summaryrefslogtreecommitdiff
path: root/drivers/hid/intel-ish-hid/ipc
AgeCommit message (Collapse)AuthorFilesLines
2020-07-07HID: intel-ish-hid: Replace PCI_DEV_FLAGS_NO_D3 with pci_save_stateKai-Heng Feng1-5/+11
PCI_DEV_FLAGS_NO_D3 should not be used outside of PCI core. Instead, we can use pci_save_state() to hint PCI core that the device should stay at D0 during suspend. By doing so, PCI core will let the upstream bridges also stays at D0 so the entire hierarchy is in the correct power state as PCI spec mandates. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-29HID: intel-ish-hid: ipc: Add Tiger Lake PCI device IDSrinivas Pandruvada2-0/+2
Added Tiger Lake PCI device ID to the supported device list. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-18HID: intel-ish-hid: ipc: add CMP device idEven Xu2-0/+2
Add Comet Lake H into ishtp support list. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-09-22Merge branch 'for-5.4/ish' into for-linusJiri Kosina3-37/+61
- fixes for handling power management for intel-ish devices with NO_D3 flag set, from Zhang Lixu Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-19HID: intel-ish-hid: ipc: add EHL device idEven Xu2-0/+2
EHL is a new platform using ishtp solution, add its device id to support list. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-19HID: intel-ish-hid: ipc: check the NO_D3 flag to distinguish resume pathsZhang Lixu1-19/+15
The NO_D3 flag would be set if the ISH enter D0i3 in ish_suspend(), The resume paths can be distinguished by checking the NO_D3 flag. It's more reasonable than checking the FW status. Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-19HID: intel-ish-hid: ipc: make ish suspend paths clearZhang Lixu1-21/+31
For suspend-to-idle, send suspend message and set N0_D3 flag to put the ISH into D0i3 state. For suspend-to-mem, disable the DMA bit before ISH entering D3, and NO_D3 flag is cleared by default, then the ISH would enter D3. Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-19HID: intel-ish-hid: ipc: set NO_D3 flag only when neededZhang Lixu3-3/+21
Currently, the NO_D3 flag is set in ish_probe(), and cleared in ish_remove(). So even if the system goes into S3, ISH is still in D0i3 state. It makes more sense that put ISH into D3 as system goes into S3 and put ISH into D0i3 as system goes into suspend-to-idle. I remove the NO_D3 setting in ish_probe(), so that ISH can enter D3 state when system enters S3. Only set N0_D3 flag when system enters the suspend-to-idle or platform specified, and clear it when system resume. When the ISH enters D3, the FW will check the DMA bit status. If the DMA bit is set, the FW will reset automatically. So the DMA bit need be clear before putting ISH into D3 state. Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-06-26HID: remove NO_D3 flag when remove driverSong Hongyan1-0/+1
Remove the NO_D3 flag when remove the driver and let device enter into D3, it will save more power. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner4-36/+4
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-23HID: intel-ish-hid: Add Comet Lake PCI device IDSrinivas Pandruvada2-0/+2
Add Comet Lake PCI device ID to the supported device list. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-03-05Merge branch 'for-5.1/i2c-hid' into for-linusJiri Kosina1-18/+5
Fix dmesg flood for Elan touchpanels which are too slow to assert IRQ from Kai-Heng Feng
2019-02-15HID: intel-ish-hid: move doorbell writing before flushHong Liu1-2/+2
Reading of IPC_REG_ISH_HOST_FWSTS will flush both message register and doorbell. So move the doorbell write before reading of IPC_REG_ISH_HOST_FWSTS. Signed-off-by: Hong Liu <hong.liu@intel.com> Tested-by: Hongyan Song <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-02-15HID: intel-ish-hid: Optimize writing ipc message from queueHong Liu1-16/+3
