| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
tg_update_disptime() only need to adjust postion for 'tg' in
'parent_sq', there is no need to call throtl_enqueue/dequeue_tg(),
since they will set/clear flag THROTL_TG_PENDING and increase/decrease
nr_pending, which is useless. By the way, clear the flag/decrease
nr_pending while there are still throttled bios is not good for debugging.
There are no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220827101637.1775111-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's a little weird to call throtl_dequeue_tg() unconditionally in
throtl_select_dispatch(), since it will be called in tg_update_disptime()
again if some bio is still throttled. Thus call it later if there are no
throttled bio. There are no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220827101637.1775111-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make the code easier to read, like everywhere else.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220827101637.1775111-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If new configuration is submitted while a bio is throttled, then new
waiting time is recalculated regardless that the bio might already wait
for some time:
tg_conf_updated
throtl_start_new_slice
tg_update_disptime
throtl_schedule_next_dispatch
Then io hung can be triggered by always submmiting new configuration
before the throttled bio is dispatched.
Fix the problem by respecting the time that throttled bio already waited.
In order to do that, add new fields to record how many bytes/io are
waited, and use it to calculate wait time for throttled bio under new
configuration.
Some simple test:
1)
cd /sys/fs/cgroup/blkio/
echo $$ > cgroup.procs
echo "8:0 2048" > blkio.throttle.write_bps_device
{
sleep 2
echo "8:0 1024" > blkio.throttle.write_bps_device
} &
dd if=/dev/zero of=/dev/sda bs=8k count=1 oflag=direct
2)
cd /sys/fs/cgroup/blkio/
echo $$ > cgroup.procs
echo "8:0 1024" > blkio.throttle.write_bps_device
{
sleep 4
echo "8:0 2048" > blkio.throttle.write_bps_device
} &
dd if=/dev/zero of=/dev/sda bs=8k count=1 oflag=direct
test results: io finish time
before this patch with this patch
1) 10s 6s
2) 8s 6s
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220829022240.3348319-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No functional changes, new apis will be used in later patches to
calculate wait time for throttled bios when new configuration is
submitted.
Noted this patch also rename tg_with_in_iops/bps_limit() to
tg_within_iops/bps_limit().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220829022240.3348319-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is a problem found by code review in tg_with_in_bps_limit() that
'bps_limit * jiffy_elapsed_rnd' might overflow. Fix the problem by
calling mul_u64_u64_div_u64() instead.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220829022240.3348319-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Test scripts:
cd /sys/fs/cgroup/blkio/
echo "8:0 1024" > blkio.throttle.write_bps_device
echo $$ > cgroup.procs
dd if=/dev/zero of=/dev/sda bs=10k count=1 oflag=direct &
dd if=/dev/zero of=/dev/sda bs=10k count=1 oflag=direct &
Test result:
10240 bytes (10 kB, 10 KiB) copied, 10.0134 s, 1.0 kB/s
10240 bytes (10 kB, 10 KiB) copied, 10.0135 s, 1.0 kB/s
The problem is that the second bio is finished after 10s instead of 20s.
Root cause:
1) second bio will be flagged:
__blk_throtl_bio
while (true) {
...
if (sq->nr_queued[rw]) -> some bio is throttled already
break
};
bio_set_flag(bio, BIO_THROTTLED); -> flag the bio
2) flagged bio will be dispatched without waiting:
throtl_dispatch_tg
tg_may_dispatch
tg_with_in_bps_limit
if (bps_limit == U64_MAX || bio_flagged(bio, BIO_THROTTLED))
*wait = 0; -> wait time is zero
return true;
commit 9f5ede3c01f9 ("block: throttle split bio in case of iops limit")
support to count split bios for iops limit, thus it adds flagged bio
checking in tg_with_in_bps_limit() so that split bios will only count
once for bps limit, however, it introduce a new problem that io throttle
won't work if multiple bios are throttled.
In order to fix the problem, handle iops/bps limit in different ways:
1) for iops limit, there is no flag to record if the bio is throttled,
and iops is always applied.
