summaryrefslogtreecommitdiff
path: root/drivers/clk/hisilicon
AgeCommit message (Collapse)AuthorFilesLines
2019-11-27Merge branches 'clk-hisi', 'clk-amlogic', 'clk-samsung', 'clk-renesas' and ↵Stephen Boyd1-1/+2
'clk-imx' into clk-next * clk-hisi: clk: hi6220: use CLK_OF_DECLARE_DRIVER * clk-amlogic: clk: meson: axg-audio: use devm_platform_ioremap_resource() to simplify code clk: meson: axg_audio: add sm1 support clk: meson: axg-audio: provide clk top signal name clk: meson: axg-audio: prepare sm1 addition clk: meson: axg-audio: fix regmap last register clk: meson: axg-audio: remove useless defines dt-bindings: clock: meson: add sm1 resets to the axg-audio controller dt-bindings: clk: axg-audio: add sm1 bindings clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes clk: meson: g12a: fix cpu clock rate setting clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate * clk-samsung: clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume clk: samsung: exynos5420: Add VPLL rate table clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU clk: samsung: exynos5433: Fix error paths * clk-renesas: (23 commits) clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960 dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support clk: renesas: r8a77965: Remove superfluous semicolon dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example dt-bindings: clock: renesas: Remove R-Car Gen2 legacy DT bindings dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions dt-bindings: power: Add r8a77961 SYSC power domain definitions clk: renesas: rcar-gen3: Switch SD clocks to .determine_rate() clk: renesas: rcar-gen3: Switch Z clocks to .determine_rate() clk: renesas: rcar-gen2: Switch Z clock to .determine_rate() clk: renesas: r8a774b1: Add TMU clock clk: renesas: cpg-mssr: Add r8a774b1 support dt-bindings: clock: renesas: cpg-mssr: Document r8a774b1 binding clk: renesas: rcar-gen3: Loop to find best rate in cpg_sd_clock_round_rate() clk: renesas: rcar-gen3: Absorb cpg_sd_clock_calc_div() clk: renesas: rcar-gen3: Avoid double table iteration in SD .set_rate() clk: renesas: rcar-gen3: Improve arithmetic divisions clk: renesas: rcar-gen2: Improve arithmetic divisions clk: renesas: Remove R-Car Gen2 legacy DT clock support ... * clk-imx: clk: imx: imx8mq: fix sys3_pll_out_sels clk: imx7ulp: do not export out IMX7ULP_CLK_MIPI_PLL clock clk: imx: imx6ul: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sx: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sll: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx7d: use imx_obtain_fixed_clk_hw to simplify code clk: imx7ulp: Correct DDR clock mux options clk: imx7ulp: Correct system clock source option #7 clk: imx: imx8mq: mark sys1/2_pll as fixed clock clk: imx: imx8mn: mark sys_pll1/2 as fixed clock clk: imx: imx8mm: mark sys_pll1/2 as fixed clock clk: imx8mn: Define gates for pll1/2 fixed dividers clk: imx8mm: Define gates for pll1/2 fixed dividers clk: imx8mq: Define gates for pll1/2 fixed dividers clk: imx: clk-pll14xx: Make two variables static clk: imx8mq: Add VIDEO2_PLL clock clk: imx8mn: Use common 1443X/1416X PLL clock structure clk: imx8mm: Move 1443X/1416X PLL clock structure to common place clk: imx: pll14xx: Fix quick switch of S/K parameter
2019-11-27Merge branches 'clk-rohm', 'clk-hisilicon', 'clk-marvell', 'clk-unused' and ↵Stephen Boyd3-109/+107
'clk-devm-ioremap-resource' into clk-next - Prepare Armada 3700 for suspend to RAM by moving suspend/resume priority for PCIe - Drop unused variables, enums, etc. in various clk drivers - Convert various drivers to use devm_platform_ioremap_resource() * clk-rohm: clk: bd718x7: Add MODULE_ALIAS() * clk-hisilicon: clk: hisilicon: fix sparse warnings in clk-hi3660.c clk: hisilicon: fix sparse warnings in clk-hi3670.c * clk-marvell: dt-bindings: clk: armada3700: document the PCIe clock dt-bindings: clk: armada3700: fix typo in SoC name clk: mvebu: armada-37xx-periph: change suspend/resume time clk: mvebu: armada-37xx-periph: add PCIe gated clock * clk-unused: clk: armada-xp: remove unused code clk: imx: imx8mn: drop unused pll enum clk: ast2600: remove unused variable 'eclk_parent_names' * clk-devm-ioremap-resource: clk: sprd: Change to use devm_platform_ioremap_resource() clk: s3c2410: use devm_platform_ioremap_resource() to simplify code clk: axs10x: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt6797: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt7629: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt7622: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt8183: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt6779: use devm_platform_ioremap_resource() to simplify code clk: mediatek: mt2712: use devm_platform_ioremap_resource() to simplify code clk: davinci: use devm_platform_ioremap_resource() to simplify code clk: hisilicon: use devm_platform_ioremap_resource() to simplify code clk: bcm2835: use devm_platform_ioremap_resource() to simplify code
2019-10-28clk: hi6220: use CLK_OF_DECLARE_DRIVERPeter Griffin1-1/+2
