable. The negation of the logic was done to make the code more readable. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [wsa: negated the logic, rebased, updated the commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: rcar: REP_AFTER_RD is not a persistent flagWolfram Sang1-9/+8
Previous refactoring makes it easy now to convert the above flag to a non-persistent one. This is more appropriate and easier to maintain. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: rcar: use BIT macro consistentlyWolfram Sang1-35/+35
Easier to read and ensures proper types. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: ismt: Provide a DMA buffer for Interrupt Cause LoggingMika Westerberg1-0/+14
Before sending a MSI the hardware writes information pertinent to the interrupt cause to a memory location pointed by SMTICL register. This memory holds three double words where the least significant bit tells whether the interrupt cause of master/target/error is valid. The driver does not use this but we need to set it up because otherwise it will perform DMA write to the default address (0) and this will cause an IOMMU fault such as below: DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Write] Request device [00:12.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set To prevent this from happening, provide a proper DMA buffer for this that then gets mapped by the IOMMU accordingly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: From: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: qcom-geni: remove unnecessary conditionsDan Carpenter1-4/+2
We know that "ret" is a negative error code at this point so there is no need to check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: mt7621: Use devm_platform_get_and_ioremap_resource()Yang Yingliang1-4/+1
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()Yang Yingliang1-2/+8
Fix the missing clk_disable_unprepare() before return from mtk_i2c_probe() in the error handling case. Fixes: d04913ec5f89 ("i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: rcar: refactor handling of first messageWolfram Sang1-27/+23
After moving ICMSR handling to interrupt handlers previously to fix a race condition, we can now also move ICMSR handling for the first message out of the function to prepare a message. By introducing a seperate function to initialize the first message, we can not only remove some code duplication but the remaining code is also easier to follow. The function to prepare a message is much simpler without ICMSR handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: rcar: avoid race condition with SMIsWolfram Sang1-11/+17
A customer experienced a race condition with 'repeated starts' when a System Management Interrupt took over for 30us and more. The problem was that during the SMI a new MAT interrupt came in because we set up the 'repeated start' condition. But the old one was not acknowledged yet. So, when it was acknowledged after the SMI, the new MAT interrupt was lost, confusing the state machine of the driver. The fix consists of two parts. First, we do not clear the status register for 'repeated starts' when preparing the next message anymore. The interrupt handlers for sending and receiving data is now solely responsible for that and it makes the code easier to follow, in fact. Secondly, clearing the status register is now split up to handle MAT interrupts independently. This avoids the race condition because the old MAT interrupt will be now cleared before we initiate the "repeated start" condition. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: xiic: Correct the datatype for rx_watermarkShubhrajyoti Datta1-2/+2
The message length data type should be u16 as per the i2c_msg structure. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: rcar: fix PM ref counts in probe error pathsKuninori Morimoto1-6/+9
We have to take care of ID_P_PM_BLOCKED when bailing out during probe. Fixes: 7ee24eb508d6 ("i2c: rcar: disable PM in multi-master mode") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: npcm: Handle spurious interruptsTali Perry1-29/+62
