summaryrefslogtreecommitdiff
path: root/drivers/firmware
AgeCommit message (Collapse)AuthorFilesLines
2020-02-08Merge tag 'armsoc-drivers' of ↵Linus Torvalds21-1535/+1371
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-02-04Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge more updates from Andrew Morton: "The rest of MM and the rest of everything else: hotfixes, ipc, misc, procfs, lib, cleanups, arm" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (67 commits) ARM: dma-api: fix max_pfn off-by-one error in __dma_supported() treewide: remove redundant IS_ERR() before error code check include/linux/cpumask.h: don't calculate length of the input string lib: new testcases for bitmap_parse{_user} lib: rework bitmap_parse() lib: make bitmap_parse_user a wrapper on bitmap_parse lib: add test for bitmap_parse() bitops: more BITS_TO_* macros lib/string: add strnchrnul() proc: convert everything to "struct proc_ops" proc: decouple proc from VFS with "struct proc_ops" asm-generic/tlb: provide MMU_GATHER_TABLE_FREE asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE asm-generic/tlb: rename HAVE_RCU_TABLE_FREE asm-generic/tlb: add missing CONFIG symbol asm-gemeric/tlb: remove stray function declarations asm-generic/tlb: avoid potential double flush mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case ...
2020-02-04arm64: mm: convert mm/dump.c to use walk_page_range()Steven Price1-1/+1
Now walk_page_range() can walk kernel page tables, we can switch the arm64 ptdump code over to using it, simplifying the code. Link: http://lkml.kernel.org/r/20191218162402.45610-22-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-03Merge branch 'stable/for-linus-5.6' of ↵Linus Torvalds1-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft Pull ibft update from Konrad Rzeszutek Wilk: "Adhere to the iBFT spec and extend the structure to handle more than two NICs" * 'stable/for-linus-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft: iscsi_ibft: Don't limits Targets and NICs to two
2020-02-03Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There are a few changes to the core framework this time around, in addition to the normal collection of driver updates to support new SoCs, fix incorrect data, and convert various drivers to clk_hw based APIs. In the core, we allow clk_ops::init() to return an error code now so that we can fail clk registration if the callback does something like fail to allocate memory. We also add a new "terminate" clk_op so that things done in clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now when critical clks fail to enable and we support changing clk rates and enable/disable state through debugfs when developers compile the kernel themselves. On the driver front, we get support for what seems like a lot of Qualcomm and NXP SoCs given that those vendors dominate the diffstat. There are a couple new drivers for Xilinx and Amlogic SoCs too. The updates are all small things like fixing the way glitch free muxes switch parents, avoiding div-by-zero problems, or fixing data like parent names. See the updates section below for more details. Finally, the "basic" clk types have been converted to support specifying parents with clk_hw pointers. This work includes an overhaul of the fixed-rate clk type to be more modern by using clk_hw APIs. Core: - Let clk_ops::init() return an error code - Add a clk_ops::terminate() callback to undo clk_ops::init() - Warn about critical clks that fail to enable or prepare - Support dangerous debugfs actions on clks with dead code New Drivers: - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Add a driver for BCLK of Freescale SAI cores - Add cam, vpe and sgx clock support for TI dra7 - Add aess clock support for TI omap5 - Enable clks for CPUfreq on Allwinner A64 SoCs - Add Amlogic meson8b DDR clock controller - Add input clocks to Amlogic meson8b controllers - Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2 - i.MX8MP clk driver support Updates: - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs - Detect more PRMCU variants in ux500 driver - Adjust the composite clk type to new way of describing clk parents - Fixes for clk controllers on qcom msm8998 SoCs - Fix gmac main clock for TI dra7 - Move TI dra7-atl clock header to correct location - Fix hidden node name dependency on TI clkctrl clocks - Fix Amlogic meson8b mali clock update using the glitch free mux - Fix Amlogic pll driver division by zero at init - Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols - Switch more i.MX clk drivers to clk_hw based APIs - Disable non-functional divider between pll4_audio_div and pll4_post_div on imx6q - Fix watchdog2 clock name typo in imx7ulp clock driver - Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs - Suppress bind attrs for i.MX8M clock driver - Add a big comment in imx8qxp-lpcg driver to tell why devm_platform_ioremap_resource() shouldn't be used for the driver - A correction on i.MX8MN usb1_ctrl parent clock setting" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits) dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id clk: ls1028a: Fix warning on clamp() usage clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock ...
