summaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2023-04-13blk-iolatency: s/blkcg_rq_qos/iolat_rq_qos/Tejun Heo2-2/+2
The name was too generic given that there are multiple blkcg rq-qos policies. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20230413000649.115785-4-tj@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13blkcg: Restructure blkg_conf_prep() and friendsTejun Heo6-78/+127
We want to support lazy init of rq-qos policies so that iolatency is enabled lazily on configuration instead of gendisk initialization. The way blkg config helpers are structured now is a bit awkward for that. Let's restructure: * blkcg_conf_open_bdev() is renamed to blkg_conf_open_bdev(). The blkcg_ prefix was used because the bdev opening step is blkg-independent. However, the distinction is too subtle and confuses more than helps. Let's switch to blkg prefix so that it's consistent with the type and other helper names. * struct blkg_conf_ctx now remembers the original input string and is always initialized by the new blkg_conf_init(). * blkg_conf_open_bdev() is updated to take a pointer to blkg_conf_ctx like blkg_conf_prep() and can be called multiple times safely. Instead of modifying the double pointer to input string directly, blkg_conf_open_bdev() now sets blkg_conf_ctx->body. * blkg_conf_finish() is renamed to blkg_conf_exit() for symmetry and now must be called on all blkg_conf_ctx's which were initialized with blkg_conf_init(). Combined, this allows the users to either open the bdev first or do it altogether with blkg_conf_prep() which will help implementing lazy init of rq-qos policies. blkg_conf_init/exit() will also be used implement synchronization against device removal. This is necessary because iolat / iocost are configured through cgroupfs instead of one of the files under /sys/block/DEVICE. As cgroupfs operations aren't synchronized with block layer, the lazy init and other configuration operations may race against device removal. This patch makes blkg_conf_init/exit() used consistently for all cgroup-orginating configurations making them a good place to implement explicit synchronization. Users are updated accordingly. No behavior change is intended by this patch. v2: bfq wasn't updated in v1 causing a build error. Fixed. v3: Update the description to include future use of blkg_conf_init/exit() as synchronization points. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yu Kuai <yukuai1@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230413000649.115785-3-tj@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13blkcg: Drop unnecessary RCU read [un]locks from blkg_conf_prep/finish()Tejun Heo1-9/+4
Now that all RCU flavors have been combined either holding a spin lock, disabling irq or disabling preemption implies RCU read lock, so there's no need to use rcu_read_[un]lock() explicitly while holding queue_lock. This shouldn't cause any behavior changes. v2: Description updated. Leave __acquires/release on queue_lock alone. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230413000649.115785-2-tj@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13blk-mq-rdma: remove queue mapping helper for rdma devicesSagi Grimberg3-50/+0
No rdma device exposes its irq vectors affinity today. So the only mapping that we have left, is the default blk_mq_map_queues, which we fallback to anyways. Also fixup the only consumer of this helper (nvme-rdma). Remove this now dead code. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-04-06block: don't set GD_NEED_PART_SCAN if scan partition failedYu Kuai1-1/+7
Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still set, and partition scan will be proceed again when blkdev_get_by_dev() is called. However, this will cause a problem that re-assemble partitioned raid device will creat partition for underlying disk. Test procedure: mdadm -CR /dev/md0 -l 1 -n 2 /dev/sda /dev/sdb -e 1.0 sgdisk -n 0:0:+100MiB /dev/md0 blockdev --rereadpt /dev/sda blockdev --rereadpt /dev/sdb mdadm -S /dev/md0 mdadm -A /dev/md0 /dev/sda /dev/sdb Test result: underlying disk partition and raid partition can be observed at the same time Note that this can still happen in come corner cases that GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid device. Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again") Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-06blk-cgroup: delete cpd_init_fn of blkcg_policyChengming Zhou3-13/+2
blkcg_policy cpd_init_fn() is used to just initialize some default fields of policy data, which is enough to do in cpd_alloc_fn(). This patch delete the only user bfq_cpd_init(), and remove cpd_init_fn from blkcg_policy. Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230406145050.49914-4-zhouchengming@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-06blk-cgroup: delete cpd_bind_fn of blkcg_policyChengming Zhou2-22/+0
cpd_bind_fn is just used for update default weight when block subsys attached to a hierarchy. No any policy need it anymore. Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230406145050.49914-3-zhouchengming@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-06block, bfq: remove BFQ_WEIGHT_LEGACY_DFLChengming Zhou2-4/+1
BFQ_WEIGHT_LEGACY_DFL is the same as CGROUP_WEIGHT_DFL, which means we don't need cpd_bind_fn() callback to update default weight when attached to a hierarchy. This patch remove BFQ_WEIGHT_LEGACY_DFL and cpd_bind_fn(). Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230406145050.49914-2-zhouchengming@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-06ext4: Convert ext4_bio_write_page() to use a folioMatthew Wilcox1-0/+1