On some platforms in rare cases (1 to 100,000 transactions), the i2c gets a spurious interrupt which means that we enter an interrupt but in the interrupt handler we don't find any status bit that points to the reason we got this interrupt. This may be a case of a rare HW issue or signal integrity issue that is still under investigation. In order to overcome this we are doing the following: 1. Disable incoming interrupts in master mode only when slave mode is not enabled. 2. Clear end of busy (EOB) after every interrupt. 3. Clear other status bits (just in case since we found them cleared) 4. Return correct status during the interrupt that will finish the transaction. On next xmit transaction if the bus is still busy the master will issue a recovery process before issuing the new transaction. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: npcm: Correct register access widthTyrone Ting1-2/+2
The SMBnCTL3 register is 8-bit wide and the 32-bit access was always incorrect, but simply didn't cause a visible error on the 32-bit machine. On the 64-bit machine, the kernel message reports that ESR value is 0x96000021. Checking Arm Architecture Reference Manual Armv8 suggests that it's the alignment fault. SMBnCTL3's address is 0xE. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: npcm: Add tx complete counterTali Perry1-0/+4
tx_complete counter is used to indicate successful transaction count. Similar counters for failed tx were previously added. Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: npcm: Fix timeout calculationTali Perry1-4/+4
Use adap.timeout for timeout calculation instead of hard-coded value of 35ms. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: npcm: Remove unused variable clk_regmapTali Perry1-5/+0
Remove unused variable clk_regmap. Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: npcm: Change the way of getting GCR regmapTali Perry1-4/+8
Change the way of getting NPCM system manager reigster (GCR) and still maintain the old mechanism as a fallback if getting nuvoton,sys-mgr fails while working with the legacy devicetree file. Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-14i2c: xiic: Fix Tx Interrupt path for grouped messagesRaviteja Narayanam1-18/+20
When a group of messages are sent from user space as a set, if the last message has less than Tx FIFO DEPTH number of bytes to transfer, Tx half empty interrupt is triggered continuously from the hardware. It is due to Bus not busy interrupt coming along with Tx half empty and tx empty. Hence, service the Tx interrupts before Bus not busy interrupt to update the i2c message status correctly. Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-14i2c: xiic: Fix coding style issuesMichal Simek1-17/+20
Most of these stuff are reported by checkpatch. But fixes are: - Incorrect indetation - Missing blank line after variable declaration - Additional () - Missing spaces around + - Missing parenthesis when if has them - Newlines - Remove MODULE_ALIAS - none is really using it Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-14i2c: xiic: return value of xiic_reinitShubhrajyoti Datta1-1/+4
Check the return value of xiic_reinit. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-14i2c: cadence: Increase timeout per message if necessaryLucas Tanure1-2/+10
Timeout as 1 second sets an upper limit on the length of the transfer executed, but there is no maximum length of a write or read message set in i2c_adapter_quirks for this controller. This upper limit affects devices that require sending large firmware blobs over I2C. To remove that limitation, calculate the minimal time necessary, plus some wiggle room, for every message and use it instead of the default one second, if more than one second. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-14i2c: designware: Sort timing parameter ACPI method calls by the speedJarkko Nikula1-1/+1
It's more logical to read these get timing parameters ACPI method calls sorted by speed categories in increasing order: Standard-mode, Fast-mode, Fast-mode Plus and High-speed mode. Originally these were in order after commit a92ec1746f10 ("i2c: designware: get fast plus and high speed *CNT configuration") but got mixed up over the years. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-14i2c: at91: Initialize dma_buf in at91_twi_xfer()Nathan Chancellor1-1/+1