Currently we are using one additional static variable and a spinlock to prevent contention of writing IPC messages to ISH hardware, which is not necessary. Once ISH is ready to accept new data, we can push new data to hardware. This pushing of new data is already protected by wr_processing_spinlock for contention, which is enough. So use this spinlock to check both readiness for accepting new data and once ready allow writing of ipc message from queue to ISH hardware. While here, cleaned up some space after return. Signed-off-by: Hong Liu <hong.liu@intel.com> Tested-by: Hongyan Song <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-24HID: intel-ish: ipc: handle PIMR before ish_wakeup also clear PISR ↵Song Hongyan1-3/+6
busy_clear bit Host driver should handle interrupt mask register earlier than wake up ish FW else there will be conditions when FW interrupt comes, host PIMR register still not set ready, so move the interrupt mask setting before ish_wakeup. Clear PISR busy_clear bit in ish_irq_handler. If not clear, there will be conditions host driver received a busy_clear interrupt (before the busy_clear mask bit is ready), it will return IRQ_NONE after check_generated_interrupt, the interrupt will never be cleared, causing the DEVICE not sending following IRQ. Since PISR clear should not be called for the CHV device we do this change. After the change, both ISH2HOST interrupt and busy_clear interrupt will be considered as interrupt from ISH, busy_clear interrupt will return IRQ_HANDLED from IPC_IS_BUSY check. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-12-19HID: intel-ish-hid: add MSI interrupt supportSong Hongyan1-1/+6
Now ish hid ipc only support sideband interrupt but on some platforms they use MSI interrupt. In order to make the interrupt type coverage all the scenario add single MSI interrupt support, it can match all interrupt types. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-10-23Merge branch 'for-4.20/i2c-hid' into for-linusJiri Kosina2-69/+38
- general cleanups of hid-i2c driver - SPIODEV device descriptor fixes
2018-09-24HID: intel-ish-hid: Enable Ice Lake mobileSrinivas Pandruvada2-0/+2
Added PCI ID for Ice Lake mobile platform. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-09-24HID: intel-ish-hid: using list_head for ipc write queueHong Liu1-18/+14
Currently wr_msg_ctl_info is used in ishtp_device just for list head purpose, using list_head directly can save ~150 bytes size for each replacement. Also this patch can save ~170 bytes of code size in intel-ish-ipc.ko. Signed-off-by: Hong Liu <hong.liu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-09-24HID: intel-ish-hid: use resource-managed apiHong Liu1-51/+24
Use resource-managed api to simplify error handling in probe and driver remove logic. With this patch, we can save ~170 bytes code size in intel-ish-ipc.ko. before: text data bss dec hex filename 11495 1568 72 13135 334f intel-ish-ipc.ko after: text data bss dec hex filename 11327 1568 72 12967 32a7 intel-ish-ipc.ko Signed-off-by: Hong Liu <hong.liu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-08-28HID: intel-ish-hid: Enable Sunrise Point-H ish driverAndreas Bosch2-0/+2
Added PCI ID for Sunrise Point-H ISH. Signed-off-by: Andreas Bosch <linux@progandy.de> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-08-02HID: intel_ish-hid: tx_buf memory leak on probe/removeAnton Vasilyev2-5/+6
ish_dev_init() allocates 512*176 bytes memory for tx_buf and stores it at &dev->wr_free_list_head.link list on ish_probe(). But there is no deallocation of this memory in ish_remove() and in ish_probe() error path. So current intel-ish-ipc provides 88 KB memory leak for each probe/release. The patch replaces kzalloc allocation by devm_kzalloc and removes ishtp_device *dev deallocation by kfree. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-08-02HID: intel-ish-hid: Prevent loading of driver on MehlowSrinivas Pandruvada1-0/+11
On Mehlow Xeon-E workstation, ISH PCI device is enabled but without ISH firmware. Here the ISH device PCI device id was reused for some non Linux storage drivers. So this was not done for enabling ISH. But this has a undesirable side effect for Linux. Here the ISH driver will be loaded via PCI enumeration and will try to do reset sequence. But reset sequence will wait till timeout as there is no real ISH firmware is present to take action. This delay will add to boot time of Linux (This platform will still continue to boot after this timeout). To avoid this boot delay we need to prevent loading of ISH drivers on this platform. So we need to have hack to avoid treating this device as ISH on this platform. To identify this workstation, we need some runtime method. Luckily there are special PCI id on this workstation to distinguish from the client version of this platform. On client version, the ISH is supported using same PCI device id. So this change look for the presence of PCI device IDs A309 and A30A and exit. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-06-20HID: intel_ish-hid: ipc: register more pm callbacks to support hibernationEven Xu1-15/+7