Remove several calls to compound_head() and the last caller of set_page_writeback_keepwrite(), so remove the wrapper too. Also export bio_add_folio() as this is the first caller from a module. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20230324180129.1220691-4-willy@infradead.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-04-05sed-opal: Add command to read locking range parameters.Ondrej Kozina1-0/+153
It returns following attributes: locking range start locking range length read lock enabled write lock enabled lock state (RW, RO or LK) It can be retrieved by user authority provided the authority was added to locking range via prior IOC_OPAL_ADD_USR_TO_LR ioctl command. The command was extended to add user in ACE that allows to read attributes listed above. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Link: https://lore.kernel.org/r/20230405111223.272816-6-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: add helper to get multiple columns at once.Ondrej Kozina1-8/+14
Refactors current code querying single column to use the new helper. Real multi column usage will be added later. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230405111223.272816-5-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: allow user authority to get locking range attributes.Ondrej Kozina2-0/+25
Extend ACE set of locking range attributes accessible to user authority. This patch allows user authority to get following locking range attribues when user get added to locking range via IOC_OPAL_ADD_USR_TO_LR: locking range start locking range end read lock enabled write lock enabled read locked write locked lock on reset active key Note: Admin1 authority always remains in the ACE. Otherwise it breaks current userspace expecting Admin1 in the ACE (sedutils). See TCG OPAL2 s.4.3.1.7 "ACE_Locking_RangeNNNN_Get_RangeStartToActiveKey". Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230405111223.272816-4-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: add helper for adding user authorities in ACE.Ondrej Kozina2-20/+77
Move ACE construction away from add_user_to_lr routine and refactor it to be used also in later code. Also adds boolean operators defines from TCG Core specification. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Link: https://lore.kernel.org/r/20230405111223.272816-3-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: do not add same authority twice in boolean ace.Ondrej Kozina1-16/+0
While adding user authority in boolean ace value of uid OPAL_LOCKINGRANGE_ACE_WRLOCKED or OPAL_LOCKINGRANGE_ACE_RDLOCKED, it was added twice. It seemed redundant when only single authority was added in the set method aka { authority1, authority1, OR }: TCG Storage Architecture Core Specification, 5.1.3.3 ACE_expression "This is an alternative type where the options are either a uidref to an Authority object or one of the boolean_ACE (AND = 0 and OR = 1) options. This type is used within the AC_element list to form a postfix Boolean expression of Authorities." Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230405111223.272816-2-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-04blk-mq: directly poll requestsKeith Busch1-3/+1
Polling needs a bio with a valid bi_bdev, but neither of those are guaranteed for polled driver requests. Make request based polling directly use blk-mq's polling function instead. When executing a request from a polled hctx, we know the request's cookie, and that it's from a live blk-mq queue that supports polling, so we can safely skip everything that bio_poll provides. Cc: stable@kernel.org Reported-by: Martin Belanger <Martin.Belanger@dell.com> Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Tested-by: Daniel Wagner <dwagner@suse.de> Revieded-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20230331180056.1155862-1-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-03Merge 6.3-rc5 into driver-core-nextGreg Kroah-Hartman6-27/+22
We need the fixes in here for testing, as well as the driver core changes for documentation updates to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-31driver core: class: remove dev_kobj from struct classGreg Kroah-Hartman1-1/+0
The dev_kobj field in struct class is now only written to, but never read from, so it can be removed as it is useless. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20230331093318.82288-5-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30iov_iter: add iter_iovec() helperJens Axboe1-2/+2
This returns a pointer to the current iovec entry in the iterator. Only useful with ITER_IOVEC right now, but it prepares us to treat ITER_UBUF and ITER_IOVEC identically for the first segment. Rename struct iov_iter->iov to iov_iter->__iov to find any potentially troublesome spots, and also to prevent anyone from adding new code that accesses iter->iov directly. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-29block: ensure bio_alloc_map_data() deals with ITER_UBUF correctlyJens Axboe1-2/+3
This helper blindly copies the iovec, even if we don't have one. Make this case a bit smarter by only doing so if we have an iovec array to copy. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-27block: open code __blk_account_io_done()Chaitanya Kulkarni1-13/+9