Clang warns: drivers/i2c/busses/i2c-at91-master.c:707:6: warning: variable 'dma_buf' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] if (dev->use_dma) { ^~~~~~~~~~~~ drivers/i2c/busses/i2c-at91-master.c:717:27: note: uninitialized use occurs here i2c_put_dma_safe_msg_buf(dma_buf, m_start, !ret); ^~~~~~~ Initialize dma_buf to NULL, as i2c_put_dma_safe_msg_buf() is a no-op when the first argument is NULL, which will work for the !dev->use_dma case. Fixes: 03fbb903c8bf ("i2c: at91: use dma safe buffers") Link: https://github.com/ClangBuiltLinux/linux/issues/1629 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-04i2c: davinci: using pm_runtime_resume_and_get instead of pm_runtime_get_syncMinghao Chi1-8/+4
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. This change is just to simplify the code, no actual functional changes. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-04i2c: meson: fix missing clk_disable_unprepare() on error in meson_i2c_probe()Yang Yingliang1-1/+3
Fix the missing clk_disable_unprepare() before return from meson_i2c_probe() in the error handling case. Fixes: a57f9b4dd6f5 ("i2c: meson: Use 50% duty cycle for I2C clock") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-04i2c: powermac: Prepare cleanup of powerpc's asm/prom.hChristophe Leroy1-1/+1
powerpc's asm/prom.h brings some headers that it doesn't need itself. In order to clean it up, first add missing headers in users of asm/prom.h Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-04i2c: at91: use dma safe buffersMichael Walle1-0/+11
The supplied buffer might be on the stack and we get the following error message: [ 3.312058] at91_i2c e0070600.i2c: rejecting DMA map of vmalloc memory Use i2c_{get,put}_dma_safe_msg_buf() to get a DMA-able memory region if necessary. Fixes: 60937b2cdbf9 ("i2c: at91: add dma support") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-04i2c: mediatek: Optimize master_xfer() and avoid circular lockingAngeloGioacchino Del Regno1-4/+7
Especially (but not only) during probe, it may happen that multiple devices are communicating via i2c (or multiple i2c busses) and sometimes while others are probing asynchronously. For example, a Cr50 TPM may be filling entropy (or userspace may be reading random data) while the rt5682 (i2c) codec driver reads/sets some registers, like while getting/setting a clock's rate, which happens both during probe and during system operation. In this driver, the mtk_i2c_transfer() function (which is the i2c .master_xfer() callback) was granularly managing the clocks by performing a clk_bulk_prepare_enable() to start them and its inverse. This is not only creating possible circular locking dependencies in the some cases (like former explanation), but it's also suboptimal, as clk_core prepare/unprepare operations are using mutex locking, which creates a bit of unwanted overhead (for example, i2c trackpads will call master_xfer() every few milliseconds!). With this commit, we avoid both the circular locking and additional overhead by changing how we handle the clocks in this driver: - Prepare the clocks during probe (and PM resume) - Enable/disable clocks in mtk_i2c_transfer() - Unprepare the clocks only for driver removal (and PM suspend) For the sake of providing a full explanation: during probe, the clocks are not only prepared but also enabled, as this is needed for some hardware initialization but, after that, we are disabling but not unpreparing them, leaving an expected state for the aforementioned clock handling strategy. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-04i2c: designware: Modify timing parameters for amdpsp mailboxJan Dabros1-2/+2
Adjust retry period and timeout values for x86-PSP mailbox based on the typical I2C traffic generated by PSP. In order to limit the possibility of timeouts, x86 should reduce the interval between retries as well as increase overall time after which it gives up. Signed-off-by: Jan Dabros <jsd@semihalf.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: ismt: Fix undefined behavior due to shift overflowing the constantBorislav Petkov1-2/+2
Fix: drivers/i2c/busses/i2c-ismt.c: In function ‘ismt_hw_init’: drivers/i2c/busses/i2c-ismt.c:770:2: error: case label does not reduce to an integer constant case ISMT_SPGT_SPD_400K: ^~~~ drivers/i2c/busses/i2c-ismt.c:773:2: error: case label does not reduce to an integer constant case ISMT_SPGT_SPD_1M: ^~~~ See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: meson: Use 50% duty cycle for I2C clockLucas Tanure1-10/+60
