| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The safexcel module loads firmware so add MODULE_FIRMWARE macros to
provide that information via modinfo.
Signed-off-by: Juerg Haefliger <juergh@protonmail.com>
Acked-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
s/procesing/processing/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Antoine Tenart <atenart@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove dev_err() messages after platform_get_irq*() failures.
drivers/crypto/inside-secure/safexcel.c: line 1161 is redundant
because platform_get_irq() already prints an error
Generated by: scripts/coccinelle/api/platform_get_irq.cocci
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The cipher routines in the crypto API are mostly intended for templates
implementing skcipher modes generically in software, and shouldn't be
used outside of the crypto subsystem. So move the prototypes and all
related definitions to a new header file under include/crypto/internal.
Also, let's use the new module namespace feature to move the symbol
exports into a new namespace CRYPTO_INTERNAL.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
An incorrect sizeof() is being used, sizeof(priv->ring[i].rdr_req) is
not correct, it should be sizeof(*priv->ring[i].rdr_req). Note that
since the size of ** is the same size as * this is not causing any
issues.
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Fixes: 9744fec95f06 ("crypto: inside-secure - remove request list to improve performance")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The code in the current implementation of safexcel_hmac_alg_setkey
can be reused by safexcel_cipher. This patch does just that by
renaming the previous safexcel_hmac_setkey to __safexcel_hmac_setkey.
The now-shared safexcel_hmac_alg_setkey becomes safexcel_hmac_setkey
and a new safexcel_hmac_alg_setkey has been added for use by ahash
transforms.
As a result safexcel_aead_setkey's stack frame has been reduced by
about half in size, or about 512 bytes.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As both safexcel_ahash_ctx and safexcel_cipher_ctx contain ipad
and opad buffers this patch moves them into the common struct
safexcel_context. It also adds a union so that they can be accessed
in the appropriate endian without crazy casts.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch moves the priv pointer into struct safexcel_context
because both structs that extend safexcel_context have that pointer
as well.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for EIP197 instances that include the output
classifier (OCE) option, as used by one of our biggest customers.
The OCE normally requires initialization and dedicated firmware, but
for the simple operations supported by this driver, we just bypass it
completely for now (using what is formally a debug feature).
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@rambus.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On systems with coherence issues, packet processed could succeed while
it should have failed, e.g. because of an authentication fail.
This is because the driver would read stale status information that had
all error bits initialised to zero = no error.
Since this is potential a security risk, we want to prevent it from being
a possibility at all. So initialize all error bits to error state, so
that reading stale status information will always result in errors.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@rambus.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use kfree_sensitive() instead of open-coding it.
Signed-off-by: Denis Efremov <efremov@linux.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Balance the irqs of the inside secure driver over all
available cpus.
Currently all interrupts are handled by the first CPU.
From my testing with IPSec AES-GCM 256
on my MCbin with 4 Cores I get a 50% speed increase:
Before the patch: 99.73 Kpps
With the patch: 151.25 Kpps
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Set the flag CRYPTO_ALG_ALLOCATES_MEMORY in the crypto drivers that
allocate memory.
drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c: sun8i_ce_cipher
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c: sun8i_ss_cipher
drivers/crypto/amlogic/amlogic-gxl-core.c: meson_cipher
drivers/crypto/axis/artpec6_crypto.c: artpec6_crypto_common_init
drivers/crypto/bcm/cipher.c: spu_skcipher_rx_sg_create
drivers/crypto/caam/caamalg.c: aead_edesc_alloc
drivers/crypto/caam/caamalg_qi.c: aead_edesc_alloc
drivers/crypto/caam/caamalg_qi2.c: aead_edesc_alloc
drivers/crypto/caam/caamhash.c: hash_digest_key
drivers/crypto/cavium/cpt/cptvf_algs.c: process_request
drivers/crypto/cavium/nitrox/nitrox_aead.c: nitrox_process_se_request
drivers/crypto/cavium/nitrox/nitrox_skcipher.c: nitrox_process_se_request
drivers/crypto/ccp/ccp-crypto-aes-cmac.c: ccp_do_cmac_update
drivers/crypto/ccp/ccp-crypto-aes-galois.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-aes-xts.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-aes.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-des3.c: ccp_crypto_enqueue_request
drivers/crypto/ccp/ccp-crypto-sha.c: ccp_crypto_enqueue_request
drivers/crypto/chelsio/chcr_algo.c: create_cipher_wr
drivers/crypto/hisilicon/sec/sec_algs.c: sec_alloc_and_fill_hw_sgl
drivers/crypto/hisilicon/sec2/sec_crypto.c: sec_alloc_req_id
drivers/crypto/inside-secure/safexcel_cipher.c: safexcel_queue_req
drivers/crypto/inside-secure/safexcel_hash.c: safexcel_ahash_enqueue
drivers/crypto/ixp4xx_crypto.c: ablk_perform
drivers/crypto/marvell/cesa/cipher.c: mv_cesa_skcipher_dma_req_init
drivers/crypto/marvell/cesa/hash.c: mv_cesa_ahash_dma_req_init
drivers/crypto/marvell/octeontx/otx_cptvf_algs.c: create_ctx_hdr
drivers/crypto/n2_core.c: n2_compute_chunks
drivers/crypto/picoxcell_crypto.c: spacc_sg_to_ddt
drivers/crypto/qat/qat_common/qat_algs.c: qat_alg_skcipher_encrypt
drivers/crypto/qce/skcipher.c: qce_skcipher_async_req_handle
drivers/crypto/talitos.c : talitos_edesc_alloc
drivers/crypto/virtio/virtio_crypto_algs.c: __virtio_crypto_skcipher_do_req
drivers/crypto/xilinx/zynqmp-aes-gcm.c: zynqmp_aes_aead_cipher
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[EB: avoid overly-long lines]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CRYPTO_TFM_RES_* flags were apparently meant as a way to make the
->setkey() functions provide more information about errors. But these
flags weren't actually being used or tested, and in many cases they
weren't being set correctly anyway. So they've now been removed.
Also, if someone ever actually needs to start better distinguishing
->setkey() errors (which is somewhat unlikely, as this has been unneeded
for a long time), we'd be much better off just defining different return
values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove CRYPTO_TFM_RES_MASK and all the unneeded logic that
propagates these flags around.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes another hang case on the EIP97 caused by sending
invalidation tokens to the hardware when doing basic (3)DES ECB/CBC
operations. Invalidation tokens are an EIP197 feature and needed nor
supported by the EIP97. So they should not be sent for that device.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@rambus.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The EIP97 hardware cannot handle zero length input data and will (usually)
hang when presented with this anyway. This patch converts any zero length
input to a 1 byte dummy input to prevent this hanging.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@rambus.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Due to the additions of support for modes like AES-CCM and AES-GCM, which
require large command tokens, the size of the descriptor has grown such that
it now does not fit into the descriptor cache of a standard EIP97 anymore.
This means that the driver no longer works on the Marvell Armada 3700LP chip
(as used on e.g. Espressobin) that it has always supported.
Additionally, performance on EIP197's like Marvell A8K may also degrade
due to being able to fit less descriptors in the on-chip cache.
Putting these tokens into the descriptor was really a hack and not how the
design was supposed to be used - resource allocation did not account for it.
So what this patch does, is move the command token out of the descriptor.
To avoid having to allocate buffers on the fly for these command tokens,
they are stuffed in a "shadow ring", which is a circular buffer of fixed
size blocks that runs in lock-step with the descriptor ring. i.e. there is
one token block per descriptor. The descriptor ring itself is then pre-
populated with the pointers to these token blocks so these do not need to
be filled in when building the descriptors later.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@rambus.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fixes coccicheck warning:
drivers/crypto/inside-secure/safexcel_cipher.c:2534:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fixed 2 copy-paste mistakes in the commit mentioned below that caused
authenc w/ (3)DES to consistently fail on Macchiatobin (but strangely
work fine on x86+FPGA??).