There is only one caller for __blk_account_io_done(), the function is small enough to fit in its caller blk_account_io_done(). Remove the function and opencode in the its caller blk_account_io_done(). Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20230327073427.4403-2-kch@nvidia.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-27block: open code __blk_account_io_start()Chaitanya Kulkarni1-20/+16
There is only one caller for __blk_account_io_start(), the function is small enough to fit in its caller blk_account_io_start(). Remove the function and opencode in the its caller blk_account_io_start(). Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20230327073427.4403-2-kch@nvidia.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-20blk-mq: remove hybrid pollingKeith Busch5-273/+7
io_uring provides the only way user space can poll completions, and that always sets BLK_POLL_NOSLEEP. This effectively makes hybrid polling dead code, so remove it and everything supporting it. Hybrid polling was effectively killed off with 9650b453a3d4b1, "block: ignore RWF_HIPRI hint for sync dio", but still potentially reachable through io_uring until d729cf9acb93119, "io_uring: don't sleep when polling for I/O", but hybrid polling probably should not have been reachable through that async interface from the beginning. Fixes: 9650b453a3d4 ("block: ignore RWF_HIPRI hint for sync dio") Fixes: d729cf9acb93 ("io_uring: don't sleep when polling for I/O") Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20230320194926.3353144-1-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-17driver core: class: remove module * from class_create()Greg Kroah-Hartman1-1/+1
The module pointer in class_create() never actually did anything, and it shouldn't have been requred to be set as a parameter even if it did something. So just remove it and fix up all callers of the function in the kernel tree at the same time. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16block: remove obsolete config BLOCK_COMPATLukas Bulwahn1-3/+0
Before commit bdc1ddad3e5f ("compat_ioctl: block: move blkdev_compat_ioctl() into ioctl.c"), the config BLOCK_COMPAT was used to include compat_ioctl.c into the kernel build. With this commit, the code is moved into ioctl.c and included with the config COMPAT. So, since then, the config BLOCK_COMPAT has no effect and any further purpose. Remove this obsolete config BLOCK_COMPAT. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230316111630.4897-1-lukas.bulwahn@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16blk-crypto: drop the NULL check from blk_crypto_put_keyslot()Eric Biggers1-10/+4
Now that all callers of blk_crypto_put_keyslot() check for NULL before calling it, there is no need for blk_crypto_put_keyslot() to do the NULL check itself. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16blk-mq: return actual keyslot error in blk_insert_cloned_request()Eric Biggers1-2/+3
To avoid hiding information, pass on the error code from blk_crypto_rq_get_keyslot() instead of always using BLK_STS_IOERR. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16blk-crypto: remove blk_crypto_insert_cloned_request()Eric Biggers2-16/+1
blk_crypto_insert_cloned_request() is the same as blk_crypto_rq_get_keyslot(), so just use that directly. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16blk-crypto: make blk_crypto_evict_key() more robustEric Biggers2-33/+41
If blk_crypto_evict_key() sees that the key is still in-use (due to a bug) or that ->keyslot_evict failed, it currently just returns while leaving the key linked into the keyslot management structures. However, blk_crypto_evict_key() is only called in contexts such as inode eviction where failure is not an option. So actually the caller proceeds with freeing the blk_crypto_key regardless of the return value of blk_crypto_evict_key(). These two assumptions don't match, and the result is that there can be a use-after-free in blk_crypto_reprogram_all_keys() after one of these errors occurs. (Note, these errors *shouldn't* happen; we're just talking about what happens if they do anyway.) Fix this by making blk_crypto_evict_key() unlink the key from the keyslot management structures even on failure. Also improve some comments. Fixes: 1b2628397058 ("block: Keyslot Manager for Inline Encryption") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16blk-crypto: make blk_crypto_evict_key() return voidEric Biggers1-11/+9
blk_crypto_evict_key() is only called in contexts such as inode eviction where failure is not an option. So there is nothing the caller can do with errors except log them. (dm-table.c does "use" the error code, but only to pass on to upper layers, so it doesn't really count.) Just make blk_crypto_evict_key() return void and log errors itself. Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16blk-mq: release crypto keyslot before reporting I/O completeEric Biggers4-17/+49
Once all I/O using a blk_crypto_key has completed, filesystems can call blk_crypto_evict_key(). However, the block layer currently doesn't call blk_crypto_put_keyslot() until the request is being freed, which happens after upper layers have been told (via bio_endio()) the I/O has completed. This causes a race condition where blk_crypto_evict_key() can see 'slot_refs != 0' without there being an actual bug. This makes __blk_crypto_evict_key() hit the 'WARN_ON_ONCE(atomic_read(&slot->slot_refs) != 0)' and return without doing anything, eventually causing a use-after-free in blk_crypto_reprogram_all_keys(). (This is a very rare bug and has only been seen when per-file keys are being used with fscrypt.) There are two options to fix this: either release the keyslot before bio_endio() is called on the request's last bio, or make __blk_crypto_evict_key() ignore slot_refs. Let's go with the first solution, since it preserves the ability to report bugs (via WARN_ON_ONCE) where a key is evicted while still in-use. Fixes: a892c8d52c02 ("block: Inline encryption support for blk-mq") Cc: stable@vger.kernel.org Reviewed-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-15block: count 'ios' and 'sectors' when io is done for bio-based deviceYu Kuai1-10/+6