2020-01-29Merge tag 'char-misc-5.6-rc1' of ↵Linus Torvalds3-2/+34
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc/whatever driver changes for 5.6-rc1 Included in here are loads of things from a variety of different driver subsystems: - soundwire updates - binder updates - nvmem updates - firmware drivers updates - extcon driver updates - various misc driver updates - fpga driver updates - interconnect subsystem and driver updates - bus driver updates - uio driver updates - mei driver updates - w1 driver cleanups - various other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits) mei: me: add jasper point DID char: hpet: Use flexible-array member binder: fix log spam for existing debugfs file creation. mei: me: add comet point (lake) H device ids nvmem: add QTI SDAM driver dt-bindings: nvmem: add binding for QTI SPMI SDAM dt-bindings: imx-ocotp: Add i.MX8MP compatible dt-bindings: soundwire: fix example soundwire: cadence: fix kernel-doc parameter descriptions soundwire: intel: report slave_ids for each link to SOF driver siox: Use the correct style for SPDX License Identifier w1: omap-hdq: Simplify driver with PM runtime autosuspend firmware: stratix10-svc: Remove unneeded semicolon firmware: google: Probe for a GSMI handler in firmware firmware: google: Unregister driver_info on failure and exit in gsmi firmware: google: Release devices before unregistering the bus slimbus: qcom: add missed clk_disable_unprepare in remove slimbus: Use the correct style for SPDX License Identifier slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel() dt-bindings: SLIMBus: add slim devices optional properties ...
2020-01-28Merge branch 'efi-core-for-linus' of ↵Linus Torvalds17-583/+704
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "The main changes in this cycle were: - Cleanup of the GOP [graphics output] handling code in the EFI stub - Complete refactoring of the mixed mode handling in the x86 EFI stub - Overhaul of the x86 EFI boot/runtime code - Increase robustness for mixed mode code - Add the ability to disable DMA at the root port level in the EFI stub - Get rid of RWX mappings in the EFI memory map and page tables, where possible - Move the support code for the old EFI memory mapping style into its only user, the SGI UV1+ support code. - plus misc fixes, updates, smaller cleanups. ... and due to interactions with the RWX changes, another round of PAT cleanups make a guest appearance via the EFI tree - with no side effects intended" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) efi/x86: Disable instrumentation in the EFI runtime handling code efi/libstub/x86: Fix EFI server boot failure efi/x86: Disallow efi=old_map in mixed mode x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld efi/x86: avoid KASAN false positives when accessing the 1: 1 mapping efi: Fix handling of multiple efi_fake_mem= entries efi: Fix efi_memmap_alloc() leaks efi: Add tracking for dynamically allocated memmaps efi: Add a flags parameter to efi_memory_map efi: Fix comment for efi_mem_type() wrt absent physical addresses efi/arm: Defer probe of PCIe backed efifb on DT systems efi/x86: Limit EFI old memory map to SGI UV machines efi/x86: Avoid RWX mappings for all of DRAM efi/x86: Don't map the entire kernel text RW for mixed mode x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd efi/libstub/x86: Fix unused-variable warning efi/libstub/x86: Use mandatory 16-byte stack alignment in mixed mode efi/libstub/x86: Use const attribute for efi_is_64bit() efi: Allow disabling PCI busmastering on bridges during boot efi/x86: Allow translating 64-bit arguments for mixed mode calls ...