As now we also need to probe in the reset driver as well. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Allison Randal <allison@lohutok.net> Cc: Peter Griffin <peter.griffin@linaro.org> Cc: linux-clk@vger.kernel.org Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Link: https://lkml.kernel.org/r/20191001182546.70090-1-john.stultz@linaro.org [sboyd@kernel.org: Add comment about reset driver] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-16clk: hisilicon: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.kernel.org/r/20191014144014.20644-1-yuehaibing@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-03clk: hisilicon: fix sparse warnings in clk-hi3660.cBen Dooks1-30/+30
Fix sparse warnings of a 0 being used for a pointer by removing it from the initialiser. drivers/clk/hisilicon/clk-hi3660.c:336:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:338:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:340:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:342:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:344:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:346:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:348:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:350:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:352:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:354:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:356:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:358:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:360:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:362:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:364:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:366:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:368:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:370:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:372:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:374:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:376:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:378:71: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:423:68: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:425:68: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:427:68: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:429:68: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:449:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:451:71: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:453:71: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3660.c:455:71: warning: Using plain integer as NULL pointer Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Link: https://lkml.kernel.org/r/20190925112347.14141-2-ben.dooks@codethink.co.uk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-03clk: hisilicon: fix sparse warnings in clk-hi3670.cBen Dooks1-76/+76
Fix the following warnings from sparse by removing the 0 initialiser that is actually a pointer. drivers/clk/hisilicon/clk-hi3670.c:298:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:300:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:302:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:304:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:306:63: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:308:63: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:310:63: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:312:63: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:314:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:316:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:318:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:320:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:322:63: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:324:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:326:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:328:63: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:330:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:332:63: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:334:63: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:336:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:338:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:340:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:342:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:344:63: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:346:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:348:65: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:350:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:352:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:488:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:490:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:492:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:494:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:496:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:498:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:500:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:502:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:504:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:506:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:508:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:510:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:512:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:514:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:516:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:518:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:520:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:522:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:524:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