While using iostat for raid, I observed very strange 'await' occasionally, and turns out it's due to that 'ios' and 'sectors' is counted in bdev_start_io_acct(), while 'nsecs' is counted in bdev_end_io_acct(). I'm not sure why they are ccounted like that but I think this behaviour is obviously wrong because user will get wrong disk stats. Fix the problem by counting 'ios' and 'sectors' when io is done, like what rq-based device does. Fixes: 394ffa503bc4 ("blk: introduce generic io stat accounting help function") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230223091226.1135678-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-14blk-mq: fix "bad unlock balance detected" on q->srcu in ↵Chris Leech1-2/+3
__blk_mq_run_dispatch_ops The 'q' parameter of the macro __blk_mq_run_dispatch_ops may not be one local variable, such as, it is rq->q, then request queue pointed by this variable could be changed to another queue in case of BLK_MQ_F_TAG_QUEUE_SHARED after 'dispatch_ops' returns, then 'bad unlock balance' is triggered. Fixes the issue by adding one local variable for doing srcu lock/unlock. Fixes: 2a904d00855f ("blk-mq: remove hctx_lock and hctx_unlock") Cc: Marco Patalano <mpatalan@redhat.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230310010913.1014789-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-14block: do not reverse request order when flushing plug listJan Kara1-2/+3
Commit 26fed4ac4eab ("block: flush plug based on hardware and software queue order") changed flushing of plug list to submit requests one device at a time. However while doing that it also started using list_add_tail() instead of list_add() used previously thus effectively submitting requests in reverse order. Also when forming a rq_list with remaining requests (in case two or more devices are used), we effectively reverse the ordering of the plug list for each device we process. Submitting requests in reverse order has negative impact on performance for rotational disks (when BFQ is not in use). We observe 10-25% regression in random 4k write throughput, as well as ~20% regression in MariaDB OLTP benchmark on rotational storage on btrfs filesystem. Fix the problem by preserving ordering of the plug list when inserting requests into the queuelist as well as by appending to requeue_list instead of prepending to it. Fixes: 26fed4ac4eab ("block: flush plug based on hardware and software queue order") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230313093002.11756-1-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-08block, bfq: fix uaf for 'stable_merge_bfqq'Yu Kuai1-9/+9
Before commit fd571df0ac5b ("block, bfq: turn bfqq_data into an array in bfq_io_cq"), process reference is read before bfq_put_stable_ref(), and it's safe if bfq_put_stable_ref() put the last reference, because process reference will be 0 and 'stable_merge_bfqq' won't be accessed in this case. However, the commit changed the order and will cause uaf for 'stable_merge_bfqq'. In order to emphasize that bfq_put_stable_ref() can drop the last reference, fix the problem by moving bfq_put_stable_ref() to the end of bfq_setup_stable_merge(). Fixes: fd571df0ac5b ("block, bfq: turn bfqq_data into an array in bfq_io_cq") Reported-and-tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/linux-block/20230307071448.rzihxbm4jhbf5krj@shindev/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-07block: fix wrong mode for blkdev_put() from disk_scan_partitions()Yu Kuai1-1/+1
If disk_scan_partitions() is called with 'FMODE_EXCL', blkdev_get_by_dev() will be called without 'FMODE_EXCL', however, follow blkdev_put() is still called with 'FMODE_EXCL', which will cause 'bd_holders' counter to leak. Fix the problem by using the right mode for blkdev_put(). Reported-by: syzbot+2bcc0d79e548c4f62a59@syzkaller.appspotmail.com Link: https://lore.kernel.org/lkml/f9649d501bc8c3444769418f6c26263555d9d3be.camel@linux.ibm.com/T/ Tested-by: Julian Ruess <julianr@linux.ibm.com> Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-06driver core: remove CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2Greg Kroah-Hartman1-12/+7
CONFIG_SYSFS_DEPRECATED was added in commit 88a22c985e35 ("CONFIG_SYSFS_DEPRECATED") in 2006 to allow systems with older versions of some tools (i.e. Fedora 3's version of udev) to boot properly. Four years later, in 2010, the option was attempted to be removed as most of userspace should have been fixed up properly by then, but some kernel developers clung to those old systems and refused to update, so we added CONFIG_SYSFS_DEPRECATED_V2 in commit e52eec13cd6b ("SYSFS: Allow boot time switching between deprecated and modern sysfs layout") to allow them to continue to boot properly, and we allowed a boot time parameter to be used to switch back to the old format if needed. Over time, the logic that was covered under these config options was slowly removed from individual driver subsystems successfully, removed, and the only thing that is now left in the kernel are some changes in the block layer's representation in sysfs where real directories are used instead of symlinks like normal. Because the original changes were done to userspace tools in 2006, and all distros that use those tools are long end-of-life, and older non-udev-based systems do not care about the block layer's sysfs representation, it is time to finally remove this old logic and the config entries from the kernel. Cc: Jonathan Corbet <corbet@lwn.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: linux-block@vger.kernel.org Cc: linux-doc@vger.kernel.org Acked-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/20230223073326.2073220-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-03Merge tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linuxLinus Torvalds10-45/+77