2020-01-28Merge branch 'core-headers-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull header cleanup from Ingo Molnar: "This is a treewide cleanup, mostly (but not exclusively) with x86 impact, which breaks implicit dependencies on the asm/realtime.h header and finally removes it from asm/acpi.h" * 'core-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ACPI/sleep: Move acpi_get_wakeup_address() into sleep.c, remove <asm/realmode.h> from <asm/acpi.h> ACPI/sleep: Convert acpi_wakeup_address into a function x86/ACPI/sleep: Remove an unnecessary include of asm/realmode.h ASoC: Intel: Skylake: Explicitly include linux/io.h for virt_to_phys() vmw_balloon: Explicitly include linux/io.h for virt_to_phys() virt: vbox: Explicitly include linux/io.h to pick up various defs efi/capsule-loader: Explicitly include linux/io.h for page_to_phys() perf/x86/intel: Explicitly include asm/io.h to use virt_to_phys() x86/kprobes: Explicitly include vmalloc.h for set_vm_flush_reset_perms() x86/ftrace: Explicitly include vmalloc.h for set_vm_flush_reset_perms() x86/boot: Explicitly include realmode.h to handle RM reservations x86/efi: Explicitly include realmode.h to handle RM trampoline quirk x86/platform/intel/quark: Explicitly include linux/io.h for virt_to_phys() x86/setup: Enhance the comments x86/setup: Clean up the header portion of setup.c
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds1-1/+1
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-23clk: zynqmp: Warn user if clock user are more than allowedRajan Vaja1-0/+2
Warn user if clock is used by more than allowed devices. This check is done by firmware and returns respective error code. Upon receiving error code for excessive user, warn user for the same. This change is done to restrict VPLL use count. It is assumed that VPLL is used by one user only. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-4-git-send-email-rajan.vaja@xilinx.com Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-22Merge 5.5-rc7 into char-misc-nextGreg Kroah-Hartman2-12/+10
We need the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-21Merge tag 'zynqmp-soc-for-v5.6' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson1-0/+43
arm/drivers arm64: soc: ZynqMP SoC changes for v5.6 - Extend firmware interface for feature checking - Use mailbox for communication with firmware for power management * tag 'zynqmp-soc-for-v5.6' of https://github.com/Xilinx/linux-xlnx: drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: firmware: xilinx: Add support for feature check Link: https://lore.kernel.org/r/f6fb26f8-b00d-a3e8-bf7d-c7ff2a8483b1@monstr.eu Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-20efi: Fix handling of multiple efi_fake_mem= entriesDan Williams2-16/+17
Dave noticed that when specifying multiple efi_fake_mem= entries only the last entry was successfully being reflected in the efi memory map. This is due to the fact that the efi_memmap_insert() is being called multiple times, but on successive invocations the insertion should be applied to the last new memmap rather than the original map at efi_fake_memmap() entry. Rework efi_fake_memmap() to install the new memory map after each efi_fake_mem= entry is parsed. This also fixes an issue in efi_fake_memmap() that caused it to litter emtpy entries into the end of the efi memory map. An empty entry causes efi_memmap_insert() to attempt more memmap splits / copies than efi_memmap_split_count() accounted for when sizing the new map. When that happens efi_memmap_insert() may overrun its allocation, and if you are lucky will spill over to an unmapped page leading to crash signature like the following rather than silent corruption: BUG: unable to handle page fault for address: ffffffffff281000 [..] RIP: 0010:efi_memmap_insert+0x11d/0x191 [..] Call Trace: ? bgrt_init+0xbe/0xbe ? efi_arch_mem_reserve+0x1cb/0x228 ? acpi_parse_bgrt+0xa/0xd ? acpi_table_parse+0x86/0xb8 ? acpi_boot_init+0x494/0x4e3 ? acpi_parse_x2apic+0x87/0x87 ? setup_acpi_sci+0xa2/0xa2 ? setup_arch+0x8db/0x9e1 ? start_kernel+0x6a/0x547 ? secondary_startup_64+0xb6/0xc0 Commit af1648984828 "x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage" introduced more occurrences where efi_memmap_insert() is invoked after an efi_fake_mem= configuration has been parsed. Previously the side effects of vestigial empty entries were benign, but with commit af1648984828 that follow-on efi_memmap_insert() invocation triggers efi_memmap_insert() overruns. Reported-by: Dave Young <dyoung@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20191231014630.GA24942@dhcp-128-65.nay.redhat.com Link: https://lore.kernel.org/r/20200113172245.27925-14-ardb@kernel.org