:526:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:528:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:530:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:532:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:534:71: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:536:71: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:538:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:611:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:614:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:616:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:653:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:655:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:657:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:659:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:661:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:663:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:665:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:735:63: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:737:63: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:739:63: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:741:63: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:743:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:745:64: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:802:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:804:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:806:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:808:69: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:810:70: warning: Using plain integer as NULL pointer drivers/clk/hisilicon/clk-hi3670.c:812:69: warning: Using plain integer as NULL pointer Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Link: https://lkml.kernel.org/r/20190925112347.14141-1-ben.dooks@codethink.co.uk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner3-14/+3
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 101 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner2-21/+2
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner5-65/+5
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1Thomas Gleixner5-75/+5
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option [no]_[pad]_[ctrl] any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 176 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd1-0/+1
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-07Merge branches 'clk-hisi', 'clk-lochnagar', 'clk-allwinner', 'clk-rockchip' ↵Stephen Boyd1-1/+5
and 'clk-qoriq' into clk-next - Mark UFS clk as critical on Hi-Silicon hi3660 SoCs - Support for Cirrus Logic Lochnagar clks * clk-hisi: clk: hi3660: Mark clk_gate_ufs_subsys as critical * clk-lochnagar: clk: lochnagar: Add support for the Cirrus Logic Lochnagar clk: lochnagar: Add initial binding documentation * clk-allwinner: clk: sunxi-ng: sun5i: Export the MBUS clock clk: sunxi-ng: a83t: Add pll-video0 as parent of csi-mclk clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate clk: sunxi-ng: h6: Preset hdmi-cec clock parent clk: sunxi: Add Kconfig options clk: sunxi-ng: f1c100s: fix USB PHY gate bit offset clk: sunxi-ng: Allow DE clock to set parent rate * clk-rockchip: clk: rockchip: undo several noc and special clocks as critical on rk3288 clk: rockchip: add a COMPOSITE_DIV_OFFSET clock-type clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288 clk: rockchip: Limit use of USB PHY clock to USB on rk3288 clk: rockchip: Fix video codec clocks on rk3288 clk: rockchip: Make rkpwm a critical clock on rk3288 clk: rockchip: fix wrong clock definitions for rk3328 * clk-qoriq: clk: qoriq: increase array size of cmux_to_group dt-bindings: qoriq-clock: Add ls1028a chip compatible string clk: qoriq: Add ls1028a clock configuration clk: qoriq: add more PLL divider clocks support dt-bindings: qoriq-clock: add more PLL divider clocks support
2019-04-23clk: core: replace clk_{readl,writel} with {readl,writel}Jonas Gorski1-2/+2
Now that clk_{readl,writel} is just an alias for {readl,writel}, we can switch all users of clk_* to use the accessors directly and remove the helpers. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> [sboyd@kernel.org: Also convert renesas file so that this can be compile independently] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-19clk: hi3660: Mark clk_gate_ufs_subsys as criticalLeo Yan1-1/+5
clk_gate_ufs_subsys is a system bus clock, turning off it will introduce lockup issue during system suspend flow. Let's mark clk_gate_ufs_subsys as critical clock, thus keeps it on during system suspend and resume. Fixes: d374e6fd5088 ("clk: hisilicon: Add clock driver for hi3660 SoC") Cc: stable@vger.kernel.org Cc: Zhong Kaihua <zhongkaihua@huawei.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Suggested-by: Dong Zhang <zhangdong46@hisilicon.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: hisilicon: Remove usage of CLK_IS_BASICStephen Boyd4-4/+4
This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit. Cc: Jiancheng Xue <xuejiancheng@hisilicon.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-18Merge branches 'clk-samsung', 'clk-hisi3670' and 'clk-at91-div-0' into clk-nextStephen Boyd3-0/+1024