Now fully tested on both platforms.
Fixes: 13a1bb93f7b1c9 ("crypto: inside-secure - Fixed warnings...")
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fixed mask used for CFSIZE and RFSIZE fields of HIA_OPTIONS register,
these were all 1 bit too wide. Which caused the probing of a standard
EIP97 to actually hang due to assume way too large descriptor FIFO's.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
safexcel_remove misses disabling priv->reg_clk like what is done when
probe fails.
Add the missed call to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This fixes a bunch of endianness related sparse warnings reported by the
kbuild test robot as well as Ben Dooks.
Credits for the fix to safexcel.c go to Ben Dooks.
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
safexcel_pci_remove() is only used locally in the module and not exported,
so added a static function specifier.
This fixes a sparse issue reported by Ben Dooks.
Fixes: 625f269a5a7a ("crypto: inside-secure - add support for...")
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Always take the zero length hash value for SM3 from the local constant
to avoid a reported build error when SM3 is configured to be a module.
Fixes: 0f2bc13181ce ("crypto: inside-secure - Added support for...")
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Antoine Tenart <antoine.tenart@ack.tf>
Acked-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is a spelling mistake in a dev_err message. Fix it. Add in missing
newline.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When both PCI and OF are disabled, no drivers are registered, and
we get some unused-function warnings:
drivers/crypto/inside-secure/safexcel.c:1221:13: error: unused function 'safexcel_unregister_algorithms' [-Werror,-Wunused-function]
static void safexcel_unregister_algorithms(struct safexcel_crypto_priv *priv)
drivers/crypto/inside-secure/safexcel.c:1307:12: error: unused function 'safexcel_probe_generic' [-Werror,-Wunused-function]
static int safexcel_probe_generic(void *pdev,
drivers/crypto/inside-secure/safexcel.c:1531:13: error: unused function 'safexcel_hw_reset_rings' [-Werror,-Wunused-function]
static void safexcel_hw_reset_rings(struct safexcel_crypto_priv *priv)
It's better to make the compiler see what is going on and remove
such ifdef checks completely. In case of PCI, this is trivial since
pci_register_driver() is defined to an empty function that makes the
compiler subsequently drop all unused code silently.
The global pcireg_rc/ofreg_rc variables are not actually needed here
since the driver registration does not fail in ways that would make
it helpful.
For CONFIG_OF, an IS_ENABLED() check is still required, since platform
drivers can exist both with and without it.
A little change to linux/pci.h is needed to ensure that
pcim_enable_device() is visible to the driver. Moving the declaration
outside of ifdef would be sufficient here, but for consistency with the
rest of the file, adding an inline helper is probably best.
Fixes: 212ef6f29e5b ("crypto: inside-secure - Fix unused variable warning when CONFIG_PCI=n")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci.h
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A previous fixup avoided an unused variable warning but replaced
it with a slightly scarier warning:
drivers/crypto/inside-secure/safexcel.c:1100:6: error: variable 'irq' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
This is harmless as it is impossible to get into this case, but
the compiler has no way of knowing that. Add an explicit error
handling case to make it obvious to both compilers and humans
reading the source.
Fixes: 212ef6f29e5b ("crypto: inside-secure - Fix unused variable warning when CONFIG_PCI=n")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for the EIP196, which is an EIP197 derivative
that has no classification hardware and a simplified record cache.
The patch has been tested with the eip196b-ie and eip197c-iewxkbc
configurations on the Xilinx VCU118 development board as well as on the
Macchiatobin board (Marvell A8K - EIP197b-ieswx), including the crypto
extra tests.
Note that this patchset applies on top of the earlier submitted
"Add support for eip197f_iewc" series.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The current driver assumes one dedicated ring interrupt controller per
ring. However, some existing EIP(1)97 HW has less ring AIC's than rings.
This patch allows the driver to work with such HW by detecting how many
ring AIC's are present and restricting the number of rings it *uses* by
the number of ring AIC's present. This allows it to at least function.
