summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2012-01-09Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-51/+334
Driver specific changes Again, a lot of platforms have changes in here: pxa, samsung, omap, at91, imx, ... * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq() pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq() ARM: EXYNOS: Modified files for SPI consolidation work ARM: S5P64X0: Enable SDHCI support ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names ARM: S5P64X0: Add HSMMC setup for host Controller ARM: EXYNOS: Add USB OHCI support to ORIGEN board USB: Add Samsung Exynos OHCI diver ARM: EXYNOS: Add USB OHCI support to SMDKV310 board ARM: EXYNOS: Add USB OHCI device net: macb: fix build break with !CONFIG_OF i2c: tegra: Support DVC controller in device tree i2c: tegra: Add __devinit/exit to probe/remove net/at91_ether: use gpio_is_valid for phy IRQ line ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT ...
2012-01-09Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+72
Device tree conversions for samsung and tegra Both platforms had some initial device tree support, but this adds much more to actually make it usable. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN ARM: EXYNOS: Add Exynos4 device tree enabled board file rtc: rtc-s3c: Add device tree support input: samsung-keypad: Add device tree support ARM: S5PV210: Modify platform data for pl330 driver ARM: S5PC100: Modify platform data for pl330 driver ARM: S5P64x0: Modify platform data for pl330 driver ARM: EXYNOS: Add a alias for pdma clocks ARM: EXYNOS: Limit usage of pl330 device instance to non-dt build ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers DMA: PL330: Add device tree support ARM: EXYNOS: Modify platform data for pl330 driver DMA: PL330: Infer transfer direction from transfer request instead of platform data DMA: PL330: move filter function into driver serial: samsung: Fix build for non-Exynos4210 devices serial: samsung: add device tree support serial: samsung: merge probe() function from all SoC specific extensions serial: samsung: merge all SoC specific port reset functions ARM: SAMSUNG: register uart clocks to clock lookup list serial: samsung: remove all uses of get_clksrc and set_clksrc ... Fix up fairly trivial conflicts in arch/arm/mach-s3c2440/clock.c and drivers/tty/serial/Kconfig both due to just adding code close to changes.
2012-01-08Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (36 commits) mfd: Clearing events requires event registers to be writable for da9052-core mfd: Fix annotations in da9052-core gpiolib: Mark da9052 driver broken mfd: Declare da9052_regmap_config for the bus drivers MFD: DA9052/53 MFD core module add SPI support v2 MFD: DA9052/53 MFD core module regmap: Add irq_base accessor to regmap_irq regmap: Allow drivers to reinitialise the register cache at runtime regmap: Add trace event for successful cache reads regmap: Allow regmap_update_bits() users to detect changes regmap: Report if we actually handled an interrupt in regmap-irq regmap: Fix rbtreee build when not using debugfs regmap: Provide debugfs dump of the rbtree cache data regmap: Do debugfs init before cache init regmap: Suppress noop writes in regmap_update_bits() regmap: Remove indexed cache type regmap: Drop check whether a register is readable in regcache_read regmap: Properly round cache_word_size regmap: Add support for 10/14 register formating regmap: Try cached read before checking if a hardware read is possible ...