2) for bps limit, original bio will be flagged with BIO_BPS_THROTTLED,
and io throttle will ignore bio with the flag.
Noted this patch also remove the code to set flag in __bio_clone(), it's
introduced in commit 111be8839817 ("block-throttle: avoid double
charge"), and author thinks split bio can be resubmited and throttled
again, which is wrong because split bio will continue to dispatch from
caller.
Fixes: 9f5ede3c01f9 ("block: throttle split bio in case of iops limit")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220829022240.3348319-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Batched completions can clear multiple bits, but we're only decrementing
the wait_cnt by one each time. This can cause waiters to never be woken,
stalling IO. Use the batched count instead.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215679
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220909184022.1709476-1-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_check_ro() always return false now. Remove this unneeded return value
and cleanup the sole caller. No functional change intended.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20220905102754.1942-1-linmiaohe@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If code reaches here, needs_restart must be true. Remove this unneeded
needs_restart check. No functional change intended.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20220905101950.4606-1-linmiaohe@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The variable added is not effectively used in the function, so delete
it.
block/blk-map.c:273:16: warning: variable 'added' set but not used.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2049
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220905063253.120082-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While doing code coverage testing while CONFIG_BLK_DEV_THROTTLING_LOW is
disabled, we found that there are many codes can never be reached.
This patch move such codes inside "#ifdef CONFIG_BLK_DEV_THROTTLING_LOW".
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220903062826.1099085-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 16ede66973c84f890c03584f79158dd5b2d725f5.
This is causing issues with CPU stalls on my test box, revert it for
now until we understand what is going on. It looks like infinite
looping off sbitmap_queue_wake_up(), but hard to tell with a lot of
CPUs hitting this issue and the console scrolling infinitely.
Link: https://lore.kernel.org/linux-block/e742813b-ce5c-0d58-205b-1626f639b1bd@kernel.dk/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is useful for polled IO on a file, or for polled IO with the
io_uring passthrough mechanism. If bio allocations are done with
REQ_POLLED for those cases, then initializing the bio set with
BIOSET_PERCPU_CACHE enables the local per-cpu cache which eliminates
allocations (and frees) of bio structs when possible.
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Batched completions can clear multiple bits, but we're only decrementing
the wait_cnt by one each time. This can cause waiters to never be woken,
stalling IO. Use the batched count instead.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215679
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220825145312.1217900-1-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Avoid a kmalloc+kfree for each page array, if we only have a few pages
that are mapped. An alloc+free for each IO is quite expensive, and
it's pretty pointless if we're only dealing with 1 or a few vecs.
Use UIO_FASTIOV like we do in other spots to set a sane limit for how
big of an IO we want to avoid allocations for.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bdev based polled O_DIRECT is currently quite a bit faster than
passthru on the same device, and one of the reaons is that we're not
able to use the bio caching for passthru IO.
If REQ_POLLED is set on the request, use the fs bio set for grabbing a
bio from the caches, if available. This saves 5-6% of CPU over head
for polled passthru IO.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We don't need full ints for several of these members. Change the
page_order and nr_entries to unsigned shorts, and the true/false from_user
and null_mapped to booleans.
This shrinks the struct from 32 to 24 bytes on 64-bit archs.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
'bfqd' can be accessed through 'bfqq->bfqd', there is no need to pass
it as a parameter separately.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220816015631.1323948-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
'bfqq->bfqd' is ensured to set in bfq_init_queue(), and it will never
change afterwards.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220816015631.1323948-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While doing code coverage testing(CONFIG_BFQ_CGROUP_DEBUG is disabled), we
found that some functions doesn't have caller, thus remove them.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220816015631.1323948-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0,
change their return type into void. Most callers ignore the returned value
anyway.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org
[axboe: fold in fix from Bart]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Provide a mechanism to retrieve basic status information about
the device, including the "supported" flag indicating whether
SED-OPAL is supported. The information returned is from the various
feature descriptors received during the discovery0 step, and so
this ioctl does nothing more than perform the discovery0 step
and then save the information received. See "struct opal_status"
and OPAL_FL_* bits for the status information currently returned.