(optimization for the future: add ring dispatch functionality in the
interrupt service routine such that multiple rings can be supported from
one ring AIC, allowing all rings to be used)
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for large EIP197's with a 256 bit wide internal
bus, which affects the format of the result descriptor due to internal
alignment requirements.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for rfc4309(ccm(aes)) for use with IPsec ESP
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for rfc4543(gcm(aes)) - i.e. AES-GMAC - for use
with IPsec ESP
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for rfc4106(gcm(aes)) for use with IPsec ESP
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixed a corner case admin RAM probing issue witnessed on the
Xilinx VCU118 FPGA development board with an EIP197 configuration with
4096 words of admin RAM, of which only 2050 were recognised.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch corrects an error in the Transform Record Cache initialization
code that was causing intermittent stability problems on the Macchiatobin
board.
Unfortunately, due to HW platform specifics, the problem could not happen
on the main development platform, being the VCU118 Xilinx development
board. And since it was a problem with hash table access, it was very
dependent on the actual physical context record DMA buffers being used,
i.e. with some (bad) luck it could seemingly work quit stable for a while.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for the authenc(hmac(sha224),cbc(des)),
authenc(hmac(sha256),cbc(des)), authenc(hmac(sha384),cbc(des))
and authenc(hmac(sha512),cbc(des)) aead's
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for the authenc(hmac(sha224),cbc(des3_ede)),
authenc(hmac(sha256),cbc(des3_ede)), authenc(hmac(sha384),cbc(des3_ede))
and authenc(hmac(sha512),cbc(des3_ede)) aead's
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for the authenc(hmac(sha1),cbc(des)) aead
changes since v1:
- rebased on top of DES changes made to cryptodev/master
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for hmac(sha3-224), hmac(sha3-256), hmac(sha3-384)
and hmac(sha3-512) authentication algorithms.
The patch has been tested with the eip197c_iewxkbc configuration on the
Xilinx VCU118 development board, including the testmgr extra tests.
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for sha3-224, sha3-256, sha3-384 and sha3-512
basic hashes.
The patch has been tested with the eip197c_iewxkbc configuration on the
Xilinx VCU118 development board, including the testmgr extra tests.
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for the authenc(hmac(sha1),cbc(sm4)),
authenc(hmac(sm3),cbc(sm4)), authenc(hmac(sha1),rfc3686(ctr(sm4))),
and authenc(hmac(sm3),rfc3686(ctr(sm4))) aead ciphersuites.
These are necessary to support IPsec according to the Chinese standard
GM/T 022-1014 - IPsec VPN specification.
Note that there are no testvectors present in testmgr for these
ciphersuites. However, considering all building blocks have already been
verified elsewhere, it is fair to assume the generic implementation to be
correct-by-construction.
The hardware implementation has been fuzzed against this generic
implementation by means of a locally modified testmgr. The intention is
to upstream these testmgr changes but this is pending other testmgr changes
being made by Eric Biggers.
The patch has been tested with the eip197c_iewxkbc configuration on the
Xilinx VCU118 development board, using the abovementioned modified testmgr
This patch applies on top of "Add support for SM4 ciphers" and needs to
be applied before "Add (HMAC) SHA3 support".
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for SM4 in (32 bit) CTR mode, i.e. skcipher
rfc3686(ctr(sm4)).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for SM4 in CFB mode, i.e. skcipher cfb(sm4).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for SM4 in OFB mode, i.e. skcipher ofb(sm4).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for SM4 in CBC mode, i.e. skcipher cbc(sm4).
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for SM4 in ECB mode, i.e. skcipher ecb(sm4).
changes since v1:
- make SAFEXCEL_SM4 case entry explit, using the proper SM4_BLOCK_SIZE
instead of "borrowing" the AES code which "coincidentally" works
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Added support for the hmac(sm3) ahash authentication algorithm
changes since v1:
- added Acked-by tag below, no changes to the source
changes since v2:
- nothing
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