Current ISH driver only registers suspend/resume PM callbacks which don't support hibernation (suspend to disk). Basically after hiberation, the ISH can't resume properly and user may not see sensor events (for example: screen rotation may not work). User will not see a crash or panic or anything except the following message in log: hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device So this patch adds support for S4/hiberbation to ISH by using the SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend and resume functions will now be used for both suspend to RAM and hibernation. If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend and resume related functions won't be used, so mark them as __maybe_unused to clarify that this is the intended behavior, and remove #ifdefs for power management. Cc: stable@vger.kernel.org Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-23HID: intel-ish-hid: Enable Cannon Lake and Coffee Lake laptop/desktopSrinivas Pandruvada2-0/+2
Added PCI ID for Cannon Lake and Coffee Lake laptop/desktop skews. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-06-30HID: intel-ish-hid: Enable Gemini Lake ish driverSong Hongyan2-0/+2
Added PCI ID for Gemini Lake ISH. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-06-30HID: intel-ish-hid: Enable Cannon Lake ish driverSong Hongyan2-0/+2
Added PCI ID for Cannon Lake ISH. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-05-30HID: intel_ish-hid: convert timespec to ktime_tArnd Bergmann1-11/+4
The internal accounting uses 'timespec' based time stamps, which is slightly inefficient and also problematic once we get to the time_t overflow in 2038. When communicating to the firmware, we even get an open-coded 64-bit division that prevents the code from being build-tested on 32-bit architectures and is inefficient due to the double conversion from 64-bit nanoseconds to seconds+nanoseconds and then microseconds. This changes the code to use ktime_t instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-20Merge branches 'for-4.10/upstream-fixes', 'for-4.11/intel-ish', ↵Jiri Kosina3-12/+46
'for-4.11/mayflash', 'for-4.11/microsoft', 'for-4.11/rmi', 'for-4.11/upstream' and 'for-4.11/wacom' into for-linus
2017-02-08HID: intel-ish-hid: ipc: check FW status to distinguish ISH resume pathsEven Xu3-10/+44
For ISH resume, there are two paths, they need different way to handle: one where ISH is not powered off, in that case a simple resume message is enough, in other case we need a reset sequence. We can use ISH FW status to distinguish those two cases and handle them properly. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-02HID: intel-ish-hid: add printf attribute to print_log()Nicolas Iooss1-1/+2
Structure ishtp_device contains a logging function, print_log(), which formats some of its parameters using vsnprintf(). Add a __printf attribute to this function field (and to ish_event_tracer()) in order to detect at compile time issues related to the printf-like formatting. While at it, make format parameter a const pointer as print_log() is not supposed to modify it. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-19HID: intel-ish-hid: Remove unneeded linux/miscdevice.h includeCorentin Labbe1-1/+0
hid/intel-ish-hid does not use any miscdevice so this patch remove this unnecessary inclusion. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-14Merge branches 'for-4.10/asus', 'for-4.10/cp2112', ↵Jiri Kosina2-70/+61
'for-4.10/i2c-hid-nopower', 'for-4.10/intel-ish', 'for-4.10/mayflash', 'for-4.10/microsoft-surface-3', 'for-4.10/multitouch', 'for-4.10/sony', 'for-4.10/udraw-ps3', 'for-4.10/upstream' and 'for-4.10/wacom/generic' into for-linus