- Hisilicon 3670 SoC support * clk-samsung: dt-bindings: clock: samsung: Add SPDX license identifiers clk: samsung: Use clk_hw API for calling clk framework from clk notifiers clk: samsung: exynos5420: Enable PERIS clocks for suspend clk: samsung: exynos5420: Define CLK_SECKEY gate clock only or Exynos5420 clk: samsung: exynos5433: Keep sclk_uart clocks enabled in suspend clk: samsung: Remove obsolete code for Exynos4412 ISP clocks clk: samsung: exynos5433: Add suspend state for TOP, CPIF & PERIC CMUs clk: samsung: Use NOIRQ stage for Exynos5433 clocks suspend/resume clk: samsung: exynos5420: Use generic helper for handling suspend/resume clk: samsung: exynos4: Use generic helper for handling suspend/resume clk: samsung: Add support for setting registers state before suspend clk: samsung: exynos5250: Use generic helper for handling suspend/resume clk: samsung: s5pv210: Use generic helper for handling suspend/resume clk: samsung: s3c64xx: Use generic helper for handling suspend/resume clk: samsung: s3c2443: Use generic helper for handling suspend/resume clk: samsung: s3c2412: Use generic helper for handling suspend/resume clk: samsung: s3c2410: Use generic helper for handling suspend/resume clk: samsung: Remove excessive include * clk-hisi3670: clk: hisilicon: Add clock driver for Hi3670 SoC dt-bindings: clk: hisilicon: Add bindings for Hi3670 clk * clk-at91-div-0: clk: at91: Fix division by zero in PLL recalc_rate()
2018-10-16clk: hisilicon: Add clock driver for Hi3670 SoCManivannan Sadhasivam3-0/+1024
Add clock driver for HiSilicon Hi3670 SoC utilizing HiSilicon's common clk code. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-31reset: hisilicon: fix potential NULL pointer dereferenceGustavo A. R. Silva1-3/+2
There is a potential execution path in which function platform_get_resource() returns NULL. If this happens, we will end up having a NULL pointer dereference. Fix this by replacing devm_ioremap with devm_ioremap_resource, which has the NULL check and the memory region request. This code was detected with the help of Coccinelle. Cc: stable@vger.kernel.org Fixes: 97b7129cd2af ("reset: hisilicon: change the definition of hisi_reset_init") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-04Merge branches 'clk-imx7d', 'clk-hisi-stub', 'clk-mvebu', 'clk-imx6-epit' ↵Stephen Boyd1-5/+8
and 'clk-debugfs-simple' into clk-next * clk-imx7d: clk: imx7d: reset parent for mipi csi root clk: imx7d: fix mipi dphy div parent * clk-hisi-stub: clk/driver/hisi: Consolidate the Kconfig for the CLOCK_STUB * clk-mvebu: clk: mvebu: use correct bit for 98DX3236 NAND * clk-imx6-epit: clk: imx6: add EPIT clock support * clk-debugfs-simple: clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions
2018-06-01clk/driver/hisi: Consolidate the Kconfig for the CLOCK_STUBDaniel Lezcano1-5/+8
The current defconfig is inconsistent as it selects the mailbox and the clock for the hi6220 and the hi3660 without having their Kconfigs making sure the dependencies are correct. It ends up when selecting different versions for the kernel (for example when git bisecting) those options disappear and they don't get back, leading to unexpected behaviors. In our case, the cpufreq driver does no longer work because the clock fails to initialize due to the clock stub and the mailbox missing. In order to have the dependencies correctly set when defaulting, let's do the same as commit 3a49afb84ca074e ("clk: enable hi655x common clk automatically") where we select automatically the driver when the parent driver is selected. With sensible defaults in place, we can leave other choices for EXPERT. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-15clk: hisilicon: add missing usb3 clocks for Hi3798CV200 SoCJianguo Sun1-0/+17
There are two USB3 host controllers on Hi3798CV200 SoC. This commit adds missing clocks for them. Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-13Merge tag 'clk-for-linus' of ↵Linus Torvalds6-38/+232
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The large diff this time around is from the addition of a new clk driver for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits) clk: davinci: add a reset lookup table for psc0 clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux clk: cs2000: set pm_ops in hibernate-compatible way clk: bcm2835: De-assert/assert PLL reset signal when appropriate clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 clk: ti: fix flag space conflict with clkctrl clocks clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: Add driver for the si544 clock generator chip clk: davinci: Remove redundant dev_err calls clk: uniphier: add ethernet clock control support for PXs3 ...
2018-03-20clk: hisilicon: fix potential NULL dereference in hisi_clk_alloc()Wei Yongjun1-0/+2
platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Fixes: 322269163a36 ("clk: hisilicon: add hisi_clk_alloc function.") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-16clk: hisilicon: mark wdt_mux_p[] as constArnd Bergmann1-1/+1
The symbol is in the __initconst section but not marked init, which caused a warning when building with LTO. This makes it 'const' as was obviously intended. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: c80dfd9bf54e ("clk: hisilicon: add CRG driver for Hi3516CV300 SoC") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-14clk: hisilicon: Mark phase_ops staticStephen Boyd1-1/+1