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - Don't access released socket during error recovery (Akinobu Mita) - Bring back auto-removal of deleted namespaces during sequential scan (Christoph Hellwig) - Fix an error code in nvme_auth_process_dhchap_challenge (Dan Carpenter) - Show well known discovery name (Daniel Wagner) - Add a missing endianess conversion in effects masking (Keith Busch) - Fix for a regression introduced in blk-rq-qos during init in this merge window (Breno) - Reorder a few fields in struct blk_mq_tag_set, eliminating a few holes and shrinking it (Christophe) - Remove redundant bdev_get_queue() NULL checks (Juhyung) - Add sed-opal single user mode support flag (Luca) - Remove SQE128 check in ublk as it isn't needed, saving some memory (Ming) - Op specific segment checking for cloned requests (Uday) - Exclusive open partition scan fixes (Yu) - Loop offset/size checking before assigning them in the device (Zhong) - Bio polling fixes (me) * tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux: blk-mq: enforce op-specific segment limits in blk_insert_cloned_request nvme-fabrics: show well known discovery name nvme-tcp: don't access released socket during error recovery nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge() nvme: bring back auto-removal of deleted namespaces during sequential scan blk-iocost: Pass gendisk to ioc_refresh_params nvme: fix sparse warning on effects masking block: be a bit more careful in checking for NULL bdev while polling block: clear bio->bi_bdev when putting a bio back in the cache loop: loop_set_status_from_info() check before assignment ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd block: remove more NULL checks after bdev_get_queue() blk-mq: Reorder fields in 'struct blk_mq_tag_set' block: fix scan partition for exclusively open device again block: Revert "block: Do not reread partition table on exclusively open device" sed-opal: add support flag for SUM in status ioctl
2023-03-02blk-mq: enforce op-specific segment limits in blk_insert_cloned_requestUday Shankar3-10/+11
The block layer might merge together discard requests up until the max_discard_segments limit is hit, but blk_insert_cloned_request checks the segment count against max_segments regardless of the req op. This can result in errors like the following when discards are issued through a DM device and max_discard_segments exceeds max_segments for the queue of the chosen underlying device. blk_insert_cloned_request: over max segments limit. (256 > 129) Fix this by looking at the req_op and enforcing the appropriate segment limit - max_discard_segments for REQ_OP_DISCARDs and max_segments for everything else. Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230301000655.48112-1-ushankar@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-28blk-iocost: Pass gendisk to ioc_refresh_paramsBreno Leitao1-6/+20
Current kernel (d2980d8d826554fa6981d621e569a453787472f8) crashes when blk_iocost_init for `nvme1` disk. BUG: kernel NULL pointer dereference, address: 0000000000000050 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page blk_iocost_init (include/asm-generic/qspinlock.h:128 include/linux/spinlock.h:203 include/linux/spinlock_api_smp.h:158 include/linux/spinlock.h:400 block/blk-iocost.c:2884) ioc_qos_write (block/blk-iocost.c:3198) ? kretprobe_perf_func (kernel/trace/trace_kprobe.c:1566) ? kernfs_fop_write_iter (include/linux/slab.h:584 fs/kernfs/file.c:311) ? __kmem_cache_alloc_node (mm/slab.h:? mm/slub.c:3452 mm/slub.c:3491) ? _copy_from_iter (arch/x86/include/asm/uaccess_64.h:46 arch/x86/include/asm/uaccess_64.h:52 lib/iov_iter.c:183 lib/iov_iter.c:628) ? kretprobe_dispatcher (kernel/trace/trace_kprobe.c:1693) cgroup_file_write (kernel/cgroup/cgroup.c:4061) kernfs_fop_write_iter (fs/kernfs/file.c:334) vfs_write (include/linux/fs.h:1849 fs/read_write.c:491 fs/read_write.c:584) ksys_write (fs/read_write.c:637) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) This happens because ioc_refresh_params() is being called without a properly initialized ioc->rqos, which is happening later in the callee side. ioc_refresh_params() -> ioc_autop_idx() tries to access ioc->rqos.disk->queue but ioc->rqos.disk is NULL, causing the BUG above. Create function, called ioc_refresh_params_disk(), that is similar to ioc_refresh_params() but where the "struct gendisk" could be passed as an explicit argument. This function will be called when ioc->rqos.disk is not initialized. Fixes: ce57b558604e ("blk-rq-qos: make rq_qos_add and rq_qos_del more useful") Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230228111654.1778120-1-leitao@debian.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-24Merge tag 'driver-core-6.3-rc1' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ...