2020-01-20efi: Fix efi_memmap_alloc() leaksDan Williams1-0/+25
With efi_fake_memmap() and efi_arch_mem_reserve() the efi table may be updated and replaced multiple times. When that happens a previous dynamically allocated efi memory map can be garbage collected. Use the new EFI_MEMMAP_{SLAB,MEMBLOCK} flags to detect when a dynamically allocated memory map is being replaced. Debug statements in efi_memmap_free() reveal: efi: __efi_memmap_free:37: phys: 0x23ffdd580 size: 2688 flags: 0x2 efi: __efi_memmap_free:37: phys: 0x9db00 size: 2640 flags: 0x2 efi: __efi_memmap_free:37: phys: 0x9e580 size: 2640 flags: 0x2 ...a savings of 7968 bytes on a qemu boot with 2 entries specified to efi_fake_mem=. [ ardb: added a comment to clarify that efi_memmap_free() does nothing when called from efi_clean_memmap(), i.e., with data->flags == 0x0 ] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200113172245.27925-13-ardb@kernel.org
2020-01-20efi: Add tracking for dynamically allocated memmapsDan Williams2-29/+32
In preparation for fixing efi_memmap_alloc() leaks, add support for recording whether the memmap was dynamically allocated from slab, memblock, or is the original physical memmap provided by the platform. Given this tracking is established in efi_memmap_alloc() and needs to be carried to efi_memmap_install(), use 'struct efi_memory_map_data' to convey the flags. Some small cleanups result from this reorganization, specifically the removal of local variables for 'phys' and 'size' that are already tracked in @data. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200113172245.27925-12-ardb@kernel.org
2020-01-20efi: Add a flags parameter to efi_memory_mapDan Williams1-14/+17
In preparation for garbage collecting dynamically allocated EFI memory maps, where the allocation method of memblock vs slab needs to be recalled, convert the existing 'late' flag into a 'flags' bitmask. Arrange for the flag to be passed via 'struct efi_memory_map_data'. This structure grows additional flags in follow-on changes. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200113172245.27925-11-ardb@kernel.org
2020-01-20efi: Fix comment for efi_mem_type() wrt absent physical addressesAnshuman Khandual1-1/+1
A previous commit f99afd08a45f ("efi: Update efi_mem_type() to return an error rather than 0") changed the return value from EFI_RESERVED_TYPE to -EINVAL when the searched physical address is not present in any memory descriptor. But the comment preceding the function never changed. Let's change the comment now to reflect the new return value -EINVAL. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200113172245.27925-10-ardb@kernel.org
2020-01-20efi/arm: Defer probe of PCIe backed efifb on DT systemsArd Biesheuvel1-4/+103
The new of_devlink support breaks PCIe probing on ARM platforms booting via UEFI if the firmware exposes a EFI framebuffer that is backed by a PCI device. The reason is that the probing order gets reversed, resulting in a resource conflict on the framebuffer memory window when the PCIe probes last, causing it to give up entirely. Given that we rely on PCI quirks to deal with EFI framebuffers that get moved around in memory, we cannot simply drop the memory reservation, so instead, let's use the device link infrastructure to register this dependency, and force the probing to occur in the expected order. Co-developed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200113172245.27925-9-ardb@kernel.org
2020-01-18Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds2-12/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Three EFI fixes: - Fix a slow-boot-scrolling regression but making sure we use WC for EFI earlycon framebuffer mappings on x86 - Fix a mixed EFI mode boot crash - Disable paging explicitly before entering startup_32() in mixed mode bootup" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efistub: Disable paging at mixed mode entry efi/libstub/random: Initialize pointer variables to zero for mixed mode efi/earlycon: Fix write-combine mapping on x86
2020-01-16Merge tag 'qcom-drivers-for-5.6' of ↵Olof Johansson8-1524/+1164