2012-01-08Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
2012-01-07Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds21-166/+128
Changes queued in gpio/next for the start of the 3.3 merge window * tag 'gpio-for-linus-20120104' of git://git.secretlab.ca/git/linux-2.6: gpio: Add decode of WM8994 GPIO configuration gpio: Convert GPIO drivers to module_platform_driver gpio: Fix typo in comment in Samsung driver gpio: Explicitly index samsung_gpio_cfgs gpio: Add Linus Walleij as gpio co-maintainer of: Add device tree selftests of: create of_phandle_args to simplify return of phandle parsing data gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags() gpio/microblaze: Eliminate duplication of of_get_named_gpio_flags() gpiolib: output basic details and consolidate gpio device drivers pch_gpio: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor pch_gpio: Support new device LAPIS Semiconductor ML7831 IOH spi/pl022: make the chip deselect handling thread safe spi/pl022: add support for pm_runtime autosuspend spi/pl022: disable the PL022 block when unused spi/pl022: move device disable to workqueue thread spi/pl022: skip default configuration before suspending spi/pl022: fix build warnings spi/pl022: only enable RX interrupts when TX is complete
2012-01-07Merge branch 'driver-core-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2012-01-06Merge branch 'amba-modalias' of ↵Linus Torvalds1-0/+2
git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: sound: aaci: Enable module alias autogeneration for AMBA drivers watchdog: sp805: Enable module alias autogeneration for AMBA drivers fbdev: amba: Enable module alias autogeneration for AMBA drivers serial: pl011: Enable module alias autogeneration for AMBA drivers serial: pl010: Enable module alias autogeneration for AMBA drivers spi: pl022: Enable module alias autogeneration for AMBA drivers rtc: pl031: Enable module alias autogeneration for AMBA drivers rtc: pl030: Enable module alias autogeneration for AMBA drivers mmc: mmci: Enable module alias autogeneration for AMBA drivers input: ambakmi: Enable module alias autogeneration for AMBA drivers gpio: pl061: Enable module alias autogeneration for AMBA drivers dmaengine: pl330: Enable module alias autogeneration for AMBA drivers dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers hwrng: nomadik: Enable module alias autogeneration for AMBA drivers ARM: amba: Auto-generate AMBA driver module aliases during modpost ARM: amba: Move definition of struct amba_id to mod_devicetable.h
2012-01-06Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman1-1/+1
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-02gpio: Add decode of WM8994 GPIO configurationMark Brown1-2/+77
For the human reader. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-01-02gpio: Convert GPIO drivers to module_platform_driverMark Brown11-128/+11
Where appropriate factor out some boilerplate code for platform device registration into module_platform_driver. Drivers that don't use the standard module_init initcall haven't been converted. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-01-02gpio: Fix typo in comment in Samsung driverMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-01-02gpio: Explicitly index samsung_gpio_cfgsMark Brown1-10/+19
Make it easier to follow the by number references into samsung_gpio_cfgs by putting the indexes into the code initialising the array, improving readability a bit. Ideally we wouldn't be using magic array indexes at all but this is easier than coming up with a better way. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-28Merge branch 'samsung/cleanup' into next/driversArnd Bergmann1-0/+72
Dependency for the samsung/drivers branch Conflicts: arch/arm/mach-exynos/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-12-27Merge branch 'v3.2-rc6' into next/driversArnd Bergmann4-23/+52
2011-12-27Merge branch 'omap/hwmod' into next/driversArnd Bergmann1-1/+1
This is needed as a dependency for omap/ehci. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-12-23gpio/samsung: Add device tree support for EXYNOS4Thomas Abraham1-0/+72
As gpio chips get registered, a device tree node which represents the gpio chip is searched and attached to it. A translate function is also provided to convert the gpio specifier into actual platform settings for pin function selection, pull up/down and driver strength settings. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> [kgene.kim@samsung.com: fixed build error] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-21driver-core: remove sysdev.h usage.Kay Sievers1-1/+1