2023-02-24block: be a bit more careful in checking for NULL bdev while pollingJens Axboe1-2/+8
Wei reports a crash with an application using polled IO: PGD 14265e067 P4D 14265e067 PUD 47ec50067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 21915 Comm: iocore_0 Kdump: loaded Tainted: G S 5.12.0-0_fbk12_clang_7346_g1bb6f2e7058f #1 Hardware name: Wiwynn Delta Lake MP T8/Delta Lake-Class2, BIOS Y3DLM08 04/10/2022 RIP: 0010:bio_poll+0x25/0x200 Code: 0f 1f 44 00 00 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 28 65 48 8b 04 25 28 00 00 00 48 89 44 24 20 48 8b 47 08 <48> 8b 80 70 02 00 00 4c 8b 70 50 8b 6f 34 31 db 83 fd ff 75 25 65 RSP: 0018:ffffc90005fafdf8 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 74b43cd65dd66600 RDX: 0000000000000003 RSI: ffffc90005fafe78 RDI: ffff8884b614e140 RBP: ffff88849964df78 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88849964df00 R13: ffffc90005fafe78 R14: ffff888137d3c378 R15: 0000000000000001 FS: 00007fd195000640(0000) GS:ffff88903f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000270 CR3: 0000000466121001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: iocb_bio_iopoll+0x1d/0x30 io_do_iopoll+0xac/0x250 __se_sys_io_uring_enter+0x3c5/0x5a0 ? __x64_sys_write+0x89/0xd0 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x94f225d Code: 24 cc 00 00 00 41 8b 84 24 d0 00 00 00 c1 e0 04 83 e0 10 41 09 c2 8b 33 8b 53 04 4c 8b 43 18 4c 63 4b 0c b8 aa 01 00 00 0f 05 <85> c0 0f 88 85 00 00 00 29 03 45 84 f6 0f 84 88 00 00 00 41 f6 c7 RSP: 002b:00007fd194ffcd88 EFLAGS: 00000202 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 00007fd194ffcdc0 RCX: 00000000094f225d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000007 RBP: 00007fd194ffcdb0 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000001 R11: 0000000000000202 R12: 00007fd269d68030 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 which is due to bio->bi_bdev being NULL. This can happen if we have two tasks doing polled IO, and task B ends up completing IO from task A if they are sharing a poll queue. If task B completes the IO and puts the bio into our cache, then it can allocate that bio again before task A is done polling for it. As that would necessitate a preempt between the two tasks, it's enough to just be a bit more careful in checking for whether or not bio->bi_bdev is NULL. Reported-and-tested-by: Wei Zhang <wzhang@meta.com> Cc: stable@vger.kernel.org Fixes: be4d234d7aeb ("bio: add allocation cache abstraction") Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-24block: clear bio->bi_bdev when putting a bio back in the cacheJens Axboe1-0/+1
This isn't strictly needed in terms of correctness, but it does allow polling to know if the bio has been put already by a different task and hence avoid polling something that we don't need to. Cc: stable@vger.kernel.org Fixes: be4d234d7aeb ("bio: add allocation cache abstraction") Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-23Merge tag 'mm-stable-2023-02-20-13-37' of ↵Linus Torvalds1-78/+0
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Daniel Verkamp has contributed a memfd series ("mm/memfd: add F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". * tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits) include/linux/migrate.h: remove unneeded externs mm/memory_hotplug: cleanup return value handing in do_migrate_range() mm/uffd: fix comment in handling pte markers mm: change to return bool for isolate_movable_page() mm: hugetlb: change to return bool for isolate_hugetlb() mm: change to return bool for isolate_lru_page() mm: change to return bool for folio_isolate_lru() objtool: add UACCESS exceptions for __tsan_volatile_read/write kmsan: disable ftrace in kmsan core code kasan: mark addr_has_metadata __always_inline mm: memcontrol: rename memcg_kmem_enabled() sh: initialize max_mapnr m68k/nommu: add missing definition of ARCH_PFN_OFFSET mm: percpu: fix incorrect size in pcpu_obj_full_size() maple_tree: reduce stack usage with gcc-9 and earlier mm: page_alloc: call panic() when memoryless node allocation fails mm: multi-gen LRU: avoid futile retries migrate_pages: move THP/hugetlb migration support check to simplify code migrate_pages: batch flushing TLB migrate_pages: share more code between _unmap and _move ...
2023-02-22Merge tag '6.3-rc-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds2-7/+7
Pull cifs client updates from Steve French: "The largest subset of this is from David Howells et al: making the cifs/smb3 driver pass iov_iters down to the lowest layers, directly to the network transport rather than passing lists of pages around, helping multiple areas: - Pin user pages, thereby fixing the race between concurrent DIO read and fork, where the pages containing the DIO read buffer may end up belonging to the child process and not the parent - with the result that the parent might not see the retrieved data. - cifs shouldn't take refs on pages extracted from non-user-backed iterators (eg. KVEC). With these changes, cifs will apply the appropriate cleanup. - Making it easier to transition to using folios in cifs rather than pages by dealing with them through BVEC and XARRAY iterators. - Allowing cifs to use the new splice function The remainder are: - fixes for stable, including various fixes for uninitialized memory, wrong length field causing mount issue to very old servers, important directory lease fixes and reconnect fixes - cleanups (unused code removal, change one element array usage, and a change form strtobool to kstrtobool, and Kconfig cleanups) - SMBDIRECT (RDMA) fixes including iov_iter integration and UAF fixes - reconnect fixes - multichannel fixes, including improving channel allocation (to least used channel) - remove the last use of lock_page_killable by moving to folio_lock_killable" * tag '6.3-rc-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (46 commits) update internal module version number for cifs.ko cifs: update ip_addr for ses only for primary chan setup cifs: use tcon allocation functions even for dummy tcon cifs: use the least loaded channel for sending requests cifs: DIO to/from KVEC-type iterators should now work cifs: Remove unused code cifs: Build the RDMA SGE list directly from an iterator cifs: Change the I/O paths to use an iterator rather than a page list cifs: Add a function to read into an iter from a socket cifs: Add some helper functions cifs: Add a function to Hash the contents of an iterator cifs: Add a function to build an RDMA SGE list from an iterator netfs: Add a function to extract an iterator into a scatterlist netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator cifs: Implement splice_read to pass down ITER_BVEC not ITER_PIPE splice: Export filemap/direct_splice_read() iov_iter: Add a function to extract a page list from an iterator iov_iter: Define flags to qualify page extraction. splice: Add a func to do a splice from an O_DIRECT file without ITER_PIPE splice: Add a func to do a splice from a buffered file without ITER_PIPE ...