2016-11-16HID: intel-ish-hid: ipc: use msleep_interrupt() for waitEven Xu1-1/+3
set_current_task() must be called before schedule_timeout(), for this driver, in order to avoid incorrect usage, use msleep_interrupt() instead. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-16HID: intel-ish-hid: ipc: change timed_wait_for_timeout() to be a functionEven Xu2-48/+57
The macro timed_wait_for_timeout() only be used in one function, so move this marco from header file and change it to a function in ipc.c, where it is used. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-16HID: intel-ish-hid: ipc: remove unused macroEven Xu1-21/+0
The macro timed_wait_for() in utils.h isn't used in current ipc driver, so remove it for avoiding confusion. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: intel-ish-hid: initialize ts_format.reservedJiri Kosina1-0/+1
ts_format.reserved is not used anywhere yet, but the compiler generates a warning when the struct's (uninitialized) field is being copied around drivers/hid/intel-ish-hid/ipc/ipc.c: In function ‘write_ipc_from_queue’: drivers/hid/intel-ish-hid/ipc/ipc.c:316: warning: ‘ts_format.reserved’ may be used uninitialized in this function Avoid this by force-initializing the field to zero. Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: intel-ish-hid: request_irq failureSrinivas Pandruvada1-1/+1
On some platforms ISH interrupt is shared, which causes request_irq to fail. This requires IRQF_SHARED irq flag. But IRQF_NO_SUSPEND and IRQF_SHARED should not be used together, so removed IRQF_NO_SUSPEND flag. Anyway this driver doesn't require IRQF_NO_SUSPEND, as this interrupt is not required during "noirq" phases of suspending and resuming devices as well as during the time when nonboot CPUs are taken offline and brought back online. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: intel-ish-hid: Fix driver reinit failureEven Xu1-0/+15
When built as a module, modprobe followed by rmmod can fail because DMA was still active. So to fix this, DMA needs to be disabled during module exit. This change disables DMA during modules exit and change the ISH PCI device status to D3. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: intel-ish-hid: Move DMA disable code to new functionEven Xu1-10/+32
Add a new function ish_disable_dma() and move DMA disable operations here, so that this functionality can be reused. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: intel-ish-hid: consolidate ish wake up operationEven Xu1-19/+26
Same operations are done in ish_hw_start() and _ish_hw_reset() to wakeup ISH device. Consolidate them by introducing a new function ish_wakeup() and move the code there. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-03HID: intel-ish-hid: Fix !CONFIG_PM build warningBorislav Petkov1-2/+2
Fix drivers/hid/intel-ish-hid/ipc/pci-ish.c:247:12: warning: ‘ish_suspend’ defined but not used [-Wunused-function] static int ish_suspend(struct device *device) ^ drivers/hid/intel-ish-hid/ipc/pci-ish.c:282:12: warning: ‘ish_resume’ defined but not used [-Wunused-function] static int ish_resume(struct device *device) ^ by sticking them in the CONFIG_PM range too. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: linux-input@vger.kernel.org Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-29HID: intel-ish-hid: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-29HID: intel-ish-hid: use list_move_tail instead of list_del/list_add_tailWei Yongjun1-2/+1
Using list_move_tail() instead of list_del() + list_add_tail(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-17HID: intel-ish-hid: ipc layerSrinivas Pandruvada5-0/+1570
This layer is responsible for - Enumerating over PCI bus - Inform FW about host readiness - Provide HW interface to transport layer for control and messages - Interrupt handling and routing Original-author: Daniel Drubin <daniel.drubin@intel.com> Reviewed-and-tested-by: Ooi, Joyce <joyce.ooi@intel.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Rann Bar-On <rb6@duke.edu> Tested-by: Atri Bhattacharya <badshah400@aim.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 16:12:33 +0000