The sysdev.h file should not be needed by any in-kernel code, so remove the .h file from these random files that seem to still want to include it. The sysdev code will be going away soon, so this include needs to be removed no matter what. Cc: Jiandong Zheng <jdzheng@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "Venkatesh Pallipadi Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2011-12-20gpiolib: Mark da9052 driver brokenMark Brown1-1/+1
The driver was merged prior to the MFD and won't build with the MFD. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-15gpio: Fix DA9052 GPIO build errors.Ashish Jangam1-13/+8
This patch is functionally tested on Samsung SMDKV6410. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> [grant.likely: don't create an unnecessary header file] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-13gpio: mpc8xxx: don't allow input-only pins to be output for MPC5121Wolfram Sang1-5/+13
Add a 5121-custom reject if an input-only pin is requested to be output (see 18.3.1.1 in the refman). Also, rewrite mach-specific quirk setup to consume less lines which scales better. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> [grant.likely: Fixed build error] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-13gpio-ml-ioh: Add the irq_disable/irq_enable hooks for ml-ioh irq chipFeng Tang1-0/+30
These hooks will be needed by the general disabl/enable_irq(); Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-13gpio-ml-ioh: fix a bug in the interrupt handlerFeng Tang1-1/+1
GPIO's irq action's dev_id is set to the first struct ioh_gpio chip, so when loop checking the 8 chips, the "chip" should be changed according. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-13gpio: pl061: drop extra check for NULL platform_dataRob Herring1-4/+0
In adding DT binding support, the check for NULL platform_data got added back in inadvertently, so remove it. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-12gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()Grant Likely1-1/+1
A large chunk of qe_pin_request() is unnecessarily cut-and-paste directly from of_get_named_gpio_flags(). This patch cuts out the duplicate code and replaces it with a call to of_get_gpio(). v2: fixed compile error due to missing gpio_to_chip() Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@kernel.crashing.org>
2011-12-12gpiolib: output basic details and consolidate gpio device driversGrant Likely8-16/+9
This patch adds a kernel message, containing GPIO range and device name on successful device registration, and removes duplicate messages from the following drivers: * gpio-adp5588 * gpio-bt8xx * gpio-cs5535 * gpio-janz-ttl * gpio-nomadik * gpio-pcf857x * gpio-xilinx * drivers/of/gpio.c Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> [grant.likely@secretlab.ca: squashed 2 patches together] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-12pch_gpio: Change company name OKI SEMICONDUCTOR to LAPIS SemiconductorTomoya MORINAGA1-3/+3
On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-12pch_gpio: Support new device LAPIS Semiconductor ML7831 IOHTomoya MORINAGA2-5/+7
ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-06Merge branch 'mxs/saif' into next/driversArnd Bergmann1-2/+2
Conflicts: drivers/net/ethernet/cadence/Kconfig
2011-12-05gpio: fix a build failure on KS8695 GPIOLinus Walleij1-1/+1
I screwed up by compiling that driver for the machine rather than the arch. Correcting this fixes the build error. Cc: Grant Likely <grant.likely@secretlab.ca> Reported-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-28gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'Paul Bolle1-1/+1
Commit af0c25c487 ("staging: remove obsoleted CS5535/CS5536 GPIO driver") dropped CS5535_GPIO. So this last reference to CS5535_GPIO has been an (inconsequential) nop since v3.1. Drop it too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23Merge branches 'drivers/macb-gem' and 'drivers/pxa-gpio' into next/driversArnd Bergmann2-32/+38
2011-11-22gpio: pl061: Enable module alias autogeneration for AMBA driversDave Martin1-0/+2
Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-11-21gpio: pca953x: Staticise pca953x_get_altdata()Mark Brown1-2/+2
It's not used outside of the driver so doesn't need to be exported, and sparse notices this and complains about it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-15Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-32/+38
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6: gpio: pca953x: propagate the errno from the chip_init functions gpio: pca953x: remove unneeded check for chip type gpio/omap: check return value from irq_alloc_generic_chip gpio/omap: replace MOD_REG_BIT macro with static inline