2023-02-22Merge tag 'ata-6.3-rc1' of ↵Linus Torvalds1-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA updates from Damien Le Moal: - Small cleanup of the pata_octeon driver to drop a useless platform callback (Uwe) - Simplify ata_scsi_cmd_error_handler() code using the fact that ap->ops->error_handler is NULL most of the time (Wenchao) - Several patches improving libata error handling. This is in preparation for supporting the command duration limits (CDL) feature. The changes allow handling corner cases of ATA NCQ errors which do not happen with regular drives but will be triggered with CDL drives (Niklas) - Simplify the qc_fill_rtf operation (me) - Improve SCSI command translation for REPORT_SUPPORTED_OPERATION_CODES command (me) - Cleanup of libata FUA handling. This falls short of enabling FUA for ATA drives that support it by default as there were concerns that old drives would break. The series however fixes several issues with the FUA support to ensure that FUA is reported as being supported only for drives that can handle all possible write cases (NCQ and non-NCQ). A check in the block layer is also added to ensure that we never see read FUA commands (current behavior) (me) - Several patches to move the old PARIDE (parallel port IDE) driver to libata as pata_parport. Given that this driver also needs protocol modules, the driver code resides in its own pata_parport directoy under drivers/ata (Ondrej) * tag 'ata-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_parport: Fix ida_alloc return value error check drivers/block: Move PARIDE protocol modules to drivers/ata/pata_parport drivers/block: Remove PARIDE core and high-level protocols ata: pata_parport: add driver (PARIDE replacement) ata: libata: exclude FUA support for known buggy drives ata: libata: Fix FUA handling in ata_build_rw_tf() ata: libata: cleanup fua support detection ata: libata: Rename and cleanup ata_rwcmd_protocol() ata: libata: Introduce ata_ncq_supported() block: add a sanity check for non-write flush/fua bios ata: libata-scsi: improve ata_scsiop_maint_in() ata: libata-scsi: do not overwrite SCSI ML and status bytes ata: libata: move NCQ related ATA_DFLAGs ata: libata: respect successfully completed commands during errors ata: libata: read the shared status for successful NCQ commands once ata: libata: simplify qc_fill_rtf port operation interface ata: scsi: rename flag ATA_QCFLAG_FAILED to ATA_QCFLAG_EH ata: libata-eh: Cleanup ata_scsi_cmd_error_handler() ata: octeon: Drop empty platform remove function
2023-02-21Merge tag 'irq-core-2023-02-20' of ↵Linus Torvalds1-50/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Core: - Move the interrupt affinity spreading mechanism into lib/group_cpus so it can be used for similar spreading requirements, e.g. in the block multi-queue code This also contains a first usecase in the block multi-queue code which Jens asked to take along with the librarization - Improve irqdomain locking to close a number race conditions which can be observed with massive parallel device driver probing - Enforce and document the semantics of disable_irq() which cannot be invoked safely from non-sleepable context - Move the IPI multiplexing code from the Apple AIC driver into the core, so it can be reused by RISCV Drivers: - Plug OF node refcounting leaks in various drivers - Correctly mark level triggered interrupts in the Broadcom L2 drivers - The usual small fixes and improvements - No new drivers for the record!" * tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts irqdomain: Switch to per-domain locking irqchip/mvebu-odmi: Use irq_domain_create_hierarchy() irqchip/loongson-pch-msi: Use irq_domain_create_hierarchy() irqchip/gic-v3-mbi: Use irq_domain_create_hierarchy() irqchip/gic-v3-its: Use irq_domain_create_hierarchy() irqchip/gic-v2m: Use irq_domain_create_hierarchy() irqchip/alpine-msi: Use irq_domain_add_hierarchy() x86/uv: Use irq_domain_create_hierarchy() x86/ioapic: Use irq_domain_create_hierarchy() irqdomain: Clean up irq_domain_push/pop_irq() irqdomain: Drop leftover brackets irqdomain: Drop dead domain-name assignment irqdomain: Drop revmap mutex irqdomain: Fix domain registration race irqdomain: Fix mapping-creation race irqdomain: Refactor __irq_domain_alloc_irqs() irqdomain: Look for existing mapping only once irqdomain: Drop bogus fwspec-mapping error handling ...