The duty cycle of 33% is less than the required by the I2C specs for the LOW period of the SCL clock. Move the duty cyle to 50% for 100Khz or lower clocks, and (40% High SCL / 60% Low SCL) duty cycle for clocks above 100Khz. Signed-off-by: Lucas Tanure <tanure@linux.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: meson: Use _SHIFT and _MASK for register definitionsLucas Tanure1-19/+22
Differentiate between masks and shifts Signed-off-by: Lucas Tanure <tanure@linux.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: rcar: add support for I2C_M_RECV_LENWolfram Sang1-4/+27
With this feature added, SMBus Block reads and Proc calls are now supported. This patch is the best of two independent developments by Wolfram and Bhuvanesh + Andrew, refactored again by Wolfram. Signed-off-by: Bhuvanesh Surachari <bhuvanesh_surachari@mentor.com> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: dev: Force case user pointers in compat_i2cdev_ioctl()Andy Shevchenko1-1/+1
Sparse has warned us about wrong address space for user pointers: i2c-dev.c:561:50: warning: incorrect type in initializer (different address spaces) i2c-dev.c:561:50: expected unsigned char [usertype] *buf i2c-dev.c:561:50: got void [noderef] __user * Force cast the pointer to (__u8 *) that is used by I²C core code. Note, this is an additional fix to the previously addressed similar issue in the I2C_RDWR case in the same function. Fixes: 3265a7e6b41b ("i2c: dev: Add __user annotation") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: dev: check return value when calling dev_set_name()Andy Shevchenko1-5/+10
If dev_set_name() fails, the dev_name() is null, check the return value of dev_set_name() to avoid the null-ptr-deref. Fixes: 1413ef638aba ("i2c: dev: Fix the race between the release of i2c_dev and cdev") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: qcom-geni: Use dev_err_probe() for GPI DMA errorBjorn Andersson1-4/+2
The GPI DMA engine driver can be compiled as a module, in which case the likely probe deferral "error" shows up in the kernel log. Switch to using dev_err_probe() to silence this warning and to ensure that "devices_deferred" in debugfs carries this information. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: imx: Implement errata ERR007805 or e7805 bus frequency limitMarek Vasut1-0/+33
The i.MX8MP Mask Set Errata for Mask 1P33A, Rev. 2.0 has description of errata ERR007805 as below. This errata is found on all MX8M{M,N,P,Q}, MX7{S,D}, MX6{UL{,L,Z},S{,LL,X},S,D,DL,Q,DP,QP} . MX7ULP, MX8Q, MX8X are not affected. MX53 and older status is unknown, as the errata first appears in MX6 errata sheets from 2016 and the latest errata sheet for MX53 is from 2015. Older SoC errata sheets predate the MX53 errata sheet. MX8ULP and MX9 status is unknown as the errata sheet is not available yet. " ERR007805 I2C: When the I2C clock speed is configured for 400 kHz, the SCL low period violates the I2C spec of 1.3 uS min Description: When the I2C module is programmed to operate at the maximum clock speed of 400 kHz (as defined by the I2C spec), the SCL clock low period violates the I2C spec of 1.3 uS min. The user must reduce the clock speed to obtain the SCL low time to meet the 1.3us I2C minimum required. This behavior means the SoC is not compliant to the I2C spec at 400kHz. Workaround: To meet the clock low period requirement in fast speed mode, SCL must be configured to 384KHz or less. " Implement the workaround by matching on the affected SoC specific compatible strings and by limiting the maximum bus frequency in case the SoC is affected. Signed-off-by: Marek Vasut <marex@denx.de> To: linux-i2c@vger.kernel.org Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: pasemi: Wait for write xfers to finishMartin Povišer1-0/+6
Wait for completion of write transfers before returning from the driver. At first sight it may seem advantageous to leave write transfers queued for the controller to carry out on its own time, but there's a couple of issues with it: * Driver doesn't check for FIFO space. * The queued writes can complete while the driver is in its I2C read transfer path which means it will get confused by the raising of XEN (the 'transaction ended' signal). This can cause a spurious ENODATA error due to premature reading of the MRXFIFO register. Adding the wait fixes some unreliability issues with the driver. There's some efficiency cost to it (especially with pasemi_smb_waitready doing its polling), but that will be alleviated once the driver receives interrupt support. Fixes: beb58aa39e6e ("i2c: PA Semi SMBus driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-03-26Merge branch 'i2c/for-mergewindow' of ↵Linus Torvalds36-344/+1332