2011-11-15ARM: pxa: add clk support in gpio driverHaojian Zhuang1-1/+25
Support clk in gpio driver. There's no gpio clock in PXA25x and PXA27x. So use dummy clk instead. And move the gpio edge initialization into gpio driver for arch-mmp. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-15ARM: mmp: clear gpio edge detectHaojian Zhuang1-0/+4
Append code to clear gpio edge detect in gpio-pxa driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-15ARM: pxa: change gpio to platform deviceHaojian Zhuang3-11/+132
Remove most gpio macros and change gpio driver to platform driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: use little endian read write in gpio driverHaojian Zhuang1-34/+34
Remove __raw_readl()/__raw_writel(). Use readl_relaxed()/writel_relaxed() instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: recognize gpio number and typeHaojian Zhuang1-1/+40
Use cpuid to recognize the gpio number and type. CPU_PXA26x is the special case since we can't identify it by cpuid. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: rename gpio_to_irq and irq_to_gpioHaojian Zhuang1-4/+85
Avoid to define gpio_to_irq() and irq_to_gpio() for potential name confliction since multiple architecture will be built together. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: use chained interrupt for GPIO0 and GPIO1Haojian Zhuang1-0/+14
GPIO0 and GPIO1 are linked to unique interrupt line in PXA series, others are linked to another interrupt line. All GPIO are linked to one interrupt line in MMP series. Since gpio driver is shared between PXA series and MMP series, define GPIO0 and GPIO1 as chained interrupt chip. So we can move out gpio code from irq.c to gpio-pxa.c. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-11-08Merge branch 'for_3.2/gpio-cleanup' of ↵Grant Likely1-25/+34
git://gitorious.org/khilman/linux-omap-pm into gpio/merge
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds11-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-06Merge branch 'next' of ↵Linus Torvalds3-0/+407
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits) powerpc/p3060qds: Add support for P3060QDS board powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX powerpc/85xx: Make kexec to interate over online cpus powerpc/fsl_booke: Fix comment in head_fsl_booke.S powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver powerpc/86xx: Correct Gianfar support for GE boards powerpc/cpm: Clear muram before it is in use. drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager powerpc/fsl_msi: add support for "msi-address-64" property powerpc/85xx: Setup secondary cores PIR with hard SMP id powerpc/fsl-booke: Fix settlbcam for 64-bit powerpc/85xx: Adding DCSR node to dtsi device trees powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards powerpc/85xx: fix PHYS_64BIT selection for P1022DS powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map powerpc: respect mem= setting for early memory limit setup powerpc: Update corenet64_smp_defconfig powerpc: Update mpc85xx/corenet 32-bit defconfigs ... Fix up trivial conflicts in: - arch/powerpc/configs/40x/hcu4_defconfig removed stale file, edited elsewhere - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c: added opal and gelic drivers vs added ePAPR driver - drivers/tty/serial/8250.c moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support
2011-11-05Merge branch 'next/devel2' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds1-12/+36
* 'next/devel2' of git://git.linaro.org/people/arnd/arm-soc: (30 commits) ARM: mmp: register internal sram bank ARM: mmp: register audio sram bank ARM: mmp: add sram allocator gpio/samsung: Complain loudly if we don't know the SoC ARM: S3C64XX: Fix SoC identification for S3C64xx devices ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocks ARM: S3C24XX: Add devname for hsmmc1 pclk ARM: S3C24XX: use clk_get_rate to init fclk in common_setup_clocks ARM: S3C2443: Accommodate cpufreq frequency scheme in armdiv ARM: S3C2443: handle unset armdiv values gracefully ARM: S3C2443: Add get_rate operation for clk_armdiv ARM: S3C2416: Add comment describing the armdiv/armclk ARM: S3C2443: Move clk_arm and clk_armdiv to common code ARM: S3C24XX: Add infrastructure to transmit armdiv to common code ARM: S3C2416: Add armdiv_mask constant ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board ARM: EXYNOS4: Enable MFC on ORIGEN ARM: SAMSUNG: Add support s3c2416-adc for S3C2416/S3C2450 ARM: SAMSUNG: Add support s3c2443-adc for S3C2443 ARM: SAMSUNG: Allow overriding of adc device name for S3C24XX ...