This is necessary to be able to check whether a device is OPAL
enabled, set up, locked or unlocked from userspace programs
like systemd-cryptsetup and libcryptsetup. Right now we just
have to assume the user 'knows' or blindly attempt setup/lock/unlock
operations.
Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220816140713.84893-1-luca.boccassi@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
"A few fixes that should go into this release:
- Small series of patches for ublk (ZiyangZhang)
- Remove dead function (Yu)
- Fix for running a block queue in case of resource starvation
(Yufen)"
* tag 'block-6.0-2022-08-19' of git://git.kernel.dk/linux-block:
blk-mq: run queue no matter whether the request is the last request
blk-mq: remove unused function blk_mq_queue_stopped()
ublk_drv: do not add a re-issued request aborted previously to ioucmd's task_work
ublk_drv: update comment for __ublk_fail_req()
ublk_drv: check ubq_daemon_is_dying() in __ublk_rq_task_work()
ublk_drv: update iod->addr for UBLK_IO_NEED_GET_DATA
|
|
We do test on a virtio scsi device (/dev/sda) and the default mq
scheduler is 'none'. We found a IO hung as following:
blk_finish_plug
blk_mq_plug_issue_direct
scsi_mq_get_budget
//get budget_token fail and sdev->restarts=1
scsi_end_request
scsi_run_queue_async
//sdev->restart=0 and run queue
blk_mq_request_bypass_insert
//add request to hctx->dispatch list
//continue to dispath plug list
blk_mq_dispatch_plug_list
blk_mq_try_issue_list_directly
//success issue all requests from plug list
After .get_budget fail, scsi_mq_get_budget will increase 'restarts'.
Normally, it will run hw queue when io complete and set 'restarts'
as 0. But if we run queue before adding request to the dispatch list
and blk_mq_dispatch_plug_list also success issue all requests, then
on one will run queue, and the request will be stall in the dispatch
list and cannot complete forever.
It is wrong to use last request of plug list to decide if run queue is
needed since all the remained requests in plug list may be from other
hctxs. To fix the bug, pass run_queue as true always to
blk_mq_request_bypass_insert().
Fix-suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Fixes: dc5fc361d891 ("block: attempt direct issue of plug list")
Link: https://lore.kernel.org/r/20220803023355.3687360-1-yuyufen@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_queue_stopped() doesn't have any caller, which was found by
code coverage test, thus remove it.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20220818063555.3741222-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request
- print nvme connect Linux error codes properly (Amit Engel)
- fix the fc_appid_store return value (Christoph Hellwig)
- fix a typo in an error message (Christophe JAILLET)
- add another non-unique identifier quirk (Dennis P. Kliem)
- check if the queue is allocated before stopping it in nvme-tcp
(Maurizio Lombardi)
- restart admin queue if the caller needs to restart queue in
nvme-fc (Ming Lei)
- use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang
Xiaoxu)
- __alloc_disk_node() error handling fix (Rafael)
* tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block:
block: Do not call blk_put_queue() if gendisk allocation fails
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
nvme-tcp: check if the queue is allocated before stopping it
nvme-fabrics: Fix a typo in an error message
nvme-fabrics: parse nvme connect Linux error codes
nvmet-auth: use kmemdup instead of kmalloc + memcpy
nvme-fc: fix the fc_appid_store return value
nvme-fc: restart admin queue if the caller needs to restart queue
|
|
Commit 6f8191fdf41d ("block: simplify disk shutdown") removed the call
to blk_get_queue() during gendisk allocation but missed to remove the
corresponding cleanup code blk_put_queue() for it. Thus, if the gendisk
allocation fails, the request_queue refcount gets decremented and
reaches 0, causing blk_mq_release() to be called with a hctx still
alive. That triggers a WARNING report, as found by syzkaller:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 23016 at block/blk-mq.c:3881
blk_mq_release+0xf8/0x3e0 block/blk-mq.c:3881
[...] stripped
RIP: 0010:blk_mq_release+0xf8/0x3e0 block/blk-mq.c:3881
[...] stripped
Call Trace:
<TASK>
blk_release_queue+0x153/0x270 block/blk-sysfs.c:780
kobject_cleanup lib/kobject.c:673 [inline]
kobject_release lib/kobject.c:704 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1c8/0x540 lib/kobject.c:721
__alloc_disk_node+0x4f7/0x610 block/genhd.c:1388
__blk_mq_alloc_disk+0x13b/0x1f0 block/blk-mq.c:3961
loop_add+0x3e2/0xaf0 drivers/block/loop.c:1978
loop_control_ioctl+0x133/0x620 drivers/block/loop.c:2150
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...] stripped
Fixes: 6f8191fdf41d ("block: simplify disk shutdown")
Reported-by: syzbot+31c9594f6e43b9289b25@syzkaller.appspotmail.com
Suggested-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220811232338.254673-1-rafaelmendsr@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
... doing revert if we end up not using some pages
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Equivalent of single-segment iovec. Initialized by iov_iter_ubuf(),
checked for by iter_is_ubuf(), otherwise behaves like ITER_IOVEC
ones.