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.6 * SCM major refactoring and cleanup * Properly flag active only power domains as active only * Add SC7180 and SM8150 RPMH power domains * Return EPROBE_DEFER from QMI if packet family is not yet available * tag 'qcom-drivers-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits) firmware: qcom_scm: Dynamically support SMCCC and legacy conventions firmware: qcom_scm: Remove thin wrappers firmware: qcom_scm: Order functions, definitions by service/command firmware: qcom_scm-32: Add device argument to atomic calls firmware: qcom_scm-32: Create common legacy atomic call firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls firmware: qcom_scm-32: Add funcnum IDs firmware: qcom_scm-32: Use SMC arch wrappers firmware: qcom_scm-64: Improve SMC convention detection firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc firmware: qcom_scm-64: Add SCM results struct firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc firmware: qcom_scm-64: Make SMC macros less magical firmware: qcom_scm: Remove unused qcom_scm_get_version firmware: qcom_scm: Apply consistent naming scheme to command IDs firmware: qcom_scm: Rename macros and structures soc: qcom: rpmhpd: Set 'active_only' for active only power domains firmware: scm: Add stubs for OCMEM and restore_sec_cfg_available dt-bindings: power: rpmpd: Convert rpmpd bindings to yaml ... Link: https://lore.kernel.org/r/20200113204405.GD3325@yoga Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'imx-driver-5.6' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX driver changes for 5.6: - Add i.MX8MP SoC driver support. - Allow IMX DSP Protocol driver to be built as module. - Add COMPILE_TEST for IMX_SCU_SOC driver to increase build coverage. - Print SoC type and revision in i.MX8 SoC driver, as this is useful information to have when looking through boot log. * tag 'imx-driver-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: firmware: imx: Allow IMX DSP to be selected as module soc: imx: Enable compile testing of IMX_SCU_SOC soc: imx: Add i.MX8MP SoC driver support soc: imx8: print SoC type and revision Link: https://lore.kernel.org/r/20200113034006.17430-1-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'mvebu-drivers-5.6-1' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson1-1/+1
arm/drivers mvebu drivers for 5.6 (part 1) - Various cleanup on the following drivers: - Turris Mox rWTM firmware - Moxtet bus - Armada 37xx rWTM mailbox - Marvell EBU Device Bus * tag 'mvebu-drivers-5.6-1' of git://git.infradead.org/linux-mvebu: mailbox: armada-37xx-rwtm: convert to devm_platform_ioremap_resource memory: mvebu-devbus: convert to devm_platform_ioremap_resource bus: moxtet: declare moxtet_bus_type as static firmware: turris-mox-rwtm: small white space cleanup Link: https://lore.kernel.org/r/877e1x3nxc.fsf@FE-laptop Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-14firmware: stratix10-svc: Remove unneeded semicolonzhengbin1-2/+2
Fixes coccicheck warning: drivers/firmware/stratix10-svc.c:271:2-3: Unneeded semicolon drivers/firmware/stratix10-svc.c:515:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Link: https://lore.kernel.org/r/1576465378-11109-1-git-send-email-zhengbin13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14firmware: google: Probe for a GSMI handler in firmwareArthur Heymans1-0/+19
Currently this driver is loaded if the DMI string matches coreboot and has a proper smi_command in the ACPI FADT table, but a GSMI handler in SMM is an optional feature in coreboot. So probe for a SMM GSMI handler before initializing the driver. If the smihandler leaves the calling argument in %eax in the SMM save state untouched that generally means the is no handler for GSMI. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Link: https://lore.kernel.org/r/20191118101934.22526-4-patrick.rudolph@9elements.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14firmware: google: Unregister driver_info on failure and exit in gsmiArthur Heymans1-0/+6
Fix a bug where the kernel module couldn't be loaded after unloading, as the platform driver wasn't released on exit. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Link: https://lore.kernel.org/r/20191118101934.22526-3-patrick.rudolph@9elements.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14firmware: google: Release devices before unregistering the busPatrick Rudolph1-0/+7
Fix a bug where the kernel module can't be loaded after it has been unloaded as the devices are still present and conflicting with the to be created coreboot devices. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Link: https://lore.kernel.org/r/20191118101934.22526-2-patrick.rudolph@9elements.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12iscsi_ibft: Don't limits Targets and NICs to twoLubomir Rintel1-4/+5