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - tracepoints when Linux acts as an I2C client - added support for AMD PSP - whole subsystem now uses generic_handle_irq_safe() - piix4 driver gained MMIO access enabling so far missed controllers with AMD chipsets - a bulk of device driver updates, refactorization, and fixes. * 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (61 commits) i2c: mux: demux-pinctrl: do not deactivate a master that is not active i2c: meson: Fix wrong speed use from probe i2c: add tracepoints for I2C slave events i2c: designware: Remove code duplication i2c: cros-ec-tunnel: Fix syntax errors in comments MAINTAINERS: adjust XLP9XX I2C DRIVER after removing the devicetree binding i2c: designware: Mark dw_i2c_plat_{suspend,resume}() as __maybe_unused i2c: mediatek: Add i2c compatible for Mediatek MT8168 dt-bindings: i2c: update bindings for MT8168 SoC i2c: mt65xx: Simplify with clk-bulk i2c: i801: Drop two outdated comments i2c: xiic: Make bus names unique i2c: i801: Add support for the Process Call command i2c: i801: Drop useless masking in i801_access i2c: tegra: Add SMBus block read function i2c: designware: Use the i2c_mark_adapter_suspended/resumed() helpers i2c: designware: Lock the adapter while setting the suspended flag i2c: mediatek: remove redundant null check i2c: mediatek: modify bus speed calculation formula i2c: designware: Fix improper usage of readl ...
2022-03-25Merge tag 'for-v5.18' of ↵Linus Torvalds1-18/+102
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - Introduce "Bypass" charging type used by USB PPS standard - Refactor power_supply_set_input_current_limit_from_supplier() - Add fwnode support to power_supply_get_battery_info() Drivers: - ab8500: continue migrating towards using standard core APIs - axp288 fuel-gauge: refactor driver to be fully resource managed - battery-samsung-sdi: new in-kernel provider for (constant) Samsung battery info - bq24190: disable boost regulator on shutdown - bq24190: add support for battery-info on ACPI based systems - bq25890: prepare driver for usage on ACPI based systems - bq25890: add boost regulator support - cpcap-battery: add NVMEM based battery detection support - injoinic ip5xxx: new driver for power bank IC - upi ug3105: new battery driver - misc small improvements and fixes" * tag 'for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (94 commits) power: ab8500_chargalg: Use CLOCK_MONOTONIC power: supply: Add a driver for Injoinic power bank ICs dt-bindings: trivial-devices: Add Injoinic power bank ICs dt-bindings: vendor-prefixes: Add Injoinic power: supply: ab8500: Remove unused variable power: supply: da9150-fg: Remove unnecessary print function dev_err() power: supply: ab8500: fix a handful of spelling mistakes power: supply: ab8500_fg: Account for line impedance dt-bindings: power: supply: ab8500_fg: Add line impedance power: supply: axp20x_usb_power: fix platform_get_irq.cocci warnings power: supply: axp20x_ac_power: fix platform_get_irq.cocci warning power: supply: wm8350-power: Add missing free in free_charger_irq power: supply: wm8350-power: Handle error for wm8350_register_irq power: supply: Static data for Samsung batteries power: supply: ab8500_fg: Use VBAT-to-Ri if possible power: supply: Support VBAT-to-Ri lookup tables power: supply: ab8500: Standardize BTI resistance power: supply: ab8500: Standardize alert mode charging power: supply: ab8500: Standardize maintenance charging power: supply: bq24190_charger: Delay applying charge_type changes when OTG 5V Vbus boost is on ...
2022-03-20i2c: mux: demux-pinctrl: do not deactivate a master that is not activePeter Rosin1-2/+3
Attempting to rollback the activation of the current master when the current master has not been activated is bad. priv->cur_chan and priv->cur_adap are both still zeroed out and the rollback may result in attempts to revert an of changeset that has not been applied and do result in calls to both del and put the zeroed out i2c_adapter. Maybe it crashes, or whatever, but it's bad in any case. Fixes: e9d1a0a41d44 ("i2c: mux: demux-pinctrl: Fix an error handling path in 'i2c_demux_pinctrl_probe()'") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 00:30:20 +0000