2011-11-05Merge branch 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds7-1252/+2689
* 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-soc: (79 commits) ARM: SAMSUNG: Move fimc plat. device from board files to plat-samsung ARM: SAMSUNG: Cleanup resources by using macro ARM: SAMSUNG: Cleanup plat-samsung/devs.c and devs.h ARM: S5P: To merge devs.c files to one devs.c ARM: S3C64XX: To merge devs.c files to one devs.c ARM: S3C24XX: To merge s3c24xx devs.c files to one devs.c ARM: S5P64X0: Add Power Management support ARM: S5P: Make the sleep code common for S5P series SoCs ARM: S5P: Make the common S5P PM code conditionally compile ARM: SAMSUNG: Move S5P header files to plat-samsung ARM: SAMSUNG: Move S3C24XX header files to plat-samsung ARM: SAMSUNG: Moving each SoC support header files ARM: SAMSUNG: Consolidate plat/pll.h ARM: SAMSUNG: Consolidate plat/pwm-clock.h ARM: SAMSUNG: Cleanup mach/clkdev.h ARM: SAMSUNG: remove sdhci default configuration setup platform helper ARM: EXYNOS4: Add FIMC device on SMDKV310 board ARM: EXYNOS4: Add header file protection macros ARM: EXYNOS4: Add usb ehci device to the SMDKV310 ARM: S3C2443: Add hsspi-clock from pclk and rename S3C2443 hsspi sclk ... Fix up conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} ARM_CPU_SUSPEND, various random device tables (gah!) - drivers/gpio/Makefile sa1100 gpio added, samsung gpio drivers merged
2011-11-03powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driverFelix Radensky1-0/+2
Interrupt handler in MPC8xxx GPIO driver is missing the call to PIC EOI (end of interrupt) handler. As a result, at least on 85XX systems, GPIO interrupt is delivered only once. This patch adds the missing EOI call. Tested on custom P1022 board. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-03powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driverKumar Gala1-0/+1
Support MPC85xx platforms outside of MPC8572/MPC8536. The MPC8572/MPC8536 have an erratum that is worked around based on having "fsl,mpc8572-gpio" in the compatiable list. All other MPC85xx SoCs don't require this workaround and thus utilize the 'fsl,pq3-gpio' compatiable. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-03Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6Linus Torvalds1-2/+1
* 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits) mfd: Fix missing abx500 header file updates mfd: Add missing <linux/io.h> include to intel_msic x86, mrst: add platform support for MSIC MFD driver mfd: Expose TurnOnStatus in ab8500 sysfs mfd: Remove support for early drop ab8500 chip mfd: Add support for ab8500 v3.3 mfd: Add ab8500 interrupt disable hook mfd: Convert db8500-prcmu panic() into pr_crit() mfd: Refactor db8500-prcmu request_clock() function mfd: Rename db8500-prcmu init function mfd: Fix db5500-prcmu defines mfd: db8500-prcmu voltage domain consumers additions mfd: db8500-prcmu reset code retrieval mfd: db8500-prcmu tweak for modem wakeup mfd: Add db8500-pcmu watchdog accessor functions for watchdog mfd: hwacc power state db8500-prcmu accessor mfd: Add db8500-prcmu accessors for PLL and SGA clock mfd: Move to the new db500 PRCMU API mfd: Create a common interface for dbx500 PRCMU drivers mfd: Initialize DB8500 PRCMU regs ... Fix up trivial conflicts in arch/arm/mach-imx/mach-mx31moboard.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-u300/include/mach/irqs.h drivers/mfd/wm831x-spi.c
2011-11-01Merge branch 'next/devel' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds1-48/+95
* 'next/devel' of git://git.linaro.org/people/arnd/arm-soc: (50 commits) ARM: tegra: update defconfig arm/tegra: Harmony: Configure PMC for low-level interrupts arm/tegra: device tree support for ventana board arm/tegra: add support for ventana pinmuxing arm/tegra: prepare Seaboard pinmux code for derived boards arm/tegra: pinmux: ioremap registers gpio/tegra: Convert to a platform device arm/tegra: Convert pinmux driver to a platform device arm/dt: Tegra: Add pinmux node to tegra20.dtsi arm/tegra: Prep boards for gpio/pinmux conversion to pdevs ARM: mx5: fix clock usage for suspend ARM i.MX entry-macro.S: remove now unused code ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER ARM i.MX tzic: add handle_irq function ARM i.MX avic: add handle_irq function ARM: mx25: Add the missing IIM base definition ARM i.MX avic: convert to use generic irq chip mx31moboard: Add poweroff support ARM: mach-qong: Add watchdog support ARM: davinci: AM18x: Add wl1271/wlan support ... Fix up conflicts in: arch/arm/mach-at91/at91sam9g45.c arch/arm/mach-mx5/devices-imx53.h arch/arm/plat-mxc/include/mach/memory.h
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 11:58:59 +0000