We are going to expose the things like ->write_iter() et.al. to those
in subsequent commits.
New predicate (user_backed_iter()) that is true for ITER_IOVEC and
ITER_UBUF; places like direct-IO handling should use that for
checking that pages we modify after getting them from iov_iter_get_pages()
would need to be dirtied.
DO NOT assume that replacing iter_is_iovec() with user_backed_iter()
will solve all problems - there's code that uses iter_is_iovec() to
decide how to poke around in iov_iter guts and for that the predicate
replacement obviously won't suffice.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull block driver updates from Jens Axboe:
- NVMe pull requests via Christoph:
- add support for In-Band authentication (Hannes Reinecke)
- handle the persistent internal error AER (Michael Kelley)
- use in-capsule data for TCP I/O queue connect (Caleb Sander)
- remove timeout for getting RDMA-CM established event (Israel
Rukshin)
- misc cleanups (Joel Granados, Sagi Grimberg, Chaitanya Kulkarni,
Guixin Liu, Xiang wangx)
- use command_id instead of req->tag in trace_nvme_complete_rq()
(Bean Huo)
- various fixes for the new authentication code (Lukas Bulwahn,
Dan Carpenter, Colin Ian King, Chaitanya Kulkarni, Hannes
Reinecke)
- small cleanups (Liu Song, Christoph Hellwig)
- restore compat_ioctl support (Nick Bowler)
- make a nvmet-tcp workqueue lockdep-safe (Sagi Grimberg)
- enable generic interface (/dev/ngXnY) for unknown command sets
(Joel Granados, Christoph Hellwig)
- don't always build constants.o (Christoph Hellwig)
- print the command name of aborted commands (Christoph Hellwig)
- MD pull requests via Song:
- Improve raid5 lock contention, by Logan Gunthorpe.
- Misc fixes to raid5, by Logan Gunthorpe.
- Fix race condition with md_reap_sync_thread(), by Guoqing Jiang.
- Fix potential deadlock with raid5_quiesce and
raid5_get_active_stripe, by Logan Gunthorpe.
- Refactoring md_alloc(), by Christoph"
- Fix md disk_name lifetime problems, by Christoph Hellwig
- Convert prepare_to_wait() to wait_woken() api, by Logan
Gunthorpe;
- Fix sectors_to_do bitmap issue, by Logan Gunthorpe.