Sparse rightfully complains: drivers/clk/hisilicon/clk-hisi-phase.c:88:22: warning: symbol 'clk_phase_ops' was not declared. Should it be static? drivers/clk/hisilicon/clk-hisi-phase.c:88:22: warning: symbol 'clk_phase_ops' was not declared. Should it be static? Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-12clk: hisilicon: hi3660：Fix potential NULL dereference in ↵Wei Yongjun1-0/+2
hi3660_stub_clk_probe() platform_get_resource() may return NULL, add proper check to avoid potential NULL dereferencing. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Fixes: 4f16f7ff3bc0 ("clk: hisilicon: Add support for Hi3660 stub clocks") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-12clk: hi3798cv200: add emmc sample and drive clocktianshuliang1-0/+20
It adds eMMC sample clock HISTB_MMC_SAMPLE_CLK and drive clock HISTB_MMC_DRV_CLK support for Hi3798cv200 SoC. Signed-off-by: tianshuliang <tianshuliang@hisilicon.com> Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-03-12clk: hisilicon: add hisi phase clock supporttianshuliang4-1/+165
Add a phase clock type for HiSilicon SoCs,which supports clk_set_phase operation. Signed-off-by: tianshuliang <tianshuliang@hisilicon.com> Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-02-27clk: hi3798cv200: add COMBPHY0 clock supportJianguo Sun1-4/+11
The clock COMBPHY1 has already been supported by hi3798cv200 driver, but COMBPHY0 is missing. It adds COMBPHY0 clock support. Since the mux table is being shared by COMBPHY0 and COMBPHY1, it renames comphy1_mux_p and comphy1_mux_table a bit to drop instance number '1' from there. Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-02-27clk: hi3798cv200: fix define indentationShawn Guo1-24/+24
It's a coding-style fix, which corrects the indentation for all those clock definitions, so that the code looks nicer and new definitions can be added with a recommended indentation. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-02-27clk: hi3798cv200: add support for HISTB_USB2_OTG_UTMI_CLKShawn Guo1-0/+2
The clock HISTB_USB2_OTG_UTMI_CLK is defined by device tree bindings in include/dt-bindings/clock/histb-clock.h, but hasn't been supported by hi3798cv200 clock driver. Let's add the support for it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-02-27clk: hi3798cv200: correct IR clock parentYounian Wang1-1/+1
The IR clock is sourced from '24m' rather than '100m'. Correct it. Signed-off-by: Younian Wang <wangyounian@hisilicon.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-02-27clk: hi3798cv200: fix unregister call sequence in error pathShawn Guo1-7/+6
The unregister call sequence in error path of function hi3798cv200_clk_register() should be opposite to the order of register calls. Let's reverse the call sequence to fix the problem. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-01-26Merge branch 'clk-divider-container' into clk-nextStephen Boyd1-1/+1
* clk-divider-container: clk: divider: fix incorrect usage of container_of Plus fixup sprd/div.c to pass the width too.
2017-12-28clk: divider: fix incorrect usage of container_ofJerome Brunet1-1/+1
divider_recalc_rate() is an helper function used by clock divider of different types, so the structure containing the 'hw' pointer is not always a 'struct clk_divider' At the following line: > div = _get_div(table, val, flags, divider->width); in several cases, the value of 'divider->width' is garbage as the actual structure behind this memory is not a 'struct clk_divider' Fortunately, this width value is used by _get_val() only when CLK_DIVIDER_MAX_AT_ZERO flag is set. This has never been the case so far when the structure is not a 'struct clk_divider'. This is probably why we did not notice this bug before Fixes: afe76c8fd030 ("clk: allow a clk divider with max divisor when zero") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-06clk: hisilicon: Add support for Hi3660 stub clocksKaihua Zhong3-0/+192
Hi3660 has four stub clocks, which are big and LITTLE cluster clocks, GPU clock and DDR clock. These clocks ask MCU for frequency scaling by sending message through mailbox. This commit adds support for stub clocks, it requests the dedicated mailbox channel at initialization; then later uses this channel to send message to MCU to execute frequency scaling. The four stub clocks share the same mailbox channel, but every stub clock has its own command id so MCU can distinguish the requirement coming for which clock. A shared memory is used to present effective frequency value, so the clock driver uses I/O mapping for the memory and reads back rate value. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Kai Zhao <zhaokai1@hisilicon.com> Signed-off-by: Tao Wang <kevin.wangtao@hisilicon.com> Signed-off-by: Ruyi Wang <wangruyi@huawei.com> Signed-off-by: Kaihua Zhong <zhongkaihua@huawei.com> [sboyd: Fix possible out of bounds access in hi3660_stub_clk_hw_get(), use devm_of_clk_add_hw_provider(), devm_ioremap() returns NULL not error pointers] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-17Merge tag 'clk-for-linus' of ↵Linus Torvalds6-10/+18