According to iSCSI Boot Firmware Table Version 1.03 [1], the length of the control table is ">= 18", where the optional expansion structure pointer follow the mandatory ones. This allows for more than two NICs and Targets. [1] ftp://ftp.software.ibm.com/systems/support/bladecenter/iscsi_boot_firmware_table_v1.03.pdf Let's enforce the minimum length of the control structure instead instead of limiting it to the smallest allowed size. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Konrad Rzeszutek Wilk <konrad@darnok.org>
2020-01-10efi: Allow disabling PCI busmastering on bridges during bootMatthew Garrett4-1/+152
Add an option to disable the busmaster bit in the control register on all PCI bridges before calling ExitBootServices() and passing control to the runtime kernel. System firmware may configure the IOMMU to prevent malicious PCI devices from being able to attack the OS via DMA. However, since firmware can't guarantee that the OS is IOMMU-aware, it will tear down IOMMU configuration when ExitBootServices() is called. This leaves a window between where a hostile device could still cause damage before Linux configures the IOMMU again. If CONFIG_EFI_DISABLE_PCI_DMA is enabled or "efi=disable_early_pci_dma" is passed on the command line, the EFI stub will clear the busmaster bit on all PCI bridges before ExitBootServices() is called. This will prevent any malicious PCI devices from being able to perform DMA until the kernel reenables busmastering after configuring the IOMMU. This option may cause failures with some poorly behaved hardware and should not be enabled without testing. The kernel commandline options "efi=disable_early_pci_dma" or "efi=no_disable_early_pci_dma" may be used to override the default. Note that PCI devices downstream from PCI bridges are disconnected from their drivers first, using the UEFI driver model API, so that DMA can be disabled safely at the bridge level. [ardb: disconnect PCI I/O handles first, as suggested by Arvind] Co-developed-by: Matthew Garrett <mjg59@google.com> Signed-off-by: Matthew Garrett <mjg59@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: Matthew Garrett <matthewgarrett@google.com> Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20200103113953.9571-18-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-10efi/x86: Allow translating 64-bit arguments for mixed mode callsArvind Sankar1-4/+1
Introduce the ability to define macros to perform argument translation for the calls that need it, and define them for the boot services that we currently use. When calling 32-bit firmware methods in mixed mode, all output parameters that are 32-bit according to the firmware, but 64-bit in the kernel (ie OUT UINTN * or OUT VOID **) must be initialized in the kernel, or the upper 32 bits may contain garbage. Define macros that zero out the upper 32 bits of the output before invoking the firmware method. When a 32-bit EFI call takes 64-bit arguments, the mixed-mode call must push the two 32-bit halves as separate arguments onto the stack. This can be achieved by splitting the argument into its two halves when calling the assembler thunk. Define a macro to do this for the free_pages boot service. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Matthew Garrett <mjg59@google.com> Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20200103113953.9571-17-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-10Merge branch 'linus' into efi/core, to pick up fixesIngo Molnar1-1/+0
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-09firmware: imx: Allow IMX DSP to be selected as moduleDaniel Baluta1-1/+1
IMX DSP is only needed by SOF or any other module that wants to communicate with the DSP. When SOF is build as a module IMX DSP is forced to be built inside the kernel image. This is not optimal, so allow IMX DSP to be built as a module. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-08Merge tag 'cpuidle_psci-v5.5-rc4' of ↵Olof Johansson5-65/+104