- Work on unifying the null_blk module parameters and configfs API
(Vincent)
- drbd bitmap IO error fix (Lars)
- Set of rnbd fixes (Guoqing, Md Haris)
- Remove experimental marker on bcache async device registration (Coly)
- Series from cleaning up the bio splitting (Christoph)
- Removal of the sx8 block driver. This hardware never really
widespread, and it didn't receive a lot of attention after the
initial merge of it back in 2005 (Christoph)
- A few fixes for s390 dasd (Eric, Jiang)
- Followup set of fixes for ublk (Ming)
- Support for UBLK_IO_NEED_GET_DATA for ublk (ZiyangZhang)
- Fixes for the dio dma alignment (Keith)
- Misc fixes and cleanups (Ming, Yu, Dan, Christophe
* tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block: (136 commits)
s390/dasd: Establish DMA alignment
s390/dasd: drop unexpected word 'for' in comments
ublk_drv: add support for UBLK_IO_NEED_GET_DATA
ublk_cmd.h: add one new ublk command: UBLK_IO_NEED_GET_DATA
ublk_drv: cleanup ublksrv_ctrl_dev_info
ublk_drv: add SET_PARAMS/GET_PARAMS control command
ublk_drv: fix ublk device leak in case that add_disk fails
ublk_drv: cancel device even though disk isn't up
block: fix leaking page ref on truncated direct io
block: ensure bio_iov_add_page can't fail
block: ensure iov_iter advances for added pages
drivers:md:fix a potential use-after-free bug
md/raid5: Ensure batch_last is released before sleeping for quiesce
md/raid5: Move stripe_request_ctx up
md/raid5: Drop unnecessary call to r5c_check_stripe_cache_usage()
md/raid5: Make is_inactive_blocked() helper
md/raid5: Refactor raid5_get_active_stripe()
block: pass struct queue_limits to the bio splitting helpers
block: move bio_allowed_max_sectors to blk-merge.c
block: move the call to get_max_io_size out of blk_bio_segment_split
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr).
The main driver change that might cause issues on down the road is the
conversion of some of our oldest surviving drivers to the DMA API
(should only affect m68k).
The only major core change is the rework of async resume; the rest are
either completely trivial or for updating deprecated APIs"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
scsi: target: Remove XDWRITEREAD emulated support
scsi: megaraid: Remove the static variable initialisation
scsi: ch: Do not initialise statics to 0
scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
scsi: target: iscsi: Do not require target authentication
scsi: target: iscsi: Allow AuthMethod=None
scsi: target: iscsi: Support base64 in CHAP
scsi: target: iscsi: Add support for extended CDB AHS
scsi: ufs: dt-bindings: Add SC8280XP binding
scsi: target: iscsi: Fix clang -Wformat warnings
scsi: ufs: core: Read device property for ref clock
scsi: libsas: Resume SAS host for phy reset or enable via sysfs
scsi: hisi_sas: Modify v3 HW SATA completion error processing
scsi: hisi_sas: Relocate DMA unmap of SMP task
scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements
scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()
scsi: mpi3mr: Delete a stray tab
scsi: mpi3mr: Unlock on error path
scsi: mpi3mr: Reduce VD queue depth on detecting throttling
scsi: mpi3mr: Resource Based Metering
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs iov_iter updates from Al Viro:
"Part 1 - isolated cleanups and optimizations.
One of the goals is to reduce the overhead of using ->read_iter() and
->write_iter() instead of ->read()/->write().
new_sync_{read,write}() has a surprising amount of overhead, in
particular inside iocb_flags(). That's the explanation for the
beginning of the series is in this pile; it's not directly
iov_iter-related, but it's a part of the same work..."
* tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
first_iovec_segment(): just return address
iov_iter: massage calling conventions for first_{iovec,bvec}_segment()
iov_iter: first_{iovec,bvec}_segment() - simplify a bit
iov_iter: lift dealing with maxpages out of first_{iovec,bvec}_segment()
iov_iter_get_pages{,_alloc}(): cap the maxsize with MAX_RW_COUNT
iov_iter_bvec_advance(): don't bother with bvec_iter
copy_page_{to,from}_iter(): switch iovec variants to generic
keep iocb_flags() result cached in struct file
iocb: delay evaluation of IS_SYNC(...) until we want to check IOCB_DSYNC
struct file: use anonymous union member for rcuhead and llist
btrfs: use IOMAP_DIO_NOSYNC
teach iomap_dio_rw() to suppress dsync
No need of likely/unlikely on calls of check_copy_size()
|
|
Pull folio updates from Matthew Wilcox:
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into
their own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
* tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache: (78 commits)
fs: remove the NULL get_block case in mpage_writepages
fs: don't call ->writepage from __mpage_writepage
fs: remove the nobh helpers
jfs: stop using the nobh helper
ext2: remove nobh support
ntfs3: refactor ntfs_writepages
mm/folio-compat: Remove migration compatibility functions
fs: Remove aops->migratepage()
secretmem: Convert to migrate_folio
hugetlb: Convert to migrate_folio
aio: Convert to migrate_folio
f2fs: Convert to filemap_migrate_folio()
ubifs: Convert to filemap_migrate_folio()
btrfs: Convert btrfs_migratepage to migrate_folio
mm/migrate: Add filemap_migrate_folio()
mm/migrate: Convert migrate_page() to migrate_folio()
nfs: Convert to migrate_folio
btrfs: Convert btree_migratepage to migrate_folio
mm/migrate: Convert expected_page_refs() to folio_expected_refs()
mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()
...
|
|
The size being added to a bio from an iov is aligned to a block size
after the pages were gotten. If the new aligned size truncates the last
page, its reference was being leaked. Ensure all pages that were not
added to the bio have their reference released.
Since this essentially requires doing the same that bio_put_pages(), and
there was only one caller for that function, this patch makes the
put_page() loop common for everyone.
Fixes: b1a000d3b8ec5 ("block: relax direct io memory alignment")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220712153256.2202024-3-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Adding the page could fail on the bio_full() condition, which checks for
either exceeding the bio's max segments or total size exceeding
UINT_MAX. We already ensure the max segments can't be exceeded, so just
ensure the total size won't reach the limit. This simplifies error
handling and removes unnecessary repeated bio_full() checks.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220712153256.2202024-2-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are cases where a bio may not accept additional pages, and the iov
needs to advance to the last data length that was accepted. The zone
append used to handle this correctly, but was inadvertently broken when
the setup was made common with the normal r/w case.
Fixes: 576ed9135489c ("block: use bio_add_page in bio_iov_iter_get_pages")
Fixes: c58c0074c54c2 ("block/bio: remove duplicate append pages code")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220712153256.2202024-1-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Allow using the splitting helpers on just a queue_limits instead of
a full request_queue structure. This will eventually allow file systems
or remapping drivers to split REQ_OP_ZONE_APPEND bios based on limits
calculated as the minimum common capabilities over multiple devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220727162300.3089193-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move this helper into the only file where it is used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220727162300.3089193-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prepare for reusing blk_bio_segment_split for (file system controlled)
splits of REQ_OP_ZONE_APPEND bios by letting the caller control the
maximum size of the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220727162300.3089193-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Only non-passthrough requests are split by the block layer and use the
->bio_split bio_set. Move it from the request_queue to the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220727162300.3089193-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The double indirect bio leads to somewhat suboptimal code generation.
Instead return the (original or split) bio, and make sure the
request_queue arguments to the lower level helpers is passed after the
bio to avoid constant reshuffling of the argument passing registers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220727162300.3089193-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The double indirect bio leads to somewhat suboptimal code generation.
Instead return the (original or split) bio, and make sure the
request_queue arguments to the lower level helpers is passed after the
bio to avoid constant reshuffling of the argument passing registers.
Also give it and the helpers used to implement it more descriptive names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220727162300.3089193-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
|
|
Use a folio throughout __buffer_migrate_folio(), add kernel-doc for
buffer_migrate_folio() and buffer_migrate_folio_norefs(), move their
declarations to buffer.h and switch all filesystems that have wired
them up.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
This relatively straightforward converion saves a call to compound_head()
hidden inside put_page().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
The bare use of '9' confuses some people. We also don't need this cast,
since the compiler does exactly that cast for us.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Set p->v to NULL if we try to read beyond the end of the disk, just like
we do if we get an error returned from trying to read the disk.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
That rather complicated expression is just trying to find the offset
of this sector within a page, and there are easier ways to express that.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
__blk_get_queue is only called by blk_get_queue, so merge the two.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220721063432.1714609-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