2023-02-21block: remove more NULL checks after bdev_get_queue()Juhyung Park1-10/+0
bdev_get_queue() never returns NULL. Several commits [1][2] have been made before to remove such superfluous checks, but some still remained. For places where bdev_get_queue() is called solely for NULL checks, it is removed entirely. [1] commit ec9fd2a13d74 ("blk-lib: don't check bdev_get_queue() NULL check") [2] commit fea127b36c93 ("block: remove superfluous check for request queue in bdev_is_zoned()") Signed-off-by: Juhyung Park <qkrwngud825@gmail.com> Reviewed-by: Pankaj Raghav <p.raghav@samsung.com> Link: https://lore.kernel.org/r/20230203024029.48260-1-qkrwngud825@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-20iov_iter: Define flags to qualify page extraction.David Howells2-7/+7
Define flags to qualify page extraction to pass into iov_iter_*_pages*() rather than passing in FOLL_* flags. For now only a flag to allow peer-to-peer DMA is supported. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> cc: Al Viro <viro@zeniv.linux.org.uk> cc: Logan Gunthorpe <logang@deltatee.com> cc: linux-fsdevel@vger.kernel.org cc: linux-block@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2023-02-20Merge tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linuxLinus Torvalds34-780/+1128
Pull block updates from Jens Axboe: - NVMe updates via Christoph: - Small improvements to the logging functionality (Amit Engel) - Authentication cleanups (Hannes Reinecke) - Cleanup and optimize the DMA mapping cod in the PCIe driver (Keith Busch) - Work around the command effects for Format NVM (Keith Busch) - Misc cleanups (Keith Busch, Christoph Hellwig) - Fix and cleanup freeing single sgl (Keith Busch) - MD updates via Song: - Fix a rare crash during the takeover process - Don't update recovery_cp when curr_resync is ACTIVE - Free writes_pending in md_stop - Change active_io to percpu - Updates to drbd, inching us closer to unifying the out-of-tree driver with the in-tree one (Andreas, Christoph, Lars, Robert) - BFQ update adding support for multi-actuator drives (Paolo, Federico, Davide) - Make brd compliant with REQ_NOWAIT (me) - Fix for IOPOLL and queue entering, fixing stalled IO waiting on timeouts (me) - Fix for REQ_NOWAIT with multiple bios (me) - Fix memory leak in blktrace cleanup (Greg) - Clean up sbitmap and fix a potential hang (Kemeng) - Clean up some bits in BFQ, and fix a bug in the request injection (Kemeng) - Clean up the request allocation and issue code, and fix some bugs related to that (Kemeng) - ublk updates and fixes: - Add support for unprivileged ublk (Ming) - Improve device deletion handling (Ming) - Misc (Liu, Ziyang) - s390 dasd fixes (Alexander, Qiheng) - Improve utility of request caching and fixes (Anuj, Xiao) - zoned cleanups (Pankaj) - More constification for kobjs (Thomas) - blk-iocost cleanups (Yu) - Remove bio splitting from drivers that don't need it (Christoph) - Switch blk-cgroups to use struct gendisk. Some of this is now incomplete as select late reverts were done. (Christoph) - Add bvec initialization helpers, and convert callers to use that rather than open-coding it (Christoph) - Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin, Matthew, Ulf, Zhong) * tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits) brd: use radix_tree_maybe_preload instead of radix_tree_preload block: use proper return value from bio_failfast() block: bio-integrity: Copy flags when bio_integrity_payload is cloned block: Fix io statistics for cgroup in throttle path brd: mark as nowait compatible brd: check for REQ_NOWAIT and set correct page allocation mask brd: return 0/-error from brd_insert_page() block: sync mixed merged request's failfast with 1st bio's Revert "blk-cgroup: pin the gendisk in struct blkcg_gq" Revert "blk-cgroup: pass a gendisk to blkg_lookup" Revert "blk-cgroup: delay blk-cgroup initialization until add_disk" Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release" Revert "blk-cgroup: move the cgroup information to struct gendisk" nvme-pci: remove iod use_sgls nvme-pci: fix freeing single sgl block: ublk: check IO buffer based on flag need_get_data s390/dasd: Fix potential memleak in dasd_eckd_init() s390/dasd: sort out physical vs virtual pointers usage block: Remove the ALLOC_CACHE_SLACK constant block: make kobj_type structures constant ...
2023-02-20Merge tag 'for-6.3/iter-ubuf-2023-02-16' of git://git.kernel.dk/linuxLinus Torvalds1-4/+4
Pull io_uring ITER_UBUF conversion from Jens Axboe: "Since we now have ITER_UBUF available, switch to using it for single ranges as it's more efficient than ITER_IOVEC for that" * tag 'for-6.3/iter-ubuf-2023-02-16' of git://git.kernel.dk/linux: block: use iter_ubuf for single range iov_iter: move iter_ubuf check inside restore WARN io_uring: use iter_ubuf for single range imports io_uring: switch network send/recv to ITER_UBUF iov: add import_ubuf()
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 13:26:48 +0000