git://git.linaro.org/people/ulf.hansson/linux-pm into arm/drivers Initial support for hierarchical CPU arrangement, managed by PSCI and its corresponding cpuidle driver. This support is based upon using the generic PM domain, which already supports devices belonging to CPUs. Finally, these is a DTS patch that enables the hierarchical topology to be used for the Qcom 410c Dragonboard, which supports the PSCI OS-initiated mode. * tag 'cpuidle_psci-v5.5-rc4' of git://git.linaro.org/people/ulf.hansson/linux-pm: (611 commits) arm64: dts: Convert to the hierarchical CPU topology layout for MSM8916 cpuidle: psci: Add support for PM domains by using genpd PM / Domains: Introduce a genpd OF helper that removes a subdomain cpuidle: psci: Support CPU hotplug for the hierarchical model cpuidle: psci: Manage runtime PM in the idle path cpuidle: psci: Prepare to use OS initiated suspend mode via PM domains cpuidle: psci: Attach CPU devices to their PM domains cpuidle: psci: Add a helper to attach a CPU to its PM domain cpuidle: psci: Support hierarchical CPU idle states cpuidle: psci: Simplify OF parsing of CPU idle state nodes cpuidle: dt: Support hierarchical CPU idle states of: base: Add of_get_cpu_state_node() to get idle states for a CPU node firmware: psci: Export functions to manage the OSI mode dt: psci: Update DT bindings to support hierarchical PSCI states cpuidle: psci: Align psci_power_state count with idle state count Linux 5.5-rc4 locks: print unsigned ino in /proc/locks riscv: export flush_icache_all to modules riscv: reject invalid syscalls below -1 riscv: fix compile failure with EXPORT_SYMBOL() & !MMU ... Link: https://lore.kernel.org/r/20200102160820.3572-1-ulf.hansson@linaro.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-08firmware: turris-mox-rwtm: small white space cleanupDan Carpenter1-1/+1
This patch deletes a stray tab. Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: Colin King <colin.king@canonical.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-01-07firmware: qcom_scm: Dynamically support SMCCC and legacy conventionsElliot Berman6-135/+176
Dynamically support SMCCCC and legacy conventions by detecting which convention to use at runtime. qcom_scm_call_atomic and qcom_scm_call can then be moved in qcom_scm.c and use underlying convention backend as appropriate. Thus, rename qcom_scm-64,-32 to reflect that they are backends for -smc and -legacy, respectively. Also add support for making SCM calls earlier than when SCM driver probes to support use cases such as qcom_scm_set_cold_boot_addr. Support is added by lazily initializing the convention and guarding the query with a spin lock. The limitation of these early SCM calls is that they cannot use DMA, as in the case of >4 arguments for SMC convention and any non-atomic call for legacy convention. Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-18-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm: Remove thin wrappersElliot Berman4-948/+428
qcom_scm-32 and qcom_scm-64 implementations are nearly identical, so make qcom_scm_call and qcom_scm_call_atomic unique to each and the SCM descriptor creation common to each. There are the following catches: - __qcom_scm_is_call_available is still in each -32,-64 implementation as the argument is unique to each convention - For some functions, only one implementation was provided in -32 or -64. The actual implementation was moved into qcom_scm.c - io_writel and io_readl in -64 were non-atomic calls and in -32 they were. Atomic is the better option, so use it. Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-17-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm: Order functions, definitions by service/commandElliot Berman2-249/+247
Definitions throughout qcom_scm are loosely grouped and loosely ordered. Sort all the functions/definitions by service ID/command ID to improve sanity when needing to add new functionality to this driver. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-16-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm-32: Add device argument to atomic callsElliot Berman4-14/+19
Add unused "device" parameter to reduce merge friction between SMCCC and legacy based conventions in an upcoming patch. Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-15-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm-32: Create common legacy atomic callElliot Berman1-38/+68
Per [1], legacy calling convention supports up to 5 arguments and 3 return values. Create one function to support this combination, and remove the original "atomic1" and "atomic2" variants for 1 and 2 arguments. This more closely aligns scm_legacy implementation with scm_smc implementation. [1]: https://source.codeaurora.org/quic/la/kernel/msm-4.9/tree/drivers/soc/qcom/scm.c?h=kernel.lnx.4.9.r28-rel#n1024 Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-14-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_callElliot Berman1-12/+24