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have two changes to the core framework this time around. The first being a large change that introduces runtime PM support to the clk framework. Now we properly call runtime PM operations on the device providing a clk when the clk is in use. This helps on SoCs where the clks provided by a device need something to be powered on before using the clks, like power domains or regulators. It also helps power those things down when clks aren't in use. The other core change is a devm API addition for clk providers so we can get rid of a bunch of clk driver remove functions that are just doing of_clk_del_provider(). Outside of the core, we have the usual addition of clk drivers and smattering of non-critical fixes to existing drivers. The biggest diff is support for Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch of data. By the way, we're trying something new here where we build the tree up with topic branches. We plan to work this into our workflow so that we don't step on each other's toes, and so the fixes branch can be merged on an as-needed basis. Summary: Core: - runtime PM support for clk providers - devm API for of_clk_add_hw_provider() New Drivers: - Mediatek MT2712 and MT7622 - Renesas R-Car V3M SoC Updates: - runtime PM support for Samsung exynos5433/exynos4412 providers - removal of clkdev aliases on Samsung SoCs - convert clk-gpio to use gpio descriptors - various driver cleanups to match kernel coding style - Amlogic Video Processing Unit VPU and VAPB clks - sigma-delta modulation for Allwinner audio PLLs - Allwinner A83t Display clks - support for the second display unit clock on Renesas RZ/G1E - suspend/resume support for Renesas R-Car Gen3 CPG/MSSR - new clock ids for Rockchip rk3188 and rk3368 SoCs - various 'const' markings on clk_ops structures - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: stm32h7: fix test of clock config clk: pxa: fix building on older compilers clk: sunxi-ng: a83t: Fix i2c buses bits clk: ti: dra7-atl-clock: fix child-node lookups clk: qcom: common: fix legacy board-clock registration clk: uniphier: fix DAPLL2 clock rate of Pro5 clk: uniphier: fix parent of miodmac clock data clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu' clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep() clk: hi3660: fix incorrect uart3 clock freqency clk: kona-setup: Delete error messages for failed memory allocations ARC: clk: fix spelling mistake: "configurarion" -> "configuration" clk: cdce925: remove redundant check for non-null parent_name clk: versatile: Improve sizeof() usage clk: versatile: Delete error messages for failed memory allocations clk: ux500: Improve sizeof() usage clk: ux500: Delete error messages for failed memory allocations clk: spear: Delete error messages for failed memory allocations clk: ti: Delete error messages for failed memory allocations clk: mmp: Adjust checks for NULL pointers ...
2017-11-14Merge branch 'clk-const' into clk-nextStephen Boyd3-4/+4
* clk-const: clk: make clk_init_data const clk: imx: make clk_ops const clk: mmp: make clk_ops const clk: hisilicon: make clk_ops const clk: mxs: make clk_ops const clk: sirf: make clk_ops const clk: spear: make clk_ops const CLK: SPEAr: make aux_clk_masks structures const CLK: SPEAr: make structure field and function argument as const
2017-11-14clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu'Shawn Guo1-1/+11
Other than 'mmc_mux', 'clk_sdio0_ciu' uses a different parent mux clock. Let's add this mux clock as 'sdio0_mux', and correct the parent of 'clk_sdio0_ciu' to be it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-14clk: hisilicon: Delete an error message for a failed memory allocation in ↵Markus Elfring1-3/+1
hisi_register_clkgate_sep() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-14clk: hi3660: fix incorrect uart3 clock freqencyZhong Kaihua1-1/+1
UART3 clock rate is doubled in previous commit. This error is not detected until recently a mezzanine board which makes real use of uart3 port (through LS connector of 96boards) was setup and tested on hi3660-hikey960 board. This patch changes clock source rate of clk_factor_uart3 to 100000000. Signed-off-by: Zhong Kaihua <zhongkaihua@huawei.com> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01clk: hisilicon: make clk_ops constBhumika Goyal3-4/+4
Make these const as they are only stored in the const field of a clk_init_data structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-01clk: hi6220: mark clock cs_atb_syspll as criticalLeo Yan1-1/+1
Clock cs_atb_syspll is pll used for coresight trace bus; when clock cs_atb_syspll is disabled and operates its child clock node cs_atb results in system hang. So mark clock cs_atb_syspll as critical to keep it enabled. Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1504226835-2115-2-git-send-email-leo.yan@linaro.org
2017-08-31clk: hi6220: change watchdog clock sourceLeo Yan1-3/+3
The old code uses tcxo (19.2MHz) as watchdog clock but actually the watchdog uses 32K clock, as result the watchdog timeout cannot be set correctly and delay long time to reset SoC. So this patch is to use 'ref32k' as clock source for watchdog. Fixes: 72ea48610d43 ("clk: hi6220: Clock driver support for Hisilicon hi6220 SoC") Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-21clk: hisilicon: add usb2 clocks for hi3798cv200 SoCJiancheng Xue1-0/+21
Add usb2 clocks for hi3798cv200 SoC. Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19clk: hi6220: add acpu clockZhangfei Gao1-0/+22
Add acpu clock, including sft clock controlling hi6220 coresight module Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Li Pengcheng <lipengcheng8@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 03:46:25 +0000