Move SMCCC register filling to qcom_scm_call so that __scm_legacy_do only needs to concern itself with retry mechanism. qcom_scm_call then is responsible for translating qcom_scm_desc into the complete set of register arguments and passing onto qcom_scm_call_do. Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-13-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic callsElliot Berman1-149/+218
Use qcom_scm_desc in non-atomic calls to remove legacy convention details from every SCM wrapper function. Implementations were copied from qcom_scm-64 and are functionally equivalent when using the qcom_scm_desc and qcom_scm_res structs. Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-12-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm-32: Add funcnum IDsElliot Berman1-3/+5
Add SCM_LEGACY_FNID macro to qcom_scm-32. Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-11-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm-32: Use SMC arch wrappersElliot Berman2-55/+17
Use SMC arch wrappers instead of inline assembly. Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-10-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm-64: Improve SMC convention detectionElliot Berman1-14/+27
Improve the calling convention detection to use __qcom_scm_is_call_available() and not blindly assume 32-bit mode if the checks fails. BUG() if neither 32-bit or 64-bit mode works. Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-9-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smcccElliot Berman1-20/+34
qcom_scm_call_smccc should be responsible for converting qcom_scm_desc into arguments for smc call. Consolidate the dispersed logic to convert qcom_scm_desc into smc arguments inside qcom_scm_call_smccc. Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-8-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm-64: Add SCM results structElliot Berman1-43/+50
Remove knowledge of arm_smccc_res struct from client wrappers so that client wrappers only work QCOM SCM data structures. SCM calls may have up to 3 arguments, so qcom_scm_call_smccc is responsible now for filling those 3 arguments accordingly. This is necessary to support merging legacy and SMC conventions in an upcoming patch. Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-7-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_descElliot Berman1-74/+121
Service, command, and owner IDs are all part of qcom_scm_desc struct and have no special reason to be a function argument (or hard-coded in the case of owner [1]). Moving them to be part of qcom_scm_desc struct improves readability. [1]: Example of SCM function using owner vale other than hard-coded SIP value: https://source.codeaurora.org/quic/la/kernel/msm-4.9/tree/drivers/soc/qcom/smcinvoke.c?h=kernel.lnx.4.9.r28-rel#n35 Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-6-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm-64: Make SMC macros less magicalElliot Berman1-3/+3
Improve understandability of SMC macros by reversing the logic as they are all functions of how many arguments can be shoved in registers and how many SCM arguments are supported. There aren't 4 register arguments because are 7 arguments that go into a buffer - there are up to 7 arguments that are overflowed into a buffer because only 4 registers are allocated for arguments. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-5-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm: Remove unused qcom_scm_get_versionElliot Berman1-36/+0
Remove unused qcom_scm_get_version. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-4-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm: Apply consistent naming scheme to command IDsElliot Berman4-72/+64
Create a consistent naming scheme for command IDs. The scheme is QCOM_SCM_##svc_##cmd. Remove unused macros QCOM_SCM_FLAG_HLOS, QCOM_SCM_FLAG_COLDBOOT_MC, QCOM_SCM_FLAG_WARMBOOT_MC, QCOM_SCM_CMD_CORE_HOTPLUGGED, and QCOM_SCM_BOOT_ADDR_MC. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-3-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07firmware: qcom_scm: Rename macros and structuresElliot Berman2-60/+64
Rename legacy-specific structures and macros with legacy prefix; rename smc-specific structures and macros with smc prefix. This should make it clearer which structures are generic to "SCM" and which are specfically for implementing the convention. Tested-by: Brian Masney <masneyb@onstation.org> # arm32 Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Link: https://lore.kernel.org/r/1578431066-19600-2-git-send-email-eberman@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 08:45:16 +0000